OAuth Working Group M. Jones Internet-Draft Microsoft Intended status: Standards Track J. Bradley Expires: April 18, 2013 Ping Identity N. Sakimura NRI October 15, 2012 JSON Web Token (JWT) draft-ietf-oauth-json-web-token-04 Abstract JSON Web Token (JWT) is a means of representing claims to be transferred between two parties. The claims in a JWT are encoded as a JavaScript Object Notation (JSON) object that is digitally signed or MACed using JSON Web Signature (JWS) and/or encrypted using JSON Web Encryption (JWE). The suggested pronunciation of JWT is the same as the English word "jot". Status of this Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on April 18, 2013. Copyright Notice Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of Jones, et al. Expires April 18, 2013 [Page 1] Internet-Draft JSON Web Token (JWT) October 2012 publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Jones, et al. Expires April 18, 2013 [Page 2] Internet-Draft JSON Web Token (JWT) October 2012 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1. Notational Conventions . . . . . . . . . . . . . . . . . . 5 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. JSON Web Token (JWT) Overview . . . . . . . . . . . . . . . . 6 3.1. Example JWT . . . . . . . . . . . . . . . . . . . . . . . 7 4. JWT Claims . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4.1. Reserved Claim Names . . . . . . . . . . . . . . . . . . . 8 4.1.1. "exp" (Expiration Time) Claim . . . . . . . . . . . . 8 4.1.2. "nbf" (Not Before) Claim . . . . . . . . . . . . . . . 9 4.1.3. "iat" (Issued At) Claim . . . . . . . . . . . . . . . 9 4.1.4. "iss" (Issuer) Claim . . . . . . . . . . . . . . . . . 9 4.1.5. "aud" (Audience) Claim . . . . . . . . . . . . . . . . 9 4.1.6. "prn" (Principal) Claim . . . . . . . . . . . . . . . 9 4.1.7. "jti" (JWT ID) Claim . . . . . . . . . . . . . . . . . 10 4.1.8. "typ" (Type) Claim . . . . . . . . . . . . . . . . . . 10 4.2. Public Claim Names . . . . . . . . . . . . . . . . . . . . 10 4.3. Private Claim Names . . . . . . . . . . . . . . . . . . . 10 5. JWT Header . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5.1. "typ" (Type) Header Parameter . . . . . . . . . . . . . . 11 5.2. "cty" (Content Type) Header Parameter . . . . . . . . . . 11 6. Plaintext JWTs . . . . . . . . . . . . . . . . . . . . . . . . 11 6.1. Example Plaintext JWT . . . . . . . . . . . . . . . . . . 11 7. Rules for Creating and Validating a JWT . . . . . . . . . . . 12 8. Cryptographic Algorithms . . . . . . . . . . . . . . . . . . . 14 9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 15 9.1. JSON Web Token Claims Registry . . . . . . . . . . . . . . 15 9.1.1. Registration Template . . . . . . . . . . . . . . . . 16 9.1.2. Initial Registry Contents . . . . . . . . . . . . . . 16 9.2. Sub-Namespace Registration of urn:ietf:params:oauth:token-type:jwt . . . . . . . . . . . 17 9.2.1. Registry Contents . . . . . . . . . . . . . . . . . . 17 9.3. JSON Web Signature and Encryption Type Values Registration . . . . . . . . . . . . . . . . . . . . . . . 17 9.3.1. Registry Contents . . . . . . . . . . . . . . . . . . 17 9.4. Media Type Registration . . . . . . . . . . . . . . . . . 17 9.4.1. Registry Contents . . . . . . . . . . . . . . . . . . 17 10. Security Considerations . . . . . . . . . . . . . . . . . . . 18 11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 18 11.1. Normative References . . . . . . . . . . . . . . . . . . . 18 11.2. Informative References . . . . . . . . . . . . . . . . . . 19 Appendix A. Example Encrypted JWT . . . . . . . . . . . . . . . . 20 Appendix B. Relationship of JWTs to SAML Tokens . . . . . . . . . 21 Appendix C. Relationship of JWTs to Simple Web Tokens (SWTs) . . 21 Appendix D. Acknowledgements . . . . . . . . . . . . . . . . . . 21 Appendix E. Open Issues . . . . . . . . . . . . . . . . . . . . . 22 Appendix F. Document History . . . . . . . . . . . . . . . . . . 22 Jones, et al. Expires April 18, 2013 [Page 3] Internet-Draft JSON Web Token (JWT) October 2012 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 23 Jones, et al. Expires April 18, 2013 [Page 4] Internet-Draft JSON Web Token (JWT) October 2012 1. Introduction JSON Web Token (JWT) is a compact token format intended for space constrained environments such as HTTP Authorization headers and URI query parameters. JWTs encode claims to be transmitted as a JavaScript Object Notation (JSON) [RFC4627] object that is base64url encoded and digitally signed or MACed and/or encrypted. Signing and MACing is performed using JSON Web Signature (JWS) [JWS]. Encryption is performed using JSON Web Encryption (JWE) [JWE]. The suggested pronunciation of JWT is the same as the English word "jot". 1.1. Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in Key words for use in RFCs to Indicate Requirement Levels [RFC2119]. 