| NFSv4 Working Group | W. Adamson |
| Internet-Draft | NetApp |
| Intended status: Standards Track | N. Williams |
| Expires: April 28, 2015 | Cryptonector |
| October 25, 2014 |
Multiple NFSv4 Domain File System Requirements
draft-ietf-nfsv4-multi-domain-fs-reqs-00
This document describes constraints to the NFSv4.0 and NFSv4.1 protocols as well as the use of multi-domain capable file systems, name resolution services, and security services required to fully enable a multiple NFSv4 domain file system, such as a multiple NFSv4 domain Federated File System.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on April 28, 2015.
Copyright (c) 2014 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
An NFSv4 domain is defined as a set of users, groups and computers running NFSv4.0 [I-D.ietf-nfsv4-rfc3530bis] and NFSv4.1 [RFC5661] (hereafter referred to as NFSv4) protocols identified by an NFSv4 domain name.
The Federated File System (FedFS) [RFC5716] describes the requirements and administrative tools to construct a uniform NFSv4 file server based namespace that is capable of spanning a whole enterprise and that is easy to manage.
The FedFS is the standardized method of constructing and administrating an enterprise wide NFSv4 filesystem, and so is referenced in this document. The issues with multiple NFSv4 domain file systems described in this document apply to all multiple NFSv4 domain file systems, be they run as a FedFS or not.
Stand-alone NFSv4 domains can be run in many ways. While a FedFS can be run within all stand-alone NFSv4 domain configurations some of these configurations [StandAlone] are not compatible with joining a multiple NFSv4 domain FedFS namespace.
Multi NFSv4 domain file systems require support for global identities in name services, security services, and in the exporting of on-disk local identity representation. Many of the stand-alone NFSv4 domain deployments do not provide full support for global identities.
This document describes constraints to the NFSv4 protocols as well as the use of multi-domain capable file systems, name resolution services, and security services required to fully enable a multiple NFSv4 domain file system, such as a multiple NFSv4 domain FedFS.
NFSv4 servers deal with two kinds of identities: authentication identities (referred to here as "principals") and authorization identities ("users" and "groups" of users). NFSv4 supports multiple authentication methods, each authenticating an "initiator principal" (typically representing a user) to an "acceptor principal" (always corresponding to the NFSv4 server). NFSv4 does not prescribe how to represent authorization identities on file systems. All file access decisions constitute "authorization" and are made by NFSv4 servers using authorization context information and file metadata related to authorization, such as a file's access control list (ACL).
NFSv4 servers therefore must perform two kinds of mappings:
A Name Service such as LDAP often provides these mappings.
Many aspects of these mappings are entirely implementation specific, but some require multi-domain capable name resolution and security services in order to interoperate in a multiple NFSv4 domain file system.
NFSv4 servers use these mappings for:
In order to service as many environments as possible, the NFSv4 protocol is designed to allow administrators freedom to configure their NFSv4 domains as they please.
Stand-alone NFSv4 domains can be run in many ways. Here we list some stand-alone NFSv4 domain deployment examples focusing on the NFSv4 server's use of name service mappings [v4map] and security services deployment to demonstrate the need for some multiple NFSv4 domain constraints to the NFSv4 protocol, name service configuration, and security service choices.
Because all on-disk identities participating in a stand-alone NFSv4 domain belong to the same NFSv4 domain, stand-alone NFSv4 domain deployments have no requirement for exporting multi-domain capable file systems.
These examples are for a NFSv4 server exporting a 32bit UID/GID based file system, a typical deployment. These examples are listed in the order of increasing NFSv4 administrative complexity.
This example is the closest NFSv4 gets to being run as NFSv3.
File access: The AUTH_SYS RPC credential provides a UID as the authentication identity, and a list of GIDs as authorization context information. File access decisions require no name service interaction as the on-the-wire and on-disk representation are the same and the auth-to-authz UID and GID authorization context information is provided in the RPC credential.
Meta-data setting and listing: When the NFSv4 clients and servers implement a stringified UID/GID scheme, where a stringified UID or GID is used for the NFSv4 name@domain on-the-wire identity, then a name service is not required for file metadata listing as the UID or GID can be constructed from the stringified form on the fly by the server.
