| TOC |
|
This memo defines the Management Information Base (MIB) for configuring and managing the Optimized Link State Routing protocol version 2 (OLSRv2). The Optimized Link State Routing MIB is structured into state information, performance metrics, and notifications. This additional state and performance information is useful to troubleshoot problems and performance issues of the routing protocol. Different levels of compliance allow implementers to use smaller subsets of all defined objects, allowing for this MIB to be deployed on more constrained routers.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”
This Internet-Draft will expire on July 7, 2011.
Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
1.
Introduction
2.
The Internet-Standard Management Framework
3.
Conventions
4.
Overview
4.1.
Terms
5.
Structure of the MIB Module
5.1.
The Configuration Group
5.2.
The State Group
5.3.
The Performance Group
5.3.1.
Recalculation Performance Objects
5.3.2.
Message-related Performance Objects
5.4.
The Notifications Group
6.
Relationship to Other MIB Modules
6.1.
Relationship to the SNMPv2-MIB
6.2.
Relationship to the NHDP-MIB
6.3.
Relationship to the REPORT-MIB
6.4.
MIB modules required for IMPORTS
7.
Definitions
8.
Security Considerations
9.
IANA Considerations
10.
References
10.1.
Normative References
10.2.
Informative References
Appendix A.
Change Log
Appendix B.
Open Issues
Appendix C.
Note to the RFC Editor
| TOC |
This memo defines the Management Information Base (MIB) for configuring and managing the Optimized Link State Routing protocol version 2 (OLSRv2). The Optimized Link State Routing MIB is structured into state information, performance metrics, and notifications. In addition to configuration, this additional state and performance information is useful to troubleshoot problems and performance issues of the routing protocol. Different levels of compliance allow implementers to use smaller subsets of all defined objects, allowing for this MIB to be deployed on more constrained routers.
| TOC |
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to Section 7 of [RFC3410] (Case, J., Mundy, R., Partain, D., and B. Stewart, “Introduction and Applicability Statements for Internet-Standard Management Framework,” December 2002.).
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in [RFC2578] (McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., “Structure of Management Information Version 2 (SMIv2),” April 1999.), [RFC2579] (McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., “Textual Conventions for SMIv2,” April 1999.), and [RFC2580] (McCloghrie, K., Perkins, D., and J. Schoenwaelder, “Conformance Statements for SMIv2,” April 1999.).
| TOC |
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).
| TOC |
The Optimized Link State Routing Protocol version 2 (OLSRv2) [OLSRv2] (Clausen, T., Dearlove, C., and P. Jacquet, “The Optimized Link State Routing Protocol version 2,” April 2010.) is a table driven, proactive routing protocol, i.e. it exchanges topology information with other routers in the network regularly. OLSRv2 is an optimization of the classical link state routing protocol. Its key concept is that of MultiPoint Relays (MPRs). Each router selects a set of its neighbor routers (which "cover" all of its symmetrically connected 2-hop neighbor routers) as MPRs. MPRs are then used to achieve both flooding reduction and topology reduction.
This MIB document provides management and control capabilities of an OLSRv2 instance, allowing to monitor the state and performance of an OLSRV2 router, as well as to change settings of the deployment.
As OLSRv2 relies on the neighborhood information discovered by NHDP [NHDP] (Clausen, T., Dearlove, C., and J. Dean, “Mobile Ad Hoc Network (MANET) Neighborhood Discovery Protocol (NHDP),” July 2010.), the OLSRv2-MIB is aligned with the NHDP-MIB (Herberg, U., Cole, R., and I. Chakeres, “Definition of Managed Objects for the Neighborhood Discovery Protocol,” July 2010.) [NHDP‑MIB]. In particular, common indexes for router interfaces and discovered neighbors are used, as described in Section 5.2 (The State Group).
| TOC |
The following definitions apply throughout this document:
| TOC |
This section presents the structure of the OLSRv2-MIB module. The objects are arranged into the following structure:
| TOC |
The OLSRv2 router is configured with a set of controls. The authoritative list of configuration controls within the OLSRv2-MIB are found within the MIB module itself. Generally, an attempt was made in developing the OLSRv2-MIB module to support all configuration objects defined in [OLSRv2] (Clausen, T., Dearlove, C., and P. Jacquet, “The Optimized Link State Routing Protocol version 2,” April 2010.). For all of the configuration parameters, the same constraints and default values of these parameters as defined in [OLSRv2] (Clausen, T., Dearlove, C., and P. Jacquet, “The Optimized Link State Routing Protocol version 2,” April 2010.) are followed.
| TOC |
The State Group reports current state information of a router running [OLSRv2] (Clausen, T., Dearlove, C., and P. Jacquet, “The Optimized Link State Routing Protocol version 2,” April 2010.). The OLSRv2-MIB State Group tables were designed to contain the complete set of state information defined within the information bases in [OLSRv2] (Clausen, T., Dearlove, C., and P. Jacquet, “The Optimized Link State Routing Protocol version 2,” April 2010.).
The OLSRv2-MIB State Group tables are constructed as extensions to the corresponding tables within the State Group of the NHDP-MIB (Herberg, U., Cole, R., and I. Chakeres, “Definition of Managed Objects for the Neighborhood Discovery Protocol,” July 2010.) [NHDP‑MIB]. Further, the State Group tables defined in this MIB are aligned with the according tables in the NHDP-MIB (Herberg, U., Cole, R., and I. Chakeres, “Definition of Managed Objects for the Neighborhood Discovery Protocol,” July 2010.) [NHDP‑MIB], as described in Section 6.2 (Relationship to the NHDP-MIB).
| TOC |
The Performance Group reports values relevant to system performance. This section lists objects for OLSRv2 performance monitoring, some of which explicitly appear in the OLSRv2-MIB and others which are obtainable through a combination of base objects from this MIB and reports available through the REPORT-MIB (Cole, R., Macker, J., and A. Morton, “Definition of Managed Objects for Performance Reporting,” July 2010.) [REPORT]. Throughout this section, those objects will be pointed out that are intended as base objects, which are explicitly defined within the OLSRv2-MIB and those objects which are derived through a combination of the base objects within the OLSRv2-MIB and capabilities afforded by the REPORT-MIB.
The objects in this group can be used to examine stability of the Routing Set, the selected MPRs, as well as message scheduling of this router.
| TOC |
The following objects return statistics to the frequency of Routing Set recalculations.
- This object counts each recalculation of the Routing Set.
- This is a Base Object.
- Object name: olsrv2RoutingSetRecalculationCount
- Object type: Counter32
- This object returns the history of the exact timestamps of each time the Routing Set has been recalculated.
- This is a Derived Object to be pulled from the REPORT-MIB. It is derived from, e.g., the olsrv2RoutingSetRecalculationCount Base Object from the OLSRv2-MIB along with the capabilities derived from the reportHistoryGroup from the REPORT-MIB.
- Returns the values that represent a histogram of intervals between Routing Set recalculations.
- This is a Derived Object to be pulled from the REPORT-MIB. It can be derived from, e.g., the olsrv2RoutingSetRecalculationCount Base Object from the OLSRv2-MIB along with the capabilities derived from the reportHistoryGroup from the REPORT-MIB. The network management application could convert this information into the desired histogram.
- This object will divide the given time interval from t0 to t1 into a given number of equal parts. It then creates a histogram for each part and calculate the distances (using the Bhattacharyya distance) between each two adjacent histograms in time. A higher value between two histograms means more difference between the histograms.
- This is a Derived Object to be pulled from the REPORT-MIB, as previously discussed, albeit this is a bit more complex with respect to the management application.
The following objects return statistics to the frequency of recalculating the MPRs of this router.
- This object counts each recalculation of the MPRs of the router.
- This is a Base Object.
- Object name: olsrv2MPRSetRecalculationCount
- Object type: Counter32
- This object returns the history of the exact timestamps of each time the MPRs have been recalculated.
- This is a Derived Object to be pulled from the REPORT-MIB. It is derived from, e.g., the olsrv2MPRSetRecalculationCount Base Object from the OLSRv2-MIB along with the capabilities derived from the reportHistoryGroup from the REPORT-MIB.
- Returns the values that represent a histogram of intervals between MPR recalculations. The histogram includes all changes that have been made after the given time t0 and before the given time t1.
- This is a Derived Object to be pulled from the REPORT-MIB. It can be derived from, e.g., the olsrv2MPRSetRecalculationCount Base Object from the OLSRv2-MIB along with the capabilities derived from the reportHistoryGroup from the REPORT-MIB. The network management application could convert this information into the desired histogram.
- This object will divide the given time interval from t0 to t1 into a given number of equal parts. It then creates a histogram for each part and calculate the distances (using the Bhattacharyya distance) between each two adjacent histograms in time. A higher value between two histograms means more difference between the histograms.
- This is a Derived Object to be pulled from the REPORT-MIB, as previously discussed, albeit this is a bit more complex with respect to the management application.
| TOC |
The following objects return some of the statistics related to TC messages:
- This is a Base Object.
- Object name: olsrv2IfTcMessageXmits
- Object type: Counter32
- This is a Base Object.
- Object name: olsrv2IfTcMessageRecvd
- Object type: Counter32
- This is a Base Object.