2. Terminology JSON Web Token (JWT) A string representing a set of claims as a JSON object that is digitally signed or MACed and/or encrypted. The string consists of multiple parts, the first being the Encoded JWT Header, plus additional parts depending upon the contents of the header, with the parts being separated by period ('.') characters, and each part containing base64url encoded content. Base64url Encoding The URL- and filename-safe Base64 encoding described in RFC 4648 [RFC4648], Section 5, with the (non URL- safe) '=' padding characters omitted, as permitted by Section 3.2. (See Appendix C of [JWS] for notes on implementing base64url encoding without padding.) JWT Header A string representing a JSON object that describes the cryptographic operations applied to the JWT. When the JWT is digitally signed or MACed, the JWT Header is a JWS Header. When the JWT is encrypted, the JWT Header is a JWE Header. Header Parameter Name The name of a member of the JSON object representing a JWT Header. Header Parameter Value The value of a member of the JSON object representing a JWT Header. Jones, et al. Expires April 18, 2013 [Page 5] Internet-Draft JSON Web Token (JWT) October 2012 JWT Claims Set A string representing a JSON object that contains the claims conveyed by the JWT. When the JWT is digitally signed or MACed, the bytes of the UTF-8 representation of the JWT Claims Set are base64url encoded to create the Encoded JWS Payload. When the JWT is encrypted, the bytes of the UTF-8 representation of the JWT Claims Set are used as the JWE Plaintext. Claim Name The name of a member of the JSON object representing a JWT Claims Set. Claim Value The value of a member of the JSON object representing a JWT Claims Set. Encoded JWT Header Base64url encoding of the bytes of the UTF-8 [RFC3629] representation of the JWT Header. Collision Resistant Namespace A namespace that allows names to be allocated in a manner such that they are highly unlikely to collide with other names. For instance, collision resistance can be achieved through administrative delegation of portions of the namespace or through use of collision-resistant name allocation functions. Examples of Collision Resistant Namespaces include: Domain Names, Object Identifiers (OIDs) as defined in the ITU-T X.660 and X.670 Recommendation series, and Universally Unique IDentifiers (UUIDs) [RFC4122]. When using an administratively delegated namespace, the definer of a name needs to take reasonable precautions to ensure they are in control of the portion of the namespace they use to define the name. StringOrURI A JSON string value, with the additional requirement that while arbitrary string values MAY be used, any value containing a ":" character MUST be a URI [RFC3986]. StringOrURI values are compared as case-sensitive strings with no transformations or canonicalizations applied. IntDate A JSON numeric value representing the number of seconds from 1970-01-01T0:0:0Z UTC until the specified UTC date/time. See RFC 3339 [RFC3339] for details regarding date/times in general and UTC in particular. 3. JSON Web Token (JWT) Overview JWTs represent a set of claims as a JSON object that is base64url encoded and digitally signed or MACed and/or encrypted. The JWT Claims Set represents this JSON object. As per RFC 4627 [RFC4627] Section 2.2, the JSON object consists of zero or more name/value pairs (or members), where the names are strings and the values are Jones, et al. Expires April 18, 2013 [Page 6] Internet-Draft JSON Web Token (JWT) October 2012 arbitrary JSON values. These members are the claims represented by the JWT. The member names within the JWT Claims Set are referred to as Claim Names. The corresponding values are referred to as Claim Values. The bytes of the UTF-8 representation of the JWT Claims Set are digitally signed or MACed in the manner described in JSON Web Signature (JWS) [JWS] and/or encrypted in the manner described in JSON Web Encryption (JWE) [JWE]. The contents of the JWT Header describe the cryptographic operations applied to the JWT Claims Set. If the JWT Header is a JWS Header, the claims are digitally signed or MACed. If the JWT Header is a JWE Header, the claims are encrypted. A JWT is represented as a JWS or JWE. The number of parts is dependent upon the representation of the resulting JWS or JWE. 3.1. Example JWT The following example JWT Header declares that the encoded object is a JSON Web Token (JWT) and the JWT is MACed using the HMAC SHA-256 algorithm: {"typ":"JWT", "alg":"HS256"} Base64url encoding the bytes of the UTF-8 representation of the JWT Header yields this Encoded JWS Header value, which is used as the Encoded JWT Header: eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9 The following is an example of a JWT Claims Set: {"iss":"joe", "exp":1300819380, "http://example.com/is_root":true} Base64url encoding the bytes of the UTF-8 representation of the JSON Claims Set yields this Encoded JWS Payload (with line breaks for display purposes only): eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly 9leGFtcGxlLmNvbS9pc19yb290Ijp0cnVlfQ Signing the Encoded JWS Header and Encoded JWS Payload with the HMAC Jones, et al. Expires April 18, 2013 [Page 7] Internet-Draft JSON Web Token (JWT) October 2012 SHA-256 algorithm and base64url encoding the signature in the manner specified in [JWS], yields this Encoded JWS Signature: dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk Concatenating these parts in this order with period ('.') characters between the parts yields this complete JWT (with line breaks for display purposes only): eyJ0eXAiOiJKV1QiLA0KICJhbGciOiJIUzI1NiJ9 . eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt cGxlLmNvbS9pc19yb290Ijp0cnVlfQ . dBjftJeZ4CVP-mB92K27uhbUJU1p1r_wW1gFWFOEjXk This computation is illustrated in more detail in Appendix A.1 of [JWS]. See Appendix A for an example of an encrypted JWT. 4. JWT Claims The JWT Claims Set represents a JSON object whose members are the claims conveyed by the JWT. The Claim Names within this object MUST be unique; JWTs with duplicate Claim Names MUST be rejected. Note however, that the set of claims that a JWT must contain to be considered valid is context-dependent and is outside the scope of this specification. When used in a security-related context, implementations MUST understand and support all of the claims present; otherwise, the JWT MUST be rejected for processing. There are three classes of JWT Claim Names: Reserved Claim Names, Public Claim Names, and Private Claim Names. 4.1. Reserved Claim Names The following claim names are reserved. None of the claims defined below are intended to be mandatory, but rather, provide a starting point for a set of useful, interoperable claims. All the names are short because a core goal of JWTs is for the tokens to be compact. Additional reserved claim names MAY be defined via the IANA JSON Web Token Claims registry Section 9.1. 4.1.1. "exp" (Expiration Time) Claim The "exp" (expiration time) claim identifies the expiration time on or after which the token MUST NOT be accepted for processing. The processing of the "exp" claim requires that the current date/time Jones, et al. Expires April 18, 2013 [Page 8] Internet-Draft JSON Web Token (JWT) October 2012 MUST be before the expiration date/time listed in the "exp" claim. Implementers MAY provide for some small leeway, usually no more than a few minutes, to account for clock skew. Its value MUST be a number containing an IntDate value. This claim is OPTIONAL. 4.1.2. "nbf" (Not Before) Claim The "nbf" (not before) claim identifies the time before which the token MUST NOT be accepted for processing. The processing of the "nbf" claim requires that the current date/time MUST be after or equal to the not-before date/time listed in the "nbf" claim. Implementers MAY provide for some small leeway, usually no more than a few minutes, to account for clock skew. Its value MUST be a number containing an IntDate value. This claim is OPTIONAL. 4.1.3. "iat" (Issued At) Claim The "iat" (issued at) claim identifies the time at which the JWT was issued. This claim can be used to determine the age of the token. Its value MUST be a number containing an IntDate value. This claim is OPTIONAL. 4.1.4. "iss" (Issuer) Claim The "iss" (issuer) claim identifies the principal that issued the JWT. The processing of this claim is generally application specific. The "iss" value is a case sensitive string containing a StringOrURI value. This claim is OPTIONAL. 4.1.5. "aud" (Audience) Claim The "aud" (audience) claim identifies the audience that the JWT is intended for. The principal intended to process the JWT MUST be identified with the value of the audience claim. If the principal processing the claim does not identify itself with the identifier in the "aud" claim value then the JWT MUST be rejected. The interpretation of the audience value is generally application specific. The "aud" value is a case sensitive string containing a StringOrURI value. This claim is OPTIONAL. 4.1.6. "prn" (Principal) Claim The "prn" (principal) claim identifies the subject of the JWT. The processing of this claim is generally application specific. The "prn" value is a case sensitive string containing a StringOrURI value. This claim is OPTIONAL. Jones, et al. Expires April 18, 2013 [Page 9] Internet-Draft JSON Web Token (JWT) October 2012 4.1.7. "jti" (JWT ID) Claim The "jti" (JWT ID) claim provides a unique identifier for the JWT. The identifier value MUST be assigned in a manner that ensures that there is a negligible probability that the same value will be accidentally assigned to a different data object. The "jti" claim can be used to prevent the JWT from being replayed. The "jti" value is a case sensitive string. This claim is OPTIONAL. 