LPWAN Static Context Header Compression (SCHC) Architecture

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶

This Internet-Draft will expire on 19 November 2021.¶

Copyright Notice

Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶

Table of Contents

1. Introduction

The IETF LPWAN WG defined the necessary operations to enable IPv6 over selected Low-Power Wide Area Networking (LPWAN) radio technologies. [rfc8376] presents an overview of those technologies.¶

The Static Context Header Compression (SCHC) [rfc8724] technology is the core product of the IETF LPWAN working group. [rfc8724] defines a generic framework for header compression and fragmentation, based on a static context that is pre-installed on the SCHC endpoints.¶

This document details the constitutive elements of a SCHC-based solution, and how the solution can be deployed. It provides a general architecture for a SCHC deployment, positioning the required specifications, describing the possible deployment types, and indicating models whereby the rules can be distributed and installed to enable reliable and scalable operations.¶

2. LPWAN Technologies and Profiles

Because LPWAN technologies [rfc8376] have strict yet distinct constraints, e.g., in terms of maximum frame size, throughput, and/or directionality, a SCHC instance must be profiled to adapt to the specific necessities of the technology to which it is applied.¶

Appendix D. "SCHC Parameters" of [rfc8724] lists the information that an LPWAN technology-specific document must provide to profile SCHC for that technology.¶

As an example, [rfc9011] provides the SCHC profile for LoRaWAN networks.¶

3. The Static Context Header Compression

SCHC [rfc8724] specifies an extreme compression capability based on a state that must match on the compressor and decompressor side. This state comprises a set of Compression/Decompression (C/D) rules.¶

The SCHC Parser analyzes incoming packets and creates a list of fields that it matches against the compression rules. The rule that matches best is used to compress the packet, and the rule identifier (RuleID) is transmitted together with the compression residue to the decompressor. Based on the RuleID and the residue, the decompressor can rebuild the original packet and forward it in its uncompressed form over the Internet.¶

[rfc8724] also provides a Fragmentation/Reassembly (F/R) capability to cope with the maximum frame size of a Link, which is extremely constrained in the case of an LPWAN network.¶

If a SCHC-compressed packet is too large to be sent in a single Link-Layer PDU, the SCHC fragmentation can be applied on the compressed packet. The process of SCHC fragmentation is similar to that of compression; the fragmentation rules that are programmed for this device are checked to find the most appropriate one, regarding the SCHC packet size, the link error rate, and the reliability level required by the application.¶

The nature of a ruleID allows to determine if it is a compression or fragmentation rule.¶

4. SCHC Endpoints

Section 3 of [rfc8724] depicts a typical network architecture for an LPWAN network, simplified from that shown in [rfc8376] and reproduced in Figure 1.¶

 ()   ()   ()       |
  ()  () () ()     / \       +---------+
() () () () () () /   \======|    ^    |             +-----------+
 ()  ()   ()     |           | <--|--> |             |Application|
()  ()  ()  ()  / \==========|    v    |=============|   Server  |
  ()  ()  ()   /   \         +---------+             +-----------+
 Dev            RGWs             NGW                      App

Typically, an LPWAN network topology is star-oriented, which means that all packets between the same source-destination pair follow the same path from/to a central point. In that model, highly constrained Devices (Dev) exchange information with LPWAN Application Servers (Apps) through a central Network Gateway (NGW), which can be powered and is typically a lot less constrained than the Devices. Because devices embed built-in applications, the traffic flows to be compressed are known in advance and the location of the C/D and F/R functions (e.g., at the Dev and NGW), and the associated rules, can be pre provisionned in the network .¶

Then again, SCHC is very generic and its applicability is not limited to star-oriented deployments and/or to use cases where applications are very static and the state can provisionned in advance. [I-D.thubert-intarea-schc-over-ppp] describes an alternate deployment where the C/D and/or F/R operations are performed between peers of equal capabilities over a PPP [rfc2516] connection. SCHC over PPP illustrates that with SCHC, the protocols that are compressed can be discovered dynamically and the rules can be fetched on-demand by both parties from the same Uniform Resource Name (URN) [rfc8141], ensuring that the peers use the exact same set of rules.¶

    +----------+  Wi-Fi /   +----------+                ....
    |    IP    |  Ethernet  |    IP    |            ..          )
    |   Host   +-----/------+  Router  +----------(   Internet   )
    | SCHC C/D |  Serial    | SCHC C/D |            (         )
    +----------+            +----------+               ...
                <-- SCHC -->
                  over PPP

5. SCHC Instances

The rule database contains a set of rules that are specific per device. There is thus a SCHC instance per pair of endpoints. [rfc8724] states that a SCHC instance obtains the rules to process C/D and F/R before the session starts, and that rules cannot be modified during the session.¶

[rfc8724] was defined to compress IPv6 [rfc8200] and UDP; but SCHC really is a generic compression and fragmentation technology. As such, SCHC is agnostic to which protocol it compresses and at which layer it is operated. The C/D peers may be hosted by different entities for different layers, and the F/R operation may also be performed between different parties, or different sub-layers in the same stack, and/or managed by different organizations.¶

