| CoRE Working Group | G. Selander |
| Internet-Draft | J. Mattsson |
| Intended status: Standards Track | F. Palombini |
| Expires: January 27, 2019 | Ericsson AB |
| L. Seitz | |
| RISE SICS | |
| July 26, 2018 |
Object Security for Constrained RESTful Environments (OSCORE)
draft-ietf-core-object-security-14
This document defines Object Security for Constrained RESTful Environments (OSCORE), a method for application-layer protection of the Constrained Application Protocol (CoAP), using CBOR Object Signing and Encryption (COSE). OSCORE provides end-to-end protection between endpoints communicating using CoAP or CoAP-mappable HTTP. OSCORE is designed for constrained nodes and networks supporting a range of proxy operations, including translation between different transport protocols.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on January 27, 2019.
Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
The Constrained Application Protocol (CoAP) [RFC7252] is a web transfer protocol, designed for constrained nodes and networks [RFC7228], and may be mapped from HTTP [RFC8075]. CoAP specifies the use of proxies for scalability and efficiency and references DTLS [RFC6347] for security. CoAP-to-CoAP, HTTP-to-CoAP, and CoAP-to-HTTP proxies require DTLS or TLS [RFC5246] to be terminated at the proxy. The proxy therefore not only has access to the data required for performing the intended proxy functionality, but is also able to eavesdrop on, or manipulate any part of, the message payload and metadata in transit between the endpoints. The proxy can also inject, delete, or reorder packets since they are no longer protected by (D)TLS.
This document defines the Object Security for Constrained RESTful Environments (OSCORE) security protocol, protecting CoAP and CoAP-mappable HTTP requests and responses end-to-end across intermediary nodes such as CoAP forward proxies and cross-protocol translators including HTTP-to-CoAP proxies [RFC8075]. In addition to the core CoAP features defined in [RFC7252], OSCORE supports Observe [RFC7641], Block-wise [RFC7959], No-Response [RFC7967], and PATCH and FETCH [RFC8132]. An analysis of end-to-end security for CoAP messages through some types of intermediary nodes is performed in [I-D.hartke-core-e2e-security-reqs]. OSCORE essentially protects the RESTful interactions; the request method, the requested resource, the message payload, etc. (see Section 4). OSCORE protects neither the CoAP Messaging Layer nor the CoAP Token which may change between the endpoints, and those are therefore processed as defined in [RFC7252]. Additionally, since the message formats for CoAP over unreliable transport [RFC7252] and for CoAP over reliable transport [RFC8323] differ only in terms of CoAP Messaging Layer, OSCORE can be applied to both unreliable and reliable transports (see Figure 1).
+-----------------------------------+ | Application | +-----------------------------------+ +-----------------------------------+ \ | Requests / Responses / Signaling | | |-----------------------------------| | | OSCORE | | CoAP |-----------------------------------| | | Messaging Layer / Message Framing | | +-----------------------------------+ / +-----------------------------------+ | UDP / TCP / ... | +-----------------------------------+
Figure 1: Abstract Layering of CoAP with OSCORE
OSCORE works in very constrained nodes and networks, thanks to its small message size and the restricted code and memory requirements in addition to what is required by CoAP. Examples of the use of OSCORE are given in Appendix A. OSCORE does not depend on underlying layers, and can be used with non-IP transports (e.g., [I-D.bormann-6lo-coap-802-15-ie]). OSCORE may also be used in different ways with HTTP. OSCORE messages may be transported in HTTP, and OSCORE may also be used to protect CoAP-mappable HTTP messages, as described below.
OSCORE is designed to protect as much information as possible while still allowing CoAP proxy operations (Section 10). It works with existing CoAP-to-CoAP forward proxies [RFC7252], but an OSCORE-aware proxy will be more efficient. HTTP-to-CoAP proxies [RFC8075] and CoAP-to-HTTP proxies can also be used with OSCORE, as specified in Section 11. OSCORE may be used together with TLS or DTLS over one or more hops in the end-to-end path, e.g. transported with HTTPS in one hop and with plain CoAP in another hop. The use of OSCORE does not affect the URI scheme and OSCORE can therefore be used with any URI scheme defined for CoAP or HTTP. The application decides the conditions for which OSCORE is required.
OSCORE uses pre-shared keys which may have been established out-of-band or with a key establishment protocol (see Section 3.2). The technical solution builds on CBOR Object Signing and Encryption (COSE) [RFC8152], providing end-to-end encryption, integrity, replay protection, and binding of response to request. A compressed version of COSE is used, as specified in Section 6. The use of OSCORE is signaled in CoAP with a new option (Section 2), and in HTTP with a new header field (Section 11.1) and content type (Section 13.5). The solution transforms a CoAP/HTTP message into an “OSCORE message” before sending, and vice versa after receiving. The OSCORE message is a CoAP/HTTP message related to the original message in the following way: the original CoAP/HTTP message is translated to CoAP (if not already in CoAP) and protected in a COSE object. The encrypted message fields of this COSE object are transported in the CoAP payload/HTTP body of the OSCORE message, and the OSCORE option/header field is included in the message. A sketch of an exchange of OSCORE messages, in the case of the original message being CoAP, is provided in Figure 2.
Client Server
| OSCORE request - POST example.com: |
| Header, Token, |
| Options: {OSCORE, ...}, |
| Payload: COSE ciphertext |
+--------------------------------------------->|
| |
|<---------------------------------------------+
| OSCORE response - 2.04 (Changed): |
| Header, Token, |
| Options: {OSCORE, ...}, |
| Payload: COSE ciphertext |
| |
Figure 2: Sketch of CoAP with OSCORE
An implementation supporting this specification MAY implement only the client part, MAY implement only the server part, or MAY implement only one of the proxy parts.
The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “NOT RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
Readers are expected to be familiar with the terms and concepts described in CoAP [RFC7252], Observe [RFC7641], Block-wise [RFC7959], COSE [RFC8152], CBOR [RFC7049], CDDL [I-D.ietf-cbor-cddl] as summarized in Appendix E, and constrained environments [RFC7228].
The term “hop” is used to denote a particular leg in the end-to-end path. The concept “hop-by-hop” (as in “hop-by-hop encryption” or “hop-by-hop fragmentation”) opposed to “end-to-end”, is used in this document to indicate that the messages are processed accordingly in the intermediaries, rather than just forwarded to the next node.
The term “stop processing” is used throughout the document to denote that the message is not passed up to the CoAP Request/Response layer (see Figure 1).
The terms Common/Sender/Recipient Context, Master Secret/Salt, Sender ID/Key, Recipient ID/Key, ID Context, and Common IV are defined in Section 3.1.
The OSCORE option (see Figure 3, which extends Table 4 of [RFC7252]) indicates that the CoAP message is an OSCORE message and that it contains a compressed COSE object (see Sections 5 and 6). The OSCORE option is critical, safe to forward, part of the cache key, and not repeatable.
+------+---+---+---+---+----------------+--------+--------+---------+
| No. | C | U | N | R | Name | Format | Length | Default |
+------+---+---+---+---+----------------+--------+--------+---------+
| TBD1 | x | | | | OSCORE | (*) | 0-255 | (none) |
+------+---+---+---+---+----------------+--------+--------+---------+
C = Critical, U = Unsafe, N = NoCacheKey, R = Repeatable
(*) See below.
Figure 3: The OSCORE Option
The OSCORE option includes the OSCORE flag bits (Section 6), the Sender Sequence Number, the Sender ID, and the ID Context when these fields are present (Section 3). The detailed format and length is specified in Section 6. If the OSCORE flag bits are all zero (0x00) the Option value SHALL be empty (Option Length = 0). An endpoint receiving a CoAP message without payload, that also contains an OSCORE option SHALL treat it as malformed and reject it.
A successful response to a request with the OSCORE option SHALL contain the OSCORE option. Whether error responses contain the OSCORE option depends on the error type (see Section 8).
For CoAP proxy operations, see Section 10.
OSCORE requires that client and server establish a shared security context used to process the COSE objects. OSCORE uses COSE with an Authenticated Encryption with Additional Data (AEAD, [RFC5116]) algorithm for protecting message data between a client and a server. In this section, we define the security context and how it is derived in client and server based on a shared secret and a key derivation function (KDF).
The security context is the set of information elements necessary to carry out the cryptographic operations in OSCORE. For each endpoint, the security context is composed of a “Common Context”, a “Sender Context”, and a “Recipient Context”.
The endpoints protect messages to send using the Sender Context and verify messages received using the Recipient Context, both contexts being derived from the Common Context and other data. Clients and servers need to be able to retrieve the correct security context to use.
An endpoint uses its Sender ID (SID) to derive its Sender Context, and the other endpoint uses the same ID, now called Recipient ID (RID), to derive its Recipient Context. In communication between two endpoints, the Sender Context of one endpoint matches the Recipient Context of the other endpoint, and vice versa. Thus, the two security contexts identified by the same IDs in the two endpoints are not the same, but they are partly mirrored. Retrieval and use of the security context are shown in Figure 4.
.-------------. .-------------.
| Common, | | Common, |
| Sender, | | Recipient, |
| Recipient | | Sender |
'-------------' '-------------'
Client Server
| |
Retrieve context for | OSCORE request: |
target resource | Token = Token1, |
Protect request with | kid = SID, ... |
Sender Context +---------------------->| Retrieve context with
| | RID = kid
| | Verify request with
| | Recipient Context
| OSCORE response: | Protect response with
| Token = Token1, ... | Sender Context
Retrieve context with |<----------------------+
Token = Token1 | |
Verify request with | |
Recipient Context | |
Figure 4: Retrieval and Use of the Security Context
The Common Context contains the following parameters:
The Sender Context contains the following parameters:
The Recipient Context contains the following parameters:
All parameters except Sender Sequence Number and Replay Window are immutable once the security context is established. An endpoint may free up memory by not storing the Common IV, Sender Key, and Recipient Key, deriving them when needed. Alternatively, an endpoint may free up memory by not storing the Master Secret and Master Salt after the other parameters have been derived.
