| PCE Working Group | D. Dhody, Ed. |
| Internet-Draft | Huawei Technologies |
| Intended status: Standards Track | J. Hardwick |
| Expires: March 16, 2017 | Metaswitch |
| V. Beeram | |
| Juniper Networks | |
| J. Tantsura | |
| September 12, 2016 |
A YANG Data Model for Path Computation Element Communications Protocol (PCEP)
draft-ietf-pce-pcep-yang-00
This document defines a YANG data model for the management of Path Computation Element communications Protocol (PCEP) for communications between a Path Computation Client (PCC) and a Path Computation Element (PCE), or between two PCEs. The data model includes configuration data and state data (status information and counters for the collection of statistics).
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on March 16, 2017.
Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
The Path Computation Element (PCE) defined in [RFC4655] is an entity that is capable of computing a network path or route based on a network graph, and applying computational constraints. A Path Computation Client (PCC) may make requests to a PCE for paths to be computed.
PCEP is the communication protocol between a PCC and PCE and is defined in [RFC5440]. PCEP interactions include path computation requests and path computation replies as well as notifications of specific states related to the use of a PCE in the context of Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) Traffic Engineering (TE). [I-D.ietf-pce-stateful-pce] specifies extensions to PCEP to enable stateful control of MPLS TE LSPs.
This document defines a YANG [RFC6020] data model for the management of PCEP speakers. It is important to establish a common data model for how PCEP speakers are identified, configured, and monitored. The data model includes configuration data and state data (status information and counters for the collection of statistics).
This document contains a specification of the PCEP YANG module, "ietf-pcep" which provides the PCEP [RFC5440] data model.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
This document uses the terminology defined in [RFC4655] and [RFC5440]. In particular, it uses the following acronyms.
This document also uses the following terms defined in [RFC7420]:
Further, this document also uses the following terms defined in [I-D.ietf-pce-stateful-pce] :
[I-D.ietf-pce-pce-initiated-lsp] :
[I-D.ietf-pce-lsp-setup-type] :
[I-D.ietf-pce-segment-routing] :
A graphical representation of the complete data tree is presented in Section 5. The meaning of the symbols in these diagrams is as follows and as per [I-D.ietf-netmod-rfc6087bis]:
In this document, names of data nodes and other data model objects are often used without a prefix, as long as it is clear from the context in which YANG module each name is defined. Otherwise, names are prefixed using the standard prefix associated with the corresponding YANG module, as shown in Table 1.
| Prefix | YANG module | Reference |
|---|---|---|
| yang | ietf-yang-types | [RFC6991] |
| inet | ietf-inet-types | [RFC6991] |
This section describes some of the design objectives for the model:
module: ietf-pcep
+--rw pcep!
| +--rw entity
| +--rw addr inet:ip-address
| +--rw enabled? boolean
| +--rw role pcep-role
| +--rw description? string
| +--rw domain
| | +--rw domain* [domain-type domain]
| | +--rw domain-type domain-type
| | +--rw domain domain
| +--rw capability
| | +--rw gmpls? boolean {gmpls}?
| | +--rw bi-dir? boolean
| | +--rw diverse? boolean
| | +--rw load-balance? boolean
| | +--rw synchronize? boolean {svec}?
| | +--rw objective-function? boolean {obj-fn}?
| | +--rw add-path-constraint? boolean
| | +--rw prioritization? boolean
| | +--rw multi-request? boolean
| | +--rw gco? boolean {gco}?
| | +--rw p2mp? boolean {p2mp}?
| | +--rw stateful {stateful}?
| | | +--rw enabled? boolean
| | | +--rw active? boolean
| | | +--rw pce-initiated? boolean {pce-initiated}?
| | +--rw sr {sr}?
| | +--rw enabled? boolean
| | +--rw msd? uint8
| +--rw pce-info
| | +--rw scope
| | | +--rw intra-area-scope? boolean
| | | +--rw intra-area-pref? uint8
| | | +--rw inter-area-scope? boolean
| | | +--rw inter-area-scope-default? boolean
| | | +--rw inter-area-pref? uint8
| | | +--rw inter-as-scope? boolean
| | | +--rw inter-as-scope-default? boolean
| | | +--rw inter-as-pref? uint8
| | | +--rw inter-layer-scope? boolean
| | | +--rw inter-layer-pref? uint8
| | +--rw neigh-domains
| | | +--rw domain* [domain-type domain]
| | | +--rw domain-type domain-type
| | | +--rw domain domain
| | +--rw (auth-type-selection)?
| | +--:(auth-key-chain)
| | | +--rw key-chain? key-chain:key-chain-ref
| | +--:(auth-key)
| | | +--rw key? string
| | | +--rw crypto-algorithm
| | | +--rw (algorithm)?
