| NETCONF Working Group | K. Watsen |
| Internet-Draft | Watsen Networks |
| Intended status: Standards Track | G. Wu |
| Expires: September 10, 2019 | Cisco Systems |
| L. Xia | |
| Huawei | |
| March 9, 2019 |
YANG Groupings for TLS Clients and TLS Servers
draft-ietf-netconf-tls-client-server-10
This document defines three YANG modules: the first defines groupings for a generic TLS client, the second defines groupings for a generic TLS server, and the third defines common identities and groupings used by both the client and the server. It is intended that these groupings will be used by applications using the TLS protocol.
This draft contains many placeholder values that need to be replaced with finalized values at the time of publication. This note summarizes all of the substitutions that are needed. No other RFC Editor instructions are specified elsewhere in this document.
This document contains references to other drafts in progress, both in the Normative References section, as well as in body text throughout. Please update the following references to reflect their final RFC assignments:
Artwork in this document contains shorthand references to drafts in progress. Please apply the following replacements:
Artwork in this document contains placeholder values for the date of publication of this draft. Please apply the following replacement:
The following Appendix section is to be removed prior to publication:
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on September 10, 2019.
Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
This document defines three YANG 1.1 [RFC7950] modules: the first defines a grouping for a generic TLS client, the second defines a grouping for a generic TLS server, and the third defines identities and groupings common to both the client and the server (TLS is defined in [RFC5246]). It is intended that these groupings will be used by applications using the TLS protocol. For instance, these groupings could be used to help define the data model for an HTTPS [RFC2818] server or a NETCONF over TLS [RFC7589] based server.
The client and server YANG modules in this document each define one grouping, which is focused on just TLS-specific configuration, and specifically avoids any transport-level configuration, such as what ports to listen-on or connect-to. This affords applications the opportunity to define their own strategy for how the underlying TCP connection is established. For instance, applications supporting NETCONF Call Home [RFC8071] could use the "ssh-server-grouping" grouping for the TLS parts it provides, while adding data nodes for the TCP-level call-home configuration.
The modules defined in this document use groupings defined in [I-D.ietf-netconf-keystore] enabling keys to be either locally defined or a reference to globally configured values.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
This section provides a tree diagram [RFC8340] for the "ietf-tls-client" module that does not have groupings expanded.
module: ietf-tls-client
grouping tls-client-grouping
+---u client-identity-grouping
+---u server-auth-grouping
+---u hello-params-grouping
+---u keepalives-grouping
grouping client-identity-grouping
+-- tls-client-identity
+-- (auth-type)?
+--:(certificate)
+-- certificate
+---u client-identity-grouping
grouping server-auth-grouping
+-- tls-server-auth
+-- pinned-ca-certs? ta:pinned-certificates-ref
| {ta:x509-certificates}?
+-- pinned-server-certs? ta:pinned-certificates-ref
{ta:x509-certificates}?
grouping hello-params-grouping
+-- tls-hello-params {tls-client-hello-params-config}?
+---u hello-params-grouping
grouping keepalives-grouping
+-- tls-keepalives {tls-client-keepalives}?
+-- max-wait? uint16
+-- max-attempts? uint8
This section presents two examples showing the tls-client-grouping populated with some data. These examples are effectively the same except the first configures the client identity using a local key while the second uses a key configured in a keystore. Both examples are consistent with the examples presented in Section 3 of [I-D.ietf-netconf-trust-anchors] and Section 3.2 of [I-D.ietf-netconf-keystore].
========== NOTE: '\\' line wrapping per BCP XX (RFC XXXX) ===========
<tls-client xmlns="urn:ietf:params:xml:ns:yang:ietf-tls-client">
<!-- how this client will authenticate itself to the server -->
<tls-client-identity>
<certificate>
<local-definition>
<algorithm xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto\
\-types">ct:rsa2048</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
<cert>base64encodedvalue==</cert>
</local-definition>
</certificate>
</tls-client-identity>
<!-- which certificates will this client trust -->
<tls-server-auth>
<pinned-ca-certs>explicitly-trusted-server-ca-certs</pinned-ca-c\
\erts>
<pinned-server-certs>explicitly-trusted-server-certs</pinned-ser\
\ver-certs>
</tls-server-auth>
<tls-keepalives>
<max-wait>30</max-wait>
<max-attempts>3</max-attempts>
</tls-keepalives>
</tls-client>
The following example configures the client identity using a local key:
========== NOTE: '\\' line wrapping per BCP XX (RFC XXXX) ===========
<tls-client xmlns="urn:ietf:params:xml:ns:yang:ietf-tls-client">
<!-- how this client will authenticate itself to the server -->
<tls-client-identity>
<certificate>
<keystore-reference>ex-rsa-cert</keystore-reference>
</certificate>
</tls-client-identity>
<!-- which certificates will this client trust -->
<tls-server-auth>
<pinned-ca-certs>explicitly-trusted-server-ca-certs</pinned-ca-c\
\erts>
<pinned-server-certs>explicitly-trusted-server-certs</pinned-ser\
\ver-certs>
</tls-server-auth>
<tls-keepalives>
<max-wait>30</max-wait>
<max-attempts>3</max-attempts>
</tls-keepalives>
</tls-client>
The following example configures the client identity using a key from the keystore:
This YANG module has normative references to [I-D.ietf-netconf-trust-anchors] and [I-D.ietf-netconf-keystore].
