| ecrit | B.R. Rosen |
| Internet-Draft | NeuStar |
| Intended status: Best Current Practice | J.P. Polk |
| Expires: September 29, 2011 | Cisco Systems |
| March 28, 2011 |
Best Current Practice for Communications Services in support of Emergency Calling
The IETF and other standards organization have efforts targeted at standardizing various aspects of placing emergency calls on IP networks. This memo describes best current practice on how devices, networks and services should use such standards to make emergency calls.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on September 29, 2011.
Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
This document uses terms from [RFC3261], [RFC5012] and [I-D.ietf-ecrit-framework].
This document describes how access networks, Session Initiation Protocol [RFC3261] user agents, proxy servers and Public Safety Access Points (PSAPs) support emergency calling, as outlined in [I-D.ietf-ecrit-framework], which is designed to complement the present document in section headings, numbering and content. This BCP succinctly describes the requirements of end devices and applications (requirements prefaced by "ED-"), access networks (including enterprise access networks) (requirements prefaced by "AN-"), service providers (requirements prefaced by "SP-") and PSAPs to achieve globally interoperable emergency calling on the Internet.
This document also defines requirements for "Intermediate" devices which exist between end devices or applications and the access network. For example, a home router is an "Intermediate" device. Reporting location on an emergency call (see Section 6) may depend on the ability of such intermediate devices to meet the requirements prefaced by "INT-".
An emergency call can be distinguished (Section 5) from any other call by a unique Service URN [RFC5031], which is placed in the call set-up signaling when a home or visited emergency dial string is detected. Because emergency services are local to specific geographic regions, a caller must obtain his location (Section 6) prior to making emergency calls. To get this location, either a form of measuring (e.g., GPS) (Section 6.2.3) device location in the endpoint is deployed, or the endpoint is configured (Section 6.5) with its location from the access network's Location Information Server (LIS). The location is conveyed (Section 6.7) in the SIP signaling with the call. The call is routed (Section 8) based on location using the Location-to-Service Translation (LoST) protocol [RFC5222], which maps a location to a set of PSAP URIs. Each URI resolves to a PSAP or an Emergency Services Routing Proxy (ESRP), which serves a group of PSAPs. The call arrives at the PSAP with the location included in the SIP INVITE request.
ED-1 A device or application SHOULD support emergency calling if a user could reasonably expect to be able to place a call for help with the device. Some jurisdictions have regulations governing this.
SP-1 If a device or application expects to be able to place a call for help, the service provider that supports it MUST facilitate emergency calling. Some jurisdictions have regulations governing this.
ED-2 Devices that create media sessions and exchange real-time audio, video and/or text, have the capability to establish sessions to a wide variety of addresses, and communicate over private IP networks or the Internet, SHOULD support emergency calls. Some jurisdictions have regulations governing this.
ED-3 Endpoints SHOULD recognize dial strings of emergency calls. If the service provider always knows the location of the device, then the service provider could recognize them.
SP-2 Proxy servers SHOULD recognize emergency dial strings if for some reason the endpoint does not recognize them.
ED-4/SP-3 Emergency calls MUST be marked with a Service URN in the Request-URI of the INVITE.
ED-5/SP-4 Geographically local dial strings MUST be recognized.
ED-6/SP-5 Devices MUST be able to be configured with the home country from which the home dial string(s) can be determined.
ED-7/SP-6 Emergency dial strings SHOULD be determined from LoST [RFC5222]. Dial Strings MAY be configured directly into the device.
AN-1 LoST servers MUST return dial strings for emergency services.
ED-8 Endpoints which do not recognize emergency dial strings SHOULD send dial strings as per [RFC4967].
SP-7 If a proxy server recognizes dial strings on behalf of its clients, it MUST recognize emergency dial strings represented by [RFC4967] and SHOULD recognize the emergency dial strings represented by a tel URI [RFC3966].
ED-9 Endpoints SHOULD be able to have home dial strings provisioned.
SP-8 Service providers MAY provision home dial strings in devices.
ED-10 Devices SHOULD NOT have one button emergency calling initiation.
ED-11/SP-9 All sub-services for the 'sos' service specified in [RFC5031]. MUST be recognized.
Handling location for emergency calling usually involves several steps to process and multiple elements are involved. In Internet emergency calling, where the endpoint is located is "determined" using a variety of measurement or wiretracing methods. Endpoints can be "configured" with their own location by the access network. In some circumstances, a proxy server can insert location into the signaling on behalf of the endpoint. The location is "mapped" to the URI to send the call to, and the location is "conveyed" to the PSAP (and other elements) in the signaling. Likewise, we employ Location Configuration Protocols, the Location-to-Service Mapping Protocol, and Location Conveyance Protocols for these functions. The Location-to-Service Translation protocol [RFC5222] is the Location Mapping Protocol defined by the IETF.