| | | +--:(hmac-sha-1-12) {crypto-hmac-sha-1-12}?
| | | | +--rw hmac-sha1-12? empty
| | | +--:(aes-cmac-prf-128) {aes-cmac-prf-128}?
| | | | +--rw aes-cmac-prf-128? empty
| | | +--:(md5)
| | | | +--rw md5? empty
| | | +--:(sha-1)
| | | | +--rw sha-1? empty
| | | +--:(hmac-sha-1)
| | | | +--rw hmac-sha-1? empty
| | | +--:(hmac-sha-256)
| | | | +--rw hmac-sha-256? empty
| | | +--:(hmac-sha-384)
| | | | +--rw hmac-sha-384? empty
| | | +--:(hmac-sha-512)
| | | | +--rw hmac-sha-512? empty
| | | +--:(clear-text) {clear-text}?
| | | | +--rw clear-text? empty
| | | +--:(replay-protection-only) {replay-protection-only}?
| | | +--rw replay-protection-only? empty
| | +--:(auth-tls) {tls}?
| | +--rw tls
| +--rw connect-timer? uint32
| +--rw connect-max-retry? uint32
| +--rw init-backoff-timer? uint32
| +--rw max-backoff-timer? uint32
| +--rw open-wait-timer? uint32
| +--rw keep-wait-timer? uint32
| +--rw keep-alive-timer? uint32
| +--rw dead-timer? uint32
| +--rw allow-negotiation? boolean
| +--rw max-keep-alive-timer? uint32
| +--rw max-dead-timer? uint32
| +--rw min-keep-alive-timer? uint32
| +--rw min-dead-timer? uint32
| +--rw sync-timer? uint32 {svec}?
| +--rw request-timer? uint32
| +--rw max-sessions? uint32
| +--rw max-unknown-reqs? uint32
| +--rw max-unknown-msgs? uint32
| +--rw pcep-notification-max-rate uint32
| +--rw stateful-parameter {stateful}?
| | +--rw state-timeout? uint32
| | +--rw redelegation-timeout? uint32
| | +--rw rpt-non-pcep-lsp? boolean
| +--rw peers
| +--rw peer* [addr]
| +--rw addr inet:ip-address
| +--rw description? string
| +--rw domain
| | +--rw domain* [domain-type domain]
| | +--rw domain-type domain-type
| | +--rw domain domain
| +--rw capability
| | +--rw gmpls? boolean {gmpls}?
| | +--rw bi-dir? boolean
| | +--rw diverse? boolean
| | +--rw load-balance? boolean
| | +--rw synchronize? boolean {svec}?
| | +--rw objective-function? boolean {obj-fn}?
| | +--rw add-path-constraint? boolean
| | +--rw prioritization? boolean
| | +--rw multi-request? boolean
| | +--rw gco? boolean {gco}?
| | +--rw p2mp? boolean {p2mp}?
| | +--rw stateful {stateful}?
| | | +--rw enabled? boolean
| | | +--rw active? boolean
| | | +--rw pce-initiated? boolean {pce-initiated}?
| | +--rw sr {sr}?
| | +--rw enabled? boolean
| | +--rw msd? uint8
| +--rw scope
| | +--rw intra-area-scope? boolean
| | +--rw intra-area-pref? uint8
| | +--rw inter-area-scope? boolean
| | +--rw inter-area-scope-default? boolean
| | +--rw inter-area-pref? uint8
| | +--rw inter-as-scope? boolean
| | +--rw inter-as-scope-default? boolean
| | +--rw inter-as-pref? uint8
| | +--rw inter-layer-scope? boolean
| | +--rw inter-layer-pref? uint8
| +--rw neigh-domains
| | +--rw domain* [domain-type domain]
| | +--rw domain-type domain-type
| | +--rw domain domain
| +--rw delegation-pref? uint8 {stateful}?
| +--rw (auth-type-selection)?
| +--:(auth-key-chain)
| | +--rw key-chain? key-chain:key-chain-ref
| +--:(auth-key)
| | +--rw key? string
| | +--rw crypto-algorithm
| | +--rw (algorithm)?
| | +--:(hmac-sha-1-12) {crypto-hmac-sha-1-12}?
| | | +--rw hmac-sha1-12? empty
| | +--:(aes-cmac-prf-128) {aes-cmac-prf-128}?
| | | +--rw aes-cmac-prf-128? empty
| | +--:(md5)
| | | +--rw md5? empty
| | +--:(sha-1)
| | | +--rw sha-1? empty
| | +--:(hmac-sha-1)
| | | +--rw hmac-sha-1? empty
| | +--:(hmac-sha-256)
| | | +--rw hmac-sha-256? empty
| | +--:(hmac-sha-384)
| | | +--rw hmac-sha-384? empty
| | +--:(hmac-sha-512)
| | | +--rw hmac-sha-512? empty
| | +--:(clear-text) {clear-text}?
