| TOC |
|
By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”
The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.
This Internet-Draft will expire on May 8, 2009.
This document describes filters which limit asynchronous location notifications to compelling events. The resulting location information is conveyed in existing location formats wrapped in GEOPRIV privacy extensions to the Presence Information Document Format (PIDF-LO)
1.
Conventions
2.
Overview
3.
Definition of Location Filter Format
3.1.
Horizontal and Vertical Movement
3.2.
Changes in value
3.3.
Containment Within a Region
3.4.
Rate Control
3.5.
XML Schema for filter format
4.
Containment schema
5.
Security Considerations
6.
IANA Considerations
6.1.
MIME Registration for application/location-delta-filter+xml
6.2.
URN Sub-Namespace Registration for
urn:ietf:params:xml:ns:location-filter
6.3.
Schema Registration For location-filter
6.4.
URN Sub-Namespace Registration for
urn:ietf:params:xml:ns:pidf:geopriv10:containment
6.5.
Schema Registration For containment
7.
Acknowledgments
8.
References
8.1.
Normative References
8.2.
Informational References
§
Authors' Addresses
§
Intellectual Property and Copyright Statements
| TOC |
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC-2119 (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.) [RFC2119].
| TOC |
Conveying static location in PIDF-LO (Peterson, J., “A Presence-based GEOPRIV Location Object Format,” December 2005.) [RFC4119] bodies is straightforward. However the difficult part about asynchronous notification of location information is that many forms of location are measured as a continuous gradient. Unlike notifications using discreet quantities, it is difficult to know when a change in location is large enough to warrant a notification. Moreover, different applications require a wide variety of location resolutions. Any optimization made for one application would ultimately result in wasteful polling or a sluggish user interface for other applications.
The mechanism described here defines filters in XML (Bray, T., Paoli, J., Sperberg-McQueen, C., and E. Maler, “Extensible Markup Language (XML) 1.0 (2nd ed),” October 2000.) [W3C.REC‑xml] documents which limit location notification to events which are of relevance to the subscriber. These filters persist until they are changed with a replacement filter.
In addition to the relevant filters, this document also defines a new XML schema (Thompson, H., Beech, D., Maloney, M., and N. Mendelsohn, “XML Schema Part 1: Structures,” May 2001.) [W3C.REC‑xmlschema‑1] which can be included in PIDF-LO documents to indicate that the resource is inside or outside of a container region.
| TOC |
The granularity of notifications necessary for various geographic location applications varies dramatically. The subscriber should be able to get asynchronous notifications with appropriate granularity and accuracy, without having to poll or flood the network with notifications which are not important to the application. Notifications should only happen when the notification would be considered an Interesting Event to the subscriber. This section of this document defines an XML filter format to describe interesting conditions or events. The terminal elements in this format are defined in terms of existing Geographic Markup Language (GML) (OpenGIS, “Open Geography Markup Language (GML) Implementation Specification,” January 2003.) [GML] data types or civic address elements.
This document also defines a MIME type for this location filter format: application/location-delta-filter+xml.
This document defines the following as an initial list of Interesting Events:
This specification makes use of XML namespaces (Bray, T., Hollander, D., and A. Layman, “Namespaces in XML,” January 1999.) [W3C.REC‑xml‑names] for identifying location filter documents and document fragments. The namespace URI for elements defined by this specification is a URN [RFC2141] (Moats, R., “URN Syntax,” May 1997.), using the namespace identifier 'ietf' defined by [RFC2648] (Moats, R., “A URN Namespace for IETF Documents,” August 1999.) and extended by [RFC3688] (Mealling, M., “The IETF XML Registry,” January 2004.). This URN is:
urn:ietf:params:xml:ns:location-filter
The filter format starts with a top-level XML element called <location-filter>, which contains one or more filter events. The semantics of multiple elements inside a location-filter generally is a logical OR. In other words, if any of the individual filter events occurs, the event satisfies the location-filter and triggers a notification. However the "maxRate" parameter is a logical AND, and will limit events that otherwise would have been reported.
| TOC |
The movedHoriz and movedVert filter events each indicate a minimum horizontal motion or vertical distance (respectively) that the resource must have moved from the location of the resource when the last notification was sent in order to trigger this event. The distance is measured absolutely from the point of last notification rather than in terms of cumulative motion (For example, someone pacing inside a room will not trigger an event if the trigger threshold is slightly larger than the room.) Each of these events can only appear once in a location-filter. These events have an attribute "uom" (for "units of measure"), which indicates the units of the element. The default unit for these events is meters.
