Network Working Group M. Bjorklund, Ed. Internet-Draft Tail-f Systems Intended status: Standards Track May 5, 2008 Expires: November 6, 2008 YANG - A data modeling language for NETCONF draft-ietf-netmod-yang-00 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on November 6, 2008. Copyright Notice Copyright (C) The IETF Trust (2008). Bjorklund Expires November 6, 2008 [Page 1] Internet-Draft YANG May 2008 Abstract YANG is a data modeling language used to model configuration and state data manipulated by the NETCONF protocol, NETCONF remote procedure calls, and NETCONF notifications. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 7 2. Key Words . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 9 4. YANG Overview . . . . . . . . . . . . . . . . . . . . . . . . 12 4.1. Functional Overview . . . . . . . . . . . . . . . . . . . 12 4.2. Language Overview . . . . . . . . . . . . . . . . . . . . 13 4.2.1. Modules and Submodules . . . . . . . . . . . . . . . 13 4.2.2. Data Modeling Basics . . . . . . . . . . . . . . . . 14 4.2.3. Operational Data . . . . . . . . . . . . . . . . . . 19 4.2.4. Built-in Types . . . . . . . . . . . . . . . . . . . 19 4.2.5. Derived Types (typedef) . . . . . . . . . . . . . . . 20 4.2.6. Reusable Node Groups (grouping) . . . . . . . . . . . 21 4.2.7. Choices . . . . . . . . . . . . . . . . . . . . . . . 22 4.2.8. Extending Data Models (augment) . . . . . . . . . . . 23 4.2.9. RPC Definitions . . . . . . . . . . . . . . . . . . . 24 4.2.10. Notification Definitions . . . . . . . . . . . . . . 25 5. Language Concepts . . . . . . . . . . . . . . . . . . . . . . 27 5.1. Modules and Submodules . . . . . . . . . . . . . . . . . 27 5.1.1. Module Hierarchies . . . . . . . . . . . . . . . . . 27 5.2. File Layout . . . . . . . . . . . . . . . . . . . . . . . 27 5.3. Object Based View of YANG . . . . . . . . . . . . . . . . 28 5.4. XML Namespaces . . . . . . . . . . . . . . . . . . . . . 28 5.4.1. YANG Namespace . . . . . . . . . . . . . . . . . . . 29 5.5. Ordering . . . . . . . . . . . . . . . . . . . . . . . . 29 5.6. Containers with Presence . . . . . . . . . . . . . . . . 30 5.7. Scoping . . . . . . . . . . . . . . . . . . . . . . . . . 30 5.8. Nested Typedefs and Groupings . . . . . . . . . . . . . . 31 6. YANG syntax . . . . . . . . . . . . . . . . . . . . . . . . . 32 6.1. Lexicographical Tokenization . . . . . . . . . . . . . . 32 6.1.1. Comments . . . . . . . . . . . . . . . . . . . . . . 32 6.1.2. Tokens . . . . . . . . . . . . . . . . . . . . . . . 32 6.1.3. Quoting . . . . . . . . . . . . . . . . . . . . . . . 32 6.2. Identifiers . . . . . . . . . . . . . . . . . . . . . . . 34 6.2.1. Identifiers and their namespaces . . . . . . . . . . 34 6.3. Statements . . . . . . . . . . . . . . . . . . . . . . . 34 6.3.1. Language Extensions . . . . . . . . . . . . . . . . . 35 6.4. XPath Evaluations . . . . . . . . . . . . . . . . . . . . 35 7. YANG Statements . . . . . . . . . . . . . . . . . . . . . . . 36 7.1. The module Statement . . . . . . . . . . . . . . . . . . 36 Bjorklund Expires November 6, 2008 [Page 2] Internet-Draft YANG May 2008 7.1.1. The module's Substatements . . . . . . . . . . . . . 37 7.1.2. The yang-version Statement . . . . . . . . . . . . . 38 7.1.3. The namespace Statement . . . . . . . . . . . . . . . 38 7.1.4. The prefix Statement . . . . . . . . . . . . . . . . 39 7.1.5. The import Statement . . . . . . . . . . . . . . . . 39 7.1.6. The include Statement . . . . . . . . . . . . . . . . 40 7.1.7. The organization Statement . . . . . . . . . . . . . 40 7.1.8. The contact Statement . . . . . . . . . . . . . . . . 40 7.1.9. The revision Statement . . . . . . . . . . . . . . . 40 7.1.10. Usage Example . . . . . . . . . . . . . . . . . . . . 41 7.2. The submodule Statement . . . . . . . . . . . . . . . . . 41 7.2.1. The submodule's Substatements . . . . . . . . . . . . 43 7.2.2. The belongs-to Statement . . . . . . . . . . . . . . 44 7.2.3. Usage Example . . . . . . . . . . . . . . . . . . . . 45 7.3. The typedef Statement . . . . . . . . . . . . . . . . . . 45 7.3.1. The typedef's Substatements . . . . . . . . . . . . . 46 7.3.2. The typedef's type Statement . . . . . . . . . . . . 46 7.3.3. The units Statement . . . . . . . . . . . . . . . . . 46 7.3.4. The typedef's default Statement . . . . . . . . . . . 46 7.3.5. Usage Example . . . . . . . . . . . . . . . . . . . . 47 7.4. The type Statement . . . . . . . . . . . . . . . . . . . 47 7.4.1. The type's Substatements . . . . . . . . . . . . . . 47 7.5. The container Statement . . . . . . . . . . . . . . . . . 47 7.5.1. The container's Substatements . . . . . . . . . . . . 48 7.5.2. The must Statement . . . . . . . . . . . . . . . . . 48 7.5.3. The must's Substatements . . . . . . . . . . . . . . 49 7.5.4. The presence Statement . . . . . . . . . . . . . . . 50 7.5.5. The container's Child Node Statements . . . . . . . . 50 7.5.6. XML Encoding Rules . . . . . . . . . . . . . . . . . 50 7.5.7. NETCONF Operations . . . . . . . . . . 51 7.5.8. Usage Example . . . . . . . . . . . . . . . . . . . . 51 7.6. The leaf Statement . . . . . . . . . . . . . . . . . . . 52 7.6.1. The leaf's Substatements . . . . . . . . . . . . . . 53 7.6.2. The leaf's type Statement . . . . . . . . . . . . . . 53 7.6.3. The leaf's default Statement . . . . . . . . . . . . 53 7.6.4. The leaf's mandatory Statement . . . . . . . . . . . 53 7.6.5. XML Encoding Rules . . . . . . . . . . . . . . . . . 54 7.6.6. NETCONF Operations . . . . . . . . . . 54 7.6.7. Usage Example . . . . . . . . . . . . . . . . . . . . 54 7.7. The leaf-list Statement . . . . . . . . . . . . . . . . . 55 7.7.1. The leaf-list's Substatements . . . . . . . . . . . . 56 7.7.2. The min-elements Statement . . . . . . . . . . . . . 56 7.7.3. The max-elements Statement . . . . . . . . . . . . . 56 7.7.4. The ordered-by Statement . . . . . . . . . . . . . . 56 7.7.5. XML Encoding Rules . . . . . . . . . . . . . . . . . 57 7.7.6. NETCONF operations . . . . . . . . . . 57 7.7.7. Usage Example . . . . . . . . . . . . . . . . . . . . 58 7.8. The list Statement . . . . . . . . . . . . . . . . . . . 59 Bjorklund Expires November 6, 2008 [Page 3] Internet-Draft YANG May 2008 7.8.1. The list's Substatements . . . . . . . . . . . . . . 60 7.8.2. The list's key Statement . . . . . . . . . . . . . . 60 7.8.3. The lists's unique Statement . . . . . . . . . . . . 61 7.8.4. The list's Child Node Statements . . . . . . . . . . 62 7.8.5. XML Encoding Rules . . . . . . . . . . . . . . . . . 62 7.8.6. NETCONF operations . . . . . . . . . . 62 7.8.7. Usage Example . . . . . . . . . . . . . . . . . . . . 63 7.9. The choice Statement . . . . . . . . . . . . . . . . . . 66 7.9.1. The choice's Substatements . . . . . . . . . . . . . 66 7.9.2. The choice's case Statement . . . . . . . . . . . . . 66 7.9.3. The choice's default Statement . . . . . . . . . . . 68 7.9.4. The choice's mandatory Statement . . . . . . . . . . 69 7.9.5. XML Encoding Rules . . . . . . . . . . . . . . . . . 69 7.9.6. NETCONF operations . . . . . . . . . . 69 7.9.7. Usage Example . . . . . . . . . . . . . . . . . . . . 70 7.10. The anyxml Statement . . . . . . . . . . . . . . . . . . 71 7.10.1. The anyxml's Substatements . . . . . . . . . . . . . 71 7.10.2. XML Encoding Rules . . . . . . . . . . . . . . . . . 71 7.10.3. NETCONF operations . . . . . . . . . . 71 7.10.4. Usage Example . . . . . . . . . . . . . . . . . . . . 72 7.11. The grouping Statement . . . . . . . . . . . . . . . . . 72 7.11.1. The grouping's Substatements . . . . . . . . . . . . 73 7.11.2. Usage Example . . . . . . . . . . . . . . . . . . . . 74 7.12. The uses Statement . . . . . . . . . . . . . . . . . . . 74 7.12.1. The uses's Substatements . . . . . . . . . . . . . . 75 7.12.2. The uses's Refinement Statements . . . . . . . . . . 75 7.12.3. XML Encoding Rules . . . . . . . . . . . . . . . . . 76 7.12.4. Usage Example . . . . . . . . . . . . . . . . . . . . 76 7.13. The rpc Statement . . . . . . . . . . . . . . . . . . . . 77 7.13.1. The rpc's Substatements . . . . . . . . . . . . . . . 77 7.13.2. The input Statement . . . . . . . . . . . . . . . . . 77 7.13.3. The output Statement . . . . . . . . . . . . . . . . 78 7.14. The notification Statement . . . . . . . . . . . . . . . 79 7.14.1. The notification's Substatements . . . . . . . . . . 80 7.15. The augment Statement . . . . . . . . . . . . . . . . . . 80 7.15.1. The augment's Substatements . . . . . . . . . . . . . 81 7.15.2. The when Statement . . . . . . . . . . . . . . . . . 81 7.15.3. XML Encoding Rules . . . . . . . . . . . . . . . . . 82 7.15.4. Usage Example . . . . . . . . . . . . . . . . . . . . 82 7.16. The extension Statement . . . . . . . . . . . . . . . . . 84 7.16.1. The extension's Substatements . . . . . . . . . . . . 84 7.16.2. The argument Statement . . . . . . . . . . . . . . . 84 7.16.3. Usage Example . . . . . . . . . . . . . . . . . . . . 85 7.17. Common Statements . . . . . . . . . . . . . . . . . . . . 86 7.17.1. The config Statement . . . . . . . . . . . . . . . . 86 7.17.2. The status Statement . . . . . . . . . . . . . . . . 86 7.17.3. The description Statement . . . . . . . . . . . . . . 87 7.17.4. The reference Statement . . . . . . . . . . . . . . . 87 Bjorklund Expires November 6, 2008 [Page 4] Internet-Draft YANG May 2008 8. Built-in Types . . . . . . . . . . . . . . . . . . . . . . . 88 8.1. The Integer Built-in Types . . . . . . . . . . . . . . . 88 8.1.1. Lexicographic Representation . . . . . . . . . . . . 89 8.1.2. Restrictions . . . . . . . . . . . . . . . . . . . . 89 8.1.3. The range Statement . . . . . . . . . . . . . . . . . 89 8.1.4. Usage Example . . . . . . . . . . . . . . . . . . . . 90 8.2. The Floating Point Built-in Types . . . . . . . . . . . . 90 8.2.1. Lexicographic Representation . . . . . . . . . . . . 90 8.2.2. Restrictions . . . . . . . . . . . . . . . . . . . . 90 8.2.3. Usage Example . . . . . . . . . . . . . . . . . . . . 91 8.3. The string Built-in Type . . . . . . . . . . . . . . . . 91 8.3.1. Lexicographic Representation . . . . . . . . . . . . 91 8.3.2. Restrictions . . . . . . . . . . . . . . . . . . . . 91 8.3.3. The length Statement . . . . . . . . . . . . . . . . 91 8.3.4. The pattern Statement . . . . . . . . . . . . . . . . 92 8.3.5. Usage Example . . . . . . . . . . . . . . . . . . . . 93 8.4. The boolean Built-in Type . . . . . . . . . . . . . . . . 93 8.4.1. Lexicographic Representation . . . . . . . . . . . . 93 8.4.2. Restrictions . . . . . . . . . . . . . . . . . . . . 93 8.5. The enumeration Built-in Type . . . . . . . . . . . . . . 93 8.5.1. Lexicographic Representation . . . . . . . . . . . . 93 8.5.2. Restrictions . . . . . . . . . . . . . . . . . . . . 93 8.5.3. The enum Statement . . . . . . . . . . . . . . . . . 94 8.5.4. Usage Example . . . . . . . . . . . . . . . . . . . . 95 8.6. The bits Built-in Type . . . . . . . . . . . . . . . . . 95 8.6.1. Restrictions . . . . . . . . . . . . . . . . . . . . 95 8.6.2. Lexicographic Representation . . . . . . . . . . . . 95 8.6.3. The bit Statement . . . . . . . . . . . . . . . . . . 95 8.6.4. Usage Example . . . . . . . . . . . . . . . . . . . . 96 8.7. The binary Built-in Type . . . . . . . . . . . . . . . . 97 8.7.1. Restrictions . . . . . . . . . . . . . . . . . . . . 97 8.7.2. Lexicographic Representation . . . . . . . . . . . . 97 8.8. The keyref Built-in Type . . . . . . . . . . . . . . . . 97 8.8.1. Restrictions . . . . . . . . . . . . . . . . . . . . 97 8.8.2. The path Statement . . . . . . . . . . . . . . . . . 97 8.8.3. Lexicographic Representation . . . . . . . . . . . . 98 8.8.4. Usage Example . . . . . . . . . . . . . . . . . . . . 98 8.9. The empty Built-in Type . . . . . . . . . . . . . . . . . 99 8.9.1. Restrictions . . . . . . . . . . . . . . . . . . . . 99 8.9.2. Lexicographic Representation . . . . . . . . . . . . 100 8.9.3. Usage Example . . . . . . . . . . . . . . . . . . . . 100 8.10. The union Built-in Type . . . . . . . . . . . . . . . . . 100 8.10.1. Restrictions . . . . . . . . . . . . . . . . . . . . 100 8.10.2. Lexicographic Representation . . . . . . . . . . . . 101 8.11. The instance-identifier Built-in Type . . . . . . . . . . 101 8.11.1. Restrictions . . . . . . . . . . . . . . . . . . . . 101 8.11.2. Lexicographic Representation . . . . . . . . . . . . 101 8.11.3. Usage Example . . . . . . . . . . . . . . . . . . . . 101 Bjorklund Expires November 6, 2008 [Page 5] Internet-Draft YANG May 2008 9. Updating a Module . . . . . . . . . . . . . . . . . . . . . . 103 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 104 11. Security Considerations . . . . . . . . . . . . . . . . . . . 105 12. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 106 13. References . . . . . . . . . . . . . . . . . . . . . . . . . 107 13.1. Normative References . . . . . . . . . . . . . . . . . . 107 13.2. Non-Normative References . . . . . . . . . . . . . . . . 108 Appendix A. Derived YANG Types . . . . . . . . . . . . . . . . . 109 A.1. Core YANG Derived Types . . . . . . . . . . . . . . . . . 109 A.2. Internet Specific Derived Types . . . . . . . . . . . . . 114 A.3. IEEE 802 Specific Derived Types . . . . . . . . . . . . . 120 Appendix B. YIN . . . . . . . . . . . . . . . . . . . . . . . . 123 B.1. Formal YIN Definition . . . . . . . . . . . . . . . . . . 123 B.2. Transformation Algorithm YANG-2-YIN . . . . . . . . . . . 123 B.2.1. Usage Example . . . . . . . . . . . . . . . . . . . . 125 B.3. Transformation Algorithm YIN-2-YANG . . . . . . . . . . . 125 B.3.1. Tabulation, Formatting . . . . . . . . . . . . . . . 126 Appendix C. XML Schema Considerations . . . . . . . . . . . . . 127 Appendix D. YANG ABNF Grammar . . . . . . . . . . . . . . . . . 128 Appendix E. Error Responses for YANG Related Errors . . . . . . 146 E.1. Error Message for Data that Violates a YANG unique Statement: . . . . . . . . . . . . . . . . . . . . . . . 146 E.2. Error Message for Data that Violates a YANG max-elements Statement: . . . . . . . . . . . . . . . . . 146 E.3. Error Message for Data that Violates a YANG min-elements Statement: . . . . . . . . . . . . . . . . . 146 E.4. Error Message for Data that Violates a YANG must or when statement, a length, range or pattern restriction: . 146 E.5. Error Message for the "insert" Operation . . . . . . . . 147 Appendix F. Why We Need a New Modeling Language . . . . . . . . 148 F.1. Why not XSD? . . . . . . . . . . . . . . . . . . . . . . 148 F.2. Why not RelaxNG . . . . . . . . . . . . . . . . . . . . . 149 F.3. Why not SMIng . . . . . . . . . . . . . . . . . . . . . . 149 Appendix G. ChangeLog . . . . . . . . . . . . . . . . . . . . . 151 G.1. Version -00 . . . . . . . . . . . . . . . . . . . . . . . 151 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 152 Intellectual Property and Copyright Statements . . . . . . . . . 153 Bjorklund Expires November 6, 2008 [Page 6] Internet-Draft YANG May 2008 1. Introduction Today, the NETCONF protocol [RFC4741] lacks a standardized way to create data models. Instead, vendors are forced to use proprietary solutions. In order for NETCONF to be a interoperable protocol, models must be defined in a vendor-neutral way. YANG provides the language and rules for defining such models for use with NETCONF. YANG is a data modeling language used to model configuration and state data manipulated by the NETCONF protocol, NETCONF remote procedure calls, and NETCONF notifications. This document describes the syntax and semantics of the YANG language, how the data model defined in a YANG module is represented in XML, and how NETCONF operations are being used to manipulate the data. Bjorklund Expires November 6, 2008 [Page 7] Internet-Draft YANG May 2008 2. Key Words The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, [RFC2119]. Bjorklund Expires November 6, 2008 [Page 8] Internet-Draft YANG May 2008 3. Terminology o augment: Adds new nodes to a previously defined node. o base type: The type from which a derived type was derived, which may be either a built-in type or another derived type. o built-in type: A YANG data type defined in the YANG language, such as uint32 or string. o choice: A node where only one of a number of identified alternative values is valid. o container: An interior node in the data tree which exist in zero or one instance. A container node has no value, but rather a set of child nodes. o data definition statement: A statement that defines new data nodes. One of container, leaf, leaf-list, list, augment, uses, and anyxml. o data model: Formal representation of the application-specific components of a conceptual network management programmatic interface. o data model module: Container of definitions pertaining to a specific data model. o data model object: A definition within a data model module that represents a conceptual construct which can be accessed via a network management protocol. Also called an object. o data node: A node in the schema tree that can be instantiated in a data tree. One of container, leaf, leaf-list, and list. o data tree: The instantiated tree of configuration and state data on a device. o derived type: A type which is derived from a built-in type (such as uint32), or another derived type. o extension: An extension attaches non-YANG semantics to nodes. The extension statement defines new statements to express these semantics. o grouping: A reusable set of nodes, which may be used locally in the module, in modules which include it, and by other modules which import from it. Bjorklund Expires November 6, 2008 [Page 9] Internet-Draft YANG May 2008 o identifier: Used to identify different kinds of YANG items by name. o instance identifier: A mechanism for identifying a particular node in a data tree. o interior nodes: Nodes within a hierarchy that are not leaf nodes. o leaf: A node in the data tree with a value but no child nodes. o leaf-list: Like the leaf node but defines a set of uniquely identifiable nodes rather than a single node. Each node has a value but no child nodes. o list: Interior nodes in the data tree which may exist in multiple instances. A list node has no value, but rather a set of child nodes. o MIB: A Management Information Base, traditionally referring to a management information defined using SNMP's SMI. o module: A YANG module defines a hierarchy of nodes which can be used for NETCONF-based operations. With its definitions and the definitions it imports or includes from elsewhere, a module is self-contained and "compilable". o node: A logical location in a hierarchy of data elements. o RPC: A Remote Procedure Call, as used within the NETCONF protocol. o RPC method: A specific Remote Procedure Call, as used within the NETCONF protocol. Also called a protocol operation. o schema node: A node in the schema tree. One of container, leaf, leaf-list, list, choice, case, rpc, input, output, and notification. o schema node identifier: A mechanism for identifying a particular node in the schema tree. o schema tree: The definition hierarchy specified within a module. o submodule: A partial module definition which contributes derived types, groupings, data nodes, RPCs, and notifications to a module. A YANG module can be constructed from a number of submodules. o uses: The "uses" statement is used to instantiate the set of nodes defined in a grouping statement. The instantiated nodes may be Bjorklund Expires November 6, 2008 [Page 10] Internet-Draft YANG May 2008 refined and augmented to tailor them to any specific needs. Bjorklund Expires November 6, 2008 [Page 11] Internet-Draft YANG May 2008 4. YANG Overview 4.1. Functional Overview YANG is a language used to model data for the NETCONF protocol. A YANG module defines a hierarchy of nodes which can be used for NETCONF-based operations, including configuration, state data, remote procedure calls (RPCs), and notifications. This allows a complete description of all data sent between a NETCONF client and server. YANG models the hierarchical organization of data as a tree in which each node has a name, and either a value or a set of child nodes. YANG provides clear and concise descriptions of the nodes, as well as the interaction between those nodes. YANG structures data models into modules and submodules. A module can import data from other external modules, and include data from submodules. The hierarchy can be extended, allowing one module to add data nodes to the hierarchy defined in another module. This augmentation can be conditional, with new nodes to appearing only if certain conditions are met. YANG models can describe constraints to be enforced on the data, restricting the appearance or value of nodes based the presence or value of other nodes in the hierarchy. These constraints are enforceable by either the client or the server, and valid content must abide by them. YANG defines a set of built-in types, and has a type mechanism through which additional types may be defined. Derived types can restrict their base type's set of valid values using mechanisms like range or pattern restrictions that can be enforced by clients or servers. They can also define usage conventions for use of the derived type, such as a string-based type that contains a host name. YANG permits the definition of complex types using reusable grouping of nodes. The instantiation of these groupings can refine or augment the nodes, allowing it to tailor the nodes to its particular needs. Derived types and groupings can be defined in one module or submodule and used in either that location or in another module or submodule that imports or includes it. YANG organizational constructs include defining lists of nodes with the same names and identifying the keys which distinguish list members from each other. Such lists may be defined as either sorted by user or automatically sorted by the system. For user-sorted lists, operations are defined for manipulating the order of the nodes. Bjorklund Expires November 6, 2008 [Page 12] Internet-Draft YANG May 2008 YANG modules can be translated into an XML format called YIN (Appendix B), allowing applications using XML parsers and XSLT scripts to operate on the models. XML Schema [XSD] files can be generated from YANG modules, giving a precise description of the XML representation of the data modeled in YANG modules. YANG strikes a balance between high-level object-oriented modeling and low-level bits-on-the-wire encoding. The reader of a YANG module can easily see the high-level view of the data model while seeing how the object will be encoded in NETCONF operations. YANG is an extensible language, allowing extension statements to be defined by standards bodies, vendors, and individuals. The statement syntax allows these extensions to coexist with standard YANG statements in a natural way, while making extensions stand out sufficiently for the reader to notice them. YANG resists the tendency to solve all possible problems, limiting the problem space to allow expression of NETCONF data models, not arbitrary XML documents or arbitrary data models. The data models described by YANG are designed to be easily operated upon by NETCONF operations. To the extent possible, YANG maintains compatibility with SNMP's SMIv2 (Structure of Management Information version 2 [RFC2578], [RFC2579]). SMIv2-based MIB modules can be automatically translated into YANG modules for read-only access. However YANG is not concerned with reverse translation from YANG to SMIv2. Like NETCONF, YANG targets smooth integration with device's native management infrastructure. This allows implementations to leverage their existing access control mechanisms to protect or expose elements of the data model. 