| | | +--rw clear-text? empty
| | +--:(replay-protection-only) {replay-protection-only}?
| | +--rw replay-protection-only? empty
| +--:(auth-tls) {tls}?
| +--rw tls
+--ro pcep-state
+--ro entity
+--ro addr? inet:ip-address
+--ro index? uint32
+--ro admin-status? pcep-admin-status
+--ro oper-status? pcep-admin-status
+--ro role? pcep-role
+--ro domain
| +--ro domain* [domain-type domain]
| +--ro domain-type domain-type
| +--ro domain domain
+--ro capability
| +--ro gmpls? boolean {gmpls}?
| +--ro bi-dir? boolean
| +--ro diverse? boolean
| +--ro load-balance? boolean
| +--ro synchronize? boolean {svec}?
| +--ro objective-function? boolean {obj-fn}?
| +--ro add-path-constraint? boolean
| +--ro prioritization? boolean
| +--ro multi-request? boolean
| +--ro gco? boolean {gco}?
| +--ro p2mp? boolean {p2mp}?
| +--ro stateful {stateful}?
| | +--ro enabled? boolean
| | +--ro active? boolean
| | +--ro pce-initiated? boolean {pce-initiated}?
| +--ro sr {sr}?
| +--ro enabled? boolean
| +--ro msd? uint8
+--ro pce-info
| +--ro scope
| | +--ro intra-area-scope? boolean
| | +--ro intra-area-pref? uint8
| | +--ro inter-area-scope? boolean
| | +--ro inter-area-scope-default? boolean
| | +--ro inter-area-pref? uint8
| | +--ro inter-as-scope? boolean
| | +--ro inter-as-scope-default? boolean
| | +--ro inter-as-pref? uint8
| | +--ro inter-layer-scope? boolean
| | +--ro inter-layer-pref? uint8
| +--ro neigh-domains
| | +--ro domain* [domain-type domain]
| | +--ro domain-type domain-type
| | +--ro domain domain
| +--ro (auth-type-selection)?
| +--:(auth-key-chain)
| | +--ro key-chain? key-chain:key-chain-ref
| +--:(auth-key)
| | +--ro key? string
| | +--ro crypto-algorithm
| | +--ro (algorithm)?
| | +--:(hmac-sha-1-12) {crypto-hmac-sha-1-12}?
| | | +--ro hmac-sha1-12? empty
| | +--:(aes-cmac-prf-128) {aes-cmac-prf-128}?
| | | +--ro aes-cmac-prf-128? empty
| | +--:(md5)
| | | +--ro md5? empty
| | +--:(sha-1)
| | | +--ro sha-1? empty
| | +--:(hmac-sha-1)
| | | +--ro hmac-sha-1? empty
| | +--:(hmac-sha-256)
| | | +--ro hmac-sha-256? empty
| | +--:(hmac-sha-384)
| | | +--ro hmac-sha-384? empty
| | +--:(hmac-sha-512)
| | | +--ro hmac-sha-512? empty
| | +--:(clear-text) {clear-text}?
| | | +--ro clear-text? empty
| | +--:(replay-protection-only) {replay-protection-only}?
| | +--ro replay-protection-only? empty
| +--:(auth-tls) {tls}?
| +--ro tls
+--ro connect-timer? uint32
+--ro connect-max-retry? uint32
+--ro init-backoff-timer? uint32
+--ro max-backoff-timer? uint32
+--ro open-wait-timer? uint32
+--ro keep-wait-timer? uint32
+--ro keep-alive-timer? uint32
+--ro dead-timer? uint32
+--ro allow-negotiation? boolean
+--ro max-keep-alive-timer? uint32
+--ro max-dead-timer? uint32
+--ro min-keep-alive-timer? uint32
+--ro min-dead-timer? uint32
+--ro sync-timer? uint32 {svec}?