There are several forms of location. All IETF location configuration and location conveyance protocols support both civic and geospatial (geo) forms. The civic forms include both postal and jurisdictional fields. A cell tower/sector can be represented as a point (geo or civic) or polygon. Other forms of location representation MUST be mapped into either a geo or civic for use in emergency calls.
ED-12/INT-1/SP-10 Endpoints, Intermediate Devices and Service Providers MUST be prepared to handle location represented in either civic or geo form.
ED-13/INT-2/SP-11/AN-2 Elements MUST NOT convert (civic to geo or geo to civic) from the form of location the determination mechanism supplied prior to receipt by the PSAP.
ED-14/INT-3/AN-3 Any location determination mechanism MAY be used, provided the accuracy of the location meets local requirements.
ED-15/INT-4/AN-4 Devices, intermediate Devices and/or access networks SHOULD support a manual method to override the location the access network determines. When the override location is supplied in civic form, it MUST be possible for the resultant Presence Information Data Format - Location Object (PIDF-LO) received at the PSAP to contain any of the elements specified in [RFC4119] and [RFC5139].
AN-5 Access networks supporting copper, fiber or other hard wired IP packet service SHOULD support location configuration. If the network does not support location configuration, it MUST require every device that connects to the network to support end system measured location.
AN-6/INT-5 Access networks and intermediate devices providing wire database location information SHOULD provide interior location data (building, floor, room, cubicle) where possible. It is RECOMMENDED that interior location be provided when spaces exceed approximately 650 square meters. See [I-D.ietf-ecrit-framework] Section 6.2.2 for a discussion of how this value was determined.
AN-7/INT-6 Access networks and intermediate devices (including enterprise networks) which support intermediate range wireless connections (typically 100m or less of range) and which do not support a more accurate location determination mechanism such as triangulation, MUST support location configuration where the location of the access point is reflected as the location of the clients of that access point.
AN-8/INT-7 Where the access network provides location configuration, intermediate devices MUST either be transparent to it, or provide an interconnected client for the supported configuration mechanism and a server for a configuration protocol supported by end devices downstream of the intermediate device such that the location provided by the access network is available to clients as if the intermediate device was not in the path.
ED-16/INT-8 Devices MAY support end-system measured location. See [I-D.ietf-ecrit-framework] Section 6 for a discussion of accuracy of location.
ED-17/INT-9/AN-9 Devices that support endpoint measuring of location MUST have at least a coarse location capability (typically <1km accuracy) for routing of calls. The location mechanism MAY be a service provided by the access network.
AN-10 Access networks MAY provide network-measured location determination. Wireless access networks that do not supply network measured location MUST require that all devices connected to the network have end-system measured location. Uncertainty and confidence may be specified by local regulation. Where not specified, uncertainty of less than 100 meters with 95% confidence is RECOMMENDED for dispatch location.
AN-11 Access networks that provide network measured location MUST have at least a coarse location (typically <1km when not location hiding) capability at all times for routing of calls.
AN-12 Access networks with range of <10 meters (e.g. personal area networks such as Bluetooth MUST provide a location to mobile devices connected to them. The location provided SHOULD be that reported by the upstream access network unless a more accurate mechanism is available.
ED-18/INT-10 Endpoints SHOULD attempt to configure their own location using the Location Configuration Protocols (LCPs) listed in ED-21.
SP-12 Proxies MAY provide location on behalf of devices if:
ED-19/INT-11/SP-13 Where proxies provide location on behalf of endpoints, the service provider MUST ensure that either the end device is provided with the local dial strings for its current location (where the end device recognizes dial strings), or the service provider proxy MUST detect the appropriate local dial strings at the time of the call.
ED-20/INT-12 Devices SHOULD be able to accept and forward location by value or by reference. An end device that receives location by reference (and does not also get the corresponding value) MUST be able to perform a dereference operation to obtain a value.
ED-21/INT-13 Devices MUST support both the Dynamic Host Configuration Protocol (DHCP) location options [RFC4776], [RFC3825] and HTTP Enabled Location Delivery (HELD) [RFC5985]. When devices deploy a specific access network interface for which location configuration mechanisms such as Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) [LLDP-MED] or 802.11v are specified, the device SHOULD support the additional respective access network specific location configuration mechanism.
