| LAMPS Working Group | H. Brockhaus |
| Internet-Draft | S. Fries |
| Intended status: Standards Track | D. von Oheimb |
| Expires: September 5, 2020 | Siemens |
| March 4, 2020 |
Lightweight CMP Profile
draft-ietf-lamps-lightweight-cmp-profile-01
The goal of this document is to facilitate interoperability and automation by profiling the Certificate Management Protocol (CMP) version 2, the related Certificate Request Message Format (CRMF) version 2, and the HTTP Transfer for the Certificate Management Protocol. It specifies a subset of CMP and CRMF focusing on typical uses cases relevant for managing certificates of devices in many industrial and IoT scenarios. To limit the overhead of certificate management for more constrained devices only the most crucial types of operations are specified as mandatory. To foster interoperability also in more complex scenarios, other types of operations are specified as recommended or optional.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on September 5, 2020.
Copyright (c) 2020 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Note: This section will be deleted in the final version of the document.
From version 00 -> 01:
From draft-brockhaus-lamps-lightweight-cmp-profile-03 -> draft-ietf-lamps-lightweight-cmp-profile-00:
From version 02 -> 03:
From version 01 -> 02:
From version 00 -> 01:
From draft-brockhaus-lamps-industrial-cmp-profile-00 -> draft-brockhaus-lamps-lightweight-cmp-profile-00:
This document specifies PKI management operations supporting machine-to-machine and IoT use cases. The focus lies on maximum automation and interoperable implementation of all involved PKI entities from end entities (EE) through an optional Local Registration Authority (LRA) and the RA up to the CA. The profile makes use of the concepts and syntax specified in CMP, CRMF, HTTP transfer for CMP, and CMP Updates. Especially CMP and CRMF are very feature-rich standards, while only a limited subset of the specified functionality is needed in many environments. Additionally, the standards are not always precise enough on how to interpret and implement the described concepts. Therefore, this document aims at tailoring and specifying in more detail how to use these concepts to implement lightweight automated certificate management.
CMP was standardized in 1999 and is implemented in several CA products. In 2005 a completely reworked and enhanced version 2 of CMP and CRMF has been published followed by a document specifying a transfer mechanism for CMP messages using http [RFC6712] in 2012.
Though CMP is a very solid and capable protocol it could be used more widely. The most important reason for not more intense application of CMP appears to be that the protocol is offering a large set of features and options but being not always precise enough and leaving room for interpretation. On the one hand, this makes CMP applicable to a very wide range of scenarios, but on the other hand a full implementation of all options is unrealistic because this would take enormous effort.
Moreover, many details of the CMP protocol have been left open or have not been specified in full preciseness. The profiles specified in Appendix D and E of [RFC4210] offer some more detailed PKI management operations. But the specific needs of highly automated scenarios for a machine-to-machine communication are not covered sufficiently.
As also 3GPP and UNISIG already put across, profiling is a way of coping with the challenges mentioned above. To profile means to take advantage of the strengths of the given protocol, while explicitly narrowing down the options it provides to exactly those needed for the purpose(s) at hand and eliminating all identified ambiguities. In this way all the general and applicable aspects of the protocol can be taken over and only the peculiarities of the target scenario need to be dealt with specifically.
Doing such a profiling for a new target environment can be a high effort because the range of available options needs to be well understood and the selected options need to be consistent with each other and with the intended usage scenario. Since most industrial PKI management use cases typically have much in common it is worth sharing this effort, which is the aim of this document. Other standardization bodies can then reference the needed PKI management operations from this document and do not need to come up with individual profiles.
The profiles specified in Appendix D and E of CMP have been developed in particular to manage certificates of human end entities. With the evolution of distributed systems and client-server architectures, certificates for machines and applications on them have become widely used. This trend has strengthened even more in emerging industrial and IoT scenarios. CMP is sufficiently flexible to support these very well.
Today's IT security architectures for industrial solutions typically use certificates for endpoint authentication within protocols like IPSec, TLS, or SSH. Therefore, the security of these architectures highly relies upon the security and availability of the implemented certificate management procedures.
Due to increasing security in operational networks as well as availability requirements, especially on critical infrastructures and systems with a high volume of certificates, a state-of-the-art certificate management must be constantly available and cost-efficient, which calls for high automation and reliability. The NIST Cyber Security Framework also refers to proper processes for issuance, management, verification, revocation, and audit for authorized devices, users and processes involving identity and credential management. Such PKI operation according to commonly accepted best practices is also required in IEC 62443-3-3 for security level 2 up to security level 4.
Further challenges in many industrial systems are network segmentation and asynchronous communication, where PKI operation is often not deployed on-site but in a more protected environment of a data center or trust center. Certificate management must be able to cope with such network architectures. CMP offers the required flexibility and functionality, namely self-contained messages, efficient polling, and support for asynchronous message transfer with end-to-end security.
As already stated, CMP contains profiles with mandatory and optional transactions in the Appendixes D and E of [RFC4210]. Those profiles focus on management of human user certificates and do only partly address the specific needs for certificate management automation for unattended machine or application-oriented end entities.
[RFC4210] specifies in Appendix D the following mandatory PKI management operations (all require support of, in the meantime outdated, algorithms, e.g., SHA-1 and 3-DES; all operations may enroll up to two certificates, one for a locally generated and another optional one for a centrally generated key pair; all require use of certConf/PKIConf messages for confirmation):
Due to the two certificates that may be enrolled and the shared secret based authentication, these PKI management operations focus more on the enrollment of human users at a PKI.
[RFC4210] specifies in Appendix E the following optional PKI management operations (all require support of, in the meantime outdated, algorithms, e.g., SHA-1 and 3-DES):
Both Appendixes focus on EE to CA/RA PKI management operations and do not address further profiling of RA to CA communication as typically used for full backend automation.
3GPP makes use of CMP in its Technical Specification 133 310 for automatic management of IPSec certificates in UMTS, LTE, and 5G backbone networks. Since 2010 a dedicated CMP profile for initial certificate enrollment and update operations between EE and RA/CA is specified in that document.
UNISIG has included a CMP profile for certificate enrollment in the subset 137 specifying the ETRAM/ECTS on-line key management for train control systems in 2015.
Both standardization bodies use CMP, CRMF, and HTTP transfer for CMP to add tailored means for automated PKI management operations for unattended machine or application-oriented end entities.
The profile specified in this document is compatible with CMP Appendixes D and E (PKI Management Message Profiles), with the following exceptions:
The profile specified in this document is compatible with the CMP profile for UMTS, LTE, and 5G network domain security and authentication framework [ETSI-3GPP], except that:
The profile specified in this document is compatible with the CMP profile for on-line key management in rail networks as specified in UNISIG subset-137, except that:
This document specifies requirements on generating PKI management messages on the sender side. It does not specify strictness of verification on the receiving side and how in detail to handle error cases.
Especially on the EE side this profile aims at a lightweight protocol that can be implemented on more constrained devices. On the side of the central PKI management entities the profile accepts higher resources needed.
For the sake of robustness and preservation of security properties implementations should, as far as security is not affected, adhere to Postel's law: "Be conservative in what you do, be liberal in what you accept from others" (often reworded as: "Be conservative in what you send, be liberal in what you accept").
When in Section 4, Section 5, and Section 6 a field of the ASN.1 syntax as defined in RFC 4210 and RFC 4211 is not explicitly specified, it SHOULD not be used by the sending entity. The receiving entity MUST NOT require its absence and if present MUST gracefully handle its presence.
Section 3 introduces the general PKI architecture and approach to certificate management using CMP that is assumed in this document. Then it enlists the PKI management opertations specified in this document and describes them in general words. The list of supported PKI management operations is divided into mandatory, recommended, and optional ones.
Section 4 profiles the CMP message header, protection, and extraCerts section as they are general elements of CMP messages.
Section 5 profiles the exchange of CMP messages between an EE and the first PKI management entities. There are various flavors of certificate enrollment requests optionally with polling, revocation, error handling, and general support PKI management operations.
Section 6 profiles the exchange between PKI management entities. These are in the first place the forwarding of messages coming from or going to an EE. This includes also initiating delayed delivery of messages, which involves polling. Additionally, it specifies PKI management operations where a PKI management entity manages certificates on behalf of an EE or for itself.
Section 7 outlines different mechanisms for CMP message transfer, namely http-based transfer as already specified in [RFC6712], using an additional TLS layer, or offline file-based transport. CoAP and piggybacking CMP messages on other protocols is out of scope and left for further documents.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.
In this document, these words will appear with that interpretation only when in ALL CAPS. Lower case use of these words are not to be interpreted as carrying significance described in RFC 2119.
Technical terminology is used in conformance with RFC 4210, RFC 4211, RFC 5280, and IEEE 802.1AR. The following key words are used:
The following terminology is reused from RFC 4210 and used as follows:
Typically, a machine EE will be equipped with a manufacturer issued certificate during production. Such a manufacturer issued certificate is installed during production to identify the device throughout its lifetime. This manufacturer certificate can be used to protect the initial enrollment of operational certificates after installation of the EE in a plant or industrial network. An operational certificate is issued by the owner or operator of the device to identify the device during operation, e.g., within a security protocol like IPSec, TLS, or SSH. In IEEE 802.1AR a manufacturer certificate is called IDevID certificate and an operational certificate is called LDevID certificate.