Endpoints MAY operate as both client and server and use the same security context for those roles. Independent of being client or server, the endpoint protects messages to send using its Sender Context, and verifies messages received using its Recipient Context. The endpoints MUST NOT change the Sender/Recipient ID when changing roles. In other words, changing the roles does not change the set of keys to be used.
The parameters in the security context are derived from a small set of input parameters. The following input parameters SHALL be pre-established:
The following input parameters MAY be pre-established. In case any of these parameters is not pre-established, the default value indicated below is used:
All input parameters need to be known to and agreed on by both endpoints, but the replay window may be different in the two endpoints. The way the input parameters are pre-established, is application specific. Considerations of security context establishment are given in Section 12.2 and examples of deploying OSCORE in Appendix B.
The KDF MUST be one of the HMAC based HKDF [RFC5869] algorithms defined for COSE [RFC8152]. HKDF SHA-256 is mandatory to implement. The security context parameters Sender Key, Recipient Key, and Common IV SHALL be derived from the input parameters using the HKDF, which consists of the composition of the HKDF-Extract and HKDF-Expand steps [RFC5869]:
output parameter = HKDF(salt, IKM, info, L)
where:
info = [
id : bstr,
id_context : bstr / nil,
alg_aead : int / tstr,
type : tstr,
L : uint
]
where:
For example, if the algorithm AES-CCM-16-64-128 (see Section 10.2 in [RFC8152]) is used, the integer value for alg_aead is 10, the value for L is 16 for keys and 13 for the Common IV.
Note that [RFC5869] specifies that if the salt is not provided, it is set to a string of zeros. For implementation purposes, not providing the salt is the same as setting the salt to the empty byte string. OSCORE sets the salt default value to empty byte string, which in [RFC5869] is converted to a string of zeroes (see Section 2.2 of [RFC5869]).
The Sender Sequence Number is initialized to 0. The supported types of replay protection and replay window length is application specific and depends on how OSCORE is transported, see Section 7.4. The default is DTLS-type replay protection with a window size of 32 initiated as described in Section 4.1.2.6 of [RFC6347].
To ensure unique Sender Keys, the quartet (Master Secret, Master Salt, ID Context, Sender ID) MUST be unique, i.e. the pair (ID Context, Sender ID) SHALL be unique in the set of all security contexts using the same Master Secret and Master Salt. This means that Sender ID SHALL be unique in the set of all security contexts using the same Master Secret, Master Salt, and ID Context; such a requirement guarantees unique (key, nonce) pairs, which avoids nonce reuse.
Different methods can be used to assign Sender IDs: a protocol that allows the parties to negotiate locally unique identifiers, a trusted third party (e.g., [I-D.ietf-ace-oauth-authz]), or the identifiers can be assigned out-of-band. The Sender IDs can be very short (note that the empty string is a legitimate value). The maximum length of Sender ID in bytes equals the length of AEAD nonce minus 6. For AES-CCM-16-64-128 the maximum length of Sender ID is 7 bytes.
To simplify retrieval of the right Recipient Context, the Recipient ID SHOULD be unique in the sets of all Recipient Contexts used by an endpoint. If an endpoint has the same Recipient ID with different Recipient Contexts, i.e. the Recipient Contexts are derived from different Common Contexts, then the endpoint may need to try multiple times before verifying the right security context associated to the Recipient ID.
The ID Context is used to distinguish between security contexts. The methods used for assigning Sender ID can also be used for assigning the ID Context. Additionally, the ID Context can be generated by the client (see Appendix B.2). ID Context can be arbitrarily long.
OSCORE transforms a CoAP message (which may have been generated from an HTTP message) into an OSCORE message, and vice versa. OSCORE protects as much of the original message as possible while still allowing certain proxy operations (see Sections 10 and 11). This section defines how OSCORE protects the message fields and transfers them end-to-end between client and server (in any direction).
The remainder of this section and later sections focus on the behavior in terms of CoAP messages. If HTTP is used for a particular hop in the end-to-end path, then this section applies to the conceptual CoAP message that is mappable to/from the original HTTP message as discussed in Section 11. That is, an HTTP message is conceptually transformed to a CoAP message and then to an OSCORE message, and similarly in the reverse direction. An actual implementation might translate directly from HTTP to OSCORE without the intervening CoAP representation.
Protection of Signaling messages (Section 5 of [RFC8323]) is specified in Section 4.3. The other parts of this section target Request/Response messages.
Message fields of the CoAP message may be protected end-to-end between CoAP client and CoAP server in different ways:
The sending endpoint SHALL transfer Class E message fields in the ciphertext of the COSE object in the OSCORE message. The sending endpoint SHALL include Class I message fields in the Additional Authenticated Data (AAD) of the AEAD algorithm, allowing the receiving endpoint to detect if the value has changed in transfer. Class U message fields SHALL NOT be protected in transfer. Class I and Class U message field values are transferred in the header or options part of the OSCORE message, which is visible to proxies.
Message fields not visible to proxies, i.e., transported in the ciphertext of the COSE object, are called “Inner” (Class E). Message fields transferred in the header or options part of the OSCORE message, which is visible to proxies, are called “Outer” (Class I or U). There are currently no Class I options defined.
An OSCORE message may contain both an Inner and an Outer instance of a certain CoAP message field. Inner message fields are intended for the receiving endpoint, whereas Outer message fields are used to enable proxy operations.
A summary of how options are protected is shown in Figure 5. Note that some options may have both Inner and Outer message fields which are protected accordingly. Certain options require special processing as is described in Section 4.1.3.
+------+-----------------+---+---+ | No. | Name | E | U | +------+-----------------+---+---+ | 1 | If-Match | x | | | 3 | Uri-Host | | x | | 4 | ETag | x | | | 5 | If-None-Match | x | | | 6 | Observe | x | x | | 7 | Uri-Port | | x | | 8 | Location-Path | x | | | TBD1 | OSCORE | | x | | 11 | Uri-Path | x | | | 12 | Content-Format | x | | | 14 | Max-Age | x | x | | 15 | Uri-Query | x | | | 17 | Accept | x | | | 20 | Location-Query | x | | | 23 | Block2 | x | x | | 27 | Block1 | x | x | | 28 | Size2 | x | x | | 35 | Proxy-Uri | | x | | 39 | Proxy-Scheme | | x | | 60 | Size1 | x | x | | 258 | No-Response | x | x | +------+-----------------+---+---+ E = Encrypt and Integrity Protect (Inner) U = Unprotected (Outer)
Figure 5: Protection of CoAP Options
Options that are unknown or for which OSCORE processing is not defined SHALL be processed as class E (and no special processing). Specifications of new CoAP options SHOULD define how they are processed with OSCORE. A new COAP option SHOULD be of class E unless it requires proxy processing. If a new CoAP option is of class U, the potential issues with the option being unprotected SHOULD be documented (see Appendix D.4).
Inner option message fields (class E) are used to communicate directly with the other endpoint.
The sending endpoint SHALL write the Inner option message fields present in the original CoAP message into the plaintext of the COSE object (Section 5.3), and then remove the Inner option message fields from the OSCORE message.
The processing of Inner option message fields by the receiving endpoint is specified in Sections 8.2 and 8.4.
Outer option message fields (Class U or I) are used to support proxy operations, see Appendix D.1.
The sending endpoint SHALL include the Outer option message field present in the original message in the options part of the OSCORE message. All Outer option message fields, including the OSCORE option, SHALL be encoded as described in Section 3.1 of [RFC7252], where the delta is the difference to the previously included instance of Outer option message field.
The processing of Outer options by the receiving endpoint is specified in Sections 8.2 and 8.4.
A procedure for integrity-protection-only of Class I option message fields is specified in Section 5.4. Specifications that introduce repeatable Class I options MUST specify that proxies MUST NOT change the order of the instances of such an option in the CoAP message.
Note: There are currently no Class I option message fields defined.
Some options require special processing as specified in this section.
An Inner Max-Age message field is used to indicate the maximum time a response may be cached by the client (as defined in [RFC7252]), end-to-end from the server to the client, taking into account that the option is not accessible to proxies. The Inner Max-Age SHALL be processed by OSCORE as a normal Inner option, specified in Section 4.1.1.
An Outer Max-Age message field is used to avoid unnecessary caching of error responses caused by OSCORE processing at OSCORE-unaware intermediary nodes. A server MAY set a Class U Max-Age message field with value zero to such error responses, described in Sections 7.4, 8.2, and 8.4, since these error responses are cacheable, but subsequent OSCORE requests would never create a hit in the intermediary caching it. Setting the Outer Max-Age to zero relieves the intermediary from uselessly caching responses. Successful OSCORE responses do not need to include an Outer Max-Age option since the responses appear to the OSCORE-unaware intermediary as 2.04 Changed responses, which are non-cacheable (see Section 4.2).
The Outer Max-Age message field is processed according to Section 4.1.2.
When the Uri-Host and Uri-Port are set to their default values (see Section 5.10.1 [RFC7252]), they are omitted from the message (Section 5.4.4 of [RFC7252]), which is favorable both for overhead and privacy.
In order to support forward proxy operations, Proxy-Scheme, Uri-Host, and Uri-Port need to be Class U. For the use of Proxy-Uri, see Section 4.1.3.3.
Manipulation of unprotected message fields (including Uri-Host, Uri-Port, destination IP/port or request scheme) MUST NOT lead to an OSCORE message becoming verified by an unintended server. Different servers SHOULD have different security contexts.
When Proxy-Uri is present, the client SHALL first decompose the Proxy-Uri value of the original CoAP message into the Proxy-Scheme, Uri-Host, Uri-Port, Uri-Path, and Uri-Query options according to Section 6.4 of [RFC7252].