<CODE BEGINS> file "ietf-tls-client@2019-03-09.yang"
module ietf-tls-client {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-tls-client";
prefix tlsc;
import ietf-tls-common {
prefix tlscmn;
revision-date 2019-03-09; // stable grouping definitions
reference
"RFC XXXX: YANG Groupings for TLS Clients and TLS Servers";
}
import ietf-trust-anchors {
prefix ta;
reference
"RFC YYYY: YANG Data Model for Global Trust Anchors";
}
import ietf-keystore {
prefix ks;
reference
"RFC ZZZZ: YANG Data Model for a 'Keystore' Mechanism";
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web: <http://datatracker.ietf.org/wg/netconf/>
WG List: <mailto:netconf@ietf.org>
Author: Kent Watsen <mailto:kent+ietf@watsen.net>
Author: Gary Wu <mailto:garywu@cisco.com>";
description
"This module defines reusable groupings for TLS clients that
can be used as a basis for specific TLS client instances.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 [RFC2119]
[RFC8174] when, and only when, they appear in all
capitals, as shown here.
Copyright (c) 2019 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2019-03-09 {
description
"Initial version";
reference
"RFC XXXX: YANG Groupings for TLS Clients and TLS Servers";
}
// Features
feature tls-client-hello-params-config {
description
"TLS hello message parameters are configurable on a TLS
client.";
}
feature tls-client-keepalives {
description
"Per socket TLS keepalive parameters are configurable for
TLS clients on the server implementing this feature.";
}
// Groupings
grouping tls-client-grouping {
description
"A reusable grouping for configuring a TLS client without
any consideration for how an underlying TCP session is
established.";
uses client-identity-grouping;
uses server-auth-grouping;
uses hello-params-grouping;
uses keepalives-grouping;
}
grouping client-identity-grouping {
description
"A reusable grouping for configuring a TLS client identity.";
container tls-client-identity {
description
"The credentials used by the client to authenticate to
the TLS server.";
choice auth-type {
description
"The authentication type.";
container certificate {
uses
ks:local-or-keystore-end-entity-cert-with-key-grouping;
description
"A locally-defined or referenced certificate
to be used for client authentication.";
reference
"RFC ZZZZ: YANG Data Model for a 'Keystore' Mechanism";
}
}
}
}
grouping server-auth-grouping {
description
"A reusable grouping for configuring TLS server
authentication.";
container tls-server-auth {
must 'pinned-ca-certs or pinned-server-certs';
description
"Trusted server identities.";
leaf pinned-ca-certs {
if-feature "ta:x509-certificates";
type ta:pinned-certificates-ref;
description
"A reference to a list of certificate authority (CA)
certificates used by the TLS client to authenticate
TLS server certificates. A server certificate is
authenticated if it has a valid chain of trust to
a configured pinned CA certificate.";
}
leaf pinned-server-certs {
if-feature "ta:x509-certificates";
type ta:pinned-certificates-ref;
description
"A reference to a list of server certificates used by
the TLS client to authenticate TLS server certificates.
A server certificate is authenticated if it is an
exact match to a configured pinned server certificate.";
}
}
}
grouping hello-params-grouping {
description
"A reusable grouping for configuring a TLS transport
parameters.";
container tls-hello-params {
if-feature "tls-client-hello-params-config";
uses tlscmn:hello-params-grouping;
description
"Configurable parameters for the TLS hello message.";
}
}
grouping keepalives-grouping {
description
"A reusable grouping for configuring TLS client keepalive
parameters.";
container tls-keepalives {
if-feature "tls-client-keepalives";
description
"Configures the keep-alive policy, to proactively test
the aliveness of the TLS server. An unresponsive
TLS server is dropped after approximately max-wait
* max-attempts seconds.";
leaf max-wait {
type uint16 {
range "1..max";
}
units "seconds";
default "30";
description
"Sets the amount of time in seconds after which if no data
has been received from the TLS server, a TLS-level message
will be sent to test the aliveness of the TLS server.";
}
leaf max-attempts {
type uint8;
default "3";
description
"Sets the maximum number of sequential keep-alive messages
that can fail to obtain a response from the TLS server
before assuming the TLS server is no longer alive.";
}
}
}
}
<CODE ENDS>
This section provides a tree diagram [RFC8340] for the "ietf-tls-server" module that does not have groupings expanded.
module: ietf-tls-server
grouping tls-server-grouping
+---u server-identity-grouping
+---u client-auth-grouping
+---u hello-params-grouping
+---u keepalives-grouping
grouping server-identity-grouping
+-- tls-server-identity
+---u server-identity-grouping
grouping client-auth-grouping
+-- tls-client-auth
+-- pinned-ca-certs? ta:pinned-certificates-ref
| {ta:x509-certificates}?
+-- pinned-client-certs? ta:pinned-certificates-ref
{ta:x509-certificates}?
grouping hello-params-grouping
+-- tls-hello-params {tls-server-hello-params-config}?
+---u hello-params-grouping
grouping keepalives-grouping
+-- tls-keepalives {tls-server-keepalives}?
+-- max-wait? uint16
+-- max-attempts? uint8
This section presents two examples showing the tls-server-grouping populated with some data. These examples are effectively the same except the first configures the server identity using a local key while the second uses a key configured in a keystore. Both examples are consistent with the examples presented in Section 3 of [I-D.ietf-netconf-trust-anchors] and Section 3.2 of [I-D.ietf-netconf-keystore].