4.1.8. "typ" (Type) Claim The "typ" (type) claim is used to declare a type for the contents of this JWT Claims Set. The "typ" value is a case sensitive string. This claim is OPTIONAL. The values used for the "typ" claim come from the same value space as the "typ" header parameter, with the same rules applying. 4.2. Public Claim Names Claim names can be defined at will by those using JWTs. However, in order to prevent collisions, any new claim name SHOULD either be registered in the IANA JSON Web Token Claims registry Section 9.1 or be a URI that contains a Collision Resistant Namespace. 4.3. Private Claim Names A producer and consumer of a JWT may agree to any claim name that is not a Reserved Name Section 4.1 or a Public Name Section 4.2. Unlike Public Names, these private names are subject to collision and should be used with caution. 5. JWT Header The members of the JSON object represented by the JWT Header describe the cryptographic operations applied to the JWT and optionally, additional properties of the JWT. The member names within the JWT Header are referred to as Header Parameter Names. These names MUST be unique; JWTs with duplicate Header Parameter Names MUST be rejected. The corresponding values are referred to as Header Parameter Values. Implementations MUST understand the entire contents of the header; otherwise, the JWT MUST be rejected for processing. JWS Header Parameters are defined by [JWS]. JWE Header Parameters are defined by [JWE]. This specification further specifies the use Jones, et al. Expires April 18, 2013 [Page 10] Internet-Draft JSON Web Token (JWT) October 2012 of the following header parameter in both the cases where the JWT is a JWS and where it is a JWE. 5.1. "typ" (Type) Header Parameter The "typ" (type) header parameter is used to declare the type of this object. If present, it is RECOMMENDED that its value be either "JWT" or "urn:ietf:params:oauth:token-type:jwt" to indicate that this object is a JWT. The "typ" value is a case sensitive string. This header parameter is OPTIONAL. 5.2. "cty" (Content Type) Header Parameter The "cty" (content type) header parameter is used to declare structural information about the JWT. Its value MUST be a string. In the normal case where nested signing or encryption operations are not employed, the use of this header parameter is NOT RECOMMENDED. In the case that nested signing or encryption is employed, the use of this header parameter is REQUIRED; in this case, the value MUST be "JWT", to indicate that a nested JWT is carried in this JWT. The values used for the "cty" header parameter come from the same value space as the "typ" header parameter, with the same rules applying. 6. Plaintext JWTs To support use cases where the JWT content is secured by a means other than a signature and/or encryption contained within the token (such as a signature on a data structure containing the token), JWTs MAY also be created without a signature or encryption. A plaintext JWT is a JWS using the "none" JWS "alg" header parameter value defined in JSON Web Algorithms (JWA) [JWA]; it is a JWS with an empty JWS Signature value. 6.1. Example Plaintext JWT The following example JWT Header declares that the encoded object is a Plaintext JWT: {"alg":"none"} Base64url encoding the bytes of the UTF-8 representation of the JWT Header yields this Encoded JWT Header: eyJhbGciOiJub25lIn0 Jones, et al. Expires April 18, 2013 [Page 11] Internet-Draft JSON Web Token (JWT) October 2012 The following is an example of a JWT Claims Set: {"iss":"joe", "exp":1300819380, "http://example.com/is_root":true} Base64url encoding the bytes of the UTF-8 representation of the JSON Claims Set yields this Encoded JWS Payload (with line breaks for display purposes only): eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt cGxlLmNvbS9pc19yb290Ijp0cnVlfQ The Encoded JWS Signature is the empty string. Concatenating these parts in this order with period ('.') characters between the parts yields this complete JWT (with line breaks for display purposes only): eyJhbGciOiJub25lIn0 . eyJpc3MiOiJqb2UiLA0KICJleHAiOjEzMDA4MTkzODAsDQogImh0dHA6Ly9leGFt cGxlLmNvbS9pc19yb290Ijp0cnVlfQ . 7. Rules for Creating and Validating a JWT To create a JWT, one MUST perform these steps. The order of the steps is not significant in cases where there are no dependencies between the inputs and outputs of the steps. 1. Create a JWT Claims Set containing the desired claims. Note that white space is explicitly allowed in the representation and no canonicalization is performed before encoding. 2. Let the Message be the bytes of the UTF-8 representation of the JWT Claims Set. 3. Create a JWT Header containing the desired set of header parameters. The JWT MUST conform to either the [JWS] or [JWE] specifications. Note that white space is explicitly allowed in the representation and no canonicalization is performed before encoding. 