All certificate management transactions specified in this document are initiated by the EE. The EE creates a CMP request message, protects it using its manufacturer or operational certificate, if available, and sends it to its locally reachable PKI component. This PKI component may be an LRA, RA, or the CA, which checks the request, responds to it itself, or forwards the request upstream to the next PKI component. In case an (L)RA changes the CMP request message header or body or wants to prove a successful verification or authorization, it can apply a protection of its own. Especially the communication between an LRA and RA can be performed synchronously or asynchronously. Synchronous communication describes a timely uninterrupted communication between two communication partners, while asynchronous communication is not performed in a timely consistent manner, e.g., because of a delayed message delivery.
+-----+ +-----+ +-----+ +-----+
| | | | | | | |
| EE |<---------->| LRA |<-------------->| RA |<---------->| CA |
| | | | | | | |
+-----+ +-----+ +-----+ +-----+
synchronous (a)synchronous (a)synchronous
+----connection----+------connection------+----connection----+
on site at operators service partner
+----------plant---------+-----backend services-----+-trust center-+
Figure 1: Certificate management on site
In operation environments a layered LRA-RA-CA architecture can be deployed, e.g., with LRAs bundling requests from multiple EEs at dedicated locations and one (or more than one) central RA aggregating the requests from multiple LRAs. Every (L)RA in this scenario will have its own dedicated certificate containing an extended key usage as specified in CMP Updates and private key allowing it to protect CMP messages it processes (CMP signing key/certificate). The figure above shows an architecture using one LRA and one RA. It is also possible to have only an RA or multiple LRAs and/or RAs. Depending on the network infrastructure, the communication between different PKI management entites may be synchronous online-communication, delayed asynchronous communication, or even offline file transfer.
This profile focusses on specifying the pull model, where the EE always requests a specific PKI management operation. CMP response messages, especially in case of central key generation, as described in Section 5.1.6, could also be used proactively to implement the push model towards the EE.
Third-party CAs typically implement different variants of CMP or even use proprietary interfaces for certificate management. Therefore, the LRA or the RA may need to adapt the exchanged CMP messages to the flavor of communication required by the CA.
Section 4 specifies the generic parts of the CMP messages as used later in Section 5 and Section 6.
Following the outlined scope from Section 2.5, this section gives a brief overview of the PKI management operations specified in Section 5 and Section 6 and points out, whether an implementation by compliant EE or PKI management entites is mandatory, recommended or optional.
The mandatory PKI management operations in this document shall limit the overhead of certificate management for more constrained devices to the most crucial types of operations.
Section 5 - End Entity focused PKI management operations
Section 6 - LRA and RA focused PKI management operations
Additional recommended PKI management operations shall support some more complex scenarios, that are considered as beneficial for environments with more specific boundary conditions.
Section 5 - End Entity focused PKI management operations
< TBD: There still some discussion ongoing if this should be recommended or optional. >
Section 6 - LRA and RA focused PKI management operations
The optional PKI management operations support specific requirements seen only in a subset of environments.
Section 5 - End Entity focused PKI management operations
Section 6 - LRA and RA focused PKI management operations
On different links between PKI entities, e.g., EE<->RA and RA<->CA, different transport MAY be used. As CMP has only very limited requirement regarding the mechanisms used for message transport and in different environments different transport mechanisms are supported, e.g. HTTP, CoAP, or even offline files based, this document requires no specific transport protocol to be supported by all conforming implementations.
HTTP transfer is RECOMMENDED to use for all PKI entities, but there is no transport specified as mandatory to be flexible for devices with special constraines to choose whatever transport is suitable.
Recommended transport
Optional transport
< TBD: Motivation see Section 7.4 >
< TBD: Michael Richardson proposed to also specify a CoAP based message transport profile. If there is further support for this profile and someone volunteering to provide the necessary input for this section, I would like to add it to this document. >
To reduce redundancy in the text and to ease implementation, the contents of the header, protection, and extraCerts fields of the CMP messages used in the transactions specified in Section 5 and Section 6 are standardized to the maximum extent possible. Therefore, the generic parts of a CMP message are described centrally in this section.
As described in section 5.1 of [RFC4210], all CMP messages have the following general structure:
+--------------------------------------------+
| PKIMessage |
| +----------------------------------------+ |
| | header | |
| +----------------------------------------+ |
| +----------------------------------------+ |
| | body | |
| +----------------------------------------+ |
| +----------------------------------------+ |
| | protection (OPTIONAL) | |
| +----------------------------------------+ |
| +----------------------------------------+ |
| | extraCerts (OPTIONAL) | |
| +----------------------------------------+ |
+--------------------------------------------+
Figure 2: CMP message structure
The general contents of the message header, protection, and extraCerts fields are specified in the Section 4.1 to Section 4.3.
In case a specific CMP message needs different contents in the header, protection, or extraCerts fields, the differences are described in the respective message.
The CMP message body contains the message-specific information. It is described in the context of Section 5 and Section 6.
The behavior in case an error occurs while handling a CMP message is described in Section 6.3.
This section describes the generic header field of all CMP messages with signature-based protection. The only variations described here are in the fields recipient, transactionID, and recipNonce of the first message of a PKI management operation.
In case a message has MAC-based protection the changes are described in the respective section. The variations will affect the fields sender, protectionAlg, and senderKID.
For requirements about proper random number generation please refer to [RFC4086]. Any message-specific fields or variations are described in the respective sections of this chapter.
header
pvno REQUIRED
-- MUST be set to 2 to indicate CMP V2
sender REQUIRED
-- MUST be the subject of the protection certificate used for,
-- the certificate for the private key used to sign the message
recipient REQUIRED
-- SHOULD be the name of the intended recipient and
-- MAY be a NULL_DN if the sender does not know the DN of
-- the recipient
-- If this is the first message of a transaction: SHOULD be the
-- subject of the issuing CA certificate
-- In all other messages: SHOULD be the same name as in the
-- sender field of the previous message in this transaction
messageTime RECOMMENDED
-- MUST be the time at which the message was produced, if
-- present
protectionAlg REQUIRED
-- MUST be the algorithm identifier of the signature algorithm or
-- id-PasswordBasedMac algorithm used for calculation of the
-- protection bits
-- The signature algorithm MUST be consistent with the
-- SubjectPublicKeyInfo field of the signer's certificate
-- The hash algorithm used SHOULD be SHA-256
algorithm REQUIRED
-- MUST be the OID of the signature algorithm, like
-- sha256WithRSAEncryption or ecdsa-with-SHA256, or
-- id-PasswordBasedMac
senderKID RECOMMENDED
-- MUST be the SubjectKeyIdentifier, if available, of the
-- protection certificate
transactionID REQUIRED
-- If this is the first message of a transaction:
-- MUST be 128 bits of random data for the start of a
-- transaction to reduce the probability of having the
-- transactionID already in use at the server
-- In all other messages:
-- MUST be the value from the previous message in the same
-- transaction
senderNonce REQUIRED
-- MUST be fresh 128 random bits
recipNonce RECOMMENDED
-- If this is the first message of a transaction: SHOULD be
-- absent
-- In all other messages: MUST be present and contain the value
-- from senderNonce of the previous message in the same
-- transaction
generalInfo OPTIONAL
implicitConfirm OPTIONAL
-- The field is optional though it only applies to
-- ir/cr/kur/p10cr requests and ip/cp/kup response messages
-- Add to request messages to request omit sending certConf
-- message
-- Add to response messages to confirm omit sending certConf
-- message
ImplicitConfirmValue REQUIRED
-- ImplicitConfirmValue of the request message MUST be NULL if
-- the EE wants to request not to send a confirmation message
-- ImplicitConfirmValue MUST be set to NULL if the (L)RA/CA
-- wants to grant not sending a confirmation message
This section describes the generic protection field of all CMP messages with signature-based protection. The certificate for the private key used to sign a CMP message is called 'protection certificate'.
protection RECOMMENDED
-- MUST contain the signature calculated using the signature
-- algorithm specified in protectionAlg
Generally CMP message protection is required for CMP messages, but there are cases where protection of error messages as specified in Section 5.3 and Section 6.3 is not possible and therefore MAY be omitted.
For MAC-based protection as specified in Section 5.1.4 major differences apply as described in the respective section.
The CMP message protection provides, if available, message origin authentication and integrity protection for the CMP message header and body. The CMP message extraCerts is not covered by this protection.
NOTE: The extended key usages specified in CMP Updates can be used for authorization of a sending PKI management entity.
NOTE: The requirements for checking certificates given in [RFC5280] MUST be followed for the CMP message protection. In case the CMP signer certificates is not the CA certificate that signed the newly issued certificate, certificate status checking SHOULD be used for the CMP signer certificates of communication partners.
This section describes the generic extraCerts field of all CMP messages with signature-based protection. If extraCerts are required, recommended, or optional is specified in the respective PKI management operation.
extraCerts
-- SHOULD contain the protection certificate together with its
-- chain, if needed
-- If present, the first certificate in this field MUST
-- be the protection certificate
-- Self-signed certificates SHOULD NOT be included in
-- extraCerts and MUST NOT be trusted based on the listing in
-- extraCerts in any case
This chapter focuses on the communication of the EE and the first PKI management entities it talks to. Depending on the network and PKI solution, this will either be the LRA, the RA or the CA.
Profiles of the Certificate Management Protocol (CMP) handled in this section cover the following PKI management operations:
These operations mainly specify the message body of the CMP messages and utilize the specification of the message header, protection and extraCerts as specified in Section 5.
The behavior in case an error occurs is described in Section 5.3.
This chapter is aligned to Appendix D and Appendix E of [RFC4210]. The general rules for interpretation stated in Appendix D.1 in [RFC4210] need to be applied here, too.