========== NOTE: '\\' line wrapping per BCP XX (RFC XXXX) ===========
<tls-server xmlns="urn:ietf:params:xml:ns:yang:ietf-tls-server">
<!-- how this server will authenticate itself to the client -->
<tls-server-identity>
<local-definition>
<algorithm xmlns:ct="urn:ietf:params:xml:ns:yang:ietf-crypto-t\
\ypes">ct:rsa2048</algorithm>
<private-key>base64encodedvalue==</private-key>
<public-key>base64encodedvalue==</public-key>
<cert>base64encodedvalue==</cert>
</local-definition>
</tls-server-identity>
<!-- which certificates will this server trust -->
<tls-client-auth>
<pinned-ca-certs>explicitly-trusted-client-ca-certs</pinned-ca-c\
\erts>
<pinned-client-certs>explicitly-trusted-client-certs</pinned-cli\
\ent-certs>
</tls-client-auth>
</tls-server>
The following example configures the server identity using a local key:
========== NOTE: '\\' line wrapping per BCP XX (RFC XXXX) ===========
<tls-server xmlns="urn:ietf:params:xml:ns:yang:ietf-tls-server">
<!-- how this server will authenticate itself to the client -->
<tls-server-identity>
<keystore-reference>ex-rsa-cert</keystore-reference>
</tls-server-identity>
<!-- which certificates will this server trust -->
<tls-client-auth>
<pinned-ca-certs>explicitly-trusted-client-ca-certs</pinned-ca-c\
\erts>
<pinned-client-certs>explicitly-trusted-client-certs</pinned-cli\
\ent-certs>
</tls-client-auth>
</tls-server>
The following example configures the server identity using a key from the keystore:
This YANG module has a normative references to [RFC5246], [I-D.ietf-netconf-trust-anchors] and [I-D.ietf-netconf-keystore].
<CODE BEGINS> file "ietf-tls-server@2019-03-09.yang"
module ietf-tls-server {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-tls-server";
prefix tlss;
import ietf-tls-common {
prefix tlscmn;
revision-date 2019-03-09; // stable grouping definitions
reference
"RFC XXXX: YANG Groupings for TLS Clients and TLS Servers";
}
import ietf-trust-anchors {
prefix ta;
reference
"RFC YYYY: YANG Data Model for Global Trust Anchors";
}
import ietf-keystore {
prefix ks;
reference
"RFC ZZZZ: YANG Data Model for a 'Keystore' Mechanism";
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web: <http://datatracker.ietf.org/wg/netconf/>
WG List: <mailto:netconf@ietf.org>
Author: Kent Watsen <mailto:kent+ietf@watsen.net>
Author: Gary Wu <mailto:garywu@cisco.com>";
description
"This module defines reusable groupings for TLS servers that
can be used as a basis for specific TLS server instances.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 [RFC2119]
[RFC8174] when, and only when, they appear in all
capitals, as shown here.
Copyright (c) 2019 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2019-03-09 {
description
"Initial version";
reference
"RFC XXXX: YANG Groupings for TLS Clients and TLS Servers";
}
// Features
feature tls-server-hello-params-config {
description
"TLS hello message parameters are configurable on a TLS
server.";
}
feature tls-server-keepalives {
description
"Per socket TLS keepalive parameters are configurable for
TLS servers on the server implementing this feature.";
}
// Groupings
grouping tls-server-grouping {
description
"A reusable grouping for configuring a TLS server without
any consideration for how underlying TCP sessions are
established.";
uses server-identity-grouping;
uses client-auth-grouping;
uses hello-params-grouping;
uses keepalives-grouping;
}
grouping server-identity-grouping {
description
"A reusable grouping for configuring a TLS server identity.";
container tls-server-identity {
description
"A locally-defined or referenced end-entity certificate,
including any configured intermediate certificates, the
TLS server will present when establishing a TLS connection
in its Certificate message, as defined in Section 7.4.2
in RFC 5246.";
reference
"RFC 5246:
The Transport Layer Security (TLS) Protocol Version 1.2
RFC ZZZZ:
YANG Data Model for a 'Keystore' Mechanism";
uses ks:local-or-keystore-end-entity-cert-with-key-grouping;
}
}
grouping client-auth-grouping {
description
"A reusable grouping for configuring a TLS client
authentication.";
container tls-client-auth {
description
"A reference to a list of pinned certificate authority (CA)
certificates and a reference to a list of pinned client
certificates.";
leaf pinned-ca-certs {
if-feature "ta:x509-certificates";
type ta:pinned-certificates-ref;
description
"A reference to a list of certificate authority (CA)
certificates used by the TLS server to authenticate
TLS client certificates. A client certificate is
authenticated if it has a valid chain of trust to
a configured pinned CA certificate.";
reference
"RFC YYYY: YANG Data Model for Global Trust Anchors";
}
leaf pinned-client-certs {
if-feature "ta:x509-certificates";
type ta:pinned-certificates-ref;
description
"A reference to a list of client certificates used by
the TLS server to authenticate TLS client certificates.
A clients certificate is authenticated if it is an
exact match to a configured pinned client certificate.";
reference
"RFC YYYY: YANG Data Model for Global Trust Anchors";
}
}
}
grouping hello-params-grouping {
description
"A reusable grouping for configuring a TLS transport
parameters.";
container tls-hello-params {
if-feature "tls-server-hello-params-config";
uses tlscmn:hello-params-grouping;
description
"Configurable parameters for the TLS hello message.";
}
}
grouping keepalives-grouping {
description
"A reusable grouping for configuring TLS server keepalive
parameters.";
container tls-keepalives {
if-feature "tls-server-keepalives";
description
"Configures the keep-alive policy, to proactively test
the aliveness of the TLS client. An unresponsive
TLS client is dropped after approximately max-wait
* max-attempts seconds.";
leaf max-wait {
type uint16 {
range "1..max";
}
units "seconds";
default "30";
description
"Sets the amount of time in seconds after which if no data
has been received from the TLS client, a TLS-level message
will be sent to test the aliveness of the TLS client.";
}
leaf max-attempts {
type uint8;
default "3";
description
"Sets the maximum number of sequential keep-alive messages
that can fail to obtain a response from the TLS client
before assuming the TLS client is no longer alive.";
}
}
}
}
<CODE ENDS>
The TLS common model presented in this section contains identities and groupings common to both TLS clients and TLS servers. The hello-params-grouping can be used to configure the list of TLS algorithms permitted by the TLS client or TLS server. The lists of algorithms are ordered such that, if multiple algorithms are permitted by the client, the algorithm that appears first in its list that is also permitted by the server is used for the TLS transport layer connection. The ability to restrict the algorithms allowed is provided in this grouping for TLS clients and TLS servers that are capable of doing so and may serve to make TLS clients and TLS servers compliant with local security policies. This model supports both TLS1.2 [RFC5246] and TLS 1.3 [RFC8446].
