| OAuth Working Group | B. Campbell |
| Internet-Draft | Ping Identity |
| Intended status: Standards Track | J. Bradley |
| Expires: February 24, 2020 | Yubico |
| N. Sakimura | |
| Nomura Research Institute | |
| T. Lodderstedt | |
| YES.com AG | |
| August 23, 2019 |
OAuth 2.0 Mutual-TLS Client Authentication and Certificate-Bound Access Tokens
draft-ietf-oauth-mtls-17
This document describes OAuth client authentication and certificate-bound access and refresh tokens using mutual Transport Layer Security (TLS) authentication with X.509 certificates. OAuth clients are provided a mechanism for authentication to the authorization server using mutual TLS, based on either self-signed certificates or public key infrastructure (PKI). OAuth authorization servers are provided a mechanism for binding access tokens to a client's mutual-TLS certificate, and OAuth protected resources are provided a method for ensuring that such an access token presented to it was issued to the client presenting the token.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on February 24, 2020.
Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
The OAuth 2.0 Authorization Framework [RFC6749] enables third-party client applications to obtain delegated access to protected resources. In the prototypical abstract OAuth flow, illustrated in Figure 1, the client obtains an access token from an entity known as an authorization server and then uses that token when accessing protected resources, such as HTTPS APIs.
+--------+ +---------------+ | | | | | |<--(A)-- Get an access token --->| Authorization | | | | Server | | | | | | | +---------------+ | | ^ | | | | | | | (C) | | Client | Validate the | | access token | | | | | | | | v | | +---------------+ | | | (C) | | | | | | |<--(B)-- Use the access token -->| Protected | | | | Resource | | | | | +--------+ +---------------+
Figure 1: Abstract OAuth 2.0 Protocol Flow
The flow illustrated in Figure 1 includes the following steps:
Layering on the abstract flow above, this document standardizes enhanced security options for OAuth 2.0 utilizing client-certificate-based mutual TLS. Section 2 provides options for authenticating the request in step (A). Step (C) is supported with semantics to express the binding of the token to the client certificate for both local and remote processing in Section 3.1 and Section 3.2 respectively. This ensures that, as described in Section 3, protected resource access in step (B) is only possible by the legitimate client using a certificate-bound token and holding the private key corresponding to the certificate.
OAuth 2.0 defines a shared-secret method of client authentication but also allows for definition and use of additional client authentication mechanisms when interacting directly with the authorization server. This document describes an additional mechanism of client authentication utilizing mutual-TLS certificate-based authentication, which provides better security characteristics than shared secrets. While [RFC6749] documents client authentication for requests to the token endpoint, extensions to OAuth 2.0 (such as Introspection, Revocation, and the Backchannel Authentication Endpoint in [OpenID.CIBA]) define endpoints that also utilize client authentication and the mutual TLS methods defined herein are applicable to those endpoints as well.
Mutual-TLS certificate-bound access tokens ensure that only the party in possession of the private key corresponding to the certificate can utilize the token to access the associated resources. Such a constraint is sometimes referred to as key confirmation, proof-of-possession, or holder-of-key and is unlike the case of the bearer token described in [RFC6750], where any party in possession of the access token can use it to access the associated resources. Binding an access token to the client's certificate prevents the use of stolen access tokens or replay of access tokens by unauthorized parties.
Mutual-TLS certificate-bound access tokens and mutual-TLS client authentication are distinct mechanisms, which are complementary but don't necessarily need to be deployed or used together.
