Distribution   Switches connecting
       / Layer /      racks in a pod, and
      /       /       connecting pods
     /       /
  +-+-+   +-+-+       Mutual backup TOR
+-+TOR+---+TOR+-+     switches
| +---+   +---+ |
| +-----------+ |
+-+    host   +-+     Each host has two
| +-----------+ |     Ethernet interfaces
+-+    host   +-+     with separate subnets
| +-----------+ |
| .           . |
| .           . |
| .           . |     Design premise: complete
| +-----------+ |     redundancy, with every
+-+    host   +-+     switch and every cable
| +-----------+ |     backed up by a doppelganger
+-+    host   +-+
  +-----------+

Figure 1: Typical Rack Design

3.2.1. Tenant Address Model

Tenant resources need to be told, by configuration or naming, the addresses of resources they communicate with. This is true regardless of their location or relationship to a given tenant. In environments with well-known addresses, this becomes complex and unscalable. This was learned very early with Internet hostnames; a single 'hostfile' was maintained by a central entity and updated daily, which quickly became unwieldy. The result was the development of the Domain Name System; the level of indirection between names and addresses improved scalability. It also facilitated ongoing maintenance. If a service needed multiple servers, or a server needed to change its address, that was trivially solved by changing the DNS Resource Record; every resource that needed the new address would obtain it the next time it queried the DNS. It has also facilitated the IPv4/IPv6 transition; a resource that has an IPv6 address is given a AAAA record in addition to, or to replace, its IPv4 A record.

Similarly, today's reliance on NAPT technology frequently limits the capabilities of an application. It works reasonably well for a client accessing a client/server application when the protocol does not carry addressing information. If there is an expectation that one resource's private address will be meaningful to a peer, such as when an SIP client presents its address in SDP or an HTTP server presents an address in a redirection, either the resource needs to understand the difference between an 'inside' and an 'outside' address and know which is which, or it needs a traversal algorithm that changes the addresses. For peer-to-peer applications, this ultimately means providing a network design in which those issues don't apply.

IPv6 provides global addresses, enough of them that there is no real expectation of running out any time soon, making these issues go away. In addition, with the IPv4 address space running out, both globally and within today's large datacenters, there aren't necessarily addresses available for an IPv4 application to use, even as a floating IP address.

Hence, the model we propose is that a resource in a tenant is told the addresses of the other resources with which it communicates. They are IPv6 addresses, and the data center takes care to ensure that inappropriate communications do not take place.

3.2.1.1. Use of Global Unicast Addresses by Tenants

A unicast address in an IP network identifies a topological location, by association with an IP prefix (which might be for a subnet or any aggregate of subnets). It also identifies a single interface located within that subnet, which may or may not be instantiated at the time. We assume that there is a subnet associated with a top-of-rack switch or whatever its counterpart would be in a given network design, and that the physical and virtual machines located in that rack have addresses in that subnet. This is the same prefix that is used by the datacenter administrator.

3.2.1.2. Unique Local Addresses

A common requirement is that tenants have the use of some form of private address space. In an IPv6 network, a Unique Local IPv6 Unicast Address [RFC4193] may be used to accomplish this. In this case, however, the addresses will need to be explicitly assigned to physical or virtual machines used by the tenant, perhaps using DHCP or YANG, where a standard IPv6 address could be allocated using SLAAC, DHCPv6, or other technologies.

The value of this is that the distinction between a Global Address and a Unique Local Address is a corner case in the data center; a ULA will not generally be useful when communicating outside the data center, but within the data center it is rational. Tenants have no routing information or other awareness of the prefix. This is not intended for use behind a NAPT; resources that need accessibility to or from resources outside the tenant, and especially outside the data center, need global addresses.

3.2.1.3. Multicast Domains

Multicast capability is a capability enjoyed by some groups of resources, that enables them to send a single message and have it delivered to multiple destinations roughly simultaneously. At the link layer, this means sending a message once that is received by a specified set of recipient resources using hardware capabilities. IP multicast can be implemented on a LAN as specified in [RFC4291], and can also cross multiple subnets directly, using routing protocols such as Protocol Independent Multicast [RFC4601] [RFC4602] [RFC4604] [RFC4605] [RFC4607]. In IPv6, the model would be that when a group of resources is created with a multicast capability, it is allocated one or more source-specific transient group addresses as defined in section 2.7 of that RFC.

3.2.1.4. IPv4 Interaction Model

OpenStack IPv4 Neutron uses “floating IPv4 addresses” – global or public IPv4 addresses and Network Address Translation - to enable remote resources to connect to tenant private network endpoints. Tenant end points can connect out to remote resources through an “External Default Gateway”. Both of these depend on NAPT (DNAT/SNAT) [RFC2391] to ensure that IPv4 end points are able communicate and at the same time ensure tenant isolation.