TLS 1.2 and TLS 1.3 have different ways defining their own supported cryptographic algorithms, see TLS and DTLS IANA registries page (https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml):
Thus, in order to support both TLS1.2 and TLS1.3, the cipher-suites part of the hello-params-grouping should include three parameters for configuring its permitted TLS algorithms, which are: TLS Cipher Suites, TLS SignatureScheme, TLS Supported Groups. Note that TLS1.2 only uses TLS Cipher Suites.
+-----------------------------------------------+---------+ | ciper-suites in hello-params-grouping | HASH | +-----------------------------------------------+---------+ | TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 | sha-256 | | TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 | sha-384 | | TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 | sha-256 | | TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 | sha-384 | | TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 | sha-256 | | TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 | sha-384 | | TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 | sha-256 | | TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 | sha-384 | | TLS_DHE_RSA_WITH_AES_128_CCM | sha-256 | | TLS_DHE_RSA_WITH_AES_256_CCM | sha-256 | | TLS_DHE_PSK_WITH_AES_128_CCM | sha-256 | | TLS_DHE_PSK_WITH_AES_256_CCM | sha-256 | | TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256 | sha-256 | | TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256 | sha-256 | | TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256 | sha-256 | | TLS_ECDHE_PSK_WITH_CHACHA20_POLY1305_SHA256 | sha-256 | | TLS_DHE_PSK_WITH_CHACHA20_POLY1305_SHA256 | sha-256 | | TLS_ECDHE_PSK_WITH_AES_128_GCM_SHA256 | sha-256 | | TLS_ECDHE_PSK_WITH_AES_256_GCM_SHA384 | sha-384 | | TLS_ECDHE_PSK_WITH_AES_128_CCM_SHA256 | sha-256 | +-----------------------------------------------+---------+
Table 1-1 TLS 1.2 Compatibility Matrix Part 1: ciper-suites mapping to hash-algorithm
+--------------------------------------------- +---------------------+ | ciper-suites in hello-params-grouping | symmetric | | | | +--------------------------------------------- +---------------------+ | TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 | enc-aes-128-gcm | | TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 | enc-aes-256-gcm | | TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 | enc-aes-128-gcm | | TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 | enc-aes-256-gcm | | TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 | enc-aes-128-gcm | | TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 | enc-aes-256-gcm | | TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 | enc-aes-128-gcm | | TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 | enc-aes-256-gcm | | TLS_DHE_RSA_WITH_AES_128_CCM | enc-aes-128-ccm | | TLS_DHE_RSA_WITH_AES_256_CCM | enc-aes-256-ccm | | TLS_DHE_PSK_WITH_AES_128_CCM | enc-aes-128-ccm | | TLS_DHE_PSK_WITH_AES_256_CCM | enc-aes-256-ccm | | TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256 |enc-chacha20-poly1305| | TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256|enc-chacha20-poly1305| | TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256 |enc-chacha20-poly1305| | TLS_ECDHE_PSK_WITH_CHACHA20_POLY1305_SHA256 |enc-chacha20-poly1305| | TLS_DHE_PSK_WITH_CHACHA20_POLY1305_SHA256 |enc-chacha20-poly1305| | TLS_ECDHE_PSK_WITH_AES_128_GCM_SHA256 | enc-aes-128-gcm | | TLS_ECDHE_PSK_WITH_AES_256_GCM_SHA384 | enc-aes-256-gcm | | TLS_ECDHE_PSK_WITH_AES_128_CCM_SHA256 | enc-aes-128-ccm | +--------------------------------------------- +---------------------+
Table 1-2 TLS 1.2 Compatibility Matrix Part 2: ciper-suites mapping to symmetric-key-encryption-algorithm
+--------------------------------------------- +---------------------+ | ciper-suites in hello-params-grouping | MAC | | | | +--------------------------------------------- +---------------------+ | TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 | mac-aes-128-gcm | | TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 | mac-aes-256-gcm | | TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 | mac-aes-128-gcm | | TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 | mac-aes-256-gcm | | TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 | mac-aes-128-gcm | | TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 | mac-aes-256-gcm | | TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 | mac-aes-128-gcm | | TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 | mac-aes-256-gcm | | TLS_DHE_RSA_WITH_AES_128_CCM | mac-aes-128-ccm | | TLS_DHE_RSA_WITH_AES_256_CCM | mac-aes-256-ccm | | TLS_DHE_PSK_WITH_AES_128_CCM | mac-aes-128-ccm | | TLS_DHE_PSK_WITH_AES_256_CCM | mac-aes-256-ccm | | TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256 |mac-chacha20-poly1305| | TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256|mac-chacha20-poly1305| | TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256 |mac-chacha20-poly1305| | TLS_ECDHE_PSK_WITH_CHACHA20_POLY1305_SHA256 |mac-chacha20-poly1305| | TLS_DHE_PSK_WITH_CHACHA20_POLY1305_SHA256 |mac-chacha20-poly1305| | TLS_ECDHE_PSK_WITH_AES_128_GCM_SHA256 | mac-aes-128-gcm | | TLS_ECDHE_PSK_WITH_AES_256_GCM_SHA384 | mac-aes-256-gcm | | TLS_ECDHE_PSK_WITH_AES_128_CCM_SHA256 | mac-aes-128-ccm | +--------------------------------------------- +---------------------+