AN-13/INT-14 The access network MUST support either DHCP location options or HELD. The access network SHOULD support other location configuration technologies that are specific to the type of access network.
AN-14/INT-15 Where a router is employed between a LAN and WAN in a small (less than approximately 650 square meters) area, the router MUST be transparent to the location provided by the WAN to the LAN. This may mean the router must obtain location as a client from the WAN, and supply an LCP server to the LAN with the location it obtains. Where the area is larger, the LAN MUST have a location configuration mechanism satisfying the requirements of this document.
ED-22/INT-16 Endpoints SHOULD try all LCPs supported by the device in any order or in parallel. The first one that succeeds in supplying location MUST be used.
AN-15/INT-17 Access networks that support more than one LCP MUST reply with the same location information (within the limits of the data format for the specific LCP) for all LCPs it supports.
ED-23/INT-18/SP-14 When HELD is the LCP, the request MUST specify a value of "emergencyRouting" for the "responseTime" parameter and use the resulting location for routing. If a value for dispatch location will be sent, another request with the "responseTime" parameter set to "emergencyDispatch" must be completed, with the result sent for dispatch purposes.
ED-24 Where the operating system supporting application programs which need location for emergency calls does not allow access to Layer 2 and Layer 3 functions necessary for a client application to use DHCP location options and/or other location technologies that are specific to the type of access network, the operating system MUST provide a published API conforming to ED-12 through ED-23 and ED-25 through ED-32. It is RECOMMENDED that all operating systems provide such an API.
ED-25/INT-19 Endpoints SHOULD obtain location immediately after obtaining local network configuration information.
ED-26/INT-20 If the device is configured to use DHCP for bootstrapping, it MUST include both options for location acquisition (civic and geodetic), the option for LIS discovery, and the option for LoST discovery as defined in [RFC4776], [RFC3825], [RFC5986] and [RFC5223].
ED-27/INT-21 If the device sends a DHCPINFORM message, it MUST include both options for location acquisition (civic and geodetic), the option for LIS discovery, and the option for LoST discovery as defined in [RFC4776], [RFC3825], [RFC5986] and [RFC5223].
ED-28/INT-22 To minimize the effects of VPNs that do not allow packets to be sent via the native hardware interface rather than via the VPN tunnel, location configuration SHOULD be attempted before such tunnels are established.
ED-29/INT-23 Software which uses LCPs SHOULD locate and use the actual hardware network interface rather than a VPN tunnel interface to direct LCP requests to the LIS in the actual access network.
AN-16 Network administrators MUST take care in assigning IP addresses such that VPN address assignments can be distinguished from local devices (by subnet choice, for example), and LISs SHOULD NOT attempt to provide location to addresses that arrive via VPN connections unless it can accurately determine the location for such addresses.
AN-17 Placement of NAT devices where an LCP uses IP address for an identifier SHOULD consider the effect of the NAT on the LCP. The address used to query the LIS MUST be able to correctly identify the record in the LIS representing the location of the querying device
ED-30/INT-24 For devices which are not expected to change location, refreshing location on the order of once per day is RECOMMENDED.
ED-31/INT-25 For devices which roam, refresh of location information SHOULD be more frequent, with the frequency related to the mobility of the device and the ability of the access network to support the refresh operation. If the device detects a link state change that might indicate having moved, for example when it changes access points, the device SHOULD refresh its location.
ED-32/INT-26/AN-18 It is RECOMMENDED that location determination not take longer than 250 ms to obtain routing location and systems SHOULD be designed such that the typical response is under 100 ms. However, as much as 3 seconds to obtain routing location MAY be tolerated if location accuracy can be substantially improved over what can be obtained in 250 ms.
ED-33/SP-15 Location sent between SIP elements MUST be conveyed using [I-D.ietf-sipcore-location-conveyance].
ED-34/AN-19 Where the absolute location or the accuracy of location of the endpoint may change between the time the call is received at the PSAP and the time dispatch is completed, location update mechanisms MUST be implemented and used.
ED-35/AN-20 Mobile devices MUST be provided with a mechanism to get repeated location updates to track the motion of the device during the complete processing of the call.
ED-36/AN-21 The LIS SHOULD provide a location reference which permits a subscription with appropriate filtering.
ED-37/AN-22 For calls sent with location-by-reference, with a SIP or SIPS scheme, the server resolving the reference MUST support a SUBSCRIBE [RFC3265] to the presence event [RFC3856]. For other location-by-reference schemes that do not support subscription, the PSAP will have to repeatedly dereference the URI to determine if the device moved.
