| NETCONF | E. Voit |
| Internet-Draft | Cisco Systems |
| Intended status: Standards Track | A. Clemm |
| Expires: June 25, 2018 | Huawei |
| A. Gonzalez Prieto | |
| VMWare | |
| E. Nilsen-Nygaard | |
| A. Tripathy | |
| Cisco Systems | |
| December 22, 2017 |
Custom Subscription to Event Streams
draft-ietf-netconf-subscribed-notifications-08
This document defines capabilities and operations for the customized establishment of subscriptions upon a publisher's event streams. Also defined are delivery mechanisms for instances of the resulting notification messages. Effectively this allows a subscriber to request and receive a continuous, custom feed of publisher generated information.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on June 25, 2018.
Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
This document defines capabilities and operations for the customized establishment of subscriptions upon system generated event streams. Effectively this enables a "subscribe then publish" capability where the customized information needs of each target receiver are understood by the publisher before subscribed event records are marshalled and pushed. The receiver then gets a continuous, custom feed of publisher generated information.
While the functionality defined in this document is transport-agnostic, protocols like NETCONF [RFC6241] or RESTCONF [RFC8040] can be used to configure or dynamically signal subscriptions, and there are bindings defined for subscribed event record delivery for NETCONF within [I-D.draft-ietf-netconf-netconf-event-notifications], and for HTTP2 or HTTP1.1 within [I-D.draft-ietf-netconf-restconf-notif].
There are various [RFC5277] limitations, many of which have been exposed in [RFC7923] which needed to be solved. Key capabilities supported by this document include:
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.
Configured subscription: A subscription installed via a configuration interface which persists across reboots.
Dynamic subscription: A subscription agreed between subscriber and publisher created via an establish-subscription RPC.
Event: An occurrence of something that may be of interest. (e.g., a configuration change, a fault, a change in status, crossing a threshold, or an external input to the system.)
Event record: A set of information detailing an event.
NACM: NETCONF Access Control Model.
Notification message: A set of transport encapsulated information intended for a receiver indicating that one or more event(s) have occurred. A notification message may bundle multiple event records. This includes the bundling multiple, independent RFC 7950 YANG notifications.
Publisher: An entity responsible for streaming notification messages per the terms of a Subscription.
Receiver: A target to which a publisher pushes subscribed event records. For dynamic subscriptions, the receiver and subscriber are the same entity.
Stream (also referred to as "event stream"): A continuous ordered set of events aggregated under some context.
Stream filter: Evaluation criteria which may be applied against event records within a stream. Event records pass the filter when specified criteria are met.
Subscribed event records: Event records which have met the terms of the subscription. This include terms (such as security checks) enforced by the publisher.
Subscriber: An entity able to request and negotiate a contract for the generation and push of event records from a publisher.
Subscription: A contract with a publisher, stipulating which information one or more receivers wish to have pushed from the publisher without the need for further solicitation.
This document describes a transport agnostic mechanism for subscribing to and receiving content from a stream instantiated within a publisher. This mechanism is through the use of a subscription.
Two types of subscriptions are supported:
Additional characteristics differentiating configured from dynamic subscriptions include:
Note that there is no mixing-and-matching of dynamic and configured operations on a single subscriptions. Specifically, a configured subscription cannot be modified or deleted using RPCs defined in this document. Similarly, a subscription established via RPC cannot be modified through configuration operations. Also note that transport specific transport drafts based on this specification MUST detail the life cycles of both dynamic and configured subscriptions.
The publisher MAY decide to terminate a dynamic subscription at any time. Similarly, it MAY decide to temporarily suspend the sending of notification messages for any dynamic subscription, or for one or more receivers of a configured subscription. Such termination or suspension is driven by internal considerations of the publisher.
This document is intended to provide a superset of the subscription capabilities initially defined within [RFC5277]. Especially when extending an existing [RFC5277] implementation, it is important to understand what has been reused and what has been replaced. Key relationships between these two documents include:
An event stream is a named entity on a publisher which exposes a continuously updating set of event records. Each event stream is available for subscription. It is out of the scope of this document to identify a) how streams are defined, b) how event records are defined/generated, and c) how event records are assigned to streams.
There is only one reserved event stream within this document: NETCONF. The NETCONF event stream contains all NETCONF XML event record information supported by the publisher, except for where it has been explicitly indicated that this the event record MUST be excluded from the NETCONF stream. The NETCONF stream will include individual YANG notifications as per [RFC7950] section 7.16. Each of these YANG notifications will be treated a distinct event record. Beyond the NETCONF stream, implementations are free to add additional event streams.
As event records are created by a system, they may be assigned to one or more streams. The event record is distributed to subscription's receiver(s) where: (1) a subscription includes the identified stream, and (2) subscription filtering does not exclude the event record from that receiver.
If access control permissions are in use to secure publisher content, then for event records to be sent to a receiver, that receiver MUST be allowed access to all the event records on the stream. If subscriber permissions change during the lifecycle of a subscription, then the subscription MUST be continued or terminated accordingly.
This document defines an extensible filtering mechanism. Two optional stream filtering syntaxes supported are [XPATH] and subtree [RFC6241]. A filter always removes a complete event record; a subset of information is never stripped from an event record.
If no stream filter is provided within a subscription, all event records on a stream are to be sent.
This document provides an optional feature describing QoS parameters. These parameters indicate the treatment of a subscription relative to other traffic between publisher and receiver. Included are:
A subscription's weighting MUST work identically to stream dependency weighting as described within RFC 7540, section 5.3.2.
A subscription's dependency MUST work identically to stream dependency as described within [RFC7540], sections 5.3.1, 5.3.3, and 5.3.4. If a dependency is attempted via an RPC, but the referenced subscription does not exist, the dependency will be silently removed.
Dynamic subscriptions are managed via RPC, and are made against targets located within the publisher. These RPCs have been designed extensibly so that they may be augmented for subscription targets beyond event streams.
Below is the publisher's state machine for a dynamic subscription. It is important to note that such a subscription doesn't exist at the publisher until it an "establish-subscription" RPC is accepted. The mere request by a subscriber to establish a subscription is insufficient for that asserted subscription to be externally visible.
.-------.
| start |
'-------'
|
establish-subscription
|
| .------modify-subscription-------.
v v '
.-----------. .-----------.
.--------. | receiver |-subscription-suspended->| receiver |
modify- '| active | | suspended |
subscription | |<--subscription-resumed--| |
---------->'-----------' '-----------'
| |
delete/kill-subscription delete/kill-
| subscription
v |
.-------. |
| end |<-------------------------------'
'-------'
Dynamic subscription state
Of interest in this state machine are the following:
The "establish-subscription" operation allows a subscriber to request the creation of a subscription via RPC. It MUST be possible to support multiple establish subscription RPC requests made within the same transport session.
The input parameters of the operation are:
If the publisher can satisfy the "establish-subscription" request, it provides an identifier for the subscription, and immediately starts streaming notification messages. If the subscriber has no authorization to establish the subscription, transport protocol specific replies are used to indicate an authorization error. If an RPC request is properly framed, but publisher cannot satisfy the "establish-subscription" request, the publisher MUST send a negative "subscription-result" element describing the reason for the failure. Optionally, the "subscription-result" MAY be accompanied by one or more hints on alternative inputs which would have resulted in an accepted subscription.
"establish-subscription" requests MUST fail if a filter with invalid or unsupportable syntax is provided, or if a non-existent stream is referenced.