Uri-Path and Uri-Query are class E options and SHALL be protected and processed as Inner options (Section 4.1.1).
The Proxy-Uri option of the OSCORE message SHALL be set to the composition of Proxy-Scheme, Uri-Host, and Uri-Port options as specified in Section 6.5 of [RFC7252], and processed as an Outer option of Class U (Section 4.1.2).
Note that replacing the Proxy-Uri value with the Proxy-Scheme and Uri-* options works by design for all CoAP URIs (see Section 6 of [RFC7252]). OSCORE-aware HTTP servers should not use the userinfo component of the HTTP URI (as defined in Section 3.2.1 of [RFC3986]), so that this type of replacement is possible in the presence of CoAP-to-HTTP proxies (see Section 11.2). In future specifications of cross-protocol proxying behavior using different URI structures, it is expected that the authors will create Uri-* options that allow decomposing the Proxy-Uri, and specifying the OSCORE processing.
An example of how Proxy-Uri is processed is given here. Assume that the original CoAP message contains:
During OSCORE processing, Proxy-Uri is split into:
Uri-Path and Uri-Query follow the processing defined in Section 4.1.1, and are thus encrypted and transported in the COSE object:
The remaining options are composed into the Proxy-Uri included in the options part of the OSCORE message, which has value:
See Sections 6.1 and 12.6 of [RFC7252] for more details.
Block-wise [RFC7959] is an optional feature. An implementation MAY support [RFC7252] and the OSCORE option without supporting block-wise transfers. The Block options (Block1, Block2, Size1, Size2), when Inner message fields, provide secure message segmentation such that each segment can be verified. The Block options, when Outer message fields, enables hop-by-hop fragmentation of the OSCORE message. Inner and Outer block processing may have different performance properties depending on the underlying transport. The end-to-end integrity of the message can be verified both in case of Inner and Outer Block-wise transfers provided all blocks are received.
The sending CoAP endpoint MAY fragment a CoAP message as defined in [RFC7959] before the message is processed by OSCORE. In this case the Block options SHALL be processed by OSCORE as normal Inner options (Section 4.1.1). The receiving CoAP endpoint SHALL process the OSCORE message before processing Block-wise as defined in [RFC7959].
Proxies MAY fragment an OSCORE message using [RFC7959], by introducing Block option message fields that are Outer (Section 4.1.2). Note that the Outer Block options are neither encrypted nor integrity protected. As a consequence, a proxy can maliciously inject block fragments indefinitely, since the receiving endpoint needs to receive the last block (see [RFC7959]) to be able to compose the OSCORE message and verify its integrity. Therefore, applications supporting OSCORE and [RFC7959] MUST specify a security policy defining a maximum unfragmented message size (MAX_UNFRAGMENTED_SIZE) considering the maximum size of message which can be handled by the endpoints. Messages exceeding this size SHOULD be fragmented by the sending endpoint using Inner Block options (Section 4.1.3.4.1).
An endpoint receiving an OSCORE message with an Outer Block option SHALL first process this option according to [RFC7959], until all blocks of the OSCORE message have been received, or the cumulated message size of the blocks exceeds MAX_UNFRAGMENTED_SIZE. In the former case, the processing of the OSCORE message continues as defined in this document. In the latter case the message SHALL be discarded.
Because of encryption of Uri-Path and Uri-Query, messages to the same server may, from the point of view of a proxy, look like they also target the same resource. A proxy SHOULD mitigate a potential mix-up of blocks from concurrent requests to the same server, for example using the Request-Tag processing specified in Section 3.3.2 of [I-D.ietf-core-echo-request-tag].
Observe [RFC7641] is an optional feature. An implementation MAY support [RFC7252] and the OSCORE option without supporting [RFC7641], in which case the Observe related processing can be omitted.
The support for Observe [RFC7641] with OSCORE targets the requirements on forwarding of Section 2.2.1 of [I-D.hartke-core-e2e-security-reqs], i.e. that observations go through intermediary nodes, as illustrated in Figure 8 of [RFC7641].
Inner Observe SHALL be used to protect the value of the Observe option between the endpoints. Outer Observe SHALL be used to support forwarding by intermediary nodes.
The server SHALL include a new Partial IV in responses (with or without the Observe option) to Observe registrations, except for the first response where Partial IV MAY be omitted.
[RFC7252] does not specify how the server should act upon receiving the same Token in different requests. When using OSCORE, the server SHOULD NOT remove an active observation just because it receives a request with the same Token.
Since POST with Observe is not defined, for messages with Observe, the Outer Code MUST be set to 0.05 (FETCH) for requests and to 2.05 (Content) for responses (see Section 4.2).
The Inner and Outer Observe in the request MUST contain the Observe value of the original CoAP request; 0 (registration) or 1 (cancellation).
Every time a client issues a new Observe request, a new Partial IV MUST be used (see Section 5), and so the payload and OSCORE option are changed. The server uses the Partial IV of the new request as the ‘request_piv’ of all associated notifications (see Section 5.4).
Intermediaries are not assumed to have access to the OSCORE security context used by the endpoints, and thus cannot make requests or transform responses with the OSCORE option which verify at the receiving endpoint as coming from the other endpoint. This has the following consequences and limitations for Observe operations.
If the server accepts an Observe registration, a Partial IV MUST be included in all notifications (both successful and error), except for the first one where Partial IV MAY be omitted. To protect against replay, the client SHALL maintain a Notification Number for each Observation it registers. The Notification Number is a non-negative integer containing the largest Partial IV of the received notifications for the associated Observe registration. Further details of replay protection of notifications are specified in Section 7.4.1.
For notifications, the Inner Observe value MUST be empty (see Section 3.2 of [RFC7252]). The Outer Observe in a notification is needed for intermediary nodes to allow multiple responses to one request, and may be set to the value of Observe in the original CoAP message. The client performs ordering of notifications and replay protection by comparing their Partial IVs and SHALL ignore the outer Observe value.
If the client receives a response to an Observe request without an Inner Observe option, then it verifies the response as a non-Observe response, as specified in Section 8.4. If the client receives a response to a non-Observe request with an Inner Observe option, then it stops processing the message, as specified in Section 8.4.
A client MUST consider the notification with the highest Partial IV as the freshest, regardless of the order of arrival. In order to support existing Observe implementations the OSCORE client implementation MAY set the Observe value to the three least significant bytes of the Partial IV; such an implementation needs to make sure that the Observe value for an observe notification without Partial IV is smaller than a notification with Partial IV.
No-Response [RFC7967] is an optional feature used by the client to communicate its disinterest in certain classes of responses to a particular request. An implementation MAY support [RFC7252] and the OSCORE option without supporting [RFC7967].
If used, No-Response MUST be Inner. The Inner No-Response SHALL be processed by OSCORE as specified in Section 4.1.1. The Outer option SHOULD NOT be present. The server SHALL ignore the Outer No-Response option. The client MAY set the Outer No-Response value to 26 (‘suppress all known codes’) if the Inner value is set to 26. The client MUST be prepared to receive and discard 5.04 Gateway Timeout error messages from intermediaries potentially resulting from destination time out due to no response.
The OSCORE option is only defined to be present in OSCORE messages, as an indication that OSCORE processing have been performed. The content in the OSCORE option is neither encrypted nor integrity protected as a whole but some part of the content of this option is protected (see Section 5.4). Nested use of OSCORE is not supported: If OSCORE processing detects an OSCORE option in the original CoAP message, then processing SHALL be stopped.
A summary of how the CoAP header fields and payload are protected is shown in Figure 6, including fields specific to CoAP over UDP and CoAP over TCP (marked accordingly in the table).
+------------------+---+---+
| Field | E | U |
+------------------+---+---+
| Version (UDP) | | x |
| Type (UDP) | | x |
| Length (TCP) | | x |
| Token Length | | x |
| Code | x | |
| Message ID (UDP) | | x |
| Token | | x |
| Payload | x | |
+------------------+---+---+
E = Encrypt and Integrity Protect (Inner)
U = Unprotected (Outer)
Figure 6: Protection of CoAP Header Fields and Payload
Most CoAP Header fields (i.e. the message fields in the fixed 4-byte header) are required to be read and/or changed by CoAP proxies and thus cannot in general be protected end-to-end between the endpoints. As mentioned in Section 1, OSCORE protects the CoAP Request/Response layer only, and not the Messaging Layer (Section 2 of [RFC7252]), so fields such as Type and Message ID are not protected with OSCORE.
The CoAP Header field Code is protected by OSCORE. Code SHALL be encrypted and integrity protected (Class E) to prevent an intermediary from eavesdropping on or manipulating the Code (e.g., changing from GET to DELETE).
The sending endpoint SHALL write the Code of the original CoAP message into the plaintext of the COSE object (see Section 5.3). After that, the sending endpoint writes an Outer Code to the OSCORE message. With one exception (see Section 4.1.3.5) the Outer Code SHALL be set to 0.02 (POST) for requests and to 2.04 (Changed) for responses. The receiving endpoint SHALL discard the Outer Code in the OSCORE message and write the Code of the COSE object plaintext (Section 5.3) into the decrypted CoAP message.
The other currently defined CoAP Header fields are Unprotected (Class U). The sending endpoint SHALL write all other header fields of the original message into the header of the OSCORE message. The receiving endpoint SHALL write the header fields from the received OSCORE message into the header of the decrypted CoAP message.
The CoAP Payload, if present in the original CoAP message, SHALL be encrypted and integrity protected and is thus an Inner message field. The sending endpoint writes the payload of the original CoAP message into the plaintext (Section 5.3) input to the COSE object. The receiving endpoint verifies and decrypts the COSE object, and recreates the payload of the original CoAP message.
