| Network Working Group | D. Kumar |
| Internet-Draft | Cisco |
| Intended status: Standards Track | M. Wang |
| Expires: March 24, 2018 | Q. Wu |
| Huawei | |
| R. Rahman | |
| S. Raghavan | |
| Cisco | |
| September 20, 2017 |
Retrieval Methods YANG Data Model for Connectionless Operations, Administration, and Maintenance(OAM) protocols
draft-ietf-lime-yang-connectionless-oam-methods-08
This document presents a retrieval method YANG Data model for connectionless OAM protocols. It provides technology-independent RPC operations for connectionless OAM protocols. The retrieval methods model presented here can be extended to include technology specific details. This is leading to uniformity between OAM protocols and support both nested OAM workflows (i.e., performing OAM functions at different levels through a unified interface) and interacting OAM workflows ( i.e., performing OAM functions at same levels through a unified interface).
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on March 24, 2018.
Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Operations, Administration, and Maintenance (OAM) are important networking functions that allow operators to:
An overview of OAM tools is presented at [RFC7276].
Ping and Traceroute [RFC792], [RFC4443] and BFD [RFC5880] are well-known fault verification and isolation tools, respectively, for IP networks. Over the years, different technologies have developed similar tools for similar purposes.
In this document, we present an on-demand retrieval method YANG Data model for connectionless OAM protocols. This model provides technology-independent RPC operations for connectionless OAM protocols. It is separated from the generic YANG model for connectionless OAM [I-D.ietf-lime-yang-connectionless-oam] and can avoid mixing the models for the retrieved-data from the retrieval procedures. It is expected that retrieval procedures would evolve faster than the data model [I-D.ietf-lime-yang-connectionless-oam] and will allow new procedures to be defined for retrieval of the same data defined by the base data model.
The following terms are defined in [RFC6241] and are not redefined here:
The following terms are defined in [RFC6020] and are not redefined here: [RFC6020].
The terminology for describing YANG data models is found in
TP - Test Point
MAC - Media Access Control
RPC - A Remote Procedure Call
RPC operation - A specific Remote Procedure Call
A simplified graphical representation of the data model is used in this document. The meaning of the symbols in these diagrams is as follows:
<status> <flags> <name> <opts> <type>
<status> is one of:
+ for current
<flags> is one of:
rw for configuration data
ro for non-configuration data
-x for rpcs
-n for notifications
<name> is the name of the node
Each node is printed as:
<opts> is one of:
? for an optional leaf or choice
! for a presence container
* for a leaf-list or list
[<keys>] for a list's keys
<type> is the name of the type for leafs and leaf-lists
If the node is augmented into the tree from another module, its name is printed as <prefix>:<name>.
In this document, we present an on-demand retrieval method YANG Data model for connectionless OAM protocols. This model provides technology-independent retrieval procedures (RPC operations) for connectionless OAM protocols. It provides a flexible way to retrieve the data which defined by the "ietf-connectionless-oam.yang" [I-D.ietf-lime-yang-connectionless-oam].
The RPC model facilitates issuing commands to a NETCONF server (in this case to the device that need to execute the OAM command) and obtaining a response.
Under 'connectionless-oam-methods' module, we summarize common OAM functions and define two generic RPC operations: 'continuity-check' and 'path-discovery'. In practice, these RPC operations are activated on-demand and supported by corresponding technology-specific OAM tools [RFC7276]. For example, for the IP OAM model, the continuity-check RPC corresponds to the IP Ping [RFC792] [RFC4443], while the path-discovery RPC operation corresponds to IP Traceroute [RFC792] [RFC4443].
Note that the RPC operation presented in this document is the base building block, which is used to derive a model for a technology-specific OAM (i.e., ICMP ping [RFC792] [RFC4443], LSP ping [RFC8029]), the base building block should be extended with corresponding technology specific parameters. To facilitate this for future enhancements to data retrieval methods, the RPCs are captured under a separate module.