- Object name: olsrv2IfTcMessagePeriodicXmits
- Object type: Counter32
- This is a Base Object.
- Object name: olsrv2IfTcMessageTriggeredXmits
- Object type: Counter32
- This is a Base Object.
- Object name: olsrv2IfTcMessageForwardedXmits
- Object type: Counter32
- This object returns the history of the exact timestamps of each TC message that has been sent as well as the type of the message (triggered or periodical). The list of events starts at the given point of time t0 and ends at the given time t1.
- This is a Derived Object to be pulled from the REPORT-MIB. It is derived from, e.g., the olsrv2IfTcMessagePeriodicXmits and olsrv2IfTcMessageTriggeredXmits Base Objects from the OLSRv2-MIB along with the capabilities derived from the reportHistoryGroup from the REPORT-MIB.
- Returns the values (in a 2-dimensional array) that represent a histogram of intervals between TC messages, separated by periodic and triggered TC. The histogram displays the distribution of intervals between two consecutive TC of the same type (triggered or periodical) using a given bin size. It includes all TC that have been sent after the given time t0 and before the given time t1.
- This is a Derived Object to be pulled from the REPORT-MIB. It can be derived from, e.g., the olsrv2IfTcMessagePeriodicXmits and olsrv2IfTcMessageTriggeredXmits Base Objects from the OLSRv2-MIB along with the capabilities derived from the reportHistoryGroup from the REPORT-MIB. The network management application could convert this information into the desired histogram.
- This object will divide the given time interval from t0 to t1 into a given number of equal parts. It then creates a histogram for each part and calculate the distances (using the Bhattacharyya distance) between each two adjacent histograms in time. A higher value between two histograms means more difference between the histograms. For instance, that could happen if suddenly many triggered TC messages are sent, whereas before there have been only very few such triggered messages.
- This is a Derived Object to be pulled from the REPORT-MIB, as previously discussed, albeit this is a bit more complex with respect to the management application.
- This is a Derived Object to be pulled from the reportSampledGroup from the REPORT-MIB. It is derived from, e.g., the olsrv2IfTcMessageXmits Base Object.
- This is a Derived Object to be pulled from the REPORT-MIB. See the previous discussion.
- This is a Base Object.
- Object name: olsrv2IfHelloMessageXmitAccumulatedSize
- Object type: Counter32
- This is a Base Object.
- Object name: olsrv2IfHelloMessageRecvdAccumulatedSize
- Object type: Counter32
- This is a Derived Object to be pulled from the REPORT-MIB. See the previous discussion.
- This is a Derived Object to be pulled from the REPORT-MIB. See the previous discussion.
- This is a Base Object.
- Object name: olsrv2IfHelloMessageXmitAccumulatedSymmetricNeighborCount
- Object type: Counter32
| TOC |
The Notifications Subtree contains the list of notifications supported within the OLSRv2-MIB and their intended purpose or utility.
The same mechanisms for improving the network performance by reducing the number of notifications apply as defined in Section 5.4 of [NHDP‑MIB] (Herberg, U., Cole, R., and I. Chakeres, “Definition of Managed Objects for the Neighborhood Discovery Protocol,” July 2010.). The Notifications Group contains Control, Objects and States, where the Control contains definitions of objects to control the frequency of notifications being sent. The Objects define the supported notifications and the State is used to define additional information to be carried within the notifications.
| TOC |
This section specifies the relationship of the MIB modules contained in this document to other standards, particularly to standards containing other MIB modules. Definitions imported from other MIB modules and other MIB modules that SHOULD be implemented in conjunction with the MIB module contained within this document are identified in this section.
| TOC |
The 'system' group in the SNMPv2-MIB [RFC3418] (Presuhn, R., “Management Information Base (MIB) for the Simple Network Management Protocol (SNMP),” December 2002.) is defined as being mandatory for all systems, and the objects apply to the entity as a whole. The 'system' group provides identification of the management entity and certain other system-wide data. The OLSRv2-MIB does not duplicate those objects.
| TOC |
OLSRv2 depends on the neighborhood information that is discovered by [NHDP] (Clausen, T., Dearlove, C., and J. Dean, “Mobile Ad Hoc Network (MANET) Neighborhood Discovery Protocol (NHDP),” July 2010.). In order access the Objects relating to discovered neighbors, the State Group tables of the NHDP-MIB [NHDP‑MIB] (Herberg, U., Cole, R., and I. Chakeres, “Definition of Managed Objects for the Neighborhood Discovery Protocol,” July 2010.) are aligned with this MIB. This is accomplished through the definition of two TEXTUAL-CONVENTIONS in the NHDP-MIB: the NeighborInterfaceId and the NeighborRouterId. These object types are used to develop indexes into common NHDP-MIB and routing protocol State Group tables. These objects are locally significant but should be locally common to the NHDP-MIB and the OLSRv2-MIB implemented on a common networked router. This will allow for improved cross referencing of information across the two MIBs.
| TOC |
This document describes several Performance Management metrics for the management of OLSRv2 routers. However, not all of these metrics are explicitly defined solely within the context of this OLSRv2-MIB. Some of these metrics are obtained through joint interaction between this MIB and the REPORT-MIB [REPORT]. This OLSRv2-MIB defines the minimum necessary objects (often of type COUNTER) which form the underlying basis for more sophisticated Performance Management reporting available in conjunction with the REPORT-MIB. See Section 5.3 (The Performance Group) for a description of the performance metrics for OLSRv2.
| TOC |
The following OLSRv2-MIB module IMPORTS objects from NHDP-MIB [NHDP‑MIB] (Herberg, U., Cole, R., and I. Chakeres, “Definition of Managed Objects for the Neighborhood Discovery Protocol,” July 2010.), SNMPv2-SMI [RFC2578] (McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., “Structure of Management Information Version 2 (SMIv2),” April 1999.), SNMPv2-TC [RFC2579] (McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., “Textual Conventions for SMIv2,” April 1999.), SNMPv2-CONF [RFC2580] (McCloghrie, K., Perkins, D., and J. Schoenwaelder, “Conformance Statements for SMIv2,” April 1999.), IF-MIB [RFC2863] (McCloghrie, K. and F. Kastenholz, “The Interfaces Group MIB,” June 2000.), INET-ADDRESS-MIB [RFC4001] (Daniele, M., Haberman, B., Routhier, S., and J. Schoenwaelder, “Textual Conventions for Internet Network Addresses,” February 2005.), and SMIng [RFC3781] (Strauss, F. and J. Schoenwaelder, “Next Generation Structure of Management Information (SMIng) Mappings to the Simple Network Management Protocol (SNMP),” May 2004.).
| TOC |
This section contains the MANET-OLSRv2-MIB module defined by the specification.
MANET-OLSRv2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Counter32,
Integer32, Unsigned32, mib-2, TimeTicks,
NOTIFICATION-TYPE
FROM SNMPv2-SMI --[RFC2578]
TimeStamp, TruthValue, RowStatus
FROM SNMPv2-TC --[RFC2579]
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF --[STD58]
InetAddressType, InetAddress,
InetAddressPrefixLength
FROM INET-ADDRESS-MIB --[RFC3291]
InterfaceIndexOrZero
FROM IF-MIB --[RFC2863]
Float32TC
FROM FLOAT-TC-MIB --[RFCXXXX]
NeighborRouterId
FROM NHDP-MIB -- [draft-ietf-manet-nhdp-mib]
;
manetOlsrv2MIB MODULE-IDENTITY
LAST-UPDATED "201101021000Z" -- January 02, 2011
ORGANIZATION "IETF MANET Working Group"
CONTACT-INFO
"WG E-Mail: manet@ietf.org
WG Chairs: ian.chakeres@gmail.com
jmacker@nrl.navy.mil
Editors: Ulrich Herberg
Ecole Polytechnique
LIX
91128 Palaiseau Cedex
France
+33 1 69 33 41 26
ulrich@herberg.name
http://www.herberg.name/
Thomas Heide Clausen
Ecole Polytechnique
LIX
91128 Palaiseau Cedex
France
http://www.thomasclausen.org/
T.Clausen@computer.org
Robert G. Cole
US Army CERDEC
Space and Terrestrial Communications
328 Hopkins Road
Bldg 245, Room 16
Aberdeen Proving Ground, MD 21005
USA
+1 410 278-6779
robert.g.cole@us.army.mil
http://www.cs.jhu.edu/~rgcole/"
DESCRIPTION
"This MIB module contains managed object definitions
for the Manet OLSRv2 routing process defined in the
Optimized Link State Routing Protocol version 2
defined in [RFCXXXX].
Copyright (C) The IETF Trust (2009). This version
of this MIB module is part of RFC xxxx; see the RFC
itself for full legal notices."
-- Revision History
REVISION "201101021000Z" -- Jan 02, 2011
DESCRIPTION
"The sixth version of this MIB module,
published as draft-ietf-manet-olsrv2-mib-03.txt.
Changes made in this version include
the addition of the NotificationGroup,
updates to the ConformanceGroup and
fixes discovered from running smilint.
Finally, added the olsrv2OrigIpAddrType and
olsrv2OrigIpAddr objects to the
Configuration Group to identify
this OLSRv2 router."