4.2. Language Overview This section introduces some important constructs used in YANG that will aid in the understanding of the language specifics in later sections. 4.2.1. Modules and Submodules YANG defines modules using the "module" statement. This statement defines the name of the module, which is typically used as the base name of the file containing the module. The file suffix ".yang" is typically used for YANG files. A module contains three types of Bjorklund Expires November 6, 2008 [Page 13] Internet-Draft YANG May 2008 statements: module-header statements, revision statements, and definition statements. The module header statements describe the module and give information about the module itself, the revision statements give information about the history of the module, and the definition statements are the body of the module where the data model is defined. Submodule are partial modules that contribute derived types, groupings, data nodes, RPCs and notifications to a module. A module may include a number of submodules, but each submodule may belong to only one module. The "include" statement allows a module or submodule to reference material in submodules, and the "import" statement allows references to material defined in other modules. To reference an item that is defined in an external module it MUST be imported. Identifiers that are neither defined nor imported MUST NOT be visible in the local module. To reference an item that is defined in one of its submodules, the module MUST include the submodule. A submodule that needs to reference an item defined in another submodule of the same module, MUST include this submodule. There MUST NOT be any circular chains of imports or includes. For example, if submodule "a" includes submodule "b", "b" cannot include "a". When a definition in an external module is referenced, a locally defined prefix MUST be used, followed by ":", and then the external identifier. References to definitions in the local module MAY use the prefix notation. References to built-in data types (e.g., int32) MUST NOT use the prefix notation. Forward references are allowed in YANG. 4.2.2. Data Modeling Basics YANG defines four types of nodes for data modeling. In each of the following subsections, the example shows the YANG syntax as well as a corresponding NETCONF XML representation. 4.2.2.1. Leaf Nodes A leaf node contains simple data like an integer or a string. It has exactly one value of a particular type, and no child nodes. YANG Example: Bjorklund Expires November 6, 2008 [Page 14] Internet-Draft YANG May 2008 leaf host-name { type string; description "Hostname for this system"; } NETCONF XML Encoding: my.example.com The "leaf" statement is covered in Section 7.6. 4.2.2.2. Leaf-list Nodes A leaf-list is a sequence of leaf nodes with exactly one value of a particular type per leaf. YANG Example: leaf-list domain-search { type string; description "List of domain names to search"; } NETCONF XML Encoding: high.example.com low.example.com everywhere.example.com The "leaf-list" statement is covered in Section 7.7. 4.2.2.3. Container Nodes A container node is used to group related nodes in a subtree. A container has only child nodes and no value. A container may contain any number of child nodes of any type (including leafs, lists, containers, and leaf-lists). YANG Example: container system { container login { leaf message { type string; description "Message given at start of login session"; } } Bjorklund Expires November 6, 2008 [Page 15] Internet-Draft YANG May 2008 } NETCONF XML Encoding: Good morning, Dave The "container" statement is covered in Section 7.5. 4.2.2.4. List Nodes A list is a sequence of list entries. An entry is like a structure or a record. A list entry is uniquely identified by its key(s). A list entry may contain any number of child nodes of any type (including leafs, lists, containers etc.). YANG Example: list user { key "name"; leaf name { type string; } leaf full-name { type string; } leaf class { type string; } } NETCONF XML Encoding: Bjorklund Expires November 6, 2008 [Page 16] Internet-Draft YANG May 2008 glocks Goldie Locks intruder snowey Snow White free-loader rzull Repun Zell tower The "list" statement is covered in Section 7.8. 4.2.2.5. Example Module These statements are combined to define the module: Bjorklund Expires November 6, 2008 [Page 17] Internet-Draft YANG May 2008 // Contents of "acme-system.yang" module acme-system { namespace "http://acme.example.com/system"; prefix "acme"; organization "ACME Inc."; contact "joe@acme.example.com"; description "The module for entities implementing the ACME system."; revision 2007-06-09 { description "Initial revision."; } container system { leaf host-name { type string; description "Hostname for this system"; } leaf-list domain-search { type string; description "List of domain names to search"; } container login { leaf message { type string; description "Message given at start of login session"; } list user { key "name"; leaf name { type string; } leaf full-name { type string; } leaf class { type string; } } } } } Bjorklund Expires November 6, 2008 [Page 18] Internet-Draft YANG May 2008 4.2.3. Operational Data YANG can model operational data, as well as configuration data, based on the "config" statement. When a node is tagged with "config false", its subhierarchy is flagged as operational data, to be reported using NETCONF's operation, not the operation. Parent containers, lists, and key leafs are reported also, giving the context for the operational data. In this example, two leafs are defined for each interface, a configured speed and an observed speed. The observed speed is not configuration, so it can be returned with NETCONF operations, but not with operations. The observed speed is not configuration data, and cannot be manipulated using . list interface { key "name"; config true; leaf name { type string; } leaf speed { type enumeration { enum 10m; enum 100m; enum auto; } } leaf observed-speed { type uint32; config false; } } 4.2.4. Built-in Types YANG has a set of built-in types, similar to those of many programming languages, but with some differences due to special requirements from the management information model. The following table summarizes the built-in types discussed in Section 8: Bjorklund Expires November 6, 2008 [Page 19] Internet-Draft YANG May 2008 +---------------------+-------------+-------------------------------+ | Name | Type | Description | +---------------------+-------------+-------------------------------+ | int8 | Number | 8-bit signed integer | | int16 | Number | 16-bit signed integer | | int32 | Number | 32-bit signed integer | | int64 | Number | 64-bit signed integer | | uint8 | Number | 8-bit unsigned integer | | uint16 | Number | 16-bit unsigned integer | | uint32 | Number | 32-bit unsigned integer | | uint64 | Number | 64-bit unsigned integer | | float32 | Number | 32-bit IEEE floating point | | | | real number | | float64 | Number | 64-bit IEEE floating point | | | | real number | | string | Text | Human readable string | | boolean | Text | "true" or "false" | | enumeration | Text/Number | Enumerated strings with | | | | associated numeric values | | bits | Text/Number | A set of bits or flags | | binary | Text | Any binary data | | keyref | Text/Number | A reference to a list's key | | | | value | | empty | Empty | A leaf that does not have any | | | | value | | union | Text/Number | Choice of member types | | instance-identifier | Text | References a data tree node | +---------------------+-------------+-------------------------------+ The "type" statement is covered in Section 8. 4.2.5. Derived Types (typedef) YANG can define derived types from base types using the "typedef" statement. A base type can be either a built-in type or a derived type, allowing a hierarchy of derived types. A derived type can be used as the argument for the "type" statement. YANG Example: Bjorklund Expires November 6, 2008 [Page 20] Internet-Draft YANG May 2008 typedef percent { type uint16 { range "0 .. 100"; } description "Percentage"; } leaf completed { type percent; } NETCONF XML Encoding: 20 The "typedef" statement is covered in Section 7.3. 4.2.6. Reusable Node Groups (grouping) Groups of nodes can be assembled into the equivalent of complex types using the "grouping" statement. "grouping" defines a set of nodes that are instantiated with the "uses" statement: grouping target { leaf address { type inet:ip-address; description "Target IP address"; } leaf port { type inet:port-number; description "Target port number"; } } container peer { container destination { uses target; } } NETCONF XML Encoding:
192.0.2.1
830
Bjorklund Expires November 6, 2008 [Page 21] Internet-Draft YANG May 2008 The grouping can be refined as it is used, allowing certain statements to be overridden. In this example the description is refined: container connection { container source { uses target { leaf address { description "Source IP address"; } leaf port { description "Source port number"; } } } container destination { uses target { leaf address { description "Destination IP address"; } leaf port { description "Destination port number"; } } } } The "grouping" statement is covered in Section 7.11. 4.2.7. Choices YANG allows the data model to segregate incompatible nodes into distinct choices using the "choice" and "case" statements. The "choice" statement contains a set of "case" statements which define sets of schema nodes that cannot appear together. Each "case" may contain multiple nodes, but each node may appear in only one "case" under a "choice". When an element from one case is created, all elements from all other cases are implicitly deleted. The device handles the enforcement of the constraint, preventing incompatibilities from existing in the configuration. The choice and case nodes appear only in the schema tree, not in the data tree or XML encoding. The additional levels of hierarchy are not needed beyond the conceptual schema. YANG Example: Bjorklund Expires November 6, 2008 [Page 22] Internet-Draft YANG May 2008 choice snack { mandatory true; case sports-arena { leaf pretzel { type empty; } leaf beer { type empty; } } case late-night { leaf chocolate { type enumeration { enum dark; enum milk; enum first-available; } } } } NETCONF XML Encoding: first-available The "choice" statement is covered in Section 7.9. 4.2.8. Extending Data Models (augment) YANG allows a module to insert additional nodes into data models, including both the current module (and its submodules) or an external module. This is useful e.g. for vendors to add vendor-specific parameters to standard data models in an interoperable way. The "augment" statement defines the location in the data model hierarchy where new nodes are inserted, and the "when" statement defines the conditions when the new nodes are valid. YANG Example: augment system/login/user { when "class != 'wheel'"; leaf uid { type uint16 { range "1000 .. 30000"; } } } Bjorklund Expires November 6, 2008 [Page 23] Internet-Draft YANG May 2008 This example defines a "uid" node that only is valid when the user's "class" is not "wheel". If a module augments another model, the XML representation of the data will reflect the prefix of the augmenting model. For example, if the above augmentation were in a module with prefix "other", the XML would look like: NETCONF XML Encoding: alicew Alice N. Wonderland drop-out 1024 The "augment" statement is covered in Section 7.15. 4.2.9. RPC Definitions YANG allows the definition of NETCONF RPCs. The method names, input parameters and output parameters are modeled using YANG data definition statements. YANG Example: rpc activate-software-image { input { leaf image-name { type string; } } output { leaf status { type string; } } } NETCONF XML Encoding: Bjorklund Expires November 6, 2008 [Page 24] Internet-Draft YANG May 2008 acmefw-2.3 The image acmefw-2.3 is being installed. The "rpc" statement is covered in Section 7.13. 4.2.10. Notification Definitions YANG allows the definition of notifications suitable for NETCONF. YANG data definition statements are used to model the content of the notification. YANG Example: notification link-failure { description "A link failure has been detected"; leaf if-index { type int32 { range "1 .. max"; } } leaf if-name { type keyref { path "/interfaces/interface/name"; } } } NETCONF XML Encoding: 2007-09-01T10:00:00Z so-1/2/3.0 Bjorklund Expires November 6, 2008 [Page 25] Internet-Draft YANG May 2008 The "notification" statement is covered in Section 7.14. Bjorklund Expires November 6, 2008 [Page 26] Internet-Draft YANG May 2008 5. Language Concepts 5.1. Modules and Submodules The module is the base unit of definition in YANG. A module defines a single data model. A module can define a complete, cohesive model, or augment an existing data model with additional nodes. A NETCONF server may implement a number of modules, allowing multiple views of the same data, or multiple views of disjoint subsections of the device's data. Alternatively, the server may implement only one module that defines all available data. Any modules that are implemented MUST be available for all defined datastores. A module may be divided into submodules, based on the needs of the module owner. The external view remains that of a single module, regardless of the presence or size of its submodules. A module uses the "include" statement to include its submodules, and the "import" statement to reference external modules. Similarly, a submodule may use the "import" statement to reference other modules, and may use the "include" statement to reference other submodules within its module. A module or submodule may not include submodules from other modules, nor may a submodule import its own module. The names of all standard modules must be unique, but different revisions of the same module should have the same name. Developers of enterprise modules are encouraged to choose names for their modules that will have a low probability of colliding with standard or other enterprise modules, e.g., by using the enterprise or organization name as a prefix. 5.1.1. Module Hierarchies YANG allows modeling of data in multiple hierarchies, where data may have more than one root node. While it is recommended to use a model with a single root node, models that have multiple roots nodes are sometimes convenient, and are supported by YANG. Due to the possibility of multiple roots the modeled data does not necessarily map to a well-formed XML document. Often a conceptual root node (e.g. or element in NETCONF RPCs) is added to overcome this problem. 5.2. File Layout YANG modules and submodules are typically stored in files, one module or submodule per file, with the name of the file given by the Bjorklund Expires November 6, 2008 [Page 27] Internet-Draft YANG May 2008 concatenation of the module or submodule name and the file suffix ".yang". YANG compilers can find imported modules and included submodules via this convention. While the YANG language defines modules, tools may compile submodules independently for performance and manageability reasons. Many errors and warnings that cannot be detected during submodule compilation may be delayed until the submodules are linked into a cohesive module. 5.3. Object Based View of YANG While YANG models the configuration as a data tree, it can be used in an object-based manner as well. The configuration and state data of the device is modeled as a tree of object instances (objects for short). Each object in the tree has a type name (or managed object class name), a namespace, a (possibly empty) set of attributes and a (possibly empty) set of child objects. A managed object class could be defined as a grouping, containing just one list. Attributes should be defined as leafs inside the list. Child objects should be defined with the corresponding uses statements. A defined grouping unambiguously defines its properties, it has its own unique name, so when it is referred to in the "uses" statement it is always the same well defined set of properties that we are using. The data tree can be defined as one or more top level containers containing managed object classes defined as groupings. All further levels of the data tree are defined by managed object classes containing further managed objects. 5.4. XML Namespaces All YANG definitions are specified within a particular XML Namespace. Each module defines an XML namespace as a globally unique URI [RFC3986]. A NETCONF client or server uses the namespace during XML encoding of data. The namespace URI is advertised as a capability in the NETCONF message to indicate support for the YANG module by a NETCONF server. Namespaces for standard module names will be assigned by IANA. They MUST be unique (but different revisions of the same module should have the same namespace). Namespaces for private module names will be assigned by the Bjorklund Expires November 6, 2008 [Page 28] Internet-Draft YANG May 2008 organization owning the module without a central registry. It is recommended to choose namespaces that will have a low probability of colliding with standard or other enterprise modules, e.g. by using the enterprise or organization name in the namespace. The "namespace" statement is covered in Section 7.1.3. 5.4.1. YANG Namespace YANG defines its own namespace for NETCONF operations. This namespace is "urn:ietf:params:xml:ns:yang:1" [XXX IANA]. 5.5. Ordering YANG supports two styles for ordering the entries within a list. In many lists, the order of list entries does not impact the implementation of the list's configuration, and the device is free to sort the list entries in any reasonable order. The "description" string for the list may suggest an order. YANG calls this style of list "system ordered" and they are indicated with the statement "ordered-by system". For example, a list of valid users would typically be sorted alphabetically, since the order in which the users appeared in the configuration would not impact the creation of those users' accounts. In the other style of lists, the order of list entries matters for the implementation of the list's configuration and the user is responsible for ordering the entries, while the device maintains that order. YANG calls this style of list "user ordered" and they are indicated with the statement "ordered-by user". For example, the order in which firewall filters entries are applied to incoming traffic may affect how that traffic is filtered. The user would need to decide if the filter entry that discards all TCP traffic should be applied before or after the filter entry that allows all traffic from trusted interfaces. The choice of order would be crucial. YANG provides a rich set of facilities within NETCONF's operation which allow the order of list entries in user-ordered lists to be controlled. List entries may be inserted or rearranged, positioned as the first or last entry in the list, or positioned before or after another specific entry. The "ordered-by" statement is covered in Section 7.7.4. Bjorklund Expires November 6, 2008 [Page 29] Internet-Draft YANG May 2008 5.6. Containers with Presence YANG supports two styles of containers, those which exist only for organizing the hierarchy of data nodes, and those whose presence in the configuration has an explicit meaning. In the first style, the container has no meaning of its own, existing only to contain child nodes. The container data node is implicitly created when the first child data node is created. The data node is implicitly deleted when the last non-key child is deleted, since an empty container has no meaning. For example, the set of scrambling options for SONET interfaces may be placed inside a "scrambling" container to enhance the organization of the configuration hierarchy, and to keep these nodes together. The "scrambling" node itself has no meaning, so removing the node when it becomes empty relieves the user from the task of performing this task. In the second style, the presence of the container itself is configuration data, representing a single bit of configuration data. The container acts as both a configuration knob and a means of organizing related configuration. These containers are explicitly created and deleted. YANG calls this style a "presence container" and they are indicated using the "presence" statement, which takes as its argument a text string indicating what the presence of the node means. For example, an "ssh" container may turn on the ability to log into the device using ssh, but can also contain any ssh-related configuration knobs, such as connection rates or retry limits. The "presence" statement is covered in Section 7.5.4. 5.7. Scoping YANG uses static scoping. Grouping definitions are resolved in the context in which they are defined, rather than the context in which they are used. Users of groupings are not required to import modules or include submodules to satisfy all references made by the grouping. For example, if a module defines a grouping in which a type is referenced, when the grouping is used in a second module, the type is resolved in the original module, not the second module. There is no worry over conflicts if both modules define the type, since there is no ambiguity. Bjorklund Expires November 6, 2008 [Page 30] Internet-Draft YANG May 2008 5.8. Nested Typedefs and Groupings Typedefs and groupings may appear nested under many YANG statements, allowing these to be lexically scoped by the hierarchy under which they appear. This allows types and groupings to be defined near where they are used, rather than placing them at the top level of the hierarchy. The close proximity increases readability. Scoping also allows types to be defined without concern for naming conflicts between types in different submodules. Type names can be specified without adding leading strings designed to prevent name collisions within large modules. Finally, scoping allows the module author to keep types and groupings private to their module or submodule, preventing their reuse. Since only top-level types and groupings can be used outside the module or submodule, the developer has more control over what pieces of their module are presented to the outside world, supporting the need to hide internal information and maintaining a boundary between what is shared with the outside world and what is kept private. Scoped definitions MUST NOT shadow definitions at a higher scope. A type or group cannot be defined if a higher level in the schema hierarchy has a definition with a matching identifier. When a YANG implementation resolves a reference to an unprefixed type or grouping, it searches up the levels of hierarchy in the schema tree, starting at the current level, for the definition of the type or grouping. Bjorklund Expires November 6, 2008 [Page 31] Internet-Draft YANG May 2008 6. YANG syntax The YANG syntax is similar to that of SMIng [RFC3780] and programming languages like C and C++. This C-like syntax was chosen specifically for its readability, since YANG values the time and effort of the readers of models above those of modules writers and YANG tool-chain developers. This section introduces the YANG syntax. YANG modules are written in the UTF-8 [RFC3629] character set. 6.1. Lexicographical Tokenization YANG modules are parsed as a series of tokens. This section details the rules for recognizing tokens from an input stream. YANG tokenization rules are both simple and powerful. The simplicity is driven by a need to keep the parsers easy to implement, while the power is driven by the fact that modelers need to express their models in readable formats. 