+---x establish-subscription
+---w input
| +---w encoding? encoding
| +---w (target)
| | +--:(stream)
| | +---w (stream-filter)?
| | | +--:(by-reference)
| | | | +---w stream-filter-ref stream-filter-ref
| | | +--:(within-subscription)
| | | +---w (filter-spec)?
| | | +--:(stream-subtree-filter)
| | | | +---w stream-subtree-filter? {subtree}?
| | | +--:(stream-xpath-filter)
| | | +---w stream-xpath-filter?
| | | yang:xpath1.0 {xpath}?
| | +---w stream? stream-ref
| | +---w replay-start-time? yang:date-and-time {replay}?
| +---w stop-time? yang:date-and-time
| +---w dscp? inet:dscp {qos}?
| +---w weighting? uint8 {qos}?
| +---w dependency? sn:subscription-id {qos}?
+--ro output
+--ro subscription-result subscription-result
+--ro (result)?
+--:(no-success)
| +--ro filter-failure? string
| +--ro replay-start-time-hint? yang:date-and-time
+--:(success)
+--ro identifier subscription-id
Figure 1: establish-subscription RPC
Replay provides the ability to establish a subscription which is also capable of passing recently generated event records. In other words, as the subscription initializes itself, it sends any previously generated content from within target event stream which meets the filter and timeframe criteria. These historical event records would then be followed by event records generated after the subscription has been established. All event records will be delivered in the order generated.
Replay is an optional feature which is dependent on an event stream supporting some form of logging. Replay puts no restrictions on the size or form of the log, or where it resides within the device.
The inclusion of a replay-start-time within an "establish-subscription" RPC indicates a replay request. If the "replay-start-time" contains a value that is earlier than content stored within the publisher's replay buffer, then the subscription MUST be rejected, and the leaf "replay-start-time-hint" MUST be set in the reply.
If a "stop-time" parameter is included, it MAY also be earlier than the current time and MUST be later than the "replay-start-time". The publisher MUST NOT accept a "replay-start-time" for a future time.
If the "replay-start-time" is later than any information stored in the replay buffer, then the publisher MUST send a "replay-completed" notification immediately after the "subscription-started" notification.
If a stream supports replay, the "replay-support" leaf is present in the "/streams/stream" list entry for the stream. An event stream that does support replay is not expected to have an unlimited supply of saved notifications available to accommodate any given replay request. To assess the availability of replay, subscribers can perform a get on "replay-log-creation-time" and "replay-log-aged-time". See Figure 8 for the tree describing these elements. The actual size of the replay log at any given time is a publisher specific matter. Control parameters for the replay log are outside the scope of this document.
The "modify-subscription" operation permits changing the terms of an existing dynamic subscription previously established on that transport session via "establish-subscription". Dynamic subscriptions can be modified one or multiple times. If the publisher accepts the requested modifications, it replies with "ok" in the "subscription-result", then immediately starts sending event records based on the new terms. If the publisher rejects the request, the subscription remains as prior to the request. That is, the request has no impact whatsoever. The contents of a such a rejected modification MAY include one or more hints on alternative inputs which would have resulted in a successfully modified subscription.
If the publisher accepts the requested modifications on a currently suspended subscription, the subscription will immediately be resumed (i.e., the modified subscription is returned to an active status.) The publisher MAY immediately suspend this newly modified subscription through the "subscription-suspended" notification before any event records are sent.
+---x modify-subscription
+---w input
| +---w identifier? subscription-id
| +---w (target)
| | +--:(stream)
| | +---w (stream-filter)?
| | +--:(by-reference)
| | | +---w stream-filter-ref stream-filter-ref
| | +--:(within-subscription)
| | +---w (filter-spec)?
| | +--:(stream-subtree-filter)
| | | +---w stream-subtree-filter? {subtree}?
| | +--:(stream-xpath-filter)
| | +---w stream-xpath-filter?
| | yang:xpath1.0 {xpath}?
| +---w stop-time? yang:date-and-time
+--ro output
+--ro subscription-result subscription-result
+--ro (result)?
+--:(no-success)
+--ro filter-failure? string
Figure 2: modify-subscription RPC
Dynamic subscriptions established via RPC can only be modified via RPC using the same transport session used to establish that subscription. Subscriptions created by configuration operations cannot be modified via this RPC.
The "delete-subscription" operation permits canceling an existing subscription previously established on that transport session. If the publisher accepts the request, and the publisher has indicated this success via an "ok" in the "subscription-result", the publisher MUST NOT send any more notification messages for this subscription. If the publisher rejects the request, the request has no impact whatsoever on any subscription.
+---x delete-subscription
+---w input
| +---w identifier subscription-id
+--ro output
+--ro subscription-result subscription-result
Figure 3: delete-subscription RPC
Dynamic subscriptions can only be deleted via this RPC using the same transport session previously used for subscription establishment. Configured subscriptions cannot be deleted using RPCs.
The "kill-subscription" operation permits an operator to end a dynamic subscription which is not associated with the transport session used for the RPC. This operation MUST be secured so that only connections with sufficiently privileged access rights are able to invoke this RPC. A publisher MUST terminate any dynamic subscription identified by RPC request. An operator may find subscription identifiers which may be used with "kill-subscription" by searching for the IP address of a receiver within "subscriptions\subscription\receivers\receiver\address".
Configured subscriptions cannot be killed using this RPC. Instead, configured subscriptions are deleted as part of regular configuration operations. Publishers MUST reject any RPC attempt to kill a configured subscription.
The tree structure of "kill-subscription" is almost identical to "delete-subscription", with only the name of the RPC changing.
A configured subscription is a subscription installed via a configuration interface. Configured subscriptions may be modified by any configuration client with the proper permissions. Subscriptions can be modified or terminated via the configuration interface at any point of their lifetime.
Configured subscriptions have several characteristics distinguishing them from dynamic subscriptions:
Supporting configured subscriptions is optional and advertised using the "configured" feature.
In addition to subscription parameters available to dynamic subscriptions as described in Section 2.4.2, the following additional parameters are also available to configured subscriptions:
Below is the state machine for a configured subscription. The creation or modification of a configured subscription initiates a publisher evaluation to determine if the subscription is valid or invalid. The publisher uses its own criteria in making this determination. If valid, the subscription becomes operational.
.-------.
| start |-.
'-------' |
create .---modify-----.----------------------------------.
| | | |
V V .-------. .-----. .---------.
.----[evaluate]--no--->|invalid|-delete->| end |<-delete-|concluded|
| '-------' '-----' '---------'
|----[evaluate]--no-. ^ ^ ^
| ^ | | | |
yes | '->unsupportable delete stop-time
| modify (subscription- (subscription- (subscription-
| | terminated) terminated) concluded)
| | | | |
| .---------------------------------------------------------------.
'-->| valid |
'---------------------------------------------------------------'
Configured subscription status.
A valid subscription may become invalid on one of two ways. First, it may be modified in a way which fails a re-evaluation. Second, the publisher itself might itself determine that the subscription in no longer supportable. In either case, a "subscription-terminated" notification is sent to any active or suspended receivers. A valid subscription may also transtion to a concluded status if a configured stop time has been reached. In this case, a "subscription-concluded" is sent to any active or suspended receivers.
During any times a subscription is considered valid, a publisher will attempt to connect with all configured receivers and deliver notification messages. Below is the state machine for each receiver of a configured subscription. This receiver state machine itself is fully contained within the state machine of the configured subscription, and is only relevant when the configured subscription itself is determined to be valid.
