DNS over DTLS (DNSoD)
draft-ietf-dprive-dnsodtls-05

Abstract

DNS queries and responses are visible to network elements on the path between the DNS client and its server. These queries and responses can contain privacy-sensitive information which is valuable to protect. An active attacker can send bogus responses causing misdirection of the subsequent connection.

To counter passive listening and active attacks, this document proposes the use of Datagram Transport Layer Security (DTLS) for DNS, to protect against passive listeners and certain active attacks. As DNS needs to remain fast, this proposal also discusses mechanisms to reduce DTLS round trips and reduce DTLS handshake size. The proposed mechanism runs over port 853.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on September 16, 2016.

Copyright Notice

Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

• 1. Introduction
• 1.1. Relationship to TCP Queries and to DNSSEC
• 2. Terminology
• 3. DTLS session initiation, Polling and Discovery
• 4. Performance Considerations
• 5. Established sessions
• 6. Anycast
• 7. Downgrade attacks
• 8. IANA Considerations
• 9. Security Considerations
• 9.1. Authenticating a DNS Privacy Server
• 10. Acknowledgements
• 11. References
• 11.1. Normative References
• 11.2. Informative References
• Authors' Addresses

1. Introduction

The Domain Name System is specified in [RFC1034] and [RFC1035]. DNS queries and responses are normally exchanged unencrypted and are thus vulnerable to eavesdropping. Such eavesdropping can result in an undesired entity learning domains that a host wishes to access, thus resulting in privacy leakage. DNS privacy problem is further discussed in [RFC7626].

Active attackers have long been successful at injecting bogus responses, causing cache poisoning and causing misdirection of the subsequent connection (if attacking A or AAAA records). A popular mitigation against that attack is to use ephemeral and random source ports for DNS queries [RFC5452].

This document defines DNS over DTLS (DNSoD, pronounced "dee-enn-sod") which provides confidential DNS communication between stub resolvers and recursive resolvers, stub resolvers and forwarders, forwarders and recursive resolvers.

The motivations for proposing DNSoD are that

• TCP suffers from network head-of-line blocking, where the loss of a packet causes all other TCP segments to not be delivered to the application until the lost packet is re-transmitted. DNSoD, because it uses UDP, does not suffer from network head-of-line blocking.
• DTLS session resumption consumes 1 round trip whereas TLS session resumption can start only after TCP handshake is complete. Although TCP Fast Open [RFC7413] can reduce that handshake, TCP Fast Open is not yet available in commercially-popular operating systems.

1.1. Relationship to TCP Queries and to DNSSEC

DNS queries can be sent over UDP or TCP. The scope of this document, however, is only UDP. DNS over TCP could be protected with TLS, as described in [I-D.ietf-dprive-dns-over-tls].

DNS Security Extensions (DNSSEC [RFC4033]) provides object integrity of DNS resource records, allowing end-users (or their resolver) to verify legitimacy of responses. However, DNSSEC does not protect privacy of DNS requests or responses. DNSoD works in conjunction with DNSSEC, but DNSoD does not replace the need or value of DNSSEC.

2. Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

3. DTLS session initiation, Polling and Discovery

DNSoD MUST run over standard UDP port 853 as defined in Section 8. A DNS server that supports DNSoD MUST listen for and accept DTLS packets on a designated port 853.

The host should determine if the DNS server supports DNSoD by sending a DTLS ClientHello message. A DNS server that does not support DNSoD will not respond to ClientHello messages sent by the client. The client MUST use timer values defined in Section 4.2.4.1 of [RFC6347] for retransmission of ClientHello message and if no response is received from the DNS server. After 15 seconds, it MUST cease attempts to re-transmit its ClientHello. The client MAY repeat that procedure in the event the DNS server has been upgraded to support DNSoD, but such probing SHOULD NOT be done more frequently than every 24 hours and MUST NOT be done more frequently than every 15 minutes. This mechanism requires no additional signaling between the client and server.

