| NETCONF Working Group | K. Watsen |
| Internet-Draft | Juniper Networks |
| Intended status: Standards Track | J. Schoenwaelder |
| Expires: September 14, 2017 | Jacobs University Bremen |
| March 13, 2017 |
RESTCONF Client and Server Models
draft-ietf-netconf-restconf-client-server-02
This document defines two YANG modules, one module to configure a RESTCONF client and the other module to configure a RESTCONF server. Both modules support the TLS transport protocol with both standard RESTCONF and RESTCONF Call Home connections.
This draft contains many placeholder values that need to be replaced with finalized values at the time of publication. This note summarizes all of the substitutions that are needed. No other RFC Editor instructions are specified elsewhere in this document.
This document contains references to other drafts in progress, both in the Normative References section, as well as in body text throughout. Please update the following references to reflect their final RFC assignments:
Artwork in this document contains shorthand references to drafts in progress. Please apply the following replacements:
Artwork in this document contains placeholder values for the date of publication of this draft. Please apply the following replacement:
The following two Appendix sections are to be removed prior to publication:
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on September 14, 2017.
Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
This document defines two YANG [RFC7950] modules, one module to configure a RESTCONF client and the other module to configure a RESTCONF server [RFC8040]. Both modules support the TLS [RFC5246] transport protocol with both standard RESTCONF and RESTCONF Call Home connections [RFC8071].
The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].
A simplified graphical representation of the data models is used in this document. The meaning of the symbols in these diagrams is as follows:
EDITOR NOTE: Please ignore this section, it is incomplete.
The RESTCONF client model presented in this section supports both clients initiating connections to servers, as well as clients listening for connections from servers calling home.
This model supports the TLS transport protocol using the TLS client groupings defined in [I-D.ietf-netconf-tls-client-server].
All private keys and trusted certificates are held in the keystore model defined in [I-D.ietf-netconf-keystore].
YANG feature statements are used to enable implementations to advertise which parts of the model the RESTCONF client supports.
Note: all lines are folded at column 71 with no '\' character.
module: ietf-restconf-client
+--rw restconf-client
+--rw initiate {initiate}?
| +--rw restconf-server* [name]
| +--rw name string
| +--rw (transport)
| | +--:(tls) {tls-initiate}?
| | +--rw tls
| | +--rw endpoints
| | | +--rw endpoint* [name]
| | | +--rw name string
| | | +--rw address inet:host
| | | +--rw port? inet:port-number
| | +--rw server-auth
| | | +--rw trusted-ca-certs? leafref
| | | +--rw trusted-server-certs? leafref
| | +--rw client-auth
| | | +--rw (auth-type)?
| | | +--:(certificate)
| | | +--rw certificate? leafref
| | +--rw hello-params
| | {tls-client-hello-params-config}?
| | +--rw tls-versions
| | | +--rw tls-version* identityref
| | +--rw cipher-suites
| | +--rw cipher-suite* identityref
| +--rw connection-type
| | +--rw (connection-type)?
| | +--:(persistent-connection)
| | | +--rw persistent!
| | | +--rw idle-timeout? uint32
| | | +--rw keep-alives
| | | +--rw max-wait? uint16
| | | +--rw max-attempts? uint8
| | +--:(periodic-connection)
| | +--rw periodic!
| | +--rw idle-timeout? uint16
| | +--rw reconnect-timeout? uint16
| +--rw reconnect-strategy
| +--rw start-with? enumeration
| +--rw max-attempts? uint8
+--rw listen {listen}?
+--rw max-sessions? uint16
+--rw idle-timeout? uint16
+--rw endpoint* [name]
+--rw name string
+--rw (transport)
+--:(tls) {tls-listen}?
+--rw tls
+--rw address? inet:ip-address
+--rw port? inet:port-number
+--rw server-auth
| +--rw trusted-ca-certs? leafref
| +--rw trusted-server-certs? leafref
+--rw client-auth
| +--rw (auth-type)?
| +--:(certificate)
| +--rw certificate? leafref
+--rw hello-params
{tls-client-hello-params-config}?