Similarly, the speedExceeds filter event indicates a minimum horizontal speed of the resource before the speedExceeds event is triggered. This element can appear only once in a location-filter, and has a "uom" attribute which defaults to meters per second if not present.
This filter measures the horizontal component of speed in any direction. It does not measure velocity. Note also that there is no corresponding event triggered when speed drops below a threshold.
Below are some examples. In the first example if the resource moves 20m in the x,y direction or 3m in the z direction, send a notification:
<location-filter> <movedHoriz uom="urn:ogc:def:uom:EPSG::9001">20</movedHoriz> <movedVert uom="urn:ogc:def:uom:EPSG::9001">3</movedVert> </location-filter>
If the resource exceeds 3 meters per second (10.8 km/h), send a notification:
<location-filter> <speedExceeds uom="#mps">3</speedExceeds> </location-filter>
| TOC |
The valueChanges filter event contains a string which is interpreted as an XPath (Clark, J. and S. DeRose, “XML Path Language (XPath) Version 1.0,” November 1999.) [W3C.xpath] expression evaluated within the context of the location-info element of the PIDF-LO document which would be generated by the notification. The XPath expression MUST evaluate to only a single Xpath node. If the value of any of the elements in the resulting node changes, then the filter event is triggered. Note that the value of the resulting node changes if any of those nodes or subnodes transitions from having a value to having no value or vice versa. A location-filter may contain multiple valueChanges filters.
For example, given the following logical PIDF-LO document, If the state (A1), county (A2), city (A3), or postal code (PC) changes, send a notification:
PIDF-LO Location Document:
<?xml version="1.0" encoding="UTF-8"?>
<presence xmlns="urn:ietf:params:xml:ns:pidf"
xmlns:gp="urn:ietf:params:xml:ns:pidf:geopriv10"
xmlns:cl="urn:ietf:params:xml:ns:pidf:geopriv10:civilLoc"
entity="pres:geotarget@example.com">
<tuple id="sg89ae">
<status>
<gp:geopriv>
<gp:location-info>
<cl:civilAddress>
<cl:country>US</cl:country>
<cl:A1>NY</cl:A1>
<cl:A3>New York</cl:A3>
<cl:RD>Broadway</cl:RD>
<cl:HNO>123</cl:HNO>
<cl:UNIT>Suite 75</cl:UNIT>
<cl:PC>10027</cl:PC>
</cl:civilAddress>
</gp:location-info>
<gp:usage-rules>
<gp:retransmission-allowed>yes</gp:retransmission-allowed>
<gp:retention-expiry>2003-06-23T04:57:29Z
</gp:retention-expiry>
</gp:usage-rules>
</gp:geopriv>
</status>
<timestamp>2003-06-22T20:57:29Z</timestamp>
</tuple>
</presence>
Filter Document:
<location-filter
xmlns="urn:ietf:params:xml:ns:location-filter"
xmlns:cl="urn:ietf:params:xml:ns:pidf:geopriv10:civilLoc">
<valueChanges>cl:civilAddress/cl:A1</valueChanges>
<valueChanges>cl:civilAddress/cl:A2</valueChanges>
<valueChanges>cl:civilAddress/cl:A3</valueChanges>
<valueChanges>cl:civilAddress/cl:PC</valueChanges>
</location-filter>
| TOC |
The "enterOrExit" filter event is satisfied when the resource enters or exits a named 2-dimensional or 3-dimensional region described by one of the shapes defined in section 5 of [I‑D.ietf‑geopriv‑pdif‑lo‑profile] (Winterbottom, J., Thomson, M., and H. Tschofenig, “GEOPRIV PIDF-LO Usage Clarification, Considerations and Recommendations,” November 2008.). These regions can be defined using inline snippets of GML, or externally referenced using a URI (Uniform Resource Identifier).