6.1.1. Comments Comments are C++ style. A single line comment starts with "//" and ends at the end of the line. A block comment is enclosed within "/*" and "*/". 6.1.2. Tokens A token in YANG is either a keyword, a string, ";", "{", or "}". A string can be quoted or unquoted. A keyword is either one of the core YANG keywords defined in this document, or a prefix identifier, followed by ":", followed by a language extension keyword. Keywords are case sensitive. See Section 6.2 for a formal definition of identifiers. 6.1.3. Quoting If a string contains any whitespace characters, a semicolon (";"), curly braces ("{ }"), or comment sequences ("//", "/*", or "*/"), then it MUST be enclosed within double or single quotes. If the double quoted string contains a line break followed by whitespace which is used to indent the text according to the layout in the YANG file, this leading whitespace is stripped from the string, up to at most the same column of the double quote character. If the double quoted string contains whitespace before a line break, this trailing whitespace is stripped from the string. Bjorklund Expires November 6, 2008 [Page 32] Internet-Draft YANG May 2008 A single quoted string (enclosed within ' ') preserves each character within the quotes. A single quote character can not occur in a single quoted string, even when preceded by a backslash. If a quoted string is followed by a plus character ("+"), followed by another quoted string, the two strings are concatenated into one quoted string, allowing multiple concatenations to build one quoted string. Whitespace trimming of double quoted strings is done before concatenation. Within a double quoted string (enclosed within " "), a backslash character introduces a special character, which depends on the character that immediately follows the backslash: \n new line \t a tab character \" a double quote \\ a single backslash 6.1.3.1. Quoting Examples The following strings are equivalent: hello "hello" 'hello' "hel" + "lo" 'hel' + "lo" The following examples show some special strings: "\"" - string containing a double quote '"' - string containing a double quote "\n" - string containing a newline character '\n' - string containing a backslash followed by the character n The following examples show some illegal strings: '''' - a single-quoted string cannot contain single quotes """ - a double quote must be escaped in a double quoted string The following strings are equivalent: "first line second line" "first line\n" + " second line" Bjorklund Expires November 6, 2008 [Page 33] Internet-Draft YANG May 2008 6.2. Identifiers Identifiers are used to identify different kinds of YANG items by name. Each identifier starts with an upper-case or lower-case ASCII letter or an underscore character, followed by zero or more ASCII letters, digits, underscore characters, hyphens, and dots. Implementations MUST support identifiers up to 63 characters in length. Identifiers are case sensitive. The identifier syntax is formally defined by the rule "identifier" in Appendix D. Identifiers can be specified as quoted or unquoted strings. 6.2.1. Identifiers and their namespaces Each identifier is valid in a namespace which depends on the type of the YANG item being defined: o All module and submodule names share the same global module identifier namespace. o All extension names defined in a module and its submodules share the same extension identifier namespace. o All derived type names defined within a parent node or at the top- level of the module or its submodules share the same type identifier namespace. This namespace is scoped to the parent node or module. o All groupings defined within a parent node or at the top-level of the module or its submodules share the same grouping identifier namespace. This namespace is scoped to the parent node or module. o All leafs, leaf-lists, lists, containers, choices, rpcs, and notifications defined within a parent node or at the top-level of the module or its submodules share the same identifier namespace. This namespace is scoped to the parent node or module, unless the parent node is a case node. In that case, the namespace is scoped to the parent node of the case node's parent choice node. o All cases within a choice share the same case identifier namespace. This namespace is scoped to the parent choice node. All identifiers defined in a namespace MUST be unique. 6.3. Statements A YANG module contains a sequence of statements. Each statement starts with a keyword, followed by zero or one argument, followed either by a semicolon (";") or a block of substatements enclosed Bjorklund Expires November 6, 2008 [Page 34] Internet-Draft YANG May 2008 within curly braces ("{ }"): statement = keyword [argument] (";" / "{" *statement "}") The argument is a string, as defined in Section 6.1.2. 6.3.1. Language Extensions A module can introduce YANG extensions by using the "extension" keyword (see Section 7.16). The extensions can be imported by other modules with the "import" statement (see Section 7.1.5). When an imported extension is used, the keyword must be qualified using the prefix with which the extension's module was imported. 6.4. XPath Evaluations YANG relies on XPath as a notation for specifying many inter-node references and dependencies. NETCONF clients and servers are not required to implement an XPath interpreter, but MUST ensure that the requirements encoded in the data model are enforced. The manner of enforcement is an implementation decision. The XPath expressions MUST be valid, but any implementation may choose to implement them by hand, rather than using the XPath expression directly. XPath expressions are evaluated in the context of the current node, with the namespace of the current module defined as the null namespace. References to identifiers in external modules MUST be qualified with appropriate prefixes, and references to the current module and its submodules MAY use a prefix. Bjorklund Expires November 6, 2008 [Page 35] Internet-Draft YANG May 2008 7. YANG Statements The following sections describe all of the YANG core statements. Note that even a statement which does not have any substatements defined in core YANG can have vendor-specific extensions as substatements. For example, the "description" statement does not have any substatements defined in core YANG, but the following is legal: description "some text" { acme:documentation-flag 5; } 7.1. The module Statement The "module" statement defines the module's name, and groups all statements which belong to the module together. The "module" statement's argument is the name of the module, followed by a block of substatements that hold detailed module information. The module name follows the rules for identifiers in Section 6.2. Standard module names will be assigned by IANA. The names of all standard modules MUST be unique (but different revisions of the same module should have the same name). Private module names will be assigned by the organization owning the module without a central registry. It is recommended to choose names for their modules that will have a low probability of colliding with standard or other enterprise modules, e.g. by using the enterprise or organization name as a prefix. A module SHOULD have the following layout: Bjorklund Expires November 6, 2008 [Page 36] Internet-Draft YANG May 2008 module { // header information // linkage statements // meta information // revision history // module definitions } 7.1.1. The module's Substatements Bjorklund Expires November 6, 2008 [Page 37] Internet-Draft YANG May 2008 +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | choice | 7.9 | 0..n | | contact | 7.1.8 | 0..1 | | container | 7.5 | 0..n | | description | 7.17.3 | 0..1 | | extension | 7.16 | 0..n | | grouping | 7.11 | 0..n | | import | 7.1.5 | 0..n | | include | 7.1.6 | 0..n | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | namespace | 7.1.3 | 1 | | notification | 7.14 | 0..n | | organization | 7.1.7 | 0..1 | | prefix | 7.1.4 | 1 | | reference | 7.17.4 | 0..1 | | revision | 7.1.9 | 0..n | | rpc | 7.13 | 0..n | | typedef | 7.3 | 0..n | | uses | 7.12 | 0..n | | yang-version | 7.1.2 | 0..1 | +--------------+---------+-------------+ 7.1.2. The yang-version Statement The "yang-version" statement specifies which version of the YANG language was used in developing the module. The statement's argument contains value "1", which is the current yang version and the default value. This statement is intended for future-proofing the syntax of YANG against possible changes in later versions of YANG. Since the current version is the default value, the statement need not appear in YANG modules until a future version is defined. When a new version is defined, YANG modules can either use version 2 features and add the "yang-version 2" statement, or remain within the version 1 feature set and continue to use the default setting of "yang- version 1". 7.1.3. The namespace Statement The "namespace" statement defines the XML namespace for all XML elements defined by the module. Its argument is the URI of the Bjorklund Expires November 6, 2008 [Page 38] Internet-Draft YANG May 2008 namespace. The namespace URI is advertised as a capability in the NETCONF message to indicate support for the YANG module by a NETCONF server. The capability URI advertised SHOULD be on the form: namespace-uri "?" revision Where "revision" is the revision of the module (see Section 7.1.9) that the server implements. See also Section 5.4. 7.1.4. The prefix Statement The "prefix" statement is used to define the prefix associated with the namespace of a module. The "prefix" statement's argument is the prefix string which is used as a prefix to access a module. The prefix string may be used to refer to definitions contained in the module, e.g. "if:ifName". A prefix follows the same rules as an identifier (see Section 6.2). When used inside the "module" statement, the "prefix" statement defines the prefix to be used when this module is imported. To improve readability of the NETCONF XML, a NETCONF client or server which generates XML or XPath that use prefixes, the prefix defined by a module SHOULD be used, unless there is a conflict. When used inside the "import" statement, the "prefix" statement defines the prefix to be used when accessing data inside the imported module. When a reference to an identifier from the imported module is used, the prefix string for the module from which objects are being imported is used in combination with a colon (":") and the identifier, e.g. "if:ifIndex". To improve readability of YANG modules, the prefix defined by a module SHOULD be used when the module is imported, unless there is a conflict. All prefixes, including the prefix for the module itself MUST be unique within the module or submodule. 7.1.5. The import Statement The "import" statement makes content from one module available inside another module or submodule. The argument is the name of the module to import, and the statement is followed by a block of substatements that holds detailed import information. All identifiers contained in an imported module are imported into the Bjorklund Expires November 6, 2008 [Page 39] Internet-Draft YANG May 2008 current module or submodule, so that they can be referenced by definitions in the current module or submodule. The mandatory "prefix" substatement assigns a prefix for the imported module which is scoped to the importing module or submodule. Multiple "import" statements may be specified to import from different modules. +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | prefix | 7.1.4 | 1 | +--------------+---------+-------------+ 7.1.6. The include Statement The "include" statement is used to make content from a submodule available to the module. The argument is an identifier which is the name of the submodule to include. Modules are only allowed to include submodules that belong to that module, as defined by the "belongs-to" statement (see Section 7.2.2). 7.1.7. The organization Statement The "organization" statement defines the party responsible for this module. The argument is a string which is used to specify a textual description of the organization(s) under whose auspices this module was developed. 7.1.8. The contact Statement The "contact" statement provides contact information for the module. The argument is a string which is used to specify the name, postal address, telephone number, and electronic mail address of the person to whom technical queries concerning this module should be sent. 7.1.9. The revision Statement The "revision" statement specifies the editorial revision history of the module, including the initial revision. A series of revisions statements detail the changes in the module's definition. The argument is a date string in the format "YYYY-MM-DD", followed by a block of substatements that holds detailed revision information. A module SHOULD have at least one initial "revision" statement. For every editorial change, a new one SHOULD be added in front of the revisions sequence, so that all revisions are in reverse chronological order. Bjorklund Expires November 6, 2008 [Page 40] Internet-Draft YANG May 2008 7.1.9.1. The revision's Substatement +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | description | 7.17.3 | 0..1 | +--------------+---------+-------------+ 7.1.10. Usage Example module acme-system { namespace "http://acme.example.com/system"; prefix "acme"; import yang-types { prefix "yang"; } include acme-types; organization "ACME Inc."; contact "Joe L. User ACME, Inc. 42 Anywhere Drive Nowhere, CA 95134 USA Phone: +1 800 555 0815 EMail: joe@acme.example.com"; description "The module for entities implementing the ACME protocol."; revision "2007-06-09" { description "Initial revision."; } // definitions follows... } 7.2. The submodule Statement While the primary unit in YANG is a module, a YANG module can itself be constructed out of several submodules. Submodules allow to split a complex module in several pieces where all the submodules contribute to a single namespace, which is defined by the module Bjorklund Expires November 6, 2008 [Page 41] Internet-Draft YANG May 2008 including the submodules. The "submodule" statement is used to give the submodule a name, and to group all statements which belong to the submodule together. The "submodule" statement, which must be present at most once, takes as an argument an identifier which is the name of the submodule, followed by a block of substatements that hold detailed submodule information. Standard submodule names will be assigned by IANA. Name of all standard submodules must be unique and in addition not conflict with module names (but different revisions of the same submodule should have the same name). Private submodule names will be assigned by the organization owning the submodule without a central registry. It is recommended to choose names for their submodules that will have a low probability of colliding with standard or other enterprise modules and submodules, e.g. by using the enterprise or organization name as a prefix. A submodule SHOULD have the following layout: submodule { Bjorklund Expires November 6, 2008 [Page 42] Internet-Draft YANG May 2008 // module identification // linkage statements // meta information // revision history // module definitions } 7.2.1. The submodule's Substatements Bjorklund Expires November 6, 2008 [Page 43] Internet-Draft YANG May 2008 +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | belongs-to | 7.2.2 | 1 | | choice | 7.9 | 0..n | | contact | 7.1.8 | 0..1 | | container | 7.5 | 0..n | | description | 7.17.3 | 0..1 | | extension | 7.16 | 0..n | | grouping | 7.11 | 0..n | | import | 7.1.5 | 0..n | | include | 7.1.6 | 0..n | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | notification | 7.14 | 0..n | | organization | 7.1.7 | 0..1 | | reference | 7.17.4 | 0..1 | | revision | 7.1.9 | 0..n | | rpc | 7.13 | 0..n | | typedef | 7.3 | 0..n | | uses | 7.12 | 0..n | | yang-version | 7.1.2 | 0..1 | +--------------+---------+-------------+ 7.2.2. The belongs-to Statement The "belongs-to" statement specifies the module to which the submodule belongs. The argument is an identifier which is the name of the module. Only the module to which a submodule belongs, or another submodule that belongs to the same module, are allowed to include that submodule. Bjorklund Expires November 6, 2008 [Page 44] Internet-Draft YANG May 2008 7.2.3. Usage Example submodule acme-types { belongs-to "acme-system"; import yang-types { prefix "yang"; } organization "ACME Inc."; contact "Joe L. User ACME, Inc. 42 Anywhere Drive Nowhere, CA 95134 USA Phone: +1 800 555 0815 EMail: joe@acme.example.com"; description "This submodule defines common ACME types."; revision "2007-06-09" { description "Initial revision."; } // definitions follows... } 7.3. The typedef Statement The "typedef" statement defines a new type which may be used locally in the module, in modules or submodules which include it, and by other modules which import from it. The new type is called the "derived type", and the type from which it was derived is called the "base type". All derived types can be traced back to a YANG built-in type. The "typedef" statement's argument is an identifier which is the name of the type to be defined, and MUST be followed by a block of substatements that holds detailed typedef information. The name of the type MUST NOT be one of the YANG built-in types. If the typedef is defined at the top level of a YANG module or submodule, the name of the type to be defined MUST be unique within Bjorklund Expires November 6, 2008 [Page 45] Internet-Draft YANG May 2008 the module. For details about scoping for nested typedef, see Section 5.8. 7.3.1. The typedef's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | default | 7.3.4 | 0..1 | | description | 7.17.3 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | type | 7.3.2 | 1 | | units | 7.3.3 | 0..1 | +--------------+---------+-------------+ 7.3.2. The typedef's type Statement The "type" statement, which must be present, defines the base type from which this type is derived. See Section 7.4 for details. 7.3.3. The units Statement The "units" statement, which is optional, takes as an argument a string which contains a textual definition of the units associated with the type. 7.3.4. The typedef's default Statement The "default" statement takes as an argument a string which contains a default value for the new type. The value of the "default" statement MUST correspond to the type specified in the "type" statement. If the base type has a default value, and the new derived type does not specify a new default value, the base type's default value is also the default value of the new derived type. The default value MUST correspond to any restrictions in the derived type. If the base type's default value does not correspond to the new restrictions, the derived type MUST define a new default value. Bjorklund Expires November 6, 2008 [Page 46] Internet-Draft YANG May 2008 7.3.5. Usage Example typedef listen-ipv4-address { type inet:ipv4-address; default "0.0.0.0"; } 7.4. The type Statement The "type" statement takes as an argument a string which is the name of a YANG built-in type (see Section 8) or a derived type (see Section 7.3), followed by an optional block of substatements that are used to put further restrictions on the type. The restrictions that can be applied depends on the type being restricted. All restriction statements are described in conjunction with the built-in types in Section 8. 7.4.1. The type's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | bit | 8.6.3 | 0..n | | enum | 8.5.3 | 0..n | | length | 8.3.3 | 0..1 | | path | 8.8.2 | 0..1 | | pattern | 8.3.4 | 0..1 | | range | 8.1.3 | 0..1 | | type | 7.4 | 0..n | +--------------+---------+-------------+ 7.5. The container Statement The "container" statement is used to define an interior node in the schema tree. It takes one argument, which is an identifier, followed by a block of substatements that holds detailed container information. A container node does not have a value, but it has a list of child nodes in the data tree. The child nodes are defined in the container's substatements. By default, a container does not carry any information, but is used to organize and give structure to the data being defined. The "presence" statement (see Section 7.5.4) is used to give semantics to the existence of the container in the data tree. Bjorklund Expires November 6, 2008 [Page 47] Internet-Draft YANG May 2008 7.5.1. The container's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | choice | 7.9 | 0..n | | config | 7.17.1 | 0..1 | | container | 7.5 | 0..n | | description | 7.17.3 | 0..1 | | grouping | 7.11 | 0..n | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | must | 7.5.2 | 0..n | | presence | 7.5.4 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | typedef | 7.3 | 0..n | | uses | 7.12 | 0..n | +--------------+---------+-------------+ 7.5.2. The must Statement The "must" statement, which is optional, takes as an argument a string which contains an XPath expression. It is used to formally declare a constraint on the configuration data. When a configuration datastore is validated, all "must" constraints are conceptually evaluated once for each corresponding instance in the datastore's data tree, and for all leafs with default values in effect. If an instance does not exist in the data tree, and it does not have a default value, its "must" statements are not evaluated. Within a "must" expression, All such constraints MUST evaluate to true for the configuration to be valid. The "must" statement is ignored if the data does not represent configuration. The XPath expression is conceptually evaluated in the following context: o The context node is the node in the data tree for which the "must" statement is defined. Bjorklund Expires November 6, 2008 [Page 48] Internet-Draft YANG May 2008 o The accessible tree is made up of all nodes in the data tree, and all leafs with default values. o The set of namespace declarations is the set of all "import" statements' prefix and namespace pairs, and the "prefix" statement's prefix for the "namespace" statement's URI. o The null namespace is defined to be the namespace of the current module. o One variable "this", which is the context node, is defined. The result of the XPath expression is converted to a boolean value using the standard XPath rules. Note that the XPath expression is conceptually evaluated. This means that an implementation does not have to use an XPath evaluator on the device. How the evaluation is done in practice is an implementation decision. 7.5.3. The must's Substatements +---------------+---------+-------------+ | substatement | section | cardinality | +---------------+---------+-------------+ | description | 7.17.3 | 0..1 | | error-app-tag | 7.5.3.2 | 0..1 | | error-message | 7.5.3.1 | 0..1 | | reference | 7.17.4 | 0..1 | +---------------+---------+-------------+ 7.5.3.1. The error-message Statement The "error-message" statement, which is optional, takes a string as an argument. If the constraint evaluates to false, the string is passed as in the . 