| Internet-Draft | LIMITS Extension | July 2021 |
| Freed | Expires 13 January 2022 | [Page] |
This document defines a "Limits" extension for the Simple Mail Transfer Protocol (SMTP), including submisssion, as well as the Local Mail Transfer Protocol (LMTP). It also defines an associated limit registry. This extension provides the means for an SMTP, submission, or LMTP server to inform the client of limits the server intends to apply to the protocol during the current session. The client is then able to adapt its behavior in order to conform to those limits.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 13 January 2022.¶
Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶
The Simple Mail Transfer Protocol provides the ability to transfer [SMTP] or submit [SUBMIT] multiple email messages from one host to another, each with multiple recipients, using a single or multiple connections.¶
The Local Mail Transfer Protocol [LMTP] provides the ability to deliver messages to a system without its own mail queues. Like SMTP, it allows multiple messages with multiple recipients.¶
In order to conserve resources as well as protect themselves from malicious clients, it is necessary for servers to enforce limits on various aspects of the protocol, e.g., a limit on the number of recipients that can be specified in a single transaction.¶
Additionally, servers may also wish to alter the limits they apply depending on their assessment of the reputation of a particular client.¶
The variability of the limits that may be in effect creates a situation where clients may inadvertently exceed a particular server's limits, causing servers to respond with temporary (or in some cases, permanent) errors. This in turn can lead to delays or even failures in message transfer.¶
The "Limits" extension provides the means for a server to inform a client about specific limits in effect for a particular SMTP or LMTP session in the EHLO or LHLO command response. This information, combined with the inherent flexibility of these protocols, makes it possible for clients to avoid server errors and the problems they cause.¶
SMTP and LMTP servers have always been able to announce a limit using distinguished syntax in a reply, but this approach requires that the client first needs to issue a command. The mechanism specified here avoids the overhead of that approach by announcing limits prior to any substantive interaction.¶
Limits are registered with the IANA. Each registration includes the limit name, value syntax, and a description of its semantics.¶
In this document, the key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" are to be interpreted as described in BCP 14, RFC 2119 [KEYWORDS].¶
This specification uses the Augmented Backus-Naur Form [ABNF] notation and its core rules to define the formal syntax of the "Limits" extension.¶
This specification makes extensive use of the terminology specified and used in [SMTP].¶
Extensions to SMTP are defined in Section 2.2 of [SMTP]. [LMTP] inherits SMTP's extension mechanism.¶
The name of the extension is "Limits". Servers implementing this extension advertise an additional "LIMITS" EHLO (LHLO in LMTP) keyword. The associated parameter is used by the server to communicate one or more limits, each with an optional value, to the client. The syntax of the parameter is:¶
limits-param = limit-name-value 0*[SP limit-name-value] limit-name-value = limit-name ["=" limit-value] limit-name = 1*(ALPHA / DIGIT / "-" / "_") limit-value = 1*(%x21-3A / %x3C-7E) ; Any VCHAR except ";"¶
This extension introduces no new SMTP commands, and does not alter any existing command. However, it is possible for a LIMITS parameter to be associated with another SMTP extension that does these things.¶
In order to achieve consistent behavior, all limits MUST be registered with the IANA, as described below.¶
Limit names MUST be comprehensible, but also should be kept as short as possible. The use of commonly understood abbreviations, e.g., "MAX" for "maximum", is encouraged.¶
When a limit is associated with a particular command, its name SHOULD begin with the name of that command.¶
Limit names SHOULD end with one or more terms that describe the type of limit.¶
The "Pipelining" extension [PIPELINING] is commonly used to improve performance, especially over high latency connections. Pipelining allows entire transaction to be sent without checking responses and in some cases it may be possible to send multiple transactions.¶
The use of pipelining affects limits in an important way: Since a pipelining client cannot check intermediate command responses without stalling the pipeline, it cannot count the number of succesful versus failed responses and adjust its behavior accordingly. Limit designers need to take this into account.¶
For example, it may seem like it would be better to impose a limit on the number of succesful RCPT TO commands as opposed to the way the RCPTMAX limit is specified in Section 4.2 below. But counting the total number of RCPT TOs is simple, whereas counting the number of successful RCPT TO stalls the pipeline.¶
This extension provides an announcement as part of the reply to an EHLO command. Some servers vary their limits, as a session progresses, based on their obtaining more information. This extension does not attempt to handle in-session limit changes.¶