Signaling messages (CoAP Code 7.00-7.31) were introduced to exchange information related to an underlying transport connection in the specific case of CoAP over reliable transports [RFC8323].
OSCORE MAY be used to protect Signaling if the endpoints for OSCORE coincide with the endpoints for the signaling message. If OSCORE is used to protect Signaling then:
NOTE: Option numbers for Signaling messages are specific to the CoAP Code (see Section 5.2 of [RFC8323]).
If OSCORE is not used to protect Signaling, Signaling messages SHALL be unaltered by OSCORE.
This section defines how to use COSE [RFC8152] to wrap and protect data in the original message. OSCORE uses the untagged COSE_Encrypt0 structure with an Authenticated Encryption with Additional Data (AEAD) algorithm. The key lengths, IV length, nonce length, and maximum Sender Sequence Number are algorithm dependent.
The AEAD algorithm AES-CCM-16-64-128 defined in Section 10.2 of [RFC8152] is mandatory to implement. For AES-CCM-16-64-128 the length of Sender Key and Recipient Key is 128 bits, the length of nonce and Common IV is 13 bytes. The maximum Sender Sequence Number is specified in Section 12.
As specified in [RFC5116], plaintext denotes the data that is to be encrypted and integrity protected, and Additional Authenticated Data (AAD) denotes the data that is to be integrity protected only.
The COSE Object SHALL be a COSE_Encrypt0 object with fields defined as follows
The encryption process is described in Section 5.3 of [RFC8152].
For certain use cases, e.g. deployments where the same Sender ID is used with multiple contexts, it is possible (and sometimes necessary, see Section 3.3) for the client to use an ID Context to distinguish the security contexts (see Section 3.1). For example:
The Sender ID and Context ID are used to establish the necessary input parameters and in the derivation of the security context (see Section 3.2). Whereas the ‘kid’ parameter is used to transport the Sender ID, the new COSE header parameter ‘kid context’ is used to transport the ID Context, see Figure 7.
+----------+--------+------------+----------------+-----------------+ | name | label | value type | value registry | description | +----------+--------+------------+----------------+-----------------+ | kid | TBD2 | bstr | | Identifies the | | context | | | | context for kid | +----------+--------+------------+----------------+-----------------+
Figure 7: Common Header Parameter kid context for the COSE object
The AEAD nonce is constructed in the following way (see Figure 8):
Note that in this specification only algorithms that use nonces equal or greater than 7 bytes are supported. The nonce construction with S, ID_PIV, and PIV together with endpoint unique IDs and encryption keys makes it easy to verify that the nonces used with a specific key will be unique, see Appendix D.3.
If the Partial IV is not present in a response, the nonce from the request is used. For responses that are not notifications (i.e. when there is a single response to a request), the request and the response should typically use the same nonce to reduce message overhead. Both alternatives provide all the required security properties, see Section 7.4 and Appendix D.3. The only non-Observe scenario where a Partial IV must be included in a response is when the server is unable to perform replay protection, see Section 7.5.2. For processing instructions see Section 8.
<- nonce length minus 6 B -> <-- 5 bytes -->
+---+-------------------+--------+---------+-----+
| S | padding | ID_PIV | padding | PIV |----+
+---+-------------------+--------+---------+-----+ |
|
<---------------- nonce length ----------------> |
+------------------------------------------------+ |
| Common IV |->(XOR)
+------------------------------------------------+ |
|
<---------------- nonce length ----------------> |
+------------------------------------------------+ |
| Nonce |<---+
+------------------------------------------------+
Figure 8: AEAD Nonce Formation
The plaintext is formatted as a CoAP message without Header (see Figure 9) consisting of:
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Code | Class E options (if any) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |1 1 1 1 1 1 1 1| Payload (if any) ... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ (only if there is payload)
Figure 9: Plaintext
NOTE: The plaintext contains all CoAP data that needs to be encrypted end-to-end between the endpoints.
The external_aad SHALL be a CBOR array as defined below:
external_aad = [ oscore_version : uint, algorithms : [ alg_aead : int / tstr ], request_kid : bstr, request_piv : bstr, options : bstr ]
where:
The oscore_version and algorithms parameters are established out-of-band and are thus never transported in OSCORE, but the external_aad allows to verify that they are the same in both endpoints.
NOTE: The format of the external_aad is for simplicity the same for requests and responses, although some parameters, e.g. request_kid, need not be integrity protected in all requests.
The Additional Authenticated Data (AAD) is composed from the external_add as described in Section 5.3 of [RFC8152].
The Concise Binary Object Representation (CBOR) [RFC7049] combines very small message sizes with extensibility. The CBOR Object Signing and Encryption (COSE) [RFC8152] uses CBOR to create compact encoding of signed and encrypted data. COSE is however constructed to support a large number of different stateless use cases, and is not fully optimized for use as a stateful security protocol, leading to a larger than necessary message expansion. In this section, we define a stateless header compression mechanism, simply removing redundant information from the COSE objects, which significantly reduces the per-packet overhead. The result of applying this mechanism to a COSE object is called the “compressed COSE object”.
The COSE_Encrypt0 object used in OSCORE is transported in the OSCORE option and in the Payload. The Payload contains the Ciphertext of the COSE object. The headers of the COSE object are compactly encoded as described in the next section.
The value of the OSCORE option SHALL contain the OSCORE flag bits, the Partial IV parameter, the kid context parameter (length and value), and the kid parameter as follows:
0 1 2 3 4 5 6 7 <------------- n bytes --------------> +-+-+-+-+-+-+-+-+-------------------------------------- |0 0 0|h|k| n | Partial IV (if any) ... +-+-+-+-+-+-+-+-+-------------------------------------- <- 1 byte -> <----- s bytes ------> +------------+----------------------+------------------+ | s (if any) | kid context (if any) | kid (if any) ... | +------------+----------------------+------------------+
Figure 10: The OSCORE Option Value
The flag bits are registered in the OSCORE Octet registry specified in Section 13.7.
Note that the kid MUST be the last field of the OSCORE option value, even in case reserved bits are used and additional fields are added to it.
The length of the OSCORE option thus depends on the presence and length of Partial IV, kid context, kid, as specified in this section, and on the presence and length of the other parameters, as defined in the separate documents.
The payload of the OSCORE message SHALL encode the ciphertext of the COSE object.
This section covers a list of OSCORE Header Compression examples for requests and responses. The examples assume the COSE_Encrypt0 object is set (which means the CoAP message and cryptographic material is known). Note that the full CoAP unprotected message, as well as the full security context, is not reported in the examples, but only the input necessary to the compression mechanism, i.e. the COSE_Encrypt0 object. The output is the compressed COSE object as defined in Section 6, divided into two parts, since the object is transported in two CoAP fields: OSCORE option and payload.
Before compression (24 bytes):
[
h'',
{ 4:h'25', 6:h'05' },
h'aea0155667924dff8a24e4cb35b9'
]
After compression (17 bytes):
Flag byte: 0b00001001 = 0x09
Option Value: 09 05 25 (3 bytes)
Payload: ae a0 15 56 67 92 4d ff 8a 24 e4 cb 35 b9 (14 bytes)
Before compression (23 bytes):
[
h'',
{ 4:h'', 6:h'00' },
h'aea0155667924dff8a24e4cb35b9'
]
After compression (16 bytes):
Flag byte: 0b00001001 = 0x09
Option Value: 09 00 (2 bytes)
Payload: ae a0 15 56 67 92 4d ff 8a 24 e4 cb 35 b9 (14 bytes)
Before compression (30 bytes):
[
h'',
{ 4:h'', 6:h'05', 8:h'44616c656b' },
h'aea0155667924dff8a24e4cb35b9'
]
After compression (22 bytes):
Flag byte: 0b00011001 = 0x19
Option Value: 19 05 05 44 61 6c 65 6b (8 bytes)
Payload: ae a0 15 56 67 92 4d ff 8a 24 e4 cb 35 b9 (14 bytes)
Before compression (18 bytes):
[
h'',
{},
h'aea0155667924dff8a24e4cb35b9'
]
After compression (14 bytes):
Flag byte: 0b00000000 = 0x00
Option Value: (0 bytes)
Payload: ae a0 15 56 67 92 4d ff 8a 24 e4 cb 35 b9 (14 bytes)
Before compression (21 bytes):
[
h'',
{ 6:h'07' },
h'aea0155667924dff8a24e4cb35b9'
]
After compression (16 bytes):
Flag byte: 0b00000001 = 0x01
Option Value: 01 07 (2 bytes)
Payload: ae a0 15 56 67 92 4d ff 8a 24 e4 cb 35 b9 (14 bytes)
In order to prevent response delay and mismatch attacks [I-D.mattsson-core-coap-actuators] from on-path attackers and compromised intermediaries, OSCORE binds responses to the requests by including the kid and Partial IV of the request in the AAD of the response. The server therefore needs to store the kid and Partial IV of the request until all responses have been sent.
An AEAD nonce MUST NOT be used more than once per AEAD key. The uniqueness of (key, nonce) pairs is shown in Appendix D.3, and in particular depends on a correct usage of Partial IVs (which encode the Sender Sequence Numbers, see Section 5). If messages are processed concurrently, the operation of reading and increasing the Sender Sequence Number MUST be atomic.
The maximum Sender Sequence Number is algorithm dependent (see Section 12), and SHALL be less than 2^40. If the Sender Sequence Number exceeds the maximum, the endpoint MUST NOT process any more messages with the given Sender Context. If necessary, the endpoint SHOULD acquire a new security context before this happens. The latter is out of scope of this document.
For requests, OSCORE provides only the guarantee that the request is not older than the security context. For applications having stronger demands on request freshness (e.g., control of actuators), OSCORE needs to be augmented with mechanisms providing freshness, for example as specified in [I-D.ietf-core-echo-request-tag].