7.5.3.2. The error-app-tag Statement The "error-app-tag" statement, which is optional, takes a string as an argument. If the constraint evaluates to false, the string is passed as in the . Bjorklund Expires November 6, 2008 [Page 49] Internet-Draft YANG May 2008 7.5.3.3. Usage Example of must and error-message container interface { leaf ifType { type enumeration { enum ethernet; enum atm; } } leaf ifMTU { type uint32; } must "ifType != 'ethernet' or " + "(ifType = 'ethernet' and ifMTU = 1500)" { error-message "An ethernet MTU must be 1500"; } must "ifType != 'atm' or " + "(ifType = 'atm' and ifMTU <= 17966 and ifMTU >= 64)" { error-message "An atm MTU must be 64 .. 17966"; } } 7.5.4. The presence Statement The "presence" statement assigns a meaning to the presence of a container in the data tree. It takes as an argument a string which contains a textual description of what the node's presence means. If a container has the "presence" statement, the container's existence in the data tree carries some meaning. Otherwise, the container is used to give some structure to the data, and it carries no meaning by itself. See Section 5.6 for additional information. 7.5.5. The container's Child Node Statements Within a container, the "container", "leaf", "list", "leaf-list", "uses", and "choice" statements can be used to define child nodes to the container. 7.5.6. XML Encoding Rules A container node is encoded as an XML element. The element's name is the container's identifier, and its XML namespace is the module's XML namespace. The container's child nodes are encoded as subelements to the Bjorklund Expires November 6, 2008 [Page 50] Internet-Draft YANG May 2008 container element, in the same order as they are defined within the container statement. A NETCONF server that replies to a or request MAY choose not to send a container element if the container node does not have the "presence" statement and no child nodes exist. Thus, a client that receives an for a or request, must be prepared to handle the case that a container node without a presence statement is not present in the XML. 7.5.7. NETCONF Operations When a NETCONF server processes an request, the elements of procedure for the container node are: If the operation is "merge" the node is created if it does not exist. If the operation is "replace" and the node exists, all child nodes not present in the XML are deleted, and child nodes present in the XML but not present in the datastore are created. If the operation is "create" the node is created if it does not exist. If the operation is "delete" the node is deleted if it exists. If the container has a "presence" statement, it may be implicitly created if it does not exist, even if the operation is "none". If a container has a "presence" statement and the last child node is deleted, the NETCONF server MAY delete the container. 7.5.8. Usage Example Given the following container definition: container system { description "Contains various system parameters"; container services { description "Configure externally available services"; container "ssh" { presence "Enables SSH"; description "SSH service specific configuration"; // more leafs, containers and stuff here... } } } Bjorklund Expires November 6, 2008 [Page 51] Internet-Draft YANG May 2008 A corresponding XML encoding would look like this: Since the element is present, ssh is enabled. To delete a container with an : 7.6. The leaf Statement The "leaf" statement is used to define a leaf node in the schema tree. It takes one argument, which is an identifier, followed by a block of substatements that holds detailed leaf information. A leaf node has a value, but no child nodes in the data tree. A leaf node exists in zero or one instances in the data tree, depending on the value of the "mandatory" statement. The "leaf" statement is used to define a scalar variable of a particular built-in or derived type. If a leaf has a "default" statement, the leaf's default value is set to the value of the "default" statement. Otherwise, if the leaf's type has a default value, and the leaf is not mandatory, then the leaf's default value is set to the type's default value. In all other cases, the leaf does not have a default value. Bjorklund Expires November 6, 2008 [Page 52] Internet-Draft YANG May 2008 If the leaf has a default value, the server MUST use this value internally if no value is provided by the NETCONF client when the instance is created. 7.6.1. The leaf's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | config | 7.17.1 | 0..1 | | default | 7.6.3 | 0..1 | | description | 7.17.3 | 0..1 | | mandatory | 7.6.4 | 0..1 | | must | 7.5.2 | 0..n | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | type | 7.6.2 | 1 | | units | 7.3.3 | 0..1 | +--------------+---------+-------------+ 7.6.2. The leaf's type Statement The "type" statement, which must be present, takes as an argument the name of an existing built-in or derived type. The optional substatements specify restrictions on this type. See Section 7.4 for details. 7.6.3. The leaf's default Statement The "default" statement, which is optional, takes as an argument a string which contains a default value for the leaf. The value of the "default" statement MUST correspond to the type specified in the leaf's "type" statement. The "default" statement MUST NOT be present on nodes where "mandatory" is true. 7.6.4. The leaf's mandatory Statement The "mandatory" statement, which is optional, takes as an argument the string "true" or "false". If "mandatory" is "true", the node must exist in a valid configuration if its parent node exists. Since containers without a "presence" statement are implicitly created and deleted when needed, they are ignored when performing mandatory tests for leafs. A mandatory leaf within such a container is mandatory even if the container's data node does not exist. Bjorklund Expires November 6, 2008 [Page 53] Internet-Draft YANG May 2008 If not specified, the default is "false". 7.6.5. XML Encoding Rules A leaf node is encoded as an XML element. The element's name is the leaf's identifier, and its XML namespace is the module's XML namespace. The value of the leaf node is encoded to XML according to the type, and sent as character data in the element. A NETCONF server that replies to a or request MAY choose not to send the leaf element if its value is the default value. Thus, a client that receives an for a or request, must be prepared to handle the case that a leaf node with a default value is not present in the XML. In this case, the value used by the server is known to be the default value. See Section 7.6.7 for an example. 7.6.6. NETCONF Operations When a NETCONF server processes an request, the elements of procedure for the leaf node are: If the operation is "merge", the node is created if it does not exist, and its value is set to the value found in the XML RPC data. If the operation is "replace", the node is created if it does not exist, and its value is set to the value found in the XML RPC data. If the operation is "create" the node is created if it does not exist. If the operation is "delete" the node is deleted if it exists. 7.6.7. Usage Example Given the following leaf statement: leaf port { type inet:port-number; default 22; description "The port which the SSH server listens to" } Bjorklund Expires November 6, 2008 [Page 54] Internet-Draft YANG May 2008 A corresponding XML encoding: 2022 To create a leaf with an edit-config: 2022 7.7. The leaf-list Statement Where the "leaf" statement is used to define a simple scalar variable of a particular type, the "leaf-list" statement is used to define an array of a particular type. The "leaf-list" statement takes one argument, which is an identifier, followed by a block of substatements that holds detailed leaf-list information. The values in a leaf-list MUST be unique. If the type referenced by the leaf-list has a default value, it has no effect in the leaf-list. Bjorklund Expires November 6, 2008 [Page 55] Internet-Draft YANG May 2008 7.7.1. The leaf-list's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | config | 7.17.1 | 0..1 | | description | 7.17.3 | 0..1 | | max-elements | 7.7.3 | 0..1 | | min-elements | 7.7.2 | 0..1 | | must | 7.5.2 | 0..n | | ordered-by | 7.7.4 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | type | 7.4 | 1 | | units | 7.3.3 | 0..1 | +--------------+---------+-------------+ 7.7.2. The min-elements Statement The "min-elements" statement, which is optional, takes as an argument a non-negative integer which puts a constraint on a valid configuration. A valid configuration always has at least min- elements values in the leaf-list or list. If no "min-elements" statement is present, it defaults to zero. 7.7.3. The max-elements Statement The "max-elements" statement, which is optional, takes as an argument a positive integer or the string "unbounded", which puts a constraint on a valid configuration. A valid configuration always has at most max-elements values in the leaf-list or list. If no "max-elements" statement is present, it defaults to "unbounded". 7.7.4. The ordered-by Statement The "ordered-by" statement defines whether the order of entries within a list are determined by the user or the system. The argument is one of the strings "system" or "user". If not present, order defaults to "system". See Section 5.5 for additional information. Bjorklund Expires November 6, 2008 [Page 56] Internet-Draft YANG May 2008 7.7.4.1. ordered-by system The entries in the list are sorted according to an unspecified order. Thus an implementation is free to sort the entries in the most appropriate order. An implementation SHOULD use the same order for the same data, regardless of how the data were created. Using a deterministic order will makes comparisons possible using simple tools like "diff". This is the default order. 7.7.4.2. ordered-by user The entries in the list are sorted according to an order defined by the user. This order is controlled by using special XML attributes in the request. See Section 7.7.6 for details. 7.7.5. XML Encoding Rules A leaf-list node is encoded as a series of XML elements. Each element's name is the leaf-list's identifier, and its XML namespace is the module's XML namespace. The value of the leaf-list node is encoded to XML according to the type, and sent as character data in the element. See Section 7.7.7 for an example. 7.7.6. NETCONF operations Leaf-list entries can be created and deleted, but not modified, through , by using the "operation" attribute in the leaf-list entry's XML element. In an "ordered-by user" leaf-list, the attributes "insert" and "value" in the YANG namespace (Section 5.4.1) can be used to control where in the leaf-list the entry is inserted. These can be used during "create" operations to insert a new leaf-list entry, or during "merge" or "replace" operations to insert a new leaf-list entry or move an existing one. The "insert" attribute can take the values "first", "last", "before", and "after". If the value is "before" or "after", the "value" attribute must also be used to specify an existing entry in the leaf- list. If no "insert" attribute is present in the "create" operation, it defaults to "last". Bjorklund Expires November 6, 2008 [Page 57] Internet-Draft YANG May 2008 In a , or an with a "replace" operation which covers the entire leaf-list, the leaf-list order is the same as the order of the XML elements in the request. When a NETCONF server processes an request, the elements of procedure for a leaf-list node are: If the operation is "merge" or "replace" the leaf-list entry is created if it does not exist. If the operation is "create" the leaf-list entry is created if it does not exist. If the operation is "delete" the entry is deleted from the leaf- list if it exists. 7.7.7. Usage Example leaf-list allow-user { type string; description "A list of user name patterns to allow"; } A corresponding XML encoding: alice bob To create a new element in the list: eric Bjorklund Expires November 6, 2008 [Page 58] Internet-Draft YANG May 2008 Given the following ordered-by user leaf-list: leaf-list ciphers { type string; ordered-by user; description "A list of ciphers"; } The following would be used to insert a new cipher "blowfish-cbc" after "3des-cbc": blowfish-cbc 7.8. The list Statement The "list" statement is used to define interior nodes in the schema tree. A list node may exist in multiple instances in the data tree. Each such instance is known as a list entry. The "list" statement takes one argument which is an identifier, followed by a block of substatements that holds detailed list information. A list entry is uniquely identified by the values of the list's keys. A list is similar to a table where each list entry is a row in the table. Bjorklund Expires November 6, 2008 [Page 59] Internet-Draft YANG May 2008 7.8.1. The list's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | choice | 7.9 | 0..n | | config | 7.17.1 | 0..1 | | container | 7.5 | 0..n | | description | 7.17.3 | 0..1 | | grouping | 7.11 | 0..n | | key | 7.8.2 | 0..1 | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | max-elements | 7.7.3 | 0..1 | | min-elements | 7.7.2 | 0..1 | | must | 7.5.2 | 0..n | | ordered-by | 7.7.4 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | typedef | 7.3 | 0..n | | unique | 7.8.3 | 0..n | | uses | 7.12 | 0..n | +--------------+---------+-------------+ 7.8.2. The list's key Statement The "key" statement, which MUST be present if the list represents configuration, and MAY be present otherwise, takes as an argument a string which specifies a space separated list of leaf identifiers of this list. A leaf identifier MUST NOT appear more than once in the key. The combined values of all the leafs specified in the key are used to uniquely identify a list entry. All key leafs MUST be given values when a list entry is created. Thus, any default values in the key leafs or their types are ignored. It also implies that any mandatory statement in the key leafs are ignored. A leaf that is part of the key can be of any built-in or derived type, except it MUST NOT be the built-in type "empty". All key leafs in a list MUST have the same value for their "config" as the list itself. The key string syntax is formally defined by the rule "key-arg" in Bjorklund Expires November 6, 2008 [Page 60] Internet-Draft YANG May 2008 Appendix D. 7.8.3. The lists's unique Statement The "unique" statement is used to put constraints on valid configurations. It takes as an argument a string which contains a space separated list of schema node identifiers, which MUST be given in the descendant form. Each such schema node identifier MUST refer to a leaf. In a valid configuration, the combined values of all the leaf instances specified in the string MUST be unique within all list entry instances. The unique string syntax is formally defined by the rule "unique-arg" in Appendix D. 7.8.3.1. Usage Example With the following list: list server { key "name"; unique "ip port"; leaf name { type string; } leaf ip { type inet:ip-address; } leaf port { type inet:port-number; } } The following configuration is not valid: smtp 192.0.2.1 25 http 192.0.2.1 25 Bjorklund Expires November 6, 2008 [Page 61] Internet-Draft YANG May 2008 7.8.4. The list's Child Node Statements Within a list, the "container", "leaf", "list", "leaf-list", "uses", and "choice" statements can be used to define child nodes to the list. 7.8.5. XML Encoding Rules A list is encoded as a series of XML elements, one for each entry in the list. Each element's name is the list's identifier, and its XML namespace is the module's XML namespace. The list's key nodes are encoded as subelements to the list's identifier element, in the same order as they are defined within the key statement. The rest of the list's child nodes are encoded as subelements to the list element, after the keys, in the same order as they are defined within the list statement. 7.8.6. NETCONF operations List entries can be created, deleted, replaced and modified through , by using the "operation" attribute in the list's XML element. In each case, the values of all keys are used to uniquely identify a list entry. If all keys are not specified for a list entry, a "missing-element" error is returned. In an "ordered-by user" list, the attributes "insert" and "key" in the YANG namespace (Section 5.4.1) can be used to control where in the list the entry is inserted. These can be used during "create" operations to insert a new list entry, or during "merge" or "replace" operations to insert a new list entry or move an existing one. The "insert" attribute can take the values "first", "last", "before", and "after". If the value is "before" or "after", the "key" attribute must also be used, to specify an existing element in the list. The value of the "key" attribute is the key predicates of the full instance identifier (see Section 8.11) for the list entry. If no "insert" attribute is present in the "create" operation, it defaults to "last". In a , or an with a "replace" operation which covers the entire list, the list entry order is the same as the order of the XML elements in the request. Bjorklund Expires November 6, 2008 [Page 62] Internet-Draft YANG May 2008 7.8.7. Usage Example Given the following list: list user { key "name"; config true; description "This is a list of users in the system."; leaf name { type string; } leaf type { type string; } leaf full-name { type string; } } A corresponding XML encoding: fred admin Fred Flintstone To create a new user "barney": barney admin Barney Rubble Bjorklund Expires November 6, 2008 [Page 63] Internet-Draft YANG May 2008 To change the type of "fred" to "superuser": fred superuser Given the following ordered-by user list: list user { description "This is a list of users in the system."; ordered-by user; config true; key "name"; leaf name { type string; } leaf type { type string; } leaf full-name { type string; } } The following would be used to insert a new user "barney" after the user "fred": Bjorklund Expires November 6, 2008 [Page 64] Internet-Draft YANG May 2008 barney admin Barney Rubble The following would be used to move the user "barney" before the user "fred": barney Bjorklund Expires November 6, 2008 [Page 65] Internet-Draft YANG May 2008 7.9. The choice Statement The "choice" statement defines a set of alternatives, only one of which may exist at any one time. The argument is an identifier, followed by a block of substatements that holds detailed choice information. The identifier is used to identify the choice node in the schema tree. A choice node does not exist in the data tree. A choice consists of a number of branches, defined with the case substatement. Each branch contains a number of child nodes. The "choice" statement puts a constraint on a valid configuration. In a valid configuration, the nodes from at most one of the choice's branches exist at the same time. If a choice is marked with "mandatory true", at least one node from one of the cases must be present in a valid configuration. See Section 4.2.7 for additional information. 7.9.1. The choice's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | case | 7.9.2 | 0..n | | container | 7.5 | 0..n | | default | 7.9.3 | 0..1 | | description | 7.17.3 | 0..1 | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | mandatory | 7.9.4 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | +--------------+---------+-------------+ 7.9.2. The choice's case Statement The "case" statement is used to define branches of the choice. It takes as an argument an identifier, followed by a block of substatements that holds detailed case information. The identifier is used to identify the case node in the schema tree. A case node does not exist in the data tree. Within a "case" statement, the "anyxml", "container", "leaf", "list", "leaf-list", "uses", and "augment" statements can be used to define Bjorklund Expires November 6, 2008 [Page 66] Internet-Draft YANG May 2008 child nodes to the case node. The identifiers of all these child nodes must be unique within all cases in a choice. For example, the following is illegal: choice interface-type { // This example is illegal YANG case a { leaf ethernet { ... } } case b { container ethernet { ...} } } As a shorthand, the "case" statement can be omitted if the branch contains a single "anyxml", "container", "leaf", "list", or "leaf- list" statement. In this case, the identifier of the case node is the same as the identifier in the branch statement. The following example: choice interface-type { container ethernet { ... } } is equivalent to: choice interface-type { case ethernet { container ethernet { ... } } } The case identifier MUST be unique within a choice. Bjorklund Expires November 6, 2008 [Page 67] Internet-Draft YANG May 2008 7.9.2.1. The case's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | container | 7.5 | 0..n | | description | 7.17.3 | 0..1 | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | uses | 7.12 | 0..n | +--------------+---------+-------------+ 7.9.3. The choice's default Statement The "default" statement indicates if a case should be considered as the default if no child nodes from any of the choice's cases exists. The argument is the identifier of the "case" statement. If the "default" statement is missing, there is no default case. The default case is only important when considering the default values of nodes under the cases. The default values for nodes under the default case are used if none of the nodes under any of the cases are present. There MUST NOT be any mandatory child nodes under the default case. Default values for child nodes under a case are only used if one of the nodes under that case is present, or if that case is the default case. If none of the nodes under a case are present and the case is not the default case, the default values of the cases' child nodes are ignored. In this example, the choice defaults to "interval", and the default value will be used if none of "daily", "time-of-day", or "manual" are present. If "daily" is present, the default value for "time-of-day" will be used. Bjorklund Expires November 6, 2008 [Page 68] Internet-Draft YANG May 2008 container transfer { choice how { default interval; case interval { leaf interval { type uint16; default 30; units minutes; } } case daily { leaf daily { type empty; } leaf time-of-day { type string; units 24-hour-clock; default 1am; } } case manual { leaf manual { type empty; } } } } 7.9.4. The choice's mandatory Statement The "mandatory" statement, which is optional, takes as an argument the string "true" or "false". If "mandatory" is "true", nodes from exactly one of the choice's case branches MUST exist in a valid configuration. If not specified, the default is "false". 