The generic 'path-discovery-data' and 'continuity-check-data' groupings are used as data outputs from different RPCs described in this document. Similar methods including other RPCs can retrieve the data using the same data model.
rpc continuity-check {
if-feature coam:continuity-check;
description
"Continuity-check RPC operation as per RFC7276.";
input {
uses rpc-input-parameters;
....
}
output {
container error-code {
leaf status-code {
type identityref{
base status-code;
}
mandatory true;
description
"Error code for CC.";
}
leaf status-sub-code {
type identityref{
base status-sub-code;
}
mandatory true;
description
"Sub code for CC.";
}
description
"Error code and Sub Code for CC.";
}
uses coam:continuity-check-data;
}
}
rpc path-discovery {
description
"path discovery RPC operation as per RFC7276.";
input {
uses rpc-input-parameters;
.....
}
output {
list response-list {
key "response-index";
description
"Path discovery response list.";
leaf response-index {
type uint32;
mandatory true;
description
"Response index.";
}
leaf status-code {
type identityref{
base status-code;
}
mandatory true;
description
"Error code for Path Discovery. ";
}
leaf status-sub-code {
type identityref{
base status-sub-code;
}
mandatory true;
description
"Sub code for Path Discovery. ";
}
}
uses coam:path-discovery-data;
}
}
Snippet of data hierarchy related to RPC operations
The complete data hierarchy related to the Connectionless OAM Retrieval Methods YANG model is presented below.
module: ietf-connectionless-oam-methods
rpcs:
+---x continuity-check {coam:continuity-check}?
| +---w input
| | +---w destination-tp
| | | +---w tp-location-type identityref
| | | +---w tp-address
| | | +---w mac-address
| | | | +---w mac-address yang:mac-address
| | | +---w ipv4-address
| | | | +---w ipv4-address inet:ipv4-address
| | | +---w ipv6-address
| | | | +---w ipv6-address inet:ipv6-address
| | | +---w tp-attribute
| | | | +---w tp-attribute-type? address-attribute-type
| | | | +---w (tp-attribute-value)?
| | | | +--:(ip-prefix)
| | | | | +---w ip-prefix? inet:ip-prefix
| | | | +--:(bgp)
| | | | | +---w bgp? inet:ip-prefix
| | | | +--:(tunnel)
| | | | | +---w tunnel-interface? uint32
| | | | +--:(pw)
| | | | | +---w remote-pe-address? inet:ip-address
| | | | | +---w pw-id? uint32
| | | | +--:(vpls)
| | | | | +---w route-distinguisher? rt:route-distinguisher
| | | | | +---w sender-ve-id? uint16
| | | | | +---w receiver-ve-id? uint16
| | | | +--:(mpls-mldp)
| | | | +---w (root-address)?
| | | | +--:(ip-address)
| | | | | +---w source-address? inet:ip-address
| | | | | +---w group-ip-address? inet:ip-address
| | | | +--:(vpn)
| | | | | +---w as-number? inet:as-number
| | | | +--:(global-id)
| | | | +---w lsp-id? string
| | | +---w system-info
| | | +---w system-id? rt:router-id
| | +---w source-interface if:interface-ref
| | +---w outbound-interface if:interface-ref
| | +---w vrf? coam:routing-instance-ref
| | +---w count? uint32
| | +---w ttl? uint8
| | +---w packet-size? uint32
| +--ro output
| +--ro error-code
| | +--ro status-code identityref
| | +--ro status-sub-code identityref
| +--ro src-test-point
| | +--ro ni? routing-instance-ref
| | +--ro tp-location-type identityref
| | +--ro tp-address
| | | +--ro mac-address
| | | | +--ro mac-address yang:mac-address
| | | +--ro ipv4-address
| | | | +--ro ipv4-address inet:ipv4-address
| | | +--ro ipv6-address
| | | | +--ro ipv6-address inet:ipv6-address
| | | +--ro tp-attribute
| | | | +--ro tp-attribute-type? address-attribute-type
| | | | +--ro (tp-attribute-value)?