+--rw tls-versions
| +--rw tls-version* identityref
+--rw cipher-suites
+--rw cipher-suite* identityref
The following example illustrates configuring a RESTCONF client to initiate connections, as well as listening for call-home connections.
This example is consistent with the examples presented in Section 2.2 of [I-D.ietf-netconf-keystore].
<restconf-client
xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf-client">
<!-- RESTCONF servers to initiate connections to -->
<initiate>
<restconf-server>
<name>corp-fw1</name>
<tls>
<endpoints>
<endpoint>
<name>corp-fw1.example.com</name>
<address>corp-fw1.example.com</address>
</endpoint>
<endpoint>
<name>corp-fw2.example.com</name>
<address>corp-fw2.example.com</address>
</endpoint>
</endpoints>
<server-auth>
<trusted-server-certs>deployment-specific-ca-certs</trusted-server-certs>
</server-auth>
<client-auth>
<certificate>tls-ec-cert</certificate>
</client-auth>
</tls>
</restconf-server>
</initiate>
<!-- endpoints to listen for RESTCONF Call Home connections on -->
<listen>
<endpoint>
<name>Intranet-facing listener</name>
<tls>
<address>11.22.33.44</address>
<server-auth>
<trusted-ca-certs>deployment-specific-ca-certs</trusted-ca-certs>
<trusted-server-certs>explicitly-trusted-server-certs</trusted-server-certs>
</server-auth>
<client-auth>
<certificate>tls-ec-cert</certificate>
</client-auth>
</tls>
</endpoint>
</listen>
</restconf-client>
This YANG module imports YANG types from [RFC6991] and [RFC7407].
<CODE BEGINS> file "ietf-restconf-client@2017-03-13.yang"
module ietf-restconf-client {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-restconf-client";
prefix "rcc";
import ietf-inet-types {
prefix inet;
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-tls-client {
prefix ts;
revision-date 2017-03-13; // stable grouping definitions
reference
"RFC ZZZZ: TLS Client and Server Models";
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web: <http://tools.ietf.org/wg/restconf/>
WG List: <mailto:restconf@ietf.org>
Author: Kent Watsen
<mailto:kwatsen@juniper.net>
Author: Gary Wu
<mailto:garywu@cisco.com>";
description
"This module contains a collection of YANG definitions for
configuring RESTCONF clients.
Copyright (c) 2014 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision "2017-03-13" {
description
"Initial version";
reference
"RFC XXXX: RESTCONF Client and Server Models";
}
// Features
feature initiate {
description
"The 'initiate' feature indicates that the RESTCONF client
supports initiating RESTCONF connections to RESTCONF servers
using at least one transport (e.g., TLS, etc.).";
}
feature tls-initiate {
description
"The ‘tls-initiate’ feature indicates that the RESTCONF client
supports initiating TLS connections to RESTCONF servers.";
reference
"RFC 8040: RESTCONF Protocol";
}
feature listen {
description
"The 'listen' feature indicates that the RESTCONF client
supports opening a port to accept RESTCONF server call
home connections using at least one transport (e.g.,
TLS, etc.).";
}
feature tls-listen {
description
"The ‘tls-listen’ feature indicates that the RESTCONF client
supports opening a port to listen for incoming RESTCONF
server call-home TLS connections.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
container restconf-client {
description
"Top-level container for RESTCONF client configuration.";
container initiate {
if-feature initiate;
description
"Configures client initiating underlying TCP connections.";
list restconf-server {
key name;
description
"List of RESTCONF servers the RESTCONF client is to initiate
connections to.";
leaf name {
type string;
description
"An arbitrary name for the RESTCONF server.";
}
choice transport {
mandatory true;
description
"Selects between available transports.";
case tls {
if-feature tls-initiate;
container tls {
description
"Specifies TLS-specific transport configuration.";
uses endpoints-container {
refine endpoints/endpoint/port {
default 443;
}
}
uses ts:tls-client-grouping;
}
} // end tls
} // end transport
container connection-type {
description
"Indicates the kind of connection to use.";
choice connection-type {
description
"Selects between available connection types.";
case persistent-connection {
container persistent {
presence true;
description
"Maintain a persistent connection to the RESTCONF
server. If the connection goes down, immediately
start trying to reconnect to it, using the
reconnection strategy.