.----------------------------------------------------------------.
| valid |
| .----------. .--------. |
| | receiver |------------------timeout->|receiver| |
| |connecting|<------------------reset---|timeout | |
| | |<-transport---. '--------' |
| '----------' loss,reset | |
| | | | |
| (subscription | | |
| started) .--------. | .---------. |
| '----->| | '----------------------| | |
| |receiver|-(subscription-suspended)-->|receiver | |
|(subscription-| active | |suspended| |
| modified) | |<-(subscription-resumed,----| | |
| '---->'--------' subscription-modified) '---------' |
'----------------------------------------------------------------'
Configured receiver state
When a subscription first becomes valid, the operational status of each receiver is initialized to connecting. Individual are receivers are moved to an active status when a "subscription-started" state change notification is successfully passed to that receiver. Configured receivers remain active if transport connectivity is not lost, and event records are not being dropped due to a publisher buffer overflow. A configured subscription's receiver MUST be moved to connecting if transport connectivity is lost, or if the receiver is reset via configuration operations.
A configured subscription's receiver MUST be moved to a suspended state if there is transport connectivity between the publisher and receiver, but notification messages are not being generated for that receiver. A configured subscription receiver MUST be returned to an active state from the suspended state when notification messages are again being generated and a receiver has successfully been sent a "subscription-resumed" or a "subscription-modified".
Modification of a configured subscription is possible at any time. A "subscription-modified" state change notification will be sent to all active receivers, immediately followed by notification messages conforming to the new parameters. Suspended receivers will also be informed of the modification. However this notification will await the end of the suspension for that receiver.
The mechanisms described above is mirrored in the RPCs and YANG notifications within the document. It should be noted that these RPCs and YANG notifications have been designed to be extensible and allow subscriptions into targets other than event streams. [I-D.ietf-netconf-yang-push] provides an example of such an extension.
Configured subscriptions are established using configuration operations against the top-level subtree "subscription-config". There are two key differences between the new RPCs defined in this document and configuration operations for subscription creation. Firstly, configuration operations install a subscription without question, while the RPCs are designed to the support negotiation and rejection of requests. Secondly, while the RPCs mandate that the subscriber establishing the subscription is the only receiver of the notification messages, configuration operations permit specifying receivers independent of any tracked subscriber. Because there is no explicit association with an existing transport session, configuration operations require additional parameters beyond those of dynamic subscriptions to indicate receivers, and possibly whether the notification messages need to come from a specific egress interface on the publisher.
After a subscription is successfully created, the publisher immediately sends a "subscription-started" state change notification to each receiver. It is quite possible that upon configuration, reboot, or even steady-state operations, a transport session may not be currently available to the receiver. In this case, when there is something to transport for an active subscription, transport specific call-home operations will be used to establish the connection. When transport connectivity is available, notification messages may then be pushed.
With active configured subscriptions, it is allowable to buffer event records even after a "subscription-started" has been sent. However if events are lost (rather than just delayed) due to replay buffer overflow, a new "subscription-started" must be sent. This new "subscription-started" indicates an event record discontinuity.
To see an example at subscription creation using configuration operations over NETCONF, see Appendix A of [I-D.draft-ietf-netconf-netconf-event-notifications].
Note that is possible to configure replay on a configured subscription. This capability is to allow a configured subscription to exist on a system so that event records generated during boot can be buffered and pushed as soon as the transport session is established.
Configured subscriptions can be modified using configuration operations against the top-level subtree "subscription-config".
If the modification involves adding receivers, added receivers are placed in the "connecting" state. If a receiver is removed, the state change notification "subscription-terminated" is sent to that receiver if that receiver is "active" or "suspended" .
If the modification involved changing the policies for the subscription, the publisher sends to currently active receivers a "subscription-modified" notification. For any suspended receivers, a "subscription-modified" notification will be delayed until the receiver is resumed. (Note: in this case, the "subscription-modified" notification informs the receiver that the subscription has been resumed, so no additional "subscription-resumed" need be sent.)
Subscriptions can be deleted using configuration operations against the top-level subtree "subscription-config".
Immediately after a subscription is successfully deleted, the publisher sends to all receivers of that subscription a state change notification stating the subscription has ended (i.e., "subscription-terminated").
It is possible that a configured subscription to a receiver needs to be reset. This re-initialization may be useful in cases where a publisher has timed out trying to reach a receiver. When such a reset occurs, a transport session will be initiated if necessary, and a new "subscription-started" notification will be sent.
Whether dynamic or configured, once a subscription has been set up, the publisher streams event records via notification messages per the terms of the subscription. For dynamic subscriptions set up via RPC operations, notification messages are sent over the session used to establish the subscription. For configured subscriptions, notification messages are sent over the connections specified by the transport, plus receiver IP address and port configured.
A notification message is sent to a receiver when an event record is able to traverse the specified filter criteria. This notification message MUST be encoded as one-way notification element of [RFC5277], Section 4. The following example within [RFC7950] section 7.16.3 is an example of a compliant message:
<notification
xmlns="urn:ietf:params:xml:ns:netconf:notification:1.0">
<eventTime>2007-09-01T10:00:00Z</eventTime>
<link-failure xmlns="http://acme.example.com/system">
<if-name>so-1/2/3.0</if-name>
<if-admin-status>up</if-admin-status>
<if-oper-status>down</if-oper-status>
</link-failure>
</notification>
Figure 4: subscribed notification message
This [RFC5277] section 4 one-way operation has the drawback of not including useful header information such as a subscription identifier. When using this mechanism, it is left up to implementations or augmentations to this document to determine which event records belong to which subscription.
These drawbacks, along with other useful common headers and the ability to bundle multiple event records together is being explored within [I.D.draft-ietf-netconf-notification-messages]. When the notification-messages is supported, this document will be updated to indicate support.
In addition to subscribed event records, a publisher will send subscription state notifications to indicate to receivers that an event related to the subscription management has occurred.
Subscription state notifications are unlike other notifications which might be found in the event stream. They cannot be filtered out, and they are delivered only to directly impacted receiver(s) of a subscription. The identification of subscription state notifications is easy to separate from other notification messages through the use of the YANG extension "subscription-state-notif". This extension tags a notification as subscription state notification.
The complete set of subscription state notifications is described in the following subsections.
This notification indicates that a configured subscription has started, and event records may be sent. Included in this state change notification are all the parameters of the subscription, except for the receiver(s) addressing information and origin information indicating where notification messages will egress the publisher. Note that if a referenced filter from the "filters" container has been used within the subscription, the notification will include the contents of that referenced under the "within-subscription" subtree.
Note that for dynamic subscriptions, no "subscription-started" notifications are ever sent.
+---n subscription-started {configured}?
+--ro identifier subscription-id
+--ro protocol transport {configured}?
+--ro encoding encoding
+--ro (target)
| +--:(stream)
| +--ro (stream-filter)?
| | +--:(by-reference)
| | | +--ro stream-filter-ref stream-filter-ref
| | +--:(within-subscription)
| | +--ro (filter-spec)?
| | +--:(stream-subtree-filter)
| | | +--ro stream-subtree-filter? {subtree}?
| | +--:(stream-xpath-filter)
| | +--ro stream-xpath-filter? yang:xpath1.0 {xpath}?
| +--ro stream stream
| +--ro replay-start-time? yang:date-and-time {replay}?
+--ro stop-time? yang:date-and-time
+--ro dscp? inet:dscp {qos}?
+--ro weighting? uint8 {qos}?
+--ro dependency? sn:subscription-id {qos}?
Figure 5: subscription-started notification
This notification indicates that a subscription has been modified by configuration operations. The same parameters of "subscription-started" are provided via this notification. As a result, the tree structure of "subscription-modified" is almost identical to "subscription-started", with only the name of the notification changing.
A publisher most often sends this notification directly after the modification of any configuration parameters impacting a configured subscription. But it may also be sent at two other times.
This notification indicates that a subscription has been terminated on the publisher. The state change notification includes the reason for the termination.
The publisher MAY decide to terminate a subscription rather than continuing to serve it. Such a decision may be made when a publisher runs out of resources, an internal error occurs, or some other reason. Publisher-driven terminations are always notified to all receivers.