ED-38 If location was sent by value, and the endpoint gets updated location, it MUST send the updated location to the PSAP via a SIP re-INVITE or UPDATE request. Such updates SHOULD be limited to no more than one update every 10 seconds, a value selected to keep the load on a large PSAP manageable, and yet provide sufficient indication to the PSAP of motion.
ED-39/SP-16 If the LIS has more than one location for an endpoint it MUST conform to the rules in Section 3 of [RFC5491]
ED-40 If a UA has more than one location available to it, it MUST choose one location to route the call towards the PSAP. If multiple locations are in a single Presence Information Data Format (PIDF), the procedures in [RFC5491] MUST be followed. If the UA has multiple PIDFs, and has no reasonable basis to choose from among them, a random choice is acceptable.
SP-17 If a proxy inserts location on behalf of an endpoint, and it has multiple locations available for the endpoint it MUST choose one location to use to route the call towards the PSAP. If multiple locations are in a single PIDF, the procedures in [RFC5491] MUST be followed. If the proxy has multiple PIDFs, and has no reasonable basis to choose from among them, a random choice is acceptable.
SP-18 If a proxy is attempting to insert location but the UA conveyed a location to it, the proxy MUST use the UA's location for routing in the initial INVITE and MUST convey that location towards the PSAP. It MAY also include what it believes the location to be in a separate Geolocation header.
SP-19 All location objects received by a proxy MUST be delivered to the PSAP.
ED-41/SP-20 Location objects MUST be created with information about the method by which the location was determined, such as GPS, manually entered, or based on access network topology included in a PIDF- LO "method" element. In addition, the source of the location information MUST be included in a PIDF-LO "provided-by" element.
ED-42/SP-21 A location with a method of "derived" MUST NOT be used unless no other location is available.
AN-23 A LIS SHOULD perform location validation of civic locations via LoST before entering a location in its database.
ED-44 Endpoints SHOULD validate civic locations when they receive them from their LCP. Validation SHOULD be performed in conjunction with the LoST route query to minimize load on the LoST server.
AN-24 When the access network cannot determine the actual location of the caller, it MUST supply a default location. The default SHOULD be chosen to be as close to the probable location of the device as the network can determine. See [I-D.ietf-ecrit-framework]
SP-22 Proxies handling emergency calls MUST insert a default location in the INVITE if the incoming INVITE does not contain a location and the proxy does not have a method for obtaining a better location.
AN-25/SP-23 Default locations MUST be marked with method=Default and the proxy MUST be identified in provided-by element of the PIDF-LO.
ED-45 If the LCP does not return location in the form of a PIDF-LO [RFC4119], the endpoint MUST map the location information it receives from the configuration protocol to a PIDF-LO.
ED-46/AN-26 To prevent against spoofing of the DHCP server, elements implementing DHCP for location configuration SHOULD use [RFC3118], although the difficulty in providing appropriate credentials is significant.
ED-47 If S/MIME is used, the INVITE message MUST provide enough information unencrypted for intermediate proxies to route the call based on the location information included. This would include the Geolocation header, and any bodies containing location information. Use of S/MIME with emergency calls is NOT RECOMMENDED.
ED-48/SP-24 Either TLS or IPSEC [RFC3986] MUST be used to protect location (but see Section 9.1).
ED-49 Endpoints MUST support one or more mechanisms that allow them to determine their public IP address, for example, STUN [RFC5389].
ED-50 Endpoints MUST support LIS discovery as described in [RFC5986], and the LoST discovery as described in [RFC5223].
ED-51 The device MUST have a configurable default LoST server parameter.
ED-52 DHCP LoST discovery MUST be used, if available, in preference to configured LoST servers. That is, the endpoint MUST send queries to this LoST server first, using other LoST servers only if these queries fail.
AN-27 Access networks which support DHCP MUST implement the LIS and LoST discovery options in their DHCP servers and return suitable server addresses as appropriate.
ED-53 Endpoints who obtain their own location SHOULD perform LoST mapping to the PSAP URI.
ED-54 Mapping SHOULD be performed at boot time and whenever location changes beyond the service boundary obtained from a prior LoST mapping operation or the time-to-live value of that response has expired. The value MUST be cached for possible later use.
ED-55 The endpoint MUST attempt to update its location at the time of an emergency call. If it cannot obtain a new location quickly (see Section 6), it MUST use the cached value.