4. Performance Considerations

To reduce number of octets of the DTLS handshake, especially the size of the certificate in the ServerHello (which can be several kilobytes), DNS client and server can use raw public keys [RFC7250] or Cached Information Extension [I-D.ietf-tls-cached-info]. Cached Information Extension avoids transmitting the server's certificate and certificate chain if the client has cached that information from a previous TLS handshake.

Multiple DNS queries can be sent over a single DTLS session and the DNSoD client need not wait for an outstanding reply before sending the next query. The existing Query ID, Query type and Query class allows multiple requests and responses to be interleaved in whatever order they can be fulfilled by the DNS server. This means DNSoD reduces the consumption of UDP port numbers, and because DTLS protects the communication between a DNS client and its server, the resolver SHOULD NOT use random ephemeral source ports (Section 9.2 of [RFC5452]) because such source port use would incur additional, unnecessary DTLS load on the DNSoD server. When sending multiple queries over a single DTLS session, clients MUST take care to avoid Message ID collisions. In other words, they MUST NOT re-use the DNS Message ID of an in-flight query.

It is highly advantageous to avoid server-side DTLS state and reduce the number of new DTLS sessions on the server which can be done with [RFC5077]. This also eliminates a round-trip for subsequent DNSoD queries, because with [RFC5077] the DTLS session does not need to be re-established.

Compared to normal DNS, DTLS adds at least 13 octets of header, plus cipher and authentication overhead to every query and every response. This reduces the size of the DNS payload that can be carried. DNS client and server MUST support the EDNS0 option defined in [RFC6891] so that the DNS client can indicate to the DNS server the maximum DNS response size it can handle without IP fragmentation. If the DNS server's response exceeds the EDNS0 value, the DNS server sets the TC (truncated) bit. On receiving a response with the TC bit set, the client establishes a DNS-over-TLS connection to the same server, and sends a new DNS request for the same resource record

DNSoD puts an additional computational load on servers. The largest gain for privacy is to protect the communication between the DNS client (the end user's machine) and its caching resolver.

5. Established sessions

In DTLS, all data is protected using the same record encoding and mechanisms. When the mechanism described in this document is in effect, DNS messages are encrypted using the standard DTLS record encoding. When a user of DTLS wishes to send an DNS message, it delivers it to the DTLS implementation as an ordinary application data write (e.g., SSL_write()). To reduce client and server workload, clients SHOULD re-use the DTLS session. A single DTLS session can be used to send multiple DNS requests and receive multiple DNS responses.

DNSoD client and server can use DTLS heartbeat [RFC6520] to verify that the peer still has DTLS state. DTLS session is terminated by the receipt of an authenticated message that closes the connection (e.g., a DTLS fatal alert).

   Client                                          Server
   ------                                          ------

   ClientHello             -------->  
                         

                           <-------    HelloVerifyRequest  
                                         (contains cookie)    

   ClientHello             -------->     
   (contains cookie)                      
   (empty SessionTicket extension)
                                              ServerHello  
                                  (empty SessionTicket extension)  
                                             Certificate*    
                                       ServerKeyExchange*      
                                      CertificateRequest*     
                           <--------      ServerHelloDone    

   Certificate*                                             
   ClientKeyExchange                                          
   CertificateVerify*                                          
   [ChangeCipherSpec]                                         
   Finished                -------->                         
                                         NewSessionTicket
                                       [ChangeCipherSpec]    
                           <--------             Finished    

  
   DNS Request             --------->

                           <---------  DNS Response

Message Flow for Full Handshake Issuing New Session Ticket

6. Anycast

DNS servers are often configured with anycast addresses. While the network is stable, packets transmitted from a particular source to an anycast address will reach the same server that has the cryptographic context from the DNS over DTLS handshake. But when the network configuration changes, a DNS over DTLS packet can be received by a server that does not have the necessary cryptographic context. To encourage the client to initiate a new DTLS handshake, DNS servers SHOULD generate a DTLS Alert message in response to receiving a DTLS packet for which the server does not have any cryptographic context. Upon receipt of an un-authenicated DTLS alert, the DTLS client validates the Alert is within the replay window (Section 4.1.2.6 of [RFC6347]). It is difficult for the DTLS client to validate the DTLS alert was generated by the DTLS server in response to a request or was generated by an on- or off-path attacker. Thus, upon receipt of an in-window DTLS Alert, the client SHOULD continue re-transmitting the DTLS packet (in the event the Alert was spoofed), and at the same time it SHOULD initiate DTLS session resumption.