+--ro request-timer? uint32
+--ro max-sessions? uint32
+--ro max-unknown-reqs? uint32
+--ro max-unknown-msgs? uint32
+--ro stateful-parameter {stateful}?
| +--ro state-timeout? uint32
| +--ro redelegation-timeout? uint32
| +--ro rpt-non-pcep-lsp? boolean
+--ro lsp-db {stateful}?
| +--ro association-list* [id source global-source extended-id]
| | +--ro type? assoc-type
| | +--ro id uint16
| | +--ro source inet:ip-address
| | +--ro global-source uint32
| | +--ro extended-id string
| | +--ro lsp* [plsp-id pcc-id]
| | +--ro plsp-id -> /pcep-state/entity/lsp-db/lsp/plsp-id
| | +--ro pcc-id -> /pcep-state/entity/lsp-db/lsp/pcc-id
| +--ro lsp* [plsp-id pcc-id]
| +--ro plsp-id uint32
| +--ro pcc-id inet:ip-address
| +--ro lsp-ref
| | +--ro source? -> /te:te/lsps-state/lsp/source
| | +--ro destination? -> /te:te/lsps-state/lsp/destination
| | +--ro tunnel-id? -> /te:te/lsps-state/lsp/tunnel-id
| | +--ro lsp-id? -> /te:te/lsps-state/lsp/lsp-id
| | +--ro extended-tunnel-id? -> /te:te/lsps-state/lsp/extended-tunnel-id
| | +--ro type? -> /te:te/lsps-state/lsp/type
| +--ro admin-state? boolean
| +--ro operational-state? operational-state
| +--ro delegated
| | +--ro enabled? boolean
| | +--ro pce? -> /pcep-state/entity/peers/peer/addr
| | +--ro srp-id? uint32
| +--ro initiation {pce-initiated}?
| | +--ro enabled? boolean
| | +--ro pce? -> /pcep-state/entity/peers/peer/addr
| +--ro symbolic-path-name? string
| +--ro last-error? lsp-error
| +--ro pst? pst
| +--ro association-list* [id source global-source extended-id]
| +--ro id -> /pcep-state/entity/lsp-db/association-list/id
| +--ro source -> /pcep-state/entity/lsp-db/association-list/source
| +--ro global-source -> /pcep-state/entity/lsp-db/association-list/global-source
| +--ro extended-id -> /pcep-state/entity/lsp-db/association-list/extended-id
+--ro peers
+--ro peer* [addr]
+--ro addr inet:ip-address
+--ro role? pcep-role
+--ro domain
| +--ro domain* [domain-type domain]
| +--ro domain-type domain-type
| +--ro domain domain
+--ro capability
| +--ro gmpls? boolean {gmpls}?
| +--ro bi-dir? boolean
| +--ro diverse? boolean
| +--ro load-balance? boolean
| +--ro synchronize? boolean {svec}?
| +--ro objective-function? boolean {obj-fn}?
| +--ro add-path-constraint? boolean
| +--ro prioritization? boolean
| +--ro multi-request? boolean
| +--ro gco? boolean {gco}?
| +--ro p2mp? boolean {p2mp}?
| +--ro stateful {stateful}?
| | +--ro enabled? boolean
| | +--ro active? boolean
| | +--ro pce-initiated? boolean {pce-initiated}?
| +--ro sr {sr}?
| +--ro enabled? boolean
| +--ro msd? uint8
+--ro pce-info
| +--ro scope
| | +--ro intra-area-scope? boolean
| | +--ro intra-area-pref? uint8
| | +--ro inter-area-scope? boolean
| | +--ro inter-area-scope-default? boolean
| | +--ro inter-area-pref? uint8
| | +--ro inter-as-scope? boolean
| | +--ro inter-as-scope-default? boolean
| | +--ro inter-as-pref? uint8
| | +--ro inter-layer-scope? boolean
| | +--ro inter-layer-pref? uint8
| +--ro neigh-domains
| +--ro domain* [domain-type domain]
| +--ro domain-type domain-type
| +--ro domain domain
+--ro delegation-pref? uint8 {stateful}?
+--ro (auth-type-selection)?
| +--:(auth-key-chain)
| | +--ro key-chain? key-chain:key-chain-ref
| +--:(auth-key)
| | +--ro key? string
| | +--ro crypto-algorithm
| | +--ro (algorithm)?
| | +--:(hmac-sha-1-12) {crypto-hmac-sha-1-12}?
| | | +--ro hmac-sha1-12? empty
| | +--:(aes-cmac-prf-128) {aes-cmac-prf-128}?
| | | +--ro aes-cmac-prf-128? empty
| | +--:(md5)
| | | +--ro md5? empty
| | +--:(sha-1)
| | | +--ro sha-1? empty
| | +--:(hmac-sha-1)
| | | +--ro hmac-sha-1? empty
| | +--:(hmac-sha-256)
| | | +--ro hmac-sha-256? empty
| | +--:(hmac-sha-384)
| | | +--ro hmac-sha-384? empty
| | +--:(hmac-sha-512)
| | | +--ro hmac-sha-512? empty
| | +--:(clear-text) {clear-text}?
| | | +--ro clear-text? empty
| | +--:(replay-protection-only) {replay-protection-only}?