Subscribers themselves can terminate existing subscriptions established via a "delete-subscription" RPC. In such cases, no "subscription-terminated" state change notifications are sent. However if a "kill-subscription" RPC is sent, or some other event other than reaching the subscription's stop time results in the end of a subscription, then this state change notification MUST be sent.
+---n subscription-terminated
+--ro identifier subscription-id
+--ro error-id subscription-errors
+--ro filter-failure? string
Figure 6: subscription-terminated notification
This notification indicates that a publisher has suspended the sending of event records to a receiver, and also indicates the possible loss of events. The state change notification includes the reason for the suspension. No further notification will be sent until the subscription resumes.
The tree structure of "subscription-suspended" is almost identical to "subscription-terminated", with only the name of the notification changing.
This indicates that a previously suspended subscription has been resumed under the unmodified terms previously in place. Subscribed event records generated after the generation of this state change notification will be sent.
+---n subscription-resumed
+--ro identifier subscription-id
Figure 7: subscription-resumed notification
This notification indicates that a subscription, which includes a "stop-time", has successfully finished passing event records upon the reaching of that time.
The tree structure of "subscription-completed" is almost identical to "subscription-resumed", with only the name of the notification changing.
This notification indicates that all of the event records prior to the current time have been sent. This includes new event records generated since the start of the subscription. This notification MUST NOT be sent for any other reason.
If subscription contains no "stop-time", or has a "stop-time" which has not been reached, then after the "replay-completed" notification has been sent, additional event records will be sent in sequence as they arise naturally on the publisher.
The tree structure of "replay-completed" is almost identical to "subscription-resumed", with only the name of the notification changing.
Container "subscriptions" in the YANG module contains the state of all known subscriptions. This includes subscriptions that were established (and have not yet been deleted) using RPCs, as well as subscriptions that have been configured as part of configuration. Using the "get" operation with NETCONF, or subscribing to this information via [I-D.ietf-netconf-yang-push] allows the status of subscriptions to be monitored.
Each subscription is represented as a list element. The associated information includes an identifier for the subscription, receiver counter information, the status of the subscription, as well as the various subscription parameters that are in effect. The subscription status indicates the subscription's state with each receiver (e.g., is currently active or suspended). Leaf "configured-subscription" indicates whether the subscription came into being via configuration or via RPC.
Subscriptions that were established by RPC are removed from the list once they expire (reaching stop-time) or when they are terminated. Subscriptions that were established by configuration need to be deleted from the configuration by a configuration editing operation even if the stop time has been passed.
Publishers supporting this document MUST indicate support the YANG model "ietf-subscribed-notifications" within the YANG library of the publisher. In addition support for optional features: "encode-xml", "encode-json", "configured" "supports-vrf", and "replay" MUST also be indicated if supported.
If a publisher supports this specification but not subscriptions via [RFC5277], the publisher MUST NOT advertise "urn:ietf:params:netconf:capability:notification:1.0". Even without this advertisement however, the publisher MUST support the one-way notification element of [RFC5277] Section 4.
This section contains tree diagrams for top level YANG Data Node containers defined in Section 4. If you would rather see tree diagrams for Notifications, see Section 2.7. Or for the tree diagrams for the RPCs, see Section 2.4.
A publisher maintains a list of available event streams as operational data. This list contains both standardized and vendor-specific event streams. The list of event streams that are supported by the publisher and against which subscription is allowed may be acquired from the "streams" container within the YANG module.
+--rw streams
+--rw stream* [name]
+--rw name stream
+--rw description string
+--rw replay-support? empty {replay}?
+--rw replay-log-creation-time? yang:date-and-time {replay}?
+--rw replay-log-aged-time? yang:date-and-time {replay}?
Figure 8: Stream Container
The "filters" container maintains a list of all subscription filters which persist outside the life-cycle of a single subscription. This enables pre-defined and validated filters which may be referenced and used by more than one subscription.
+--rw filters
+--rw stream-filter* [identifier]
+--rw identifier filter-id
+--rw (filter-spec)?
+--:(stream-subtree-filter)
| +--rw stream-subtree-filter? {subtree}?
+--:(stream-xpath-filter)
+--rw stream-xpath-filter? yang:xpath1.0 {xpath}?
Figure 9: Filter Container
The "subscriptions" container maintains a list of all subscriptions on a publisher, both configured and dynamic. It can be used to retrieve information about the subscriptions which a publisher is serving.
+--ro subscriptions
+--ro subscription* [identifier]
+--ro identifier subscription-id
+--ro configured-subscription-state? enumeration {configured}?
+--ro purpose? string {configured}?
+--ro protocol transport {configured}?
+--ro encoding encoding
+--ro (target)
| +--:(stream)
| +--ro (stream-filter)?
| | +--:(by-reference)
| | | +--ro stream-filter-ref stream-filter-ref
| | +--:(within-subscription)
| | +--ro (filter-spec)?
| | +--:(stream-subtree-filter)
| | | +--ro stream-subtree-filter? {subtree}?
| | +--:(stream-xpath-filter)
| | +--ro stream-xpath-filter?
| | yang:xpath1.0 {xpath}?
| +--ro stream? stream-ref
| +--ro replay-start-time? yang:date-and-time {replay}?
+--ro stop-time? yang:date-and-time
+--ro dscp? inet:dscp {qos}?
+--ro weighting? uint8 {qos}?
+--ro dependency? sn:subscription-id {qos}?
+--ro (notification-message-origin)?
| +--:(interface-originated)
| | +--ro source-interface? if:interface-ref
| +--:(address-originated)
| +--ro source-vrf? ->
| /ni:network-instances/network-instance/name {supports-vrf}?
| +--ro source-address? inet:ip-address-no-zone
+--ro receivers
+--ro receiver* [address port]
+--ro address inet:host
+--ro port inet:port-number
+--ro pushed-notifications? yang:counter64
+--ro excluded-notifications? yang:counter64
+--ro status enumeration
+---x reset
+--ro output
+--ro time yang:date-and-time
"Subscription-config" container contains the configuration of configured subscriptions.
+--rw subscription-config {configured}?
+--rw subscription* [identifier]
+--rw identifier subscription-id
+--rw purpose? string
+--rw protocol transport {configured}?
+--rw encoding encoding
+--rw (target)
| +--:(stream)
| +--rw (stream-filter)?
| | +--:(by-reference)
| | | +--rw stream-filter-ref stream-filter-ref
| | +--:(within-subscription)
| | +--rw (filter-spec)?
| | +--:(stream-subtree-filter)
| | | +--rw stream-subtree-filter? {subtree}?
| | +--:(stream-xpath-filter)
| | +--rw stream-xpath-filter? yang:xpath1.0 {xpath}?
| +--rw stream? stream-filter-ref
| +--rw replay-start-time? yang:date-and-time {replay}?
+--rw stop-time? yang:date-and-time
+--rw dscp? inet:dscp {qos}?
+--rw weighting? uint8 {qos}?
+--rw dependency? sn:subscription-id {qos}?