4. Base64url encode the bytes of the UTF-8 representation of the JWT Header. Let this be the Encoded JWT Header. Jones, et al. Expires April 18, 2013 [Page 12] Internet-Draft JSON Web Token (JWT) October 2012 5. Depending upon whether the JWT is a JWS or JWE, there are two cases: * If the JWT is a JWS, create a JWS using the JWT Header as the JWS Header and the Message as the JWS Payload; all steps specified in [JWS] for creating a JWS MUST be followed. * Else, if the JWT is a JWE, create a JWE using the JWT Header as the JWE Header and the Message as the JWE Plaintext; all steps specified in [JWE] for creating a JWE MUST be followed. 6. If a nested signing or encryption operation will be performed, let the Message be the JWS or JWE, and return to Step 3, using a "cty" (content type) value of "JWT" in the new JWT Header created in that step. 7. Otherwise, let the resulting JWT be the JWS or JWE. When validating a JWT the following steps MUST be taken. The order of the steps is not significant in cases where there are no dependencies between the inputs and outputs of the steps. If any of the listed steps fails then the token MUST be rejected for processing. 1. The JWT MUST contain at least one period ('.') character. 2. Let the Encoded JWT Header be the portion of the JWT before the first period ('.') character. 3. The Encoded JWT Header MUST be successfully base64url decoded following the restriction given in this specification that no padding characters have been used. 4. The resulting JWT Header MUST be completely valid JSON syntax conforming to RFC 4627 [RFC4627]. 5. The resulting JWT Header MUST be validated to only include parameters and values whose syntax and semantics are both understood and supported. 6. Determine whether the JWT is a JWS or a JWE by examining the "alg" (algorithm) header value and optionally, the "enc" (encryption method) header value, if present. 7. Depending upon whether the JWT is a JWS or JWE, there are two cases: Jones, et al. Expires April 18, 2013 [Page 13] Internet-Draft JSON Web Token (JWT) October 2012 * If the JWT is a JWS, all steps specified in [JWS] for validating a JWS MUST be followed. Let the Message be the result of base64url decoding the JWS Payload. * Else, if the JWT is a JWE, all steps specified in [JWE] for validating a JWE MUST be followed. Let the Message be the JWE Plaintext. 8. If the JWT Header contains a "cty" (content type) value of "JWT", then the Message contains a JWT that was the subject of nested signing or encryption operations. In this case, return to Step 1, using the Message as the JWT. 9. Otherwise, let the JWT Claims Set be the Message. 10. The JWT Claims Set MUST be completely valid JSON syntax conforming to RFC 4627 [RFC4627]. 11. When used in a security-related context, the JWT Claims Set MUST be validated to only include claims whose syntax and semantics are both understood and supported. Processing a JWT inevitably requires comparing known strings to values in the token. For example, in checking what the algorithm is, the Unicode string encoding "alg" will be checked against the member names in the JWT Header to see if there is a matching header parameter name. A similar process occurs when determining if the value of the "alg" header parameter represents a supported algorithm. Comparisons between JSON strings and other Unicode strings MUST be performed as specified below: 1. Remove any JSON applied escaping to produce an array of Unicode code points. 2. Unicode Normalization [USA15] MUST NOT be applied at any point to either the JSON string or to the string it is to be compared against. 3. Comparisons between the two strings MUST be performed as a Unicode code point to code point equality comparison. 8. Cryptographic Algorithms JWTs use JSON Web Signature (JWS) [JWS] and JSON Web Encryption (JWE) [JWE] to sign and/or encrypt the contents of the JWT. Jones, et al. Expires April 18, 2013 [Page 14] Internet-Draft JSON Web Token (JWT) October 2012 Of the JWS signing algorithms, only HMAC SHA-256 and "none" MUST be implemented by conforming JWT implementations. It is RECOMMENDED that implementations also support the RSA SHA-256 and ECDSA P-256 SHA-256 algorithms. Support for other algorithms and key sizes is OPTIONAL. If an implementation provides encryption capabilities, of the JWE encryption algorithms, only RSA-PKCS1-1.5 with 2048 bit keys, AES- 128-KW, AES-256-KW, AES-128-CBC, and AES-256-CBC MUST be implemented by conforming implementations. It is RECOMMENDED that implementations also support ECDH-ES with 256 bit keys, AES-128-GCM, and AES-256-GCM. Support for other algorithms and key sizes is OPTIONAL. 