| Internet-Draft | VALARM Extensions | November 2020 |
| Daboo & Murchison | Expires 29 May 2021 | [Page] |
This document defines a set of extensions to the iCalendar VALARM component to enhance use of alarms and improve interoperability between clients and servers.¶
This document updates RFC5545.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 29 May 2021.¶
Copyright (c) 2020 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶
The iCalendar [RFC5545] specification defines a set of components used to describe calendar data. One of those is the "VALARM" component which appears as a sub-component of "VEVENT" and "VTODO" components. The "VALARM" component is used to specify a reminder for an event or task. Different alarm actions are possible, as are different ways to specify how the alarm is triggered.¶
As iCalendar has become more widely used and as client-server protocols such as CalDAV [RFC4791] have become more prevalent, several issues with "VALARM" components have arisen. Most of these relate to the need to extend the existing "VALARM" component with new properties and behaviors to allow clients and servers to accomplish specific tasks in an interoperable manner. For example, clients typically need a way to specify that an alarm has been dismissed by a calendar user, or has been "snoozed" by a set amount of time. To date, this has been done through the use of custom "X-" properties specific to each client implementation, leading to poor interoperability.¶
This specification defines a set of extensions to "VALARM" components to cover common requirements for alarms not currently addressed in iCalendar. Each extension is defined in a separate section below. For the most part, each extension can be supported independently of the others, though in some cases one extension will require another. In addition, this specification describes mechanisms by which clients can interoperably implement common features such as "snoozing".¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
When XML element types in the namespaces "DAV:" and "urn:ietf:params:xml:ns:caldav" are referenced in this document outside of the context of an XML fragment, the string "DAV:" and "CALDAV:" will be prefixed to the element type names respectively.¶
Section 3.6.6 of [RFC5545] defines the syntax for "VALARM" components and properties within them. However, as written, it is hard to extend this by adding, e.g., a new property common to all types of alarm. Since many of the extensions defined in this document need to extend the base syntax, an alternative form for the base syntax is defined here, with the goal of simplifying specification of the extensions.¶
A "VALARM" calendar component is re-defined by the following notation:¶
alarmcext = "BEGIN" ":" "VALARM" CRLF
alarmprop
"END" ":" "VALARM" CRLF
alarmprop = *(
; the following are REQUIRED,
; but MUST NOT occur more than once
action / trigger /
; one set of action properties MUST be
; present and MUST match the action specified
; in the ACTION property
actionprops /
; the following is OPTIONAL,
; and MAY occur more than once
x-prop / iana-prop
)
actionprops = audiopropext / disppropext / emailpropext
audiopropext = *(
; 'duration' and 'repeat' are both OPTIONAL,
; and MUST NOT occur more than once each,
; but if one occurs, so MUST the other
duration / repeat /
; the following is OPTIONAL,
; but MUST NOT occur more than once
attach
)
disppropext = *(
; the following are REQUIRED,
; but MUST NOT occur more than once
description /
; 'duration' and 'repeat' are both OPTIONAL,
; and MUST NOT occur more than once each,
; but if one occurs, so MUST the other
duration / repeat
)
emailpropext = *(
; the following are all REQUIRED,
; but MUST NOT occur more than once
description / summary /
; the following is REQUIRED,
; and MAY occur more than once
attendee /
; 'duration' and 'repeat' are both OPTIONAL,
; and MUST NOT occur more than once each,
; but if one occurs, so MUST the other
duration / repeat
; the following is OPTIONAL,
; and MAY occur more than once
attach
)¶
This extension adds a "UID" property to "VALARM" components to allow a unique identifier to be specified. The value of this property can then be used to refer uniquely to the "VALARM" component.¶
The "UID" property defined here follows the definition in Section 3.8.4.7 of [RFC5545] with the security and privacy updates in Section 5.3 of [RFC7986]. In particular it MUST be a globally unique identifier that does not contain any security- or privacy-sensitive information.¶
The "VALARM" component defined in Section 3 is extended here as:¶
alarmprop /= *(
; the following is OPTIONAL,