This connection type minimizes any RESTCONF server
to RESTCONF client data-transfer delay, albeit at
the expense of holding resources longer.";
leaf idle-timeout {
type uint32;
units "seconds";
default 86400; // one day;
description
"Specifies the maximum number of seconds that a
a RESTCONF session may remain idle. A RESTCONF
session will be dropped if it is idle for an
interval longer than this number of seconds.
If set to zero, then the client will never drop
a session because it is idle. Sessions that
have a notification subscription active are
never dropped.";
}
container keep-alives {
description
"Configures the keep-alive policy, to proactively
test the aliveness of the SSH/TLS server. An
unresponsive SSH/TLS server will be dropped after
approximately max-attempts * max-wait seconds.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call
Home, Section 3.1, item S6";
leaf max-wait {
type uint16 {
range "1..max";
}
units seconds;
default 30;
description
"Sets the amount of time in seconds after which
if no data has been received from the SSH/TLS
server, a SSH/TLS-level message will be sent
to test the aliveness of the SSH/TLS server.";
}
leaf max-attempts {
type uint8;
default 3;
description
"Sets the maximum number of sequential keep-alive
messages that can fail to obtain a response from
the SSH/TLS server before assuming the SSH/TLS
server is no longer alive.";
}
}
}
}
case periodic-connection {
container periodic {
presence true;
description
"Periodically connect to the RESTCONF server, so that
the RESTCONF server may deliver messages pending for
the RESTCONF client. The RESTCONF server must close
the connection when it is ready to release it. Once
the connection has been closed, the RESTCONF client
will restart its timer until the next connection.";
leaf idle-timeout {
type uint16;
units "seconds";
default 300; // five minutes
description
"Specifies the maximum number of seconds that a
a RESTCONF session may remain idle. A RESTCONF
session will be dropped if it is idle for an
interval longer than this number of seconds.
If set to zero, then the server will never drop
a session because it is idle. Sessions that
have a notification subscription active are
never dropped.";
}
leaf reconnect-timeout {
type uint16 {
range "1..max";
}
units minutes;
default 60;
description
"Sets the maximum amount of unconnected time the
RESTCONF client will wait before re-establishing
a connection to the RESTCONF server. The RESTCONF
client may initiate a connection before this
time if desired (e.g., to set configuration).";
}
}
}
}
}
container reconnect-strategy {
description
"The reconnection strategy directs how a RESTCONF client
reconnects to a RESTCONF server, after discovering its
connection to the server has dropped, even if due to a
reboot. The RESTCONF client starts with the specified
endpoint and tries to connect to it max-attempts times
before trying the next endpoint in the list (round
robin).";
leaf start-with {
type enumeration {
enum first-listed {
description
"Indicates that reconnections should start with
the first endpoint listed.";
}
enum last-connected {
description
"Indicates that reconnections should start with
the endpoint last connected to. If no previous
connection has ever been established, then the
first endpoint configured is used. RESTCONF
clients SHOULD be able to remember the last
endpoint connected to across reboots.";
}
}
default first-listed;
description
"Specifies which of the RESTCONF server's endpoints the
RESTCONF client should start with when trying to connect
to the RESTCONF server.";
}
leaf max-attempts {
type uint8 {
range "1..max";
}
default 3;
description
"Specifies the number times the RESTCONF client tries to
connect to a specific endpoint before moving on to the
next endpoint in the list (round robin).";
}
}
} // end restconf-server
} // end initiate
container listen {
if-feature listen;
description