If IPv6 is deployed in a data center, there are fundamentally two ways a tenant can interact with IPv4 peers:

• it can run existing IPv4 OpenStack technology in parallel with the IPv6 deployment, or
• It can have a translator at the data center edge (such as described in [I-D.ietf-v6ops-siit-dc]) that associates an IPv4 address or address plus port with an IPv6 address or address plus port. The IPv4 address, in this model, becomes a floating IPv4 address attached to an internal IPv6 address. The 'data center edge' is, by definition, a system that has IPv4 reachability to at least the data center's upstream ISP and all IPv4 systems in the data center, IPv6 connectivity to all of the IPv6 systems in the data center, and (if the upstream offers IPv6 service) IPv6 connectivity to the upstream as well.

The first model is complex, if for no other reason than that there are two fundamental models in use, one with various encapsulations hiding overlapping address space and one with non-overlapping address space.

To simplify the network, as noted in Section 2.1, we suggest that the data center be internally IPv6-only, and IPv4 be translated to IPv6 at the data center edge. The advantage is that it enables IPv4 access while that remains in use, and as IPv6 takes over, it reduces the impact of vestigial support for IPv4.

The SIIT Translation model in [I-D.ietf-v6ops-siit-dc] has IPv4 traffic come to an translator [RFC6145][RFC6146] having a pre-configured translation, resulting in an IPv6 packet indistinguishable from the packet the remote resource might have sent had it been IPv6-capable, with one exception. The IPv6 destination address is that of the endpoint (the same address advertised in a AAAA record), but the source address is an IPv4-Embedded IPv6 Address [RFC6052] with the IPv4 address of the sender embedded in a prefix used by the translator.

Access to external IPv4 resources is provided in the same way: an DNS64 [RFC6147] server is implemented that contains AAAA records with an IPv4-Embedded IPv6 Address [RFC6052] with the IPv4 address of the remote resource embedded in a prefix used by the translator.

This follows the Framework for IPv4/IPv6 Translation [RFC6144], making the internal IPv4 address a floating IP address attached to an internal IPv6 address, and the external 'dial-out' address indistinguishable from a native IPv6 address.

3.2.1.5. Legacy IPv4 OpenStack

The other possible model, applicable to IPv4-only devices, is to run a legacy OpenStack environment inside IPv6 tunnels. This preserves the data center IPv6-only, and enables IPv4-only applications, notably those whose licenses tie them to IPv4 addresses, to run. However, it adds significant overhead in terms of encapsulation size and network management complexity.

3.2.2. Use of Global Addresses by the Data Center

Every rack and physical host requires an IP prefix that is reachable by the OpenStack operator. This will normally be a global IPv6 unicast address. For scalability purposes, as isolation is handled separately, this is normally the same prefix as is used by tenants in the rack.

3.3. Inter-tenant security services

In this model, the a label is used to identify a set of virtual or physical systems under common ownership and administration that are authorized to communicate freely among themselves - a tenant. Tenants are not generally authorized to communicate with each other, but interactions between specified tenants may be authorized, and specific systems may be authorized to communicate generally.

The fundamental premise is that the vSwitch can determine whether a VM is authorized to send or receive a given message. It does so by finding the label in a message being sent or received and comparing it to a locally-held authorization policy. This policy would indicate that the VM is permitted to send or receive messages containing one of a small list of labels. In the case of a label contained in the IID of an IPv6 address, it would also need to verify the prefix used in the address, as this type of policy would be specific to an IPv6 prefix.

A set of possible choices that were considered is to be found in Appendix B. The key questions are a list of considerations, presented in no particular order:

• In what way does the approach the IPv6 Path MTU?
• How does the address come into being?
• What security implications apply? For example, how hard would it be for a VM to spoof the source address or attack a random destination?
• What is the service offered? Can, for example, policy be applied at
  • The sender of a datagram?
  • The receiver of a datagram?
  • An arbitrary point between the sender and receiver?
  • At the data center edge, on arriving or departing traffic other data centers?
  • At the data center edge, on arriving or departing traffic random locations?
• In what way does the approach the IPv6 Path MTU?

3.4. IPv6 Tenant Isolation using the Label

Neutron today already implements a form of Network Ingress Filtering [RFC2827]. It prevents the VM from emitting traffic with an unauthorized MAC, IPv4, or IPv6 source address.