Additional client metadata parameters are introduced by this document in support of certificate-bound access tokens and mutual-TLS client authentication. The authorization server can obtain client metadata via the Dynamic Client Registration Protocol, which defines mechanisms for dynamically registering OAuth 2.0 client metadata with authorization servers. Also the metadata defined by RFC7591, and registered extensions to it, imply a general data model for clients that is useful for authorization server implementations even when the Dynamic Client Registration Protocol isn't in play. Such implementations will typically have some sort of user interface available for managing client configuration.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
Throughout this document the term "mutual TLS" refers to the process whereby, in addition to the normal TLS server authentication with a certificate, a client presents its X.509 certificate and proves possession of the corresponding private key to a server when negotiating a TLS session. In contemporary versions of TLS [RFC8446] [RFC5246] this requires that the client send the Certificate and CertificateVerify messages during the handshake and for the server to verify the CertificateVerify and Finished messages.
This section defines, as an extension of OAuth 2.0, Section 2.3, two distinct methods of using mutual-TLS X.509 client certificates as client credentials. The requirement of mutual TLS for client authentication is determined by the authorization server based on policy or configuration for the given client (regardless of whether the client was dynamically registered, statically configured, or otherwise established).
In order to utilize TLS for OAuth client authentication, the TLS connection between the client and the authorization server MUST have been established or reestablished with mutual-TLS X.509 certificate authentication (i.e. the Client Certificate and Certificate Verify messages are sent during the TLS Handshake).
For all requests to the authorization server utilizing mutual-TLS client authentication, the client MUST include the client_id parameter, described in OAuth 2.0, Section 2.2. The presence of the client_id parameter enables the authorization server to easily identify the client independently from the content of the certificate. The authorization server can locate the client configuration using the client identifier and check the certificate presented in the TLS Handshake against the expected credentials for that client. The authorization server MUST enforce the binding between client and certificate as described in either Section 2.1 or Section 2.2 below. If no certificate is presented or that which is presented doesn't match that which is expected for the given client_id, the authorization server returns a normal OAuth 2.0 error response per Section 5.2 of RFC6749 with the invalid_client error code to indicate failed client authentication.
The PKI (public key infrastructure) method of mutual-TLS OAuth client authentication adheres to the way in which X.509 certificates are traditionally used for authentication. It relies on a validated certificate chain [RFC5280] and a single subject distinguished name (DN) or a single subject alternative name (SAN) to authenticate the client. Only one subject name value of any type is used for each client. The TLS handshake is utilized to validate the client's possession of the private key corresponding to the public key in the certificate and to validate the corresponding certificate chain. The client is successfully authenticated if the subject information in the certificate matches the single expected subject configured or registered for that particular client (note that a predictable treatment of DN values, such as the distinguishedNameMatch rule from [RFC4517], is needed in comparing the certificate's subject DN to the client's registered DN). Revocation checking is possible with the PKI method but if and how to check a certificate's revocation status is a deployment decision at the discretion of the authorization server. Clients can rotate their X.509 certificates without the need to modify the respective authentication data at the authorization server by obtaining a new certificate with the same subject from a trusted certificate authority (CA).
For the PKI method of mutual-TLS client authentication, this specification defines and registers the following authentication method metadata value into the "OAuth Token Endpoint Authentication Methods" registry [IANA.OAuth.Parameters].
In order to convey the expected subject of the certificate, the following metadata parameters are introduced for the OAuth 2.0 Dynamic Client Registration Protocol in support of the PKI method of mutual-TLS client authentication. A client using the tls_client_auth authentication method MUST use exactly one of the below metadata parameters to indicate the certificate subject value that the authorization server is to expect when authenticating the respective client.
This method of mutual-TLS OAuth client authentication is intended to support client authentication using self-signed certificates. As a prerequisite, the client registers its X.509 certificates (using jwks defined in [RFC7591]) or a reference to a trusted source for its X.509 certificates (using jwks_uri from [RFC7591]) with the authorization server. During authentication, TLS is utilized to validate the client's possession of the private key corresponding to the public key presented within the certificate in the respective TLS handshake. In contrast to the PKI method, the client's certificate chain is not validated by the server in this case. The client is successfully authenticated if the certificate that it presented during the handshake matches one of the certificates configured or registered for that particular client. The Self-Signed Certificate method allows the use of mutual TLS to authenticate clients without the need to maintain a PKI. When used in conjunction with a jwks_uri for the client, it also allows the client to rotate its X.509 certificates without the need to change its respective authentication data directly with the authorization server.