7.9.5. XML Encoding Rules The choice and case nodes are not visible in XML. 7.9.6. NETCONF operations Since only one of the choices cases can be valid at any time, the creation of a node from one case implicitly deletes all nodes from all other cases. If an operation creates a node, the NETCONF server will delete any existing nodes that are defined in other cases inside the choice. Bjorklund Expires November 6, 2008 [Page 69] Internet-Draft YANG May 2008 7.9.7. Usage Example Given the following choice: container protocol { choice name { case a { leaf udp { type empty; } } case b { leaf tcp { type empty; } } } } A corresponding XML encoding: To change the protocol from tcp to udp: Bjorklund Expires November 6, 2008 [Page 70] Internet-Draft YANG May 2008 7.10. The anyxml Statement The "anyxml" statement defines an interior node in the schema tree. It takes one argument, which is an identifier, followed by a block of substatements that holds detailed anyxml information. The anyxml statement is used to represent an unknown chunk of XML. This can be useful in e.g. RPC replies. An example is the parameter in the operation. An anyxml node cannot be augmented. It is NOT RECOMMENDED that the anyxml statement is used to represent configuration data. 7.10.1. The anyxml's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | config | 7.17.1 | 0..1 | | description | 7.17.3 | 0..1 | | mandatory | 7.6.4 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | +--------------+---------+-------------+ 7.10.2. XML Encoding Rules An anyxml node is encoded as an XML element. The element's name is the anyxml's identifier, and its XML namespace is the module's XML namespace. The value of the anyxml node is encoded as XML content of this element. Note that any prefixes used in the encoding are local to each instance encoding. This means that the same XML may be encoded differently by different implementations. 7.10.3. NETCONF operations An anyxml node is treated as an opaque chunk of data. This data can be modified in its entirety only. Any "operation" attributes within the XML value of an anyxml node are ignored by the NETCONF server. When a NETCONF server processes an request, the elements of procedure for the anyxml node are: Bjorklund Expires November 6, 2008 [Page 71] Internet-Draft YANG May 2008 If the operation is "merge", the node is created if it does not exist, and its value is set to the XML content of the anyxml node found in the XML RPC data. If the operation is "replace", the node is created if it does not exist, and its value is set to the XML content of the anyxml node found in the XML RPC data. If the operation is "create" the node is created if it does not exist, and its value is set to the XML content of the anyxml node found in the XML RPC data. If the operation is "delete" the node is deleted if it exists. 7.10.4. Usage Example Given the following anyxml statement: anyxml data; The following are two valid encodings of the same anyxml value: 1 1 7.11. The grouping Statement The "grouping" statement is used to define a reusable block of nodes, which may be used locally in the module, in modules which include it, and by other modules which import from it. It takes one argument which is an identifier, followed by a block of substatements that holds detailed grouping information. The grouping statement is not a data definition statement and, as such, does not define any nodes in the schema tree. A grouping is like a "structure" or a "record" in conventional programming languages. Bjorklund Expires November 6, 2008 [Page 72] Internet-Draft YANG May 2008 Once a grouping is defined, it can be referenced in a "uses" statement (see Section 7.12). If the grouping is defined at the top level of a YANG module or submodule, the grouping's identifier MUST be unique within the module. For details about scoping for nested groupings, see Section 5.8. A grouping is more than just a mechanism for textual substitution, but defines a collection of nodes. References from inside the grouping are relative to the scope in which the grouping is defined, not where it is used. Prefix mappings, type names, grouping names, and extension usage are evaluated in the hierarchy where the grouping statement appears. For extensions, this means that extensions are applied to the grouping node, not the use node. 7.11.1. The grouping's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | choice | 7.9 | 0..n | | container | 7.5 | 0..n | | description | 7.17.3 | 0..1 | | grouping | 7.11 | 0..n | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | typedef | 7.3 | 0..n | | uses | 7.12 | 0..n | +--------------+---------+-------------+ Bjorklund Expires November 6, 2008 [Page 73] Internet-Draft YANG May 2008 7.11.2. Usage Example import inet-types { prefix "inet"; } grouping address { description "A reusable address group."; leaf ip { type inet:ip-address; } leaf port { type inet:port-number; } } 7.12. The uses Statement The "uses" statement is used to reference a "grouping" definition. It takes one argument, which is the name of the grouping. The effect of a "uses" reference to a grouping is that the nodes defined by the grouping are copied into the current schema tree, and then updated according to the refinement statements. Thus, the identifiers defined in the grouping are copied into the current module's namespace, even if the grouping is imported from some other module. Bjorklund Expires November 6, 2008 [Page 74] Internet-Draft YANG May 2008 7.12.1. The uses's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | choice | 7.9 | 0..n | | container | 7.5 | 0..n | | description | 7.17.3 | 0..1 | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | uses | 7.12 | 0..n | +--------------+---------+-------------+ 7.12.2. The uses's Refinement Statements Some of the properties of each node in the grouping can be refined in substatements to "uses". If a node is not present in a substatement, it is not refined, and thus used exactly as it was defined in the "grouping". The refinement substatements MUST be specified in the same order as in the grouping, and a node can be refined only once. The following refinements can be done: o A leaf or choice node may get a default value, or a new default value if it already had one. o Any node may get a specialized "description" string. o Any node may get a specialized "reference" string. o Any node may get a different "config" statement. o A leaf or choice node may get a different "mandatory" statement. o A container node may get a "presence" statement. o A leaf, leaf-list, list or container node may get additional "must" expressions. o A leaf-list or list node may get a different "min-elements" or "max-elements" statement. Bjorklund Expires November 6, 2008 [Page 75] Internet-Draft YANG May 2008 7.12.3. XML Encoding Rules Each node in the grouping is encoded as if it was defined inline, even if it is imported from another module with another XML namespace. 7.12.4. Usage Example To use the "address" grouping defined in Section 7.11.2 in a definition of an HTTP server in some other module, we can do: import acme-system { prefix acme; } container http-server { leaf name { type string; } uses acme:address; } A corresponding XML encoding: extern-web 192.0.2.1 80 If port 80 should be the default for the HTTP server, default can be added: container http-server { leaf name { type string; } uses acme:address { leaf port { default 80; } } } If we want to define a list of servers, and each server has the ip and port as keys, we can do: Bjorklund Expires November 6, 2008 [Page 76] Internet-Draft YANG May 2008 list server { key "ip port"; leaf name { type string; } uses acme:address; } The following is an error: container http-server { uses acme:address; leaf ip { // illegal - same identifier "ip" used twice type string; } } 7.13. The rpc Statement The "rpc" statement is used to define a NETCONF RPC method. It takes one argument, which is an identifier, followed by a block of substatements that holds detailed rpc information. This argument is the name of the RPC, and is used as the element name directly under the element, as designated by the substitution group "rpcOperation" in [RFC4741]. The rpc "statement" defines an rpc node in the schema tree. 7.13.1. The rpc's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | description | 7.17.3 | 0..1 | | grouping | 7.11 | 0..n | | input | 7.13.2 | 0..1 | | output | 7.13.3 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | typedef | 7.3 | 0..n | +--------------+---------+-------------+ 7.13.2. The input Statement The "input" statement, which is optional, is used to define input parameters to the RPC method. It does not take an argument. The "input" statement defines an input node in the schema tree, with the name "input". Bjorklund Expires November 6, 2008 [Page 77] Internet-Draft YANG May 2008 If a container in the input tree has a "presence" statement, the container need not be present in a NETCONF RPC invocation. If a leaf in the input tree has a "mandatory" statement with the value "true", the leaf MUST be present in a NETCONF RPC invocation. If a leaf in the input tree has a default value, the NETCONF server MUST internally use this default if the leaf is not present in a NETCONF RPC invocation. If a "config" or "must" statement is present for any node in the input tree, it is ignored. 7.13.2.1. The input's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | choice | 7.9 | 0..n | | container | 7.5 | 0..n | | grouping | 7.11 | 0..n | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | typedef | 7.3 | 0..n | | uses | 7.12 | 0..n | +--------------+---------+-------------+ 7.13.3. The output Statement The "output" statement, which is optional, is used to define output parameters to the RPC method. It does not take an argument. The "output" statement defines an output node in the schema tree, with the name "output". If a container in the output tree has a "presence" statement, the container need not be present in a NETCONF RPC reply If a leaf in the output tree has a "mandatory" statement with the value "true", the leaf MUST be present in a NETCONF RPC reply. If a leaf in the output tree has a default value, the NETCONF client MUST internally use this default if the leaf is not present in a NETCONF RPC reply. If a "config" or "must" statement is present for any node in the Bjorklund Expires November 6, 2008 [Page 78] Internet-Draft YANG May 2008 output tree, it is ignored. 7.13.3.1. The output's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | choice | 7.9 | 0..n | | container | 7.5 | 0..n | | grouping | 7.11 | 0..n | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | typedef | 7.3 | 0..n | | uses | 7.12 | 0..n | +--------------+---------+-------------+ 7.14. The notification Statement The "notification" statement is used to define a NETCONF notification. It takes one argument, which is an identifier, followed by a block of substatements that holds detailed notification information. The notification "statement" defines a notification node in the schema tree. If a container in the notification tree has a "presence" statement, the container need not be present in a NETCONF notification. If a leaf in the notification tree has a "mandatory" statement with the value "true", the leaf MUST be present in a NETCONF notification. If a leaf in the notification tree has a default value, the NETCONF server MUST internally use this default if the leaf is not present in a NETCONF notification. If a "config" or "must" statement is present for any node in the notification tree, it is ignored. Bjorklund Expires November 6, 2008 [Page 79] Internet-Draft YANG May 2008 7.14.1. The notification's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | choice | 7.9 | 0..n | | container | 7.5 | 0..n | | description | 7.17.3 | 0..1 | | grouping | 7.11 | 0..n | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | typedef | 7.3 | 0..n | | uses | 7.12 | 0..n | +--------------+---------+-------------+ 7.15. The augment Statement The "augment" statement allows a module or submodule to add to the schema tree defined in another module or submodule. The argument is a string which identifies a node in the schema tree. This node is called the augment's target node. The target node MUST be either a container, list, choice, case, rpc, input, output, or notification node. It is augmented with the nodes defined in the substatements that follow the "augment" statement. The augment string is a schema node identifier. The syntax is formally defined by the rule "augment-arg" in Appendix D. If the "augment" statement is on the top-level in a module or submodule, the absolute form of a schema node identifier MAY be used. Otherwise, the descendant form MUST be used. The syntax for a schema node identifier is a subset of the XPath syntax. It is an absolute or relative XPath location path in abbreviated syntax, where axes and predicates are not permitted. If the target node is a container, list, case, input, output, or notification node, the "container", "leaf", "list", "leaf-list", "uses", and "choice" statements can be used within the "augment" statement. If the target node is a choice node, the "case" statement can be used within the "augment" statement. Bjorklund Expires November 6, 2008 [Page 80] Internet-Draft YANG May 2008 If the target node is rpc node, the "input" and "output" statements can be used within the "augment" statement. 7.15.1. The augment's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | anyxml | 7.10 | 0..n | | augment | 7.15 | 0..n | | case | 7.9.2 | 0..n | | choice | 7.9 | 0..n | | container | 7.5 | 0..n | | description | 7.17.3 | 0..1 | | leaf | 7.6 | 0..n | | leaf-list | 7.7 | 0..n | | list | 7.8 | 0..n | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | uses | 7.12 | 0..n | | when | 7.15.2 | 0..1 | +--------------+---------+-------------+ 7.15.2. The when Statement The "when" statement allows the augmentation to be conditional, with the nodes only being valid when a specific criteria is satisfied. The statement's argument is an XPath expression, which is used to formally specify constraints on which instances in the data tree will be augmented by this statement. If the XPath expression conceptually evaluates to "true" for a particular instance, then it is augmented, otherwise it is not. The XPath expression is conceptually evaluated in the following context: o The context node is the augment's target node in the data tree, if the target node is a data node. Otherwise, the context node is the closest ancestor node to the target node which is also a data node. o The set of namespace declarations is the set of all "import" statements' prefix and namespace pairs, and the "prefix" statement's prefix for the "namespace" statement's URI. o The null namespace is defined to be the namespace of the current module. Bjorklund Expires November 6, 2008 [Page 81] Internet-Draft YANG May 2008 o One variable "this", which is the context node, is defined. The result of the XPath expression is converted to a boolean value using the standard XPath rules. Note that the XPath expression is conceptually evaluated. This means that an implementation does not have to use an XPath evaluator on the device. The augment can very well be implemented with specially written code. 7.15.3. XML Encoding Rules All data nodes defined in the "augment" statement are defined as XML elements in the XML namespace of the module where the "augment" is specified. When a node is augmented, the augmented child nodes are encoded after all normal child nodes. If the node is augmented more than once, the blocks of augmented child nodes are sorted (in alphanumeric order) according to their namespace URI and name of the first child node in each block. 7.15.4. Usage Example In namespace http://example.com/schema/interfaces, we have: container interfaces { list ifEntry { key "ifIndex"; leaf ifIndex { type uint32; } leaf ifDescr { type string; } leaf ifType { type iana:IfType; } leaf ifMtu { type int32; } } } Then in namespace http://example.com/schema/ds0, we have: Bjorklund Expires November 6, 2008 [Page 82] Internet-Draft YANG May 2008 import interface-module { prefix if; } augment "/if:interfaces/if:ifEntry" { when "if:ifType='ds0'"; leaf ds0ChannelNumber { type ChannelNumber; } } A corresponding XML encoding: 1 Flintstone Inc Ethernet A562 ethernetCsmacd 1500 2 Flintstone Inc DS0 ds0 1 As another example, suppose we have the choice defined in Section 7.9.7. The following construct can be used to extend the protocol definition: augment /ex:system/ex:protocol/ex:name { case c { leaf smtp { type empty; } } } A corresponding XML encoding: Bjorklund Expires November 6, 2008 [Page 83] Internet-Draft YANG May 2008 or 7.16. The extension Statement The "extension" statement allows the definition of new statements within the YANG language. This new statement definition can be imported and used by other modules. The statement's argument is an identifier that is the new keyword for the extension and must be followed by a block of substatements that holds detailed extension information. The purpose of the extension statement is to define a keyword, so that it can be imported and used by other modules. The extension can be used by like a normal YANG statement, with the statement name followed by an argument if one is defined by the extension, and an optional block of substatements. The statement's name is created by combining the the prefix of the module in which the extension was defined, a colon (":"), and the extension's keyword, with no interleaving whitespace. The substatements of an extension are defined by the extension, using some mechanism outside the scope of this specification. Syntactically, the substatements MUST be core YANG statements, or also defined using "extension" statements. Core YANG statements in extensions MUST follow the syntactical rules in Appendix D. 7.16.1. The extension's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | argument | 7.16.2 | 0..1 | | description | 7.17.3 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | +--------------+---------+-------------+ 7.16.2. The argument Statement The "argument" statement, which is optional, takes as an argument a string which is the name of the argument to the keyword. If no argument statement is present, the keyword expects no argument when Bjorklund Expires November 6, 2008 [Page 84] Internet-Draft YANG May 2008 it is used. The argument's name is used in the YIN mapping, where it is used as an XML attribute or element name, depending on the argument's text statement. 7.16.2.1. The argument's Substatements +--------------+----------+-------------+ | substatement | section | cardinality | +--------------+----------+-------------+ | yin-element | 7.16.2.2 | 0..1 | +--------------+----------+-------------+ 7.16.2.2. The yin-element Statement The "yin-element" statement, which is optional, takes as an argument the string "true" or "false". This statement indicates if the argument should be mapped to an XML element in YIN or to an XML attribute. (see Appendix B). If no "yin-element" statement is present, it defaults to "false". 7.16.3. Usage Example To define an extension: module my-extensions { ... extension c-define { description "Takes as argument a name string. Makes the code generator use the given name in the #define."; argument "name"; } } To use the extension: Bjorklund Expires November 6, 2008 [Page 85] Internet-Draft YANG May 2008 module my-interfaces { ... import my-extensions { prefix "myext"; } ... container interfaces { ... myext:c-define "MY_INTERFACES"; } } 7.17. Common Statements This section defines sub-statements common to several other statements. 7.17.1. The config Statement The "config" statement takes as an argument the string "true" or "false". If "config" is "true", the definition represents configuration, and will be part of the reply to a request, and may be sent in a or request. If "config" is "false", it represents state data, and will be part of the reply to a , but not to a request. If "config" is not specified, the default is the same as the parent node's (in the data model) "config" value. If the top node does not specify a "config" statement, the default is "true". If a node has "config" "false", no node underneath it can have "config" set to "true". 7.17.2. The status Statement The "status" statement takes as an argument one of the strings "current", "deprecated", or "obsolete". o "current" means that the definition is current and valid. o "deprecated" indicates an obsolete definition, but it permits new/ continued implementation in order to foster interoperability with older/existing implementations. o "obsolete" means the definition is obsolete and should not be implemented and/or can be removed if previously implemented. Bjorklund Expires November 6, 2008 [Page 86] Internet-Draft YANG May 2008 If no status is specified, the default is "current". If a definition is "current", it MUST NOT reference a "deprecated" or "obsolete" definition within the same module. If a definition is "deprecated", it MUST NOT reference an "obsolete" definition within the same module. 7.17.3. The description Statement The "description" statement takes as an argument a string which contains a high-level textual description of this definition. 7.17.4. The reference Statement The "reference" statement takes as an argument a string which is used to specify a textual cross-reference to an external document, either another module which defines related management information, or a document which provides additional information relevant to this definition. Bjorklund Expires November 6, 2008 [Page 87] Internet-Draft YANG May 2008 8. Built-in Types YANG has a set of built-in types, similar to those of many programming languages, but with some differences due to special requirements from the management information model. Additional types may be defined, derived from those built-in types or from other derived types. Derived types may use subtyping to formally restrict the set of possible values. An initial set of commonly used derived types is defined in the YANG standard modules "yang-types" (Appendix A.1), "inet-types" (Appendix A.2), and "ieee- types" (Appendix A.3). The different built-in types and their derived types allow different kinds of subtyping, namely length and regular expression restrictions of strings (Section 8.3.3, Section 8.3.4) and range restrictions of numeric types (Section 8.1.3). The lexicographic representation of a value of a certain type is used in the XML encoding over NETCONF, and when specifying default values in a YANG module. 8.1. The Integer Built-in Types The integer built-in types are int8, int16, int32, int64, uint8, uint16, uint32, and uint64. They represent signed and unsigned integers of different sizes: int8 represents integer values between -128 and 127, inclusively. int16 represents integer values between -32768 and 32767, inclusively. int32 represents integer values between -2147483648 and 2147483647, inclusively. int64 represents integer values between -9223372036854775808 and 9223372036854775807, inclusively. uint8 represents integer values between 0 and 255, inclusively. uint16 represents integer values between 0 and 65535, inclusively. uint32 represents integer values between 0 and 4294967295, inclusively. Bjorklund Expires November 6, 2008 [Page 88] Internet-Draft YANG May 2008 uint64 represents integer values between 0 and 18446744073709551615, inclusively. 