In addition to this, in this model Neutron prevents the VM from transmitting a network packet with an unauthorized label value. The VM MAY be configured with and authorized to use one of a short list of authorized label values, as opposed to simply having its choice overridden; in that case, Neutron verifies the value and overwrites one not in the list.

When a hypervisor is about to deliver an IPv6 packet to a VM, it checks the label value against a list of values that the VM is permitted to receive. If it contains an unauthorized value, the hypervisor discards the packet rather than deliver it. If the Flow Label is in use, Neutron zeros the label prior to delivery.

The intention is to hide the label value from malware potentially found in the VM, and enable the label to be used as a form of first and last hop security. This provides basic tenant isolation, if the label is assigned as a tenant identifier, and may be used more creatively such as to identify a network management application as separate from a managed resource.

3.5. Isolation in Routing

This concept has the weakness that if a packet is not dropped at its source, it is dropped at its destination. It would be preferable for the packet to be dropped in flight, such as at the top-of-rack switch or an aggregation router.

Concepts discussed in IS-IS LSP Extendibility [I-D.baker-ipv6-isis-dst-flowlabel-routing][RFC5120][RFC5308] and OSPFv3 LSA Extendibility [I-D.baker-ipv6-ospf-dst-flowlabel-routing] [I-D.ietf-ospf-ospfv3-lsa-extend][RFC5340] may be used to isolate tenants in the routing of the data center backbone. This is not strictly necessary, if Section 3.4 is uniformly and correctly implemented. It does, however, present a second defense against misconfiguration, as the filter becomes ubiquitous in the data center and as scalable as routing.

4. BCP 38 Ingress Filtering

As noted in Section 3.4, Neutron today implements a form of Network Ingress Filtering [RFC2827]. It prevents the VM from emitting traffic with an unauthorized MAC, IPv4, or IPv6 source address.

In IPv6, this is readily handled when the address or addresses used by a VM are selected by the OpenStack operator. It may then configure a per-VM filter with the addresses it has chosen, following logic similar to the Source Address Validation Solution for DHCP [I-D.ietf-savi-dhcp] or SEND [RFC7219]. This is also true of IPv6 Stateless Address Autoconfiguration (SLAAC) [RFC4862] when the MAC address is known and not shared.

However, when SLAAC is in use and either the MAC address is unknown or SLAAC's Privacy Extensions [RFC4941][RFC7217], are in use, Neutron will need to implement the provisions of FCFS SAVI: First-Come, First-Served Source Address Validation [RFC6620] in order to learn the addresses that a VM is using and include them in the per-VM filter.

5. Moving virtual machines

This design supports these kinds of required layer 2 networks with the additional use of a layer 2 over layer 3 encapsulation and tunneling protocol, such as VXLAN [RFC7348]. The important point here being that these overlays are used to address specific tenant network requirements and NOT deployed to remove the scalability limitations of OpenStack networking.

There are at least three ways VM movement can be accomplished:

• Recreation of the VM
• VLAN Modification
• Live Migration of a Running Virtual Machine

5.1. Recreation of the VM

The simplest and most reliable is to

1. Create a new VM in the new location,
2. Add its address to the DNS Resource Record for the name, allowing new references to the name to send transactions there,
3. Remove the old address from the DNS Resource Record (including the SIIT translation, if one exists), ending the use of the old VM for new transactions,
4. Wait for the period of the DNS Resource Record's lifetime (including the SIIT translation, if one exists), as it will get new requests throughout that interval,
5. Wait for the for the old VM to finish any outstanding transactions, and then
6. Kill the old VM.

This is obviously not movement of an existing VM, but preservation of the same number and function of VMs by creation of a new VM and killing the old.

5.2. Live Migration of a Running Virtual Machine

At http://blogs.vmware.com/vsphere/2011/02/vmotion-whats-going-on-under-the-covers.html, VMWare describes its capability, called vMotion, in the following terms:

1. Shadow VM created on the destination host.
2. Copy each memory page from the source to the destination via the vMotion network. This is known as preCopy.
3. Perform another pass over the VM's memory, copying any pages that changed during the last preCopy iteration.
4. Continue this iterative memory copying until no changed pages (outstanding to be-copied pages) remain or 100 seconds elapse.
5. Stun the VM on the source and resume it on the destination.

In a native-address environment, we add three steps:

1. Shadow VM created on the destination host.
2. Copy each memory page from the source to the destination via the vMotion network. This is known as preCopy.
3. Perform another pass over the VM's memory, copying any pages that changed during the last preCopy iteration.
4. Continue this iterative memory copying until no changed pages (outstanding to be-copied pages) remain or 100 seconds elapse.
5. Stitch routing for the old address.
6. Stun the VM on the source and resume it on the destination.
7. Renumber the VM as instructed in [RFC4192].
8. Unstitch routing for the old address.