This document does not mandate any specific supported algorithms like Appendix D.2 of [RFC4210], [ETSI-3GPP], and [UNISIG] do. Using the message sequences described here require agreement upon the algorithms to support and thus the algorithm identifiers for the specific target environment.
There are different approaches to request a certificate from a PKI.
These approaches differ on the one hand in the way the EE can authenticate itself to the PKI it wishes to get a new certificate from and on the other hand in its capabilities to generate a proper new key pair. The authentication means may be as follows:
Typically, such EE requests a certificate from a CA. When the PKI management entity responds with a message containing a certificate, the EE MUST reply with a confirmation message. The PKI management entity then MUST send confirmation back, closing the transaction.
The message sequences in this section allow the EE to request certification of a locally generated public-private key pair. For requirements about proper random number and key generation please refer to [RFC4086]. The EE MUST provide a signature-based proof-of-possession of the private key associated with the public key contained in the certificate request as defined by [RFC4211] section 4.1 case 3. To this end it is assumed that the private key can technically be used as signing key. The most commonly used algorithms are RSA and ECDSA, which can technically be used for signature calculation regardless of potentially intended restrictions of the key usage.
The requesting EE provides the binding of the proof-of-possession to its identity by signature-based or MAC-based protection of the CMP request message containing that POPO. The PKI management entity needs to verify whether this EE is authorized to obtain a certificate with the requested subject and other attributes and extensions. Especially when removing the protection provided by the EE and applying a new protection the PKI management entity MUST verify in particular the included proof-of-possession self-signature of the certTemplate using the public key of the requested certificate and MUST check that the EE, as authenticated by the message protection, is authorized to request a certificate with the subject as specified in the certTemplate (see Section 6.1.2).
There are several ways to install the Root CA certificate of a new PKI on an EE. The installation can be performed in an out-of-band manner, using general messages, a voucher, or other formats for enrollment, or in-band of CMP by the caPubs field in the certificate response message. In case the installation of the new root CA certificate is performed using the caPubs field, the certificate response message MUST be properly authenticated, and the sender of this message MUST be authorized to install new root CA certificates on the EE. This authorization can be indicated by using pre-shared keys for the CMP message protection.
This PKI management operation should be used by an EE to request a certificate of a new PKI using an existing certificate from an external PKI, e.g., a manufacturer certificate, to prove its identity to the new PKI. The EE already has established trust in this new PKI it is about to enroll to, e.g., by voucher exchgnge or configuration means. The initialization request message is signature-protected using the existing certificate.
Preconditions:
This PKI management operation is like that given in [RFC4210] Appendix E.7.
Message flow:
Step# EE PKI management entity
1 format ir
2 -> ir ->
3 handle, re-protect or
forward ir
4 format or receive ip
5 possibly grant implicit
confirm
6 <- ip <-
7 handle ip
8 In case of status
"rejection" in the
ip message, no certConf
and pkiConf are sent
9 format certConf (optional)
10 -> certConf ->
11 handle, re-protect or
forward certConf
12 format or receive PKIConf
13 <- pkiConf <-
14 handle pkiConf (optional)
For this PKI management operation the EE MUST include exactly one single CertReqMsg in the ir. If more certificates are required, further requests MUST be sent using separate CMP messages. If the EE wants to omit sending a certificate confirmation message after receiving the ip to reduce the number of protocol messages exchanged in this PKI management operation, it MUST request this by setting the implicitControlValue in the ir to NULL.
If the CA accepts the certificate request it MUST return the new certificate in the certifiedKeyPair field of the ip message. If the EE requested to omit sending a certConf message after receiving the ip, the PKI management entity MAY confirm it by also setting the implicitControlValue to NULL or MAY rejects it by omitting the implicitConfirm field in the ip.
If the EE did not request implicit confirmation or the request was not granted by the PKI management entity the confirmation as follows MUST be performed. If the EE successfully receives the certificate and accepts it, the EE MUST send a certConf message, which MUST be answered by the PKI management entity with a pkiConf message. If the PKI management entity does not receive the expected certConf message in time it MUST handle this like a rejection by the EE.
If the certificate request was refused by the CA, the PKI management entity must return an ip message containing the status code "rejection" and no certifiedKeyPair field. Such an ip message MUST NOT be followed by the certConf and pkiConf messages.
Detailed message description:
Certification Request -- ir
Field Value
header
-- As described in section 4.1
body
-- The request of the EE for a new certificate
ir REQUIRED
-- MUST be exactly one CertReqMsg
-- If more certificates are required, further requests MUST be
-- packaged in separate PKI Messages
certReq REQUIRED
certReqId REQUIRED
-- MUST be set to 0
certTemplate REQUIRED
version OPTIONAL
-- MUST be 2 if supplied.
subject REQUIRED
-- MUST contain the suggested subject name of the EE
-- certificate
publicKey REQUIRED
algorithm REQUIRED
-- MUST include the subject public key algorithm ID and value
-- In case a central key generation is requested, this field
-- contains the algorithm and parameter preferences of the
-- requesting entity regarding the to-be-generated key pair
subjectPublicKey REQUIRED
-- MUST contain the public key to be included into the requested
-- certificate in case of local key-generation
-- MUST contain a zero-length BIT STRING in case a central key
-- generation is requested
-- MUST include the subject public key algorithm ID and value
extensions OPTIONAL
-- MAY include end-entity-specific X.509 extensions of the
-- requested certificate like subject alternative name,
-- key usage, and extended key usage
Popo REQUIRED
POPOSigningKey OPTIONAL
-- MUST be used in case subjectPublicKey contains a public key
-- MUST be absent in case subjectPublicKey contains a
-- zero-length BIT STRING
poposkInput PROHIBITED
-- MUST NOT be used because subject and publicKey are both
-- present in the certTemplate
algorithmIdentifier REQUIRED
-- The signature algorithm MUST be consistent with the
-- publicKey field of the certTemplate
-- The hash algorithm used SHOULD be SHA-256
signature REQUIRED
-- MUST be the signature computed over the DER-encoded
-- certTemplate
protection REQUIRED
-- As described in section 4.2
extraCerts REQUIRED
-- As described in section 4.3
Certification Response -- ip
Field Value
header
-- As described in section 4.1
body
-- The response of the CA to the request as appropriate
ip REQUIRED
caPubs OPTIONAL
-- MAY be used
-- If used it MUST contain only the root certificate of the
-- certificate contained in certOrEncCert
response REQUIRED
-- MUST be exactly one CertResponse
certReqId REQUIRED
-- MUST be set to 0
status REQUIRED
-- PKIStatusInfo structure MUST be present
status REQUIRED
-- positive values allowed: "accepted", "grantedWithMods"
-- negative values allowed: "rejection"
-- In case of rejection certConf and pkiConf messages MUST NOT
-- be sent
statusString OPTIONAL
-- MAY be any human-readable text for debugging, logging or to
-- display in a GUI
failInfo OPTIONAL
-- MUST be present if status is "rejection" and in this case
-- the transaction MUST be terminated
-- MUST be absent if the status is "accepted" or
-- "grantedWithMods"
certifiedKeyPair OPTIONAL
-- MUST be present if status is "accepted" or "grantedWithMods"
-- MUST be absent if status is "rejection"
certOrEncCert REQUIRED
-- MUST be present when certifiedKeyPair is present
certificate REQUIRED
-- MUST be present when certifiedKeyPair is present
-- MUST contain the newly enrolled X.509 certificate
privateKey OPTIONAL
-- MUST be absent in case of local key-generation
-- MUST contain the encrypted private key in an EnvelopedData
-- structure as specified in section 5.1.5 in case the private
-- key was generated centrally
protection REQUIRED
-- As described in section 4.2
extraCerts REQUIRED
-- As described in section 4.3
-- MUST contain the chain of the certificate present in
-- certOrEncCert
-- Duplicate certificates MAY be omitted
Certificate Confirmation -- certConf
Field Value
header
-- As described in section 4.1
body
-- The message of the EE sends confirmation to the PKI
-- management entity to accept or reject the issued certificates
certConf REQUIRED
-- MUST be exactly one CertStatus
CertStatus REQUIRED
certHash REQUIRED
-- MUST be the hash of the certificate, using the same hash
-- algorithm as used to create the certificate signature
certReqId REQUIRED
-- MUST be set to 0
status RECOMMENDED
-- PKIStatusInfo structure SHOULD be present
-- Omission indicates acceptance of the indicated certificate
status REQUIRED
-- positive values allowed: "accepted"
-- negative values allowed: "rejection"
statusString OPTIONAL
-- MAY be any human-readable text for debugging, logging, or to
-- display in a GUI
failInfo OPTIONAL
-- MUST be present if status is "rejection"
-- MUST be absent if the status is "accepted"
protection REQUIRED
-- As described in section 4.2
-- MUST use the same certificate as for protection of the ir
extraCerts RECOMMENDED
-- SHOULD contain the protection certificate together with its
-- chain, but MAY be omitted if the message size is critical and
-- the PKI management entity did cash the extraCerts from the ir
-- If present, the first certificate in this field MUST be the
-- certificate used for signing this message
-- Self-signed certificates SHOULD NOT be included in
-- extraCerts and
-- MUST NOT be trusted based on the listing in extraCerts in
-- any case
PKI Confirmation -- pkiConf
Field Value
header
-- As described in section 4.1
body
pkiConf REQUIRED
-- The content of this field MUST be NULL
protection REQUIRED
-- As described in section 4.2
-- SHOULD use the same certificate as for protection of the ip
extraCerts RECOMMENDED
-- SHOULD contain the protection certificate together with its
-- chain, but MAY be omitted if the message size is critical and
-- the PKI management entity did cash the extraCerts from the ip
-- If present, the first certificate in this field MUST be the
-- certificate used for signing this message
-- Self-signed certificates SHOULD NOT be included in extraCerts
-- and
-- MUST NOT be trusted based on the listing in extraCerts in
-- any case
< TBD: In case the PKI is already trusted the cr/cp messages could be used instead of ir/ip. It needs to be decided, whether an additional section should be added here, or the previous section should be extended to also cover this use case. >
This PKI management operation should be used by an EE to request an update of one of the certificates it already has and that is still valid. The EE uses the certificate it wishes to update to prove its identity and possession of the private key for the certificate to be updated to the PKI. Therefore, the key update request message is signed using the certificate that is to be updated.