These regions need a unique name or identifier so location with respect to these regions can be described later (for example in a notification). These regions are currently described as GML Features so they can be named with a GML Name. Ideally each region could be described instead as a GML geometry with some associated name or identifier.
Any 2-dimensional region MUST be defined using the EPSG 4326 coordinate reference system. Any 3-dimensional region MUST be defined using the EPSG 4979 coordinate reference system. A location-filter can contain more than one enterOrExit filter event.
Notifiers MAY support other more complex geometries or additional coordinate reference systems. How the Subscriber negotiates support for more complex geometries or reference systems is out of the scope of this document.
Likewise, this document does not describe how a subscriber discovers the existence of externally referenced features. This topic is out of scope of this document.
In most cases Subscribers that use location filters based on enterOrExit events are especially interested in the resource's relationship to those named features. Consequently, the notifier MUST include either a "containment" element for each feature mentioned in the location-filter which has changed its containment properties with respect to the resource since the last notification. These elements are defined in Section 4 (Containment schema). The notifier MAY include any other form of location that is relevant.
For example, if the resource enters or exits Building 10 (which is defined by specific 2-D or 3-D rectangular coordinates), send a notification:
Version in 2-Dimensions:
<location-filter>
<enterOrExit>
<my:Building>
<gml:name>Building 10</gml:name>
<gml:extentOf>
<gml:Polygon
srsName="urn:ogc:def:crs:EPSG::4326"
xmlns:gml="http://www.opengis.net/gml">
<gml:exterior>
<gml:LinearRing>
<gml:posList
37.41188 -121.93243
37.41142 -121.93243
37.41142 -121.93132
37.41188 -121.93132
37.41188 -121.93243
</gml:posLis>
</gml:LinearRing>
</gml:exterior>
</gml:Polygon>
</gml:extentOf>
</my:Building>
</enterOrExit>
</location-filter>
Version in 3-Dimensions:
<location-filter>
<enterOrExit>
<my:Building>
<gml:name>Building 10</gml:name>
<gs:Prism
srsName="urn:ogc:def:crs:EPSG::4979"
xmlns:gs="urn:ietf:params:xml:ns:pidf:geopriv10:geoShape"
xmlns:gml="http://www.opengis.net/gml">
<gs:base>
<gml:Polygon>
<gml:exterior>
<gml:LinearRing>
<gml:posList>
37.41188 -121.93243 0
37.41142 -121.93242 0
37.41142 -121.93132 0
37.41188 -121.93132 0
37.41188 -121.93243 0
</gml:posList>
</gml:LinearRing>
</gml:exterior>
</gml:Polygon>
</gs:base>
<gs:height uom="urn:ogc:def:uom:EPSG::9001">
24
</gs:height>
</gs:Prism>
</my:Building>
</enterOrExit>
</location-filter>
If the resource enters or exits either the parking garage or any of the conference rooms (both of which are externally defined), send a notification:
<location-filter>
<enterOrExit>
<my:ParkingGarage
xlink:href="http://server.example.com/loc-defs/bldg-mgr/parking"/>
</enterOrExit>
<enterOrExit>
<my:ConferenceRooms
xlink:href="http://server.example.com/loc-defs/userdef/confrooms"/>
</enterOrExit>
</location-filter>
| TOC |
Although not part of the loc-filter function, the throttle mechanisms [I‑D.niemi‑sipping‑event‑throttle] (Niemi, A., Kiss, K., and S. Loreto, “Session Initiation Protocol (SIP) Event Notification Extension for Notification Throttling,” February 2009.) can be used to control the rate of notifications. The "throttle", "force" and "average" settings can filter notications by time
| TOC |
The XML Schema for this format is defined below.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
targetNamespace="urn:ietf:params:xml:ns:location-filter"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:gml="http://www.opengis.net/gml">
<xs:element name="location-filter">
<xs:complexType>
<xs:sequence>
<xs:element name="movedHoriz" type="gml:MeasureType"
minOccurs="0" maxOccurs="1"/>
<xs:element name="movedVert" type="gml:MeasureType"
minOccurs="0" maxOccurs="1"/>
<xs:element name="speedExceeds" type="gml:MeasureType"
minOccurs="0" maxOccurs="1"/>
<!-- this type needs to hold an XPath statement -->
<xs:element name="valueChanges" type="xs:string"
minOccurs="0" maxOccurs="unbounded"/>
<xs:element name="enterOrExit" type="gml:FeaturePropertyType"