Table 1-3 TLS 1.2 Compatibility Matrix Part 3: ciper-suites mapping to MAC-algorithm
+----------------------------------------------+----------------------+ |ciper-suites in hello-params-grouping | signature | +--------------------------------------------- +----------------------+ | TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 | rsa-pkcs1-sha256 | | TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 | rsa-pkcs1-sha384 | | TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 | N/A | | TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 | N/A | | TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |ecdsa-secp256r1-sha256| | TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 |ecdsa-secp384r1-sha384| | TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 | rsa-pkcs1-sha256 | | TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 | rsa-pkcs1-sha384 | | TLS_DHE_RSA_WITH_AES_128_CCM | rsa-pkcs1-sha256 | | TLS_DHE_RSA_WITH_AES_256_CCM | rsa-pkcs1-sha256 | | TLS_DHE_PSK_WITH_AES_128_CCM | N/A | | TLS_DHE_PSK_WITH_AES_256_CCM | N/A | | TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256 | rsa-pkcs1-sha256 | | TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256|ecdsa-secp256r1-sha256| | TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256 | rsa-pkcs1-sha256 | | TLS_ECDHE_PSK_WITH_CHACHA20_POLY1305_SHA256 | N/A | | TLS_DHE_PSK_WITH_CHACHA20_POLY1305_SHA256 | N/A | | TLS_ECDHE_PSK_WITH_AES_128_GCM_SHA256 | N/A | | TLS_ECDHE_PSK_WITH_AES_256_GCM_SHA384 | N/A | | TLS_ECDHE_PSK_WITH_AES_128_CCM_SHA256 | N/A | +----------------------------------------------+----------------------+
Table 1-4 TLS 1.2 Compatibility Matrix Part 4: ciper-suites mapping to signature-algorithm
+----------------------------------------------+-----------------------+ |ciper-suites in hello-params-grouping | key-negotiation | +----------------------------------------------+-----------------------+ | TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 | dhe-ffdhe2048, ... | | TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 | dhe-ffdhe2048, ... | | TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 | psk-dhe-ffdhe2048, ...| | TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 | psk-dhe-ffdhe2048, ...| | TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 | ecdhe-secp256r1, ... | | TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 | ecdhe-secp256r1, ... | | TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 | ecdhe-secp256r1, ... | | TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 | ecdhe-secp256r1, ... | | TLS_DHE_RSA_WITH_AES_128_CCM | dhe-ffdhe2048, ... | | TLS_DHE_RSA_WITH_AES_256_CCM | dhe-ffdhe2048, ... | | TLS_DHE_PSK_WITH_AES_128_CCM | psk-dhe-ffdhe2048, ...| | TLS_DHE_PSK_WITH_AES_256_CCM | psk-dhe-ffdhe2048, ...| | TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256 | ecdhe-secp256r1, ... | | TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256| ecdhe-secp256r1, ... | | TLS_DHE_RSA_WITH_CHACHA20_POLY1305_SHA256 | dhe-ffdhe2048, ... | | TLS_ECDHE_PSK_WITH_CHACHA20_POLY1305_SHA256 |psk-ecdhe-secp256r1,...| | TLS_DHE_PSK_WITH_CHACHA20_POLY1305_SHA256 | psk-dhe-ffdhe2048, ...| | TLS_ECDHE_PSK_WITH_AES_128_GCM_SHA256 |psk-ecdhe-secp256r1,...| | TLS_ECDHE_PSK_WITH_AES_256_GCM_SHA384 |psk-ecdhe-secp256r1,...| | TLS_ECDHE_PSK_WITH_AES_128_CCM_SHA256 |psk-ecdhe-secp256r1,...| +----------------------------------------------+-----------------------+
Table 1-5 TLS 1.2 Compatibility Matrix Part 5: ciper-suites mapping to key-negotiation-algorithm
+------------------------------+---------+ | ciper-suites in hello | HASH | | -params-grouping | | +------------------------------+---------+ | TLS_AES_128_GCM_SHA256 | sha-256 | | TLS_AES_256_GCM_SHA384 | sha-384 | | TLS_CHACHA20_POLY1305_SHA256 | sha-256 | | TLS_AES_128_CCM_SHA256 | sha-256 | +------------------------------+---------+
Table 2-1 TLS 1.3 Compatibility Matrix Part 1: ciper-suites mapping to hash-algorithm
+------------------------------+-----------------------+ | ciper-suites in hello | symmetric | | -params-grouping | | +------------------------------+-----------------------+ | TLS_AES_128_GCM_SHA256 | enc-aes-128-gcm | | TLS_AES_256_GCM_SHA384 | enc-aes-128-gcm | | TLS_CHACHA20_POLY1305_SHA256 | enc-chacha20-poly1305 | | TLS_AES_128_CCM_SHA256 | enc-aes-128-ccm | +------------------------------+-----------------------+
Table 2-2 TLS 1.3 Compatibility Matrix Part 2: ciper-suites mapping to symmetric-key--encryption-algorithm
