| Network File System Version 4 | C. Lever, Ed. |
| Internet-Draft | Oracle |
| Intended status: Standards Track | D. Noveck |
| Expires: October 10, 2016 | HPE |
| April 8, 2016 |
RPC-over-RDMA Version Two
draft-cel-nfsv4-rpcrdma-version-two-00
This document specifies an improved protocol for conveying Remote Procedure Call (RPC) messages on physical transports capable of Remote Direct Memory Access (RDMA), based on RPC-over-RDMA Version One.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on October 10, 2016.
Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Remote Direct Memory Access (RDMA) [RFC5040] [RFC5041] [IB] is a technique for moving data efficiently between end nodes. By directing data into destination buffers as it is sent on a network, and placing it via direct memory access by hardware, the benefits of faster transfers and reduced host overhead are obtained.
A protocol already exists that enables RPC [RFC5531] messages to be conveyed on RDMA transports. That protocol is RPC-over-RDMA Version One, specified in [I-D.ietf-nfsv4-rfc5666bis]. RPC-over-RDMA Version One is deployed and in use, though there are some shortcomings to this protocol, such as:
To address these issues in a way that is compatible with existing RPC-over-RDMA Version One deployments, a new version of RPC-over-RDMA is presented in this document. RPC-over-RDMA Version Two contains only incremental changes over RPC-over-RDMA Version One to facilitate adoption of Version Two by existing Version One implementations.
The major new feature in RPC-over-RDMA Version Two is extensibility of the RPC-over-RDMA header. Extensibility enables narrow changes to RPC-over-RDMA Version Two so that new optional capabilities can be introduced without a protocol version change and while maintaining interoperability with existing implementations. New capabilities can be proposed and developed independently of each other, and implementaters can choose among them. It should be straightforward to create and document experimental features and then bring them through the standards process.
In addition to extensibility, the default inline threshold value is larger in RPC-over-RDMA Version Two. This change is driven by the increase in average size of RPC messages containing common NFS operations. With NFSv4.1 [RFC5661] and later, compound operations convey more data per RPC message. The default 1KB inline threshold in RPC-over-RDMA Version One prevents attaining the best possible performance.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
The term "inline threshold" is defined in Section 4 of [I-D.ietf-nfsv4-rfc5666bis]. A receiver's "inline threshold" value is the largest message size (in octets) that the receiver can accept via an RDMA Receive operation. Each connection has two inline threshold values, one for each peer receiver. Inline threshold values are not advertised to peers via the base RPC-over-RDMA Version Two protocol.
A connection's inline threshold determines when full RDMA Read or Write operations are required because the RPC message to be send is larger than the peer's Receive buffer. If an RPC message does not contain DDP-eligible data items, a requester prepares a Long Call or Reply to convey the whole RPC message using an RDMA Read or Write.
RDMA Read and Write operations require that each data payload resides in a region of memory that is registered with the RNIC. When an RPC is complete, that region is unregistered, fencing it from the responder.
Both registration and unregistration have a latency cost which is insignificant compared to data handling costs. When a data payload is small, however, the cost of registering and unregistering the memory where it resides becomes a relatively significant part of total RPC latency. Therefore the most efficient operation of RPC-over-RDMA occurs when RDMA Read and Write operations are used for large payloads, and avoided for small payloads.
When RPC-over-RDMA Version One was conceived, the typical size of RPC messages that did not involve a significant data payload was under 500 bytes. A 1024-byte inline threshold adequately minimized the frequency of inefficient Long Calls and Replies.
Starting with NFSv4.1 [RFC5661], NFS COMPOUND RPC messages are larger and more complex than before. With a 1024-byte inline threshold, RDMA Read or Write operations are needed for frequent operations that do not bear a data payload, such as GETATTR and LOOKUP, reducing the efficiency of the transport. To reduce the need to use Long Calls and Replies, RPC-over-RDMA Version Two quadruples the default inline threshold size. This also increases the maximum size of backward direction RPC messages.
