| OPS Area Working Group | Q. Wu |
| Internet-Draft | W. Liu |
| Intended status: Informational | Huawei Technologies |
| Expires: December 31, 2017 | A. Farrel |
| Juniper Networks | |
| June 29, 2017 |
Service Models Explained
draft-ietf-opsawg-service-model-explained-01
The IETF has produced a considerable number of data modules in the YANG modelling language. The majority of these modules are used to construct data models to model devices or monolithic functions and they allow access for configuration and to read operational status.
A small number of YANG modules have been defined to model services (for example, the Layer Three Virtual Private Network Service Model produced by the L3SM working group and documented in RFC 8049).
This document briefly sets out the scope of and purpose of an IETF service model, and it also shows where a service model might fit into a Software Defined Networking architecture. Note that service models do not make any assumption of how a service is actually engineered and delivered for a customer; details of how network protocols and devices are engineered to deliver a service are captured in other models that are not exposed through the Customer-Provider Interface.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on December 31, 2017.
Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
In recent years the number of data modules written in the YANG modelling language [RFC6020] for configuration and monitoring has blossomed. Many of these are used for device-level configuration (for example, [RFC7223]) or for control of monolithic functions or protocol instances (for example, [RFC7407]).
Within the context of Software Defined Networking (SDN) [RFC7426] YANG data models may be used on Southbound Interfaces (SBIs) between a controller and network devices, and between network orchestrators and controllers. There may also be a hierarchy of such components with super-controllers, domain controllers, and device controllers all exchanging information and instructions using YANG models.
Recently there has been interest in using YANG to define and document data models that describe services in a portable way that is independent of which network operator uses the model. For example, the Layer Three Virtual Private Network Service Model (L3SM) [RFC8049]. Such models may be used in manual and even paper-driven service request processes with a gradual transition to IT-based mechanisms. Ultimately they could be used in online, software-driven dynamic systems.
This document explains the scope and purpose of service models within the IETF and describes how a service model can be used by a network operator. Equally, this document clarifies what a service model is not, and dispels some common misconceptions.
The document also shows where a service model might fit into an SDN architecture, but it is important to note that a service model does not require or preclude the use of SDN. Note that service models do not make any assumption of how a service is actually engineered and delivered to a customer; details of how network protocols and devices are engineered to deliver a service are captured in other models that are not exposed through the Customer- Provider Interface.
Other work on classifying YANG data models has been done in [I-D.ietf-netmod-yang-model-classification]. That document provides an important reference for this document, and also uses the term "service model". Section 6.1 provides a comparison between these two uses of the same terminology.
Readers should familiarize themselves with the description and classification of YANG models provided in [I-D.ietf-netmod-yang-model-classification].
The following terms are used in this document:
The distinction between a customer service model and a service delivery model needs to be repeatedly clarified. A customer service model is not a data model used to directly configure network devices, protocols, or functions: it is not something that is sent to network devices (i.e., routers or switches) for processing. Equally, a customer service model is not a data model that describes how a network operator realizes and delivers the service described by the model. This distinction is discussed further in later sections.
As already indicated, customer service models are used on the interface between customers and network operators. This is shown simply in Figure 1
The language in which a customer service model is described is a choice for whoever specifies the model. The IETF uses the YANG data modeling language defined in [RFC6020]
The encoding and communication protocol used to exchange a customer service model between customer and network operator are deployment- and implementation-specific. The IETF has standardized the NETCONF protocol [RFC6241] and the RESTCONF protocol [RFC8040] for interactions "on the wire" between software components with data encoded in XML or JSON. However, co-located software components might use an API, while systems with more direct human interactions might use web pages or even paper forms.
-------------- Customer ----------------------
| | Service Model | |
| Customer | <-----------------> | Network Operator |
| | | |
-------------- ----------------------
Figure 1: The Customer Service Models used on the Interface between Customers and Network Operators
How a network operator processes a customer's service request described with a customer service model depends on the commercial and operational tools, processes, and policies used by the network operator. These may vary considerably from one network operator to another.