+--rw (notification-message-origin)?
| +--:(interface-originated)
| | +--rw source-interface? if:interface-ref
| +--:(address-originated)
| +--rw source-vrf? ->
| | /ni:network-instances/network-instance/name {supports-vrf}?
| +--rw source-address? inet:ip-address-no-zone
+--rw receivers
+--rw receiver* [address port]
+--rw address inet:host
+--rw port inet:port-number
<CODE BEGINS> file "ietf-subscribed-notifications.yang"
module ietf-subscribed-notifications {
yang-version 1.1;
namespace
"urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications";
prefix sn;
import ietf-yang-types {
prefix yang;
}
import ietf-inet-types {
prefix inet;
}
import ietf-interfaces {
prefix if;
}
import ietf-network-instance {
prefix ni;
}
organization "IETF";
contact
"WG Web: <http:/tools.ietf.org/wg/netconf/>
WG List: <mailto:netconf@ietf.org>
Editor: Alexander Clemm
<mailto:ludwig@clemm.org>
Editor: Eric Voit
<mailto:evoit@cisco.com>
Editor: Alberto Gonzalez Prieto
<mailto:agonzalezpri@vmware.com>
Editor: Einar Nilsen-Nygaard
<mailto:einarnn@cisco.com>
Editor: Ambika Prasad Tripathy
<mailto:ambtripa@cisco.com>";
description
"Contains a YANG specification for subscribing to event records
and receiving matching content within notification messages.";
revision 2017-12-20 {
description
"Initial version";
reference
"draft-ietf-netconf-subscribed-notifications-08";
}
/*
* FEATURES
*/
feature encode-json {
description
"This feature indicates that JSON encoding of notification
messages is supported.";
}
feature encode-xml {
description
"This feature indicates that XML encoding of notification
messages is supported.";
}
feature configured {
description
"This feature indicates that configuration of subscription is
supported.";
}
feature replay {
description
"This feature indicates that historical event record replay is
supported. With replay, it is possible for past event records to
be streamed in chronological order.";
}
feature xpath {
description
"This feature indicates support for xpath filtering.";
reference "http://www.w3.org/TR/1999/REC-xpath-19991116";
}
feature subtree {
description
"This feature indicates support for YANG subtree filtering.";
reference "RFC 6241, Section 6.";
}
feature supports-vrf {
description
"This feature indicates a publisher supports VRF configuration
for configured subscriptions. VRF support for dynamic
subscriptions does not require this feature.";
reference "draft-ietf-rtgwg-ni-model";
}
feature qos {
description
"This feature indicates a publisher supports one or more optional
Quality of Service (QoS) features to differentiate update record
treatment between publisher and receiver.";
}
/*
* EXTENSIONS
*/
extension subscription-state-notification {
description
"This statement applies only to notifications. It indicates that
the notification is a subscription state notification. Therefore
it does not participate in a regular event stream and does not
need to be specifically subscribed to in order to be received.
This statement can only occur as a substatement to the YANG
'notification' statement.";
}
/*
* IDENTITIES
*/
/* Identities for subscription results */
identity subscription-result {
description
"Base identity for RPC responses and State Change Notifications
providing information on the creation, modification, deletion of
subscriptions.";
}
identity ok {
base subscription-result;
description
"OK - RPC was successful and was performed as requested.";
}
identity error {
base subscription-result;
description
"Problem with subscription. Base identity for error return
codes for RPCs and State Change Notifications.";
}
/* Identities for subscription errors */
identity suspension-timeout {
base error;
description
"Termination of previously suspended subscription. The publisher
has eliminated the subscription as it exceeded a time limit for
suspension.";
}
identity stream-unavailable {
base error;
description
"Stream does not exist or is not available to the receiver.";
}
identity encoding-unavailable {
base error;
description
"Encoding not supported";
}
identity replay-unsupported {
base error;
description
"Replay cannot be performed for this subscription. The publisher
does not provide the requested historic information via replay.";
}
identity history-unavailable {
base error;
description
"Replay request too far into the past. The publisher does store
historic information for all parts of requested subscription, but
not back to the requested timestamp.";
}
identity filter-unavailable {
base error;
description
"Referenced filter does not exist";
}
identity filter-type-unsupported {
base error;
description
"Publisher does not support filters constructed using this
filtering technology syntax.";
}
identity filter-unsupported {
base error;
description
"Failure can be from a syntax error, or a syntax too complex to be
processed by the platform. The supplemental info should include
the invalid part of the filter.";
}
identity namespace-unavailable {
base error;
description
"Referenced namespace doesn't exist or is unavailable
to the receiver.";
}
identity no-such-subscription {
base error;
description
"Referenced subscription doesn't exist. This may be as a result of
a non-existent subscription ID, an ID which belongs to another
subscriber, or an ID for acceptable subscription which has been
statically configured.";
}
identity insufficient-resources {
base error;
description
"The publisher has insufficient resources to support the
subscription as requested by an RPC.";
}
identity unsupportable-volume {
base error;
description
"The publisher cannot support the volume of information intended
to be sent for an existing subscription.";
}
identity error-no-such-option {
base error;
description
"A requested parameter setting is not supported.";
}
identity dscp-unavailable {
base sn:error;
description
"Requested DSCP marking not allocatable.";
}
identity qos-unsupported {
base sn:error;
description
"An included subscription QoS parameter or parameter value is not
supported by the publisher.";
}
/* Identities for encodings */
identity encodings {
description
"Base identity to represent data encodings";
}
identity encode-xml {
base encodings;
if-feature "encode-xml";
description
"Encode data using XML";
}
identity encode-json {
base encodings;
if-feature "encode-json";
description
"Encode data using JSON";
}
/* Identities for transports */
identity transport {
description
"An identity that represents a the underlying mechanism for
passing notification messages.";
}
identity netconf {
base transport;
description
"Netconf is used a transport for notification messages and state
change notifications.";
reference "draft-ietf-netconf-netconf-event-notifications";
}
identity http2 {
base transport;
description
"HTTP2 is used a transport for notification messages and state
change notifications.";
reference "draft-ietf-netconf-restconf-notif-03, Sections 3.1.1" +
"3.1.3";
}
identity http1.1 {
base transport;
description
"HTTP1.1 is used a transport for notification messages and state
change notifications.";
reference "draft-ietf-netconf-restconf-notif-03, Section 3.1.2";
}
/*
* TYPEDEFs
*/
typedef subscription-id {
type uint32;
description
"A type for subscription identifiers.";
}
typedef filter-id {
type string;
description
"A type to identify filters which can be associated with a
subscription.";
}
typedef subscription-result {
type identityref {
base subscription-result;
}
description
"The result of a subscription operation";
}
typedef subscription-errors {
type identityref {
base error;
}
description
"The reason for the failure of an RPC request or the sending
of a subscription suspension or termination state change
notification";
}
typedef encoding {
type identityref {
base encodings;
}
description
"Specifies a data encoding, e.g. for a data subscription.";
}
typedef transport {
type identityref {
base transport;
}
description
"Specifies protocol used to send notification messages to a
receiver.";
}
typedef stream-ref {
type leafref {
path "/sn:streams/sn:stream/sn:name";
}
description
"This type is used to reference a system-provided datastream.";
}
typedef stream-filter-ref {
type leafref {
path "/sn:filters/sn:stream-filter/sn:identifier";
}
description
"This type is used to reference a configured stream filter.";
}
/*
* GROUPINGS
*/
grouping stream-filter-elements {
description
"This grouping defines the base for filters applied to event
streams.";
choice filter-spec {
description
"The content filter specification for this request.";
anydata stream-subtree-filter {
if-feature "subtree";
description
"Event stream evaluation criteria encoded in the syntax of a
subtree filter as defined in RFC 6241, Section 6.
The subtree filter is applied to the representation of
individual, delineated event records as contained within the
event stream. For example, if the notification message
contains an instance of a notification defined in YANG, then
the top-level element is the name of the YANG notification.
If the subtree filter returns a non-empty node set, the filter
matches the event record, and the it is included in the
notification message sent to the receivers.";
reference "RFC 6241, Section 6.";
}
leaf stream-xpath-filter {
if-feature "xpath";
type yang:xpath1.0;
description
"Event stream evaluation criteria encoded in the syntax of
an XPath 1.0 expression.