| | | | +--:(ip-prefix)
| | | | | +--ro ip-prefix? inet:ip-prefix
| | | | +--:(bgp)
| | | | | +--ro bgp? inet:ip-prefix
| | | | +--:(tunnel)
| | | | | +--ro tunnel-interface? uint32
| | | | +--:(pw)
| | | | | +--ro remote-pe-address? inet:ip-address
| | | | | +--ro pw-id? uint32
| | | | +--:(vpls)
| | | | | +--ro route-distinguisher? rt:route-distinguisher
| | | | | +--ro sender-ve-id? uint16
| | | | | +--ro receiver-ve-id? uint16
| | | | +--:(mpls-mldp)
| | | | +--ro (root-address)?
| | | | +--:(ip-address)
| | | | | +--ro source-address? inet:ip-address
| | | | | +--ro group-ip-address? inet:ip-address
| | | | +--:(vpn)
| | | | | +--ro as-number? inet:as-number
| | | | +--:(global-id)
| | | | +--ro lsp-id? string
| | | +--ro system-info
| | | +--ro system-id? rt:router-id
| | +--ro egress-intf-name? if:interface-ref
| +--ro dest-test-point
| | +--ro ni? routing-instance-ref
| | +--ro tp-location-type identityref
| | +--ro tp-address
| | | +--ro mac-address
| | | | +--ro mac-address yang:mac-address
| | | +--ro ipv4-address
| | | | +--ro ipv4-address inet:ipv4-address
| | | +--ro ipv6-address
| | | | +--ro ipv6-address inet:ipv6-address
| | | +--ro tp-attribute
| | | | +--ro tp-attribute-type? address-attribute-type
| | | | +--ro (tp-attribute-value)?
| | | | +--:(ip-prefix)
| | | | | +--ro ip-prefix? inet:ip-prefix
| | | | +--:(bgp)
| | | | | +--ro bgp? inet:ip-prefix
| | | | +--:(tunnel)
| | | | | +--ro tunnel-interface? uint32
| | | | +--:(pw)
| | | | | +--ro remote-pe-address? inet:ip-address
| | | | | +--ro pw-id? uint32
| | | | +--:(vpls)
| | | | | +--ro route-distinguisher? rt:route-distinguisher
| | | | | +--ro sender-ve-id? uint16
| | | | | +--ro receiver-ve-id? uint16
| | | | +--:(mpls-mldp)
| | | | +--ro (root-address)?
| | | | +--:(ip-address)
| | | | | +--ro source-address? inet:ip-address
| | | | | +--ro group-ip-address? inet:ip-address
| | | | +--:(vpn)
| | | | | +--ro as-number? inet:as-number
| | | | +--:(global-id)
| | | | +--ro lsp-id? string
| | | +--ro system-info
| | | +--ro system-id? rt:router-id
| | +--ro ingress-intf-name? if:interface-ref
| +--ro sequence-number? uint64
| +--ro hop-cnt? uint8
| +--ro session-packet-statistics
| | +--ro rx-packet-count? uint32
| | +--ro tx-packet-count? uint32
| | +--ro rx-bad-packet? uint32
| | +--ro tx-packet-failed? uint32
| +--ro session-error-statistics
| | +--ro packet-drops-count? uint32
| | +--ro packet-reorder-count? uint32
| | +--ro packets-out-of-seq-count? uint32
| | +--ro packets-dup-count? uint32
| +--ro session-delay-statistics
| | +--ro time-resolution-value? identityref
| | +--ro min-delay-value? uint32
| | +--ro max-delay-value? uint32
| | +--ro average-delay-value? uint32
| +--ro session-jitter-statistics
| +--ro time-resolution-value? identityref
| +--ro min-jitter-value? uint32
| +--ro max-jitter-value? uint32
| +--ro average-jitter-value? uint32
+---x path-discovery {coam:path-discovery}?