| | +--ro replay-protection-only? empty
| +--:(auth-tls) {tls}?
| +--ro tls
+--ro discontinuity-time? yang:timestamp
+--ro initiate-session? boolean
+--ro session-exists? boolean
+--ro num-sess-setup-ok? yang:counter32
+--ro num-sess-setup-fail? yang:counter32
+--ro session-up-time? yang:timestamp
+--ro session-fail-time? yang:timestamp
+--ro session-fail-up-time? yang:timestamp
+--ro pcep-stats
| +--ro avg-rsp-time? uint32
| +--ro lwm-rsp-time? uint32
| +--ro hwm-rsp-time? uint32
| +--ro num-pcreq-sent? yang:counter32
| +--ro num-pcreq-rcvd? yang:counter32
| +--ro num-pcrep-sent? yang:counter32
| +--ro num-pcrep-rcvd? yang:counter32
| +--ro num-pcerr-sent? yang:counter32
| +--ro num-pcerr-rcvd? yang:counter32
| +--ro num-pcntf-sent? yang:counter32
| +--ro num-pcntf-rcvd? yang:counter32
| +--ro num-keepalive-sent? yang:counter32
| +--ro num-keepalive-rcvd? yang:counter32
| +--ro num-unknown-rcvd? yang:counter32
| +--ro num-corrupt-rcvd? yang:counter32
| +--ro num-req-sent? yang:counter32
| +--ro num-req-sent-pend-rep? yang:counter32
| +--ro num-req-sent-ero-rcvd? yang:counter32
| +--ro num-req-sent-nopath-rcvd? yang:counter32
| +--ro num-req-sent-cancel-rcvd? yang:counter32
| +--ro num-req-sent-error-rcvd? yang:counter32
| +--ro num-req-sent-timeout? yang:counter32
| +--ro num-req-sent-cancel-sent? yang:counter32
| +--ro num-req-rcvd? yang:counter32
| +--ro num-req-rcvd-pend-rep? yang:counter32
| +--ro num-req-rcvd-ero-sent? yang:counter32
| +--ro num-req-rcvd-nopath-sent? yang:counter32
| +--ro num-req-rcvd-cancel-sent? yang:counter32
| +--ro num-req-rcvd-error-sent? yang:counter32
| +--ro num-req-rcvd-cancel-rcvd? yang:counter32
| +--ro num-rep-rcvd-unknown? yang:counter32
| +--ro num-req-rcvd-unknown? yang:counter32
| +--ro svec {svec}?
| | +--ro num-svec-sent? yang:counter32
| | +--ro num-svec-req-sent? yang:counter32
| | +--ro num-svec-rcvd? yang:counter32
| | +--ro num-svec-req-rcvd? yang:counter32
| +--ro stateful {stateful}?
| | +--ro num-pcrpt-sent? yang:counter32
| | +--ro num-pcrpt-rcvd? yang:counter32
| | +--ro num-pcupd-sent? yang:counter32
| | +--ro num-pcupd-rcvd? yang:counter32
| | +--ro num-rpt-sent? yang:counter32
| | +--ro num-rpt-rcvd? yang:counter32
| | +--ro num-rpt-rcvd-error-sent? yang:counter32
| | +--ro num-upd-sent? yang:counter32
| | +--ro num-upd-rcvd? yang:counter32
| | +--ro num-upd-rcvd-unknown? yang:counter32
| | +--ro num-upd-rcvd-undelegated? yang:counter32
| | +--ro num-upd-rcvd-error-sent? yang:counter32
| | +--ro initiation {pce-initiated}?
| | +--ro num-pcinitiate-sent? yang:counter32
| | +--ro num-pcinitiate-rcvd? yang:counter32
| | +--ro num-initiate-sent? yang:counter32
| | +--ro num-initiate-rcvd? yang:counter32
| | +--ro num-initiate-rcvd-error-sent? yang:counter32
| +--ro num-req-sent-closed? yang:counter32
| +--ro num-req-rcvd-closed? yang:counter32
+--ro sessions
+--ro session* [initiator]
+--ro initiator pcep-initiator
+--ro state-last-change? yang:timestamp
+--ro state? pcep-sess-state
+--ro session-creation? yang:timestamp
+--ro connect-retry? yang:counter32
+--ro local-id? uint32
+--ro remote-id? uint32
+--ro keepalive-timer? uint32
+--ro peer-keepalive-timer? uint32
+--ro dead-timer? uint32
+--ro peer-dead-timer? uint32
+--ro ka-hold-time-rem? uint32
+--ro overloaded? boolean
+--ro overload-time? uint32
+--ro peer-overloaded? boolean
+--ro peer-overload-time? uint32
+--ro lspdb-sync? sync-state {stateful}?