However, the intent is that the network operator maps the service request into configuration and operational parameters that control one or more networks to deliver the requested services. That means that the network operator (or software run by the network operator) takes the information in the customer service model and determines how to deliver the service by enabling and configuring network protocols and devices. They may achieve this by constructing service delivery models and passing them to network orchestrators or controllers. The use of standard customer service models eases service delivery by means of automation.
The practicality of customer service models has been repeatedly debated. It has been suggested that network operators have such radically different business modes and such diverse commercial offerings that a common customer service model is impractical. However, the L3SM [RFC8049] results from the consensus of multiple individuals working at network operators and offers a common core of service options that can be augmented according to the needs of individual network operators.
It has also been suggested that there should be a single, base customer service module, and that details of individual services should be offered as extensions or augmentations of this. It is quite possible that a number of service parameters (such as the identity and postal address of a customer) will be common and it would be a mistake to define them multiple times, once in each customer service model. However, the distinction between a 'module' and a 'model' should be considered at this point: modules are how the data for models is logically broken out and documented especially for re-use in multiple models.
In an SDN system, the management of network resources and protocols is performed by software systems that determine how best to utilize the network. Figure 2 shows a sample architectural view of an SDN system where network elements are programmed by a component called an "SDN controller" (or "controller" for short), and where controllers are instructed by an orchestrator that has a wider view of the whole of, or part of, a network. The internal organization of an SDN control plane is deployment-specific.
------------------
| |
| Orchestrator |
| |
.------------------.
. : .
. : .
------------ ------------ ------------
| | | | | |
| Controller | | Controller | | Controller |
| | | | | |
------------ ------------ ------------
: . . :
: . . :
: . . :
--------- --------- --------- ---------
| Network | | Network | | Network | | Network |
| Element | | Element | | Element | | Element |
--------- --------- --------- ---------
Figure 2: A Sample SDN Architecture
But a customer's service request is (or should be) technology-agnostic. That is, there should be an independence between the behavior and functions that a customer requests and the technology that the network operator has available to deliver the service. This means that the service request must be mapped to the orchestrator's view, and this mapping may include a choice of which networks and technologies to use depending on which service features have been requested.
One implementation option to achieve this mapping is to split the orchestration function between a "Service Orchestrator" and a "Network Orchestrator" as shown in Figure 3.
Customer
------------------ Service ----------
| | Model | |
| Service |<-------->| Customer |
| Orchestrator | (a) | |
| | ----------
------------------
. .
. . -----------
. (b) . ......|Application|
. . : | BSS/OSS |
. . : -----------
. Service Delivery . :
. Model . :
------------------ ------------------
| | | |
| Network | | Network |
| Orchestrator | | Orchestrator |
| | | |
.------------------ ------------------.
. : : .
. : Network Configuration : .
. : Model : .
------------ ------------ ------------ ------------
| | | | | | | |
| Controller | | Controller | | Controller | | Controller |
| | | | | | | |
------------ ------------ ------------ ------------
: . . : :
: . . Device : :
: . . Configuration : :
: . . Model : :
--------- --------- --------- --------- ---------
| Network | | Network | | Network | | Network | | Network |
| Element | | Element | | Element | | Element | | Element |
--------- --------- --------- --------- ---------
Figure 3: An Example SDN Architecture with a Service Orchestrator
Figure 3 also shows where different data models might be applied within the architecture.
The split between control components that exposes a "service interface" is present in many figures showing extended SDN architectures:
This can all lead to some confusion around the definition of a "service interface" and a "service model". Some previous literature considers the interface northbound of the Network Orchestrator (labeled "(b)" in Figure 3) to be a "service interface" used by an application, but the service described at this interface is network-centric and is aware of many features such as topology, technology, and operator policy. Thus, we make a distinction between this type of service interface and the more abstract service interface (labeled "(a)" in Figure 3) where the service is described by a service model and the interaction is between customer and network operator. Further discussion of this point is provided in Section 5.
In discussing service models, there are several possible causes of confusion:
Other work has classified YANG models, produced parallel architectures, and developed a range of YANG models. This section briefly examines that other work and shows how it fits with the description of service models introduced in this document.