For the Self-Signed Certificate method of mutual-TLS client authentication, this specification defines and registers the following authentication method metadata value into the "OAuth Token Endpoint Authentication Methods" registry [IANA.OAuth.Parameters].
For the Self-Signed Certificate method of binding a certificate with a client using mutual TLS client authentication, the existing jwks_uri or jwks metadata parameters from [RFC7591] are used to convey the client's certificates via JSON Web Key (JWK) in a JWK Set (JWKS) [RFC7517]. The jwks metadata parameter is a JWK Set containing the client's public keys as an array of JWKs while the jwks_uri parameter is a URL that references a client's JWK Set. A certificate is represented with the x5c parameter of an individual JWK within the set. Note that the members of the JWK representing the public key (e.g. "n" and "e" for RSA, "x" and "y" for EC) are required parameters per [RFC7518] so will be present even though they are not utilized in this context. Also note that that Section 4.7 of [RFC7517] requires that the key in the first certificate of the x5c parameter match the public key represented by those other members of the JWK.
When mutual TLS is used by the client on the connection to the token endpoint, the authorization server is able to bind the issued access token to the client certificate. Such a binding is accomplished by associating the certificate with the token in a way that can be accessed by the protected resource, such as embedding the certificate hash in the issued access token directly, using the syntax described in Section 3.1, or through token introspection as described in Section 3.2. Binding the access token to the client certificate in that fashion has the benefit of decoupling that binding from the client's authentication with the authorization server, which enables mutual TLS during protected resource access to serve purely as a proof-of-possession mechanism. Other methods of associating a certificate with an access token are possible, per agreement by the authorization server and the protected resource, but are beyond the scope of this specification.
In order for a resource server to use certificate-bound access tokens, it must have advance knowledge that mutual TLS is to be used for some or all resource accesses. In particular, the access token itself cannot be used as input to the decision of whether or not to request mutual TLS, since from the TLS perspective those are "Application Data", only exchanged after the TLS handshake has been completed, and the initial CertificateRequest occurs during the handshake, before the Application Data is available. Although subsequent opportunities for a TLS client to present a certificate may be available, e.g., via TLS 1.2 renegotiation [RFC5246] or TLS 1.3 post-handshake authentication [RFC8446], this document makes no provision for their usage. It is expected to be common that a mutual-TLS-using resource server will require mutual TLS for all resources hosted thereupon, or will serve mutual-TLS-protected and regular resources on separate hostname+port combinations, though other workflows are possible. How resource server policy is synchronized with the AS is out of scope for this document.
Within the scope of an mutual-TLS-protected resource-access flow, the client makes protected resource requests as described in [RFC6750], however, those requests MUST be made over a mutually authenticated TLS connection using the same certificate that was used for mutual TLS at the token endpoint.
The protected resource MUST obtain, from its TLS implementation layer, the client certificate used for mutual TLS and MUST verify that the certificate matches the certificate associated with the access token. If they do not match, the resource access attempt MUST be rejected with an error per [RFC6750] using an HTTP 401 status code and the invalid_token error code.
Metadata to convey server and client capabilities for mutual-TLS client certificate-bound access tokens is defined in Section 3.3 and Section 3.4 respectively.
When access tokens are represented as JSON Web Tokens (JWT)[RFC7519], the certificate hash information SHOULD be represented using the x5t#S256 confirmation method member defined herein.
To represent the hash of a certificate in a JWT, this specification defines the new JWT Confirmation Method member x5t#S256 for the X.509 Certificate SHA-256 Thumbprint. The value of the x5t#S256 member is a base64url-encoded [RFC4648] SHA-256 [SHS] hash (a.k.a. thumbprint, fingerprint or digest) of the DER encoding [X690] of the X.509 certificate [RFC5280]. The base64url-encoded value MUST omit all trailing pad '=' characters and MUST NOT include any line breaks, whitespace, or other additional characters.