9. IANA Considerations 9.1. JSON Web Token Claims Registry This specification establishes the IANA JSON Web Token Claims registry for reserved JWT Claim Names. The registry records the reserved Claim Name and a reference to the specification that defines it. This specification registers the Claim Names defined in Section 4.1. Values are registered with a Specification Required [RFC5226] after a two-week review period on the [TBD]@ietf.org mailing list, on the advice of one or more Designated Experts. However, to allow for the allocation of values prior to publication, the Designated Expert(s) may approve registration once they are satisfied that such a specification will be published. Registration requests must be sent to the [TBD]@ietf.org mailing list for review and comment, with an appropriate subject (e.g., "Request for access token type: example"). [[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: claims-reg-review. ]] Within the review period, the Designated Expert(s) will either approve or deny the registration request, communicating this decision to the review list and IANA. Denials should include an explanation and, if applicable, suggestions as to how to make the request successful. IANA must only accept registry updates from the Designated Expert(s) and should direct all requests for registration to the review mailing list. Jones, et al. Expires April 18, 2013 [Page 15] Internet-Draft JSON Web Token (JWT) October 2012 9.1.1. Registration Template Claim Name: The name requested (e.g., "example"). This name is case sensitive. Names that match other registered names in a case insensitive manner SHOULD NOT be accepted. Change Controller: For Standards Track RFCs, state "IETF". For others, give the name of the responsible party. Other details (e.g., postal address, email address, home page URI) may also be included. Specification Document(s): Reference to the document(s) that specify the parameter, preferably including URI(s) that can be used to retrieve copies of the document(s). An indication of the relevant sections may also be included but is not required. 9.1.2. Initial Registry Contents o Claim Name: "exp" o Change Controller: IETF o Specification Document(s): Section 4.1.1 of [[ this document ]] o Claim Name: "nbf" o Change Controller: IETF o Specification Document(s): Section 4.1.2 of [[ this document ]] o Claim Name: "iat" o Change Controller: IETF o Specification Document(s): Section 4.1.3 of [[ this document ]] o Claim Name: "iss" o Change Controller: IETF o Specification Document(s): Section 4.1.4 of [[ this document ]] o Claim Name: "aud" o Change Controller: IETF o Specification Document(s): Section 4.1.5 of [[ this document ]] o Claim Name: "prn" o Change Controller: IETF o Specification Document(s): Section 4.1.6 of [[ this document ]] o Claim Name: "jti" o Change Controller: IETF Jones, et al. Expires April 18, 2013 [Page 16] Internet-Draft JSON Web Token (JWT) October 2012 o Specification Document(s): Section 4.1.7 of [[ this document ]] o Claim Name: "typ" o Change Controller: IETF o Specification Document(s): Section 4.1.8 of [[ this document ]] 9.2. Sub-Namespace Registration of urn:ietf:params:oauth:token-type:jwt 9.2.1. Registry Contents This specification registers the value "token-type:jwt" in the IANA urn:ietf:params:oauth registry established in An IETF URN Sub- Namespace for OAuth [RFC6755]. o URN: urn:ietf:params:oauth:token-type:jwt o Common Name: JSON Web Token (JWT) Token Type o Change Controller: IETF o Specification Document(s): [[this document]] 9.3. JSON Web Signature and Encryption Type Values Registration 9.3.1. Registry Contents This specification registers the "JWT" type value in the IANA JSON Web Signature and Encryption Type Values registry [JWS]: o "typ" Header Parameter Value: "JWT" o Abbreviation for MIME Type: application/jwt o Change Controller: IETF o Specification Document(s): Section 5.1 of [[ this document ]] 9.4. Media Type Registration 9.4.1. Registry Contents This specification registers the "application/jwt" Media Type [RFC2046] in the MIME Media Type registry [RFC4288] to indicate that the content is a JWT. o Type Name: application o Subtype Name: jwt o Required Parameters: n/a o Optional Parameters: n/a o Encoding considerations: JWT values are encoded as a series of base64url encoded values (some of which may be the empty string) separated by period ('.') characters Jones, et al. Expires April 18, 2013 [Page 17] Internet-Draft JSON Web Token (JWT) October 2012 o Security Considerations: See the Security Considerations section of this document o Interoperability Considerations: n/a o Published Specification: [[ this document ]] o Applications that use this media type: OpenID Connect, Mozilla Browser ID, Salesforce, Google, numerous others o Additional Information: Magic number(s): n/a, File extension(s): n/a, Macintosh file type code(s): n/a o Person & email address to contact for further information: Michael B. Jones, mbj@microsoft.com o Intended Usage: COMMON o Restrictions on Usage: none o Author: Michael B. Jones, mbj@microsoft.com o Change Controller: IETF 10. Security Considerations All of the security issues faced by any cryptographic application must be faced by a JWT/JWS/JWE/JWK agent. Among these issues are protecting the user's private key, preventing various attacks, and helping the user avoid mistakes such as inadvertently encrypting a message for the wrong recipient. The entire list of security considerations is beyond the scope of this document, but some significant concerns are listed here. All the security considerations in the JWS specification also apply to JWT, as do the JWE security considerations when encryption is employed. In particular, the JWS JSON Security Considerations and Unicode Comparison Security Considerations apply equally to the JWT Claims Set in the same manner that they do to the JWS Header. 