+--ro discontinuity-time? yang:timestamp
+--ro pcep-stats
+--ro avg-rsp-time? uint32
+--ro lwm-rsp-time? uint32
+--ro hwm-rsp-time? uint32
+--ro num-pcreq-sent? yang:counter32
+--ro num-pcreq-rcvd? yang:counter32
+--ro num-pcrep-sent? yang:counter32
+--ro num-pcrep-rcvd? yang:counter32
+--ro num-pcerr-sent? yang:counter32
+--ro num-pcerr-rcvd? yang:counter32
+--ro num-pcntf-sent? yang:counter32
+--ro num-pcntf-rcvd? yang:counter32
+--ro num-keepalive-sent? yang:counter32
+--ro num-keepalive-rcvd? yang:counter32
+--ro num-unknown-rcvd? yang:counter32
+--ro num-corrupt-rcvd? yang:counter32
+--ro num-req-sent? yang:counter32
+--ro num-req-sent-pend-rep? yang:counter32
+--ro num-req-sent-ero-rcvd? yang:counter32
+--ro num-req-sent-nopath-rcvd? yang:counter32
+--ro num-req-sent-cancel-rcvd? yang:counter32
+--ro num-req-sent-error-rcvd? yang:counter32
+--ro num-req-sent-timeout? yang:counter32
+--ro num-req-sent-cancel-sent? yang:counter32
+--ro num-req-rcvd? yang:counter32
+--ro num-req-rcvd-pend-rep? yang:counter32
+--ro num-req-rcvd-ero-sent? yang:counter32
+--ro num-req-rcvd-nopath-sent? yang:counter32
+--ro num-req-rcvd-cancel-sent? yang:counter32
+--ro num-req-rcvd-error-sent? yang:counter32
+--ro num-req-rcvd-cancel-rcvd? yang:counter32
+--ro num-rep-rcvd-unknown? yang:counter32
+--ro num-req-rcvd-unknown? yang:counter32
+--ro svec {svec}?
| +--ro num-svec-sent? yang:counter32
| +--ro num-svec-req-sent? yang:counter32
| +--ro num-svec-rcvd? yang:counter32
| +--ro num-svec-req-rcvd? yang:counter32
+--ro stateful {stateful}?
+--ro num-pcrpt-sent? yang:counter32
+--ro num-pcrpt-rcvd? yang:counter32
+--ro num-pcupd-sent? yang:counter32
+--ro num-pcupd-rcvd? yang:counter32
+--ro num-rpt-sent? yang:counter32
+--ro num-rpt-rcvd? yang:counter32
+--ro num-rpt-rcvd-error-sent? yang:counter32
+--ro num-upd-sent? yang:counter32
+--ro num-upd-rcvd? yang:counter32
+--ro num-upd-rcvd-unknown? yang:counter32
+--ro num-upd-rcvd-undelegated? yang:counter32
+--ro num-upd-rcvd-error-sent? yang:counter32
+--ro initiation {pce-initiated}?
+--ro num-pcinitiate-sent? yang:counter32
+--ro num-pcinitiate-rcvd? yang:counter32
+--ro num-initiate-sent? yang:counter32
+--ro num-initiate-rcvd? yang:counter32
+--ro num-initiate-rcvd-error-sent? yang:counter32
notifications:
+---n pcep-session-up
| +--ro peer-addr? -> /pcep-state/entity/peers/peer/addr
| +--ro session-initiator? -> /pcep-state/entity/peers/peer/sessions/session/initiator
| +--ro state-last-change? yang:timestamp
| +--ro state? pcep-sess-state
+---n pcep-session-down
| +--ro peer-addr? -> /pcep-state/entity/peers/peer/addr
| +--ro session-initiator? pcep-initiator
| +--ro state-last-change? yang:timestamp
| +--ro state? pcep-sess-state
+---n pcep-session-local-overload
| +--ro peer-addr? -> /pcep-state/entity/peers/peer/addr
| +--ro session-initiator? -> /pcep-state/entity/peers/peer/sessions/session/initiator
| +--ro overloaded? boolean
| +--ro overload-time? uint32
+---n pcep-session-local-overload-clear
| +--ro peer-addr? -> /pcep-state/entity/peers/peer/addr
| +--ro overloaded? boolean
+---n pcep-session-peer-overload
| +--ro peer-addr? -> /pcep-state/entity/peers/peer/addr
| +--ro session-initiator? -> /pcep-state/entity/peers/peer/sessions/session/initiator
| +--ro peer-overloaded? boolean
| +--ro peer-overload-time? uint32
+---n pcep-session-peer-overload-clear
+--ro peer-addr? -> /pcep-state/entity/peers/peer/addr
+--ro peer-overloaded? boolean
The module, "ietf-pcep", defines the basic components of a PCE speaker.