The following is an example of a JWT payload containing an x5t#S256 certificate thumbprint confirmation method. The new JWT content introduced by this specification is the cnf confirmation method claim at the bottom of the example that has the x5t#S256 confirmation method member containing the value that is the hash of the client certificate to which the access token is bound.
{
"iss": "https://server.example.com",
"sub": "ty.webb@example.com",
"exp": 1493726400,
"nbf": 1493722800,
"cnf":{
"x5t#S256": "bwcK0esc3ACC3DB2Y5_lESsXE8o9ltc05O89jdN-dg2"
}
}
Figure 2: Example JWT Claims Set with an X.509 Certificate Thumbprint Confirmation Method
OAuth 2.0 Token Introspection defines a method for a protected resource to query an authorization server about the active state of an access token as well as to determine meta-information about the token.
For a mutual-TLS client certificate-bound access token, the hash of the certificate to which the token is bound is conveyed to the protected resource as meta-information in a token introspection response. The hash is conveyed using the same cnf with x5t#S256 member structure as the certificate SHA-256 thumbprint confirmation method, described in Section 3.1, as a top-level member of the introspection response JSON. The protected resource compares that certificate hash to a hash of the client certificate used for mutual-TLS authentication and rejects the request, if they do not match.
The following is an example of an introspection response for an active token with an x5t#S256 certificate thumbprint confirmation method. The new introspection response content introduced by this specification is the cnf confirmation method at the bottom of the example that has the x5t#S256 confirmation method member containing the value that is the hash of the client certificate to which the access token is bound.
HTTP/1.1 200 OK
Content-Type: application/json
{
"active": true,
"iss": "https://server.example.com",
"sub": "ty.webb@example.com",
"exp": 1493726400,
"nbf": 1493722800,
"cnf":{
"x5t#S256": "bwcK0esc3ACC3DB2Y5_lESsXE8o9ltc05O89jdN-dg2"
}
}
Figure 3: Example Introspection Response for a Certificate-Bound Access Token
This document introduces the following new authorization server metadata [RFC8414] parameter to signal the server's capability to issue certificate bound access tokens:
The following new client metadata parameter is introduced to convey the client's intention to use certificate bound access tokens:
Note that, if a client that has indicated the intention to use mutual-TLS client certificate-bound tokens makes a request to the token endpoint over a non-mutual-TLS connection, it is at the authorization server's discretion as to whether to return an error or issue an unbound token.
Mutual-TLS OAuth client authentication and certificate-bound access tokens can be used independently of each other. Use of certificate-bound access tokens without mutual-TLS OAuth client authentication, for example, is possible in support of binding access tokens to a TLS client certificate for public clients (those without authentication credentials associated with the client_id). The authorization server would configure the TLS stack in the same manner as for the Self-Signed Certificate method such that it does not verify that the certificate presented by the client during the handshake is signed by a trusted CA. Individual instances of a client would create a self-signed certificate for mutual TLS with both the authorization server and resource server. The authorization server would not use the mutual-TLS certificate to authenticate the client at the OAuth layer but would bind the issued access token to that certificate, for which the client has proven possession of the corresponding private key. The access token is then bound to the certificate and can only be used by the client possessing the certificate and corresponding private key and utilizing them to negotiate mutual TLS on connections to the resource server. When the authorization server issues a refresh token to such a client, it SHOULD also bind the refresh token to the respective certificate. And check the binding when the refresh token is presented to get new access tokens. The implementation details of the binding the refresh token are at the discretion of the authorization server.
The process of negotiating client certificate-based mutual TLS involves a TLS server requesting a certificate from the TLS client (the client does not provide one unsolicited). Although a server can be configured such that client certificates are optional, meaning that the connection is allowed to continue when the client does not provide a certificate, the act of a server requesting a certificate can result in undesirable behavior from some clients. This is particularly true of web browsers as TLS clients, which will typically present the end-user with an intrusive certificate selection interface when the server requests a certificate.