Assuming an honest server (see Appendix D), the message binding guarantees that a response is not older than its request. For responses that are not notifications (i.e. when there is a single response to a request), this gives absolute freshness. For notifications, the absolute freshness gets weaker with time, and it is RECOMMENDED that the client regularly re-register the observation. Note that the message binding does not guarantee that misbehaving server created the response before receiving the request, i.e. it does not verify server aliveness.
For requests and notifications, OSCORE also provides relative freshness in the sense that the received Partial IV allows a recipient to determine the relative order of requests or responses.
In order to protect from replay of requests, the server’s Recipient Context includes a Replay Window. A server SHALL verify that a Partial IV received in the COSE object has not been received before. If this verification fails the server SHALL stop processing the message, and MAY optionally respond with a 4.01 Unauthorized error message. Also, the server MAY set an Outer Max-Age option with value zero, to inform any intermediary that the response is not to be cached. The diagnostic payload MAY contain the “Replay detected” string. The size and type of the Replay Window depends on the use case and the protocol with which the OSCORE message is transported. In case of reliable and ordered transport from endpoint to endpoint, e.g. TCP, the server MAY just store the last received Partial IV and require that newly received Partial IVs equals the last received Partial IV + 1. However, in case of mixed reliable and unreliable transports and where messages may be lost, such a replay mechanism may be too restrictive and the default replay window be more suitable (see Section 3.2.2).
Responses (with or without Partial IV) are protected against replay as they are bound to the request and the fact that only a single response is accepted. Note that the Partial IV is not used for replay protection in this case.
The operation of validating the Partial IV and updating the replay protection MUST be atomic.
The following applies additionally when Observe is supported.
The Notification Number is initialized to the Partial IV of the first successfully verified notification in response to the registration request. A client MUST only accept at most one Observe notifications without Partial IV, and treat it as the oldest notification received. A client receiving a notification containing a Partial IV SHALL compare the Partial IV with the Notification Number associated to that Observe registration. The client MUST stop processing notifications with a Partial IV which has been previously received. Applications MAY decide that a client only processes notifications which have greater Partial IV than the Notification Number.
If the verification of the response succeeds, and the received Partial IV was greater than the Notification Number then the client SHALL overwrite the corresponding Notification Number with the received Partial IV.
To prevent reuse of an AEAD nonce with the same key, or from accepting replayed messages, an endpoint needs to handle the situation of losing rapidly changing parts of the context, such as the request Token, Sender Sequence Number, Replay Window, and Notification Numbers. These are typically stored in RAM and therefore lost in the case of an unplanned reboot.
After boot, an endpoint can either use a persistently stored complete or partial security context, or establish a new security context with each endpoint it communicates with. However, establishing a fresh security context may have a non-negligible cost in terms of, e.g., power consumption.
If the endpoint uses a persistently stored partial security context, it MUST NOT reuse a previous Sender Sequence Number and MUST NOT accept previously received messages. Some ways to achieve this are described in the following sections.
To prevent reuse of Sender Sequence Numbers, an endpoint may perform the following procedure during normal operations:
To prevent accepting replay of previously received requests, the server may perform the following procedure after boot:
If the server using the Echo option can verify a second request as fresh, then the Partial IV of the second request is set as the lower limit of the replay window.
To prevent accepting replay of previously received notifications, the client may perform the following procedure after boot:
This section describes the OSCORE message processing. Additional processing for Observe or Block-wise are described in subsections.
Note that, analogously to [RFC7252] where the Token and source/destination pair are used to match a response with a request, both endpoints MUST keep the association (Token, {Security Context, Partial IV of the request}), in order to be able to find the Security Context and compute the AAD to protect or verify the response. The association MAY be forgotten after it has been used to successfully protect or verify the response, with the exception of Observe processing, where the association MUST be kept as long as the Observation is active.
Given a CoAP request, the client SHALL perform the following steps to create an OSCORE request:
A server receiving a request containing the OSCORE option SHALL perform the following steps:
If Block-wise is supported, insert the following step before any other:
A. If Block-wise is present in the request then process the Outer Block options according to [RFC7959], until all blocks of the request have been received (see Section 4.1.3.4).
If a CoAP response is generated in response to an OSCORE request, the server SHALL perform the following steps to create an OSCORE response. Note that CoAP error responses derived from CoAP processing (step 8 in Section 8.2) are protected, as well as successful CoAP responses, while the OSCORE errors (steps 2, 3, and 6 in Section 8.2) do not follow the processing below, but are sent as simple CoAP responses, without OSCORE processing.
If Observe is supported, insert the following step between step 2 and 3 of Section 8.3:
A. If the response is an observe notification:
Then go to 4.
A client receiving a response containing the OSCORE option SHALL perform the following steps:
If Block-wise is supported, insert the following step before any other:
A. If Block-wise is present in the request then process the Outer Block options according to [RFC7959], until all blocks of the request have been received (see Section 4.1.3.4).
If Observe is supported:
Insert the following step between step 5 and step 6:
A. If the request was an Observe registration, then:
Replace step 8 of Section 8.4 with:
B. In case any of the previous erroneous conditions apply: the client SHALL stop processing the response. An error condition occurring while processing a response to an observation request does not cancel the observation. A client MUST NOT react to failure by re-registering the observation immediately.
The use of OSCORE MAY be indicated by a target attribute “osc” in a web link [RFC8288] to a resource, e.g. using a link-format document [RFC6690] if the resource is accessible over CoAP.
The “osc” attribute is a hint indicating that the destination of that link is only accessible using OSCORE, and unprotected access to it is not supported. Note that this is simply a hint, it does not include any security context material or any other information required to run OSCORE.
A value MUST NOT be given for the “osc” attribute; any present value MUST be ignored by parsers. The “osc” attribute MUST NOT appear more than once in a given link-value; occurrences after the first MUST be ignored by parsers.
The example in Figure 11 shows a use of the “osc” attribute: the client does resource discovery on a server, and gets back a list of resources, one of which includes the “osc” attribute indicating that the resource is protected with OSCORE. The link-format notation (see Section 5 of [RFC6690]) is used.
REQ: GET /.well-known/core RES: 2.05 Content </sensors/temp>;osc, </sensors/light>;if="sensor"
Figure 11: The web link
CoAP is designed for proxy operations (see Section 5.7 of [RFC7252]).
OSCORE is designed to work with OSCORE-unaware CoAP proxies. Security requirements for forwarding are listed in Section 2.2.1 of [I-D.hartke-core-e2e-security-reqs]. Proxy processing of the (Outer) Proxy-Uri option works as defined in [RFC7252]. Proxy processing of the (Outer) Block options works as defined in [RFC7959].
However, not all CoAP proxy operations are useful:
Optionally, a CoAP proxy MAY detect OSCORE and act accordingly. An OSCORE-aware CoAP proxy:
In the case of Observe (see Section 4.1.3.5) the OSCORE-aware CoAP proxy:
The CoAP request/response model may be mapped to HTTP and vice versa as described in Section 10 of [RFC7252]. The HTTP-CoAP mapping is further detailed in [RFC8075]. This section defines the components needed to map and transport OSCORE messages over HTTP hops. By mapping between HTTP and CoAP and by using cross-protocol proxies OSCORE may be used end-to-end between e.g. an HTTP client and a CoAP server. Examples are provided at the end of the section.
The HTTP OSCORE Header Field (see Section 13.4) is used for carrying the content of the CoAP OSCORE option when transporting OSCORE messages over HTTP hops.
The HTTP OSCORE header field is only used in POST requests and 200 (OK) responses. When used, the HTTP header field Content-Type is set to ‘application/oscore’ (see Section 13.5) indicating that the HTTP body of this message contains the OSCORE payload (see Section 6.2). No additional semantics is provided by other message fields.
Using the Augmented Backus-Naur Form (ABNF) notation of [RFC5234], including the following core ABNF syntax rules defined by that specification: ALPHA (letters) and DIGIT (decimal digits), the HTTP OSCORE header field value is as follows.
base64url-char = ALPHA / DIGIT / "-" / "_" OSCORE = 2*base64url-char
The HTTP OSCORE header field is not appropriate to list in the Connection header field (see Section 6.1 of [RFC7230]) since it is not hop-by-hop. OSCORE messages are generally not useful when served from cache (i.e., they will generally be marked Cache-Control: no-cache) and so interaction with Vary is not relevant (Section 7.1.4 of [RFC7231]). Since the HTTP OSCORE header field is critical for message processing, moving it from headers to trailers renders the message unusable in case trailers are ignored (see Section 4.1 of [RFC7230]).
Intermediaries are in general not allowed to insert, delete, or modify the OSCORE header. Changes to the HTTP OSCORE header field will in general violate the integrity of the OSCORE message resulting in an error. For the same reason the HTTP OSCORE header field is in general not preserved across redirects.
Since redirects are not defined in the mappings between HTTP and CoAP [RFC8075][RFC7252], a number of conditions need to be fulfilled for redirects to work. For CoAP client to HTTP server, such conditions include:
Since OSCORE requires HTTP body to be preserved across redirects, the HTTP server is recommended to reply with 307 or 308 instead of 301 or 302.
For the case of HTTP client to CoAP server, although redirect is not defined for CoAP servers [RFC7252], an HTTP client receiving a redirect should generate a new OSCORE request for the server it was redirected to.
Section 10.1 of [RFC7252] describes the fundamentals of the CoAP-to-HTTP cross-protocol mapping process. The additional rules for OSCORE messages are:
Section 10.2 of [RFC7252] and [RFC8075] specify the behavior of an HTTP-to-CoAP proxy. The additional rules for HTTP messages with the OSCORE header field are:
Restricted to subsets of HTTP and CoAP supporting a bijective mapping, OSCORE can be originated or terminated in HTTP endpoints.
The sending HTTP endpoint uses [RFC8075] to translate the HTTP message into a CoAP message. The CoAP message is then processed with OSCORE as defined in this document. The OSCORE message is then mapped to HTTP as described in Section 11.2 and sent in compliance with the rules in Section 11.1.