The XPath expression is evaluated on the representation of
individual, delineated event records as contained within
the event stream. For example, if the notification message
contains an instance of a notification defined in YANG,
then the top-level element is the name of the YANG
notification, and the root node has this top-level element
as the only child.
The result of the XPath expression is converted to a
boolean value using the standard XPath 1.0 rules. If the
boolean value is 'true', the filter matches the the event
record, and the it is included in the notification message
sent to the receivers.
The expression is evaluated in the following XPath context:
o The set of namespace declarations are those in scope on
the 'xpath-filter' leaf element
o The set of variable bindings is empty.
o The function library is the core function library, and
the XPath functions defined in section 10 in RFC 7950.
o The context node is the root node.";
reference
"http://www.w3.org/TR/1999/REC-xpath-19991116
RFC 7950, Section 10.";
}
}
}
grouping update-qos {
description
"This grouping describes Quality of Service information
concerning a subscription. This information is passed to lower
layers for transport prioritization and treatment";
leaf dscp {
if-feature "qos";
type inet:dscp;
default "0";
description
"The push update's IP packet transport priority. This is made
visible across network hops to receiver. The transport
priority is shared for all receivers of a given subscription.";
}
leaf weighting {
if-feature "qos";
type uint8 {
range "0 .. 255";
}
description
"Relative weighting for a subscription. Allows an underlying
transport layer perform informed load balance allocations
between various subscriptions";
reference
"RFC-7540, section 5.3.2";
}
leaf dependency {
if-feature "qos";
type sn:subscription-id;
description
"Provides the Subscription ID of a parent subscription which
has absolute priority should that parent have push updates
ready to egress the publisher. In other words, there should be
no streaming of objects from the current subscription if
the parent has something ready to push.";
reference
"RFC-7540, section 5.3.1";
}
}
grouping subscription-policy-modifiable {
description
"This grouping describes all objects which may be changed
in a subscription via an RPC.";
choice target {
mandatory true;
description
"Identifies the source of information against which a
subscription is being applied, as well as specifics on the
subset of information desired from that source. This choice
exists so that additional filter types can be added via
augmentation.";
case stream {
choice stream-filter {
description
"An event stream filter can be applied to a subscription.
That filter will come either referenced from a global list,
or be provided within the subscription itself.";
case by-reference {
description
"Apply a filter that has been configured separately.";
leaf stream-filter-ref {
type stream-filter-ref;
mandatory true;
description
"References an existing stream-filter which is to
be applied to stream for the subscription.";
}
}
case within-subscription {
description
"Local definition allows a filter to have the same
lifecycle as the subscription.";
uses stream-filter-elements;
}
}
}
}
leaf stop-time {
type yang:date-and-time;
description
"Identifies a time after which notification messages for a
subscription should not be sent. If stop-time is not present,
the notification messages will continue until the subscription
is terminated. If replay-start-time exists, stop-time must be
for a subsequent time. If replay-start-time doesn't exist,
stop-time must be for a future time.";
}
}
grouping subscription-policy-dynamic {
description
"This grouping describes information concerning a subscription
which can be passed over the RPCs defined in this model.";
leaf encoding {
type encoding;
mandatory true;
description
"The type of encoding for the subscribed data.";
}
uses subscription-policy-modifiable {
augment target/stream {
description
"Adds additional objects which must be set just by RPC.";
leaf stream {
type stream-ref {
require-instance false;
}
description
"Indicates a stream of event records against which to apply
a stream filter. Require-instance is false in case a
configured subscription reference a stream which is
dynamically generated and only available at runtime.";
}
leaf replay-start-time {
if-feature "replay";
type yang:date-and-time;
description
"Used to trigger the replay feature and indicate that the
replay should start at the time specified. If
replay-start-time is not present, this is not a replay
subscription and event record push should start immediately.
It is never valid to specify start times that are later than
or equal to the current time.";
}
}
}
uses update-qos;
}
grouping subscription-policy {
description
"This grouping describes the full set of policy information
concerning both dynamic and configured subscriptions, except for
configured receivers.";
leaf protocol {
if-feature "configured";
type transport;
mandatory true;
description
"This leaf specifies the transport protocol used to deliver
messages destined to all receivers of a subscription.";
}
uses subscription-policy-dynamic;
}
grouping notification-origin-info {
description
"Defines the sender source from which notification messages for a
configured subscription are sent.";
choice notification-message-origin {
description
"Identifies the egress interface on the Publisher from which
notification messages are to be sent.";
case interface-originated {
description
"When notification messages to egress a specific, designated
interface on the Publisher.";
leaf source-interface {
type if:interface-ref;
description
"References the interface for notification messages.";
}
}
case address-originated {
description
"When notification messages are to depart from a publisher
using specfic originating address and/or routing context
information.";
leaf source-vrf {
if-feature "supports-vrf";
type leafref {
path "/ni:network-instances/ni:network-instance/ni:name";
}
description
"VRF from which notification messages should egress a
publisher.";
}
leaf source-address {
type inet:ip-address-no-zone;
description
"The source address for the notification messages. If a
source VRF exists, but this object doesn't, a publisher's
default address for that VRF must be used.";
}
}
}
}
grouping receiver-info {
description
"Defines where and how to get notification messages for a
configured subscriptions to one or more targeted recipient. This
includes specifying the destination addressing as well as a
transport protocol acceptable to the receiver.";
container receivers {
description
"Set of receivers in a subscription.";
list receiver {
key "address port";
min-elements 1;
description
"A single host or multipoint address intended as a target
for the notification messages of a subscription.";
leaf address {
type inet:host;
description
"Specifies the address for the traffic to reach a remote
host. One of the following must be specified: an ipv4
address, an ipv6 address, or a host name.";
}
leaf port {
type inet:port-number;
description
"This leaf specifies the port number to use for messages
destined for a receiver.";
}
}
}
}
grouping error-identifier {
description
"A code passed back within an RPC response to describe why the RFC
has failed, or within a state change notification to describe why
the change has occurred.";
leaf error-id {
type subscription-errors;
mandatory true;
description
"Identifies the subscription error condition.";
}
}
grouping hints {
description
"Objects passed back within an RPC response to describe why the
RFC has failed, or within a state change notification to
describe why the change has occurred.";
leaf filter-failure {
type string;
description
"Information describing where and/or why a provided filter was
unsupportable for a subscription.";
}
}
grouping subscription-response-with-hints {
description
"Defines the output for the establish-subscription and
modify-subscription RPCs.";
leaf subscription-result {
type subscription-result;
mandatory true;
description
"Indicates whether subscription is operational, or if a problem
was encountered.";
}
choice result {
description
"Depending on the subscription result, different data is
returned.";
case no-success {
description
"This case applies when a subscription request was not
successful and no subscription was created (or modified) as a
result. In this case, information MAY be returned that
indicates suggested parameter settings that would have a
high likelihood of succeeding in a subsequent establish-
subscription or modify-subscription request.";
uses hints;
}
}
}
/*
* RPCs
*/
rpc establish-subscription {
description
"This RPC allows a subscriber to create (and possibly negotiate)
a subscription on its own behalf. If successful, the
subscription remains in effect for the duration of the
subscriber's association with the publisher, or until the
subscription is terminated. In case an error (as indicated by
subscription-result) is returned, the subscription is not
created. In that case, the RPC reply MAY include suggested
parameter settings that would have a higher likelihood of
succeeding in a subsequent establish-subscription request.";
input {
uses subscription-policy-dynamic {
refine "encoding" {
mandatory false;
description
"The type of encoding for the subscribed data. If not
included as part of the RPC, the encoding MUST be set by the
publisher to be the encoding used by this RPC.";
}
}
}
output {
uses subscription-response-with-hints {
augment "result" {
description
"Allows information to be passed back as part of a
successful subscription establishment.";
case success {
description
"This case is used when the subscription request was
successful.";
leaf identifier {
type subscription-id;
mandatory true;
description
"Identifier used for this subscription.";
}
}
}
augment "result/no-success" {
description
"Contains establish RPC specific objects which can be
returned as hints for future attempts.";
leaf replay-start-time-hint {
type yang:date-and-time;
description
"If a replay has been requested, but the requested replay
time cannot be honored, this may provide a hint at an
alternate time which may be supportable.";
}
}
}
}
}
rpc modify-subscription {
description
"This RPC allows a subscriber to modify a subscription that was
previously created using establish-subscription. If successful,
the changed subscription remains in effect for the duration of
the subscriber's association with the publisher, or until the
subscription is again modified or terminated. In case an error
is returned (as indicated by subscription-result), the
subscription is not modified and the original subscription
parameters remain in effect. In that case, the rpc error
response MAY include suggested parameter hints that would have
a high likelihood of succeeding in a subsequent
modify-subscription request. A successful modifiy-subscription
will return a suspended subscription to an active state.";
input {
leaf identifier {
type subscription-id;
description
"Identifier to use for this subscription.";
}
uses subscription-policy-modifiable;
}
output {
uses subscription-response-with-hints;
}
}
rpc delete-subscription {
description
"This RPC allows a subscriber to delete a subscription that
was previously created from by that same subscriber using the
establish-subscription RPC.";
input {
leaf identifier {
type subscription-id;
mandatory true;
description
"Identifier of the subscription that is to be deleted.