7. Downgrade attacks

Using DNS privacy with an authenticated server is most preferred, DNS privacy with an unauthenticated server is next preferred, and plain DNS is least preferred. This section gives a non-normative discussion on common behaviors and choices.

An implementation MAY attempt to obtain DNS privacy by contacting DNS servers on the local network (provided by DHCP) and on the Internet, and make those attempts in parallel to reduce user impact. If DNS privacy cannot be successfully negotiated for whatever reason, the client can do three things:

1. refuse to send DNS queries on this network, which means the client cannot make effective use of this network, as modern networks require DNS; or,
2. use opportunistic security, as described in [RFC7435]. or,
3. send plain DNS queries on this network, which means no DNS privacy is provided.

Heuristics can improve this situation, but only to a degree (e.g., previous success of DNS privacy on this network may be reason to alert the user about failure to establish DNS privacy on this network now). Still, the client (in cooperation with the end user) has to decide to use the network without the protection of DNS privacy.

8. IANA Considerations

IANA is requested to add the following value to the "Service Name and Transport Protocol Port Number Registry" registry in the System Range. The registry for that range requires IETF Review or IESG Approval [RFC6335] and such a review has been requested using the Early Allocation process [RFC7120] for the well-known UDP port in this document.

    Service Name            domain-s
    Transport Protocol(s)   UDP/TCP
    Port                    853
    Assignee                IESG
    Contact                 dwing@cisco.com
    Description             DNS query-response protocol runs over 
                            DTLS and TLS
    Reference               This document
      

9. Security Considerations

The interaction between a DNS client and DNS server requires Datagram Transport Layer Security (DTLS) with a ciphersuite offering confidentiality protection and guidance given in [RFC7525] must be followed to avoid attacks on DTLS. DNS clients keeping track of servers known to support DTLS enables clients to detect downgrade attacks. For servers with no connection history and no apparent support for DTLS, depending on their Privacy Profile and privacy requirements, clients may choose to (a) try another server when available, (b) continue without DTLS, or (c) refuse to forward the query. Once a DNSoD client has established a security association with a particular DNS server, and outstanding normal DNS queries with that server (if any) have been received, the DNSoD client MUST ignore any subsequent normal DNS responses from that server, as all subsequent responses should be encrypted. This behavior mitigates all possible attacks described in Measures for Making DNS More Resilient against Forged Answers [RFC5452].

A malicious client might attempt to perform a high number of DTLS handshakes with a server. As the clients are not uniquely identified by the protocol and can be obfuscated with IPv4 address sharing and with IPv6 temporary addresses, a server needs to mitigate the impact of such an attack. Such mitigation might involve rate limiting handshakes from a certain subnet or more advanced DoS/DDoS techniques beyond the scope of this paper.

9.1. Authenticating a DNS Privacy Server

DNS privacy requires encrypting the query (and response) from passive attacks. Such encryption typically provides integrity protection as a side-effect, which means on-path attackers cannot simply inject bogus DNS responses. However, to provide stronger protection from active attackers pretending to be the server, the server itself needs to be authenticated. To authenticate the server providing DNS privacy, DNS client can use the authenication mechanisms discussed in [I-D.dgr-dprive-dtls-and-tls-profiles].

10. Acknowledgements

Thanks to Phil Hedrick for his review comments on TCP and to Josh Littlefield for pointing out DNSoD load on busy servers (most notably root servers). The authors would like to thank Simon Josefsson, Daniel Kahn Gillmor, Bob Harold, Ilari Liusvaara, Sara Dickinson, Christian Huitema and Stephane Bortzmeyer for discussions and comments on the design of DNSoD.

11. References

11.1. Normative References

11.2. Informative References

Authors' Addresses