RPC-over-RDMA Version Two receiver implementations MUST support an inline threshold of 4096 bytes, but MAY support larger inline threshold values. A mechanism for discovering a peer's preferred inline threshold value may be used to optimize RDMA Send operations further. In the absense of such a mechanism, senders MUST assume a receiver's inline threshold is 4096 bytes.
The new default inline threshold size is no larger than the size of a hardware page on typical platforms. This conserves the resources needed to Send and Receive base level RPC-over-RDMA Version Two messages, enabling RPC-over-RDMA Version Two to be used on a broad base of hardware.
The core RPC-over-RDMA Version Two header format is specified in Section 4 as a complete and stand-alone piece of XDR. Any change to this XDR description requires a protocol version number change.
RPC-over-RDMA Version Two introduces the ability to extend the core protocol via optional features. Extensibility enables minor protocol issues to be addressed and incremental enhancements to be made without the need to change the protocol version. The key capability is that both sides can detect whether a feature is supported by their peer or not. With this ability, OPTIONAL features can be introduced over time to an otherwise stable protocol.
The rdma_opttype field carries a 32-bit unsigned integer. The value in this field denotes an optional operation that MAY be supported by the receiver. The values of this field and their meaning are defined in other Standards Track documents.
The rdma_optinfo field carries opaque data. The content of this field is data meaningful to the optional operation denoted by the value in rdma_opttype. The content of this field is not defined in the base RPC-over-RDMA Version Two protocol, but is defined in other Standards Track documents
When an implementation does not recognize or support the value contained in the rdma_opttype field, it MUST send an RPC-over-RDMA message with the rdma_xid field set to the same value as the erroneous message, the rdma_proc field set to RDMA_ERROR, and the rdma_err field set to RDMA_ERR_INVAL_OPTION.
RPC-over-RDMA Version Two may be extended by defining a new rdma_opttype value and XDR description of the corresponding rdma_optinfo content.
A set of such new protocol elements may be introduced by a Standards Track document and are together considered an OPTIONAL feature. nfsv4 Working Group and IESG review, together with appropriate testing of prototype implementations, should ensure continued interoperation with existing implementations.
Documents describing extensions to RPC-over-RDMA Version Two should contain:
Implementers concatenate the XDR description of the new feature with the XDR description of the base protocol, extracted from this document, to produce a combined XDR description for the RPC-over-RDMA Version Two protocol with the specified extension.
This section contains a description of the core features of the RPC-over-RDMA Version Two protocol, expressed in the XDR language [RFC4506].
This description is provided in a way that makes it simple to extract into ready-to-compile form. The reader can apply the following shell script to this document to produce a machine-readable XDR description of the RPC-over-RDMA Version One protocol without any OPTIONAL extensions.
<CODE BEGINS> #!/bin/sh grep '^ *///' | sed 's?^ /// ??' | sed 's?^ *///$??' <CODE ENDS>
That is, if the above script is stored in a file called "extract.sh" and this document is in a file called "spec.txt" then the reader can do the following to extract an XDR description file:
<CODE BEGINS> sh extract.sh < spec.txt > rpcrdma_corev2.x <CODE ENDS>
Optional extensions to RPC-over-RDMA Version Two, published as Standards Track documents, will have similar means of providing XDR that describes those extensions. Once XDR for all desired extensions is also extracted, it can be appended to the XDR description file extracted from this document to produce a consolidated XDR description file reflecting all extensions selected for an RPC-over-RDMA implementation.