Authorization servers supporting both clients using mutual TLS and conventional clients MAY chose to isolate the server side mutual-TLS behavior to only clients intending to do mutual TLS, thus avoiding any undesirable effects it might have on conventional clients. The following authorization server metadata parameter is introduced to facilitate such separation:
{
"issuer": "https://server.example.com",
"authorization_endpoint": "https://server.example.com/authz",
"token_endpoint": "https://server.example.com/token",
"introspection_endpoint": "https://server.example.com/introspect",
"revocation_endpoint": "https://server.example.com/revo",
"jwks_uri": "https://server.example.com/jwks",
"response_types_supported": ["code"],
"response_modes_supported": ["fragment","query","form_post"],
"grant_types_supported": ["authorization_code", "refresh_token"],
"token_endpoint_auth_methods_supported":
["tls_client_auth","client_secret_basic","none"],
"tls_client_certificate_bound_access_tokens": true
"mtls_endpoint_aliases": {
"token_endpoint": "https://mtls.example.com/token",
"revocation_endpoint": "https://mtls.example.com/revo",
"introspection_endpoint": "https://mtls.example.com/introspect"
}
}
Figure 4: Example Authorization Server Metadata with Mutual-TLS Endpoint Aliases
Below is an example of an authorization server metadata document with the mtls_endpoint_aliases parameter, which indicates aliases for the token, revocation, and introspection endpoints that an OAuth client intending to do mutual TLS would in preference to the conventional token, revocation, and introspection endpoints. Note that the endpoints in mtls_endpoint_aliases use a different host than their conventional counterparts, which allows the authorization server (via TLS server_name extension [RFC6066] or actual distinct hosts) to differentiate its TLS behavior as appropriate.
The authorization server needs to set up its TLS configuration appropriately for the OAuth client authentication methods it supports.
An authorization server that supports mutual-TLS client authentication and other client authentication methods or public clients in parallel would make mutual TLS optional (i.e. allowing a handshake to continue after the server requests a client certificate but the client does not send one).
In order to support the Self-Signed Certificate method alone, the authorization server would configure the TLS stack in such a way that it does not verify whether the certificate presented by the client during the handshake is signed by a trusted CA certificate.
As described in Section 3, the authorization server binds the issued access token to the TLS client certificate, which means that it will only issue certificate-bound tokens for a certificate which the client has proven possession of the corresponding private key.
The authorization server may also consider hosting the token endpoint, and other endpoints requiring client authentication, on a separate host name or port in order to prevent unintended impact on the TLS behavior of its other endpoints, e.g. the authorization endpoint. As described in Section 5, it may further isolate any potential impact of the server requesting client certificates by offering a distinct set of endpoints on a separate host or port, which are aliases for the originals that a client intending to do mutual TLS will use in preference to the conventional endpoints.
OAuth divides the roles and responsibilities such that the resource server relies on the authorization server to perform client authentication and obtain resource owner (end-user) authorization. The resource server makes authorization decisions based on the access token presented by the client but does not directly authenticate the client per se. The manner in which an access token is bound to the client certificate and how a protected resource verifies the proof-of-possession decouples that from the specific method that the client used to authenticate with the authorization server. Mutual TLS during protected resource access can therefore serve purely as a proof-of-possession mechanism. As such, it is not necessary for the resource server to validate the trust chain of the client's certificate in any of the methods defined in this document. The resource server would therefore configure the TLS stack in a way that it does not verify whether the certificate presented by the client during the handshake is signed by a trusted CA certificate.
As described in Section 3, an access token is bound to a specific client certificate, which means that the same certificate must be used for mutual TLS on protected resource access. It also implies that access tokens are invalidated when a client updates the certificate, which can be handled similar to expired access tokens where the client requests a new access token (typically with a refresh token) and retries the protected resource request.