The next level of complexity is to not use a stringified UID/GID scheme for file metadata listing.
File access: This is the same as in Section 4.1.
Meta-data setting and listing: The NFSv4 server will need to use a name service for the wire-to-disk mappings to map between the on-the-wire name@domain syntax and the on-disk UID/GID representation. Often, the NFSv4 server will use the nsswitch interface for these mappings. A typical use of the nsswitch name service interface uses no domain component, just the uid attribute [RFC2307] (or login name) as the name component. This is no issue in a stand-alone NFSv4 domain deployment as the NFSv4 domain is known to the NFSv4 server and can combined with the login name to form the name@domain syntax after the return of the name service call.
This final example adds the complexity of RPCSEC_GSS with the Kerberos 5 GSS security mechanism.
File Access: The RPCSEC_GSS Kerberos credential provides a principal@REALM name as the authentication identity, and (as of this writing) no authorization context information. File access decisions therefore require a wire-to-disk mapping of the principal@REALM to a UID, and an auth-to-authz mapping to obtain the list of GIDs as the authorization context.
Deployments can use the nsswitch name service interface for the principal@REALM to UID mapping by stripping off the REALM portion. This requires that the principal portion of the principal@REALM matches the uid attribute [RFC2307] (or login name) of the user.
Meta-data setting and listing: This is the same as in Section 4.2.
Joining NFSv4 domains under a single file namespace imposes slightly on the NFSv4 administration freedom. Here we describe the required constraints.
NFSv4 uses a syntax of the form "name@domain" as the on wire representation of the "who" field of an NFSv4 access control entry (ACE) for users and groups. This design provides a level of indirection that allows NFSv4 clients and servers with different internal representations of authorization identity to interoperate even when referring to authorization identities from different NFSv4 domains.
Multiple NFSv4 domain capable sites need to meet the following requirements in order to ensure that NFSv4 clients and servers can map between name@domain and internal representations reliably. While some of these constraints are basic assumptions in NFSv4.0 [I-D.ietf-nfsv4-rfc3530bis] and NFSv4.1 [RFC5661], they need to be clearly stated for the multiple NFSv4 domain case.
Due to UID and GID collisions, stringified UID/GIDs MUST NOT be used in a multiple NFSv4 domain file system.
Note that for stand-alone NFSv4 domains it does not matter if the choice of the NFSv4 domain name is replicated by another stand-alone NFSv4 domain deployment. Indeed, if a stringified UID/GID scheme is used, or just UNIX mode bits are used (NFSv4 ACLs are not set or listed) and the simple nsswitch interface that strips the @domain and the @REALM is used, then the domain portion of name@domain can be ignored, and even be different for each client and server in the domain.
Here we address the relationship between NFSv4 domain name and DNS domain name in a multiple NFSv4 domain deployment.
The definition of an NFSv4 domain name needs clarification to work in a multiple NFSv4 domain file system name space. Section 5.9 [RFC5661] loosely defines the NFSv4 domain name as a DNS domain name. This loose definition for the NFSv4 domain is a good one, as DNS domain names are globally unique. As noted above in Section 5.1, any choice of NFSv4 domain name can work within a stand-alone NFSv4 domain deployment whereas the NFSv4 domain is required to be unique in a multiple NFSv4 domain deployment.
A typical configuration is that there is a single NFSv4 domain that is served by a single DNS domain. In this case the NFSv4 domain name can be the same as the DNS domain name.
An NFSv4 domain can span multiple DNS domains. In this case, one of the DNS domain names can be chosen as the NFSv4 domain name.
Multiple NFSv4 domains can also share a DNS domain. In this case, only one of the NFSv4 domains can use the DNS domain name, the other NFSv4 domains must choose another unique NFSv4 domain name.
As noted above in Section 5.1, each name@domain is unique across the multiple NFSv4 domain namespace, and maps to a local representation of ID in each NFSv4 domain. This means that each NFSv4 domain has a single name resolution service exporting the NFSv4 domain local ID name space.