"Configures client accepting call-home TCP connections.";
leaf max-sessions {
type uint16;
default 0;
description
"Specifies the maximum number of concurrent sessions
that can be active at one time. The value 0 indicates
that no artificial session limit should be used.";
}
leaf idle-timeout {
type uint16;
units "seconds";
default 3600; // one hour
description
"Specifies the maximum number of seconds that a RESTCONF
session may remain idle. A RESTCONF session will be dropped
if it is idle for an interval longer than this number of
seconds. If set to zero, then the server will never drop
a session because it is idle. Sessions that have a
notification subscription active are never dropped.";
}
list endpoint {
key name;
description
"List of endpoints to listen for RESTCONF connections.";
leaf name {
type string;
description
"An arbitrary name for the RESTCONF listen endpoint.";
}
choice transport {
mandatory true;
description
"Selects between available transports.";
case tls {
if-feature tls-listen;
container tls {
description
"TLS-specific listening configuration for inbound
connections.";
leaf address {
type inet:ip-address;
description
"The IP address to listen for call-home connections.";
}
leaf port {
type inet:port-number;
default 4336;
description
"The port number to listen for call-home connections.";
}
uses ts:tls-client-grouping;
}
}
} // end transport
} // end endpoint
} // end listen
} // end restconf-client
grouping endpoints-container {
description
"This grouping is used to configure a set of RESTCONF servers
a RESTCONF client may initiate connections to.";
container endpoints {
description
"Container for the list of endpoints.";
list endpoint {
key name;
unique "address port";
min-elements 1;
ordered-by user;
description
"A non-empty user-ordered list of endpoints for this RESTCONF
client to try to connect to. Defining more than one enables
high-availability.";
leaf name {
type string;
description
"An arbitrary name for this endpoint.";
}
leaf address {
type inet:host;
mandatory true;
description
"The IP address or hostname of the endpoint. If a
hostname is configured and the DNS resolution results
in more than one IP address, the RESTCONF client
will process the IP addresses as if they had been
explicitly configured in place of the hostname.";
}
leaf port {
type inet:port-number;
description
"The IP port for this endpoint. The RESTCONF client will
use the IANA-assigned well-known port (set via a refine
statement when uses) if no value is specified.";
}
}
}
}
}
<CODE ENDS>
The RESTCONF Server model presented in this section supports servers both listening for connections as well as initiating call-home connections.
This model supports the TLS transport protocol using the TLS server groupings defined in [I-D.ietf-netconf-tls-client-server].
All private keys and trusted certificates are held in the keystore model defined in [I-D.ietf-netconf-keystore].
YANG feature statements are used to enable implementations to advertise which parts of the model the RESTCONF server supports.
Note: all lines are folded at column 71 with no '\' character.
module: ietf-restconf-server
+--rw restconf-server
+--rw listen {listen}?
| +--rw max-sessions? uint16
| +--rw endpoint* [name]
| +--rw name string
| +--rw (transport)
| +--:(tls) {tls-listen}?
| +--rw tls
| +--rw address? inet:ip-address
| +--rw port? inet:port-number
| +--rw certificates
| | +--rw certificate* [name]
| | +--rw name leafref
| +--rw client-auth
| | +--rw trusted-ca-certs? leafref
| | +--rw trusted-client-certs? leafref
| | +--rw cert-maps
| | +--rw cert-to-name* [id]
| | +--rw id uint32
| | +--rw fingerprint x509c2n:tls-fingerprint
| | +--rw map-type identityref
| | +--rw name string
| +--rw hello-params
| {tls-server-hello-params-config}?
| +--rw tls-versions
| | +--rw tls-version* identityref
| +--rw cipher-suites
| +--rw cipher-suite* identityref
+--rw call-home {call-home}?