11. References 11.1. Normative References [JWA] Jones, M., "JSON Web Algorithms (JWA)", October 2012. [JWE] Jones, M., Rescorla, E., and J. Hildebrand, "JSON Web Encryption (JWE)", October 2012. [JWS] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Signature (JWS)", October 2012. [RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types", RFC 2046, November 1996. Jones, et al. Expires April 18, 2013 [Page 18] Internet-Draft JSON Web Token (JWT) October 2012 [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC3339] Klyne, G., Ed. and C. Newman, "Date and Time on the Internet: Timestamps", RFC 3339, July 2002. [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, November 2003. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. [RFC4288] Freed, N. and J. Klensin, "Media Type Specifications and Registration Procedures", BCP 13, RFC 4288, December 2005. [RFC4627] Crockford, D., "The application/json Media Type for JavaScript Object Notation (JSON)", RFC 4627, July 2006. [RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, October 2006. [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 5226, May 2008. [RFC6755] Campbell, B. and H. Tschofenig, "An IETF URN Sub-Namespace for OAuth", RFC 6755, October 2012. [USA15] Davis, M., Whistler, K., and M. Duerst, "Unicode Normalization Forms", Unicode Standard Annex 15, 09 2009. 11.2. Informative References [CanvasApp] Facebook, "Canvas Applications", 2010. [JSS] Bradley, J. and N. Sakimura (editor), "JSON Simple Sign", September 2010. [MagicSignatures] Panzer (editor), J., Laurie, B., and D. Balfanz, "Magic Signatures", January 2011. [OASIS.saml-core-2.0-os] Cantor, S., Kemp, J., Philpott, R., and E. Maler, "Assertions and Protocol for the OASIS Security Assertion Markup Language (SAML) V2.0", OASIS Standard saml-core- Jones, et al. Expires April 18, 2013 [Page 19] Internet-Draft JSON Web Token (JWT) October 2012 2.0-os, March 2005. [RFC3275] Eastlake, D., Reagle, J., and D. Solo, "(Extensible Markup Language) XML-Signature Syntax and Processing", RFC 3275, March 2002. [RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally Unique IDentifier (UUID) URN Namespace", RFC 4122, July 2005. [SWT] Hardt, D. and Y. Goland, "Simple Web Token (SWT)", Version 0.9.5.1, November 2009. [W3C.CR-xml11-20021015] Cowan, J., "Extensible Markup Language (XML) 1.1", W3C CR CR-xml11-20021015, October 2002. Appendix A. Example Encrypted JWT This example encrypts the same claims as used in Section 3.1 to the recipient using RSAES-PKCS1-V1_5 and AES CBC. AES CBC does not have an integrated integrity check, so a separate integrity check calculation is performed using HMAC SHA-256, with separate encryption and integrity keys being derived from a master key using the Concat KDF with the SHA-256 digest function. The following example JWE Header (with line breaks for display purposes only) declares that: o the Content Master Key is encrypted to the recipient using the RSAES-PKCS1-V1_5 algorithm to produce the JWE Encrypted Key and o the Plaintext is encrypted using the AES CBC algorithm with a 128 bit key to produce the Ciphertext, with the integrity of the Ciphertext and the parameters used to create it being secured using the HMAC SHA-256 algorithm. {"alg":"RSA1_5","enc":"A128CBC+HS256"} Other than using the bytes of the UTF-8 representation of the JSON Claims Set from Section 3.1 as the plaintext value, the computation of this JWT is identical to the computation of the JWE in Appendix A.2 of [JWE], including the keys used. The final result in this example (with line breaks for display purposes only) is: Jones, et al. Expires April 18, 2013 [Page 20] Internet-Draft JSON Web Token (JWT) October 2012 eyJhbGciOiJSU0ExXzUiLCJlbmMiOiJBMTI4Q0JDK0hTMjU2In0. W_LXELSzOoofu8FGRt4WwXiTGfvC50hiiSV4DcgkUIY1nOnkJ4tHW4LiioZFvvLD ohAnuHs1K_29TMx8VQl8kLCxFgn6xxg5q5-UZzbcASgJIAupo7r5mzENbIrjK3bx H8aXSKJQ0icN-sEC54M8rKz2VYdPjZTpGcTHCI2suobyhA0Jwr3OJ7JBZiDJ1GSN O310isBrQcZQXKsMC9ne8P5jJEZSD3IHcTag502P0Rp8BxFV0Ld5OdfU_NmS69RD DxCZC6nV8Zz_n97nLE9vFrSOjXMyJoyqeORdvWGsiXPmD7fkE8a6BOw3-efYqeCj 5elo-kKrNcirBHxH96u-sw. AxY8DCtDaGlsbGljb3RoZQ. Wcyp1X4AaobxcNcVOqmLftbfg-t6yIy6yvxi0dNoWLroCbgUowHs8WeLWNj_ktrT lL3xL_cz3a2-DioHF5deqNmvyByjVR7Xc4QXBYcn0nE. tEkhyWYGI_VHL1WoDO23nPRC8w3LG53KaCm5HmavnA0 