Only subscriptions that were created using
establish-subscription can be deleted via this RPC.";
}
}
output {
leaf subscription-result {
type subscription-result;
mandatory true;
description
"Indicates whether subscription has been deleted, or if a
problem was encountered.";
}
}
}
rpc kill-subscription {
description
"This RPC allows an operator to delete a dynamic subscription
without restrictions on the originating subscriber or underlying
transport session.";
input {
leaf identifier {
type subscription-id;
mandatory true;
description
"Identifier of the subscription that is to be deleted. Only
subscriptions that were created using establish-subscription
can be deleted via this RPC.";
}
}
output {
leaf subscription-result {
type subscription-result;
mandatory true;
description
"Indicates whether subscription has been killed, or if a
problem was encountered.";
}
}
}
/*
* NOTIFICATIONS
*/
notification replay-completed {
sn:subscription-state-notification;
if-feature "replay";
description
"This notification is sent to indicate that all of the replay
notifications have been sent. It must not be sent for any other
reason.";
leaf identifier {
type subscription-id;
mandatory true;
description
"This references the affected subscription.";
}
}
notification subscription-completed {
sn:subscription-state-notification;
description
"This notification is sent to indicate that a subscription has
finished passing event records.";
leaf identifier {
type subscription-id;
mandatory true;
description
"This references the gracefully completed subscription.";
}
}
notification subscription-started {
sn:subscription-state-notification;
if-feature "configured";
description
"This notification indicates that a subscription has started and
notifications are beginning to be sent. This notification shall
only be sent to receivers of a subscription; it does not
constitute a general-purpose notification.";
leaf identifier {
type subscription-id;
mandatory true;
description
"This references the affected subscription.";
}
uses subscription-policy {
refine "target/stream/replay-start-time" {
description
"Indicates the time that a replay using for the streaming of
buffered event records. This will be populated with the most
recent of the following: replay-log-creation-time,
replay-log-aged-time, replay-start-time, or the most recent
publisher boot time.";
}
refine "target/stream/stream-filter/within-subscription" {
description
"Filter applied to the subscription. If the
'stream-filter-ref' is populated, the filter within the
subscription came from the 'filters' container. Otherwise it
is populated in-line as part of the subscription.";
}
}
}
notification subscription-resumed {
sn:subscription-state-notification;
description
"This notification indicates that a subscription that had
previously been suspended has resumed. Notifications will once
again be sent. In addition, a subscription-resumed indicates
that no modification of parameters has occured since the last
time event records have been sent.";
leaf identifier {
type subscription-id;
mandatory true;
description
"This references the affected subscription.";
}
}
notification subscription-modified {
sn:subscription-state-notification;
description
"This notification indicates that a subscription has been
modified. Notification messages sent from this point on will
conform to the modified terms of the subscription. For
completeness, this state change notification includes both
modified and non-modified aspects of a subscription.";
leaf identifier {
type subscription-id;
mandatory true;
description
"This references the affected subscription.";
}
uses subscription-policy {
refine "target/stream/stream-filter/within-subscription" {
description
"Filter applied to the subscription. If the
'stream-filter-ref' is populated, the filter within the
subscription came from the 'filters' container. Otherwise it
is populated in-line as part of the subscription.";
}
}
}
notification subscription-terminated {
sn:subscription-state-notification;
description
"This notification indicates that a subscription has been
terminated.";
leaf identifier {
type subscription-id;
mandatory true;
description
"This references the affected subscription.";
}
uses error-identifier;
uses hints;
}
notification subscription-suspended {
sn:subscription-state-notification;
description
"This notification indicates that a suspension of the
subscription by the publisher has occurred. No further
notifications will be sent until the subscription resumes.
This notification shall only be sent to receivers of a
subscription; it does not constitute a general-purpose
notification.";
leaf identifier {
type subscription-id;
mandatory true;
description
"This references the affected subscription.";
}
uses error-identifier;
uses hints;
}
/*
* DATA NODES
*/
container streams {
description
"This container contains information on the built-in streams
provided by the publisher.";
list stream {
key "name";
description
"Identifies the built-in streams that are supported by the
publisher.";
leaf name {
type string;
description
"A handle for a system-provided datastream made up of a
sequential set of event records, each of which is
characterized by its own domain and semantics.";
}
leaf description {
type string;
mandatory true;
description
"A description of the event stream, including such information
as the type of event records that are available within this
stream.";
}
leaf replay-support {
if-feature "replay";
type empty;
description
"Indicates that event record replay is available on this
stream.";
}
leaf replay-log-creation-time {
if-feature "replay";
type yang:date-and-time;
description
"The timestamp of the creation of the log used to support the
replay function on this stream. Note that this might be
earlier then the earliest available information contained in
the log. This object is updated if the log resets for some
reason. This object MUST be present if replay is supported.";
}
leaf replay-log-aged-time {
if-feature "replay";
type yang:date-and-time;
description
"The timestamp of the last event record aged out of the log.
This object MUST be present if replay is supported and any
event record have been aged out of the log.";
}
}
}
container filters {
description
"This container contains a list of configurable filters
that can be applied to subscriptions. This facilitates
the reuse of complex filters once defined.";
list stream-filter {
key "identifier";
description
"A list of pre-positioned filters that can be applied to
subscriptions.";
leaf identifier {
type filter-id;
description
"An identifier to differentiate between filters.";
}
uses stream-filter-elements;
}
}
container subscription-config {
if-feature "configured";
description
"Contains the list of subscriptions that are configured,
as opposed to established via RPC or other means.";
list subscription {
key "identifier";
description
"The identity and specific parameters of a configured
subscription.";
leaf identifier {
type subscription-id;
description
"Identifier to use for this subscription. Should only
use the bottom half of the identifier's integer range.";
}
leaf purpose {
type string;
description
"Open text allowing a configuring entity to embed the
originator or other specifics of this subscription.";
}
uses subscription-policy;
uses notification-origin-info;
uses receiver-info;
}
}
container subscriptions {
config false;
description
"Contains the list of currently active subscriptions, i.e.
subscriptions that are currently in effect, used for subscription
management and monitoring purposes. This includes subscriptions
that have been setup via RPC primitives as well as subscriptions
that have been established via configuration.";
list subscription {
key "identifier";
description
"The identity and specific parameterst of a subscription.