The receiving HTTP endpoint maps the HTTP message to a CoAP message using [RFC8075] and Section 11.3. The resulting OSCORE message is processed as defined in this document. If successful, the plaintext CoAP message is translated to HTTP for normal processing in the endpoint.
This section is giving an example of how a request and a response between an HTTP client and a CoAP server could look like. The example is not a test vector but intended as an illustration of how the message fields are translated in the different steps.
Mapping and notation here is based on “Simple Form” (Section 5.4.1 of [RFC8075]).
[HTTP request -- Before client object security processing] GET http://proxy.url/hc/?target_uri=coap://server.url/orders HTTP/1.1
[HTTP request -- HTTP Client to Proxy] POST http://proxy.url/hc/?target_uri=coap://server.url/ HTTP/1.1 Content-Type: application/oscore OSCORE: CSU Body: 09 07 01 13 61 f7 0f d2 97 b1 [binary]
[CoAP request -- Proxy to CoAP Server] POST coap://server.url/ OSCORE: 09 25 Payload: 09 07 01 13 61 f7 0f d2 97 b1 [binary]
[CoAP request -- After server object security processing] GET coap://server.url/orders
[CoAP response -- Before server object security processing] 2.05 Content Content-Format: 0 Payload: Exterminate! Exterminate!
[CoAP response -- CoAP Server to Proxy] 2.04 Changed OSCORE: [empty] Payload: 00 31 d1 fc f6 70 fb 0c 1d d5 ... [binary]
[HTTP response -- Proxy to HTTP Client] HTTP/1.1 200 OK Content-Type: application/oscore OSCORE: AA Body: 00 31 d1 fc f6 70 fb 0c 1d d5 ... [binary]
[HTTP response -- After client object security processing] HTTP/1.1 200 OK Content-Type: text/plain Body: Exterminate! Exterminate!
Note that the HTTP Status Code 200 in the next-to-last message is the mapping of CoAP Code 2.04 (Changed), whereas the HTTP Status Code 200 in the last message is the mapping of the CoAP Code 2.05 (Content), which was encrypted within the compressed COSE object carried in the Body of the HTTP response.
This section is giving an example of how a request and a response between a CoAP client and an HTTP server could look like. The example is not a test vector but intended as an illustration of how the message fields are translated in the different steps
[CoAP request -- Before client object security processing] GET coap://proxy.url/ Proxy-Uri=http://server.url/orders
[CoAP request -- CoAP Client to Proxy] POST coap://proxy.url/ Proxy-Uri=http://server.url/ OSCORE: 09 25 Payload: 09 07 01 13 61 f7 0f d2 97 b1 [binary]
[HTTP request -- Proxy to HTTP Server] POST http://server.url/ HTTP/1.1 Content-Type: application/oscore OSCORE: CSU Body: 09 07 01 13 61 f7 0f d2 97 b1 [binary]
[HTTP request -- After server object security processing] GET http://server.url/orders HTTP/1.1
[HTTP response -- Before server object security processing] HTTP/1.1 200 OK Content-Type: text/plain Body: Exterminate! Exterminate!
[HTTP response -- HTTP Server to Proxy] HTTP/1.1 200 OK Content-Type: application/oscore OSCORE: AA Body: 00 31 d1 fc f6 70 fb 0c 1d d5 ... [binary]
[CoAP response -- Proxy to CoAP Client] 2.04 Changed OSCORE: [empty] Payload: 00 31 d1 fc f6 70 fb 0c 1d d5 ... [binary]
[CoAP response -- After client object security processing] 2.05 Content Content-Format: 0 Payload: Exterminate! Exterminate!
Note that the HTTP Code 2.04 (Changed) in the next-to-last message is the mapping of HTTP Status Code 200, whereas the CoAP Code 2.05 (Content) in the last message is the value that was encrypted within the compressed COSE object carried in the Body of the HTTP response.
An overview of the security properties is given in Appendix D.
In scenarios with intermediary nodes such as proxies or gateways, transport layer security such as (D)TLS only protects data hop-by-hop. As a consequence, the intermediary nodes can read and modify any information. The trust model where all intermediary nodes are considered trustworthy is problematic, not only from a privacy perspective, but also from a security perspective, as the intermediaries are free to delete resources on sensors and falsify commands to actuators (such as “unlock door”, “start fire alarm”, “raise bridge”). Even in the rare cases where all the owners of the intermediary nodes are fully trusted, attacks and data breaches make such an architecture brittle.
(D)TLS protects hop-by-hop the entire message. OSCORE protects end-to-end all information that is not required for proxy operations (see Section 4). (D)TLS and OSCORE can be combined, thereby enabling end-to-end security of the message payload, in combination with hop-by-hop protection of the entire message, during transport between end-point and intermediary node. In particular when OSCORE is used with HTTP, the additional TLS protection of HTTP hops is recommended, e.g. between an HTTP endpoint and a proxy translating between HTTP and CoAP.
Applications need to consider that certain message fields and messages types are not protected end-to-end and may be spoofed or manipulated. The consequences of unprotected message fields are analyzed in Appendix D.4.
The use of COSE_Encrypt0 and AEAD to protect messages as specified in this document requires an established security context. The method to establish the security context described in Section 3.2 is based on a common Master Secret and unique Sender IDs. The necessary input parameters may be pre-established or obtained using a key establishment protocol augmented with establishment of Sender/Recipient ID such as the OSCORE profile of the ACE framework [I-D.ietf-ace-oscore-profile]. Such a procedure must ensure that the requirements of the security context parameters for the intended use are complied with (see Section 3.3) and also in error situations. It is recommended to use a key establishment protocol which provides forward secrecy whenever possible. Considerations for deploying OSCORE with a fixed Master Secret are given in Appendix B.
OSCORE uses HKDF [RFC5869] and the established input parameters to derive the security context. The required properties of the security context parameters are discussed in Section 3.3, in this section we focus on the Master Secret. HKDF denotes in this specification the composition of the expand and extract functions as defined in [RFC5869] and the Master Secret is used as Input Key Material (IKM).
Informally, HKDF takes as source an IKM containing some good amount of randomness but not necessarily distributed uniformly (or for which an attacker has some partial knowledge) and derive from it one or more cryptographically strong secret keys [RFC5869].
Therefore, the main requirement for the OSCORE Master Secret, in addition to being secret, is that it is has a good amount of randomness. The selected key establishment schemes must ensure that the necessary properties for the Master Secret are fulfilled. For pre-shared key deployments and key transport solutions such as [I-D.ietf-ace-oscore-profile], the Master Secret can be generated offline using a good random number generator.
Replay attacks need to be considered in different parts of the implementation. Most AEAD algorithms require a unique nonce for each message, for which the sender sequence numbers in the COSE message field ‘Partial IV’ is used. If the recipient accepts any sequence number larger than the one previously received, then the problem of sequence number synchronization is avoided. With reliable transport, it may be defined that only messages with sequence number which are equal to previous sequence number + 1 are accepted. An adversary may try to induce a device reboot for the purpose of replaying a message (see Section 7.5).
Note that sharing a security context between servers may open up for replay attacks, for example if the replay windows are not synchronized.
A verified OSCORE request enables the server to verify the identity of the entity who generated the message. However, it does not verify that the client is currently involved in the communication, since the message may be a delayed delivery of a previously generated request which now reaches the server. To verify the aliveness of the client the server may use the Echo option in the response to a request from the client (see [I-D.ietf-core-echo-request-tag]).
The maximum sender sequence number is dependent on the AEAD algorithm. The maximum sender sequence number is 2^40 - 1, or any algorithm specific lower limit, after which a new security context must be generated. The mechanism to build the nonce (Section 5.2) assumes that the nonce is at least 56 bits, and the Partial IV is at most 40 bits. The mandatory-to-implement AEAD algorithm AES-CCM-16-64-128 is selected for compatibility with CCM*.
In order to prevent cryptanalysis when the same plaintext is repeatedly encrypted by many different users with distinct keys, the nonce is formed by mixing the sequence number with a secret per-context initialization vector (Common IV) derived along with the keys (see Section 3.1 of [RFC8152]), and by using a Master Salt in the key derivation (see [MF00] for an overview). The Master Secret, Sender Key, Recipient Key, and Common IV must be secret, the rest of the parameters may be public. The Master Secret must have a good amount of randomness (see Section 12.3).
The Inner Block options enable the sender to split large messages into OSCORE-protected blocks such that the receiving endpoint can verify blocks before having received the complete message. The Outer Block options allow for arbitrary proxy fragmentation operations that cannot be verified by the endpoints, but can by policy be restricted in size since the Inner Block options allow for secure fragmentation of very large messages. A maximum message size (above which the sending endpoint fragments the message and the receiving endpoint discards the message, if complying to the policy) may be obtained as part of normal resource discovery.
Privacy threats executed through intermediary nodes are considerably reduced by means of OSCORE. End-to-end integrity protection and encryption of the message payload and all options that are not used for proxy operations, provide mitigation against attacks on sensor and actuator communication, which may have a direct impact on the personal sphere.
The unprotected options (Figure 5) may reveal privacy sensitive information, see Appendix D.4. CoAP headers sent in plaintext allow, for example, matching of CON and ACK (CoAP Message Identifier), matching of request and responses (Token) and traffic analysis. OSCORE does not provide protection for HTTP header fields which are not both CoAP-mappable and class E. The HTTP message fields which are visible to on-path entity are only used for the purpose of transporting the OSCORE message, whereas the application layer message is encoded in CoAP and encrypted.
COSE message fields, i.e. the OSCORE option, may reveal information about the communicating endpoints. E.g. ‘kid’ and ‘kid context’, which are intended to help the server find the right context, may reveal information about the client. Tracking ‘kid’ and ‘kid context’ to one server may be used for correlating requests from one client.