+--rw restconf-client* [name]
+--rw name string
+--rw (transport)
| +--:(tls) {tls-call-home}?
| +--rw tls
| +--rw endpoints
| | +--rw endpoint* [name]
| | +--rw name string
| | +--rw address inet:host
| | +--rw port? inet:port-number
| +--rw certificates
| | +--rw certificate* [name]
| | +--rw name leafref
| +--rw client-auth
| | +--rw trusted-ca-certs? leafref
| | +--rw trusted-client-certs? leafref
| | +--rw cert-maps
| | +--rw cert-to-name* [id]
| | +--rw id uint32
| | +--rw fingerprint x509c2n:tls-fingerprint
| | +--rw map-type identityref
| | +--rw name string
| +--rw hello-params
| {tls-server-hello-params-config}?
| +--rw tls-versions
| | +--rw tls-version* identityref
| +--rw cipher-suites
| +--rw cipher-suite* identityref
+--rw connection-type
| +--rw (connection-type)?
| +--:(persistent-connection)
| | +--rw persistent!
| | +--rw keep-alives
| | +--rw max-wait? uint16
| | +--rw max-attempts? uint8
| +--:(periodic-connection)
| +--rw periodic!
| +--rw reconnect-timeout? uint16
+--rw reconnect-strategy
+--rw start-with? enumeration
+--rw max-attempts? uint8
The following example illustrates configuring a RESTCONF server to listen for RESTCONF client connections, as well as configuring call-home to one RESTCONF client.
This example is consistent with the examples presented in Section 2.2 of [I-D.ietf-netconf-keystore].
<restconf-server
xmlns="urn:ietf:params:xml:ns:yang:ietf-restconf-server"
xmlns:x509c2n="urn:ietf:params:xml:ns:yang:ietf-x509-cert-to-name">
<!-- listening for TLS (HTTPS) connections -->
<listen>
<endpoint>
<name>netconf/tls</name>
<tls>
<address>11.22.33.44</address>
<certificates>
<certificate>
<name>tls-ec-cert</name>
</certificate>
</certificates>
<client-auth>
<trusted-ca-certs>deployment-specific-ca-certs</trusted-ca-certs>
<trusted-client-certs>explicitly-trusted-client-certs</trusted-client-certs>
<cert-maps>
<cert-to-name>
<id>1</id>
<fingerprint>11:0A:05:11:00</fingerprint>
<map-type>x509c2n:san-any</map-type>
</cert-to-name>
<cert-to-name>
<id>2</id>
<fingerprint>B3:4F:A1:8C:54</fingerprint>
<map-type>x509c2n:specified</map-type>
<name>scooby-doo</name>
</cert-to-name>
</cert-maps>
</client-auth>
</tls>
</endpoint>
</listen>
<!-- calling home to a RESTCONF client -->
<call-home>
<restconf-client>
<name>config-manager</name>
<tls>
<endpoints>
<endpoint>
<name>east-data-center</name>
<address>22.33.44.55</address>
</endpoint>
<endpoint>
<name>west-data-center</name>
<address>33.44.55.66</address>
</endpoint>
</endpoints>
<certificates>
<certificate>
<name>tls-ec-cert</name>
</certificate>
</certificates>
<client-auth>
<trusted-ca-certs>deployment-specific-ca-certs</trusted-ca-certs>
<trusted-client-certs>explicitly-trusted-client-certs</trusted-client-certs>
<cert-maps>
<cert-to-name>
<id>1</id>
<fingerprint>11:0A:05:11:00</fingerprint>
<map-type>x509c2n:san-any</map-type>
</cert-to-name>
<cert-to-name>
<id>2</id>
<fingerprint>B3:4F:A1:8C:54</fingerprint>
<map-type>x509c2n:specified</map-type>
<name>scooby-doo</name>
</cert-to-name>
</cert-maps>
</client-auth>
</tls>
<connection-type>
<periodic>
<idle-timeout>300</idle-timeout>
<reconnect-timeout>60</reconnect-timeout>
</periodic>
</connection-type>
<reconnect-strategy>
<start-with>last-connected</start-with>
<max-attempts>3</max-attempts>
</reconnect-strategy>
</restconf-client>
</call-home>
</restconf-server>
This YANG module imports YANG types from [RFC6991] and [RFC7407].