+---w input
| +---w destination-tp
| | +---w tp-location-type identityref
| | +---w tp-address
| | +---w mac-address
| | | +---w mac-address yang:mac-address
| | +---w ipv4-address
| | | +---w ipv4-address inet:ipv4-address
| | +---w ipv6-address
| | | +---w ipv6-address inet:ipv6-address
| | +---w tp-attribute
| | | +---w tp-attribute-type? address-attribute-type
| | | +---w (tp-attribute-value)?
| | | +--:(ip-prefix)
| | | | +---w ip-prefix? inet:ip-prefix
| | | +--:(bgp)
| | | | +---w bgp? inet:ip-prefix
| | | +--:(tunnel)
| | | | +---w tunnel-interface? uint32
| | | +--:(pw)
| | | | +---w remote-pe-address? inet:ip-address
| | | | +---w pw-id? uint32
| | | +--:(vpls)
| | | | +---w route-distinguisher? rt:route-distinguisher
| | | | +---w sender-ve-id? uint16
| | | | +---w receiver-ve-id? uint16
| | | +--:(mpls-mldp)
| | | +---w (root-address)?
| | | +--:(ip-address)
| | | | +---w source-address? inet:ip-address
| | | | +---w group-ip-address? inet:ip-address
| | | +--:(vpn)
| | | | +---w as-number? inet:as-number
| | | +--:(global-id)
| | | +---w lsp-id? string
| | +---w system-info
| | +---w system-id? rt:router-id
| +---w source-interface if:interface-ref
| +---w outbound-interface if:interface-ref
| +---w vrf? coam:routing-instance-ref
| +---w max-ttl? uint8
+--ro output
+--ro response-list* [response-index]
| +--ro response-index uint32
| +--ro status-code identityref
| +--ro status-sub-code identityref
+--ro src-test-point
| +--ro ni? routing-instance-ref
| +--ro tp-location-type identityref
| +--ro tp-address
| +--ro mac-address
| | +--ro mac-address yang:mac-address
| +--ro ipv4-address
| | +--ro ipv4-address inet:ipv4-address
| +--ro ipv6-address
| | +--ro ipv6-address inet:ipv6-address
| +--ro tp-attribute
| | +--ro tp-attribute-type? address-attribute-type
| | +--ro (tp-attribute-value)?
| | +--:(ip-prefix)
| | | +--ro ip-prefix? inet:ip-prefix
| | +--:(bgp)
| | | +--ro bgp? inet:ip-prefix
| | +--:(tunnel)
| | | +--ro tunnel-interface? uint32
| | +--:(pw)
| | | +--ro remote-pe-address? inet:ip-address
| | | +--ro pw-id? uint32
| | +--:(vpls)
| | | +--ro route-distinguisher? rt:route-distinguisher
| | | +--ro sender-ve-id? uint16
| | | +--ro receiver-ve-id? uint16
| | +--:(mpls-mldp)
| | +--ro (root-address)?
| | +--:(ip-address)
| | | +--ro source-address? inet:ip-address
| | | +--ro group-ip-address? inet:ip-address
| | +--:(vpn)
| | | +--ro as-number? inet:as-number
| | +--:(global-id)
| | +--ro lsp-id? string
| +--ro system-info
| +--ro system-id? rt:router-id
+--ro dest-test-point
| +--ro ni? routing-instance-ref
| +--ro tp-location-type identityref
| +--ro tp-address
| +--ro mac-address
| | +--ro mac-address yang:mac-address
| +--ro ipv4-address
| | +--ro ipv4-address inet:ipv4-address
| +--ro ipv6-address
| | +--ro ipv6-address inet:ipv6-address
| +--ro tp-attribute
| | +--ro tp-attribute-type? address-attribute-type
| | +--ro (tp-attribute-value)?
| | +--:(ip-prefix)
| | | +--ro ip-prefix? inet:ip-prefix
| | +--:(bgp)
| | | +--ro bgp? inet:ip-prefix
| | +--:(tunnel)
| | | +--ro tunnel-interface? uint32
| | +--:(pw)
| | | +--ro remote-pe-address? inet:ip-address
| | | +--ro pw-id? uint32
| | +--:(vpls)
| | | +--ro route-distinguisher? rt:route-distinguisher
| | | +--ro sender-ve-id? uint16
| | | +--ro receiver-ve-id? uint16
| | +--:(mpls-mldp)
| | +--ro (root-address)?