This document describes binding an access token to the client certificate presented on the TLS connection from the client to the authorization server's token endpoint, however, such binding of access tokens issued directly from the authorization endpoint via the implicit grant flow is explicitly out of scope. End users interact directly with the authorization endpoint using a web browser and the use of client certificates in user's browsers bring operational and usability issues, which make it undesirable to support certificate-bound access tokens issued in the implicit grant flow. Implementations wanting to employ certificate-bound access tokens should utilize grant types that involve the client making an access token request directly to the token endpoint (e.g. the authorization code and refresh token grant types).
An authorization server or resource server MAY choose to terminate TLS connections at a load balancer, reverse proxy, or other network intermediary. How the client certificate metadata is securely communicated between the intermediary and the application server in this case is out of scope of this specification.
The OAuth 2.0 Authorization Framework [RFC6749] requires that an authorization server bind refresh tokens to the client to which they were issued and that confidential clients (those having established authentication credentials with the authorization server) authenticate to the AS when presenting a refresh token. As a result, refresh tokens are indirectly certificate-bound by way of the client ID and the associated requirement for (certificate-based) authentication to the authorization server when issued to clients utilizing the tls_client_auth or self_signed_tls_client_auth methods of client authentication. Section 4 describes certificate-bound refresh tokens issued to public clients (those without authentication credentials associated with the client_id).
The binding between the certificate and access token specified in Section 3.1 uses a cryptographic hash of the certificate. It relies on the hash function having sufficient second-preimage resistance so as to make it computationally infeasible to find or create another certificate that produces to the same hash output value. The SHA-256 hash function was used because it meets the aforementioned requirement while being widely available. If, in the future, certificate thumbprints need to be computed using hash function(s) other than SHA-256, it is suggested that additional related JWT confirmation methods members be defined for that purpose and registered in the IANA "JWT Confirmation Methods" registry [IANA.JWT.Claims] for JWT cnf member values.
Community knowledge about the strength of various algorithms and feasible attacks can change suddenly, and experience shows that a document about security is a point-in-time statement. Readers are advised to seek out any errata or updates that apply to this document.
In the abstract this document is applicable with any TLS version supporting certificate-based client authentication. Both TLS 1.3 and TLS 1.2 are cited herein because, at the time of writing, 1.3 is the newest version while 1.2 is the most widely deployed. General implementation and security considerations for TLS, including version recommendations, can be found in [BCP195].
TLS certificate validation (for both client and server certificates) requires a local database of trusted certificate authorities (CAs). Decisions about what CAs to trust and how to make such a determination of trust are out of scope for this document.
If the PKI method of client authentication is used, an attacker could try to impersonate a client using a certificate with the same subject (DN or SAN) but issued by a different CA, which the authorization server trusts. To cope with that threat, the authorization server SHOULD only accept as trust anchors a limited number of CAs whose certificate issuance policy meets its security requirements. There is an assumption then that the client and server agree out of band on the set of trust anchors that the server uses to create and validate the certificate chain. Without this assumption the use of a subject to identify the client certificate would open the server up to certificate spoofing attacks.
Parsing and validation of X.509 certificates and certificate chains is complex and implementation mistakes have previously exposed security vulnerabilities. Complexities of validation include (but are not limited to) [CX5P] [DCW] [RFC5280]:
For these reasons, implementors SHOULD use an established and well-tested X.509 library (such as one used by an established TLS library) for validation of X.509 certificate chains and SHOULD NOT attempt to write their own X.509 certificate validation procedures.
In TLS versions prior to 1.3, the client's certificate is sent unencrypted in the initial handshake and can potentially be used by third parties to monitor, track, and correlate client activity. This is likely of little concern for clients that act on behalf of a significant number of end-users because individual user activity will not be discernible amidst the client activity as a whole. However, clients that act on behalf of a single end-user, such as a native application on a mobile device, should use TLS version 1.3 whenever possible or consider the potential privacy implications of using mutual TLS on earlier versions.