<CODE BEGINS> file "ietf-restconf-server@2017-03-13.yang"
module ietf-restconf-server {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-restconf-server";
prefix "rcs";
//import ietf-netconf-acm {
// prefix nacm;
// reference
// "RFC 6536: Network Configuration Protocol (NETCONF)
// Access Control Model";
//}
import ietf-inet-types {
prefix inet;
reference
"RFC 6991: Common YANG Data Types";
}
import ietf-x509-cert-to-name {
prefix x509c2n;
reference
"RFC 7407: A YANG Data Model for SNMP Configuration";
}
import ietf-tls-server {
prefix ts;
revision-date 2017-03-13; // stable grouping definitions
reference
"RFC ZZZZ: TLS Client and Server Models";
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web: <http://tools.ietf.org/wg/netconf/>
WG List: <mailto:netconf@ietf.org>
WG Chair: Mehmet Ersue
<mailto:mehmet.ersue@nsn.com>
WG Chair: Mahesh Jethanandani
<mailto:mjethanandani@gmail.com>
Editor: Kent Watsen
<mailto:kwatsen@juniper.net>";
description
"This module contains a collection of YANG definitions for
configuring RESTCONF servers.
Copyright (c) 2014 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision "2017-03-13" {
description
"Initial version";
reference
"RFC XXXX: RESTCONF Client and Server Models";
}
// Features
feature listen {
description
"The 'listen' feature indicates that the RESTCONF server
supports opening a port to accept RESTCONF client connections
using at least one transport (e.g., TLS, etc.).";
}
feature tls-listen {
description
"The 'tls-listen' feature indicates that the RESTCONF server
supports opening a port to listen for incoming RESTCONF
client connections.";
reference
"RFC XXXX: RESTCONF Protocol";
}
feature call-home {
description
"The 'call-home' feature indicates that the RESTCONF server
supports initiating RESTCONF call home connections to REETCONF
clients using at least one transport (e.g., TLS, etc.).";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
feature tls-call-home {
description
"The 'tls-call-home' feature indicates that the RESTCONF server
supports initiating connections to RESTCONF clients.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call Home";
}
feature client-cert-auth {
description
"The client-cert-auth feature indicates that the RESTCONF
server supports the ClientCertificate authentication scheme.";
reference
"RFC ZZZZ: Client Authentication over New TLS Connection";
}
// top-level container
container restconf-server {
description
"Top-level container for RESTCONF server configuration.";
container listen {
if-feature listen;
description
"Configures listen behavior";
leaf max-sessions {
type uint16;
default 0; // should this be 'max'?
description
"Specifies the maximum number of concurrent sessions
that can be active at one time. The value 0 indicates
that no artificial session limit should be used.";
}
list endpoint {
key name;
description
"List of endpoints to listen for RESTCONF connections.";
leaf name {
type string;
description
"An arbitrary name for the RESTCONF listen endpoint.";
}
choice transport {
mandatory true;
description
"Selects between available transports.";
case tls {
if-feature tls-listen;
container tls {
description
"TLS-specific listening configuration for inbound
connections.";
leaf address {
type inet:ip-address;
description
"The IP address of the interface to listen on. The
TLS server will listen on all interfaces if no value
is specified. Please note that some addresses have
special meanings (e.g., '0.0.0.0' and '::').";
}
leaf port {
type inet:port-number;
default 443;
description
"The local port number on this interface the TLS server
listens on.";
}
uses ts:tls-server-grouping {
augment "client-auth" {
description
"Augments in the cert-to-name structure.";
uses cert-maps-grouping;
}
}
}
}
}
}
}
container call-home {
if-feature call-home;
description
"Configures call-home behavior";
list restconf-client {
key name;
description
"List of RESTCONF clients the RESTCONF server is to
initiate call-home connections to.";
leaf name {
type string;
description
"An arbitrary name for the remote RESTCONF client.";
}
choice transport {
mandatory true;
description
"Selects between TLS and any transports augmented in.";
case tls {
if-feature tls-call-home;
container tls {
description
"Specifies TLS-specific call-home transport
configuration.";
uses endpoints-container {
refine endpoints/endpoint/port {
default 4336;
}
}
uses ts:tls-server-grouping {
augment "client-auth" {
description
"Augments in the cert-to-name structure.";
uses cert-maps-grouping;
}
}
}
}
}
container connection-type {
description
"Indicates the RESTCONF client's preference for how the
RESTCONF server's connection is maintained.";
choice connection-type {
description
"Selects between available connection types.";
case persistent-connection {
container persistent {
presence true;
description
"Maintain a persistent connection to the RESTCONF
client. If the connection goes down, immediately
start trying to reconnect to it, using the
reconnection strategy.