Unprotected error messages reveal information about the security state in the communication between the endpoints. Unprotected signaling messages reveal information about the reliable transport used on a leg of the path. Using the mechanisms described in Section 7.5 may reveal when a device goes through a reboot. This can be mitigated by the device storing the precise state of sender sequence number and replay window on a clean shutdown.
The length of message fields can reveal information about the message. Applications may use a padding scheme to protect against traffic analysis.
Note to RFC Editor: Please replace all occurrences of “[[this document]]” with the RFC number of this specification.
Note to IANA: Please note all occurrences of “TBDx” in this specification should be assigned the same number.
The ‘kid context’ parameter is added to the “COSE Header Parameters Registry”:
Note to IANA: Label assignment in (Integer value between 1 and 255) is requested. (RFC Editor: Delete this note after IANA assignment)
The OSCORE option is added to the CoAP Option Numbers registry:
+--------+-----------------+-------------------+ | Number | Name | Reference | +--------+-----------------+-------------------+ | TBD1 | OSCORE | [[this document]] | +--------+-----------------+-------------------+
The OSCORE option is added to the CoAP Signaling Option Numbers registry:
+------------+--------+---------------------+-------------------+ | Applies to | Number | Name | Reference | +------------+--------+---------------------+-------------------+ | 7.xx (any) | TBD1 | OSCORE | [[this document]] | +------------+--------+---------------------+-------------------+
The HTTP OSCORE header field is added to the Message Headers registry:
+----------------------+----------+----------+-------------------+ | Header Field Name | Protocol | Status | Reference | +----------------------+----------+----------+-------------------+ | OSCORE | http | standard | [[this document]] | +----------------------+----------+----------+-------------------+
This section registers the ‘application/oscore’ media type in the “Media Types” registry. These media types are used to indicate that the content is an OSCORE message. The OSCORE body cannot be understood without the OSCORE header field value and the security context.
Type name: application Subtype name: oscore Required parameters: N/A Optional parameters: N/A Encoding considerations: binary Security considerations: See the Security Considerations section of [[This document]]. Interoperability considerations: N/A Published specification: [[This document]] Applications that use this media type: IoT applications sending security content over HTTP(S) transports. Fragment identifier considerations: N/A Additional information: * Deprecated alias names for this type: N/A * Magic number(s): N/A * File extension(s): N/A * Macintosh file type code(s): N/A Person & email address to contact for further information: iesg@ietf.org Intended usage: COMMON Restrictions on usage: N/A Author: Göran Selander, goran.selander@ericsson.com Change Controller: IESG Provisional registration? No
Note to IANA: ID assignment in the 10000-64999 range is requested. (RFC Editor: Delete this note after IANA assignment)
This section registers the media type ‘application/oscore’ media type in the “CoAP Content-Format” registry. This Content-Format for the OSCORE payload is defined for potential future use cases and SHALL NOT be used in the OSCORE message. The OSCORE payload cannot be understood without the OSCORE option value and the security context.
+----------------------+----------+----------+-------------------+ | Media Type | Encoding | ID | Reference | +----------------------+----------+----------+-------------------+ | application/oscore | | TBD3 | [[this document]] | +----------------------+----------+----------+-------------------+
It is requested that IANA create a new registry entitled “OSCORE Octet”. The registry should be created with the Expert Review policy. Guidelines for the experts are provided in Section 13.8.
The columns of the registry are:
The initial contents of the registry can be found in Figure 12. The specification column for all rows in that table should be this document. Additionally, the entry with Bit Position of 0 is to be marked as ‘Reserved’. This entry is going to be specified in a future document, and will be used to expand the OSCORE Octet in Section 6.1, so that entries 8-63 of the registry are defined.
+--------------+-------------+---------------------+-------------------+ | Bit Position | Name | Description | Specification | +--------------+-------------+---------------------+-------------------+ | 0 | Reserved | | | +--------------+-------------+---------------------+-------------------+ | 3 | Kid Context | Set to 1 if kid | [[this document]] | | | Flag | context is present | | | | | in the compressed | | | | | COSE object | | +--------------+-------------+---------------------+-------------------+ | 4 | Kid Flag | Set to 1 if kid is | [[this document]] | | | | present in the com- | | | | | pressed COSE object | | +--------------+-------------+---------------------+-------------------+ | 5-7 | Partial IV | Encodes the Partial | [[this document]] | | | Length | IV length; can have | | | | | value 0 to 5 | | +--------------+-------------+---------------------+-------------------+
Figure 12
The expert reviewers for the registry defined in this document are expected to ensure that the usage solves a valid use case that could hardly be solved in a different way, that it is not going to duplicate one that is already registered, and that the registered point is likely to be used in deployments. They are furthermore expected to check the clarity of purpose and use of the requested code points. Experts should take into account the expected usage of entries when approving point assignment, and the length of the encoded value should be weighed against the number of code points left that encode to that size and the size of device it will be used on. Experts should block registration for entries 8-63 until these points are defined (i.e. until the mechanism for the OSCORE Octet expansion via bit 0 is specified).
This section gives examples of OSCORE, targeting scenarios in Section 2.2.1.1 of [I-D.hartke-core-e2e-security-reqs]. The message exchanges are made, based on the assumption that there is a security context established between client and server. For simplicity, these examples only indicate the content of the messages without going into detail of the (compressed) COSE message format.
This example illustrates a client requesting the alarm status from a server.
Client Proxy Server
| | |
+------>| | Code: 0.02 (POST)
| POST | | Token: 0x8c
| | | OSCORE: [kid:5f,Partial IV:42]
| | | Payload: {Code:0.01,
| | | Uri-Path:"alarm_status"}
| | |
| +------>| Code: 0.02 (POST)
| | POST | Token: 0x7b
| | | OSCORE: [kid:5f,Partial IV:42]
| | | Payload: {Code:0.01,
| | | Uri-Path:"alarm_status"}
| | |
| |<------+ Code: 2.04 (Changed)
| | 2.04 | Token: 0x7b
| | | OSCORE: -
| | | Payload: {Code:2.05, "0"}
| | |
|<------+ | Code: 2.04 (Changed)
| 2.04 | | Token: 0x8c
| | | OSCORE: -
| | | Payload: {Code:2.05, "0"}
| | |
Figure 13: Secure Access to Sensor. Square brackets [ ... ] indicate content of compressed COSE object. Curly brackets { ... } indicate encrypted data.
The request/response Codes are encrypted by OSCORE and only dummy Codes (POST/Changed) are visible in the header of the OSCORE message. The option Uri-Path (“alarm_status”) and payload (“0”) are encrypted.
The COSE header of the request contains an identifier (5f), indicating which security context was used to protect the message and a Partial IV (42).
The server verifies the request as specified in Section 8.2. The client verifies the response as specified in Section 8.4.
This example illustrates a client requesting subscription to a blood sugar measurement resource (GET /glucose), first receiving the value 220 mg/dl and then a second value 180 mg/dl.
Client Proxy Server
| | |
+------>| | Code: 0.05 (FETCH)
| FETCH | | Token: 0x83
| | | Observe: 0
| | | OSCORE: [kid:ca,Partial IV:15]
| | | Payload: {Code:0.01,
| | | Uri-Path:"glucose"}
| | |
| +------>| Code: 0.05 (FETCH)
| | FETCH | Token: 0xbe
| | | Observe: 0
| | | OSCORE: [kid:ca,Partial IV:15]
| | | Payload: {Code:0.01,
| | | Uri-Path:"glucose"}
| | |
| |<------+ Code: 2.05 (Content)
| | 2.05 | Token: 0xbe
| | | Observe: 7
| | | OSCORE: [Partial IV:32]
| | | Payload: {Code:2.05,
| | | Content-Format:0, "220"}
| | |
|<------+ | Code: 2.05 (Content)
| 2.05 | | Token: 0x83
| | | Observe: 7
| | | OSCORE: [Partial IV:32]
| | | Payload: {Code:2.05,
| | | Content-Format:0, "220"}
... ... ...
| | |
| |<------+ Code: 2.05 (Content)
| | 2.05 | Token: 0xbe
| | | Observe: 8
| | | OSCORE: [Partial IV:36]
| | | Payload: {Code:2.05,
| | | Content-Format:0, "180"}
| | |
|<------+ | Code: 2.05 (Content)
| 2.05 | | Token: 0x83
| | | Observe: 8
| | | OSCORE: [Partial IV:36]
| | | Payload: {Code:2.05,
| | | Content-Format:0, "180"}
| | |
Figure 14: Secure Subscribe to Sensor. Square brackets [ ... ] indicate content of compressed COSE object header. Curly brackets { ... } indicate encrypted data.
The dummy Codes (FETCH/Content) are used to allow forwarding of Observe messages. The options Content-Format (0) and the payload (“220” and “180”), are encrypted.
The COSE header of the request contains an identifier (ca), indicating the security context used to protect the message and a Partial IV (15). The COSE headers of the responses contains Partial IVs (32 and 36).
The server verifies that the Partial IV has not been received before. The client verifies that the responses are bound to the request and that the Partial IVs are greater than any Partial IV previously received in a response bound to the request.
Two examples complying with the requirements on the security context parameters (Section 3.3) are given in this section.
An application may derive a security context once and use it for the lifetime of a device. For many IoT deployments, a 128 bit uniformly random Master Key is sufficient for encrypting all data exchanged with the IoT device. This specification describes techniques for persistent storage of the security context and synchronization of sequence numbers (see Section 7.5) to ensure that security is maintained with the existing security context.
Section 12.2 recommends the use of a key establishment protocol providing forward secrecy of the Master Secret.
An application which does not require forward secrecy may allow multiple security contexts to be derived from one Master Secret. The requirements on the security context parameters must be fulfilled (Section 3.3) even if the client or server is rebooted, recommissioned or in error cases.