This specification requests registration of the following value in the IANA "JWT Confirmation Methods" registry [IANA.JWT.Claims] for JWT cnf member values established by [RFC7800].
This specification requests registration of the following values in the IANA "OAuth Authorization Server Metadata" registry [IANA.OAuth.Parameters] established by [RFC8414].
This specification requests registration of the following values in the IANA "OAuth Token Endpoint Authentication Methods" registry [IANA.OAuth.Parameters] established by [RFC7591].
Proof-of-Possession Key Semantics for JSON Web Tokens defined the cnf (confirmation) claim, which enables confirmation key information to be carried in a JWT. However, the same proof-of-possession semantics are also useful for introspected access tokens whereby the protected resource obtains the confirmation key data as meta-information of a token introspection response and uses that information in verifying proof-of-possession. Therefore this specification defines and registers proof-of-possession semantics for OAuth 2.0 Token Introspection using the cnf structure. When included as a top-level member of an OAuth token introspection response, cnf has the same semantics and format as the claim of the same name defined in [RFC7800]. While this specification only explicitly uses the x5t#S256 confirmation method member (see Section 3.2), it needs to define and register the higher level cnf structure as an introspection response member in order to define and use the more specific certificate thumbprint confirmation method.
As such, this specification requests registration of the following value in the IANA "OAuth Token Introspection Response" registry [IANA.OAuth.Parameters] established by [RFC7662].
This specification requests registration of the following client metadata definitions in the IANA "OAuth Dynamic Client Registration Metadata" registry [IANA.OAuth.Parameters] established by [RFC7591]:
"cnf":{"x5t#S256":"A4DtL2JmUMhAsvJj5tKyn64SqzmuXbMrJa0n761y5v0"}
Figure 5: x5t#S256 Confirmation Claim
-----BEGIN CERTIFICATE----- MIIBBjCBrAIBAjAKBggqhkjOPQQDAjAPMQ0wCwYDVQQDDARtdGxzMB4XDTE4MTAx ODEyMzcwOVoXDTIyMDUwMjEyMzcwOVowDzENMAsGA1UEAwwEbXRsczBZMBMGByqG SM49AgEGCCqGSM49AwEHA0IABNcnyxwqV6hY8QnhxxzFQ03C7HKW9OylMbnQZjjJ /Au08/coZwxS7LfA4vOLS9WuneIXhbGGWvsDSb0tH6IxLm8wCgYIKoZIzj0EAwID SQAwRgIhAP0RC1E+vwJD/D1AGHGzuri+hlV/PpQEKTWUVeORWz83AiEA5x2eXZOV bUlJSGQgjwD5vaUaKlLR50Q2DmFfQj1L+SY= -----END CERTIFICATE-----
Figure 6: PEM Encoded Self-Signed Certificate
{
"kty":"EC",
"x":"1yfLHCpXqFjxCeHHHMVDTcLscpb07KUxudBmOMn8C7Q",
"y":"8_coZwxS7LfA4vOLS9WuneIXhbGGWvsDSb0tH6IxLm8",
"crv":"P-256",
"x5c":[
"MIIBBjCBrAIBAjAKBggqhkjOPQQDAjAPMQ0wCwYDVQQDDARtdGxzMB4XDTE4MTA
xODEyMzcwOVoXDTIyMDUwMjEyMzcwOVowDzENMAsGA1UEAwwEbXRsczBZMBMGBy
qGSM49AgEGCCqGSM49AwEHA0IABNcnyxwqV6hY8QnhxxzFQ03C7HKW9OylMbnQZ
jjJ/Au08/coZwxS7LfA4vOLS9WuneIXhbGGWvsDSb0tH6IxLm8wCgYIKoZIzj0E
AwIDSQAwRgIhAP0RC1E+vwJD/D1AGHGzuri+hlV/PpQEKTWUVeORWz83AiEA5x2
eXZOVbUlJSGQgjwD5vaUaKlLR50Q2DmFfQj1L+SY="
]
}
Figure 7: JSON Web Key
For reference, an x5t#S256 value and the X.509 Certificate from which it was calculated are provided in the following examples, Figure 5 and Figure 6 respectively. A JWK representation of the certificate's public key along with the x5c member is also provided in Figure 7.