Appendix B. Relationship of JWTs to SAML Tokens SAML 2.0 [OASIS.saml-core-2.0-os] provides a standard for creating tokens with much greater expressivity and more security options than supported by JWTs. However, the cost of this flexibility and expressiveness is both size and complexity. In addition, SAML's use of XML [W3C.CR-xml11-20021015] and XML DSIG [RFC3275] only contributes to the size of SAML tokens. JWTs are intended to provide a simple token format that is small enough to fit into HTTP headers and query arguments in URIs. It does this by supporting a much simpler token model than SAML and using the JSON [RFC4627] object encoding syntax. It also supports securing tokens using Message Authentication Codes (MACs) and digital signatures using a smaller (and less flexible) format than XML DSIG. Therefore, while JWTs can do some of the things SAML tokens do, JWTs are not intended as a full replacement for SAML tokens, but rather as a compromise token format to be used when space is at a premium. Appendix C. Relationship of JWTs to Simple Web Tokens (SWTs) Both JWTs and Simple Web Tokens SWT [SWT], at their core, enable sets of claims to be communicated between applications. For SWTs, both the claim names and claim values are strings. For JWTs, while claim names are strings, claim values can be any JSON type. Both token types offer cryptographic protection of their content: SWTs with HMAC SHA-256 and JWTs with a choice of algorithms, including HMAC SHA-256, RSA SHA-256, and ECDSA P-256 SHA-256. Appendix D. Acknowledgements The authors acknowledge that the design of JWTs was intentionally Jones, et al. Expires April 18, 2013 [Page 21] Internet-Draft JSON Web Token (JWT) October 2012 influenced by the design and simplicity of Simple Web Tokens [SWT] and ideas for JSON tokens that Dick Hardt discussed within the OpenID community. Solutions for signing JSON content were previously explored by Magic Signatures [MagicSignatures], JSON Simple Sign [JSS], and Canvas Applications [CanvasApp], all of which influenced this draft. Dirk Balfanz, Yaron Y. Goland, John Panzer, and Paul Tarjan all made significant contributions to the design of this specification. Hannes Tschofenig and Derek Atkins chaired the OAuth working group and Sean Turner and Stephen Farrell served as Security area directors during the creation of this specification. Appendix E. Open Issues [[ to be removed by the RFC editor before publication as an RFC ]] The following items remain to be considered or done in this draft: o Track changes to the underlying JOSE specifications. Appendix F. Document History [[ to be removed by the RFC editor before publication as an RFC ]] -04 o Promoted Initialization Vector from being a header parameter to being a top-level JWE element. This saves approximately 16 bytes in the compact serialization, which is a significant savings for some use cases. Promoting the Initialization Vector out of the header also avoids repeating this shared value in the JSON serialization. o Applied changes made by the RFC Editor to RFC 6749's registry language to this specification. o Reference RFC 6755 -- An IETF URN Sub-Namespace for OAuth. -03 o Added statement that "StringOrURI values are compared as case- sensitive strings with no transformations or canonicalizations applied". Jones, et al. Expires April 18, 2013 [Page 22] Internet-Draft JSON Web Token (JWT) October 2012 o Indented artwork elements to better distinguish them from the body text. -02 o Added an example of an encrypted JWT. o Added this language to Registration Templates: "This name is case sensitive. Names that match other registered names in a case insensitive manner SHOULD NOT be accepted." o Applied editorial suggestions. -01 o Added the "cty" (content type) header parameter for declaring type information about the secured content, as opposed to the "typ" (type) header parameter, which declares type information about this object. This significantly simplified nested JWTs. o Moved description of how to determine whether a header is for a JWS or a JWE from the JWT spec to the JWE spec. o Changed registration requirements from RFC Required to Specification Required with Expert Review. o Added Registration Template sections for defined registries. o Added Registry Contents sections to populate registry values. o Added "Collision Resistant Namespace" to the terminology section. o Numerous editorial improvements. -00 o Created the initial IETF draft based upon draft-jones-json-web-token-10 with no normative changes. Authors' Addresses Michael B. Jones Microsoft Email: mbj@microsoft.com URI: http://self-issued.info/ Jones, et al. Expires April 18, 2013 [Page 23] Internet-Draft JSON Web Token (JWT) October 2012 John Bradley Ping Identity Email: ve7jtb@ve7jtb.com Nat Sakimura Nomura Research Institute Email: n-sakimura@nri.co.jp Jones, et al. Expires April 18, 2013 [Page 24]