REVISION "201007121000Z" -- July 12, 2010
DESCRIPTION
"The fifth version of this MIB module,
published as draft-ietf-manet-olsrv2-mib-02.txt.
Many editorial changes, Security Considerations,
corrected errors in the MIB."
REVISION "200911091000Z" -- Nov 9, 2009
DESCRIPTION
"The fourth version of this MIB module,
published as draft-ietf-manet-olsrv2-mib-01.txt.
Added Performance objects, and updated to newest
OLSRv2 draft."
REVISION "200905031300Z" -- May 3, 2009
DESCRIPTION
"Third draft of this MIB module published as
draft-ietf-manet-olsrv2-mib-00.txt. Rev'd
as a new MANET WG document. Cleaned up SYNTAX
errors and other typos found by 'smilint'."
REVISION "200902151300Z" -- February 15, 2009
DESCRIPTION
"Second draft of this MIB module published as
draft-cole-manet-olsrv2-mib-01.txt. Cleaned up
table indexing and aligned with the NHDP-MIB
draft (draft-cole-manet-nhdp-mib-01.txt)."
REVISION "200810241300Z" -- October 24, 2008
DESCRIPTION
"Initial draft of this MIB module published as
draft-cole-manet-olsrv2-mib-00.txt."
-- RFC-Editor assigns XXXX
::= { mib-2 998 } -- to be assigned by IANA
--
-- TEXTUAL CONVENTIONs
--
-- none
--
-- Top-Level Object Identifier Assignments
--
olsrv2MIBNotifications OBJECT IDENTIFIER ::= { manetOlsrv2MIB 0 }
olsrv2MIBObjects OBJECT IDENTIFIER ::= { manetOlsrv2MIB 1 }
olsrv2MIBConformance OBJECT IDENTIFIER ::= { manetOlsrv2MIB 2 }
--
-- olsrv2ConfigurationGroup
--
-- Contains the OLSRv2 objects that configure specific
-- options that determine the overall performance and operation
-- of the OLSRv2 routing process.
--
olsrv2ConfigurationGroup OBJECT IDENTIFIER ::= {olsrv2MIBObjects 1}
olsrv2OrigIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2OrigIpAddr, as defined
in the InetAddress MIB [RFC 4001].
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage.
"
REFERENCE
"The OLSRv2 draft."
::= { olsrv2ConfigurationGroup 1 }
olsrv2OrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An address which is unique (within the MANET)
to a router. A router MUST select an
originator address; it MAY choose one of
its interface addresses as its originator
address. If it selects a routable address
then this MUST be one which this router will
accept as destination. An originator address
MUST NOT have a prefix length, except for
when included in an Address Block where it MAY
be associated with a prefix of maximum prefix
length (e.g., if the originator address is an
IPv6 address, it MUST have either no prefix
length, or have a prefix length of 128).
An originator address may be a routable or
non-routable address.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage.
"
REFERENCE
"The OLSRv2 draft."
::= { olsrv2ConfigurationGroup 2 }
--
-- Local history times
--
olsrv2OHoldTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2OHoldTime corresponds to
O_HOLD_TIME of OLSRv2.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 30000 }
::= { olsrv2ConfigurationGroup 3 }
--
-- Message intervals
--
olsrv2TcInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2TcInterval corresponds to
TC_INTERVAL of OLSRv2.
The following constraints apply to this
parameter:
olsrv2TcInterval > 0
olsrv2TcInterval >= olsrv2TcMinInterval
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 5000 }
::= { olsrv2ConfigurationGroup 4 }
olsrv2TcMinInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2TcMinInterval corresponds to
TC_MIN_INTERVAL of OLSRv2.
The following constraint applies to this
parameter:
olsrv2TcInterval >= olsrv2TcMinInterval
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 1250 }
::= { olsrv2ConfigurationGroup 5 }
--
-- Advertised information validity times
--
olsrv2THoldTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2THoldTime corresponds to
T_HOLD_TIME of OLSRv2.
The following constraint applies to this
parameter:
olsrv2THoldTime >= olsrv2TcInterval
If TC messages can be lost, then
olsrv2THoldTime SHOULD be
significantly greater than olsrv2TcInterval;
a value >= 3 x olsrv2TcInterval is RECOMMENDED.
olsrv2THoldTime MUST be representable as
described in [timetlv].
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 15000 }
::= { olsrv2ConfigurationGroup 6 }
olsrv2AHoldTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2AHoldTime corresponds to
A_HOLD_TIME of OLSRv2.
If TC messages can be lost, then
olsrv2AHoldTime SHOULD be
significantly greater than olsrv2TcInterval;
a value >= 3 x olsrv2TcInterval is
RECOMMENDED.
olsrv2AHoldTime MUST be representable as
described in [timetlv].
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 15000 }
::= { olsrv2ConfigurationGroup 7 }
--
-- Received message validity times
--
olsrv2RxHoldTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2RxHoldTime corresponds to
RX_HOLD_TIME of OLSRv2.
The following constraint applies to this
parameter:
olsrv2RxHoldTime > 0
This parameter SHOULD be greater
than the maximum difference in time that a
message may take to traverse the MANET,
taking into account any message forwarding
jitter as well as propagation, queuing,
and processing delays.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 30000 }
::= { olsrv2ConfigurationGroup 8 }
olsrv2PHoldTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2PHoldTime corresponds to
P_HOLD_TIME of OLSRv2.
The following constraint applies to this
parameter:
olsrv2PHoldTime > 0
This parameter SHOULD be greater
than the maximum difference in time that a
message may take to traverse the MANET,
taking into account any message forwarding
jitter as well as propagation, queuing,
and processing delays.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 30000 }
::= { olsrv2ConfigurationGroup 9 }
olsrv2FHoldTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2RxHoldTime corresponds to
RX_HOLD_TIME of OLSRv2.
The following constraint applies to this
parameter:
olsrv2FHoldTime > 0
This parameter SHOULD be greater
than the maximum difference in time that a
message may take to traverse the MANET,
taking into account any message forwarding
jitter as well as propagation, queuing,
and processing delays.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 30000 }
::= { olsrv2ConfigurationGroup 10 }
--
-- Jitter times
--
olsrv2TpMaxJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2TpMaxJitter corresponds to
TP_MAXJITTER of OLSRv2.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 500 }
::= { olsrv2ConfigurationGroup 11 }
olsrv2TtMaxJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2TtMaxJitter corresponds to
TT_MAXJITTER of OLSRv2.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 500 }
::= { olsrv2ConfigurationGroup 12 }
olsrv2FMaxJitter OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2FMaxJitter corresponds to
F_MAXJITTER of OLSRv2.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 500 }
::= { olsrv2ConfigurationGroup 13 }
--
-- Hop limits
--
olsrv2TcHopLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "hops"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2TcHopLimit corresponds to
TC_HOP_LIMIT of OLSRv2.
The following constraint applies to this
parameter:
The maximum value of
olsrv2TcHopLimit >= the network diameter
in hops, a value of 255 is RECOMMENDED.
All values of olsrv2TcHopLimit >= 2.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 255 }
::= { olsrv2ConfigurationGroup 14 }
--
-- Willingness
--
olsrv2Willingness OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"olsrv2Willingness corresponds to
WILLINGNESS of OLSRv2.
The following constraint applies to this
parameter:
WILL_NEVER (0) <= olsrv2Willingness <=
WILL_ALWAYS (15)
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage."
REFERENCE
"The OLSRv2 draft.
Section 5 on Protocol Parameters."
DEFVAL { 7 }
::= { olsrv2ConfigurationGroup 15 }
--
-- olsrv2StateGroup
--
-- Contains information describing the current state of
-- the OLSRv2 process.
olsrv2StateGroup OBJECT IDENTIFIER ::= { olsrv2MIBObjects 2 }
olsrv2RouterStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the OLSRv2 router
routing process."
::= { olsrv2StateGroup 1 }
--
-- Local Information Base - as defined in [NHDP],
-- extended by the addition of an Originator Set,
-- defined in Section 6.1 and a Local Attached
-- Network Set, defined in Section 6.2.
--
--
-- Originator Set
--
olsrv2LibOrigSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2LibOrigSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router's Originator Set records addresses
that were recently used as originator addresses
by this router. If a router's originator
address is immutable then this set is always
empty and MAY be omitted."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 2 }
olsrv2LibOrigSetEntry OBJECT-TYPE
SYNTAX Olsrv2LibOrigSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A router's Originator Set consists of
Originator Tuples:
(O_orig_addr, O_time)."
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2LibOrigSetIpAddr }
::= { olsrv2LibOrigSetTable 1 }
Olsrv2LibOrigSetEntry ::=
SEQUENCE {
olsrv2LibOrigSetIpAddrType
InetAddressType,
olsrv2LibOrigSetIpAddr
InetAddress,
olsrv2LibOrigSetExpireTime
TimeStamp
}
olsrv2LibOrigSetIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2LibOrigSetIpAddr, as defined
in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2LibOrigSetEntry 1 }
olsrv2LibOrigSetIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A recently used originator address
by this router."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2LibOrigSetEntry 2 }
olsrv2LibOrigSetExpireTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the time at which this
entry expires and MUST be removed."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2LibOrigSetEntry 3 }
--
-- Local Attached Network Set
--
olsrv2LibLocAttNetSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2LibLocAttNetSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router's Local Attached Network Set records
its local non-OLSRv2 interfaces via which it
can act as gateways to other networks. The
Local Attached Network Set is not modified by
this protocol."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 3 }
olsrv2LibLocAttNetSetEntry OBJECT-TYPE
SYNTAX Olsrv2LibLocAttNetSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entries include the Local Attached
Network Tuples:
(AL_net_addr, AL_dist)
where:
AL_net_addr is the network address
of an attached network which can
be reached via this router.