ED-56 The endpoint SHOULD attempt to update the LoST mapping at the time of an emergency call. If it cannot obtain a new mapping quickly, it MUST use the cached value. If the device cannot update the LoST mapping and does not have a cached value, it MUST signal an emergency call without a Route header containing a PSAP URI.
SP-25 Networks MUST be designed so that at least one proxy in the outbound path will recognize emergency calls with a Request URI of the service URN in the "sos" tree. An endpoint places a service URN in the Request URI to indicate that the endpoint understood the call was an emergency call. A proxy that processes such a call looks for the presence of a SIP Route header field with a URI of a PSAP. Absence of such a Route header indicates the UAC was unable to invoke LoST and the proxy MUST perform the LoST mapping and insert a Route header field with the URI obtained.
SP-26 To deal with old user agents that predate this specification and with UAs that do not have access to their own location data, a proxy that recognizes a call as an emergency call that is not marked as such (see Section 5) MUST also perform this mapping, with the best location it has available for the endpoint. The resulting PSAP URI would be placed in a Route header with the service URN in the Request URI.
SP-27 Proxy servers performing mapping SHOULD use location obtained from the access network for the mapping. If no location is available, a default location (see Section 6.11) MUST be supplied.
SP-28 A proxy server which attempts mapping and fails to get a mapping MUST provide a default mapping. A suitable default mapping would be the mapping obtained previously for the default location appropriate for the caller.
ED-57/SP-29 [RFC3261] and [RFC3263] procedures MUST be used to route an emergency call towards the PSAP's URI.
ED-58/SP-30 Either TLS or IPsec MUST be used when attempting to signal an emergency call.
ED-59/SP-31 If TLS session establishment is not available, or fails, the call MUST be retried without TLS.
ED-60/SP-32 [RFC5626] is RECOMMENDED to maintain persistent TLS connections between elements when one of the element is an endpoint. Persistent TLS connection between proxies is RECOMMENDED using any suitable mechanism.
ED-61/AN-28 TLS MUST be used when attempting to retrieve location (configuration or dereferencing) with HELD. The use of [RFC5077] is RECOMMENDED to minimize the time to establish TLS sessions without keeping server-side state.
ED-62/AN-29 When TLS session establishment fails, the location retrieval MUST be retried without TLS.
ED-63 The initial SIP signaling method is an INVITE request:
SP-33 SIP Proxy servers processing emergency calls:
ED-64/SP-34 Devices device SHOULD have a globally routable URI in a Contact: header field which remains valid for several minutes past the time the original call containing the URI completes unless the device registration expires and is not renewed.
SP-35 Call backs to the Contact: header URI received within 30 minutes of an emergency call must reach the device regardless of call features or services that would normally cause the call to be routed to some other entity.
SP-36 Devices MUST have a persistent AOR URI either in a P-Asserted-Identity header field or From protected by an Identity header field suitable for returning a call some time after the original call. Such a call back would not necessarily reach the device that originally placed the call.
ED-65/SP-37 During the course of an emergency call, devices and proxies MUST initiate a call transfer upon receipt of REFER request within the dialog with method=INVITE and the Referred-by header field [RFC3515] in that request.
ED-66 There can be a case where the session signaling path is lost, the PSAP terminates the call but the user agent does not receive the BYE. The PSAP would not receive the ACK and may initiate a call back. If an incoming call is received from the domain of the PSAP, the device MUST alert for the (new) incoming call. The domain of an incoming call can only be determined from the From header, which is not reliable, and could be spoofed. Dropping an active call by a new call with a spoofed From header field would be a DoS attack.
ED-67/SP-38 User Agents and proxies MUST disable features that will interrupt an ongoing emergency call, such as: Section 14.
when an emergency call is established, but see ED-66 with respect to Call Waiting. Also see ED-74 in
ED-68/SP-39 The emergency dial strings SHOULD NOT be permitted in Call Forward numbers or speed dial lists.
ED-69/SP-40 The User Agent and Proxies MUST disable call features which would interfere with the ability of call backs from the PSAP to be completed such as:
These features SHOULD be disabled for approximately 30 minutes following termination of an emergency call.
ED-70 Call backs SHOULD be determined by retaining the domain of the PSAP which answers an outgoing emergency call and instantiating a timer which starts when the call is terminated. If a call is received from the same domain and within the timer period, sent to the Contact: or AoR used in the emergency call, it should be assumed to be a call back. The suggested timer period is 5 minutes. [RFC4916] may be used by the PSAP to inform the UA of the domain of the PSAP. Recognizing a call back from the domain of the PSAP will not always work, and further standardization will be required to give the UA the ability to recognize a call back.