+------------------------------+-----------------------+ | ciper-suites in hello | symmetric | | -params-grouping | | +------------------------------+-----------------------+ | TLS_AES_128_GCM_SHA256 | mac-aes-128-gcm | | TLS_AES_256_GCM_SHA384 | mac-aes-128-gcm | | TLS_CHACHA20_POLY1305_SHA256 | mac-chacha20-poly1305 | | TLS_AES_128_CCM_SHA256 | mac-aes-128-ccm | +------------------------------+-----------------------+
Table 2-3 TLS 1.3 Compatibility Matrix Part 3: ciper-suites mapping to MAC-algorithm
+----------------------------+-------------------------+ |signatureScheme in hello | signature | | -params-grouping | | +----------------------------+-------------------------+ | rsa-pkcs1-sha256 | rsa-pkcs1-sha256 | | rsa-pkcs1-sha384 | rsa-pkcs1-sha384 | | rsa-pkcs1-sha512 | rsa-pkcs1-sha512 | | rsa-pss-rsae-sha256 | rsa-pss-rsae-sha256 | | rsa-pss-rsae-sha384 | rsa-pss-rsae-sha384 | | rsa-pss-rsae-sha512 | rsa-pss-rsae-sha512 | | rsa-pss-pss-sha256 | rsa-pss-pss-sha256 | | rsa-pss-pss-sha384 | rsa-pss-pss-sha384 | | rsa-pss-pss-sha512 | rsa-pss-pss-sha512 | | ecdsa-secp256r1-sha256 | ecdsa-secp256r1-sha256 | | ecdsa-secp384r1-sha384 | ecdsa-secp384r1-sha384 | | ecdsa-secp521r1-sha512 | ecdsa-secp521r1-sha512 | | ed25519 | ed25519 | | ed448 | ed448 | +----------------------------+-------------------------+
Table 2-4 TLS 1.3 Compatibility Matrix Part 4: SignatureScheme mapping to signature-algorithm
+----------------------------+-------------------------+ |supported Groups in hello | key-negotiation | | -params-grouping | | +----------------------------+-------------------------+ | dhe-ffdhe2048 | dhe-ffdhe2048 | | dhe-ffdhe3072 | dhe-ffdhe3072 | | dhe-ffdhe4096 | dhe-ffdhe4096 | | dhe-ffdhe6144 | dhe-ffdhe6144 | | dhe-ffdhe8192 | dhe-ffdhe8192 | | psk-dhe-ffdhe2048 | psk-dhe-ffdhe2048 | | psk-dhe-ffdhe3072 | psk-dhe-ffdhe3072 | | psk-dhe-ffdhe4096 | psk-dhe-ffdhe4096 | | psk-dhe-ffdhe6144 | psk-dhe-ffdhe6144 | | psk-dhe-ffdhe8192 | psk-dhe-ffdhe8192 | | ecdhe-secp256r1 | ecdhe-secp256r1 | | ecdhe-secp384r1 | ecdhe-secp384r1 | | ecdhe-secp521r1 | ecdhe-secp521r1 | | ecdhe-x25519 | ecdhe-x25519 | | ecdhe-x448 | ecdhe-x448 | | psk-ecdhe-secp256r1 | psk-ecdhe-secp256r1 | | psk-ecdhe-secp384r1 | psk-ecdhe-secp384r1 | | psk-ecdhe-secp521r1 | psk-ecdhe-secp521r1 | | psk-ecdhe-x25519 | psk-ecdhe-x25519 | | psk-ecdhe-x448 | psk-ecdhe-x448 | +----------------------------+-------------------------+
Table 2-5 TLS 1.3 Compatibility Matrix Part 5: Supported Groups mapping to key-negotiation-algorithm
[I-D.ietf-netconf-crypto-types] defines six categories of cryptographic algorithms (hash-algorithm, symmetric-key-encryption-algorithm, mac-algorithm, asymmetric-key-encryption-algorithm, signature-algorithm, key-negotiation-algorithm) and lists several widely accepted algorithms for each of them. The TLS client and server models use one or more of these algorithms. The following tables are provided, in part to define the subset of algorithms defined in the crypto-types model used by TLS, and in part to ensure compatibility of configured TLS cryptographic parameters for configuring its permitted TLS algorithms:
Note that in Table 1-5:
Features are defined for algorithms that are OPTIONAL or are not widely supported by popular implementations. Note that the list of algorithms is not exhaustive.
The following tree diagram [RFC8340] provides an overview of the data model for the "ietf-tls-common" module.
module: ietf-tls-common
grouping hello-params-grouping
+-- tls-versions
| +-- tls-version* identityref
+-- cipher-suites
+-- cipher-suite* identityref
This section shows how it would appear if the transport-params-grouping were populated with some data.
<hello-params
xmlns="urn:ietf:params:xml:ns:yang:ietf-tls-common"
xmlns:tlscmn="urn:ietf:params:xml:ns:yang:ietf-tls-common">
<tls-versions>
<tls-version>tlscmn:tls-1.1</tls-version>
<tls-version>tlscmn:tls-1.2</tls-version>
</tls-versions>
<cipher-suites>
<cipher-suite>tlscmn:dhe-rsa-with-aes-128-cbc-sha</cipher-suite>
<cipher-suite>tlscmn:rsa-with-aes-128-cbc-sha</cipher-suite>
<cipher-suite>tlscmn:rsa-with-3des-ede-cbc-sha</cipher-suite>
</cipher-suites>
</hello-params>
This YANG module has a normative references to [RFC4346], [RFC5246], [RFC5288], [RFC5289], and [RFC8422].
This YANG module has a informative references to [RFC2246], [RFC4346], [RFC5246], and [RFC8446].
<CODE BEGINS> file "ietf-tls-common@2019-03-09.yang"
module ietf-tls-common {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-tls-common";
prefix tlscmn;
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web: <http://datatracker.ietf.org/wg/netconf/>
WG List: <mailto:netconf@ietf.org>
Author: Kent Watsen <mailto:kent+ietf@watsen.net>
Author: Gary Wu <mailto:garywu@cisco.com>";
description
"This module defines a common features, identities, and
groupings for Transport Layer Security (TLS).
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
are to be interpreted as described in BCP 14 [RFC2119]
[RFC8174] when, and only when, they appear in all
capitals, as shown here.