AL_dist is the number of hops to
the network with address AL_net_addr
from this router."
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2LibLocAttNetSetIpAddr,
olsrv2LibLocAttNetSetIpAddrPrefixLen }
::= { olsrv2LibLocAttNetSetTable 1 }
Olsrv2LibLocAttNetSetEntry ::=
SEQUENCE {
olsrv2LibLocAttNetSetIpAddrType
InetAddressType,
olsrv2LibLocAttNetSetIpAddr
InetAddress,
olsrv2LibLocAttNetSetIpAddrPrefixLen
InetAddressPrefixLength,
olsrv2LibLocAttNetSetDistance
Unsigned32,
olsrv2LibLocAttNetSetRowStatus
RowStatus
}
olsrv2LibLocAttNetSetIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2LibLocAttNetSetIpAddr, as defined
in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2LibLocAttNetSetEntry 1 }
olsrv2LibLocAttNetSetIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the network address of an attached
network which can be reached via this router."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2LibLocAttNetSetEntry 2 }
olsrv2LibLocAttNetSetIpAddrPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
olsrv2LibLocAttNetSetIpAddr field."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2LibLocAttNetSetEntry 3 }
olsrv2LibLocAttNetSetDistance OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
UNITS "hops"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the number of hops
to the network with address
olsrv2LibLocAttNetSetIpAddr from this router."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2LibLocAttNetSetEntry 4 }
olsrv2LibLocAttNetSetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object permits management of the table
by facilitating actions such as row creation,
construction, and destruction. The value of
this object has no effect on whether other
objects in this conceptual row can be
modified."
::= { olsrv2LibLocAttNetSetEntry 5 }
--
-- Interface Information Bases - as defined in
-- [NHDP], one Interface Information Base for
-- each OLSRv2 interface.
--
-- Note: The IIB is fully defined in the NHDP
-- specification and its associated MIB.
--
-- Neighbor Information Base - as defined in [NHDP],
-- extended by the addition of five elements to
-- each Neighbor Tuple, as defined in Section 8.
--
--
-- Neighbor Set
--
olsrv2NibNeighborSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2NibNeighborSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router's Neighbor Set records all network
addresses of each 1-hop neighbor. It consists
of Neighbor Tuples, each representing a single
1-hop neighbor. "
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 4 }
olsrv2NibNeighborSetEntry OBJECT-TYPE
SYNTAX Olsrv2NibNeighborSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each Neighbor Tuple in the Neighbor Set, defined
in [NHDP], has these additional elements:
N_orig_addr
N_willingness
N_mpr
N_mpr_selector
N_advertised
defined here as extensions."
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2NibNeighborSetRouterId }
::= { olsrv2NibNeighborSetTable 1 }
Olsrv2NibNeighborSetEntry ::=
SEQUENCE {
olsrv2NibNeighborSetRouterId
NeighborRouterId,
olsrv2NibNeighborSetNIpAddrType
InetAddressType,
olsrv2NibNeighborSetNOrigAddr
InetAddress,
olsrv2NibNeighborSetNWilliness
Unsigned32,
olsrv2NibNeighborSetNMpr
TruthValue,
olsrv2NibNeighborSetNMprSelector
TruthValue,
olsrv2NibNeighborSetNAdvertised
TruthValue
}
olsrv2NibNeighborSetRouterId OBJECT-TYPE
SYNTAX NeighborRouterId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object olsrv2NibNeighborSetRouterId is
the locally assigned ID of the remote router
referenced in this row. The IP addrs
associated with this router is contained
in the NHDP-MIB's 'nhdpDiscIfSetTable'.
"
REFERENCE
"The OLSRv2 draft."
::= { olsrv2NibNeighborSetEntry 1 }
olsrv2NibNeighborSetNIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2NibNeighborSetNOrigAddr, as defined
in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2NibNeighborSetEntry 2 }
olsrv2NibNeighborSetNOrigAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the originator IP address of that
neighbor."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2NibNeighborSetEntry 3 }
olsrv2NibNeighborSetNWilliness OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, N_willingness, is the neighbor
router's willingness to be selected as an MPR, in
the range from WILL_NEVER (0) to WILL_ALWAYS
(15), both inclusive."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2NibNeighborSetEntry 4 }
olsrv2NibNeighborSetNMpr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, N_mpr, is a boolean flag,
describing if this neighbor is selected as
an MPR by this router.
When set to 'true', this neighbor is selected
as an MPR by this router. When set to 'false',
it is not selected by this router as an MPR."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2NibNeighborSetEntry 5 }
olsrv2NibNeighborSetNMprSelector OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, N_mpr_selector, is a boolean flag,
describing if this neighbor has selected this router
as an MPR, i.e. is an MPR selector of this router.
When set to 'true', then this router is selected as
an MPR by the neighbor router. When set to 'false',
then this router is not selected by the neighbor
as an MPR"
REFERENCE
"The OLSRv2 draft."
::= { olsrv2NibNeighborSetEntry 6 }
olsrv2NibNeighborSetNAdvertised OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, N_mpr_selector, is a boolean flag, describing if
this router has elected to advertise a link to this neighbor
in its TC messages."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2NibNeighborSetEntry 7 }
olsrv2NibNeighborSetTableAnsn OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Advertised Neighbor Sequence Number (ANSN), is
a variable, whose value is included in TC messages to
indicate the freshness of the information transmitted."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 5 }
--
-- Topology Information Base - this Information
-- Base is specific to OLSRv2, and is defined in
-- Section 9.
--
--
-- Advertising Remote Router Set
--
olsrv2TibAdRemoteRouterSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2TibAdRemoteRouterSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router's Advertising Remote Router Set records
information describing each remote router in the
network that transmits TC messages."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 6 }
olsrv2TibAdRemoteRouterSetEntry OBJECT-TYPE
SYNTAX Olsrv2TibAdRemoteRouterSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A router's Advertised Neighbor Set Table entry
consists of Advertising Remote Router Tuples:
(AR_orig_addr, AR_seq_number, AR_time)
Addresses associated with this router are
found in the NHDP-MIB's 'nhdpDiscIfSetTable'."