Section 4.5.3.1 of [SMTP] specifies minimum values for various server sizes, limits, and timeouts, e.g., servers must accept a minimum of 100 RCPT TO commands (section 4.5.3.1.8). Unfortunately, the reality is that servers routinely impose smaller limits than what SMTP requires, and when this is done it's especially important for clients to be aware that this is happening.¶
For this reason there is no requirement that the limits advertised by this extension comply with the minimums imposed by SMTP.¶
These protocols require that the EHLO command (LHLO in LMTP) be reissued under certain circumstances, e.g., after successful authentication [AUTH] or negotiation of a security layer [STARTTLS].¶
Servers MAY return updated limits any time the protocol requires clients to reissue the EHLO command. Clients MUST discard any previous limits in favor of those provided by the most recent EHLO. This includes the case where the original EHLO provided a set of limits but the subsequent EHLO did not; in this case the client MUST act as if no limits were communicated.¶
Syntax errors in the basic parameter syntax are best handled by ignoring the value in its entirety; in this case clients SHOULD proceed as if the LIMITS extension wasn't used.¶
Syntax errors in the value syntax of a specific limit are best handled by ignoring that limit; in this case the client SHOULD proceed as if that limit wasn't specified.¶
It is possible that future specification may create multiple limits that are interrelated in some way; in this case that specification MUST specify how an error in one limit's value syntax affects the other limits.¶
Clients MAY cache limits determined during one session and use them to optimize their behavior for subsequent sessions. However, since servers are free to adjust their limits at any time, clients MUST be able to accommodate any limit changes that occur between sessions.¶
An initial set of limits are specified in the following sections.¶
Name: MAILMAX¶
Value syntax: %x31-39 0*5DIGIT ; 0 not allowed, 6 digit maximum¶
Description: MAILMAX specifies the maximum number of transactions (MAIL FROM commands) the server will accept in a single session. The count includes all MAIL FROM commands, regardless of whether they succeed or fail.¶
Restrictions: None.¶
Name: RCPTMAX¶
Value syntax: %x31-39 0*5DIGIT ; 0 not allowed, 6 digit maximum¶
Description: RCPTMAX specifies the maximum number of RCPT TO commands the server will accept in a single transaction. It is not a limit on the actual number of recipients the message ends up being sent to; a single RCPT TO command may produce multiple recipients or, in the event of an error, none.¶
Restrictions: None.¶
Name: RCPTDOMAINMAX¶
Value syntax: %x31-39 0*5DIGIT ; 0 not allowed, 6 digit maximum¶
Description: RCPTDOMAINMAX specifies the maximum number of different domains that can appear in a recipient (RCPT TO) address within a single session. This limit is imposed by some servers that bind to a specific internal delivery mechanism on receipt of the first RCPT TO command.¶
Restrictions: None.¶
A server announces two limits it implements to the client, along with various other supported extensions, as follows:¶
S: [wait for open connection] C: [open connection to server] S: 220 mail.example.com ESMTP service ready C: EHLO example.org S: 250-mail.example.com S: 250-SMTPUTF8 S: 250-LIMTIS RCPTMAX=20 MAILMAX=5 S: 250-SIZE 100000000 S: 250-8BITMIME S: 250-ENHANCEDSTATUSCODES S: 250-PIPELINING S: 250-CHUNKING S: 250 STARTTLS¶
The client now knows to limit the number of recipients in a transaction to twenty and the number of transaction in a session to five.¶
A malicious server can use limits to overly constrain client behavior, causing excessive use of client resources.¶
A malicious client may use the limits a server advertises to optimize the delivery of unwanted messages.¶
A man-in-the-middle attack on unprotected SMTP connections can be used to cause clients to misbehave, which in turn could result in delivery delays or failures. Loss of reputation for the client could also occur.¶
All that said, decades of operational experience with the SMTP "SIZE" extension [SIZE], which provides servers with the ability to indicate message size, indicates that such abuse is rare and unlikely to be a significant problem.¶
Use of the Limits extension to provide client-specific information - as opposed to general server limits - unavoidably provides senders with feedback about their reputation. Malicious senders can exploit this in various ways, e.g., start by sending good email and then, once their reputation is established, sending bad email.¶
The IANA is requested to add "LIMITS" to the SMTP Service Extension Registry:¶
Keywords: LIMITS Description: Server limits Reference: [RFCxxxx]¶
The IANA is requested to create a new registry for SMTP server limits. The policy for this registry is "Specification Required". Registry entries consist of three required values:¶
The IANA is also requested to register the limits specified in this document.¶
A lot of people have helped make this specification possible. The author wishes to thank Claus Assmann, Laura Atkins, Alex Brotman, Richard Clayton, Dave Crocker, Viktor Dukhovni, Arnt Gulbrandsen, Jeremy Harris, Todd Herr, Mike Hillyer, Matthias Leisi, John Klensin, Valdis Klētnieks, John Levine, Alexey Melnikov, Keith Moore, Michael Peddemors, Hector Santos, George Schlossnagle, Rolf E. Sonneveld, and Alessandro Vesely for their contributions and reviews.¶