If the VM is moved within the same subnet (which usually implies the same rack), there is no stitching or renumbering apart from ensuring that the MAC address moves with the VM. When the VM moves to a different subnet, however, we need to restitch routing, at least temporarily. This obviously calls for some definitions.

Stitching Routing:

The VM is potentially in communication with two sets of peers: VMs in the same subnet, and VMs in different subnets.

• The router in the new subnet is instructed to advertise a host route (/128) to the moved VM, and to install a static route to the old address with the VM's address in the new subnet as its next hop address. Traffic from VMs from other subnets will now follow the host route to the VM in its new location.
• The router in the old subnet is instructed to direct LAN traffic to the VM's MAC Address to its IPv6 forwarding logic. Traffic from other VMs in the old subnet will now follow the host route to the moved VM.

Renumbering:

This step is optional, but is good hygiene if the VM will be there a while. If the VM will reside in its new location only temporarily, it can be skipped.

Note that every IPv6 address, unlike an IPv4 address, has a lifetime. At least in theory, when the lifetime expires, neighbor relationships with the address must be extended or the address removed from the system. The Neighbor Discovery [RFC4861] process in the subnet router will periodically emit a Router Advertisement; the VM will gain an IPv6 address in the new subnet at that time if not earlier. As described in [RFC4192], DNS should be changed to report the new address instead of the old. The DNS lifetime and any ambient sessions using the old address are now allowed to expire. That this point, any new sessions will be using the new address, and the old is vestigial.

Waiting for sessions using the address to expire can take an arbitrarily long interval, because the session generally has no knowledge of the lifetime of the IPv6 address.

Unstitching Routing:

This is the reverse process of stitching. If the VM is renumbered, when the old address becomes vestigial, the address will be discarded by the VM; if the VM is subsequently taken out of service, it has the same effect. At that point, the host route is withdrawn, and the MAC address in the old subnet router's tables is removed.

6. OpenStack implications

6.1. Configuration implications

1. Neutron MUST be configured with a pre-determined default label value for each tenant virtual network Section 3.4.
2. Neutron MAY be configured with a set of authorized label values for each tenant virtual network Section 3.4.
3. A virtual tenant network MAY be configured with a set of authorized label values Section 3.4.
4. Neutron MUST be configured with one or more label values per virtual tenant network that the network is permitted to receive Section 3.4.

6.2. vSwitch implications

On messages transmitted by a virtual machine

Label Correctness:

As described in Section 3.3, ensure that the label in the packet is one that the VM is authorized to use. Exactly what label is in view is a deferred, and potentially configurable, option. Again Depending on configuration, the vSwitch may overwrite whatever value is there, or may ratify that the value there is as specified in a VM-specific list.

Source Address Validation:

As described in Section 4, force the source address to be among those the VM is authorized to use. The VM may simultaneously be authorized to use several addresses.

Destination Address Validation:

OpenStack for IPv4 permits a NAT translation, called a 'floating IP address', to enable a VM to communicate outside the domain; without that, it cannot. For IPv6, the destination address should be permitted by some access list, which may permit all addresses, or addresses matching one or more CIDR prefixes such as permitted multicast addresses, and the prefix of the data center.

On messages received for delivery to a virtual machine

Label Authorization:

As described in Section 3.4, the vSwitch only delivers a packet to a VM if the VM is authorized to receive it. The VM may have been authorized to receive several such labels.

Each approach in the appendix discusses filtering.

7. IANA Considerations

This document does not ask IANA to do anything.

8. Security Considerations

In Section 2.5 and Section 3.3, this specification considers inter-tenant and intra-tenant network isolation. It is intended to contribute to the security of a network, much like encapsulation in a maze of tunnels or VLANs might, but without the complexities and overhead of the management of such resources. This does not replace the use of IPSec, SSH, or TLS encryption or the use authentication technologies; if these would be appropriate in an on-premises corporate data center, they remain appropriate in a multi-tenant data center regardless of the isolation technology. However, one can think of this as a simple inter-tenant firewall based on the concepts of role-based access control; if it can be readily determined that a sender is not authorized to communicate with a receiver, such a transmission is prevented.

9. Privacy Considerations

This specification places no personally identifying information in an unencrypted part of a packet.

10. Acknowledgements

This document grew out of a discussion among the authors and contributors.