ED-71 Endpoints MUST send and receive media streams on RTP [RFC3550].
ED-72 Normal SIP offer/answer [RFC3264] negotiations MUST be used to agree on the media streams to be used.
ED-73/SP-41 G.711 A law (and mu Law if they are intended be used in North America) encoded voice as described in [RFC3551] MUST be supported. If the endpoint cannot support G.711, a transcoder MUST be used so that the offer received at the PSAP contains G.711. It is desirable to include wideband codecs such as G.722 and AMR-WB in the offer. PSAPs SHOULD support narrowband codecs common on endpoints in their area to avoid transcoding.
ED-74 Silence suppression (Voice Activity Detection methods) MUST NOT be used on emergency calls. PSAP call takers sometimes get information on what is happening in the background to determine how to process the call.
ED-75 Endpoints supporting Instant Messaging (IM) MUST support either [RFC3428] and [RFC4975].
ED-76 Endpoints supporting real-time text MUST use [RFC4103]. The expectations for emergency service support for the real-time text medium are described in [RFC5194], Section 7.1.
ED-77 Endpoints supporting video MUST support H.264 per [I-D.ietf-avt-rtp-rfc3984bis].
ED-78 INVITE requests to a service URN starting with "test." indicates a request for an automated test. For example, "urn:servicetest.sos.fire". As in standard SIP, a 200 (OK) response indicates that the address was recognized and a 404 (Not found) that it was not. A 486 (Busy Here) MUST be returned if the test service is busy, and a 404 (Not found) MUST be returned if the PSAP does not support the test mechanism.
ED-79 In its response to the test, the PSAP MAY include a text body (text/plain) indicating the identity of the PSAP, the requested service, and the location reported with the call. For the latter, the PSAP SHOULD return location-by-value even if the original location delivered with the test was by-reference. If the location-by-reference was supplied, and the dereference requires credentials, the PSAP SHOULD use credentials supplied by the LIS for test purposes. This alerts the LIS that the dereference is not for an actual emergency call and location hiding techniques, if they are being used, may be employed for this dereference. Use of SIPS for the request would assure the response containing the location is kept private
ED-80 A PSAP accepting a test call SHOULD accept a media loopback test [I-D.ietf-mmusic-media-loopback] and SHOULD support the "rtp-pkt-loopback" and "rtp-start-loopback" options. The user agent would specify a loopback attribute of "loopback-source", the PSAP being the mirror. User Agents should expect the PSAP to loop back no more than 3 packets of each media type accepted (which limits the duration of the test), after which the PSAP would normally send BYE.
ED-81 User agents SHOULD perform a full call test, including media loopback, after a disconnect and subsequent change in IP address not due to a reboot. After an initial test, a full test SHOULD be repeated approximately every 30 days with a random interval.
ED-82 User agents MUST NOT place a test call immediately after booting. If the IP address changes after booting, the UA should wait a random amount of time (in perhaps a 30 minute period, sufficient for any avalanche restart to complete) and then test.
ED-83 PSAPs MAY refuse repeated requests for test from the same device in a short period of time. Any refusal is signaled with a 486 or 488 response.
Security considerations for emergency calling have been documented in [RFC5069], and [I-D.ietf-geopriv-arch].
This document registers service URNs in the Service URN Labels registry per [RFC5031] for testing.
A new entry in the URN Service Label registry is added. The new service is "test", the reference is this document, and the description is "self test".
A new Subregistry is created, the "'test' Sub-Service. The registration process is Expert review by ECRIT working group, its successor, or, in their absence, the IESG. The Reference is this document. The initial content of the subregistry is:
Service Reference Description
--------------------------------------------------------------------
test.sos [this document] test for sos
test.sos.ambulance [this document] test for sos.ambulance
test.sos.animal-control [this document] test for sos.animal-control
test.sos.fire [this document] test for sos.fire
test.sos.gas [this document] test for sos.gas
test.sos.marine [this document] test for sos.marine
test.sos.mountain [this document] test for sos.mountain
test.sos.physician [this document] test for sos.physician
test.sos.poison [this document] test for sos.poison
test.sos.police [this document] test for sos.police
Work group members participating in the creation and review of this document include Hannes Tschofenig, Ted Hardie, Marc Linsner, Roger Marshall, Stu Goldman, Shida Schubert, James Winterbottom, Barbara Stark, Richard Barnes and Peter Blatherwick.