More Modular Exponential (MODP) Diffie-Hellman (DH) Key Exchange (KEX) Groups for Secure Shell (SSH)
draft-ietf-curdle-ssh-modp-dh-sha2-06

Abstract

This document defines added Modular Exponential (MODP) Groups for the Secure Shell (SSH) protocol using SHA-2 hashes. This document updates RFC 4250. This document updates RFC 4253.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on December 23, 2017.

Copyright Notice

Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.

1. Overview and Rationale

Secure Shell (SSH) is a common protocol for secure communication on the Internet. Due to recent security concerns with SHA-1 [RFC6194] and with MODP groups with less than 2048 bits [NIST-SP-800-131Ar1] implementer and users request support for larger Diffie Hellman (DH) MODP group sizes with data integrity verification using the SHA-2 family of secure hash algorithms as well as MODP groups providing more security.

DH primes being adopted by this document are all "safe primes" such that p = 2q + 1 where q is also a prime. New MODP groups are being introduced starting with the MODP 3072-bit group 15 all use SHA512 as the hash algorithm.

The DH 2048-bit MODP group 14 is already present in most SSH implementations and most implementations already have a SHA256 implementation, so diffie-hellman-group14-sha256 is provided as easy to implement.

It is intended that these new MODP groups with SHA-2 based hashes update the [RFC4253] section 6.4 and [RFC4250] section 4.10 standards.

The United States Information Assurance Directorate (IAD) at the National Security Agency (NSA) has published "Commercial National Security Algorithm (CNSA) Suite and Quantum Computing Frequently Asked Questions (FAQ)" [MFQ-U-OO-815099-15] addressed to organizations that run classified or unclassified national security systems (NSS) and vendors that build products used in NSS.

This FAQ document indicates that NSS should no longer use:

• ECDH and ECDSA with NIST P-256
• SHA-256
• AES-128
• RSA with 2048-bit keys
• Diffie-Hellman with 2048-bit keys

The FAQ also states that NSS users should select DH groups based upon well established and validated parameter sets that comply with the minimum required sizes. Some specific examples include:

• Elliptic Curves are currently restricted to the NIST P-384 group only for both ECDH and ECDSA, in accordance with existing NIST and NIAP standards.
• RSA moduli should have a minimum size of 3072 bits (other than the noted PKI exception), and keys should be generated in accordance with all relevant NIST standards.
• For Diffie-Hellman use a Diffie-Hellman prime modulus of at least 3072 bits as specified in IETF RFC 3526 (Groups 15-18).

Although SSH may not always be used to protect Top Secret communications, this document adopts the use of the DH groups provided as an example in the FAQ as well as the use of SHA512 rather than SHA256 for the new DH groups.

[TO BE REMOVED: Please send comments on this draft to curdle@ietf.org.]

2. Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.

3. Key Exchange Algorithms

This memo adopts the style and conventions of [RFC4253] in specifying how the use of new data key exchange is indicated in SSH.

The following new key exchange algorithms are defined:

Key Exchange Method Name
diffie-hellman-group14-sha256
diffie-hellman-group15-sha512
diffie-hellman-group16-sha512
diffie-hellman-group17-sha512
diffie-hellman-group18-sha512
       

Figure 1

The SHA-2 family of secure hash algorithms are defined in [RFC6234].

The method of key exchange used for the name "diffie-hellman-group14-sha256" is the same as that for "diffie-hellman-group14-sha1" except that the SHA256 hash algorithm is used. It is recommended that diffie-hellman-group14-sha256 SHOULD be supported to smooth the transition to newer group sizes.

The group15 through group18 names are the same as those specified in [RFC3526] 3072-bit MODP Group 15, 4096-bit MODP Group 16, 6144-bit MODP Group 17, and 8192-bit MODP Group 18.

The SHA512 algorithm is to be used when "sha512" is specified as a part of the key exchange method name.

4. IANA Considerations

This document augments the Key Exchange Method Names in [RFC4253] and [RFC4250].

IANA is requested to add to the Key Exchange Method Names algorithm registry [IANA-KEX] with the following entries:

[TO BE REMOVED: This registration should take place at the following location: <http://www.iana.org/assignments/ssh-parameters/ssh-parameters.xhtml#ssh-parameters-16>]

5. Security Considerations

The security considerations of [RFC4253] apply to this document.

The security considerations of [RFC3526] suggest that MODP group14 through group18 have security strengths that range between 110 bits of security through 310 bits of security. They are based on [RFC3766] Determining Strengths For Public Keys Used For Exchanging Symmetric Keys. Care should be taken to use sufficient entropy and/or DRBG algorithms to maximize the true security strength of the key exchange and ciphers selected.

Using a fixed set of Diffie-Hellman parameters makes them a high value target for pre-computation. Generating additional sets of primes to be used, or moving to larger values is a mitigation against this issue.

6. References

6.1. Normative References

6.2. Informative References

Author's Address

Table of Contents

• 1. Overview and Rationale
• 2. Requirements Language
• 3. Key Exchange Algorithms
• 4. IANA Considerations
• 5. Security Considerations
• 6. References
• 6.1. Normative References
• 6.2. Informative References
• Author's Address