The general message flow for this PKI management operation is the same as given in Section 5.1.1.
Preconditions:
The message sequence for this PKI management operation is like that given in [RFC4210] Appendix D.6.
The message sequence for this PKI management operation is identical to that given in Section 5.1.1, with the following changes:
As part of the certReq structure of the kur the control is added right after the certTemplate.
controls
type RECOMMENDED
-- MUST be the value id-regCtrl-oldCertID, if present
value
issuer REQUIRED
serialNumber REQUIRED
-- MUST contain the issuer and serialNumber of the certificate
-- to be updated
This PKI management operation should be used by an EE to request a certificate of a new PKI without having a certificate to prove its identity to the target PKI, but there is a shared secret established between the EE and the PKI. Therefore, the initialization request is MAC-protected using this shared secret. The PKI management entity checking the MAC-protection SHOULD replace this protection according to Section 6.1.2 in case the next hop does not know the shared secret.
For requirements with regard to proper random number and key generation please refer to [RFC4086].
The general message flow for this PKI management operation is the same as given in Section 5.1.1.
Preconditions:
The message sequence for this PKI management operation is like that given in [RFC4210] Appendix D.4.
The message sequence for this PKI management operation is identical to that given in Section 5.1.1, with the following changes:
Part of the protectionAlg structure, where the algorithm identifier MUST be id-PasswordBasedMac, is a PBMParameter sequence. The fields of PBMParameter SHOULD remain constant for message protection throughout this PKI management operation to reduce the computational overhead.
PBMParameter REQUIRED
salt REQUIRED
-- MUST be the random value to salt the secret key
owf REQUIRED
-- MUST be the algorithm identifier for the one-way function
-- used
-- The one-way function SHA-1 MUST be supported due to
-- [RFC4211] requirements, but SHOULD NOT be used any more
-- SHA-256 SHOULD be used instead
iterationCount REQUIRED
-- MUST be a limited number of times the one-way function is
-- applied
-- To prevent brute force and dictionary attacks a reasonable
-- high number SHOULD be used
mac REQUIRED
-- MUST be the algorithm identifier of the MAC algorithm used
-- The MAC function HMAC-SHA1 MUST be supported due to
-- [RFC4211] requirements, but SHOULD NOT be used any more
-- HMAC-SHA-256 SHOULD be used instead
This PKI management operation should be used by an EE to request a certificate of a legacy PKI only capable to process PKCS#10 certification requests. The EE can prove its identity to the target PKI by using various protection means as described in Section 5.1.1 or Section 5.1.4.
In contrast to the other PKI management operations described in Section 5.1, this transaction uses PKCS#10 instead of CRMF for the certificate request for compatibility reasons with legacy CA systems that require a PKCS#10 certificate request and cannot process CRMF requests. In such case the PKI management entity must extract the PKCS#10 certificate request from the p10cr and provides it separately to the CA.
The general message flow for this PKI management operation is the same as given in Section 5.1.1, but the public key is contained in the subjectPKInfo of the PKCS#10 certificate request.
Preconditions:
The message sequence for this PKI management operation is identical to that given in Section 5.1.1, with the following changes:
Detailed description of the p10cr message:
Certification Request -- p10cr
Field Value
header
-- As described in section 4.1
body
-- The request of the EE for a new certificate using a PKCS#10
-- certificate request
p10cr REQUIRED
CertificationRequestInfo REQUIRED
version REQUIRED
-- MUST be set to 0 to indicate PKCS#10 V1.7
subject REQUIRED
-- MUST contain the suggested subject name of the EE
subjectPKInfo REQUIRED
algorithm REQUIRED
-- MUST include the subject public key algorithm ID
subjectPublicKey REQUIRED
-- MUST include the subject public key algorithm value
attributes OPTIONAL
-- MAY contain a set of end-entity-specific attributes or X.509
-- extensions to be included in the requested certificate or used
-- otherwise
signatureAlgorithm REQUIRED
-- The signature algorithm MUST be consistent with the
-- subjectPKInfo field. The hash algorithm used SHOULD be SHA-256
signature REQUIRED
-- MUST containing the self-signature for proof-of-possession
protection REQUIRED
-- As described in section 4.2
extraCerts REQUIRED
-- As described in section 4.3
This functional extension can be applied in combination with certificate enrollment as described in Section 5.1.1 and Section 5.1.4. The functional extension can be used in case an EE is not able or is not willing to generate its new public-private key pair itself. It is a matter of the local implementation which PKI management entity will perform the key generation. This entity MUST have a certificate containing the additional extended key usage extension id-kp-cmcKGA to be identified by the EE as a legitimate key-generation authority. In case the PKI management entity generated the new key pair for the EE, it can use Section 5.1.1 to Section 5.1.4 to request the certificate for this key pair as usual.
Generally speaking, in a machine-to-machine scenario it is strongly preferable to generate public-private key pairs locally at the EE. Together with proof-of-possession of the private key in the certification request, this is to make sure that only the entity identified in the newly issued certificate is the only entity who ever hold the private key.
There are some cases where an EE is not able or not willing to locally generate the new key pair. Reasons for this may be the following:
Note: Good random numbers are not only needed for key generation, but also for session keys and nonces in any security protocol. Therefore, we believe that a decent security architecture should anyways support good random number generation on the EE side or provide enough entropy for the RNG seed during manufacturing to guarantee good initial pseudo-random number generation.
Note: As key generation can be performed in advance to the certificate enrollment communication, it is typical not time critical.
Note: Besides the initial enrollment right after the very first bootup of the device, where entropy available on the device may be insufficient, we do not see any good reason for central key generation.
Note: As mentioned in Section 3.1 central key generation may be required in a push model, where the certificate response message is transferred by the PKI management entity to the EE without receiving a previous request message.
If the EE wishes to request central key generation, it MUST fill the subjectPublicKey field in the certTemplate structure of the request message with a zero-length BIT STRING. This indicates to the PKI management entity that a new key pair shall be generated centrally on behalf of the EE.
Note: As the protection of centrally generated keys in the response message is being extended from EncryptedValue to EncryptedKey by CMP Updates also the alternative EnvelopedData can be used. In CRMF Section 2.1.9 the use of EncryptedValue has been deprecated in favor of the EnvelopedData structure. Therefore, this profile specifies using EnvelopedData as specified in CMS Section 6 to offer more crypto agility.
+------------------------------+
| EnvelopedData |
| [RFC5652] section 6 |
| +--------------------------+ |
| | SignedData | |
| | [RFC5652] section 5 | |
| | +----------------------+ | |
| | | privateKey | | |
| | | OCTET STRING | | |
| | +----------------------+ | |
| +--------------------------+ |
+------------------------------+
Figure 3: Encrypted private key container
The PKI management entity delivers the private key in the privateKey field in the certifiedKeyPair structure of the response message also containing the newly issued certificate.
The private key MUST be wrapped in a SignedData structure, as specified in CMS Section 5, signed by the KGA generating the key pair. The signature MUST be performed using a CMP signer certificate asserting the extended key usage kp-id-cmpKGA as described in CMP Updates to show the authorization to generate key pairs on behalf of an EE.
This SignedData structure MUST be wrapped in an EnvelopedData structure, as specified in CMS Section 6, encrypting it using a newly generated symmetric content-encryption key.
Note: Instead of the specification in CMP Appendix D 4.4 this content-encryption key is not generated on the EE side. As we just mentioned, central key generation should only be used in this profile in case of lack of randomness on the EE.
As part of the EnvelopedData structure this content-encryption key MUST be securely provided to the EE using one of three key management techniques. The choice of the key management technique to be used by the PKI management entity depends on the authentication mechanism the EE choose to protect the request message, see CMP Updates section 3.4 for more details on which key management technique to use.
The key agreement key management technique can be supported by most signature algorithms, as key transport key management technique can only be supported by a very limited number of algorithms. The symmetric key-encryption key management technique shall only be used in combination with MAC protection, which is a side-line in this document. Therefore, if central key generation is supported, the support ofthe key agreement key management technique is REQUIRED and the support of key transport and symmetric key-encryption key management techniques are OPTIONAL.
For encrypting the SignedData structure containing the private key a fresh content-encryption key MUST be generated with enough entropy with regard to the used symmetric encryption algorithm.
Note: Depending on the lifetime of the certificate and the criticality of the generated private key, it is advisable to use the strongest available symmetric encryption algorithm. Therefore, this specification recommends using at least AES-256.