Copyright (c) 2019 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2019-03-09 {
description
"Initial version";
reference
"RFC XXXX: YANG Groupings for TLS Clients and TLS Servers";
}
// Features
feature tls-1_0 {
description
"TLS Protocol Version 1.0 is supported.";
reference
"RFC 2246: The TLS Protocol Version 1.0";
}
feature tls-1_1 {
description
"TLS Protocol Version 1.1 is supported.";
reference
"RFC 4346: The Transport Layer Security (TLS) Protocol
Version 1.1";
}
feature tls-1_2 {
description
"TLS Protocol Version 1.2 is supported.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
feature tls-1_3 {
description
"TLS Protocol Version 1.2 is supported.";
reference
"RFC 8446: The Transport Layer Security (TLS) Protocol
Version 1.3";
}
feature tls-ecc {
description
"Elliptic Curve Cryptography (ECC) is supported for TLS.";
reference
"RFC 8422: Elliptic Curve Cryptography (ECC) Cipher Suites
for Transport Layer Security (TLS)";
}
feature tls-dhe {
description
"Ephemeral Diffie-Hellman key exchange is supported for TLS.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
feature tls-3des {
description
"The Triple-DES block cipher is supported for TLS.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
feature tls-gcm {
description
"The Galois/Counter Mode authenticated encryption mode is
supported for TLS.";
reference
"RFC 5288: AES Galois Counter Mode (GCM) Cipher Suites for
TLS";
}
feature tls-sha2 {
description
"The SHA2 family of cryptographic hash functions is supported
for TLS.";
reference
"FIPS PUB 180-4: Secure Hash Standard (SHS)";
}
// Identities
identity tls-version-base {
description
"Base identity used to identify TLS protocol versions.";
}
identity tls-1.0 {
base tls-version-base;
if-feature "tls-1_0";
description
"TLS Protocol Version 1.0.";
reference
"RFC 2246: The TLS Protocol Version 1.0";
}
identity tls-1.1 {
base tls-version-base;
if-feature "tls-1_1";
description
"TLS Protocol Version 1.1.";
reference
"RFC 4346: The Transport Layer Security (TLS) Protocol
Version 1.1";
}
identity tls-1.2 {
base tls-version-base;
if-feature "tls-1_2";
description
"TLS Protocol Version 1.2.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity cipher-suite-base {
description
"Base identity used to identify TLS cipher suites.";
}
identity rsa-with-aes-128-cbc-sha {
base cipher-suite-base;
description
"Cipher suite TLS_RSA_WITH_AES_128_CBC_SHA.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity rsa-with-aes-256-cbc-sha {
base cipher-suite-base;
description
"Cipher suite TLS_RSA_WITH_AES_256_CBC_SHA.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity rsa-with-aes-128-cbc-sha256 {
base cipher-suite-base;
if-feature "tls-sha2";
description
"Cipher suite TLS_RSA_WITH_AES_128_CBC_SHA256.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity rsa-with-aes-256-cbc-sha256 {
base cipher-suite-base;
if-feature "tls-sha2";
description
"Cipher suite TLS_RSA_WITH_AES_256_CBC_SHA256.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity dhe-rsa-with-aes-128-cbc-sha {
base cipher-suite-base;
if-feature "tls-dhe";
description
"Cipher suite TLS_DHE_RSA_WITH_AES_128_CBC_SHA.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity dhe-rsa-with-aes-256-cbc-sha {
base cipher-suite-base;
if-feature "tls-dhe";
description
"Cipher suite TLS_DHE_RSA_WITH_AES_256_CBC_SHA.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity dhe-rsa-with-aes-128-cbc-sha256 {
base cipher-suite-base;
if-feature "tls-dhe and tls-sha2";
description
"Cipher suite TLS_DHE_RSA_WITH_AES_128_CBC_SHA256.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity dhe-rsa-with-aes-256-cbc-sha256 {
base cipher-suite-base;
if-feature "tls-dhe and tls-sha2";
description
"Cipher suite TLS_DHE_RSA_WITH_AES_256_CBC_SHA256.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity ecdhe-ecdsa-with-aes-128-cbc-sha256 {
base cipher-suite-base;
if-feature "tls-ecc and tls-sha2";
description
"Cipher suite TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256.";
reference
"RFC 5289: TLS Elliptic Curve Cipher Suites with
SHA-256/384 and AES Galois Counter Mode (GCM)";
}
identity ecdhe-ecdsa-with-aes-256-cbc-sha384 {
base cipher-suite-base;
if-feature "tls-ecc and tls-sha2";
description
"Cipher suite TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384.";
reference
"RFC 5289: TLS Elliptic Curve Cipher Suites with
SHA-256/384 and AES Galois Counter Mode (GCM)";
}
identity ecdhe-rsa-with-aes-128-cbc-sha256 {
base cipher-suite-base;
if-feature "tls-ecc and tls-sha2";
description
"Cipher suite TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256.";
reference
"RFC 5289: TLS Elliptic Curve Cipher Suites with
SHA-256/384 and AES Galois Counter Mode (GCM)";
}
identity ecdhe-rsa-with-aes-256-cbc-sha384 {
base cipher-suite-base;
if-feature "tls-ecc and tls-sha2";
description
"Cipher suite TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384.";
reference
"RFC 5289: TLS Elliptic Curve Cipher Suites with
SHA-256/384 and AES Galois Counter Mode (GCM)";
}
identity ecdhe-ecdsa-with-aes-128-gcm-sha256 {
base cipher-suite-base;
if-feature "tls-ecc and tls-gcm and tls-sha2";
description
"Cipher suite TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256.";
reference
"RFC 5289: TLS Elliptic Curve Cipher Suites with
SHA-256/384 and AES Galois Counter Mode (GCM)";
}
identity ecdhe-ecdsa-with-aes-256-gcm-sha384 {
base cipher-suite-base;
if-feature "tls-ecc and tls-gcm and tls-sha2";
description
"Cipher suite TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384.";
reference
"RFC 5289: TLS Elliptic Curve Cipher Suites with
SHA-256/384 and AES Galois Counter Mode (GCM)";
}
identity ecdhe-rsa-with-aes-128-gcm-sha256 {
base cipher-suite-base;
if-feature "tls-ecc and tls-gcm and tls-sha2";
description
"Cipher suite TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256.";
reference
"RFC 5289: TLS Elliptic Curve Cipher Suites with
SHA-256/384 and AES Galois Counter Mode (GCM)";
}