Subscriptions within this list can be created using a control
channel or RPC, or be established through configuration.";
leaf identifier {
type subscription-id;
description
"Identifier of a subscription; unique within a publisher";
}
leaf configured-subscription-state {
if-feature "configured";
type enumeration {
enum valid {
value 1;
description
"Connection is active and healthy.";
}
enum invalid {
value 2;
description
"The subscription as as whole is unsupportable with its
current parameters.";
}
enum concluded {
value 3;
description
"A subscription is inactive as it has hit a stop time,
but not yet been removed from configuration.";
}
}
description
"The presence of this leaf indicates that the subscription
originated from configuration, not through a control channel
or RPC. The value indicates the system established status
of the subscription.";
}
leaf purpose {
if-feature "configured";
type string;
description
"Open text allowing a configuring entity to embed the
originator or other specifics of this subscription.";
}
uses subscription-policy;
uses notification-origin-info {
if-feature "configured";
}
uses receiver-info {
augment receivers/receiver {
description
"include operational data for receivers.";
leaf pushed-notifications {
type yang:counter64;
description
"Operational data which provides the number of update
notification messages pushed to a receiver.";
}
leaf excluded-notifications {
type yang:counter64;
description
"Operational data which provides the number of event
records from a stream explicitly removed via filtering so
that they are not sent to a receiver.";
}
leaf status {
type enumeration {
enum active {
value 1;
description
"Receiver is currently being sent any applicable
notification messages for the subscription.";
}
enum suspended {
value 2;
description
"Receiver status is suspended, so the publisher
is currently unable to provide notification messages
for the subscription.";
}
enum connecting {
value 3;
if-feature "configured";
description
"A subscription has been configured, but a
subscription-started state change notification needs
to be successfully received before notification
messages are sent.";
}
enum timeout {
value 4;
if-feature "configured";
description
"A subscription has failed in sending a subscription
started state change to the receiver.
Additional attempts at connection attempts are not
currently being made.";
}
}
mandatory true;
description
"Specifies the status of a subscription from the
perspective of a particular receiver. With this info it
is possible to determine whether a subscriber is currently
generating notification messages intended for that
receiver.";
}
action reset {
description
"Allows the reset of this configured subscription receiver
to the 'connecting' state. This enables the
connection process to be reinitiated.";
output {
leaf time {
type yang:date-and-time;
mandatory true;
description
"Time a publisher returned the receiver to a
connecting status.";
}
}
}
}
}
}
}
}
<CODE ENDS>
For a deployment including both configured and dynamic subscriptions, split subscription identifiers into static and dynamic halves. That way it is unlikely there will be collisions if the configured subscriptions attempt to set a subscription-id which might have already been dynamically allocated. The lower half the "identifier" object in the subscriptions container SHOULD be used when the "identifier" is selected and assigned by an external entity (such as with a configured subscription). And the upper half SHOULD be used for subscription identifiers dynamically chosen and assigned by the publisher
Neither state change notification nor subscribed event records within notification messages may be sent before the transport layer, including any required capabilities exchange, has been established.
An implementation may choose to transition between active and suspended subscription states more frequently than required by this specification. However if a subscription is unable to marshal all intended updates into a transmittable message in multiple successive intervals, the subscription SHOULD be suspended with the reason "unsupportable-volume".
For configured subscriptions, operations are against the set of receivers using the subscription identifier as a handle for that set. But for streaming up dates, state change notifications are local to a receiver. In this specification it is the case that receivers get no information from the publisher about the existence of other receivers. But if an operator wants to let the receivers correlate results, it is useful to use the subscription identifier handle across the receivers to allow that correlation.
This document registers the following namespace URI in the "IETF XML Registry" [RFC3688]:
URI: urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications
Registrant Contact: The IESG.
XML: N/A; the requested URI is an XML namespace.
This document registers the following YANG module in the "YANG Module Names" registry [RFC6020]:
Name: ietf-subscribed-notifications
Namespace: urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications
Prefix: sn
Reference: draft-ietf-netconf-ietf-subscribed-notifications-08.txt (RFC form)
For dynamic subscriptions the publisher MUST authenticate and authorize all RPC requests.
Subscriptions could overload a publisher's CPU. For this reason, the publisher MUST have the ability to decline a dynamic subscription request, and provide the appropriate RPC error response to a subscriber should the proposed subscription overly deplete the publisher's resources.
A publisher needs to be able to suspend an existing dynamic or configured subscription based on capacity constraints. When this occurs, the subscription status MUST be updated accordingly and the receivers notified with subscription state notifications.
If a malicious or buggy subscriber sends an unexpectedly large number of RPCs, the result might be an excessive use of system resources. In such a situation, subscription interactions MAY be terminated by terminating the transport session.
For both configured and dynamic subscriptions the publisher MUST authenticate and authorize a receiver via some transport level mechanism before sending any updates.
A secure transport is highly recommended and the publisher MUST ensure that the receiver has sufficient authorization to perform the function they are requesting against the specific subset of content involved.
A publisher MUST NOT include any content in a notification message for which the receiver has not been authorized.
With configured subscriptions, one or more publishers could be used to overwhelm a receiver. No notification messages SHOULD be sent to any receiver which doesn't even support subscriptions. Receivers that do not want notification messages need only terminate or refuse any transport sessions from the publisher.
The NETCONF Authorization Control Model [RFC6536bis] SHOULD be used to control and restrict authorization of subscription configuration. This control models permits specifying per-receiver permissions to receive event records from specific streams.
Where NACM is available, the NACM "very-secure" tag MUST be placed on the "kill-subscription" RPC so that only administrators have access to use this.
One subscription id can be used for two or more receivers of the same configured subscription. But due to the possibility of different access control permissions per receiver, it SHOULD NOT be assumed that each receiver is getting identical updates.
For their valuable comments, discussions, and feedback, we wish to acknowledge Andy Bierman, Tim Jenkins, Martin Bjorklund, Kent Watsen, Balazs Lengyel, Robert Wilton, Sharon Chisholm, Hector Trevino, Susan Hares, Michael Scharf, and Guangying Zheng.
| [I-D.draft-ietf-rtgwg-ni-model] | Berger, L., Hopps, C. and A. Lindem, "YANG Network Instances", Internet-Draft draft-ietf-rtgwg-ni-model-03, July 2017. |
| [RFC2119] | Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997. |
| [RFC3688] | Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004. |
| [RFC5277] | Chisholm, S. and H. Trevino, "NETCONF Event Notifications", RFC 5277, DOI 10.17487/RFC5277, July 2008. |
| [RFC6020] | Bjorklund, M., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, October 2010. |
| [RFC6536bis] | Bierman, A. and M. Bjorklund, "Network Configuration Protocol (NETCONF) Access Control Model", Internet-Draft draft-ietf-netconf-rfc6536bis-01, September 2017. |
| [RFC7540] | Belshe, M., Peon, R. and M. Thomson, "Hypertext Transfer Protocol Version 2 (HTTP/2)", RFC 7540, DOI 10.17487/RFC7540, May 2015. |
| [RFC7950] | Bjorklund, M., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, August 2016. |
| [XPATH] | Clark, J. and S. DeRose, "XML Path Language (XPath) Version 1.0", November 1999. |
(To be removed by RFC editor prior to publication)
v07 - v08
v06 - v07
v05 - v06
v04 - v05
v03 - v04
v03 - v04
v02 - v03
v01 - v02
v00 - v01
v01 5277bis - v00 subscribed notifications
v00 - v01 of 5277bis