The detailed description of the privateKey field looks like this:
privateKey OPTIONAL
-- MUST be an envelopedData structure as specified in
-- CMS [RFC5652] section 6
version REQUIRED
-- MUST be set to 2
recipientInfos REQUIRED
-- MUST be exactly one RecipientInfo
recipientInfo REQUIRED
-- MUST be either KEKRecipientInfo (see section 5.1.5.1),
-- KeyAgreeRecipientInfo (see section 5.1.5.2), or
-- KeyTransRecipientInfo (see section 5.1.5.3) is used
-- If central key generation is supported, support of
-- KEKRecipientInfo is REQUIRED and support of
-- KeyAgreeRecipientInfo and KeyTransRecipientInfo is OPTIONAL
encryptedContentInfo
REQUIRED
contentType REQUIRED
-- MUST be id-signedData
contentEncryptionAlgorithm
REQUIRED
-- MUST be the algorithm identifier of the symmetric
-- content-encryption algorithm used
-- As private keys need long-term protection, the use of AES-256
-- or a stronger symmetric algorithm is RECOMMENDED
encryptedContent REQUIRED
-- MUST be the encrypted signedData structure as specified in
-- CMS [RFC5652] section 5
version REQUIRED
-- MUST be set to 3
digestAlgorithms
REQUIRED
-- MUST be exactly one digestAlgorithm identifier
digestAlgorithmIdentifier
REQUIRED
-- MUST be the OID of the digest algorithm used for generating
-- the signature
-- The hash algorithm used SHOULD be SHA-256
encapContentInfo
REQUIRED
-- MUST be the content that is to be signed
contentType REQUIRED
-- MUST be id-data
content REQUIRED
-- MUST be the privateKey as OCTET STRING
certificates REQUIRED
-- SHOULD contain the certificate, for the private key used
-- to sign the content, together with its chain
-- If present, the first certificate in this field MUST
-- be the certificate used for signing this content
-- Self-signed certificates SHOULD NOT be included
-- and MUST NOT be trusted based on the listing in any case
crls OPTIONAL
-- MAY be present to provide status information on the signer or
-- its CA certificates
signerInfos REQUIRED
-- MUST be exactly one signerInfo
version REQUIRED
-- MUST be set to 3
sid REQUIRED
subjectKeyIdentifier
REQUIRED
-- MUST be the subjectKeyIdentifier of the signer's certificate
digest algorithm
REQUIRED
-- MUST be the same OID as in digest algorithm
signatureAlgorithm
REQUIRED
-- MUST be the algorithm identifier of the signature algorithm
-- used for calculation of the signature bits,
-- like sha256WithRSAEncryption or ecdsa-with-SHA256
-- The signature algorithm MUST be consistent with the
-- SubjectPublicKeyInfo field of the signer's certificate
signature REQUIRED
-- MUST be the result of the digital signature generation
This key management technique can be applied in combination with the PKI management operation specified in Section 5.1.4 using MAC protected CMP messages. The shared secret used for the MAC protection MUST also be used for the encryption of the content-encryption key but with a different seed in the PBMParameter sequence. To use this key management technique the KEKRecipientInfo structure MUST be used in the contentInfo field.
The KEKRecipientInfo structure included into the envelopedData structure is specified in CMS Section 6.2.3.
The detailed description of the KEKRecipientInfo structure looks like this:
recipientInfo REQUIRED
-- MUST be KEKRecipientInfo as specified in
-- CMS section 6.2.3 [RFC5652]
version REQUIRED
-- MUST be set to 4
kekid REQUIRED
keyIdentifier REQUIRED
-- MUST contain the same value as the senderKID in the respective
-- request messages
keyEncryptionAlgorithm
REQUIRED
-- MUST be id-PasswordBasedMac
PBMParameter REQUIRED
salt REQUIRED
-- MUST be the random value to salt the secret key
-- MUST be a different value than used in the PBMParameter
-- data structure of the CMP message protection in the
-- header of this message
owf REQUIRED
-- MUST be the same value than used in the PBMParameter
-- data structure in the header of this message
iterationCount
REQUIRED
-- MUST be a limited number of times the OWF is applied
-- To prevent brute force and dictionary attacks a reasonable
-- high number SHOULD be used
mac REQUIRED
-- MUST be the same as in the contentEncryptionAlgorithm field
encryptedKey REQUIRED
-- MUST be the encrypted content-encryption key
< TBD: To make use of a different symmetric keys for encrypting the private key and for MAC-protection of the CMP message, we derive another key using the same PBMParameter structure from CMP, even though from the perspective of field names, it is not intended to be used for deriving encryption keys. Does anyone sees a better solution here? >
This key management technique can be applied in combination with the PKI management operations specified in Section 5.1.1 to Section 5.1.3 using signature-based protected CMP messages. The public key of the EE certificate used for the signature-based protection of the request message MUST also be used for the Ephemeral-Static Diffie-Hellmann key establishment of the content-encryption key. To use this key management technique the KeyAgreeRecipientInfo structure MUST be used in the contentInfo field.
The KeyAgreeRecipientInfo structure included into the envelopedData structure is specified in CMS Section 6.2.2.
The detailed description of the KeyAgreeRecipientInfo structure looks like this:
recipientInfo REQUIRED
-- MUST be KeyAgreeRecipientInfo as specified in
version REQUIRED
-- MUST be set to 3
originator REQUIRED
-- MUST contain the originatorKey sequence
algorithm REQUIRED
-- MUST be the algorithm identifier of the
-- static-ephemeral Diffie-Hellmann algorithm
publicKey REQUIRED
-- MUST be the ephemeral public key of the sending party
ukm OPTIONAL
-- MUST be used when 1-pass ECMQV is used
keyEncryptionAlgorithm
REQUIRED
-- MUST be the same as in the contentEncryptionAlgorithm field
recipientEncryptedKeys
REQUIRED
-- MUST be exactly one recipientEncryptedKey sequence
recipientEncryptedKey
REQUIRED
rid REQUIRED
rKeyId REQUIRED
subjectKeyID
REQUIRED
-- MUST contain the same value as the senderKID in the
-- respective request messages
encryptedKey
REQUIRED
-- MUST be the encrypted content-encryption key
This key management technique can be applied in combination with the PKI management operations specified in Section 5.1.1 to Section 5.1.3 using signature-based protected CMP messages. The public key of the EE certificate used for the signature-based protection of the request message MUST also be used for key encipherment of the content-encryption key. To use this key management technique the KeyTransRecipientInfo structure MUST be used in the contentInfo field.
The KeyTransRecipientInfo structure included into the envelopedData structure is specified in CMS Section 6.2.1.
The detailed description of the KeyTransRecipientInfo structure looks like this:
recipientInfo REQUIRED
-- MUST be KeyTransRecipientInfo as specified in
-- CMS section 6.2.1 [RFC5652]
version REQUIRED
-- MUST be set to 2
rid REQUIRED
subjectKeyIdentifier
REQUIRED
-- MUST contain the same value as the senderKID in the respective
-- request messages
keyEncryptionAlgorithm
REQUIRED
-- MUST contain the key encryption algorithm identifier used for
-- public key encryption
encryptedKey REQUIRED
-- MUST be the encrypted content-encryption key
This functional extension can be applied in combination with certificate enrollment as described in Section 5.1.1 to Section 5.1.5. The functional extension can be used in case a PKI management entity cannot respond to the certificate request in a timely manner, e.g., due to offline upstream communication or required registration officer interaction. Depending on the PKI architecture, it is not necessary that the PKI management entity directly communicating with the EE initiates the delayed enrollment.
The PKI management entity initiating the delayed enrollment MUST include the status "waiting" in the response and this response MUST NOT contain a newly issued certificate. When receiving a response with status "waiting" the EE MUST send a poll request to the PKI management entity. The PKI management entity that initiated the delayed enrollment MUST answers with a poll response containing a checkAfter time. This value indicates the minimum number of seconds that must elapse before the EE sends another poll request. As soon as the PKI management entity can provide the final response message for the initial request of the EE, it MUST provide this in response to a poll request. After receiving this response, the EE can continue the original PKI management operation as described in the respective section of this document, e.g., send a certConf message.
Typically, intermediate PKI management entities SHOULD NOT change the sender and recipient nonce even in case an intermediate PKI management entity modifies a request or a response message. In the special case of polling between EE and LRA with offline transport between an LRA and RA, see Section 6.1.4, an exception occurs. The EE and LRA exchange pollReq and pollRep messages handle the nonce words as described. When, after pollRep, the final response from the CA arrives at the LRA, the next response will contain the recipientNonce set to the value of the senderNonce in the original request message (copied by the CA). The LRA needs to replace the recipientNonce in this case with the senderNonce of the last pollReq because the EE will validate it in this way.
Message flow:
Step# EE PKI management entity
1 format ir/cr/p10cr/kur
As described in the
respective section
in this document
2 ->ir/cr/p10cr/kur->
3 handle request as described
in the respective section
in this document
4 in case no immediate final
response is possible,
receive or format ip, cp
or kup message containing
status "waiting"
5 <- ip/cp/kup <-
6 handle ip/cp/kup
7 format pollReq
8 -> pollReq ->
9 handle, re-protect or
forward pollReq
10 in case the requested
certificate or a
corresponding response
message is available,
receive or format ip, cp,
or kup containing the
issued certificate, or
format or receive pollRep
with appropriate
checkAfter value
11 <- pollRep <-
12 handle pollRep
13 let checkAfter
time elapse
14 continue with line 7
Detailed description of the first ip/cp/kup:
Response with status 'waiting' -- ip/cp/kup
Field Value
header
-- MUST contain a header as described for the first response
-- message of the respective PKI management operation
body
-- The response of the PKI management entity to the request in
-- case no immediate appropriate response can be sent
ip/cp/kup REQUIRED
response REQUIRED
-- MUST be exactly one CertResponse
certReqId REQUIRED
-- MUST be set to 0
status REQUIRED
-- PKIStatusInfo structure MUST be present
status REQUIRED
-- MUST be set to "waiting"
statusString OPTIONAL
-- MAY be any human-readable text for debugging, logging or to
-- display in a GUI
failInfo PROHIBITED
certifiedKeyPair PROHIBITED
protection REQUIRED
-- MUST contain protection as described for the first response
-- message of the respective PKI management operation, but
-- MUST use the protection key of the PKI management entity
-- initiating the delayed enrollment and creating this response
-- message
extraCerts REQUIRED
-- MUST contain certificates as described for the first response
-- message of the respective PKI management operation.