OAuth 2.0 Token Binding enables the application of Token Binding to the various artifacts and tokens employed throughout OAuth. That includes binding of an access token to a Token Binding key, which bears some similarities in motivation and design to the mutual-TLS client certificate-bound access tokens defined in this document. Both documents define what is often called a proof-of-possession security mechanism for access tokens, whereby a client must demonstrate possession of cryptographic keying material when accessing a protected resource. The details differ somewhat between the two documents but both have the authorization server bind the access token that it issues to an asymmetric key pair held by the client. The client then proves possession of the private key from that pair with respect to the TLS connection over which the protected resource is accessed.
Token Binding uses bare keys that are generated on the client, which avoids many of the difficulties of creating, distributing, and managing certificates used in this specification. However, at the time of writing, Token Binding is fairly new and there is relatively little support for it in available application development platforms and tooling. Until better support for the underlying core Token Binding specifications exists, practical implementations of OAuth 2.0 Token Binding are infeasible. Mutual TLS, on the other hand, has been around for some time and enjoys widespread support in web servers and development platforms. As a consequence, OAuth 2.0 Mutual-TLS Client Authentication and Certificate-Bound Access Tokens can be built and deployed now using existing platforms and tools. In the future, the two specifications are likely to be deployed in parallel for solving similar problems in different environments. Authorization servers may even support both specifications simultaneously using different proof-of-possession mechanisms for tokens issued to different clients.
Scott "not Tomlinson" Tomilson and Matt Peterson were involved in design and development work on a mutual-TLS OAuth client authentication implementation, which predates this document. Experience and learning from that work informed some of the content of this document.
This specification was developed within the OAuth Working Group under the chairmanship of Hannes Tschofenig and Rifaat Shekh-Yusef with Eric Rescorla, Benjamin Kaduk, and Roman Danyliw serving as Security Area Directors. Additionally, the following individuals contributed ideas, feedback, and wording that helped shape this specification: Vittorio Bertocci, Sergey Beryozkin, Ralph Bragg, Sophie Bremer, Roman Danyliw, Vladimir Dzhuvinov, Samuel Erdtman, Evan Gilman, Leif Johansson, Michael Jones, Phil Hunt, Benjamin Kaduk, Takahiko Kawasaki, Sean Leonard, Kepeng Li, Neil Madden, James Manger, Jim Manico, Nov Matake, Sascha Preibisch, Eric Rescorla, Justin Richer, Vincent Roca, Filip Skokan, Dave Tonge, and Hannes Tschofenig.
[[ to be removed by the RFC Editor before publication as an RFC ]]
draft-ietf-oauth-mtls-17
draft-ietf-oauth-mtls-16
draft-ietf-oauth-mtls-15
draft-ietf-oauth-mtls-14
draft-ietf-oauth-mtls-13
draft-ietf-oauth-mtls-12
draft-ietf-oauth-mtls-11
draft-ietf-oauth-mtls-10
draft-ietf-oauth-mtls-09
draft-ietf-oauth-mtls-08
draft-ietf-oauth-mtls-07
draft-ietf-oauth-mtls-06
draft-ietf-oauth-mtls-05
draft-ietf-oauth-mtls-04
draft-ietf-oauth-mtls-03
draft-ietf-oauth-mtls-02
draft-ietf-oauth-mtls-01
draft-ietf-oauth-mtls-00
draft-campbell-oauth-mtls-01
draft-campbell-oauth-mtls-00
draft-campbell-oauth-tls-client-auth-00