minOccurs="0" maxOccurs="unbounded"/>
<xs:element name="minRate" type="xs:rate-spec"
minOccurs="0" maxOccurs="1"/>
<xs:element name="maxRate" type="xs:rate-spec"
minOccurs="0" maxOccurs="1"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="rate-spec">
<xs:complexType>
<xs:sequence>
<xs:attribute name="uom" use="required">
<xs:simpleType>
<xs:restriction base="xs:token">
<xs:enumeration value="seconds"></xs:enumeration>
<xs:enumeration value="minutes"></xs:enumeration>
<xs:enumeration value="hours"></xs:enumeration>
<xs:enumeration value="days"></xs:enumeration>
<xs:enumeration value="weeks"></xs:enumeration>
<xs:enumeration value="years"></xs:enumeration>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
targetNamespace="urn:ietf:params:xml:ns:location-filter"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:gml="http://www.opengis.net/gml">
<xs:element name="location-filter">
<xs:complexType>
<xs:sequence>
<xs:element name="movedHoriz" type="gml:MeasureType"
minOccurs="0" maxOccurs="1"/>
<xs:element name="movedVert" type="gml:MeasureType"
minOccurs="0" maxOccurs="1"/>
<xs:element name="speedExceeds" type="gml:MeasureType"
minOccurs="0" maxOccurs="1"/>
<!-- this type needs to hold an XPath statement -->
<xs:element name="valueChanges" type="xs:string"
minOccurs="0" maxOccurs="unbounded"/>
<xs:element name="enterOrExit" type="gml:FeaturePropertyType"
minOccurs="0" maxOccurs="unbounded"/>
<xs:element name="minRate" type="xs:rate-spec"
minOccurs="0" maxOccurs="1"/>
<xs:element name="maxRate" type="xs:rate-spec"
minOccurs="0" maxOccurs="1"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="rate-spec">
<xs:complexType>
<xs:sequence>
<xs:attribute name="uom" use="required">
<xs:simpleType>
<xs:restriction base="xs:token">
<xs:enumeration value="seconds"></xs:enumeration>
<xs:enumeration value="minutes"></xs:enumeration>
<xs:enumeration value="hours"></xs:enumeration>
<xs:enumeration value="days"></xs:enumeration>
<xs:enumeration value="weeks"></xs:enumeration>
<xs:enumeration value="years"></xs:enumeration>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
targetNamespace="urn:ietf:params:xml:ns:location-filter"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:gml="http://www.opengis.net/gml">
<xs:element name="location-filter">
<xs:complexType>
<xs:sequence>
<xs:element name="movedHoriz" type="gml:MeasureType"
minOccurs="0" maxOccurs="1"/>
<xs:element name="movedVert" type="gml:MeasureType"
minOccurs="0" maxOccurs="1"/>
<xs:element name="speedExceeds" type="gml:MeasureType"
minOccurs="0" maxOccurs="1"/>
<!-- this type needs to hold an XPath statement -->
<xs:element name="valueChanges" type="xs:string"
minOccurs="0" maxOccurs="unbounded"/>
<xs:element name="enterOrExit" type="gml:FeaturePropertyType"
minOccurs="0" maxOccurs="unbounded"/>
<xs:element name="minRate" type="xs:rate-spec"
minOccurs="0" maxOccurs="1"/>
<xs:element name="maxRate" type="xs:rate-spec"
minOccurs="0" maxOccurs="1"/>
<xs:any namespace="##other" processContents="lax"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="rate-spec">
<xs:complexType>
<xs:sequence>
<xs:attribute name="uom" use="required">
<xs:simpleType>
<xs:restriction base="xs:token">
<xs:enumeration value="seconds"></xs:enumeration>
<xs:enumeration value="minutes"></xs:enumeration>
<xs:enumeration value="hours"></xs:enumeration>
<xs:enumeration value="days"></xs:enumeration>
<xs:enumeration value="weeks"></xs:enumeration>
<xs:enumeration value="years"></xs:enumeration>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
| TOC |
This section describes a schema for describing the resource's location relative to a region or list of regions which might contain the resource. (These regions can be defined dynamically in an "enterOrExit" element in a subscription filter, or defined on the notifier using some out-of-band mechanism.) The "pidfResource" element is placed inside the location-info element in a PIDF-LO document. The pidfResource element can contain zero or more "containment" elements. Each containment element has a GML Feature sub-element (of type "FeaturePropertyType") and a mandatory attribute which specifies if the PIDF resource is inside or outside of the feature, or if the position of the resource with respect to the region or region list is undefined.