If a protocol or a layer requires additional capabilities, it is always possible to document more specifically how to use SCHC in that context, or to specify additional behaviours. For instance, [I-D.ietf-lpwan-coap-static-context-hc] extends the compression to CoAP [RFC7252] and OSCORE [RFC8613].¶

As represented figure Figure 3, the fragmentation and the compression of the IP and UDP headers may be operated by a network SCHC instance whereas the end-to-end compression of the application payload happens between the device and the application. The compression of the application payload may be split in two instances to deal with the encrypted portion of the application PDU.¶

         (device)            (NGW)                              (App)

         +--------+                                           +--------+
  A S    |  CoAP  |                                           |  CoAP  |
  p C    |  inner |                                           |  inner |
  p H    +--------+                                           +--------+
  . C    |  SCHC  |                                           |  SCHC  |
         |  inner |   cryptographical boundary                |  inner |
 -._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._
  A S    |  CoAP  |                                           |  CoAP  |
  p C    |  outer |                                           |  outer |
  p H    +--------+                                           +--------+
  . C    |  SCHC  |                                           |  SCHC  |
         |  outer |   layer / functional boundary             |  outer |
 -._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._
  N      .  UDP   .                                           .  UDP   .
  e      ..........     ..................                    ..........
  t      .  IPv6  .     .      IPv6      .                    .  IPv6  .
  w S    ..........     ..................                    ..........
  o C    .  SCHC  .     .  SCHC  .       .                    .        .
  r H    ..........     ..........       .                    .        .
  k C    .  LPWAN .     . LPWAN  .       .                    .        .
         ..........     ..................                    ..........
             ((((LPWAN))))             ------   Internet  ------

This document defines a generic architecture for SCHC that can be used at any of these levels. The goal of the architectural document is to orchestrate the different protocols and data model defined by the LPWAN woeking group to design an operational and interoperable framework for allowing IP application over contrained networks.¶

6. SCHC Data Model

A SCHC instance, summarized in the Figure 4, implies C/D and/or F/R present in both end and that both ends are provisionned with the same set of rules.¶

       (-------)                                (-------)
       ( Rules )                                ( Rules )
       (-------)                                (-------)
        . read                                   . read
        .                                        .
       +-------+                                +-------+
   <===| R & D |<===                        <===| C & F |<===
   ===>| C & F |===>                        ===>| R & D |===>
       +-------+                                +-------+
       +-------+

To be able to provision end-points from different vendors, a common rule representation is needed that expresses the SCHC rules in an interoperable fashion. To that effect, [I-D.ietf-lpwan-schc-yang-data-model] defines a rule representation using the YANG formalism.¶

[I-D.ietf-lpwan-schc-yang-data-model] defines an YANG data model to represent the rules. This enables the use of several protocols for rule management, such as NETCONF[RFC6241], RESTCONF[RFC8040], and CORECONF[I-D.ietf-core-comi]. NETCONF uses SSH, RESTCONF uses HTTPS, and CORECONF uses CoAP(s) as their respective transport layer protocols. The data is represented in XML under NETCONF, in JSON[RFC8259] under RESTCONF and in CBOR[RFC8949] under CORECONF.¶

                  create
       (-------)  read   +=======+ *
       ( rules )<------->|Rule   |<--|-------->
       (-------)  update |Manager|   NETCONF, RESTCONF or CORECONF
          . read  delete +=======+   request
          .
       +-------+
   <===| R & D |<===
   ===>| C & F |===>
       +-------+

The Rule Manager (RM) is in charge of handling data derived from the YANG Data Model and apply changes to the rules database Figure 5.¶

The RM is a application using the Internet to exchange information, therefore:¶

• for the network-level SCHC, the communication does not require routing. Each of the end-points having an RM and both RMs can be viewed on the same link, therefore wellknown Link Local addresses can be used to identify the device and the core RM. L2 security MAY be deemed as sufficient, if it provides the necessary level of protection.¶
• for application-level SCHC, routing is involved and global IP addresses SHOULD be used. End-to-end encryption is RECOMMENDED.¶

Management messages can also be carried in the negotiation protocol as proposed in [I-D.thubert-intarea-schc-over-ppp]. The RM traffic may be itself compressed by SCHC, especially if CORECONF is used, [I-D.ietf-lpwan-coap-static-context-hc] can be used.¶

7. Security Considerations

SCHC is sensitive to the rules that could be abused to form arbitrary long messages or as a form of attack against the C/D and/or F/R functions, say to generate a buffer overflow and either modify the device or crash it. It is thus critical to ensure that the rules are distributed in a fashion that is protected against tempering, e.g., encrypted and signed.¶

8. IANA Consideration

This document has no request to IANA¶

9. Acknowledgements

The authors would like to thank (in alphabetic order):¶

Authors' Addresses