| | +--:(ip-address)
| | | +--ro source-address? inet:ip-address
| | | +--ro group-ip-address? inet:ip-address
| | +--:(vpn)
| | | +--ro as-number? inet:as-number
| | +--:(global-id)
| | +--ro lsp-id? string
| +--ro system-info
| +--ro system-id? rt:router-id
+--ro sequence-number? uint64
+--ro hop-cnt? uint8
+--ro session-packet-statistics
| +--ro rx-packet-count? uint32
| +--ro tx-packet-count? uint32
| +--ro rx-bad-packet? uint32
| +--ro tx-packet-failed? uint32
+--ro session-error-statistics
| +--ro packet-drops-count? uint32
| +--ro packet-reorder-count? uint32
| +--ro packets-out-of-seq-count? uint32
| +--ro packets-dup-count? uint32
+--ro session-delay-statistics
| +--ro time-resolution-value? identityref
| +--ro min-delay-value? uint32
| +--ro max-delay-value? uint32
| +--ro average-delay-value? uint32
+--ro session-jitter-statistics
| +--ro time-resolution-value? identityref
| +--ro min-jitter-value? uint32
| +--ro max-jitter-value? uint32
| +--ro average-jitter-value? uint32
+--ro path-verification
| +--ro flow-info? string
| +--ro session-path-verification-statistics
| +--ro verified-count? uint32
| +--ro failed-count? uint32
+--ro path-trace-info
+--ro path-trace-info-list* [index]
+--ro index uint32
+--ro ni? routing-instance-ref
+--ro tp-location-type identityref
+--ro tp-address
| +--ro mac-address
| | +--ro mac-address yang:mac-address
| +--ro ipv4-address
| | +--ro ipv4-address inet:ipv4-address
| +--ro ipv6-address
| | +--ro ipv6-address inet:ipv6-address
| +--ro tp-attribute
| | +--ro tp-attribute-type? address-attribute-type
| | +--ro (tp-attribute-value)?
| | +--:(ip-prefix)
| | | +--ro ip-prefix? inet:ip-prefix
| | +--:(bgp)
| | | +--ro bgp? inet:ip-prefix
| | +--:(tunnel)
| | | +--ro tunnel-interface? uint32
| | +--:(pw)
| | | +--ro remote-pe-address? inet:ip-address
| | | +--ro pw-id? uint32
| | +--:(vpls)
| | | +--ro route-distinguisher? rt:route-distinguisher
| | | +--ro sender-ve-id? uint16
| | | +--ro receiver-ve-id? uint16
| | +--:(mpls-mldp)
| | +--ro (root-address)?
| | +--:(ip-address)
| | | +--ro source-address? inet:ip-address
| | | +--ro group-ip-address? inet:ip-address
| | +--:(vpn)
| | | +--ro as-number? inet:as-number
| | +--:(global-id)
| | +--ro lsp-id? string
| +--ro system-info
| +--ro system-id? rt:router-id
+--ro timestamp-type? uint32
+--ro timestamp-sec? uint32
+--ro timestamp-nanosec? uint32
+--ro ingress-intf-name? if:interface-ref
+--ro egress-intf-name? if:interface-ref
+--ro queue-depth? uint32
+--ro transit-delay? uint32
+--ro app-meta-data? uint64
data hierarchy of OAM Retrieval Methods
<CODE BEGINS> file "ietf-connectionless-oam-methods@2017-09-06.yang"
module ietf-connectionless-oam-methods {
namespace "urn:ietf:params:xml:ns:yang:ietf-connectionless-oam-methods";
prefix coam-methods;
import ietf-interfaces {
prefix if;
}
import ietf-connectionless-oam {
prefix coam;
}
organization
"IETF LIME Working Group";
contact
"Deepak Kumar dekumar@cisco.com
Qin Wu bill.wu@huawei.com
S Raghavan srihari@cisco.com
Zitao Wang wangzitao@huawei.com
R Rahman rrahman@cisco.com";
description
"This YANG module defines the RPC operations for
connectionless OAM to be used within IETF
in a protocol Independent manner.