In a future version of this specification, the GML Feature can become a reference to a more preferable name or identifier type. The GML Feature type is only used because it includes a name to reference it.
If the subscriber is not authorized to know the relative position, the notifier MUST NOT reveal this private information. The RECOMMENDED way to prevent the subscriber from seeing private location data of this type is to return a containment element whose position attribute is "undefined". Note that in some cases, the containment information may be more interesting than the actual raw location. It is not necessary to convey a concrete civic or geo location in a PIDF-LO if the subscriber is only interested in or authorized to see the containment status.
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema
targetNamespace="urn:ietf:params:xml:ns:pidf:geopriv10:containment"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:gml="http://www.opengis.net/gml"
xmlns:pr="urn:ietf:params:xml:ns:pidf:geopriv10:containment" >
<xs:element name="pidfResource">
<xs:complexType>
<xs:sequence>
<xs:element ref="pr:containment"
minOccurs="0" maxOccurs="unbounded"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="containment">
<xs:complexType>
<xs:sequence>
<xs:any namespace="http://www.opengis.net/gml"
minOccurs="1" maxOccurs="1"/>
</xs:sequence>
<xs:attribute name="position" use="required">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:enumeration value="inside"></xs:enumeration>
<xs:enumeration value="outside"></xs:enumeration>
<xs:enumeration value="undefined"></xs:enumeration>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
</xs:complexType>
</xs:element>
</xs:schema>
Below is an example PIDF-LO document which indicates that the resource is inside building 10, not outside the parking garage, and not permitted to know if the resource is in a conference room. Note that in GML, these features could be referenced by their unique identifiers instead.
<?xml version="1.0" encoding="UTF-8"?>
<presence xmlns="urn:ietf:params:xml:ns:pidf"
xmlns:gp="urn:ietf:params:xml:ns:pidf:geopriv10"
xmlns:pr="urn:ietf:params:xml:ns:pidf:geopriv10:containment"
entity="pres:geotarget@example.com">
<tuple id="sg89ae">
<status>
<gp:geopriv>
<gp:location-info>
<pr:pidfResource>
<pr:containment position="inside">
<my:Building>
<gml:name>Building 10</gml:name>
</my:Building>
</pr:containment>
<pr:containment position="outside">
<my:ParkingGarage
xlink:href="http://server.example.com/loc-defs/bldg-mgr/parking"/>
</pr:containment>
<pr:containment position="undefined">
<my:ConferenceRooms
xlink:href="http://server.example.com/loc-defs/userdef/confrooms"/>
</pr:containment>
</pr:pidfResource>
</gp:location-info>
<gp:usage-rules>
<gp:retransmission-allowed>yes</gp:retransmission-allowed>
<gp:retention-expiry>2003-06-23T04:57:29Z
</gp:retention-expiry>
</gp:usage-rules>
</gp:geopriv>
</status>
<timestamp>2003-06-22T20:57:29Z</timestamp>
</tuple>
</presence>
| TOC |
Location information is typically very privacy sensitive. As such, GEOPRIV requires that notifications MUST be encrypted and integrity protected.
Additional privacy and security considerations are discussed in detail in [I‑D.ietf‑geopriv‑pdif‑lo‑profile] (Winterbottom, J., Thomson, M., and H. Tschofenig, “GEOPRIV PIDF-LO Usage Clarification, Considerations and Recommendations,” November 2008.).
| TOC |
| TOC |
MIME media type name: application
MIME subtype name: application/location-delta-filter+xml
Required parameters: none.