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2TibAdRemoteRouterSetRouterId }
::= { olsrv2TibAdRemoteRouterSetTable 1 }
Olsrv2TibAdRemoteRouterSetEntry ::=
SEQUENCE {
olsrv2TibAdRemoteRouterSetIpAddrType
InetAddressType,
olsrv2TibAdRemoteRouterSetIpAddr
InetAddress,
olsrv2TibAdRemoteRouterSetRouterId
NeighborRouterId,
olsrv2TibAdRemoteRouterSetMaxSeqNo
Unsigned32,
olsrv2TibAdRemoteRouterSetExpireTime
TimeStamp
}
olsrv2TibAdRemoteRouterSetIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2TibAdRemoteRouterSetIpAddr,
as defined in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAdRemoteRouterSetEntry 1 }
olsrv2TibAdRemoteRouterSetIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the originator address of a received
TC message."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAdRemoteRouterSetEntry 2 }
olsrv2TibAdRemoteRouterSetRouterId OBJECT-TYPE
SYNTAX NeighborRouterId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is an additional index for each
Remote Router's IfAddr associated with the
olsrv2TibAdRemoteRouterSetIpAddr."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAdRemoteRouterSetEntry 3 }
olsrv2TibAdRemoteRouterSetMaxSeqNo OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the greatest ANSN in any TC message
received which originated from the router
with originator address
olsrv2TibAdRemoteRouterSetIpAddr."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAdRemoteRouterSetEntry 4 }
olsrv2TibAdRemoteRouterSetExpireTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the time at which this
Tuple expires and MUST be removed."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAdRemoteRouterSetEntry 5 }
--
-- Router Topology Set
--
olsrv2TibRouterTopologySetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2TibTopologySetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router's Router Topology Set records topology
information about the network."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 7 }
olsrv2TibRouterTopologySetEntry OBJECT-TYPE
SYNTAX Olsrv2TibTopologySetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It consists of Router Topology Tuples:
(TR_from_orig_addr, TR_to_orig_addr,
TR_seq_number, TR_time)"
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2TibRouterTopologySetFromOrigIpAddr }
::= { olsrv2TibRouterTopologySetTable 1 }
Olsrv2TibTopologySetEntry ::=
SEQUENCE {
olsrv2TibRouterTopologySetFromOrigIpAddrType
InetAddressType,
olsrv2TibRouterTopologySetFromOrigIpAddr
InetAddress,
olsrv2TibRouterTopologySetToOrigIpAddrType
InetAddressType,
olsrv2TibRouterTopologySetToOrigIpAddr
InetAddress,
olsrv2TibRouterTopologySetSeqNo
Unsigned32,
olsrv2TibRouterTopologySetExpireTime
TimeStamp
}
olsrv2TibRouterTopologySetFromOrigIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2TibRouterTopologySetFromOrigIpAddr,
as defined in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRouterTopologySetEntry 1 }
olsrv2TibRouterTopologySetFromOrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the originator address of a router which can
reach the router with originator address TR_to_orig_addr
in one hop, note that this does not include a prefix length"
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRouterTopologySetEntry 2 }
olsrv2TibRouterTopologySetToOrigIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2TibRouterTopologySetToOrigIpAddr,
as defined in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRouterTopologySetEntry 3 }
olsrv2TibRouterTopologySetToOrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the originator address of a router which can be
reached by the router with originator address
TR_to_orig_addr in one hop, note that this does
not include a prefix length."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRouterTopologySetEntry 4 }
olsrv2TibRouterTopologySetSeqNo OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the greatest ANSN in any TC message
received which originated from the router
with originator address TR_from_orig_addr
(i.e., which contributed to the information
contained in this Tuple)."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRouterTopologySetEntry 5 }
olsrv2TibRouterTopologySetExpireTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the time at which this
Tuple expires and MUST be removed."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRouterTopologySetEntry 6 }
--
-- Routable Address Topology Set
--
olsrv2TibRoutableAddressTopologySetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2TibRoutableAddressTopologySetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router's Routable Address Topology Set records topology
information about the routable addresses within the MANET,
and via which routers they may be reached."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 8 }
olsrv2TibRoutableAddressTopologySetEntry OBJECT-TYPE
SYNTAX Olsrv2TibRoutableAddressTopologySetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It consists of Router Topology Tuples:
(TA_from_orig_addr, TA_to_orig_addr,
TA_seq_number, TA_time)"
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2TibRouterTopologySetFromOrigIpAddr }
::= { olsrv2TibRoutableAddressTopologySetTable 1 }
Olsrv2TibRoutableAddressTopologySetEntry ::=
SEQUENCE {
olsrv2TibRoutableAddressTopologySetFromOrigIpAddrType
InetAddressType,
olsrv2TibRoutableAddressTopologySetFromOrigIpAddr
InetAddress,
olsrv2TibRoutableAddressTopologySetToOrigIpAddrType
InetAddressType,
olsrv2TibRoutableAddressTopologySetToOrigIpAddr
InetAddress,
olsrv2TibRoutableAddressTopologySetSeqNo
Unsigned32,
olsrv2TibRoutableAddressTopologySetExpireTime
TimeStamp
}
olsrv2TibRoutableAddressTopologySetFromOrigIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the
olsrv2TibRoutableAddressTopologySetFromOrigIpAddr,
as defined in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutableAddressTopologySetEntry 1 }
olsrv2TibRoutableAddressTopologySetFromOrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the originator address of a router which can
reach the router with routable address TA_dest_addr
in one hop."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutableAddressTopologySetEntry 2 }
olsrv2TibRoutableAddressTopologySetToOrigIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2TibRouterTopologySetToOrigIpAddr,
as defined in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutableAddressTopologySetEntry 3 }
olsrv2TibRoutableAddressTopologySetToOrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a routable address of a router which can be
reached by the router with originator address
TA_from_orig_addr in one hop."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutableAddressTopologySetEntry 4 }
olsrv2TibRoutableAddressTopologySetSeqNo OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the greatest ANSN in any TC message
received which originated from the router
with originator address TA_from_orig_addr
(i.e., which contributed to the information
contained in this Tuple)."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutableAddressTopologySetEntry 5 }
olsrv2TibRoutableAddressTopologySetExpireTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the time at which this
Tuple expires and MUST be removed."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutableAddressTopologySetEntry 6 }
--
-- Attached Network Set
--
olsrv2TibAttNetworksSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2TibAttNetworksSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router's Attached Network Set records information
about networks (which may be outside the MANET)
attached to other routers and their routable addresses."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 9 }
olsrv2TibAttNetworksSetEntry OBJECT-TYPE
SYNTAX Olsrv2TibAttNetworksSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It consists of Attached Network Tuples:
(AN_orig_addr, AN_net_addr,
AN_dist, AN_seq_number, AN_time)"
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2TibAttNetworksSetNetIpAddrType,
olsrv2TibAttNetworksSetNetIpAddr,
olsrv2TibAttNetworksSetNetIpAddrPrefixLen }
::= { olsrv2TibAttNetworksSetTable 1 }
Olsrv2TibAttNetworksSetEntry ::=
SEQUENCE {
olsrv2TibAttNetworksSetOrigIpAddr
InetAddress,
olsrv2TibAttNetworksSetNetIpAddrType
InetAddressType,
olsrv2TibAttNetworksSetNetIpAddr
InetAddress,
olsrv2TibAttNetworksSetNetIpAddrPrefixLen
InetAddressPrefixLength,
olsrv2TibAttNetworksSetSeqNo
Unsigned32,
olsrv2TibAttNetworksSetDist
Unsigned32,
olsrv2TibAttNetworksSetExpireTime
TimeStamp
}
olsrv2TibAttNetworksSetOrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the originator address of a
router which can act as gateway to the
network with address AN_net_addr,
note that this does not include a
prefix length."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAttNetworksSetEntry 1 }
olsrv2TibAttNetworksSetNetIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the olsrv2TibAttNetworksSetNetIpAddr,
as defined in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAttNetworksSetEntry 2 }
olsrv2TibAttNetworksSetNetIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is is the network address of an
attached network, which may be reached via
the router with originator address AN_orig_addr."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAttNetworksSetEntry 3 }
olsrv2TibAttNetworksSetNetIpAddrPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
olsrv2TibAttNetworksSetNetIpAddr field."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAttNetworksSetEntry 4 }
olsrv2TibAttNetworksSetSeqNo OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The is the greatest ANSN in any TC
message received which originated from the
router with originator address AN_orig_addr
(i.e. which contributed to the information
contained in this Tuple)."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAttNetworksSetEntry 5 }
olsrv2TibAttNetworksSetDist OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "hops"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The is the number of hops to the network
with address AN_net_addr from the router with
originator address AN_orig_addr."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAttNetworksSetEntry 6 }
olsrv2TibAttNetworksSetExpireTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the time at which this
Tuple expires and MUST be removed."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibAttNetworksSetEntry 7 }
--
-- Routing Set
--
olsrv2TibRoutingSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2TibRoutingSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router's Routing Set records the first hop along a
selected path to each destination for which any such
path is known."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 10 }
olsrv2TibRoutingSetEntry OBJECT-TYPE
SYNTAX Olsrv2TibRoutingSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It consists of Routing Tuples:
(R_dest_addr, R_next_iface_addr,
R_local_iface_addr, R_dist)"
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2TibRoutingSetDestIpAddrType,
olsrv2TibRoutingSetDestIpAddr,
olsrv2TibRoutingSetDestIpAddrPrefLen }
::= { olsrv2TibRoutingSetTable 1 }
Olsrv2TibRoutingSetEntry ::=
SEQUENCE {
olsrv2TibRoutingSetDestIpAddrType
InetAddressType,
olsrv2TibRoutingSetDestIpAddr
InetAddress,
olsrv2TibRoutingSetDestIpAddrPrefLen
InetAddressPrefixLength,
olsrv2TibRoutingSetNextIfIpAddr
InetAddress,
olsrv2TibRoutingSetLocalIfIpAddr
InetAddress,
olsrv2TibRoutingSetDist
Unsigned32
}
olsrv2TibRoutingSetDestIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the olsrv2TibRoutingSetDestIpAddr
and olsrv2TibRoutingSetNextIfIpAddr,
as defined in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutingSetEntry 1 }
olsrv2TibRoutingSetDestIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the address of the destination,
either the address of an interface of
a destination router, or the network
address of an attached network."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutingSetEntry 2 }
olsrv2TibRoutingSetDestIpAddrPrefLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
olsrv2TibRoutingSetDestNetIpAddr field.
Note: This definition needs to be consistent
with the current forwarding table MIB description.
Specifically, it should allow for longest prefix
matching of network addresses."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutingSetEntry 3 }
olsrv2TibRoutingSetNextIfIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the OLSRv2 interface address of the
'next hop' on the selected path to the
destination."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutingSetEntry 4 }
olsrv2TibRoutingSetLocalIfIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the address of the local OLSRv2
interface over which a packet MUST be
sent to reach the destination by the
selected path."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutingSetEntry 5 }
olsrv2TibRoutingSetDist OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
UNITS "hops"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The is the number of hops on the selected
path to the destination."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2TibRoutingSetEntry 6 }
--
-- Received Message Information Base (RMIB) - records information
-- required to ensure that a message is processed at most
-- once and is forwarded at most once per OLSRv2 interface
-- of a router, using MPR flooding.
--
-- Note: Is it appropriate or necessary to put the
-- level of detail found in the Processing and
-- Forwarding Information Base into the OLSRv2-MIB?
--
-- Received Set
--
olsrv2RmibReceivedSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2RmibReceivedSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router has a Received Set per OLSRv2 interface.