As previously noted, [I-D.ietf-netmod-yang-model-classification] provides a classification of YANG data models. It introduces the term "Network Service YANG Module" to identify the type of model used to "describe the configuration, state data, operations and notifications of abstract representations of services implemented on one or multiple network elements." These are service delivery models as described in this document, that is, they are the models used on the interface between the Service Orchestrator or OSS/BSS and the Network Orchestrator as shown in Figure 3.
Figure 1 of [I-D.ietf-netmod-yang-model-classification] can be modified to make this more clear and to add an additional example of a Network Service YANG model as shown in Figure 4.
+---------------+
| |
| Customers |
| |
+---------------+
- - - - - - - - - - - - - -
Customer Service YANG Modules
+--------------------------+ +--------------------------+
| | | Operations and Business |
| Service Orchestrator | | Support Systems |
| | | (OSS/BSS) |
+--------------------------+ +--------------------------+
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Network Service YANG Modules
+------------+ +-------------+ +-------------+ +-------------+
| | | | | | | |
| - L2VPN | | - L2VPN | | EVPN | | L3VPN |
| - VPWS | | - VPLS | | | | |
| | | | | | | |
+------------+ +-------------+ +-------------+ +-------------+
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Network Element YANG Modules
+------------+ +------------+ +-------------+ +------------+
| | | | | | | |
| MPLS | | BGP | | IPv4 / IPv6 | | Ethernet |
| | | | | | | |
+------------+ +------------+ +-------------+ +------------+
L2VPN: Layer 2 Virtual Private Network
L3VPN: Layer 3 Virtual Private Network
VPWS: Virtual Private Wire Service
VPLS: Virtual Private LAN Service
Figure 4: YANG Module Layers Showing Service Models
A number of IETF working groups are developing YANG models related to services. These models focus on how the network operator configures the network through protocols and devices to deliver a service. Some of these models are classed as service delivery models while others have details that are related to specific element configuration and so are classed as network element models.
A sample set of these models is listed here:
Several initiatives within the IETF are developing customer service models. The most advanced presents the Layer Three Virtual Private Network (L3VPN) service as described by a network operator to a customer. This L3VPN service model (L3SM) is documented in [RFC8049] where its usage is described as in Figure 5 which is reproduced from that document. As can be seen, the L3SM is a customer service model as described in this document.
L3VPN-SVC |
MODEL |
|
+------------------+ +-----+
| Orchestration | < --- > | OSS |
+------------------+ +-----+
| |
+----------------+ |
| Config manager | |
+----------------+ |
| |
| Netconf/CLI ...
| |
+------------------------------------------------+
Network
Figure 5: The L3SM Service Architecture
A Layer Two VPN service model (L2SM) is defined in [I-D.ietf-l2sm-l2vpn-service-model]. That model's usage is described as in Figure 6 which is a reproduction of Figure 5 from that document. As can be seen, the L2SM is a customer service model as described in this document.
----------------------------
| Customer Service Requester |
----------------------------
|
L2VPN |
Service |
Model |
|
-----------------------
| Service Orchestration |
-----------------------
|
| Service +-------------+
| Delivery +------>| Application |
| Model | | BSS/OSS |
| V +-------------+
-----------------------
| Network Orchestration |
-----------------------
| |
+----------------+ |
| Config manager | |
+----------------+ | Device
| | Models
| |
--------------------------------------------
Network
Figure 6: The L2SM Service Architecture
The MEF Forum has developed an architecture for network management and operation. It is documented as the Lifecycle Service Orchestration (LSO) Reference Architecture and illustrated in Figure 2 of [MEF-55].
The work of the MEF Forum embraces all aspects of Lifecycle Service Orchestration including billing, SLAs, order management, and life-cycle management. The IETF's work on service models is typically smaller offering a simple, self-contained service YANG module. Thus, it may be impractical to fit IETF service models into the MEF Forum LSO architecture. This does not invalidate either approach, but only observes that they are different.
This section introduces a few further, more advanced concepts
Service models should generally be technology agnostic. That is to say, the customer should not care how the service is provided so long as the service is delivered.
However, some technologies reach the customer site and make a difference to the type of service delivered. Such features do need to be described in the service model.
Two examples are:
Policy appears as a crucial function in many places during network orchestration. A Service Orchestrator will, for example, apply the network operator's policies to determine how to provide a service for a particular customer (possibly considering commercial terms). However, the policies within a service model are limited to those over which a customer has direct influence and that are acted on by the network operator.