-- As no new certificate is issued yet, no respective certificate
-- chain is included
Polling Request -- pollReq
Field Value
header
-- MUST contain a header as described for the certConf message
-- of the respective PKI management operation
body
-- The message of the EE asks for the final response or for a
-- time to check again
pollReq REQUIRED
certReqId REQUIRED
-- MUST be exactly one value
-- MUST be set to 0
protection REQUIRED
-- MUST contain protection as described for the certConf message
-- of the respective PKI management operation
extraCerts OPTIONAL
-- If present, it MUST contain certificates as described for the
-- certConf message of the respective PKI management operation
Polling Response -- pollRep
Field Value
header
-- MUST contain a header as described for the pkiConf message
-- of the respective PKI management operation
body pollRep
-- The message indicated the time to after which the EE may
-- send another pollReq messaged for this transaction
pollRep REQUIRED
-- MUST be exactly one set of the following values
certReqId REQUIRED
-- MUST be set to 0
checkAfter REQUIRED
-- time in seconds to elapse before a new pollReq may be sent by
-- the EE
protection REQUIRED
-- MUST contain protection as described for the pkiConf message
-- of the respective profile, but
-- MUST use the protection key of the PKI management entity that
-- initiated the delayed enrollment and is creating this response
-- message
extraCerts OPTIONAL
-- If present, it MUST contain certificates as described for the
-- pkiConf message of the respective PKI management operation.
Final response -- ip/cp/kup
Field Value
header
-- MUST contain a header as described for the first
-- response message of the respective PKI management operation,
-- but the recipientNonce MUST be the senderNonce of the last
-- pollReq message
body
-- The response of the PKI management entity to the initial
-- request as described in the respective PKI management
-- operation
protection REQUIRED
-- MUST contain protection as described for the first response
-- message of the respective PKI management operation, but
-- MUST use the protection key of the PKI management entity that
-- initiated the delayed enrollment and forwarding the response
-- message
extraCerts REQUIRED
-- MUST contain certificates as described for the first
-- response message of the respective PKI management operation
This PKI management operation should be used by an entity to request the revocation of a certificate. Here the revocation request is used by an EE to revoke one of its own certificates. A PKI management entity could also act as an EE to revoke one of its own certificates.
The revocation request message MUST be signed using the certificate that is to be revoked to prove the authorization to revoke to the PKI. The revocation request message is signature-protected using this certificate.
An EE requests the revocation of an own certificate at the CA that issued this certificate. The PKI management entity responds with a message that contains the status of the revocation from the CA.
Preconditions:
Message flow:
Step# EE PKI management entity
1 format rr
2 -> rr ->
3 handle, re-protect or
forward rr
4 receive rp
5 <- rp <-
6 handle rp
For this PKI management operation, the EE MUST include exactly one RevDetails structure in the rr message body. In case no error occurred the response to the rr MUST be an rp message. The PKI management entity MUST produce a rp containing a status field with a single set of values.
Detailed message description:
Revocation Request -- rr
Field Value
header
-- As described in section 4.1
body
-- The request of the EE to revoke its certificate
rr REQUIRED
-- MUST contain exactly one element of type RevDetails
-- If more revocations are desired, further requests MUST be
-- packaged in separate PKI Messages
certDetails REQUIRED
-- MUST be present and is of type CertTemplate
serialNumber REQUIRED
-- MUST contain the certificate serialNumber attribute of the
-- X.509 certificate to be revoked
issuer REQUIRED
-- MUST contain the issuer attribute of the X.509 certificate to
-- be revoked
crlEntryDetails REQUIRED
-- MUST contain exactly one reasonCode of type CRLReason (see
-- [RFC5280] section 5.3.1)
-- If the reason for this revocation is not known or shall not be
-- published the reasonCode MUST be 0 = unspecified
protection REQUIRED
-- As described in section 4.2 and the private key related to the
-- certificate to be revoked
extraCerts REQUIRED
-- As described in section 4.3
Revocation Response -- rp
Field Value
header
-- As described in section 4.1
body
-- The responds of the PKI management entity to the request as
-- appropriate
rp REQUIRED
status REQUIRED
-- MUST contain exactly one element of type PKIStatusInfo
status REQUIRED
-- positive value allowed: "accepted"
-- negative value allowed: "rejection"
statusString OPTIONAL
-- MAY be any human-readable text for debugging, logging or to
-- display in a GUI
failInfo OPTIONAL
-- MAY be present if and only if status is "rejection"
protection REQUIRED
-- As described in section 4.2
extraCerts REQUIRED
-- As described in section 4.3
This functionality should be used by an EE to report any error conditions upstream to the PKI management entity. Error reporting by a PKI management entity downstream to the EE is described in Section 6.3.
In case the error condition is related to specific details of an ip, cp, or kup response message and a confirmation is expected the error condition MUST be reported in the respective certConf message with negative contents.
General error conditions, e.g., problems with the message header, protection, or extraCerts, and negative feedback on rp, pollRep, or pkiConf messages MAY be reported in the form of an error message.
In both situations the EE reports error in the PKIStatusInfo structure of the respective message.
Depending on the PKI architecture, the PKI management entity MUST forward the error message (upstream) to the next PKI management entity and MUST terminate this PKI management operation.
The PKIStatusInfo structure is used to report errors. The PKIStatusInfo structure SHOULD consist of the following fields:
Detailed error message description:
Error Message -- error
Field Value
header
-- As described in section 4.1
body
-- The message sent by the EE or the (L)RA/CA to indicate an
-- error that occurred
error REQUIRED
pKIStatusInfo REQUIRED
status REQUIRED
-- MUST have the value "rejection"
statusString RECOMMENDED
-- SHOULD be any human-readable text for debugging, logging
-- or to display in a GUI
failInfo OPTIONAL
-- MAY be present
protection REQUIRED
-- As described in section 4.2
extraCerts OPTIONAL
-- As described in section 4.3
The following support messages offer on demand in-band transport of content that may be provided by the PKI management entity and relevant to the EE. The general messages and general response are used for this purpose. Depending on the environment, these requests may be answered by the LRA, RA, or CA.
The general message and general response transport InfoTypeAndValue structures. In addition to those infoType values defined in CMP further OIDs MAY be defined to define new PKI management operations, or general-purpose messages as needed in a specific environment.
Possible content described here address:
The PKI management operation is similar to that given in CMP Appendix E.5. In this section the general message (genm) and general response (genp) are described. The specific InfoTypeAndValue structures are described in the following sections.
The behavior in case an error occurs is described in Section 5.3.
Message flow:
Step# EE PKI management entity
1 format genm
2 -> genm ->
3 handle, re-protect or
forward genm
4 format or receive genp
5 <- genp <-
6 handle genp
Detailed message description:
General Message -- genm
Field Value
header
-- As described in section 4.1
body
-- The request of the EE to receive information
genm REQUIRED
-- MUST contain exactly one element of type
-- InfoTypeAndValue
infoType REQUIRED
-- MUST be the OID identifying the specific PKI
-- management operation described below
infoValue OPTIONAL
-- MUST be as described in the specific PKI
-- management operation described below
protection REQUIRED
-- As described in section 4.2
extraCerts REQUIRED
-- As described in section 4.3
General Response -- genp
Field Value
header
-- As described in section 4.1
body
-- The response of the PKI management entity to the
-- information request
genp REQUIRED
-- MUST contain exactly one element of type
-- InfoTypeAndValue
infoType REQUIRED
-- MUST be the OID identifying the specific PKI
-- management operationdescribed below
infoValue OPTIONAL
-- MUST be as described in the specific PKI
-- management operation described below
protection REQUIRED
-- As described in section 4.2
extraCerts REQUIRED
-- As described in section 4.3
This PKI management operation can be used by an EE to request CA certificates from the PKI management entity.
An EE requests CA certificates from the PKI management entity by sending a general message with OID id-it-getCaCerts. The PKI management entity responds with a general response with the same OID that either contains a SEQUENCE of certificates populated with the available CA intermediate and issuing CA certificates or with no content in case no CA certificate is available.
< NOTE: The OID id-it-getCaCerts is not yet defined. It should be registered in the tree 1.3.6.1.5.5.7.4 (id-it) like other infoType OIDs, see CMP Appendix F on page 92. >
The message sequence for this PKI management operation is as given in Section 5.4.1, with the following specific content:
The infoValue field of the general response containing the id-it-getCaCerts OID looks like this:
infoValue OPTIONAL
-- MUST be absent if no CA certificate is available
-- MUST be present if CA certificates are available
caCerts REQUIRED
-- MUST be present if infoValue is present
-- MUST be a sequence of CMPCertificate
This PKI management operation can be used by an EE to request an update of an existing root CA Certificate by the EE. It utilizes the CAKeyUpdAnnContent structure as described in CMP Appendix E.4 as response to a respective general message.