It is assumed that each protocol maps
corresponding abstracts to its native format.
Each protocol may extend the YANG model defined
here to include protocol specific extensions";
revision 2017-09-06{
description
"08 version";
reference "draft-ietf-lime-yang-connectionless-oam-methods";
}
identity status-code{
description
"Base status code";
}
identity invalid-cc{
base status-code;
description
"Indicates that the Continuity check message is invalid";
}
identity invalid-pd {
base status-code;
description
"Indicates that the path discovery message is invalid";
}
identity status-sub-code {
description
"Base status sub code";
}
grouping rpc-input-parameters {
container destination-tp {
uses coam:tp-address;
description
"Destination test point.";
}
leaf source-interface {
type if:interface-ref;
mandatory true;
description
"Source interface.";
}
leaf outbound-interface {
type if:interface-ref;
mandatory true;
description
"Outbound interface.";
}
leaf vrf {
type coam:routing-instance-ref;
description
"VRF instance.";
}
description
"Grouping for RPC input parameters";
}
rpc continuity-check {
if-feature "coam:continuity-check";
description
"Continuity-check RPC operation as per RFC7276.";
input {
uses rpc-input-parameters;
uses coam:session-type {
description "If session-type is specified, then session-type
must be set to on-demand";
}
leaf count {
type uint32;
default "5";
description
"Specifies the number of
packets that will be sent. By
default, the packet number is
set to 5.";
}
leaf ttl {
type uint8;
default "255";
description
"Time to live (TTL) used to limit lifetime
of data packet transmitted in the network
and prevent looping. The TTL value is decremented
for every hop which the packet traverses. If the
TTL is zero, the data packet will be discarded.";
}
leaf packet-size {
type uint32 {
range "64..10000";
}
default "64";
description
"Packet size of continuity-check message, in octets.
By default, the packet size is set to 64 octets.";
}
}
output {
container error-code {
leaf status-code {
type identityref{
base status-code;
}
mandatory true;
description
"Error code for continuity-check message. For example, Error code in
ICMPv6 message includes
1-Destination Unreachable
2- Packet Too Big
3- Time Exceeded
4- Parameter Problem [RFC4443].";
}
leaf status-sub-code {
type identityref{
base status-sub-code;
}
mandatory true;
description
"Sub code for continuity-check message. For example Sub code in
ICMPv6 Parameter Problem Message includes:
1-Erroneous header field encountered
2-Unrecognized Next Header type encountered
3-Unrecognized IPv6 option encountered.";
}
description
"Error code and Sub Code for continuity-check message.";
}
uses coam:continuity-check-data;
}
}
rpc path-discovery {
if-feature "coam:path-discovery";
description
"Path discovery RPC operation as per RFC7276.";
input {
uses rpc-input-parameters;
uses coam:session-type {
description "If session-type is specified, then session-type
must be set to on-demand";
}
leaf max-ttl {
type uint8;
default "255";
description
"Maximum TTL indicates the maixmum number of hops that
a packet is permitted to travel before being discarded
by a router. By default, the maximimum TTL is set to 255.";
}
}
output {
list response-list {
key "response-index";
description
"Path discovery response list.";
leaf response-index {
type uint32;
mandatory true;
description
"Response index.";
}
leaf status-code {
type identityref{
base status-code;
}
mandatory true;
description
"Error code for Path Discovery message.
For example, Error code in ICMPv6 message includes
1-Destination Unreachable
2- Packet Too Big
3- Time Exceeded
4- Parameter Problem [RFC4443]. ";
}
leaf status-sub-code {
type identityref{
base status-sub-code;
}
mandatory true;
description
"Sub code for Path Discovery message. For example Sub code in
ICMPv6 Parameter Problem Message includes:
1-Erroneous header field encountered
2-Unrecognized Next Header type encountered
3-Unrecognized IPv6 option encountered ";
}
}
uses coam:path-discovery-data;
}
}
}
<CODE ENDS>
The YANG module defined in this document is designed to be accessed via network management protocols such as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS [RFC5246].