8.1.1. Lexicographic Representation An integer value is lexicographically represented as an optional sign ("+" or "-"), followed by a sequence of decimal digits. If no sign is specified, "+" is assumed. For convenience, when specifying a default value for an integer in a YANG module, an alternative lexicographic representation can be used, which represents the value in a hexadecimal or octal notation. The hexadecimal notation consists of an optional sign ("+" or "-"), the characters "0x" followed a number of hexadecimal digits, where letters may be upper- or lowercase. The octal notation consists of an optional sign ("+" or "-"), the character "0" followed a number of octal digits. Examples: // legal values +4711 // legal positive value 4711 // legal positive value -123 // legal negative value 0xf00f // legal positive hexadecimal value -0xf // legal negative hexadecimal value 052 // legal positive octal value // illegal values - 1 // illegal intermediate space 8.1.2. Restrictions All integer types can be restricted with the "range" statement (Section 8.1.3). 8.1.3. The range Statement The "range" statement, which is an optional substatement to the "type" statement, takes as an argument a range expression string. It is used to restrict integer and floating point built-in types, or types derived from those. A range consists of an explicit value, or a lower inclusive bound, two consecutive dots "..", and an upper inclusive bound. Multiple values or ranges can be given, separated by "|". If multiple values or ranges are given they all MUST be disjoint and MUST be in ascending order. If a value restriction is applied to an already Bjorklund Expires November 6, 2008 [Page 89] Internet-Draft YANG May 2008 restricted type, the new restriction MUST be equal or more limiting, that is raising the lower bounds, reducing the upper bounds, removing explicit values or ranges, or splitting ranges into multiple ranges with intermediate gaps. Each range boundary value given in the range expression MUST match the type being restricted, or be one of the special values "min" or "max". "min" and "max" means the minimum and maximum value accepted for the type being restricted, respectively. The range expression syntax is formally defined by the rule "range- expr" in Appendix D. 8.1.3.1. The range's Substatements +---------------+---------+-------------+ | substatement | section | cardinality | +---------------+---------+-------------+ | description | 7.17.3 | 0..1 | | error-app-tag | 7.5.3.2 | 0..1 | | error-message | 7.5.3.1 | 0..1 | | reference | 7.17.4 | 0..1 | +---------------+---------+-------------+ 8.1.4. Usage Example type int32 { range "1..4 | 10 | 20..max"; } 8.2. The Floating Point Built-in Types The floating point built-in types are float32 and float64. They represent floating point values of single and double precision as defined in [IEEE.754]. Special values are positive and negative infinity, and not-a-number. 8.2.1. Lexicographic Representation A floating point value is lexicographically represented as consisting of a decimal mantissa followed, optionally, by the character "E" or "e", followed by an integer exponent. The special values positive and negative infinity and not-a-number have lexical representations INF, -INF and NaN, respectively. The minimal value accepted for a float is -INF, and the maximal value accepted for a float is INF. 8.2.2. Restrictions All floating point types can be restricted with the "range" statement (Section 8.1.3). Bjorklund Expires November 6, 2008 [Page 90] Internet-Draft YANG May 2008 8.2.3. Usage Example type float32 { range "1..4.5 | 10 | 20..INF"; } is equivalent to type float32 { range "1..4.5 | 10 | 20..max"; } 8.3. The string Built-in Type The string built-in type represents human readable strings in YANG. Legal characters are tab, carriage return, line feed, and the legal characters of Unicode and ISO/IEC 10646 [ISO.10646]: // any Unicode character, excluding the surrogate blocks, // FFFE, and FFFF. string = *char char = %x9 / %xA / %xD / %x20-DFFF / %xE000-FFFD / %x10000-10FFFF 8.3.1. Lexicographic Representation A string value is lexicographically represented as character data in the XML encoding. 8.3.2. Restrictions A string can be restricted with the "length" (Section 8.3.3) and "pattern" (Section 8.3.4) statements. 8.3.3. The length Statement The "length" statement, which is an optional substatement to the "type" statement, takes as an argument a length expression string. It is used to restrict the built-in type "string", or types derived from "string". A "length" statement restricts the number of characters in the string. A length range consists of an explicit value, or a lower bound, two consecutive dots "..", and an upper bound. Multiple values or ranges can be given, separated by "|". Length restricting values MUST NOT be negative. If multiple values or ranges are given, they all MUST Bjorklund Expires November 6, 2008 [Page 91] Internet-Draft YANG May 2008 be disjoint and MUST be in ascending order. If a length restriction is applied to an already length restricted type, the new restriction MUST be equal or more limiting, that is, raising the lower bounds, reducing the upper bounds, removing explicit length values or ranges, or splitting ranges into multiple ranges with intermediate gaps. A length value is a non-negative integer, or one of the special values "min" or "max". "min" and "max" means the minimum and maximum length accepted for the type being restricted, respectively. An implementation is not required to support a length value larger than 18446744073709551615. The length expression syntax is formally defined by the rule "length- expr" in Appendix D. 8.3.3.1. The length's Substatements +---------------+---------+-------------+ | substatement | section | cardinality | +---------------+---------+-------------+ | description | 7.17.3 | 0..1 | | error-app-tag | 7.5.3.2 | 0..1 | | error-message | 7.5.3.1 | 0..1 | | reference | 7.17.4 | 0..1 | +---------------+---------+-------------+ 8.3.4. The pattern Statement The "pattern" statement, which is an optional substatement to the "type" statement, takes as an argument a regular expression string, as defined in [XSD-TYPES]. It is used to restrict the built-in type "string", or types derived from "string", to values that completely matches the pattern. 8.3.4.1. The pattern's Substatements +---------------+---------+-------------+ | substatement | section | cardinality | +---------------+---------+-------------+ | description | 7.17.3 | 0..1 | | error-app-tag | 7.5.3.2 | 0..1 | | error-message | 7.5.3.1 | 0..1 | | reference | 7.17.4 | 0..1 | +---------------+---------+-------------+ Bjorklund Expires November 6, 2008 [Page 92] Internet-Draft YANG May 2008 8.3.5. Usage Example With the following type: type string { length "0..4"; pattern "[0-9a-fA-F]*"; } the following strings match: AB // legal 9A00 // legal and the following strings do not match: 00ABAB // illegal xx00 // illegal 8.4. The boolean Built-in Type The boolean built-in type represents a boolean value. 8.4.1. Lexicographic Representation The lexicographical representation of a boolean value is the strings "true" and "false". 8.4.2. Restrictions A boolean cannot be restricted. 8.5. The enumeration Built-in Type The enumeration built-in type represents values from a set of assigned names. 8.5.1. Lexicographic Representation The lexicographical representation of an enumeration value is the assigned name string. 8.5.2. Restrictions An enumeration cannot be restricted. Bjorklund Expires November 6, 2008 [Page 93] Internet-Draft YANG May 2008 8.5.3. The enum Statement The "enum" statement, which is a substatement to the "type" statement, MUST be present if the type is "enumeration". It is repeatedly used to specify each assigned name of an enumeration type. It takes as an argument a string which is the assigned name. It is optionally followed by a block of substatements which holds detailed enum information. All assigned names in an enumeration MUST be unique. 8.5.3.1. The enum's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | description | 7.17.3 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | value | 8.5.3.2 | 0..1 | +--------------+---------+-------------+ 8.5.3.2. The value Statement The "value" statement, which is optional, is used to associate an integer value with the assigned name for the enum. This integer value MUST be in the range -2147483648 to 2147483647, and it MUST be unique within the enumeration type. If a value is not specified, then one will be automatically assigned. If the enum sub-statement is the first one defined, the assigned value is zero (0), otherwise the assigned value is one greater than the current highest enum value. If the current highest value is equal to 2147483647, then an enum value MUST be specified for enum sub-statements following the one with the current highest value. Bjorklund Expires November 6, 2008 [Page 94] Internet-Draft YANG May 2008 8.5.4. Usage Example type enumeration { enum enabled { value 1; } enum disabled { value 2; } } type enumeration { enum zero; enum one; enum seven { value 7; } } 8.6. The bits Built-in Type The bits built-in type represents a bit set. That is, a bits value is a set of flags identified by small integer position numbers starting at 0. Each bit number has an assigned name. 8.6.1. Restrictions A bits type cannot be restricted. 8.6.2. Lexicographic Representation The lexicographical representation of the bits type is a space separated list of the individual bit values that are set. An empty string thus represents a value where no bits are set. 8.6.3. The bit Statement The "bit" statement, which is a substatement to the "type" statement, MUST be present if the type is "bits". It is repeatedly used to specify each assigned named bit of a bits type. It takes as an argument a string which is the assigned name of the bit. It is followed by a block of substatements which holds detailed bit information. A bit name follows the same syntax rules as an identifier (see Section 6.2). All bit names in a bits type MUST be unique. Bjorklund Expires November 6, 2008 [Page 95] Internet-Draft YANG May 2008 8.6.3.1. The bit's Substatements +--------------+---------+-------------+ | substatement | section | cardinality | +--------------+---------+-------------+ | description | 7.17.3 | 0..1 | | reference | 7.17.4 | 0..1 | | status | 7.17.2 | 0..1 | | position | 8.6.3.2 | 0..1 | +--------------+---------+-------------+ 8.6.3.2. The position Statement The "position" statement, which is optional, takes as an argument a non-negative integer value which specifies the bit's position within a hypothetical bit field. The position value MUST be in the range 0 to 4294967295, and it MUST be unique within the bits type. The value is unused by YANG and the XML encoding, but is carried as a convenience to implementors. If a bit position is not specified, then one will be automatically assigned. If the bit sub-statement is the first one defined, the assigned value is zero (0), otherwise the assigned value is one greater than the current highest bit position. If the current highest bit position value is equal to 4294967295, then a position value MUST be specified for bit sub-statements following the one with the current highest position value. 8.6.4. Usage Example Given the following type: leaf mybits { type bits { bit disable-nagle { position 0; } bit auto-sense-speed { position 1; } bit 10-Mb-only { position 2; } } default "auto-sense-speed"; } Bjorklund Expires November 6, 2008 [Page 96] Internet-Draft YANG May 2008 The lexicographic representation of this leaf with bit values disable-nagle and 10-Mb-only set would be: disable-nagle 10-Mb-only 8.7. The binary Built-in Type The binary built-in type represents any binary data, i.e. a sequence of octets. 8.7.1. Restrictions A binary can be restricted with the "length" (Section 8.3.3) statement. The length of a binary value is the number of octets it contains. 8.7.2. Lexicographic Representation Binary values are encoded with the base64 encoding scheme [RFC4648]. 8.8. The keyref Built-in Type The keyref type is used to reference a particular list entry in the data tree. Its value is constrained to be the same as the key of an existing list entry. If the leaf with the keyref type represents configuration, the list entry it refers to MUST also represent configuration. Such a leaf puts a constraint on a valid configuration. In a valid configuration, all keyref nodes MUST reference existing list entries. 8.8.1. Restrictions A keyref cannot be restricted. 8.8.2. The path Statement The "path" statement, which is a substatement to the "type" statement, MUST be present if the type is "keyref". It takes as an argument a string which MUST refer to one key node of a list entry. The syntax for a path argument is a subset of the XPath syntax. It is an absolute or relative XPath location path in abbreviated syntax, where axes are not permitted, and predicates are used only for constraining the values for the key nodes for list entries. Each predicate consists of at most one equality test per key. The predicates are only used when more than one key reference is Bjorklund Expires November 6, 2008 [Page 97] Internet-Draft YANG May 2008 needed to uniquely identify a list entry. This occurs if the list has multiple keys, or a reference to a list within a list is needed. In these cases, multiple keyref leafs are typically specified, and predicates are used to tie them together. The syntax is formally defined by the rule "path-arg" in Appendix D. 8.8.3. Lexicographic Representation A keyref value is encoded the same way as the key it references. 8.8.4. Usage Example With the following list: list interface { key "name"; leaf name { type string; } list address { key "ip"; leaf ip { type yang:ip-address; } } } The following keyref refers to an existing interface: leaf mgmt-interface { type keyref { path "../interface/name"; } } A corresponding XML snippet is e.g.: eth0 lo eth0 The following keyrefs refer to an existing address of an interface: Bjorklund Expires November 6, 2008 [Page 98] Internet-Draft YANG May 2008 container default-address { leaf ifname { type keyref { path "../../interface/name"; } } leaf address { type keyref { path "../../interface[name = $this/../ifname]/address/ip"; } } } A corresponding XML snippet is e.g.: eth0
192.0.2.1
192.0.2.2
lo
127.0.0.1
eth0
192.0.2.2
8.9. The empty Built-in Type The empty built-in type represents a leaf that does not have any value, it conveys information by its presence or absence. An empty type cannot have a default value. 8.9.1. Restrictions An empty type cannot be restricted. Bjorklund Expires November 6, 2008 [Page 99] Internet-Draft YANG May 2008 8.9.2. Lexicographic Representation Not applicable. 8.9.3. Usage Example The following leaf leaf enable-qos { type empty; } will be encoded as if it exists. 8.10. The union Built-in Type The union built-in type represents a value that corresponds to one of its member types. When the type is "union", the "type" statement (Section 7.4) MUST be present. It is used to repeatedly specify each member type of the union. It takes as an argument a string which is the name of a member type. A member type can be of any built-in or derived type, except it MUST NOT be one of the built-in types "empty" or "keyref". Example: type union { type int32; type enumeration { enum "unbounded"; } } 8.10.1. Restrictions A union can not be restricted. However, each member type can be restricted, based on the rules defined in Section 8 chapter. Bjorklund Expires November 6, 2008 [Page 100] Internet-Draft YANG May 2008 8.10.2. Lexicographic Representation The lexicographical representation of an union is a value that corresponds to the representation of any one of the member types. 8.11. The instance-identifier Built-in Type The instance-identifier built-in type is used to uniquely identify a particular instance node in the data tree. The syntax for an instance-identifier is a subset of the XPath syntax, which is used to uniquely identify a node in the data tree. It is an absolute XPath location path in abbreviated syntax, where axes are not permitted, and predicates are used only for specifying the values for the key nodes for list entries, or a value of a leaf- list. Each predicate consists of one equality test per key. Each key MUST have a corresponding predicate. The syntax is formally defined by the rule "absolute-instid" in Appendix D. 8.11.1. Restrictions An instance-identifier cannot be restricted. 8.11.2. Lexicographic Representation An instance-identifier value is lexicographically represented as a string in the XML encoding. The namespace prefixes used in the encoding MUST be declared in the XML namespace scope in the instance- idenfitier's XML element. Any prefixes used in the encoding are local to each instance encoding. This means that the same instance-identifier may be encoded differently by different implementations. 8.11.3. Usage Example The following are examples of instance identifiers: /ex:system/ex:services/ex:ssh/ex:port /ex:system/ex:user[ex:name='fred'] /ex:system/ex:user[ex:name='fred']/ex:type /ex:system/ex:server[ex:ip='192.0.2.1'][ex:port='80'] Bjorklund Expires November 6, 2008 [Page 101] Internet-Draft YANG May 2008 /ex:system/ex:services/ex:ssh/ex:cipher[.='blowfish-cbc'] Bjorklund Expires November 6, 2008 [Page 102] Internet-Draft YANG May 2008 9. Updating a Module [Editor's Note: add versioning rules, i.e. what can be done w/o changing the module name and the namespace] Bjorklund Expires November 6, 2008 [Page 103] Internet-Draft YANG May 2008 10. IANA Considerations A registry for standard YANG modules shall be set up. Each entry shall contain the unique module name, the unique XML namespace from the YANG URI Scheme and some reference to the module's documentation. This document registers five URIs for the YANG XML namespace in the IETF XML registry [RFC3688]. URI: urn:ietf:params:xml:ns:yang:ieee-types URI: urn:ietf:params:xml:ns:yang:inet-types URI: urn:ietf:params:xml:ns:yang:yang-types URI: urn:ietf:params:xml:ns:yang:yin:1 URI: urn:ietf:params:xml:ns:yang:1 Bjorklund Expires November 6, 2008 [Page 104] Internet-Draft YANG May 2008 11. Security Considerations This document defines a language with which to write and read descriptions of management information. The language itself has no security impact on the Internet. Data modeled in YANG might contain sensitive information. RPCs or notifications defined in YANG might transfer sensitive information. Security issues are related to the usage of data modeled in YANG. Such issues shall be dealt with in documents describing the data models and documents about the interfaces used to manipulate the data e.g. the NETCONF documents. YANG is dependent upon: o the security of the transmission infrastructure used to send sensitive information o the security of applications which store or release such sensitive information. o adequate authentication access control mechanisms to restrict the usage of sensitive data. Bjorklund Expires November 6, 2008 [Page 105] Internet-Draft YANG May 2008 12. Contributors The following people all contributed significantly to the initial YANG draft: - Andy Bierman (andybierman.com) - Balazs Lengyel (Ericsson) - David Partain (Ericsson) - Juergen Schoenwaelder (Jacobs University Bremen) - Phil Shafer (Juniper Networks) Bjorklund Expires November 6, 2008 [Page 106] Internet-Draft YANG May 2008 13. References 13.1. Normative References [IEEE.754] Institute of Electrical and Electronics Engineers, "Standard for Binary Floating-Point Arithmetic", IEEE Standard 754, August 1985. [ISO.10646] International Organization for Standardization, "Information Technology - Universal Multiple-octet coded Character Set (UCS) - Part 1: Architecture and Basic Multilingual Plane", ISO Standard 10646-1, May 1993. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, November 2003. [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January 2004. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. [RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, October 2006. [RFC4741] Enns, R., "NETCONF Configuration Protocol", RFC 4741, December 2006. [RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008. [XSD] Maloney, M., Beech, D., Thompson, H., and N. Mendelsohn, "XML Schema Part 1: Structures Second Edition", W3C REC REC-xmlschema-1-20041021, October 2004. [XSD-TYPES] Biron, P V. and A. Malhotra, "XML Schema Part 2: Datatypes Second Edition", W3C REC REC-xmlschema-2-20041028, October 2004. Bjorklund Expires November 6, 2008 [Page 107] Internet-Draft YANG May 2008 13.2. Non-Normative References [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Structure of Management Information Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. Schoenwaelder, Ed., "Textual Conventions for SMIv2", STD 58, RFC 2579, April 1999. [RFC3780] Strauss, F. and J. Schoenwaelder, "SMIng - Next Generation Structure of Management Information", RFC 3780, May 2004. Bjorklund Expires November 6, 2008 [Page 108] Internet-Draft YANG May 2008 Appendix A. Derived YANG Types Most YANG modules are built on top of the definitions of some commonly used derived types. The definitions of these derived types are contained in the "yang-types", "inet-types", and "ieee-types" modules which are defined below. Their derived types are generally applicable for modeling all areas of management information. A.1. Core YANG Derived Types module yang-types { // XXX namespace to be allocated by IANA namespace "urn:ietf:params:xml:ns:yang:yang-types"; prefix "yang"; organization "YANG Language Design Team"; contact "Martin Bjorklund (Editor) "; description "This module contains standard derived YANG types."; revision 2007-10-02 { description "Initial revision."; } /* * collection of counter and gauge types */ typedef counter32 { type uint32; description "The counter32 type represents a non-negative integer which monotonically increases until it reaches a maximum value of 2^32-1 (4294967295 decimal), when it wraps around and starts increasing again from zero. Counters have no defined `initial' value, and thus, a single value of a counter has (in general) no information content. Discontinuities in the monotonically increasing value normally occur at re-initialization of the management system, and at other times as specified in the description of an object instance using this type. If Bjorklund Expires November 6, 2008 [Page 109] Internet-Draft YANG May 2008 such other times can occur, for example, the creation of an object instance of type counter32 at times other than re-initialization, then a corresponding object should be defined, with an appropriate type, to indicate the last discontinuity. The counter32 type should not be used for configuration objects. A default statement should not be used for attributes with a type value of counter32."; reference "RFC 2578 (STD 58)"; } typedef zero-based-counter32 { type yang:counter32; default "0"; description "The zero-based-counter32 type represents a counter32 which has the defined `initial' value zero."; reference "RFC 2021"; } typedef counter64 { type uint64; description "The counter64 type represents a non-negative integer which monotonically increases until it reaches a maximum value of 2^64-1 (18446744073709551615), when it wraps around and starts increasing again from zero. Counters have no defined `initial' value, and thus, a single value of a counter has (in general) no information content. Discontinuities in the monotonically increasing value normally occur at re-initialization of the management system, and at other times as specified in the description of an object instance using this type. If such other times can occur, for example, the creation of an object instance of type counter64 at times other than re-initialization, then a corresponding object should be defined, with an appropriate type, to indicate the last discontinuity. The counter64 type should not be used for configuration objects. A default statement should not be used for attributes with a type value of counter64."; reference "RFC 2578 (STD 58)"; Bjorklund Expires November 6, 2008 [Page 110] Internet-Draft YANG May 2008 } typedef zero-based-counter64 { type yang:counter64; default "0"; description "The zero-based-counter64 type represents a counter64 which has the defined `initial' value zero."; reference "RFC 2856"; } typedef gauge32 { type uint32; description "The gauge32 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^32-1 (4294967295 decimal), and the minimum value can not be smaller than 0. The value of a gauge32 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below (increases above) the maximum (minimum) value, the gauge32 also decreases (increases)."; reference "RFC 2578 (STD 58)"; } typedef gauge64 { type uint64; description "The gauge64 type represents a non-negative integer, which may increase or decrease, but shall never exceed a maximum value, nor fall below a minimum value. The maximum value can not be greater than 2^64-1 (18446744073709551615), and the minimum value can not be smaller than 0. The value of a gauge64 has its maximum value whenever the information being modeled is greater than or equal to its maximum value, and has its minimum value whenever the information being modeled is smaller than or equal to its minimum value. If the information being modeled subsequently decreases below Bjorklund Expires November 6, 2008 [Page 111] Internet-Draft YANG May 2008 (increases above) the maximum (minimum) value, the gauge64 also decreases (increases)."; reference "RFC 2856"; } /* * collection of identifier related types */ typedef uri { type string; description "A uri type represents Uniform Resource Identifier (URI) as defined by STD 66. Objects using this type MUST be in US-ASCII encoding, and MUST be normalized as described by RFC 3986 Sections 6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary percent-encoding is removed, and all case-insensitive characters are set to lowercase except for hexadecimal digits, which are normalized to uppercase as described in Section 6.2.2.1. The purpose of this normalization is to help provide unique URIs. Note that this normalization is not sufficient to provide uniqueness. Two URIs that are textually distinct after this normalization may still be equivalent. Objects using this type MAY restrict the schemes that they permit. For example, 'data:' and 'urn:' schemes might not be appropriate. A zero-length URI is not a valid URI. This can be used to express 'URI absent' where required, for example when used as an index field."; reference "RFC 3986 (STD 66), RFC 3305, and RFC 5017"; } typedef object-identifier { type string { pattern '[0-2](\.