The PCEP yang module may contain status information for the local PCEP entity.
The entity has an IP address (using ietf-inet-types [RFC6991]) and a "role" leaf (the local entity PCEP role) as mandatory.
Note that, the PCEP MIB module [RFC7420] uses an entity list and a system generated entity index as a primary index to the read only entity table. If the device implements the PCEP MIB, the "index" leaf MUST contain the value of the corresponding pcePcepEntityIndex and only one entity is assumed.
The peer list contains peer(s) that the local PCEP entity knows about. A PCEP speaker is identified by its IP address. If there is a PCEP speaker in the network that uses multiple IP addresses then it looks like multiple distinct peers to the other PCEP speakers in the network.
Since PCEP sessions can be ephemeral, the peer list tracks a peer even when no PCEP session currently exists to that peer. The statistics contained are an aggregate of the statistics for all successive sessions to that peer.
To limit the quantity of information that is stored, an implementation MAY choose to discard this information if and only if no PCEP session exists to the corresponding peer.
The data model for PCEP peer presented in this document uses a flat list of peers. Each peer in the list is identified by its IP address (addr-type, addr).
There is one list for static peer configuration ("/pcep/entity/peers"), and a separate list for the operational state of all peers (i.e. static as well as discovered)("/pcep-state/entity/peers"). The former is used to enable remote PCE configuration at PCC (or PCE) while the latter has the operational state of these peers as well as the remote PCE peer which were discovered and PCC peers that have initiated session.
The session list contains PCEP session that the PCEP entity (PCE or PCC) is currently participating in. The statistics in session are semantically different from those in peer since the former applies to the current session only, whereas the latter is the aggregate for all sessions that have existed to that peer.
Although [RFC5440] forbids more than one active PCEP session between a given pair of PCEP entities at any given time, there is a window during session establishment where two sessions may exist for a given pair, one representing a session initiated by the local PCEP entity and the other representing a session initiated by the peer. If either of these sessions reaches active state first, then the other is discarded.
The data model for PCEP session presented in this document uses a flat list of sessions. Each session in the list is identified by its initiator. This index allows two sessions to exist transiently for a given peer, as discussed above.
There is only one list for the operational state of all sessions ("/pcep-state/entity/peers/peer/sessions/session").
This YANG model defines a list of notifications to inform client of important events detected during the protocol operation. The notifications defined cover the PCEP MIB notifications.
This document contains a specification of the base PCEP YANG module, "ietf-pcep" which provides the basic PCEP [RFC5440] data model.
This document further handles advanced PCE features like -
[Editor's Note - Some of them would be added in a future revision.]
In the operational state of PCEP which supports stateful PCE mode, the list of LSP state are maintained in LSP-DB. The key is the PLSP-ID and the PCC IP address.
The PCEP data model contains the operational state of LSPs (/pcep-state/entity/lsp-db/lsp/) with PCEP specific attributes. The generic TE attributes of the LSP are defined in [I-D.ietf-teas-yang-te]. A reference to LSP state in TE model is maintained.
This section is added so that open issues can be tracked. This section would be removed when the document is ready for publication.
The TE Model at [I-D.ietf-teas-yang-te] should support creationg of tunnels at the controller (PCE) and marking them as PCE-Initiated. The LSP-DB in the PCEP Yang (/pcep-state/entity/lsp-db/lsp/initiation) also marks the LSPs which are PCE-initiated.
A future version of this document would add TLS related configurations.
RFC Ed.: In this section, replace all occurrences of 'XXXX' with the actual RFC number and all occurrences of the revision date below with the date of RFC publication (and remove this note).
<CODE BEGINS> file "ietf-pcep@2016-07-07.yang"
module ietf-pcep {
namespace "urn:ietf:params:xml:ns:yang:ietf-pcep";
prefix pcep;
import ietf-inet-types {
prefix "inet";
}
import ietf-yang-types {
prefix "yang";
}
import ietf-te {
prefix "te";
}
import ietf-key-chain {
prefix "key-chain";
}
organization
"IETF PCE (Path Computation Element) Working Group";
contact
"WG Web: <http://tools.ietf.org/wg/pce/>
WG List: <mailto:pce@ietf.org>
WG Chair: JP Vasseur
<mailto:jpv@cisco.com>
WG Chair: Julien Meuric
<mailto:julien.meuric@orange.com>
WG Chair: Jonathan Hardwick
<mailto:Jonathan.Hardwick@metaswitch.com>
Editor: Dhruv Dhody
<mailto:dhruv.ietf@gmail.com>";
description
"The YANG module defines a generic configuration and
operational model for PCEP common across all of the
vendor implementations.";
revision 2016-07-07 {
description "Initial revision.";
reference
"RFC XXXX: A YANG Data Model for Path Computation
Element Communications Protocol
(PCEP)";
}
/*
* Identities
*/
identity pcep {
description "Identity for the PCEP protocol.";
}
/*
* Typedefs
*/
typedef pcep-role {
type enumeration {
enum unknown {
value "0";
description
"An unknown role";
}
enum pcc {
value "1";
description
"The role of a Path Computation Client";
}
enum pce {
value "2";
description
"The role of Path Computation Element";
}
enum pcc-and-pce {
value "3";
description
"The role of both Path Computation Client and
Path Computation Element";
}
}
description
"The role of a PCEP speaker.