The NETCONF access control model [RFC6536] provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content.
Some of the RPC operations in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control access to these operations. These are the operations and their sensitivity/vulnerability:
which may lead to Denial-of-Service attack on both the local device and the network or unauthorized source access to some sensitive information.
This document registers a URI in the IETF XML registry [RFC3688]. Following the format in [RFC3688], the following registration is requested to be made:
URI: urn:ietf:params:xml:ns:yang:ietf-connectionless-oam-methods
Registrant Contact: The IESG.
XML: N/A, the requested URI is an XML namespace.
This document registers a YANG module in the YANG Module Names registry [RFC6020].
name: ietf-connectionless-oam-methods
namespace: urn:ietf:params:xml:ns:yang:ietf-connectionless-oam-methods
prefix: coam-methods
reference: RFC XXXX
The following is an example of extensions possible to "ietf-connectionless-oam-methods" YANG model defined in this document.
The snippet below depicts an example of augmenting the "ietf-connectionless-oam-methods" YANG model with ICMP ping attributes:
augment "/coam-methods:continutiy-check"
+"/coam-methods:output"{
container session-rtt-statistics{
leaf min-rtt{
type uint32;
description
"This minimum ping round-trip-time(RTT) received.";
}
leaf max-rtt{
type uint32;
description
"This maximum ping round-trip-time(RTT) received.";
}
leaf avg-rtt{
type uint32;
description
"The current average ping round-trip-time(RTT)";
}
description
"This container presents the ping round-trip-time statistics.";
}
}
As discussed in introduction section of this document, the new retrieval procedures can be defined for retrieval of the same data defined by base YANG Data model for connectionless OAM protocols. This appendix demonstrates how the base connectionless OAM data model can be extended to support persistent data retrieval besides on demand retrieval procedures defined in section 3,i.e.,first retrieve persistent-id based on destination test point location information and then retrieve export details based on persistent-id. Internet Protocol Flow Information Export (IPFIX) [RFC7011] or YANG-push [I-D.ietf-netconf-yang-push]. are currently outlined here as data export options and more can be added in future.
The YANG module "example-cl-oam-persistent-methods" shown below is intended as an illustration rather than a real definition of a RPC operation model for persistent data retrieval. For the sake of brevity, this module does not obey all the guidelines specified in [RFC6087].
module example-cl-oam-persistent-methods {
namespace "http://example.com/cl-oam-persistent-methods";
prefix pcoam-methods;
import ietf-interfaces {
prefix if;
}
import ietf-connectionless-oam {
prefix coam;
}
import ietf-yang-types {
prefix yang;
}
identity export-method {
description
"Base identity to represent a conceptual export-method.";
}
identity ipfix-export {
base export-method;
description
"IPFIX based export. Configuration provided separately.";
}
identity yang-push-export {
base export-method;
description
"Yang-push from draft-ietf-netconf-yang-push";
}
identity status-code{
description
"Base status code";
}
identity invalid-cc{
base status-code;
description
"Indicates that the Continuity check message is invalid";
}
identity invalid-pd {
base status-code;
description
"Indicates that the path discovery message is invalid";
}
identity status-sub-code {
description
"Base status sub code";
}
typedef export-method {
type identityref {
base export-method;
}
description
"Export method type.";
}
typedef change-type {
type enumeration {
enum "create" {
description
"Change due to a create.";
}
enum "delete" {
description
"Change due to a delete.";
}
enum "modify" {
description
"Change due to an update.";
}
}
description
"Different types of changes that may occur.";
}
rpc cc-get-persistent-id {
if-feature "coam:continuity-check";
description
"Obtains continuity-check persistent identification given mapping
parameters as input.";
input {
container destination-tp {
uses coam:tp-address;
description
"Destination test point.";
}
uses coam:session-type;
leaf source-interface {
type if:interface-ref;
description
"Source interface.";