An EE requests a root CA certificate update from the PKI management entity by sending a general message with OID id-it-caKeyUpdateInfo as infoType and no infoValue. The PKI management entity responds with a general response with the same OID that either contains the update of the root CA certificate consisting of up to three certificates, or with no content in case no update is available.
These three certificates are described in more detail in section 4.4.1, section 6.2, and Appendix E.3 of [RFC4210]. The newWithNew certificate is the new root CA certificates and is REQUIRED to be present in the response message. The newWithOld certificate is RECOMMENDED to be present in the response message though it is REQUIRED for those cases where the receiving entity trusts the old root CA certificate and whishes to gain trust in the new root CA certificate. The oldWithNew certificate is OPTIONAL though it is only needed in a scenario where the requesting entity already trusts the new root CA certificate and wants to gain trust in the old root certificate.
The message sequence for this PKI management operation is as given in Section 5.4.1, with the following specific content:
The infoValue field of the general response containing the id-it-caKeyUpdateInfo extension looks like this:
infoValue OPTIONAL
-- MUST be absent if no update of the root CA certificate is
available
-- MUST be present if an update of the root CA certificate
-- is available
caKeyUpdateInfo REQUIRED
-- MUST be present and be of type CAKeyUpdAnnContent
oldWithNew OPTIONAL
-- MAY be present if infoValue is present
-- MUST contain an X.509 certificate containing the old public
-- root CA key signed with the new private root CA key
newWithOld RECOMMENDED
-- SHOULD be present if infoValue is present
-- MUST contain an X.509 certificate containing the new public
-- root CA key signed with the old private root CA key
newWithNew REQUIRED
-- MUST be present if infoValue is present
-- MUST contain the new root CA certificate
< TBD: To reduce unnecessary overhead by including not needed certificates, we intend to require only to incert the newWithNew certificate in the caKeyUpdateInfo structure and optionally omit the oldWithNew and newWithOld certificates. This is in conflict with [RFC4210] where also oldWithNew and newWithOld are required fields in caKeyUpdateInfo. Is there any possiblility to optionally leave these filds empty and still reuse the caKeyUpdateInfo structure as specified in [RFC4210]? >
This PKI management operation can be used by an EE to request configuration parameters for a planned certificate request operation.
An EE requests for a planned certificate request parameters from the PKI management entity by sending a general message with OID id-it-getCSRParam. The PKI management entity responds with a general response with the same OID that either contains the required fields, e.g., algorithm identifier for key pair generation or other attributes and extensions or with no content in case no specific requirements are made by the PKI.
< NOTE: The OID id-it-getCSRParam is not yet defined. It should be registered in the tree 1.3.6.1.5.5.7.4 (id-it) like other infoType OIDs, see CMP Appendix F on page 92. >
The EE SHOULD follow the requirements from the recieved CertTemplate and the optional RSA key length. In case a field is present but the value is absent or NULL, it means that this field is required but its content has to be provided by the EE.
< TBD: There is some more explanation needed to explain how to prefill the certTemplate structure. Possibly an example will help to clarify this. >
The message sequence for this PKI management operation is as given in Section 5.4.1, with the following specific content:
The infoValue field of the general response containing the id-it-getCSRParam OID looks like this:
infoValue OPTIONAL
-- MUST be absent if no requirements are available
-- MUST be present if the PKI management entity has any
-- requirements on the content of the certificates to be
-- requested
certTemplate REQUIRED
-- MUST be present if infoValue is present
-- MUST contain the prefilled certTemplate structure
rsaKeyLen OPTIONAL
-- This field is of type INTEGER. Any reasonable RSA key length
-- SHOULD be specified if the algorithm in the
-- subjectPublicKeyInfo field of the certTemplate is of type
-- rsaEncryption.
< TBD: To offer a set of allowed key lenths, the rsaKeyLen field could also be specified as a SEQUENCE OF INTEGER. >
This PKI management operation can be used by an EE to request the current certificate management configuration information by the EE in advance to a planned PKI management operation, e.g., in case no out-of-band transport is available. Such certificate management configuration can consist of all information the EE needs to know to generate and deliver a proper certificate request, such as
There is an overlap with Section 5.4.2 regarding transport of CA certificates and with Section 5.4.4 regarding key generation parameter and certificate request attributes and extensions. This profile offers to request a proprietary configuration file containing all information needed in one exchange.
< TBD: Especially with section 5.4.4 there is some overlap regarding algorithms, attributes and, extensions of the certificate that will be requested. It needs to be decided if both variants have a right to exist next to each other or if one option should be removed from this document. >
An EE requests certificate management configuration from the PKI management entity by sending a general message with the OID id-it-getCertMgtConfig. The PKI management entity responds with a general response with the same OID that either contains a certMgtConfig field containing the configuration file encoded as OCTET STRING or with no content in case no certificate management configuration is available.
< NOTE: The OID id-it-getCertMgtConfig is not yet defined. It should be registered in the tree 1.3.6.1.5.5.7.4 (id-it) like other infoType OIDs, see CMP Appendix F on page 92. >
The EE SHOULD use the contents of this certMgtConfig to format and deliver the certificate request. The certificate management configuration may contain contact details, e.g., like an URI and issuing CA distinguished name, where to address the request messages to and may also contain certificate request parameters as described in Section 5.4.4.
The certMgtConfig field may be of any format suitable for the EE, e.g., JWT or XML. The certMgtConfig contents MAY be signed, e.g., like CMS SignedData, JWS or, XML-DSig. For interoperability the format of the certMgtConfig field should be specified in detail if needed.
The message sequence for this PKI management operation is as given in Section 5.4.1, with the following specific content:
The infoValue field of the general response containing the id-it-getCertMgtConfig extension looks like this:
infoValue OPTIONAL
-- MUST be absent if no certificate management configuration
-- is available
-- MUST be present if the PKI management entity provides any
-- certificate management configuration
certMgtConfig REQUIRED
-- MUST be present if infoValue is present
-- MUST contain the certificate management configuration as OCTET
-- OCTET STRING
This PKI management operation can be used by an EE to request an enrollment voucher containing the root certificate of a new, additional, or alternative PKI to establish trust in this PKI, e.g., in case no out-of-band transport is available. Such an enrollment voucher can be used in advance to an enrollment to this new environment.
An EE requests an enrollment voucher from the PKI management entity by sending a general message. The PKI management entity responds with a general response with the same OID that either contains the voucher or with no content in case no voucher is available.
The PKI management entity MAY use the content of the voucherRequest to get an enrollment voucher from other backend components, e.g., as described in BRSKI. The EE SHOULD use the contents of the received enrollmentVoucher to authenticate the PKI management entity it is about to enroll to. The enrollment voucher may for example contain the Root CA certificate of the new PKI or the CMP signer certificate of the PKI management entity. The general response message MUST be properly authenticated and the EE MUST verify the authorization of the sender to install new root certificates. One example for an enrollment voucher is specified in RFC8366.
The voucherRequest and enrollmentVoucher fields may be of any format suitable for the EE, e.g., JWT or XML. The voucherRequest and enrollmentVoucher contents MAY contain a signature, e.g., CMS SignedData, JWS or, XML-DSig. For interoperability the format of the voucherRequest and enrollmentVoucher field schould be specified in detail if needed, e.g., as defined in BRSKI and RFC8366.
< TBD: The vontent of the voucherRequest and enrollmentVoucher fields can also be linited to the specifications in BRSKI and RFC8366. >
The message sequence for this PKI management operation is as given in Section 5.4.1, with the following specific content:
The infoValue field of the general message containing the id-it-getEnrollmentVoucher extension looks like this:
infoValue OPTIONAL
-- MUST be absent if no voucher request is available
-- MUST be present if the EE provides the voucher request
voucherRequest REQUIRED
-- MUST be present if infoValue is present
-- MUST contain the voucher request as OCTET STRING
The infoValue field of the general response containing the id-it-getEnrollmentVoucher extension looks like this:
infoValue OPTIONAL
-- MUST be absent if no enrollment voucher is available
-- MUST be present if the PKI management entity provides
-- the enrollment voucher
enrollmentVoucher REQUIRED
-- MUST be present if infoValue is present
-- MUST contain the enrollment voucher as OCTET STRING
This chapter focuses on the communication among different PKI management entities. Depending on the network and PKI solution design, these will either be an LRA, RA or CA.
Typically, a PKI management entity forwards messages from downstream, but it may also reply to them itself. Besides forwarding of received messages a PKI management entity could also need to revoke certificates of EEs, report errors, or may need to manage its own certificates.
< TBD: In CMP Updates additional extended key usages like id-kp-cmpRA will be defined to indicate that a key pair is entitled to be used for signature-based protection of a CMP message by a PKI management entity. >
Each CMP request message (i.e., ir, cr, p10cr, kur, pollReq, or certConf) or error message coming from an EE or the previous (downstream) PKI management entity MUST be sent to the next (upstream) PKI management entity. This PKI management entity MUST forward response messages to the next (downstream) PKI management entity or EE.
The PKI management entity SHOULD verify the protection, the syntax, the required message fields, the message type, and if applicable the authorization and the proof-of-possession of the message. Additional checks or actions MAY be applied depending on the PKI solution requirements and concept. If one of these verification procedures fails, the (L)RA SHOULD respond with a negative response message and SHOULD not forward the message further upstream. General error conditions should be handled as described in Section 5.3 and Section 6.3.
A PKI management entity SHOULD not change the received message if not necessary. The PKI management entity SHOULD only update the message protection if it is technically necessary. Concrete PKI system specifications may define in more detail if and when to do so.