Each Received Set records the signatures of messages
which have been received over that OLSRv2 interface."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 11 }
olsrv2RmibReceivedSetEntry OBJECT-TYPE
SYNTAX Olsrv2RmibReceivedSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each consists of Received Tuples:
(RX_type, RX_orig_addr, RX_seq_number, RX_time)"
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2RmibReceivedIfIndex,
olsrv2RmibReceivedSetOrigIpAddr,
olsrv2RmibReceivedSetSeqNo }
::= { olsrv2RmibReceivedSetTable 1 }
Olsrv2RmibReceivedSetEntry ::=
SEQUENCE {
olsrv2RmibReceivedIfIndex
InterfaceIndexOrZero,
olsrv2RmibReceivedSetMsgType
Unsigned32,
olsrv2RmibReceivedSetOrigIpAddrType
InetAddressType,
olsrv2RmibReceivedSetOrigIpAddr
InetAddress,
olsrv2RmibReceivedSetSeqNo
Unsigned32,
olsrv2RmibReceivedSetExpireTime
TimeStamp
}
olsrv2RmibReceivedIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of an interface. Used for cross
indexing into other OLSRv2 tables and other
MIBs."
::= { olsrv2RmibReceivedSetEntry 1 }
olsrv2RmibReceivedSetMsgType OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the received Message Type."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibReceivedSetEntry 2 }
olsrv2RmibReceivedSetOrigIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2RmibReceivedSetOrigIpAddr,
as defined in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibReceivedSetEntry 3 }
olsrv2RmibReceivedSetOrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the originator address of the received
message, note that this does not include a
prefix length."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibReceivedSetEntry 4 }
olsrv2RmibReceivedSetSeqNo OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the message sequence number of the received
message."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibReceivedSetEntry 5 }
olsrv2RmibReceivedSetExpireTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the time at which this Tuple
expires and MUST be removed."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibReceivedSetEntry 6 }
--
-- Processed Set
--
olsrv2RmibProcessedSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2RmibProcessedSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router has a single Processed Set which
records signatures of messages which have
been processed by the router."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 12 }
olsrv2RmibProcessedSetEntry OBJECT-TYPE
SYNTAX Olsrv2RmibProcessedSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each consists of Processed Tuples:
(P_type, P_orig_addr, P_seq_number, P_time)"
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2RmibProcessedSetOrigIpAddr,
olsrv2RmibProcessedSetSeqNo }
::= { olsrv2RmibProcessedSetTable 1 }
Olsrv2RmibProcessedSetEntry ::=
SEQUENCE {
olsrv2RmibProcessedSetMsgType
Unsigned32,
olsrv2RmibProcessedSetOrigIpAddrType
InetAddressType,
olsrv2RmibProcessedSetOrigIpAddr
InetAddress,
olsrv2RmibProcessedSetSeqNo
Unsigned32,
olsrv2RmibProcessedSetExpireTime
TimeStamp
}
olsrv2RmibProcessedSetMsgType OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the processed Message Type."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibProcessedSetEntry 1 }
olsrv2RmibProcessedSetOrigIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2RmibProcessedSetOrigIpAddr, as defined
in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibProcessedSetEntry 2 }
olsrv2RmibProcessedSetOrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the originator address of the processed
message, note that this does not include a
prefix length."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibProcessedSetEntry 3 }
olsrv2RmibProcessedSetSeqNo OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the message sequence number of the processed
message."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibProcessedSetEntry 4 }
olsrv2RmibProcessedSetExpireTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the time at which this Tuple
expires and MUST be removed."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibProcessedSetEntry 5 }
--
-- Forwarded Set
--
olsrv2RmibForwardedSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2RmibForwardedSetEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A router has a single Forwarded Set which records
signatures of messages which have been forwarded by
the router."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2StateGroup 13 }
olsrv2RmibForwardedSetEntry OBJECT-TYPE
SYNTAX Olsrv2RmibForwardedSetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each consists of Forwarded Tuples:
(F_type, F_orig_addr, F_seq_number, F_time)"
REFERENCE
"The OLSRv2 draft."
INDEX { olsrv2RmibReceivedSetOrigIpAddr,
olsrv2RmibReceivedSetSeqNo }
::= { olsrv2RmibForwardedSetTable 1 }
Olsrv2RmibForwardedSetEntry ::=
SEQUENCE {
olsrv2RmibForwardedSetMsgType
Unsigned32,
olsrv2RmibForwardedSetOrigIpAddrType
InetAddressType,
olsrv2RmibForwardedSetOrigIpAddr
InetAddress,
olsrv2RmibForwardedSetSeqNo
Unsigned32,
olsrv2RmibForwardedSetExpireTime
TimeStamp
}
olsrv2RmibForwardedSetMsgType OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the forwarded Message Type."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibForwardedSetEntry 1 }
olsrv2RmibForwardedSetOrigIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2RmibForwardedSetOrigIpAddr,
as defined in the InetAddress MIB [RFC 4001]."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibForwardedSetEntry 2 }
olsrv2RmibForwardedSetOrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the originator address of the forwarded
message, note that this does not include a
prefix length."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibForwardedSetEntry 3 }
olsrv2RmibForwardedSetSeqNo OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the message sequence number of the forwarded
message."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibForwardedSetEntry 4 }
olsrv2RmibForwardedSetExpireTime OBJECT-TYPE
SYNTAX TimeStamp
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the time at which this Tuple
expires and MUST be removed."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2RmibForwardedSetEntry 5 }
--
-- OLSRv2 Performance Group
--
-- Contains objects which help to characterize the
-- performance of the OLSRv2 routing process.
--
olsrv2PerformanceObjGrp OBJECT IDENTIFIER ::= { olsrv2MIBObjects 3 }
--
-- Objects per local interface
--
olsrv2InterfacePerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Olsrv2InterfacePerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table summarizes performance objects that are
measured per local OLSRv2 interface."
REFERENCE
"The OLSRv2 draft."
::= { olsrv2PerformanceObjGrp 1 }
olsrv2InterfacePerfEntry OBJECT-TYPE
SYNTAX Olsrv2InterfacePerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A single entry contains performance counters for
a local OLSRv2 interface."
INDEX { olsrv2IfPerfIndex }
::= { olsrv2InterfacePerfTable 1 }
Olsrv2InterfacePerfEntry ::=
SEQUENCE {
olsrv2IfPerfIndex
InterfaceIndexOrZero,
olsrv2IfTcMessageXmits
Counter32,
olsrv2IfTcMessageRecvd
Counter32,
olsrv2IfTcMessageXmitAccumulatedSize
Counter32,
olsrv2IfTcMessageRecvdAccumulatedSize
Counter32,
olsrv2IfTcMessageTriggeredXmits
Counter32,
olsrv2IfTcMessagePeriodicXmits
Counter32,
olsrv2IfTcMessageForwardedXmits
Counter32,
olsrv2IfTcMessageXmitAccumulatedMPRSelectorCount
Counter32
}
olsrv2IfPerfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of an interface. Used for cross
indexing into other OLSRv2 tables and other
MIBs."
::= { olsrv2InterfacePerfEntry 1 }
olsrv2IfTcMessageXmits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter is incremented each time a TC
message has been transmitted on that interface."
::= { olsrv2InterfacePerfEntry 2 }
olsrv2IfTcMessageRecvd OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter is incremented each time a
TC message has been received on that interface."
::= { olsrv2InterfacePerfEntry 3 }
olsrv2IfTcMessageXmitAccumulatedSize OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter is incremented by the number of octets in
a TC message each time a
TC message has been sent."
::= { olsrv2InterfacePerfEntry 4 }
olsrv2IfTcMessageRecvdAccumulatedSize OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter is incremented by the number of octets in
a TC message each time a
TC message has been received."
::= { olsrv2InterfacePerfEntry 5 }
olsrv2IfTcMessageTriggeredXmits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter is incremented each time a triggered
TC message has been sent."
::= { olsrv2InterfacePerfEntry 6 }
olsrv2IfTcMessagePeriodicXmits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter is incremented each time a periodic
TC message has been sent."
::= { olsrv2InterfacePerfEntry 7 }
olsrv2IfTcMessageForwardedXmits OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter is incremented each time a
TC message has been forwarded."
::= { olsrv2InterfacePerfEntry 8 }
olsrv2IfTcMessageXmitAccumulatedMPRSelectorCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A counter is incremented by the number of advertised
MPR selectors in a TC each time a TC
message has been sent."
::= { olsrv2InterfacePerfEntry 9 }
--
-- Objects concerning the Routing set
--
olsrv2RoutingSetRecalculationCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter increments each time the Routing Set has
been recalculated."
::= { olsrv2PerformanceObjGrp 2 }
--
-- Objects concerning the MPR set
--
olsrv2MPRSetRecalculationCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter increments each time the MPRs
of this router have been recalculated."