An NFSv4 domain administrator that wants to give NFSv4 local file access to a remote user from a remote NFSv4 domain needs to create a local ID for the remote user which can then be assigned on-disk and used for local access decisions. Since the local ID for the remote user must be able to be mapped to a name@remote-domain, only multi-domain capable file systems can be exported in a multiple NFSv4 domain FedFS.
We note that many file systems exported by NFSv4 use 32 bit POSIX UID and GIDs as a local ID form and as this local ID form has no domain component, these file systems are not domain aware and can not participate in a multiple NFSv4 domain FedFS. There are ways to overcome this deficiency, but these practices are beyond the scope of this document.
As described in [RFC5661] section 2.2.1.1 "RPC Security Flavors":
NFSv4.1 clients and servers MUST implement RPCSEC_GSS.
(This requirement to implement is not a requirement
to use.) Other flavors, such as AUTH_NONE, and AUTH_SYS,
MAY be implemented as well.
The underlying RPCSEC_GSS security mechanism used in a multiple NFSv4 domain FedFS is REQUIRED to employ a method of cross NFSv4 domain trust so that a principal from a security service in one NFSv4 domain can be authenticated in another NFSv4 domain that uses a security service with the same security mechanism. Kerberos, and PKU2U [I-D.zhu-pku2u] are examples of such security services.
The AUTH_NONE security flavor can be useful in a multiple NFSv4 domain FedFS to grant universal access to public data without any credentials.
The AUTH_SYS security flavor uses a host-based authentication model where the weakly authenticated host (the NFSv4 client) asserts the user's authorization identities using small integers, uidNumber, and gidNumber [RFC2307], as user and group identity representations. Because this authorization ID representation has no domain component, AUTH_SYS can only be used in a name space where all NFSv4 clients and servers share an [RFC2307] name service. A shared name service is required because uidNumbers and gidNumbers are passed in the RPC credential; there is no negotiation of namespace in AUTH_SYS. Collisions can occur if multiple name services are used, so AUTH_SYS MUST NOT be used in a multiple NFSv4 domain file system.
As noted above in Section 5.2, caveat AUTH_NULL, multiple NFSv4 domain security services are RPCSEC_GSS based with the Kerberos 5 security mechanism being the most commonly (and as of this writing, the only) deployed service.
A single Kerberos 5 security service per NFSv4 domain with the upper case NFSv4 domain name as the Kerberos 5 REALM name is a common deployment.
Multiple security services per NFSv4 domain is allowed, and brings the issue of mapping multiple Kerberos 5 principal@REALMs to the same local ID. Methods of achieving this are beyond the scope of this document.
When an RPCSEC_GSS principal is seeking access to files on an NFSv4 server, after authenticating the principal, the server must obtain in a secure manner the principal's authorization context information from an authoritative source such as the name service in the principal's NFSv4 domain.
In the stand-alone NFSv4 domain case where the principal is seeking access to files on an NFSv4 server in the principal's home NFSv4 domain, the server administrator has knowledge of the local policies and methods for obtaining the principal's authorization information and the mappings to local representation of identity from an authoritative source. E.g., the administrator can configure secure access to the local NFSv4 domain name service.
In the multiple NFSv4 domain case where a principal is seeking access to files on an NFSv4 server not in the principal's home NFSv4 domain, the server is REQUIRED to obtain in a secure manner the principal's authorization context information from an authoritative source. In this case there is no assumption of:
There are several methods the NFSv4 server can use to obtain the NFSv4 domain authoritative authorization information for a remote principal from an authoritative source. While any detail is beyond the scope of this document, some general methods are listed here.
Revisiting the stand-alone [StandAlone] NFSv4 domain deployment examples, we note that due to the use of AUTH_SYS, neither Section 4.1 nor Section 4.2 configurations are suitable for multiple NFSv4 domain deployments.
The Section 4.3 configuration example can participate in a multiple NFSv4 domain FedFS deployment if:
There are no security considerations introduced by this document beyond those described in NFSv4.0 [I-D.ietf-nfsv4-rfc3530bis] and NFSv4.1 [RFC5661].
Andy Adamson would like to thank NetApp, Inc. for its funding of his time on this project.
We thank Chuck Lever, Tom Haynes, Brian Reitz, and Bruce Fields for their review.