\d+)+'; } description "The object-identifier type represents administratively assigned names in a registration-hierarchical-name tree. Bjorklund Expires November 6, 2008 [Page 112] Internet-Draft YANG May 2008 Values of this type are denoted as a sequence of numerical non-negative sub-identifier values. Each sub-identifier value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers are separated by single dots and without any intermediate white space. Although the number of sub-identifiers is not limited, module designers should realize that there may be implementations that stick with the SMIv1/v2 limit of 128 sub-identifiers."; reference "ITU-T Recommendation X.660 / ISO/IEC 9834-1"; } /* * collection of date and time related types */ typedef date-and-time { type string { pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.d*)?' + '(Z|(\+|-)\d{2}:\d{2})'; } description 'The date-and-time type is a profile of the ISO 8601 standard for representation of dates and times using the Gregorian calendar. The format is most easily described using the following ABFN (see RFC 3339): date-fullyear = 4DIGIT date-month = 2DIGIT ; 01-12 date-mday = 2DIGIT ; 01-28, 01-29, 01-30, 01-31 time-hour = 2DIGIT ; 00-23 time-minute = 2DIGIT ; 00-59 time-second = 2DIGIT ; 00-58, 00-59, 00-60 time-secfrac = "." 1*DIGIT time-numoffset = ("+" / "-") time-hour ":" time-minute time-offset = "Z" / time-numoffset partial-time = time-hour ":" time-minute ":" time-second [time-secfrac] full-date = date-fullyear "-" date-month "-" date-mday full-time = partial-time time-offset date-time = full-date "T" full-time'; reference "RFC 3339"; } Bjorklund Expires November 6, 2008 [Page 113] Internet-Draft YANG May 2008 typedef timeticks { type uint32; description "The timeticks type represents a non-negative integer which represents the time, modulo 2^32 (4294967296 decimal), in hundredths of a second between two epochs. When objects are defined which use this type, the description of the object identifies both of the reference epochs."; reference "RFC 2578 (STD 58)"; } typedef timestamp { type yang:timeticks; description "The timestamp type represents the value of an associated timeticks object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. When the specific occurrence occurred prior to the last time the associated timeticks attribute was zero, then the timestamp value is zero. Note that this requires all timestamp values to be reset to zero when the value of the associated timeticks attribute reaches 497+ days and wraps around to zero. The associated timeticks object must be specified in the description of any object using this type."; reference "RFC 2579 (STD 58)"; } /* * collection of generic address types */ typedef phys-address { type string; description "Represents media- or physical-level addresses."; reference "RFC 2579 (STD 58)"; } } A.2. Internet Specific Derived Types Bjorklund Expires November 6, 2008 [Page 114] Internet-Draft YANG May 2008 module inet-types { // XXX namespace to be allocated by IANA namespace "urn:ietf:params:xml:ns:yang:inet-types"; prefix "inet"; organization "YANG Language Design Team"; contact "Martin Bjorklund (Editor) "; description "This module contains standard derived YANG types for Internet addresses and related things."; revision 2007-10-02 { description "Initial revision."; } /* * collection of protocol field related types */ typedef ip-version { type enumeration { enum unknown { value 0; description "An unknown or unspecified version of the Internet protocol."; } enum ipv4 { value 1; description "The IPv4 protocol as defined in RFC 791."; } enum ipv6 { value 2; description "The IPv6 protocol as defined in RFC 2460."; } } description "This value represents the version of the IP protocol."; reference "RFC 791 (STD 5), RFC 2460"; Bjorklund Expires November 6, 2008 [Page 115] Internet-Draft YANG May 2008 } typedef dscp { type uint8 { range "0..63"; } description "The dscp type represents a Differentiated Services Code-Point that may be used for marking a traffic stream."; reference "RFC 3289, RFC 2474, RFC 2780"; } typedef flow-label { type uint32 { range "0..1048575"; } description "The flow-label type represents flow identifier or Flow Label in an IPv6 packet header that may be used to discriminate traffic flows."; reference "RFC 2460"; } typedef port-number { type uint16 { range "1..65535"; } description "The port-number type represents a 16-bit port number of an Internet transport layer protocol such as UDP, TCP, DCCP or SCTP. Port numbers are assigned by IANA. A current list of all assignments is available from . Note that the value zero is not a valid port number. A union type might be used in situations where the value zero is meaningful."; reference "RFC 4001"; } /* * collection of autonomous system related types */ Bjorklund Expires November 6, 2008 [Page 116] Internet-Draft YANG May 2008 typedef asn { type uint32; description "The asn type represents autonomous system numbers which identify an Autonomous System (AS). An AS is a set of routers under a single technical administration, using an interior gateway protocol and common metrics to route packets within the AS, and using an exterior gateway protocol to route packets to other ASs'. IANA maintains the AS number space and has delegated large parts to the regional registries. Autonomous system numbers are currently limited to 16 bits (0..65535). There is however work in progress to enlarge the autonomous system number space to 32 bits. This textual convention therefore uses an uint32 base type without a range restriction in order to support a larger autonomous system number space."; reference "RFC 1771, RFC 1930, RFC 4001"; } /* * collection of IP address and hostname related types */ typedef ip-address { type union { type inet:ipv4-address; type inet:ipv6-address; } description "The ip-address type represents an IP address and is IP version neutral. The format of the textual representations implies the IP version."; } typedef ipv4-address { type string { pattern '(([0-1]?[0-9]?[0-9]|2[0-4][0-9]|25[0-5])\.){3}' + '([0-1]?[0-9]?[0-9]|2[0-4][0-9]|25[0-5])' + '(%[\p{N}\p{L}]+)?'; } description "The ipv4-address type represents an IPv4 address in dotted-quad notation. The IPv4 address may include a zone index, separated by a % sign."; Bjorklund Expires November 6, 2008 [Page 117] Internet-Draft YANG May 2008 } typedef ipv6-address { type string { pattern /* full */ '((([0-9a-fA-F]{1,4}:){7})([0-9a-fA-F]{1,4})' + '(%[\p{N}\p{L}]+)?)' /* mixed */ + '|((([0-9a-fA-F]{1,4}:){6})(([0-9]{1,3}\.' + '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}))' + '(%[\p{N}\p{L}]+)?)' /* shortened */ + '|((([0-9a-fA-F]{1,4}:)*([0-9a-fA-F]{1,4}))*(::)' + '(([0-9a-fA-F]{1,4}:)*([0-9a-fA-F]{1,4}))*' + '(%[\p{N}\p{L}]+)?)' /* shortened mixed */ + '((([0-9a-fA-F]{1,4}:)*([0-9a-fA-F]{1,4}))*(::)' + '(([0-9a-fA-F]{1,4}:)*([0-9a-fA-F]{1,4}))*' + '(([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}))' + '(%[\p{N}\p{L}]+)?)'; } description "The ipv6-address type represents an IPv6 address in full, mixed, shortened and shortened mixed notation. The IPv6 address may include a zone index, separated by a % sign."; } typedef ip-prefix { type union { type inet:ipv4-prefix; type inet:ipv6-prefix; } description "The ip-prefix type represents an IP prefix and is IP version neutral. The format of the textual representations implies the IP version."; } typedef ipv4-prefix { type string { pattern '(([0-1]?[0-9]?[0-9]|2[0-4][0-9]|25[0-5])\.){3}' + '([0-1]?[0-9]?[0-9]|2[0-4][0-9]|25[0-5])' + '/\p{N}+'; } description Bjorklund Expires November 6, 2008 [Page 118] Internet-Draft YANG May 2008 "The ipv4-prefix type represents an IPv4 address prefix. The prefix length is given by the number following the slash character and must be less than or equal 32. Values larger than 32 should be treated as 32. A prefix length value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The IPv4 address represented in dotted quad notation should have all bits that do not belong to the prefix set to zero."; } typedef ipv6-prefix { type string { pattern /* full */ '((([0-9a-fA-F]{1,4}:){7})([0-9a-fA-F]{1,4})' + '/\p{N}+)' /* mixed */ + '|((([0-9a-fA-F]{1,4}:){6})(([0-9]{1,3}\.' + '[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}))' + '/\p{N}+)' /* shortened */ + '|((([0-9a-fA-F]{1,4}:)*([0-9a-fA-F]{1,4}))*(::)' + '(([0-9a-fA-F]{1,4}:)*([0-9a-fA-F]{1,4}))*' + '/\p{N}+)' /* shortened mixed */ + '((([0-9a-fA-F]{1,4}:)*([0-9a-fA-F]{1,4}))*(::)' + '(([0-9a-fA-F]{1,4}:)*([0-9a-fA-F]{1,4}))*' + '(([0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}))' + '/\p{N}+)'; } description "The ipv6-prefix type represents an IPv6 address prefix. The prefix length is given by the number following the slash character and must be less than or equal 128. Values larger than 128 should be treated as 128. A prefix length value of n corresponds to an IP address mask which has n contiguous 1-bits from the most significant bit (MSB) and all other bits set to 0. The IPv6 address represented in dotted quad notation should have all bits that do not belong to the prefix set to zero."; } Bjorklund Expires November 6, 2008 [Page 119] Internet-Draft YANG May 2008 typedef domain-name { type string { pattern '([\p{L}\p{N}]+\.)*[\p{L}\p{N}]'; } description "The domain-name type represents a DNS domain name. The name SHOULD be fully qualified whenever possible. The description clause of objects using the domain-name type MUST describe how (and when) these names are resolved to IP addresses. Note that the resolution of a domain-name value may require to query multiple DNS records (e.g., A for IPv4 and AAAA for IPv6). The order of the resolution process and which DNS record takes precedence depends on the configuration of the resolver."; reference "RFC 1034"; } typedef host { type union { type inet:ip-address; type inet:domain-name; } description "The host type represents either an IP address or a DNS domain name."; } } A.3. IEEE 802 Specific Derived Types module ieee-types { // XXX namespace to be allocated by IANA namespace "urn:ietf:params:xml:ns:yang:ieee-types"; prefix "ieee"; import yang-types { prefix yang; } Bjorklund Expires November 6, 2008 [Page 120] Internet-Draft YANG May 2008 organization "YANG Language Design Team"; contact "Martin Bjorklund (Editor) "; description "This module contains standard derived YANG types for IEEE 802 addresses and related things."; revision 2007-10-02 { description "Initial revision."; } /* * collection of IEEE address type definitions */ typedef mac-address { type yang:phys-address { pattern '([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}'; } description "The mac-address type represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires MAC addresses to be transmitted most significant bit first."; reference "RFC 2579 STD 58"; } /* * collection of IEEE 802 related identifier types */ typedef bridgeid { type string { pattern '[0-9a-fA-F]{4}:' + '([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}'; } description "The bridgeid type represents identifers that uniquely identify a bridge. Its first four hexadecimal digits contain a priority value followed by a colon. The remaining characters contain the MAC address used to refer to a bridge in a unique fashion (typically, the Bjorklund Expires November 6, 2008 [Page 121] Internet-Draft YANG May 2008 numerically smallest MAC address of all ports on the bridge)."; reference "RFC 4188"; } typedef vlanid { type uint16 { range "1..4094"; } description "The vlanid type uniquely identifies a VLAN. This is the 12-bit VLAN-ID used in the VLAN Tag header. The range is defined by the referenced specification."; reference "IEEE Std 802.1Q 2003 Edition, Virtual Bridged Local Area Networks."; } } Bjorklund Expires November 6, 2008 [Page 122] Internet-Draft YANG May 2008 Appendix B. YIN A YANG module can be specified in an alternative XML-based syntax called YIN. This appendix describes symmetric mapping rules between the two formats. The YANG and YIN formats contain equivalent information using different notations. The purpose of the YIN notation is to allow the user to translate YANG into YIN, use the rich set of XML based tools on the YIN format to transform, or filter the model information. Tools like XSLT or XML validators can be utilized. After this the model can be transformed back to the YANG format if needed, which provides a more concise and readable format. The YANG-2-YIN and the YIN-2-YANG transformations will not modify the information content of the model. B.1. Formal YIN Definition YIN is described by an algorithm that transforms YANG to YIN. B.2. Transformation Algorithm YANG-2-YIN Every keyword results in a new XML element. The name of the element is the keyword. All core YANG elements are defined in the namespace "urn:ietf:params:xml:ns:yang:yin:1". [XXX IANA] The top-level element is always or . Elements which represent keywords that are imported extensions from other modules MUST be properly namespace qualified, where the namespace is the namespace of the imported module. Translators SHOULD use the same prefix as used in the YANG module. If the keyword has an argument, its encoding depends on the value of the argument's "yin-element". If "yin-element" is false, the argument is encoded as an XML attribute to the keyword's element. If "yin-element" is true, the argument is encoded as a subelement to the keyword's element. The name of the attribute or element is the name of the argument. The core YANG keywords have arguments according to the table below. Extension keywords have arguments according to Section 7.16.2. YANG to YIN keyword map Bjorklund Expires November 6, 2008 [Page 123] Internet-Draft YANG May 2008 +---------------+---------------+-------------+ | keyword | argument name | yin-element | +---------------+---------------+-------------+ | anyxml | name | false | | argument | name | false | | augment | target-node | false | | belongs-to | module | false | | bit | name | false | | case | name | false | | choice | name | false | | config | value | false | | contact | info | true | | container | name | false | | default | value | false | | description | text | true | | enum | name | false | | error-app-tag | value | false | | error-message | value | true | | extension | name | false | | grouping | name | false | | import | module | false | | include | module | false | | input | | n/a | | key | value | false | | leaf | name | false | | leaf-list | name | false | | length | value | false | | list | name | false | | mandatory | value | false | | max-elements | value | false | | min-elements | value | false | | module | name | false | | must | condition | false | | namespace | uri | false | | notification | name | false | | ordered-by | value | false | | organization | info | true | | output | | n/a | | path | value | false | | pattern | value | false | | position | value | false | | prefix | value | false | | presence | value | false | | range | value | false | | reference | info | false | | revision | date | false | | rpc | name | false | | status | value | false | Bjorklund Expires November 6, 2008 [Page 124] Internet-Draft YANG May 2008 | submodule | name | false | | type | name | false | | typedef | name | false | | unique | tag | false | | units | name | false | | uses | name | false | | value | value | false | | when | condition | false | | yang-version | value | false | | yin-element | value | false | +---------------+---------------+-------------+ Table 30 If a statement is followed by substatements, those substatements are subelements in the YIN mapping. Comments in YANG MAY be transformed into XML comments. B.2.1. Usage Example The following YANG snippet: leaf mtu { type uint32; description "The MTU of the interface."; } is translated into the following YIN snippet: The MTU of the interface." B.3. Transformation Algorithm YIN-2-YANG The transformation is based on a recursive algorithm that is started on the or element. The element is transformed into a YANG keyword. If the keyword in Table 30 is marked as yin-element true, the subelement with the keyword's argument name in Table 30 contains the YANG keyword's argument as text content. If the keyword in Table 30 is marked as yin-element false, the element's attribute with keyword's argument name in Table 30 contains the YANG keyword's argument. Bjorklund Expires November 6, 2008 [Page 125] Internet-Draft YANG May 2008 If there are no other subelements to the element, the YANG statement is closed with a ";". Otherwise, each such subelement is transformed, according to the same algorithm, as substatements to the current YANG statement, enclosed within "{" and "}". XML comments in YIN MAY be transformed into YANG comments. B.3.1. Tabulation, Formatting To get a readable YANG module the YANG output will have to be indented with appropriate whitespace characters. Bjorklund Expires November 6, 2008 [Page 126] Internet-Draft YANG May 2008 Appendix C. XML Schema Considerations It is possible to generate an XSD document representing the data model defined in YANG. The XSD will specify the structure of the model, the used types, cardinality, etc. but a good part of the information in YANG can not be represented in standard XSD constructs e.g. config, status, default, keyref. The above information will be added to XSD inside annotation statements (which can not be handled by standard XML tools). The exact form of annotations is for further study. Data models defined in YANG might have multiple top-level elements. To make it possible to validate the XML encoded data, both for the generated XSD describing the data model and for the config and state data received in NETCONF RPCs a single top level element shall be added. From a YANG model, many different XSD schema can be generated defining the same data model. The exact rules to generate XSD from YANG are outside the scope of this document, however some general considerations are needed. Bjorklund Expires November 6, 2008 [Page 127] Internet-Draft YANG May 2008 Appendix D. YANG ABNF Grammar In YANG, almost all statements are unordered. The ABNF grammar [RFC5234] defines the canonical order. To improve module readability, it is RECOMMENDED that clauses be entered in this order. Within the ABNF grammar, unordered statements are marked with comments. This grammar assumes that the scanner replaces YANG comments with a single space character. module-stmt = module-keyword sep identifier-str optsep "{" stmtsep module-header-stmts linkage-stmts meta-stmts revision-stmts body-stmts "}" optsep submodule-stmt = submodule-keyword sep identifier-str optsep "{" stmtsep submodule-header-stmts linkage-stmts meta-stmts revision-stmts body-stmts "}" optsep module-header-stmts = ;; these stmts can appear in any order [yang-version-stmt stmtsep] namespace-stmt stmtsep prefix-stmt stmtsep submodule-header-stmts = ;; these stmts can appear in any order [yang-version-stmt stmtsep] belongs-to-stmt stmtsep meta-stmts = ;; these stmts can appear in any order [organization-stmt stmtsep] [contact-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] linkage-stmts = ;; these stmts can appear in any order *(import-stmt stmtsep) Bjorklund Expires November 6, 2008 [Page 128] Internet-Draft YANG May 2008 *(include-stmt stmtsep) revision-stmts = *(revision-stmt stmtsep) body-stmts = *((extension-stmt / typedef-stmt / grouping-stmt / data-def-stmt / rpc-stmt / notification-stmt) stmtsep) data-def-stmt = container-stmt / leaf-stmt / leaf-list-stmt / list-stmt / choice-stmt / anyxml-stmt / uses-stmt / augment-stmt case-data-def-stmt = container-stmt / leaf-stmt / leaf-list-stmt / list-stmt / anyxml-stmt / uses-stmt / augment-stmt yang-version-stmt = yang-version-keyword sep "1" optsep stmtend import-stmt = import-keyword sep identifier-str optsep "{" stmtsep prefix-stmt stmtsep "}" include-stmt = include-keyword sep identifier-str optsep stmtend namespace-stmt = namespace-keyword sep uri-str optsep stmtend uri-str = < a string which matches the rule URI in RFC 3986 > prefix-stmt = prefix-keyword sep prefix-str optsep stmtend belongs-to-stmt = belongs-to-keyword sep identifier-str optsep stmtend Bjorklund Expires November 6, 2008 [Page 129] Internet-Draft YANG May 2008 organization-stmt = organization-keyword sep string optsep stmtend contact-stmt = contact-keyword sep string optsep stmtend description-stmt = description-keyword sep string optsep stmtend reference-stmt = reference-keyword sep string optsep stmtend units-stmt = units-keyword sep string optsep stmtend revision-stmt = revision-keyword sep date-expr-str optsep (";" / "{" stmtsep [description-stmt stmtsep] "}") extension-stmt = extension-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [argument-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") argument-stmt = argument-keyword sep identifier-str optsep (";" / "{" stmtsep [yin-element-stmt stmtsep] "}") yin-element-stmt = yin-element-keyword sep yin-element-arg-str stmtend yin-element-arg-str = < a string which matches the rule yin-element-arg > yin-element-arg = true-keyword / false-keyword typedef-stmt = typedef-keyword sep identifier-str optsep "{" stmtsep ;; these stmts can appear in any order type-stmt stmtsep [units-stmt stmtsep] [default-stmt stmtsep] Bjorklund Expires November 6, 2008 [Page 130] Internet-Draft YANG May 2008 [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}" type-stmt = type-keyword sep identifier-ref-str optsep (";" / "{" stmtsep ( numerical-restrictions / string-restrictions / enum-specification / keyref-specification / bits-specification / union-specification ) stmtsep "}") numerical-restrictions = range-stmt stmtsep range-stmt = range-keyword sep range-expr-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [error-message-stmt stmtsep] [error-app-tag-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") string-restrictions = ;; these stmts can appear in any order [length-stmt stmtsep] [pattern-stmt stmtsep] length-stmt = length-keyword sep length-expr-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [error-message-stmt stmtsep] [error-app-tag-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") pattern-stmt = pattern-keyword sep string optsep (";" / "{" stmtsep ;; these stmts can appear in any order [error-message-stmt stmtsep] Bjorklund Expires November 6, 2008 [Page 131] Internet-Draft YANG May 2008 [error-app-tag-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") default-stmt = default-keyword sep string stmtend enum-specification = 1*(enum-stmt stmtsep) enum-stmt = enum-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [value-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") keyref-specification = path-stmt stmtsep path-stmt = path-keyword sep path-arg-str stmtend union-specification = 1*(type-stmt stmtsep) bits-specification = 1*(bit-stmt stmtsep) bit-stmt = bit-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [position-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}" "}") position-stmt = position-keyword sep position-value-str stmtend position-value-str = < a string which matches the rule position-value > position-value = non-negative-decimal-value status-stmt = status-keyword sep status-arg-str stmtend status-arg-str = < a string which matches the rule Bjorklund Expires November 6, 2008 [Page 132] Internet-Draft YANG May 2008 status-arg > status-arg = current-keyword / obsolete-keyword / deprecated-keyword config-stmt = config-keyword sep config-arg-str stmtend config-arg-str = < a string which matches the rule config-arg > config-arg = true-keyword / false-keyword mandatory-stmt = mandatory-keyword sep mandatory-arg-str stmtend mandatory-arg-str = < a string which matches the rule mandatory-arg > mandatory-arg = true-keyword / false-keyword presence-stmt = presence-keyword sep string stmtend ordered-by-stmt = ordered-by-keyword sep ordered-by-arg-str stmtend ordered-by-arg-str = < a string which matches the rule ordered-by-arg > ordered-by-arg = user-keyword / system-keyword must-stmt = must-keyword sep string optsep (";" / "{" stmtsep ;; these stmts can appear in any order [error-message-stmt stmtsep] [error-app-tag-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") error-message-stmt = error-message-keyword sep string stmtend error-app-tag-stmt = error-app-tag-keyword sep string stmtend Bjorklund Expires November 6, 2008 [Page 133] Internet-Draft YANG May 2008 min-elements-stmt = min-elements-keyword sep min-value-str stmtend; min-value-str = < a string which matches the rule min-value > min-value = non-negative-decimal-value max-elements-stmt = max-elements-keyword sep max-value-str stmtend; max-value-str = < a string which matches the rule max-value > max-value = unbounded-keyword / positive-decimal-value value-stmt = value-keyword sep decimal-value stmtend grouping-stmt = grouping-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *((typedef-stmt / grouping-stmt) stmtsep) *(data-def-stmt stmtsep) "}") container-stmt = container-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order *(must-stmt stmtsep) [presence-stmt stmtsep] [config-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *((typedef-stmt / grouping-stmt) stmtsep) *(data-def-stmt stmtsep) "}") leaf-stmt = leaf-keyword sep identifier-str optsep "{" stmtsep ;; these stmts can appear in any order Bjorklund Expires November 6, 2008 [Page 134] Internet-Draft YANG May 2008 type-stmt stmtsep [units-stmt stmtsep] *(must-stmt stmtsep) [default-stmt stmtsep] [config-stmt stmtsep] [mandatory-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}" leaf-list-stmt = leaf-list-keyword sep identifier-str optsep "{" stmtsep ;; these stmts can appear in any order type-stmt stmtsep [units-stmt stmtsep] *(must-stmt stmtsep) [config-stmt stmtsep] [min-elements-stmt stmtsep] [max-elements-stmt stmtsep] [ordered-by-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}" list-stmt = list-keyword sep identifier-str optsep "{" stmtsep ;; these stmts can appear in any order *(must-stmt stmtsep) [key-stmt stmtsep] *(unique-stmt stmtsep) [config-stmt stmtsep] [min-elements-stmt stmtsep] [max-elements-stmt stmtsep] [ordered-by-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *((typedef-stmt / grouping-stmt) stmtsep) 1*(data-def-stmt stmtsep) "}" key-stmt = key-keyword sep key-arg-str stmtend key-arg-str = < a string which matches the rule key-arg > Bjorklund Expires November 6, 2008 [Page 135] Internet-Draft YANG May 2008 key-arg = 1*(identifier sep) unique-stmt = unique-keyword sep unique-arg-str stmtend unique-arg-str = < a string which matches the rule unique-arg > unique-arg = 1*(descendant-schema-nodeid 1*sp) choice-stmt = choice-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [default-stmt stmtsep] [mandatory-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *((short-case-stmt / case-stmt) stmtsep) "}") short-case-stmt = container-stmt / leaf-stmt / leaf-list-stmt / list-stmt / anyxml-stmt case-stmt = case-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *(case-data-def-stmt stmtsep) "}") anyxml-stmt = anyxml-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [config-stmt stmtsep] [mandatory-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") Bjorklund Expires November 6, 2008 [Page 136] Internet-Draft YANG May 2008 uses-stmt = uses-keyword sep identifier-ref-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *(refinement-stmt stmtsep) "}") refinement-stmt = refine-container-stmt / refine-leaf-stmt / refine-leaf-list-stmt / refine-list-stmt / refine-choice-stmt / refine-anyxml-stmt refine-leaf-stmt = leaf-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order *(must-stmt stmtsep) [default-stmt stmtsep] [config-stmt stmtsep] [mandatory-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") refine-leaf-list-stmt = leaf-list-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order *(must-stmt stmtsep) [config-stmt stmtsep] [min-elements-stmt stmtsep] [max-elements-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") refine-list-stmt = list-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order *(must-stmt stmtsep) [config-stmt stmtsep] [min-elements-stmt stmtsep] Bjorklund Expires November 6, 2008 [Page 137] Internet-Draft YANG May 2008 [max-elements-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *(refinement-stmt stmtsep) "}") refine-choice-stmt = choice-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [default-stmt stmtsep] [mandatory-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *(refine-case-stmt stmtsep) "}") refine-case-stmt = case-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [description-stmt stmtsep] [reference-stmt stmtsep] *(refinement-stmt stmtsep) "}") refine-container-stmt = container-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order *(must-stmt stmtsep) [presence-stmt stmtsep] [config-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *(refinement-stmt stmtsep) "}") refine-anyxml-stmt = anyxml-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [config-stmt stmtsep] [mandatory-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] "}") Bjorklund Expires November 6, 2008 [Page 138] Internet-Draft YANG May 2008 unknown-statement = prefix ":" identifier [sep string] optsep (";" / "{" *unknown-statement "}") augment-stmt = augment-keyword sep augment-arg-str optsep "{" stmtsep ;; these stmts can appear in any order [when-stmt stmtsep] [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] (([input-stmt stmtsep] [output-stmt stmtsep]) / 1*((data-def-stmt stmtsep) / (case-stmt stmtsep))) "}" augment-arg-str = < a string which matches the rule augment-arg > augment-arg = absolute-schema-nodeid / descendant-schema-nodeid when-stmt = when-keyword sep string stmtend rpc-stmt = rpc-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *((typedef-stmt / grouping-stmt) stmtsep) [input-stmt stmtsep] [output-stmt stmtsep] "}") input-stmt = input-keyword optsep "{" stmtsep ;; these stmts can appear in any order *((typedef-stmt / grouping-stmt) stmtsep) 1*(data-def-stmt stmtsep) "}" output-stmt = output-keyword optsep "{" stmtsep ;; these stmts can appear in any order Bjorklund Expires November 6, 2008 [Page 139] Internet-Draft YANG May 2008 *((typedef-stmt / grouping-stmt) stmtsep) 1*(data-def-stmt stmtsep) "}" notification-stmt = notification-keyword sep identifier-str optsep (";" / "{" stmtsep ;; these stmts can appear in any order [status-stmt stmtsep] [description-stmt stmtsep] [reference-stmt stmtsep] *((typedef-stmt / grouping-stmt) stmtsep) *(data-def-stmt stmtsep) "}") ;; Ranges range-expr-str = < a string which matches the rule range-expr > range-expr = optsep range-part *(optsep "|" optsep range-part) optsep range-part = range-boundary [optsep ".." optsep range-boundary] range-boundary = neginf-keyword / posinf-keyword / min-keyword / max-keyword / decimal-value / float-value ;; Lengths length-expr-str = < a string which matches the rule length-expr > length-expr = optsep length-part *(optsep "|" optsep length-part) optsep length-part = length-boundary [optsep ".." optsep length-boundary] length-boundary = min-keyword / max-keyword / non-negative-decimal-value ;; Date Bjorklund Expires November 6, 2008 [Page 140] Internet-Draft YANG May 2008 date-expr-str = < a string which matches the rule date-expr > date-expr = 4DIGIT "-" 2DIGIT "-" 2DIGIT ;; Schema Node Identifiers schema-nodeid = absolute-schema-nodeid / relative-schema-nodeid absolute-schema-nodeid = 1*("/" node-identifier) relative-schema-nodeid = descendant-schema-nodeid / (("." / "..") "/" *relative-schema-nodeid) descendant-schema-nodeid = node-identifier absolute-schema-nodeid node-identifier = [prefix ":"] identifier ;; Instance Identifiers instance-identifier-str = < a string which matches the rule instance-identifier > instance-identifier = absolute-instid / relative-instid absolute-instid = 1*("/" (node-identifier *predicate)) relative-instid = descendant-instid / (("." / "..") "/" *relative-instid) descendant-instid = node-identifier *predicate absolute-instid predicate = "[" *WSP predicate-expr *WSP "]" predicate-expr = (node-identifier / ".") *WSP "=" *WSP ((DQUOTE string DQUOTE) / (SQUOTE string SQUOTE)) Bjorklund Expires November 6, 2008 [Page 141] Internet-Draft YANG May 2008 ;; keyref path path-arg-str = < a string which matches the rule path-arg > path-arg = absolute-path-arg / relative-path-arg absolute-path-arg = 1*("/" (node-identifier *path-predicate)) relative-path-arg = descendant-path-arg / (".." "/" *relative-path-arg) descendant-path-arg = node-identifier *path-predicate absolute-path-arg path-predicate = "[" *WSP path-equality-expr *WSP "]" path-equality-expr = node-identifier *WSP "=" *WSP path-key-expr path-key-expr = this-variable-keyword "/" rel-path-keyexpr rel-path-keyexpr = 1*(".." "/") *(node-identifier "/") node-identifier ;;; Keywords, using abnfgen's syntax for case-sensitive strings ;; statment keywords anyxml-keyword = 'anyxml' argument-keyword = 'argument' augment-keyword = 'augment' belongs-to-keyword = 'belongs-to' bit-keyword = 'bit' case-keyword = 'case' choice-keyword = 'choice' config-keyword = 'config' contact-keyword = 'contact' container-keyword = 'container' default-keyword = 'default' description-keyword = 'description' enum-keyword = 'enum' error-app-tag-keyword = 'error-app-tag' error-message-keyword = 'error-message' extension-keyword = 'extension' grouping-keyword = 'grouping' import-keyword = 'import' include-keyword = 'include' Bjorklund Expires November 6, 2008 [Page 142] Internet-Draft YANG May 2008 input-keyword = 'input' key-keyword = 'key' leaf-keyword = 'leaf' leaf-list-keyword = 'leaf-list' length-keyword = 'length' list-keyword = 'list' mandatory-keyword = 'mandatory' max-elements-keyword = 'max-elements' min-elements-keyword = 'min-elements' module-keyword = 'module' must-keyword = 'must' namespace-keyword = 'namespace' notification-keyword = 'notification' ordered-by-keyword = 'ordered-by' organization-keyword = 'organization' output-keyword = 'output' path-keyword = 'path' pattern-keyword = 'pattern' position-keyword = 'position' prefix-keyword = 'prefix' presence-keyword = 'presence' range-keyword = 'range' reference-keyword = 'reference' revision-keyword = 'revision' rpc-keyword = 'rpc' status-keyword = 'status' submodule-keyword = 'submodule' type-keyword = 'type' typedef-keyword = 'typedef' unique-keyword = 'unique' units-keyword = 'units' uses-keyword = 'uses' value-keyword = 'value' when-keyword = 'when' yang-version-keyword = 'yang-version' yin-element-keyword = 'yin-element' ;; other keywords current-keyword = 'current' deprecated-keyword = 'deprecated' false-keyword = 'false' max-keyword = 'max' min-keyword = 'min' nan-keyword = 'NaN' neginf-keyword = '-INF' obsolete-keyword = 'obsolete' posinf-keyword = 'INF' Bjorklund Expires November 6, 2008 [Page 143] Internet-Draft YANG May 2008 system-keyword = 'system' this-variable-keyword = '$this' true-keyword = 'true' unbounded-keyword = 'unbounded' user-keyword = 'user' ;; Basic Rules keyword = [prefix ":"] identifier prefix-str = < a string which matches the rule prefix > prefix = identifier identifier-str = < a string which matches the rule identifier > identifier = (ALPHA / "_") *(ALPHA / DIGIT / "_" / "-" / ".") identifier-ref-str = < a string which matches the rule identifier-ref identifier-ref = [prefix ":"] identifier string = < an unquoted string as returned by the scanner > decimal-value = ("-" non-negative-decimal-value) / non-negative-decimal-value non-negative-decimal-value = "0" / positive-decimal-value positive-decimal-value = (non-zero-digit *DIGIT) zero-decimal-value = 1*DIGIT stmtend = ";" / "{" *unknown-statement "}" sep = 1*(WSP / line-break) ; unconditional separator optsep = *(WSP / line-break) stmtsep = *(WSP / line-break / unknown-statement) line-break = CRLF / LF Bjorklund Expires November 6, 2008 [Page 144] Internet-Draft YANG May 2008 non-zero-digit = %x31-39 float-value = neginf-keyword / posinf-keyword / nan-keyword / decimal-value "." zero-decimal-value *1("E" ("+"/"-") zero-decimal-value) SQUOTE = %x27 ; ' (Single Quote) ;; ;; RFC 4234 core rules. ;; ALPHA = %x41-5A / %x61-7A ; A-Z / a-z CR = %x0D ; carriage return CRLF = CR LF ; Internet standard newline DIGIT = %x30-39 ; 0-9 DQUOTE = %x22 ; " (Double Quote) HEXDIG = DIGIT / %x61 / %x62 / %x63 / %x64 / %x65 / %x66 ; only lower-case a..f HTAB = %x09 ; horizontal tab LF = %x0A ; linefeed SP = %x20 ; space VCHAR = %x21-7E ; visible (printing) characters WSP = SP / HTAB ; white space Bjorklund Expires November 6, 2008 [Page 145] Internet-Draft YANG May 2008 Appendix E. Error Responses for YANG Related Errors A number of NETCONF error responses are defined for error cases related to the data-model handling. If the relevant YANG statement has an "error-app-tag" substatement, that overrides the default value specified below. E.1. Error Message for Data that Violates a YANG unique Statement: If a NETCONF operation would result in configuration data where a unique constraint is invalidated, the following error is returned: Tag: operation-failed Error-app-tag: data-not-unique Error-info: : Contains an instance identifier which points to a leaf which invalidates the unique constraint. This element is present once for each leaf invalidating the unique constraint. The element is in the YANG namespace ("urn:ietf:params:xml:ns:yang:1" [XXX IANA]). E.2. Error Message for Data that Violates a YANG max-elements Statement: If a NETCONF operation would result in configuration data where a list or a leaf-list would have too many entries the following error is returned: Tag: operation-failed Error-app-tag: too-many-elements E.3. Error Message for Data that Violates a YANG min-elements Statement: If a NETCONF operation would result in configuration data where a list or a leaf-list would have too few entries the following error is returned: Tag: operation-failed Error-app-tag: too-few-elements E.4. Error Message for Data that Violates a YANG must or when statement, a length, range or pattern restriction: If a NETCONF operation would result in configuration data where the restrictions imposed by a "must", "when", "length", "range" or Bjorklund Expires November 6, 2008 [Page 146] Internet-Draft YANG May 2008 "pattern" statement is violated the following error is returned: Tag: operation-failed Error-app-tag: data-restriction-violation E.5. Error Message for the "insert" Operation If the "insert" and "key" or "value" attributes are used in an for a list or leaf-list node, and the "key" or "value" refers to a non-existing instance, the following error is returned: Tag: bad-attribute Error-app-tag: missing-instance Bjorklund Expires November 6, 2008 [Page 147] Internet-Draft YANG May 2008 Appendix F. Why We Need a New Modeling Language There have been many discussions about whether the IETF should design its own language or use an existing one. The YANG designers believe strongly that existing languages are not the right answer. YANG is based on languages used actively for development of NETCONF- based management systems. As such, the design of YANG is based heavily on requirements placed upon those languages by their users and the experience of writing NETCONF data models in vendor specific languages. During previous implementations that were input to YANG, developers realized that they didn't want to read or write data models written with XSD (or RelaxNG or RelaxNG compact), so the languages were based on something "home grown" designed for the developers who would be writing models and implementing them on devices. F.1. Why not XSD? There are several reasons for not using XSD, such as: o XSD is too expressive, and gives too much freedom in allowable XML content. Without restrictions on its use and very clear guidelines, we think it will be very difficult to make interoperable XSD models. For example, there are constructs such as xs:redefine that would have to be disallowed. o XSD is not expressive enough for NETCONF data modeling. Additional semantics, such as state vs. config, integrity constraints, error-messages, list order semantics, remote procedure call and remote procedure call parameter definitions, and notification definitions would have to be put in appinfo elements, essentially creating a new language contained in appinfo elements. o Operators and developers want models that are simple to read and text-based. XSD is very difficult to read and debug. In the NETCONF work, obvious bugs in the relatively simple protocol XSD went undetected for years. The phrase many seem to use is that XSD is "write-only". o Defenders of XSD often counter claims of complexity with availability of advanced tools, but the IETF cannot require such tools to read/write models. Rather, the IETF needs a simpler language that is text-based, patch-friendly, and grep-able. Bjorklund Expires November 6, 2008 [Page 148] Internet-Draft YANG May 2008 o From a process perspective, the IETF lacks any IETF change control and real input into the update process for XSD. Does all of this mean that XSD has no place in the NETCONF management picture? Clearly, the answer is no. XSD is an excellent formal description mechanism that applications can consume. XSD can be generated from the models defined in YANG. F.2. Why not RelaxNG RelaxNG is considered by many people a much simpler to understand and to use schema notation for XML documents compared to XSD. However, the reasons for not using RelaxNG are similar as for XSD: o RelaxNG is like XSD too expressive and gives too much freedom in allowable XML content (see above). o RelaxNG is like XSD not expressive enough for NETCONF data modeling (see above). o While RelaxNG may be simpler to read (especially the compact notation), when fully annotated with all needed features, it will likely become as difficult to read as XSD. o The IETF has no change control over RelaxNG. Like in the XSD case, it will be possible to generate RelaxNG from the models defined in YANG for the purpose to feed RelaxNG tools. But this will only cover the information needed to validate instance documents and some NETCONF specific information will be lost or buried in extensions generic tools will not understand. F.3. Why not SMIng SMIng has been designed to be protocol independent so that SMIng data models can be used with several management protocols. This is achieved by avoiding protocol details in the data model and by providing protocol binding information in so called protocol mappings. Unfortunately, protocol independence does not came for free and introduces complexity: o Protocol independence requires to work with an abstract naming system for managed objects which complicates the construction of data models and their mappings. o Error and exception handling can only be specified in abstract term in protocol independent data models. Bjorklund Expires November 6, 2008 [Page 149] Internet-Draft YANG May 2008 o Management protocols have different features to express persistency of (changes to) management objects. o All the items listed above make it non-trivial to write and review truly protocol independent data models. A NETCONF specific data modeling language like YANG makes it much easier to describe data models in a way that maps to NETCONF in a very straight-forward manner and has therefore been chosen as the best approach. Note that the design of YANG actually borrows heavily from the SMIng work. Bjorklund Expires November 6, 2008 [Page 150] Internet-Draft YANG May 2008 Appendix G. ChangeLog G.1. Version -00 Changes from draft-bjorklund-netconf-yang-02.txt o Fixed bug in grammar for bit-stmt o Fixed bugs in example XPath expressions o Added keyword 'presence' to the YIN mapping table Bjorklund Expires November 6, 2008 [Page 151] Internet-Draft YANG May 2008 Author's Address Martin Bjorklund (editor) Tail-f Systems Email: mbj@tail-f.com Bjorklund Expires November 6, 2008 [Page 152] Internet-Draft YANG May 2008 Full Copyright Statement Copyright (C) The IETF Trust (2008). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgment Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Bjorklund Expires November 6, 2008 [Page 153]