}
leaf outbound-interface {
type if:interface-ref;
description
"Outbound interface.";
}
leaf vrf {
type coam:routing-instance-ref;
description
"VRF instance.";
}
}
output {
container error-code {
leaf status-code {
type identityref{
base status-code;
}
mandatory true;
description
"Error code.";
}
leaf status-sub-code {
type identityref{
base status-sub-code;
}
mandatory true;
description
"Sub code for CC.";
}
description
"Error code and Sub Code.";
}
leaf cc-persistent-id {
type string;
description
"Id to act as a cookie.";
}
}
}
rpc cc-persistent-get-export-details {
if-feature "coam:continuity-check";
description
"Given the persistent id, gets the configuration
options, details related to the configured data
export.";
input {
leaf cc-persistent-id {
type string;
description
"Persistent Id for use as a key in search.";
}
}
output {
container error-code {
leaf status-code {
type identityref{
base status-code;
}
mandatory true;
description
"Error code.";
}
leaf status-sub-code {
type identityref{
base status-sub-code;
}
mandatory true;
description
"Sub code for CC.";
}
description
"Error code and Sub Code.";
}
leaf data-export-method {
type export-method;
description
"Type of export in use.";
}
choice cc-trigger {
description
"Necessary conditions for
periodic or on-change trigger.";
case periodic {
description
"Periodic reports.";
leaf period {
type yang:timeticks;
description
"Time interval between reports.";
}
leaf start-time {
type yang:date-and-time;
description
"Timestamp from which reports were started.";
}
}
case on-change {
description
"On-change trigger and not periodic.";
leaf all-data-on-start {
type boolean;
description
"Full update done on start or not.";
}
leaf-list excluded-change {
type change-type;
description
"Changes that will not trigger an update.";
}
}
}
}
}
rpc pd-get-persistent-id {
if-feature "coam:path-discovery";
description
"Obtains persistent path discovery identification.";
input {
container destination-tp {
uses coam:tp-address;
description
"Destination test point.";
}
uses coam:session-type;
leaf source-interface {
type if:interface-ref;
description
"Source interface.";
}
leaf outbound-interface {
type if:interface-ref;
description
"Outbound interface.";
}
leaf vrf {
type coam:routing-instance-ref;
description
"VRF";
}
}
output {
list response-list {
key "response-index";
description
"Path discovery response list.";
leaf response-index {
type uint32;
mandatory true;
description
"Response index.";
}
leaf status-code {
type identityref {
base status-code;
}
mandatory true;
description
"Error code for Persistent Path Discovery Information. ";
}
leaf status-sub-code {
type identityref{
base status-sub-code;
}
mandatory true;
description
"Sub code for Persistent Path Discovery Information. ";
}
leaf pd-persistent-id {
type string;
description
"Id to act as a cookie.";
}
}
}
}
rpc pd-persistent-get-export-details {
if-feature "coam:path-discovery";
description
"Given the persistent id, gets the configuration
options, details related to the configured data
export.";
input {
leaf cc-persistent-id {
type string;
description
"Persistent Id for use as a key in search.";
}
}
output {
list response-list {
key "response-index";
description
"Path discovery response list.";
leaf response-index {
type uint32;
mandatory true;
description
"Response index.";
}
leaf status-code {
type identityref{
base status-code;
}
mandatory true;
description
"Error code for Persistent Path Discovery Creation. ";
}
leaf status-sub-code {
type identityref{
base status-sub-code;
}
mandatory true;
description
"Sub code for Persistent Path Discovery Creation. ";
}
leaf data-export-method {
type export-method;
description
"Type of export.";
}
choice pd-trigger {
description
"Necessary conditions
for periodic or on-change
trigger.";
case periodic {
description
"Periodic reports.";
leaf period {
type yang:timeticks;
description
"Time interval between reports.";
}
leaf start-time {
type yang:date-and-time;
description
"Timestamp from which reports are started.";
}
}
case on-change {
description
"On-change trigger and not periodic.";
leaf all-data-on-start {
type boolean;
description
"Full update done on start or not.";
}
leaf-list excluded-change {
type change-type;
description
"Changes that will not trigger an update.";
}
}
}
}
}
}
}