; but MUST NOT occur more than once
uid
)
¶
It is often convenient to relate one or more "VALARM" components to other "VALARM" components (e.g., see Section 7). This can be accomplished if the "VALARM" components each have their own "UID" property (as per Section 4).¶
This specification updates the usage of the "RELATED-TO" property defined in Section 3.8.4.5 of [RFC5545] to enable its use with "VALARM" components. Specific types of relationships between "VALARM" components can be identified by registering new values for the "RELTYPE" property parameter defined in Section 3.2.15 of [RFC5545].¶
The "VALARM" component defined in Section 3 is extended here as:¶
alarmprop /= *(
; the following is OPTIONAL,
; but MAY occur more than once
related
)
¶
There is currently no way for a "VALARM" component to indicate whether it has been triggered and acknowledged. With the advent of a standard client/server protocol for calendaring and scheduling data ([RFC4791]) it is quite possible for an event with an alarm to exist on multiple clients in addition to the server. If each of those is responsible for performing the action when an alarm triggers, then multiple "alerts" are generated by different devices. In such a situation, a calendar user would like to be able to "dismiss" the alarm on one device and have it automatically dismissed on the others too.¶
Also, with recurring events that have alarms, it is important to know when the last alarm in the recurring set was acknowledged, so that the client can determine whether past alarms have been missed.¶
To address these needs, this specification adds an "ACKNOWLEDGED" property to "VALARM" components to indicate when the alarm was last sent or acknowledged. This is defined by the syntax below.¶
alarmprop /= *(
; the following is OPTIONAL,
; but MUST NOT occur more than once
acknowledged
)
¶
Clients SHOULD set this property to the current date-time value in UTC when a calendar user acknowledges a pending alarm. Certain kinds of alarm may not provide feedback as to when the calendar user sees them, for example email based alerts. For those kinds of alarms, the client SHOULD set this property when the alarm is triggered and the action successfully carried out.¶
When an alarm is triggered on a client, clients can check to see if an "ACKNOWLEDGED" property is present. If it is, and the value of that property is greater than or equal to the computed trigger time for the alarm, then the client SHOULD NOT trigger the alarm. Similarly, if an alarm has been triggered and an "alert" presented to a calendar user, clients can monitor the iCalendar data to determine whether an "ACKNOWLEDGED" property is added or changed in the alarm component. If the value of any "ACKNOWLEDGED" property in the alarm changes and is greater than or equal to the trigger time of the alarm, then clients SHOULD dismiss or cancel any "alert" presented to the calendar user.¶
This property is defined by the following notation:¶
acknowledged = "ACKNOWLEDGED" acknowledgedparam ":" datetime CRLF
acknowledgedparam = *(
; the following is OPTIONAL,
; and MAY occur more than once
(";" other-param)
)
¶
The following is an example of this property:¶
ACKNOWLEDGED:20090604T084500Z¶
Users often want to "snooze" an alarm, and this specification defines a standard approach to accomplish that.¶
To "snooze" an alarm, clients create a new "VALARM" component within the parent component of the "VALARM" that was triggered and is being "snoozed" (i.e., as a "sibling" component of the "VALARM" being snoozed). The new "VALARM" MUST be set to trigger at the user's chosen "snooze" interval after the original alarm triggered. Clients SHOULD use an absolute "TRIGGER" property with a "DATE-TIME" value specified in UTC.¶
Clients SHOULD add a "RELATED-TO" property to the new "VALARM" component with a value set to the "UID" property value of the "VALARM" component being snoozed. If the "VALARM" component being snoozed does not already have a "UID" property, the client SHOULD add one. The "RELATED-TO" property added to the new "VALARM" component SHOULD include a "RELTYPE" property parameter with a value set to "SNOOZE".¶
When the "snooze" alarm is triggered and dismissed the client SHOULD remove the corresponding "VALARM" component, or set the "ACKNOWLEDGED" property (see Section 6.1). Alternatively, if the "snooze" alarm is itself "snoozed", the client SHOULD remove the original "snooze" alarm and create a new one, with the appropriate trigger time and relationship set.¶
This specification adds the "SNOOZE" relationship type for use with the "RELTYPE" property defined in Section 3.2.15 of [RFC5545]. This is used to relate a "snoozed" "VALARM" component to the original alarm that the "snooze" was generated for.¶