This is particularly relevant in the upstream communication of a request message.
Each hop in a chain of PKI management entity has one or more functionalities, e.g., a PKI management entity
Therefore, the decision if a message should be forwardedCP/CPS).
depends on the PKI solution design and the associated security policy (
< TBD: In CMP Updates different circumstances that require adding of an additional protection by a PKI management entity or batching CMP messages at a PKI management entity by using the nested messages is described. It needs to be decided which of these variants should be specified here. Finally, I guess they will all be OPTIONAL. >
This section specifies the different options a PKI management entity may implement and use.
A PKI management entity MAY update the protection of a message
This is particularly relevant in the upstream communication of certificate request messages.
The message protection covers only the header and the body and not the extraCerts. The PKI management entity MAY change the extraCerts in any of the following message adaptations, e.g., to sort or add needed or to delete needless certificates to support the next hop. This may be particularly helpful to extend upstream messages with additional certificates or to reduce the number of certificates in downstream messages when forwarding to constrained devices.
This alternative to forward a message can be used by any PKI management entity to forward an original CMP message without changing the header, body or protection. In any of these cases the PKI management entity acts more like a proxy, e.g., on a network boundary, implementing no specific RA-like security functionality to the PKI.
This alternative to forward a message MUST be used for forwarding kur messages that must not be approved by the respective PKI management entity.
The following two alternatives to forward a message can be used by any PKI management entity to forward a CMP message with or without changes, but providing its own protection using its CMP signer key to assert approval of this message. In this case the PKI management entity acts as an actual Registration Authority (RA), which implements important security functionality of the PKI.
Before replacing the existing protection by a new protection, the PKI management entity MUST verify the protection provided by the EE or by the previous PKI component and approve its content including any own modifications. For certificate requests the PKI management entity MUST verify in particular the included proof-of-possession self-signature of the certTemplate using the public key of the requested certificate and MUST check that the EE, as authenticated by the message protection, is authorized to request a certificate with the subject as specified in the certTemplate.
In case the received message has been protected by a CA or another PKI management entity, the current PKI management entity MUST verify its protection and approve its content including any own modifications. For certificate requests the PKI management entity MUST check that the other PKI management entity, as authenticated by the protection of the incomming message, was authorized to issue or forward the request.
These message adaptations MUST NOT be applied to kur request messages as described in Section 5.1.3 since their original protection using the key and certificate to be updated needs to be preserved, unless the regCtrl OldCertId is used to clearly identify the certificate to be updated.
This alternative to forward a message can be used by any PKI management entity to forward a CMP message with or without modifying the message header or body while preserving any included proof-of-possession.
By replacing the existing protection using its own CMP signer key the PKI management entity provides a proof of verifying and approving of the message as described above.
In case the PKI management entity modifies the certTemplate of an ir or cr message, the message adaptation in Section 6.1.2.2 needs to be applied instead.
This alternativeto forward a message can be used by any PKI management entity to forward an ir or cr message with modifications of the certTemplate i.e., modification, addition, or removal of fields. Such changes will break the proof-of-possession provided by the EE in the original message.
By replacing the existing using its own CMP signer key the PKI management entity provides a proof of verifying and approving the new message as described above.
In addition to the above the PKI management entity MUST verify in particular the proof-of-possession contained in the original message as described above. If these checks were successfully performed the PKI management entity MUST change the popo to raVerified.
The popo field MUST contain the raVerified choice in the certReq structure of the modified message as follows:
popo
raVerified REQUIRED
-- MUST have the value NULL and indicates that the PKI
-- management entity verified the popo of the original
-- message
< TBD: In CMP Updates different circumstances that require adding of an additional protection by a PKI management entity or batching CMP messages at a PKI management entity by using the nested messages is described. It needs to be decided which of these variants should be specified here. Finally, I guess they will all be OPTIONAL. >
This functional extension can be used by a PKI management entity to initiate delayed enrollment. In this case a PKI management entity MUST add the status waiting in the response message. The PKI management entity MUST then reply to the pollReq messages as described in Section 5.1.7.
This PKI management operation can be used by a PKI management entity to revoke a certificate of any other entity. This revocation request message MUST be signed by the PKI management entity using its own CMP signer key to prove to the PKI authorization to revoke the certificate on behalf of the EE.
Preconditions:
The message sequence for this PKI management operation is identical to that given in section Section 5.2, with the following changes:
This functionality should be used by the PKI management entity to report any error conditions downstream to the EE. Potential error reporting by the EE upstream to the PKI management entity is described in Section 5.3.
In case the error condition is related to specific details of an ir, cr, p10cr, or kur request message it MUST be reported in the specific response message, i.e., an ip, cp, or kup with negative contents.
General error conditions, e.g., problems with the message header, protection, or extraCerts, and negative feedback on rr, pollReq, certConf, or error messages MUST be reported in the form of an error message.
In both situations the PKI management entity reports the errors in the PKIStatusInfo structure of the respective message as described in Section 5.3.
An EE receiving any such negative feedback SHOULD log the error appropriately and MUST terminate the current transaction.
The CMP messages are designed to be self-contained, such that in principle any transport can be used. HTTP SHOULD be used for online transport while file-based transport MAY be used in case offline transport is required. In case HTTP transport is not desired or possible, CMP messages MAY also be piggybacked on any other reliable transport protocol, e.g., CoAP.
Independently of the means of transport it could happen that messages are lost, or a communication partner does not respond. In order to prevent waiting indefinitely, each CMP client component SHOULD use a configurable per-request timeout, and each CMP server component SHOULD use a configurable per-response timeout in case a further message is to be expected from the client side. In this way a hanging transaction can be closed cleanly with an error and related resources (for instance, any cached extraCerts) can be freed.
This transport mechanism can be used by a PKI entity to transfer CMP messages over HTTP. If HTTP transport is used the specifications as described in [RFC6712] MUST be followed.
Each PKI management entity supporting HTTP or HTTPS transport MUST support the use of the path-prefix of '/.well-known/' as defined in [RFC5785] and the registered name of 'cmp' to ease interworking in a multi-vendor environment.
The CMP client MUST be configured with sufficient information to form the CMP server URI. This MUST be at least the authority portion of the URI, e.g., 'www.example.com:80', or the full operational path of the PKI management entity. An additional arbitrary label, e.g., 'arbitraryLabel1', MAY be configured as a separate component or as part of the full operational path to provide further information to address multiple CAs or certificate profiles. A valid full operational path can look like this:
PKI management operations SHOULD use the following URI path:
| PKI management operation | Path | Details |
|---|---|---|
| Enroll client to new PKI (REQUIRED) | /initialization | Section 5.1.1 |
| Enroll client to existing PKI (OPTIONAL) | /certification | Section 5.1.2 |
| Update client certificate (REQUIRED) | /keyupdate | Section 5.1.3 |
| Enroll client using PKCS#10 (OPTIONAL) | /p10 | Section 5.1.5 |
| Enroll client using central key generation (OPTIONAL) | /serverkeygen | Section 5.1.6 |
| Revoke client certificate (RECOMMENDED) | /revocation | Section 5.2 |
| Get CA certificates (OPTIONAL) | /getCAcert | Section 5.4.2 |
| Get root CA certificate update (OPTIONAL) | /getRootCAcertUpdate | Section 5.4.3 |
| Get certificate request parameters (OPTIONAL) | /getCSRparam | Section 5.4.4 |
| Get certificate management configuration (OPTIONAL) | /getCertMgtConfig | Section 5.4.5 |
| Get enrollment voucher (OPTIONAL) | /getVoucher | Section 5.4.6 |
Subsequent certConf, error, and pollReq messages are sent to the URI of the respective PKI management operation.
< TBD: It needs to be defined if specific path values for communication between PKI management entities as specified in section 6 are needed, e.g., 'forward' or 'nested'.>
This transport mechanism can be used by a PKI entity to further protect the HTTP transport as described in Section 7.1 using TLS 1.2 or TLS 1.3 as described in [RFC2818] with certificate-based authentication. Using this transport mechanism, the CMP transport via HTTPS MUST use TLS server authentication and SHOULD use TLS client authentication.
EE:
PKI management entity:
NOTE: The requirements for checking certificates given in [RFC5280], [RFC5246] and [RFC8446] MUST be followed for the TLS layer. Certificate status checking SHOULD be used for the TLS certificates of communication partners.
This transport mechanism can be used by a PKI entity to further protect the HTTP transport as described in Section 7.1 using TLS 1.2 or TLS 1.3 as described in [RFC2818] with mutual authentication based on shared secrets as described in [RFC5054].
EE:
PKI management entity:
For offline transfer file-based transport MAY be used. Offline transport is typically used between LRA and RA nodes.
Connection and error handling mechanisms like those specified for HTTP in [RFC6712] need to be implemented.
< TBD: Details need to be defined later >
In constrained environments where no HTTP transport is desired or possible, CoAP MAY be used instead. Connection and error handling mechanisms like those specified for HTTP in [RFC6712] may need to be implemented.
Such specification is out of scope of this document and would need to be specifies in a separate document.
For online transfer where no HTTP transport is desired or possible CMP messages MAY also be transported on some other reliable protocol. Connection and error handling mechanisms like those specified for HTTP in [RFC6712] need to be implemented.
Such specification is out of scope of this document and would need to be specifies in a separate document, e.g., in the scope of the respective transport protocol used.
<Add any IANA considerations>
<Add any security considerations>
We would like to thank the various reviewers of this document.
This becomes an Appendix.