The policies that express desired behavior of services on occurrence of specific events are close to SLA definitions: they should only be included in the base service model where they are common to all network operators' offerings. Policies that describe who at a customer may request or modify services (that is, authorization) are close to commercial terms: they, too, should only be included in the base service model where they are common to all network operators' offerings.
Nevertheless, policy is so important that all service models should be designed to be easily extensible to allow policy components to be added and associated with services as needed.
When work in the L3SM working group was started, there was some doubt as to whether network operators would be able to agree on a common description of the services that they offer to their customers because, in a competitive environment, each markets the services in a different way with different additional features. However, the working group was able to agree on a core set of features that multiple network operators were willing to consider as "common". They also understood that should an individual network operator want to describe additional features (operator-specific features) they could do so by extending or augmenting the L3SM model.
Thus, when a basic description of a core service is agreed and documented in a service model, it is important that that model should be easily extended or augmented by each network operator so that the standardized model can be used in a common way and only the operator-specific features varied from one environment to another.
Network operators will, in general, offer many different services to their customers. Each would normally be the subject of a separate service model.
It is an implementation and deployment choice whether all service models are processed by a single Service Orchestrator that can coordinate between the different services, or whether each service model is handled by a specialized Service Orchestrator able to provide tuned behavior for a specific service.
It is expected that, over time, certain elements of the service models will be seen to repeat in each model. An example of such an element is the postal address of the customer.
It is anticipated that, while access to such information from each service model is important, the data will be described in its own module and may form part of the service model either by inclusion or by index.
The interface between customer and service provider is a commercial interface and needs to be subject to appropriate confidentiality. Additionally, knowledge of what services are provided to a customer or delivered by a network operator may supply information that can be used in a variety of security attacks.
Clearly, the ability to modify information exchanges between customer and network operator may result in bogus requests, unwarranted billing, and false expectations. Furthermore, in an automated system, modifications to service requests or the injection of bogus requests may lead to attacks on the network and delivery of customer traffic to the wrong place.
Therefore it is important that the protocol interface used to exchange service request information between customer and network operator is subject to authorization, authentication, and encryption. This document discusses modeling that information, not how it is exchanged.
This whole document discusses issues related to network management.
It is important to observe that automated service provisioning resulting from use of a customer service model may result in rapid and significant changes in traffic load within a network and that that might have an effect on other services carried in a network.
It is expected, therefore, that a Service Orchestration component has awareness of other service commitments, that the Network Orchestration component will not commit network resources to fulfill a service unless doing so is appropriate, and that a feedback loop will be provided to report on degradation of the network that will impact the service.
The operational state of a service does not form part of a customer service model. However, it is likely that a network operator may want to report some state information about various components of the service, and that could be achieved through extensions to the core service model.
This document makes no requests for IANA action
Thanks to Daniel King, Xian Zhang, and Michael Scharf for useful review and comments. Med Boucadair gave thoughtful and detailed comments on version -04 of this document. Thanks to Dean Bogdanovic and Tianran Zhou for their help coordinating with [I-D.ietf-netmod-yang-model-classification].
Many thanksto Jerry Bonner for spotting a tiny, one-word, but critical typo.
| [I-D.ietf-netmod-yang-model-classification] | Bogdanovic, D., Claise, B. and C. Moberg, "YANG Module Classification", Internet-Draft draft-ietf-netmod-yang-model-classification-08, June 2017. |
| [RFC3444] | Pras, A. and J. Schoenwaelder, "On the Difference between Information Models and Data Models", RFC 3444, DOI 10.17487/RFC3444, January 2003. |
| [RFC7426] | Haleplidis, E., Pentikousis, K., Denazis, S., Hadi Salim, J., Meyer, D. and O. Koufopavlou, "Software-Defined Networking (SDN): Layers and Architecture Terminology", RFC 7426, DOI 10.17487/RFC7426, January 2015. |
| [RFC8049] | Litkowski, S., Tomotaki, L. and K. Ogaki, "YANG Data Model for L3VPN Service Delivery", RFC 8049, DOI 10.17487/RFC8049, February 2017. |