<CODE BEGINS> /// /* /// * Copyright (c) 2010, 2016 IETF Trust and the persons /// * identified as authors of the code. All rights reserved. /// * /// * The authors of the code are: /// * B. Callaghan, T. Talpey, C. Lever, and D. Noveck. /// * /// * Redistribution and use in source and binary forms, with /// * or without modification, are permitted provided that the /// * following conditions are met: /// * /// * - Redistributions of source code must retain the above /// * copyright notice, this list of conditions and the /// * following disclaimer. /// * /// * - Redistributions in binary form must reproduce the above /// * copyright notice, this list of conditions and the /// * following disclaimer in the documentation and/or other /// * materials provided with the distribution. /// * /// * - Neither the name of Internet Society, IETF or IETF /// * Trust, nor the names of specific contributors, may be /// * used to endorse or promote products derived from this /// * software without specific prior written permission. /// * /// * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS /// * AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED /// * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE /// * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS /// * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO /// * EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE /// * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, /// * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT /// * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR /// * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS /// * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF /// * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, /// * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING /// * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF /// * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. /// */ <CODE ENDS>
Code components extracted from this document must include the following license text. When the extracted XDR code is combined with other complementary XDR code which itself has an identical license, only a single copy of the license text need be preserved.
<CODE BEGINS>
/// struct rpcrdma2_segment {
/// uint32 rdma_handle;
/// uint32 rdma_length;
/// uint64 rdma_offset;
/// };
///
/// struct rpcrdma2_read_segment {
/// uint32 rdma_position;
/// struct rpcrdma2_segment rdma_target;
/// };
///
/// struct rpcrdma2_read_list {
/// struct rpcrdma2_read_segment rdma_entry;
/// struct rpcrdma2_read_list *rdma_next;
/// };
///
/// struct rpcrdma2_write_chunk {
/// struct rpcrdma2_segment rdma_target<>;
/// };
///
/// struct rpcrdma2_write_list {
/// struct rpcrdma2_write_chunk rdma_entry;
/// struct rpcrdma2_write_list *rdma_next;
/// };
///
/// struct rpcrdma2_chunk_lists {
/// struct rpcrdma2_read_list *rdma_reads;
/// struct rpcrdma2_write_list *rdma_writes;
/// struct rpcrdma2_write_chunk *rdma_reply;
/// };
///
/// enum rpcrdma2_errcode {
/// RDMA_ERR_VERS = 1,
/// RDMA_ERR_BAD_HEADER = 2,
/// RDMA_ERR_INVAL_OPTION = 3
/// };
///
/// struct rpcrdma2_err_vers {
/// uint32 rdma_vers_low;
/// uint32 rdma_vers_high;
/// };
///
/// union rpcrdma2_error switch (rpcrdma2_errcode rdma_err) {
/// case RDMA_ERR_VERS:
/// rpcrdma2_err_vers rdma_vrange;
/// case RDMA_ERR_BAD_HEADER:
/// void;
/// case RDMA_ERR_INVAL_OPTION:
/// void;
/// };
///
/// struct rpcrdma2_optional {
/// uint32 rdma_opttype;
/// opaque rdma_optinfo<>;
/// };
///
/// enum rpcrdma2_proc {
/// RDMA_MSG = 0,
/// RDMA_NOMSG = 1,
/// RDMA_MSGP = 2, /* Reserved */
/// RDMA_DONE = 3, /* Reserved */
/// RDMA_ERROR = 4,
/// RDMA_OPTIONAL = 5
/// };
///
/// union rpcrdma2_body switch (rpcrdma2_proc rdma_proc) {
/// case RDMA_MSG:
/// rpcrdma2_chunks rdma_chunks;
/// case RDMA_NOMSG:
/// rpcrdma2_chunks rdma_chunks;
/// case RDMA_MSGP:
/// void;
/// case RDMA_DONE:
/// void;
/// case RDMA_ERROR:
/// rpcrdma2_error rdma_error;
/// case RDMA_OPTIONAL:
/// rpcrdma2_optional rdma_optional;
/// };
///
/// struct rpcrdma2_xprt_hdr {
/// uint32 rdma_xid;
/// uint32 rdma_vers;
/// uint32 rdma_credit;
/// rpcrdma2_body rdma_body;
/// };
<CODE ENDS>
The XDR defined in this section is used to encode the Transport Header Stream in each RPC-over-RDMA Version Two message. The terms "Transport Header Stream" and "RPC Payload Stream" are defined in Section 4 of [I-D.ietf-nfsv4-rfc5666bis].