identity ecdhe-rsa-with-aes-256-gcm-sha384 {
base cipher-suite-base;
if-feature "tls-ecc and tls-gcm and tls-sha2";
description
"Cipher suite TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384.";
reference
"RFC 5289: TLS Elliptic Curve Cipher Suites with
SHA-256/384 and AES Galois Counter Mode (GCM)";
}
identity rsa-with-3des-ede-cbc-sha {
base cipher-suite-base;
if-feature "tls-3des";
description
"Cipher suite TLS_RSA_WITH_3DES_EDE_CBC_SHA.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
}
identity ecdhe-rsa-with-3des-ede-cbc-sha {
base cipher-suite-base;
if-feature "tls-ecc and tls-3des";
description
"Cipher suite TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA.";
reference
"RFC 8422: Elliptic Curve Cryptography (ECC) Cipher Suites
for Transport Layer Security (TLS)";
}
identity ecdhe-rsa-with-aes-128-cbc-sha {
base cipher-suite-base;
if-feature "tls-ecc";
description
"Cipher suite TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA.";
reference
"RFC 8422: Elliptic Curve Cryptography (ECC) Cipher Suites
for Transport Layer Security (TLS)";
}
identity ecdhe-rsa-with-aes-256-cbc-sha {
base cipher-suite-base;
if-feature "tls-ecc";
description
"Cipher suite TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA.";
reference
"RFC 8422: Elliptic Curve Cryptography (ECC) Cipher Suites
for Transport Layer Security (TLS)";
}
// Groupings
grouping hello-params-grouping {
description
"A reusable grouping for TLS hello message parameters.";
reference
"RFC 5246: The Transport Layer Security (TLS) Protocol
Version 1.2";
container tls-versions {
description
"Parameters regarding TLS versions.";
leaf-list tls-version {
type identityref {
base tls-version-base;
}
description
"Acceptable TLS protocol versions.
If this leaf-list is not configured (has zero elements)
the acceptable TLS protocol versions are implementation-
defined.";
}
}
container cipher-suites {
description
"Parameters regarding cipher suites.";
leaf-list cipher-suite {
type identityref {
base cipher-suite-base;
}
ordered-by user;
description
"Acceptable cipher suites in order of descending
preference. The configured host key algorithms should
be compatible with the algorithm used by the configured
private key. Please see Section 5 of RFC XXXX for
valid combinations.
If this leaf-list is not configured (has zero elements)
the acceptable cipher suites are implementation-
defined.";
reference
"RFC XXXX: YANG Groupings for TLS Clients and TLS Servers";
}
}
}
}
<CODE ENDS>
The YANG modules defined in this document are designed to be accessed via YANG based management protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols have mandatory-to-implement secure transport layers (e.g., SSH, TLS) with mutual authentication.
The NETCONF access control model (NACM) [RFC8341] provides the means to restrict access for particular users to a pre-configured subset of all available protocol operations and content.
Since the modules defined in this document only define groupings, these considerations are primarily for the designers of other modules that use these groupings.
There are a number of data nodes defined in the YANG modules that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability:
Some of the readable data nodes in the YANG modules may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability:
Some of the RPC operations in this YANG module may be considered sensitive or vulnerable in some network environments. It is thus important to control access to these operations. These are the operations and their sensitivity/vulnerability:
This document registers three URIs in the "ns" subregistry of the IETF XML Registry [RFC3688]. Following the format in [RFC3688], the following registrations are requested:
URI: urn:ietf:params:xml:ns:yang:ietf-tls-client Registrant Contact: The NETCONF WG of the IETF. XML: N/A, the requested URI is an XML namespace. URI: urn:ietf:params:xml:ns:yang:ietf-tls-server Registrant Contact: The NETCONF WG of the IETF. XML: N/A, the requested URI is an XML namespace. URI: urn:ietf:params:xml:ns:yang:ietf-tls-common Registrant Contact: The NETCONF WG of the IETF. XML: N/A, the requested URI is an XML namespace.
This document registers three YANG modules in the YANG Module Names registry [RFC6020]. Following the format in [RFC6020], the following registrations are requested:
name: ietf-tls-client namespace: urn:ietf:params:xml:ns:yang:ietf-tls-client prefix: tlsc reference: RFC XXXX name: ietf-tls-server namespace: urn:ietf:params:xml:ns:yang:ietf-tls-server prefix: tlss reference: RFC XXXX name: ietf-tls-common namespace: urn:ietf:params:xml:ns:yang:ietf-tls-common prefix: tlscmn reference: RFC XXXX
| [RFC2246] | Dierks, T. and C. Allen, "The TLS Protocol Version 1.0", RFC 2246, DOI 10.17487/RFC2246, January 1999. |
| [RFC2818] | Rescorla, E., "HTTP Over TLS", RFC 2818, DOI 10.17487/RFC2818, May 2000. |
| [RFC3688] | Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004. |
| [RFC4346] | Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.1", RFC 4346, DOI 10.17487/RFC4346, April 2006. |
| [RFC5246] | Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008. |
| [RFC6241] | Enns, R., Bjorklund, M., Schoenwaelder, J. and A. Bierman, "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011. |
| [RFC8040] | Bierman, A., Bjorklund, M. and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017. |
| [RFC8071] | Watsen, K., "NETCONF Call Home and RESTCONF Call Home", RFC 8071, DOI 10.17487/RFC8071, February 2017. |
| [RFC8340] | Bjorklund, M. and L. Berger, "YANG Tree Diagrams", BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018. |
The authors would like to thank for following for lively discussions on list and in the halls (ordered by last name): Andy Bierman, Martin Bjorklund, Benoit Claise, Mehmet Ersue, Balázs Kovács, David Lamparter, Alan Luchuk, Ladislav Lhotka, Radek Krejci, Tom Petch, Juergen Schoenwaelder, Phil Shafer, Sean Turner, and Bert Wijnen.