::= { olsrv2PerformanceObjGrp 3 }
--
-- Notifications
--
olsrv2NotificationsControl OBJECT IDENTIFIER ::=
{ olsrv2MIBNotifications 1 }
olsrv2NotificationsObjects OBJECT IDENTIFIER ::=
{ olsrv2MIBNotifications 2 }
olsrv2NotificationsStates OBJECT IDENTIFIER ::=
{ olsrv2MIBNotifications 3 }
-- olsrv2NotificationsControl
olsrv2SetNotification OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A 4-octet string serving as a bit map for
the notification events defined by the OLSRv2
notifications. This object is used to enable
and disable specific OLSRv2 notifications where
a 1 in the bit field represents enabled. The
right-most bit (least significant) represents
notification 1.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage.
"
::= { olsrv2NotificationsControl 1 }
olsrv2RoutingSetRecalculationCountThreshold OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold value for the
olsrv2RoutingSetRecalculationCount object.
If the number of occurrences exceeds this
threshold within the previous
olsrv2RoutingSetReculculationCountWindow,
then the olsrv2RoutingSetRecalculationCountChange
notification is to be sent.
"
::= { olsrv2NotificationsControl 2 }
olsrv2RoutingSetRecalculationCountWindow OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A time window for the
olsrv2RoutingSetRecalculationCount object.
If the number of occurrences exceeds the
olsrv2RoutingSetRecalculationCountThreshold
within the previous
olsrv2RoutingSetRecalculationCountWindow,
then the
olsrv2RoutingSetRecalculationCountChange
notification is to be sent.
This object represents the time in hundredths
of a second.
"
::= { olsrv2NotificationsControl 3 }
olsrv2MPRSetRecalculationCountThreshold OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A threshold value for the
olsrv2MPRSetRecalculationCount object.
If the number of occurrences exceeds this
threshold within the previous
olsrv2MPRSetReculculationCountWindow,
then the
olsrv2MPRSetRecalculationCountChange
notification is to be sent.
"
::= { olsrv2NotificationsControl 4 }
olsrv2MPRSetRecalculationCountWindow OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A time window for the
olsrv2MPRSetRecalculationCount object.
If the number of occurrences exceeds the
olsrv2MPRSetRecalculationCountThreshold
within the previous
olsrv2MPRSetRecalculationCountWindow,
then the
olsrv2MPRSetRecalculationCountChange
notification is to be sent.
This object represents the time in hundredths
of a second.
"
::= { olsrv2NotificationsControl 5 }
-- olsrv2NotificationsObjects
olsrv2RouterStatusChange NOTIFICATION-TYPE
OBJECTS { olsrv2OrigIpAddrType, -- The address type of
-- the originator of
-- the notification.
olsrv2OrigIpAddr, -- The originator of
-- the notification.
olsrv2RouterStatus -- The new state.
}
STATUS current
DESCRIPTION
"olsrv2RouterStatusChange is a notification sent
when a the OLSRv2 router changes it status.
The router status is maintained in the
olsrv2RouterStatus object.
"
::= { olsrv2NotificationsObjects 1 }
olsrv2OrigIpAddrChange NOTIFICATION-TYPE
OBJECTS { olsrv2OrigIpAddrType, -- The address type of
-- the originator of
-- the notification.
olsrv2OrigIpAddr, -- The originator of
-- the notification.
olsrv2PreviousOrigIpAddrType, -- The address
-- type of previous
-- address of
-- the originator of
-- the notification.
olsrv2PreviousOrigIpAddr -- The previous
-- address of the
-- originator of
-- the notification.
}
STATUS current
DESCRIPTION
"olsrv2RouterStatusChange is a notification sent when a
the OLSRv2 router changes it status. The router
status is maintained in the olsrv2RouterStatus
object.
"
::= { olsrv2NotificationsObjects 2 }
olsrv2RoutingSetRecalculationCountChange NOTIFICATION-TYPE
OBJECTS { olsrv2OrigIpAddrType, -- The address type of
-- the originator of
-- the notification.
olsrv2OrigIpAddr, -- The originator of
-- the notification.
olsrv2RoutingSetRecalculationCount -- The
-- new count of the
-- routing set
-- recalculations.
}
STATUS current
DESCRIPTION
"olsrv2RoutingSetRecalculationCountChange is
a notification sent when a significant number of
routing set recalculations have occurred.
The network administrator should select
appropriate values for 'significant number of
neighbors' and 'short time' through the settings
of the olsrv2RoutingSetRecalculationCountThreshold
and olsrv2RoutingSetRecalculationCountWindow
objects.
"
::= { olsrv2NotificationsObjects 3 }
olsrv2MPRSetRecalculationCountChange NOTIFICATION-TYPE
OBJECTS { olsrv2OrigIpAddrType, -- The address type of
-- the originator of
-- the notification.
olsrv2OrigIpAddr, -- The originator of
-- the notification.
olsrv2MPRSetRecalculationCount -- The new
-- MPR set
-- recalculation
-- count.
}
STATUS current
DESCRIPTION
"olsrv2MPRSetRecalculationCountChange is
a notification sent when a significant number of
MPR set recalculations have occurred.
The network administrator should select
appropriate values for 'significant number of
neighbors' and 'short time' through the settings
of the olsrv2MPRSetRecalculationCountThreshold
and olsrv2MPRSetRecalculationCountWindow
objects.
"
::= { olsrv2NotificationsObjects 4 }
-- olsrv2NotificationStates
olsrv2PreviousOrigIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the olsrv2PreviousOrigIpAddr,
as defined in the InetAddress MIB [RFC 4001].
This objected should be updated each time the
olsrv2OrigIpAddrType is changed.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage.
"
REFERENCE
"The OLSRv2 draft."
::= { olsrv2NotificationsStates 1 }
olsrv2PreviousOrigIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The previous origination IP address
of this OLSRv2 router.
This object should be updated each time
the olsrv2OrigIpAddr is modified.
This object is persistent and when written
the entity SHOULD save the change to
non-volatile storage.
"
REFERENCE
"The OLSRv2 draft."
::= { olsrv2NotificationsStates 2 }
--
-- Compliance Statements
--
olsrv2Compliances OBJECT IDENTIFIER ::= { olsrv2MIBConformance 1 }
olsrv2MIBGroups OBJECT IDENTIFIER ::= { olsrv2MIBConformance 2 }
olsrv2BasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The basic implementation requirements for
managed network entities that implement
the OLSRv2 routing process."
MODULE -- this module
MANDATORY-GROUPS { olsrv2ConfigObjectsGroup }
::= { olsrv2Compliances 1 }
olsrv2FullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The full implementation requirements for
managed network entities that implement
the OLSRv2 routing process."
MODULE -- this module
MANDATORY-GROUPS { olsrv2ConfigObjectsGroup,
olsrv2StateObjectsGroup,
olsrv2PerfObjectsGroup,
olsrv2NotificationsObjectsGroup,
olsrv2NotificationsGroup }
::= { olsrv2Compliances 2 }
--
-- Units of Conformance
--
olsrv2ConfigObjectsGroup OBJECT-GROUP
OBJECTS {
olsrv2OrigIpAddrType,
olsrv2OrigIpAddr,
olsrv2OHoldTime,
olsrv2TcInterval,
olsrv2TcMinInterval,
olsrv2THoldTime,
olsrv2AHoldTime,
olsrv2RxHoldTime,
olsrv2PHoldTime,
olsrv2FHoldTime,
olsrv2TpMaxJitter,
olsrv2TtMaxJitter,
olsrv2FMaxJitter,
olsrv2TcHopLimit,
olsrv2Willingness
}
STATUS current
DESCRIPTION
"Set of OLSRv2 configuration objects implemented
in this module."
::= { olsrv2MIBGroups 1 }
olsrv2StateObjectsGroup OBJECT-GROUP
OBJECTS {
olsrv2RouterStatus,
olsrv2LibOrigSetIpAddrType,
olsrv2LibOrigSetIpAddr,
olsrv2LibLocAttNetSetIpAddrType,
olsrv2LibLocAttNetSetIpAddr,
olsrv2LibLocAttNetSetIpAddrPrefixLen,
olsrv2LibLocAttNetSetDistance,
olsrv2LibLocAttNetSetRowStatus,
olsrv2NibNeighborSetNIpAddrType,
olsrv2NibNeighborSetNOrigAddr,
olsrv2NibNeighborSetNWilliness,
olsrv2NibNeighborSetNMpr,
olsrv2NibNeighborSetNMprSelector,
olsrv2NibNeighborSetNAdvertised,
olsrv2NibNeighborSetTableAnsn,
olsrv2TibAdRemoteRouterSetIpAddrType,
olsrv2TibAdRemoteRouterSetIpAddr,
olsrv2TibAdRemoteRouterSetMaxSeqNo,
olsrv2TibRouterTopologySetFromOrigIpAddrType,
olsrv2TibRouterTopologySetFromOrigIpAddr,
olsrv2TibRouterTopologySetToOrigIpAddrType,
olsrv2TibRouterTopologySetToOrigIpAddr,
olsrv2TibRouterTopologySetSeqNo,
olsrv2TibRoutableAddressTopologySetExpireTime,
olsrv2TibRoutableAddressTopologySetFromOrigIpAddrType,
olsrv2TibRoutableAddressTopologySetFromOrigIpAddr,
olsrv2TibRoutableAddressTopologySetToOrigIpAddrType,
olsrv2TibRoutableAddressTopologySetToOrigIpAddr,
olsrv2TibRoutableAddressTopologySetSeqNo,
olsrv2TibAttNetworksSetOrigIpAddr,
olsrv2TibAttNetworksSetNetIpAddr,
olsrv2TibAttNetworksSetNetIpAddrPrefixLen,
olsrv2TibAttNetworksSetSeqNo,
olsrv2TibAttNetworksSetDist,
olsrv2TibAttNetworksSetExpireTime,
olsrv2TibRoutingSetDestIpAddr,
olsrv2TibRoutingSetDestIpAddrPrefLen,
olsrv2TibRoutingSetNextIfIpAddr,
olsrv2TibRoutingSetLocalIfIpAddr,
olsrv2TibRoutingSetDist,
olsrv2RmibReceivedSetMsgType,
olsrv2RmibReceivedSetOrigIpAddrType,
olsrv2RmibReceivedSetOrigIpAddr,
olsrv2RmibReceivedSetSeqNo,
olsrv2RmibReceivedSetExpireTime,
olsrv2RmibProcessedSetMsgType,
olsrv2RmibProcessedSetOrigIpAddrType,
olsrv2RmibProcessedSetOrigIpAddr,
olsrv2RmibProcessedSetSeqNo,
olsrv2RmibProcessedSetExpireTime,
olsrv2RmibForwardedSetMsgType,
olsrv2RmibForwardedSetOrigIpAddrType,
olsrv2RmibForwardedSetOrigIpAddr,
olsrv2RmibForwardedSetSeqNo,
olsrv2RmibForwardedSetExpireTime
}
STATUS current
DESCRIPTION
"Set of OLSRv2 state objects implemented
in this module."