When the rdma_proc field has the value RDMA_MSG, an RPC Payload Stream MUST follow the Transport Header Stream in the Send buffer. When the rdma_proc field has the value RDMA_OPTIONAL, an RPC Payload Stream MAY follow the Transport header Stream in the Send buffer. When the rdma_proc field has any other value, an RPC Payload Stream MUST NOT follow the Transport Header Stream.
Implementations of RPC-over-RDMA Version Two are REQUIRED to support backwards direction operation as described in [I-D.ietf-nfsv4-rpcrdma-bidirection].
Error handling works the same way in RPC-over-RDMA Version Two as it does in RPC-over-RDMA Version One, with one change described in Section 3.1. Version One error handling is described in Section 5 of [I-D.ietf-nfsv4-rfc5666bis].
When an RPC-over-RDMA Version Two requester establishes a connection to a responder, the first order of business is to determine the responder's highest supported protocol version.
As with RPC-over-RDMA Version One, a requester MUST assume the ability to exchange only a single RPC-over-RDMA message at a time until it receives a non-error RPC-over-RDMA message from the responder that reports the responder's actual credit limit.
First, the requester sends a single valid RPC-over-RDMA message with the value two (2) in the rdma_vers field. Because the responder might support only RPC-over-RDMA Version One, this initial message can be no larger than the Version One default inline threshold of 1024 bytes.
If the responder does support RPC-over-RDMA Version Two, it sends an RPC-over-RDMA message back to the requester with the same XID containing a valid non-error response. Subsequently, both peers use the default inline threshold value for RPC-over-RDMA Version Two connections (4096 bytes).
If the responder does not support RPC-over-RDMA Version Two, [I-D.ietf-nfsv4-rfc5666bis] REQUIRES that it send an RPC-over-RDMA message to the requester with the same XID, with RDMA_ERROR in the rdma_proc field, and with the error code RDMA_ERR_VERS. This message also reports a range of protocol versions that the responder supports. To continue operation, the requester selects a protocol version in the range of responder-supported versions for subsequent messages on this connection.
If the connection is lost immediately after the RDMA_ERROR reply is received, a requester can avoid a possible version negotiation loop when re-establishing another connection by assuming that particular responder does not support RPC-over-RDMA Version Two. A requester can assume the same situation (no responder support for RPC-over-RDMA Version Two) if the initial negotiation message is lost or dropped.
Once the negotiation exchange is complete, both peers use the default inline threshold value for the protocol version that will be used for the remainder of the connection lifetime. To permit inline threshold values to change during negotiation of protocol version, RPC-over-RDMA Version Two implementations MUST allow inline threshold values to change without triggering a connection loss.
[I-D.ietf-nfsv4-rfc5666bis] REQUIRES that a responder MUST send Replies with the same RPC-over-RDMA protocol version that the requester uses to send its Calls.
The security considerations for RPC-over-RDMA Version Two are the same as those for RPC-over-RDMA Version One.
There are no IANA considerations at this time.
The authors gratefully acknowledge the work of Brent Callaghan and Tom Talpey on the original RPC-over-RDMA Version One specification [RFC5666]. The authors also wish to thank Bill Baker, Greg Marsden, and Matt Benjamin for their support of this work.
The extract.sh shell script and formatting conventions were first described by the authors of the NFSv4.1 XDR specification [RFC5662].
Special thanks go to nfsv4 Working Group Chair Spencer Shepler and nfsv4 Working Group Secretary Thomas Haynes for their support.
| [RFC2119] | Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997. |
| [RFC4506] | Eisler, M., "XDR: External Data Representation Standard", STD 67, RFC 4506, DOI 10.17487/RFC4506, May 2006. |
| [RFC5531] | Thurlow, R., "RPC: Remote Procedure Call Protocol Specification Version 2", RFC 5531, DOI 10.17487/RFC5531, May 2009. |