11. Contributors

   Puneet Konghot
   Cisco Systems
   San Jose, California  95134
   USA
   Email: pkonghot@cisco.com

   Shannon McFarland
   Cisco Systems
   Boulder, Colorado  80301
   USA
   Email: shmcfarl@cisco.com
	

                   _.----------------------.
           _.----''                         `------.
      ,--''                                         `---.
   ,-' DataCenter      .---------------------.           `-.
 ,'    Company #2,---''      Unauthorized     `----.        `.
;              ,' ,-----+-----.        ,--+--------.`.        :
|             (  ( Department 1)--//--( Department 2) )       |
;              `. `-----+----+'        `-----------','        |
 `.              `----. |     X Company A     _.---'        ,'
   '-.                 A|------X------------''           ,-'
      `---.            u|       X                   _.--'
           `------.    t|        X          _.----''
                   `---h|---------X-------''
                       o|          X
                   _.--r+-----------X------.
           _.----''    i|            X      `------.
      ,--''            z|             X             `---.
   ,-' DataCenter      e|--------------X-----.           `-.
 ,'    Company #2,---''d|               X     `----.        `.
;              ,' ,-----+-----.        ,-+---------.`.        :
|             (  ( Department 1)      ( Department 2) )       |
;              `. `-----------'        `-----------','        |
 `.              `----.     Company A         _.---'        ,'
   '-.                 `--------------------''           ,-'
      `---.                                         _.--'
           `------.                         _.----''
                   `----------------------''

8 = 8*128^0
+-+------+
|1|    8 |
+-+------+

987 = 7*128^1 + 91*128^0
+-+------+-+------+
|0|    7 |1|   91 |
+-+------+-+------+

121393 = 7*128^2 + 52*128^1 + 49*128^0
+-+------+-+------+-+------+
|0|    7 |0|   52 |1|   49 |
+-+------+-+------+-+------+

+-------+-------+-+-----+-+-----+-+-----+-+-----+-+-----+-+-----+
| type  | len=6 |1|   8 |0|   7 |1|  91 |0|   7 |0|  52 |1|  49 |
+-------+-------+-+-----+-+-----+-+-----+-+-----+-+-----+-+-----+

0       8       16      24      32      40      48      56      64
+-------+-------+-------+-------+-------+-------+-------+-------+
| FLAG  |  SIZE |    CLOUD-ID                   |  FLAG | SIZE  |
+-------+-------+-------+-------+-------+-------+-------+-------+
|                    SERVICE-ID                 |  FLAG | SIZE  |
+-------+-------+-------+-------+-------+-------+-------+-------+
|                    TENANT-ID                  |
+-------+-------+-------+-------+-------+-------+
         

 0       8       16      24      32      40
+-------+-------+-------+-------+-------+-------+
|Organizationally Unique|  NIC Specific Number  |
| Identifier (OUI)      |                       |
+-------+-------+-------+-------+-------+-------+
      AA
      |+--- 0=Unicast/1=Multicast
      +---- 1=Local/0=Global
 

 0       8       16      24      32      40      48      56
+-------+-------+-------+-------+-------+-------+-------+-------+
|Organizationally Unique| Fixed Value   |  NIC Specific Number  |
| Identifier (OUI)      |               |                       |
+-------+-------+-------+-------+-------+-------+-------+-------+
      AA
      |+--- Reserved
      +---- 0=Local/1=Global
 

 0       8       16      24      32      40    47
+-------+-------+-------+-------+-------+-------+
|System Number within   | Openstack Tenant      |
|    LAN                | Identifier            |
+-------+-------+-------+-------+-------+-------+
      AA
      |+--- 0=Unicast/1=Multicast
      +---- 1=Local/0=Global
 

 0       8       16      24      32      40      48      56    63
+-------+-------+-------+-------+-------+-------+-------+-------+
|system number within   | Fixed Value   |  24 bit OpenStack     |
| LAN                   |               |  Tenant Identifier    |
+-------+-------+-------+-------+-------+-------+-------+-------+
      AA
      |+--- Reserved
      +---- 0=Local/1=Global
 

 0       8       16      24      32      40      48      56    63
+-------+-------+-------+-------+-------+-------+-------+-------+
|        system number within LAN       |  24 bit OpenStack     |
|                                       |  Tenant Identifier    |
+-------+-------+-------+-------+-------+-------+-------+-------+
      AA
      |+--- Reserved
      +---- 0=Local/1=Global
 

|   8    |  4 |  4 |           88 bits               24 bits     |
+------ -+----+----+-----------------------------+---------------+
|11111111|flgs|scop|        Tenant Group ID      |  Tenant ID    |
+--------+----+----+-----------------------------+---------------+