This connection type minimizes any RESTCONF client
to RESTCONF server data-transfer delay, albeit at
the expense of holding resources longer.";
container keep-alives {
description
"Configures the keep-alive policy, to proactively
test the aliveness of the TLS client. An
unresponsive TLS client will be dropped after
approximately (max-attempts * max-wait)
seconds.";
reference
"RFC 8071: NETCONF Call Home and RESTCONF Call
Home, Section 3.1, item S6";
leaf max-wait {
type uint16 {
range "1..max";
}
units seconds;
default 30;
description
"Sets the amount of time in seconds after which
if no data has been received from the TLS
client, a TLS-level message will be sent to
test the aliveness of the TLS client.";
}
leaf max-attempts {
type uint8;
default 3;
description
"Sets the maximum number of sequential keep-alive
messages that can fail to obtain a response from
the TLS client before assuming the TLS client is
no longer alive.";
}
}
}
}
case periodic-connection {
container periodic {
presence true;
description
"Periodically connect to the RESTCONF client, so that
the RESTCONF client may deliver messages pending for
the RESTCONF server. The client must close the
connection when it's ready to release it. Once the
connection has been closed, the server will restart
its timer until the next connection.";
leaf reconnect-timeout {
type uint16 {
range "1..max";
}
units minutes;
default 60;
description
"The maximum amount of unconnected time the
RESTCONF server will wait before re-establishing
a connection to the RESTCONF client. The
RESTCONF server may initiate a connection to
the RESTCONF client before this time if desired
(e.g., to deliver a notification).";
}
}
}
}
}
container reconnect-strategy {
description
"The reconnection strategy directs how a RESTCONF server
reconnects to a RESTCONF client after after discovering
its connection to the client has dropped, even if due to
a reboot. The RESTCONF server starts with the specified
endpoint and tries to connect to it max-attempts times
before trying the next endpoint in the list (round
robin).";
leaf start-with {
type enumeration {
enum first-listed {
description
"Indicates that reconnections should start with
the first endpoint listed.";
}
enum last-connected {
description
"Indicates that reconnections should start with
the endpoint last connected to. If no previous
connection has ever been established, then the
first endpoint configured is used. RESTCONF
servers SHOULD be able to remember the last
endpoint connected to across reboots.";
}
}
default first-listed;
description
"Specifies which of the RESTCONF client's endpoints the
RESTCONF server should start with when trying to connect
to the RESTCONF client.";
}
leaf max-attempts {
type uint8 {
range "1..max";
}
default 3;
description
"Specifies the number times the RESTCONF server tries to
connect to a specific endpoint before moving on to the
next endpoint in the list (round robin).";
}
}
}
}
}
grouping cert-maps-grouping {
description
"A grouping that defines a container around the
cert-to-name structure defined in RFC 7407.";
container cert-maps {
uses x509c2n:cert-to-name;
description
"The cert-maps container is used by a TLS-based RESTCONF
server to map the RESTCONF client's presented X.509
certificate to a RESTCONF username. If no matching and
valid cert-to-name list entry can be found, then the
RESTCONF server MUST close the connection, and MUST NOT
accept RESTCONF messages over it.";
reference
"RFC XXXX: The RESTCONF Protocol";
}
}
grouping endpoints-container {
description
"This grouping is used by tls container for call-home
configurations.";
container endpoints {
description
"Container for the list of endpoints.";
list endpoint {
key name;
unique "address port";
min-elements 1;
ordered-by user;
description
"User-ordered list of endpoints for this RESTCONF client.