Optional parameters: none.
Encoding considerations: Same as for XML.
Security considerations: See the "Security Considerations"
section in this document.
Interoperability considerations: none
Published specification: This document.
Applications which use this media: The application/location-delta-filter+xml application subtype supports the exchange of filters to throttle asynchronous notifications of location information.
Additional information:
1. Magic number(s): N/A
2. File extension(s): N/A
3. Macintosh file type code: N/A
| TOC |
This section registers a new XML namespace, as per the guidelines in [RFC3688] (Mealling, M., “The IETF XML Registry,” January 2004.).
- URI:
- The URI for this namespace is urn:ietf:params:xml:ns:location-filter.
- Registrant Contact:
- IETF, GEOPRIV working group, <geopriv@ietf.org>, as delegated by the IESG <iesg@ietf.org>.
- XML:
BEGIN <?xml version="1.0"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN" "http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="content-type" content="text/html;charset=iso-8859-1"/> <title>Location Filter Namespace</title> </head> <body> <h1>Namespace for PIDF-LO Location Filters</h1> <h2>urn:ietf:params:xml:ns:location-filter</h2> <p>See <a href="[[[URL of published RFC]]]">RFCXXXX</a>.</p> </body> </html> END
| TOC |
This specification registers a schema, as per the guidelines in [RFC3688] (Mealling, M., “The IETF XML Registry,” January 2004.).
- URI: please assign.
- Registrant Contact: IETF, GEOPRIV Working Group (geopriv@ietf.org), as delegated by the IESG (iesg@ietf.org).
- XML: The XML can be found as the sole content of Section 3.5 (XML Schema for filter format).
| TOC |
This section registers a new XML namespace, as per the guidelines in [RFC3688] (Mealling, M., “The IETF XML Registry,” January 2004.).
- URI:
- The URI for this namespace is urn:ietf:params:xml:ns:pidf:geopriv10:containment.
- Registrant Contact:
- IETF, GEOPRIV working group, <geopriv@ietf.org>, as delegated by the IESG <iesg@ietf.org>.
- XML:
BEGIN <?xml version="1.0"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML Basic 1.0//EN" "http://www.w3.org/TR/xhtml-basic/xhtml-basic10.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="content-type" content="text/html;charset=iso-8859-1"/> <title>PIDF-LO Location Containment Namespace</title> </head> <body> <h1>Namespace for PIDF-LO location containment elements</h1> <h2>urn:ietf:params:xml:ns:pidf:geopriv10:containment</h2> <p>See <a href="[[[URL of published RFC]]]">RFCXXXX</a>.</p> </body> </html> END
| TOC |
This specification registers a schema, as per the guidelines in [RFC3688] (Mealling, M., “The IETF XML Registry,” January 2004.).
- URI: please assign.
- Registrant Contact: IETF, GEOPRIV Working Group (geopriv@ietf.org), as delegated by the IESG (iesg@ietf.org).
- XML: The XML can be found as the sole content of Section 4 (Containment schema).
| TOC |
Thanks to Allan Thompson, James Winterbottom, and Martin Thomson for their comments.
| TOC |
| TOC |
| TOC |
| [RFC2141] | Moats, R., “URN Syntax,” RFC 2141, May 1997 (TXT, HTML, XML). |
| [RFC2648] | Moats, R., “A URN Namespace for IETF Documents,” RFC 2648, August 1999 (TXT). |
| [RFC3688] | Mealling, M., “The IETF XML Registry,” BCP 81, RFC 3688, January 2004 (TXT). |
| TOC |
| Rohan Mahy | |
| Plantronics | |
| 345 Encincal Street | |
| Santa Cruz, CA | |
| USA | |
| Email: | rohan@ekabal.com |
| Brian Rosen | |
| NeuStar | |
| 470 Conrad Dr. | |
| Mars, PA 16046 | |
| US | |
| Phone: | +1 724 382 1051 |
| Email: | br@brianrosen.net |
| TOC |
Copyright © The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an “AS IS” basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org.