This section gives an example of an application allowing new security contexts to be derived from input parameters pre-established between client and server for this purpose: in particular Master Secret, Master Salt and Sender/Recipient ID (see Section 3.2):
As an alternative procedure to reduce the subsequent overhead in requests due to kid context, the verification of a message with a new ID Context may trigger the server to generate a new kid to replace the Client Sender ID in future requests. A client may e.g. indicate support for such a procedure by requesting a special well-known URI and receive the new kid in the response, which together with the input parameters and the ID context is used to derive the new security context which may be identified only by its kid. The details are out of scope for this specification.
The procedures may be complemented with the use of the Echo option for verifying the aliveness of the client requesting a new security context.
This appendix includes the test vectors for different examples of CoAP messages using OSCORE. Given a set of inputs, OSCORE defines how to set up the Security Context in both the client and the server.
In this test vector, a Master Salt of 8 bytes is used. The default values are used for AEAD Algorithm and KDF.
Inputs:
From the previous parameters,
Outputs:
From the previous parameters and a Partial IV equal to 0 (both for sender and recipient):
Inputs:
From the previous parameters,
Outputs:
From the previous parameters and a Partial IV equal to 0 (both for sender and recipient):
In this test vector, the default values are used for AEAD Algorithm, KDF, and Master Salt.
Inputs:
From the previous parameters,
Outputs:
From the previous parameters and a Partial IV equal to 0 (both for sender and recipient):
Inputs:
From the previous parameters,
Outputs:
From the previous parameters and a Partial IV equal to 0 (both for sender and recipient):
In this test vector, a Master Salt of 8 bytes and a ID Context of 8 bytes are used. The default values are used for AEAD Algorithm and KDF.
Inputs:
From the previous parameters,
Outputs:
From the previous parameters and a Partial IV equal to 0 (both for sender and recipient):
Inputs:
From the previous parameters,
Outputs:
From the previous parameters and a Partial IV equal to 0 (both for sender and recipient):
This section contains a test vector for an OSCORE protected CoAP GET request using the security context derived in Appendix C.1. The unprotected request only contains the Uri-Path and Uri-Host options.
Unprotected CoAP request: 0x44015d1f00003974396c6f63616c686f737483747631 (22 bytes)
Common Context:
Sender Context:
The following COSE and cryptographic parameters are derived:
From the previous parameter, the following is derived:
From there:
This section contains a test vector for an OSCORE protected CoAP GET request using the security context derived in Appendix C.2. The unprotected request only contains the Uri-Path and Uri-Host options.
Unprotected CoAP request: 0x440171c30000b932396c6f63616c686f737483747631 (22 bytes)
Common Context:
Sender Context:
The following COSE and cryptographic parameters are derived:
From the previous parameter, the following is derived:
From there:
This section contains a test vector for an OSCORE protected CoAP GET request carrying the ID Context in the message, using the security context derived in Appendix C.3. The unprotected request only contains the Uri-Path and Uri-Host options.
Unprotected CoAP request: 0x44012f8eef9bbf7a396c6f63616c686f737483747631 (22 bytes)
Common Context:
Sender Context:
The following COSE and cryptographic parameters are derived:
From the previous parameter, the following is derived:
From there:
This section contains a test vector for an OSCORE protected 2.05 Content response to the request in Appendix C.4. The unprotected response has payload “Hello World!” and no options. The protected response does not contain a kid nor a Partial IV. Note that some parameters are derived from the request.
Unprotected CoAP response: 0x64455d1f00003974ff48656c6c6f20576f726c6421 (21 bytes)
Common Context:
Sender Context:
The following COSE and cryptographic parameters are derived:
From the previous parameter, the following is derived:
From there:
This section contains a test vector for an OSCORE protected 2.05 Content response to the request in Appendix C.4. The unprotected response has payload “Hello World!” and no options. The protected response does not contain a kid, but contains a Partial IV. Note that some parameters are derived from the request.
Unprotected CoAP response: 0x64455d1f00003974ff48656c6c6f20576f726c6421 (21 bytes)
Common Context:
Sender Context:
The following COSE and cryptographic parameters are derived:
From the previous parameter, the following is derived:
From there:
CoAP is designed to work with intermediaries reading and/or changing CoAP message fields to perform supporting operations in constrained environments, e.g. forwarding and cross-protocol translations.
Securing CoAP on transport layer protects the entire message between the endpoints in which case CoAP proxy operations are not possible. In order to enable proxy operations, security on transport layer needs to be terminated at the proxy in which case the CoAP message in its entirety is unprotected in the proxy.
Requirements for CoAP end-to-end security are specified in [I-D.hartke-core-e2e-security-reqs]. The client and server are assumed to be honest, but proxies and gateways are only trusted to perform their intended operations. Forwarding is specified in Section 2.2.1 of [I-D.hartke-core-e2e-security-reqs]. HTTP-CoAP translation is specified in [RFC8075]. Intermediaries translating between different transport layers are intended to perform just that.
By working at the CoAP layer, OSCORE enables different CoAP message fields to be protected differently, which allows message fields required for proxy operations to be available to the proxy while message fields intended for the other endpoint remain protected. In the remainder of this section we analyze how OSCORE protects the protected message fields and the consequences of message fields intended for proxy operation being unprotected.
Protected message fields are included in the Plaintext (Section 5.3) and the Additional Authenticated Data (Section 5.4) of the COSE_Encrypt0 object and encrypted using an AEAD algorithm.
OSCORE depends on a pre-established random Master Secret (Section 12.3) used to derive encryption keys, and a construction for making (key, nonce) pairs unique (Appendix D.3). Assuming this is true, and the keys are used for no more data than indicated in Section 7.2.1, OSCORE should provide the following guarantees:
In the above, the attacker is anyone except the endpoints, e.g. a compromised intermediary. Informally, OSCORE provides these properties by AEAD-protecting the plaintext with a strong key and uniqueness of (key, nonce) pairs. AEAD encryption [RFC5116] provides confidentiality and integrity for the data. Response-request binding is provided by including the kid and Partial IV of the request in the AAD of the response. Non-replayability of requests and notifications is provided by using unique (key, nonce) pairs and a replay protection mechanism (application dependent, see Section 7.4).
OSCORE is susceptible to a variety of traffic analysis attacks based on observing the length and timing of encrypted packets. OSCORE does not provide any specific defenses against this form of attack but the application may use a padding mechanism to prevent an attacker from directly determine the length of the padding. However, information about padding may still be revealed by side-channel attacks observing differences in timing.
In this section we show that (key, nonce) pairs are unique as long as the requirements in Sections 3.3 and 7.2.1 are followed.
Fix a Common Context (Section 3.1) and an endpoint, called the encrypting endpoint. An endpoint may alternate between client and server roles, but each endpoint always encrypts with the Sender Key of its Sender Context. Sender Keys are (stochastically) unique since they are derived with HKDF using unique Sender IDs, so messages encrypted by different endpoints use different keys. It remains to prove that the nonces used by the fixed endpoint are unique.
Since the Common IV is fixed, the nonces are determined by a Partial IV (PIV) and the Sender ID of the endpoint generating that Partial IV (ID_PIV). The nonce construction (Section 5.2) with the size of the ID_PIV (S) creates unique nonces for different (ID_PIV, PIV) pairs. There are two cases:
A. For requests, and responses with Partial IV (e.g. Observe notifications):
Since the encrypting endpoint steps the Partial IV for each use, the nonces used in case A are all unique as long as the number of encrypted messages is kept within the required range (Section 7.2.1).
B. For responses without Partial IV (e.g. single response to a request):
Since the Sender IDs are unique, ID_PIV is different from the Sender ID of the encrypting endpoint. Therefore, the nonces in case B are different compared to nonces in case A, where the encrypting endpoint generated the Partial IV. Since the Partial IV of the request is verified for replay (Section 7.4) associated to this Recipient Context, PIV is unique for this ID_PIV, which makes all nonces in case B distinct.
This section lists and discusses issues with unprotected message fields.
Error messages occurring during CoAP processing are protected end-to-end. Error messages occurring during OSCORE processing are not always possible to protect, e.g. if the receiving endpoint cannot locate the right security context. For this setting, unprotected error messages are allowed as specified to prevent extensive retransmissions. Those error messages can be spoofed or manipulated, which is a potential denial-of-service attack.
Signaling messages used in CoAP over TCP [RFC8323] are intended to be hop-by-hop; spoofing signaling messages can be used as a denial-of-service attack of a TCP connection.
In contrast to CoAP, where OSCORE does not protect header fields to enable CoAP-CoAP proxy operations, the use of OSCORE with HTTP is restricted to transporting a protected CoAP message over an HTTP hop. Any unprotected HTTP message fields may reveal information about the transport of the OSCORE message and enable various denial-of-service attacks. It is recommended to additionally use TLS [RFC5246] for HTTP hops, which enables encryption and integrity protection of headers, but still leaves some information for traffic analysis.
Data structure definitions in the present specification employ the CDDL language for conciseness and precision. CDDL is defined in [I-D.ietf-cbor-cddl], which at the time of writing this appendix is in the process of completion. As the document is not yet available for a normative reference, the present appendix defines the small subset of CDDL that is being used in the present specification.
Within the subset being used here, a CDDL rule is of the form name = type, where name is the name given to the type. A type can be one of:
The following individuals provided input to this document: Christian Amsüss, Tobias Andersson, Carsten Bormann, Joakim Brorsson, Esko Dijk, Thomas Fossati, Martin Gunnarsson, Klaus Hartke, Michael Richardson, Jim Schaad, Peter van der Stok, Dave Thaler, Marco Tiloca, William Vignat, and Mališa Vucinic.
Ludwig Seitz and Göran Selander worked on this document as part of the CelticPlus project CyberWI, with funding from Vinnova.