VALARMs are currently triggered when a specific date-time is reached. It is also desirable to be able to trigger alarms based on location, e.g. when arriving at or departing from a particular location.¶
This specification adds the following properties to "VALARM" components to indicate when an alarm can be triggered based on location.¶
alarmprop /= *(
; the following is OPTIONAL,
; but MUST NOT occur more than once
proximity /
; the following is OPTIONAL,
; and MAY occur more than once, but only
; when a PROXIMITY property is also present
structured-location
)
¶
Typically, when a "PROXIMITY" property is used there is no need to specify a time-based trigger using the "TRIGGER" property. However, since "TRIGGER" is defined as a required property for a "VALARM" component, for backwards compatibility it has to be present, but ignored. To indicate a "TRIGGER" that is to be ignored, clients SHOULD use a value a long time in the past. A value of "19760401T005545Z" has been commonly used for this purpose.¶
This property is defined by the following notation:¶
proximity = "PROXIMITY" proximityparam ":" proximityvalue CRLF
proximityparam = *(
; the following is OPTIONAL,
; and MAY occur more than once
(";" other-param)
)
proximityvalue = "ARRIVE" / "DEPART" /
"CONNECT" / "DISCONNECT" / iana-token / x-name
¶
The following is an example of this property:¶
PROXIMITY:ARRIVE¶
The following example shows a "VALARM" component with a proximity trigger set to trigger when the device running the calendar user agent leaves the vicinity defined by the structured location property. Note use of the "u=" parameter with the "geo" URI to define the precision of the location determination.¶
BEGIN:VALARM UID:77D80D14-906B-4257-963F-85B1E734DBB6 TRIGGER;VALUE=DATE-TIME:19760401T005545Z ACTION:DISPLAY DESCRIPTION:Remember to buy milk TRIGGER;VALUE=DATE-TIME:19760401T005545Z PROXIMITY:DEPART STRUCTURED-LOCATION;VALUE=URI:geo:40.443,-79.945;u=10 END:VALARM¶
VALARMs, if not monitored properly, can be used to "spam" users and/or leak personal information. For instance, an unwanted audio or display alert could be considered spam. Or an email alert could be used to leak a user's location to a third party or to send unsolicited email to multiple users. Therefore, CalDAV clients and servers that accept iCalendar data from a third party (e.g. via iTIP [RFC5546], a subscription feed, or a shared calendar) SHOULD remove all VALARMs from the data prior to storing in their calendar system.¶
Proximity VALARMs, if not used carefully, can leak a user's past, present, or future location. For instance, storing an iCalendar resource containing proxmity VALARMs to a shared calendar on CalDAV server can expose to anyone that has access to that calendar the user's intent to leave from or arrive at a particular location at some future time. Furthermore, if a CalDAV client updates the shared iCalendar resource with an ACKNOWLEDGED property when the alarm is triggered, will leak the exact date and time that the user left from or arrived at the location. Therefore, CalDAV clients that implement proximity alarms SHOULD give users the option of storing and/or acknowledging the alarms on the local device only and not storing the alarm and/or acknowledgment on a remote server.¶
This document defines the following new iCalendar properties to be added to the registry defined in Section 8.2.3 of [RFC5545]:¶
| Property | Status | Reference |
|---|---|---|
| ACKNOWLEDGED | Current | RFCXXXX, Section 6.1 |
| PROXIMITY | Current | RFCXXXX, Section 8.1 |
This document defines the following new iCalendar relationship type to be added to the registry defined in Section 8.3.8 of [RFC5545]:¶
| Relationship Type | Status | Reference |
|---|---|---|
| SNOOZE | Current | RFCXXXX, Section 7.1 |
This document creates a new iCalendar registry for values of the "PROXIMITY" property:¶
| Value | Status | Reference |
|---|---|---|
| ARRIVE | Current | RFCXXXX, Section 8.1 |
| DEPART | Current | RFCXXXX, Section 8.1 |
| CONNECT | Current | RFCXXXX, Section 8.1 |
| DISCONNECT | Current | RFCXXXX, Section 8.1 |
This specification came about via discussions at the Calendaring and Scheduling Consortium. Also, thanks to the following for providing feedback: Bernard Desruisseaux, Mike Douglass, Jacob Farkas, Jeffrey Harris, and Ciny Joy.¶
Changes in ietf-02:¶
Changes in ietf-01:¶
Changes in ietf-00:¶
Changes in daboo-05:¶
Changes in daboo-04:¶
Changes in daboo-03: none - resubmission of -02¶
Changes in daboo-02:¶
Changes in daboo-01:¶