Vendor Specific LISP Canonical Address Format (LCAF)

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 1 April 2021.¶

Copyright Notice

Copyright (c) 2020 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶

Table of Contents

3. Vendor Specific LCAF

The Vendor Specific LCAF relies on using the IEEE Organizationally Unique Identifier (OUI) [IEEE.802_2001] to prevent collisions across vendors or organizations using the LCAF. The format of the Vendor Specific LCAF is provided below.¶

 0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|           AFI = 16387         |     Rsvd1     |     Flags     |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|   Type = 255  |     Rsvd2     |            Length             |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|      Rsvd3    |    Organizationally Unique Identifier (OUI)   |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                        Internal format...                     |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

The fields in the first 8 octets of the above Vendor Specific LCAF are actually the fields defined in the general LCAF format specified in [RFC8060]. The "Type" field MUST be set to the value 255 to indicate that this is a Vendor Specific LCAF. The fields defined by the Vendor Specific LCAF are:¶

Rsvd3: This 8-bit field is reserved for future use. It MUST be set to 0 on transmit and MUST be ignored on receipt.¶

Organizationally Unique Identifier (OUI): This is a 24-bit field that carries the IEEE OUI [IEEE.802_2001] of the organization.¶

Internal format: This is a variable length field that is left undefined on purpose. Each vendor or organization can define its own internal format(s) to use with the Vendor Specific LCAF.¶

The Vendor Specific LCAF type SHOULD NOT be used in deployments where different organizations interoperate. However, there may be cases where two (or more) organizations share a common deployment on which they explicitly and mutually agree to use a particular Vendor Specific LCAF. In that case, the organizations involved need to carefully assess the interoperability concerns for that particular deployment.¶

If a LISP device receives a LISP message containing a Vendor Specific LCAF with an OUI that it does not understand, it MUST drop the message.¶

4. Security Considerations

This document enables organizations to define new LCAFs for their internal use. It is the responsibility of these organizations to properly assess the security implications of the formats they define.¶

5. Acknowledgments

The authors would like to thank Joel Halpern and Luigi Iannone for their suggestions and guidance regarding this document.¶

6. IANA Considerations

Following the guidelines of [RFC8126], this document requests IANA to update the "LISP Canonical Address Format (LCAF) Types" Registry defined in [RFC8060] to allocate the following assignment:¶

Authors' Addresses