::= { olsrv2MIBGroups 2 }
olsrv2PerfObjectsGroup OBJECT-GROUP
OBJECTS {
olsrv2IfTcMessageXmits,
olsrv2IfTcMessageRecvd,
olsrv2IfTcMessageXmitAccumulatedSize,
olsrv2IfTcMessageRecvdAccumulatedSize,
olsrv2IfTcMessageTriggeredXmits,
olsrv2IfTcMessagePeriodicXmits,
olsrv2IfTcMessageForwardedXmits,
olsrv2IfTcMessageXmitAccumulatedMPRSelectorCount,
olsrv2RoutingSetRecalculationCount,
olsrv2MPRSetRecalculationCount
}
STATUS current
DESCRIPTION
"Set of OLSRv2 performance objects implemented
in this module by total and per interface."
::= { olsrv2MIBGroups 3 }
olsrv2NotificationsObjectsGroup OBJECT-GROUP
OBJECTS {
olsrv2SetNotification,
olsrv2RoutingSetRecalculationCountThreshold,
olsrv2RoutingSetRecalculationCountWindow,
olsrv2MPRSetRecalculationCountThreshold,
olsrv2MPRSetRecalculationCountWindow,
olsrv2PreviousOrigIpAddrType,
olsrv2PreviousOrigIpAddr
}
STATUS current
DESCRIPTION
"Set of OLSRv2 notification objects implemented
in this module."
::= { olsrv2MIBGroups 4 }
olsrv2NotificationsGroup OBJECT-GROUP
OBJECTS {
olsrv2RouterStatusChange,
olsrv2OrigIpAddrChange,
olsrv2RoutingSetRecalculationCountChange,
olsrv2MPRSetRecalculationCountChange
}
STATUS current
DESCRIPTION
"Set of OLSRv2 notifications implemented
in this module."
::= { olsrv2MIBGroups 5 }
END
| TOC |
This MIB defines objects for the configuration, monitoring and notification of the Optimized Link State Routing protocol version 2 [OLSRv2] (Clausen, T., Dearlove, C., and P. Jacquet, “The Optimized Link State Routing Protocol version 2,” April 2010.). OLSRv2 allows routers to acquire topological information of the routing domain by virtue of exchanging TC message, to calculate shortest paths to each destination router in the routing domain, to select relays for network-wide transmissions etc.
There are a number of management objects defined in this MIB module with a MAX-ACCESS clause of read-write and/or read-create. Such objects may be considered sensitive or vulnerable in some network environments. The support for SET operations in a non-secure environment without proper protection can have a negative effect on network operations. These are the tables and objects and their sensitivity/vulnerability:
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. These are the tables and objects and their sensitivity/vulnerability:
MANET technology is often deployed to support communications of emergency services or military tactical applications. In these applications, it is imperative to maintain the proper operation of the communications network and to protect sensitive information related to its operation. Therefore, when implementing these capabilities, the full use of SNMPv3 cryptographic mechanisms for authentication and privacy is RECOMMENDED.
SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPSec), there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.
It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410] (Case, J., Mundy, R., Partain, D., and B. Stewart, “Introduction and Applicability Statements for Internet-Standard Management Framework,” December 2002.), Section 8, including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.
| TOC |
This memo does not include any request to IANA.
| TOC |
| TOC |
| [RFC2863] | McCloghrie, K. and F. Kastenholz, “The Interfaces Group MIB,” RFC 2863, June 2000 (TXT). |
| [RFC3418] | Presuhn, R., “Management Information Base (MIB) for the Simple Network Management Protocol (SNMP),” STD 62, RFC 3418, December 2002 (TXT). |
| [RFC2119] | Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML). |
| [RFC2578] | McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., “Structure of Management Information Version 2 (SMIv2),” STD 58, RFC 2578, April 1999 (TXT). |
| [RFC2579] | McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., “Textual Conventions for SMIv2,” STD 58, RFC 2579, April 1999 (TXT). |
| [RFC2580] | McCloghrie, K., Perkins, D., and J. Schoenwaelder, “Conformance Statements for SMIv2,” STD 58, RFC 2580, April 1999 (TXT). |
| [OLSRv2] | Clausen, T., Dearlove, C., and P. Jacquet, “The Optimized Link State Routing Protocol version 2,” draft-ietf-manet-olsr-11 (work in progress), April 2010 (TXT). |
| [NHDP] | Clausen, T., Dearlove, C., and J. Dean, “Mobile Ad Hoc Network (MANET) Neighborhood Discovery Protocol (NHDP),” draft-ietf-manet-nhdp-13 (work in progress), July 2010 (TXT). |
| [NHDP-MIB] | Herberg, U., Cole, R., and I. Chakeres, “Definition of Managed Objects for the Neighborhood Discovery Protocol,” draft-ietf-manet-nhdp-mib-04 (work in progress), July 2010 (TXT). |
| [RFC4001] | Daniele, M., Haberman, B., Routhier, S., and J. Schoenwaelder, “Textual Conventions for Internet Network Addresses,” RFC 4001, February 2005 (TXT). |
| [RFC3781] | Strauss, F. and J. Schoenwaelder, “Next Generation Structure of Management Information (SMIng) Mappings to the Simple Network Management Protocol (SNMP),” RFC 3781, May 2004 (TXT). |
| TOC |
| [RFC3410] | Case, J., Mundy, R., Partain, D., and B. Stewart, “Introduction and Applicability Statements for Internet-Standard Management Framework,” RFC 3410, December 2002 (TXT). |
| [REPORT] | Cole, R., Macker, J., and A. Morton, “Definition of Managed Objects for Performance Reporting,” draft-ietf-manet-report-mib-00 (work in progress), July 2010 (TXT). |
| TOC |
This section identifies the changes made during the development of this MIB.
Here we list the changes made in developing draft-ietf-manet-olsrv2-mib-03.
Here we list the changes made in developing draft-ietf-manet-olsrv2-mib-02.
Here we list the changes made in developing draft-ietf-manet-olsrv2-mib-01.
Here we list the changes made in developing draft-ietf-manet-olsrv2-mib-00.
Here we list the changes made in developing draft-cole-manet-olsr-mib-01.
| TOC |
This section contains the set of open issues related to the development and design of the OLSRv2-MIB. This section will not be present in the final version of the MIB and will be removed once all the open issues have been resolved.
| TOC |
*************************************************************** * Note to the RFC Editor (to be removed prior to publication) * * * * 1) The reference to RFCXXXX within the DESCRIPTION clauses * * of the MIB module point to this draft and are to be * * assigned by the RFC Editor. * * * * 2) The reference to RFCXXX2 throughout this document point * * to the current draft-ietf-manet-olsrv2-xx.txt. This * * need to be replaced with the XXX RFC number. * * * ***************************************************************
| TOC |
| Ulrich Herberg | |
| LIX, Ecole Polytechnique | |
| Palaiseau Cedex, 91128 | |
| France | |
| EMail: | ulrich@herberg.name |
| URI: | http://www.herberg.name/ |
| Robert G. Cole | |
| US Army CERDEC | |
| 328 Hopkins Road, Bldg 245 | |
| Aberdeen Proving Ground, Maryland 21005 | |
| USA | |
| Phone: | +1 410 278 6779 |
| EMail: | robert.g.cole@us.army.mil |
| URI: | http://www.cs.jhu.edu/~rgcole/ |
| Thomas Heide Clausen | |
| LIX, Ecole Polytechnique | |
| Palaiseau Cedex, 91128 | |
| France | |
| Phone: | +33 6 6058 9349 |
| EMail: | T.Clausen@computer.org |
| URI: | http://www.ThomasClausen.org/ |