Defining more than one enables high-availability.";
leaf name {
type string;
description
"An arbitrary name for this endpoint.";
}
leaf address {
type inet:host;
mandatory true;
description
"The IP address or hostname of the endpoint. If a
hostname is configured and the DNS resolution results
in more than one IP address, the RESTCONF server
will process the IP addresses as if they had been
explicitly configured in place of the hostname.";
}
leaf port {
type inet:port-number;
description
"The IP port for this endpoint. The RESTCONF server will
use the IANA-assigned well-known port if no value is
specified.";
}
}
}
}
}
<CODE ENDS>
The YANG module defined in this document uses a grouping defined in [I-D.ietf-netconf-tls-client-server]. Please see the Security Considerations section in that document for concerns related that grouping.
The YANG module defined in this document is designed to be accessed via YANG based management protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols have mandatory-to-implement secure transport layers (e.g., SSH, TLS) with mutual authentication.
The NETCONF access control model (NACM) [RFC6536] provides the means to restrict access for particular users to a pre-configured subset of all available protocol operations and content.
There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability:
Some of the readable data nodes in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability:
Some of the RPC operations in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control access to these operations. These are the operations and their sensitivity/vulnerability:
This document registers two URIs in the IETF XML registry [RFC3688]. Following the format in [RFC3688], the following registrations are requested:
URI: urn:ietf:params:xml:ns:yang:ietf-restconf-client Registrant Contact: The NETCONF WG of the IETF. XML: N/A, the requested URI is an XML namespace. URI: urn:ietf:params:xml:ns:yang:ietf-restconf-server Registrant Contact: The NETCONF WG of the IETF. XML: N/A, the requested URI is an XML namespace.
This document registers two YANG modules in the YANG Module Names registry [RFC7950]. Following the format in [RFC7950], the the following registrations are requested:
name: ietf-restconf-client namespace: urn:ietf:params:xml:ns:yang:ietf-restconf-client prefix: ncc reference: RFC XXXX name: ietf-restconf-server namespace: urn:ietf:params:xml:ns:yang:ietf-restconf-server prefix: ncs reference: RFC XXXX
The authors would like to thank for following for lively discussions on list and in the halls (ordered by last name): Andy Bierman, Martin Bjorklund, Benoit Claise, Mehmet Ersue, David Lamparter, Alan Luchuk, Ladislav Lhotka, Radek Krejci, Tom Petch, Phil Shafer, Sean Turner, and Bert Wijnen.
Juergen Schoenwaelder and was partly funded by Flamingo, a Network of Excellence project (ICT-318488) supported by the European Commission under its Seventh Framework Programme.
| [I-D.ietf-netconf-keystore] | Watsen, K. and G. Wu, "Keystore Model", Internet-Draft draft-ietf-netconf-keystore-00, October 2016. |
| [I-D.ietf-netconf-tls-client-server] | Watsen, K., "TLS Client and Server Models", Internet-Draft draft-ietf-netconf-tls-client-server-01, November 2016. |
| [RFC2119] | Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997. |
| [RFC6536] | Bierman, A. and M. Bjorklund, "Network Configuration Protocol (NETCONF) Access Control Model", RFC 6536, DOI 10.17487/RFC6536, March 2012. |
| [RFC6991] | Schoenwaelder, J., "Common YANG Data Types", RFC 6991, DOI 10.17487/RFC6991, July 2013. |
| [RFC7407] | Bjorklund, M. and J. Schoenwaelder, "A YANG Data Model for SNMP Configuration", RFC 7407, DOI 10.17487/RFC7407, December 2014. |
| [RFC7950] | Bjorklund, M., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, August 2016. |
| [RFC3688] | Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004. |
| [RFC5246] | Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008. |
| [RFC6241] | Enns, R., Bjorklund, M., Schoenwaelder, J. and A. Bierman, "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011. |
| [RFC8040] | Bierman, A., Bjorklund, M. and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017. |
| [RFC8071] | Watsen, K., "NETCONF Call Home and RESTCONF Call Home", RFC 8071, DOI 10.17487/RFC8071, February 2017. |
Please see: https://github.com/netconf-wg/restconf-client-server/issues.