Takes one of the following values
- unknown(0): the role is not known.
- pcc(1): the role is of a Path Computation
Client (PCC).
- pce(2): the role is of a Path Computation
Server (PCE).
- pccAndPce(3): the role is of both a PCC and
a PCE.";
}
typedef pcep-admin-status {
type enumeration {
enum admin-status-up {
value "1";
description
"Admin Status is Up";
}
enum admin-status-down {
value "2";
description
"Admin Status is Down";
}
}
description
"The Admin Status of the PCEP entity.
Takes one of the following values
- admin-status-up(1): Admin Status is Up.
- admin-status-down(2): Admin Status is Down";
}
typedef pcep-oper-status {
type enumeration {
enum oper-status-up {
value "1";
description
"The PCEP entity is active";
}
enum oper-status-down {
value "2";
description
"The PCEP entity is inactive";
}
enum oper-status-going-up {
value "3";
description
"The PCEP entity is activating";
}
enum oper-status-going-down {
value "4";
description
"The PCEP entity is deactivating";
}
enum oper-status-failed {
value "5";
description
"The PCEP entity has failed and will recover
when possible.";
}
enum oper-status-failed-perm {
value "6";
description
"The PCEP entity has failed and will not recover
without operator intervention";
}
}
description
"The operational status of the PCEP entity.
Takes one of the following values
- oper-status-up(1): Active
- oper-status-down(2): Inactive
- oper-status-going-up(3): Activating
- oper-status-going-down(4): Deactivating
- oper-status-failed(5): Failed
- oper-status-failed-perm(6): Failed Permanantly";
}
typedef pcep-initiator {
type enumeration {
enum local {
value "1";
description
"The local PCEP entity initiated the session";
}
enum remote {
value "2";
description
"The remote PCEP peer initiated the session";
}
}
description
"The initiator of the session, that is, whether the TCP
connection was initiated by the local PCEP entity or
the remote peer.
Takes one of the following values
- local(1): Initiated locally
- remote(2): Initiated remotely";
}
typedef pcep-sess-state {
type enumeration {
enum tcp-pending {
value "1";
description
"The tcp-pending state of PCEP session.";
}
enum open-wait {
value "2";
description
"The open-wait state of PCEP session.";
}
enum keep-wait {
value "3";
description
"The keep-wait state of PCEP session.";
}
enum session-up {
value "4";
description
"The session-up state of PCEP session.";
}
}
description
"The current state of the session.
The set of possible states excludes the idle state
since entries do not exist in the idle state.
Takes one of the following values
- tcp-pending(1): PCEP TCP Pending state
- open-wait(2): PCEP Open Wait state
- keep-wait(3): PCEP Keep Wait state
- session-up(4): PCEP Session Up state";
}
typedef domain-type {
type enumeration {
enum ospf-area {
value "1";
description
"The OSPF area.";
}
enum isis-area {
value "2";
description
"The IS-IS area.";
}
enum as {
value "3";
description
"The Autonomous System (AS).";
}
}
description
"The PCE Domain Type";
}
typedef domain-ospf-area {
type union {
type uint32;
type yang:dotted-quad;
}
description
"OSPF Area ID.";
}
typedef domain-isis-area {
type string {
pattern '[0-9A-Fa-f]{2}\.([0-9A-Fa-f]{4}\.){0,3}';
}
description
"IS-IS Area ID.";
}
typedef domain-as {
type uint32;
description
"Autonomous System number.";
}
typedef domain {
type union {
type domain-ospf-area;
type domain-isis-area;
type domain-as;
}
description
"The Domain Information";
}
typedef operational-state {
type enumeration {
enum down {
value "0";
description
"not active.";
}
enum up {
value "1";
description
"signalled.";
}
enum active {
value "2";
description
"up and carrying traffic.";
}
enum going-down {
value "3";
description
"LSP is being torn down, resources are
being released.";
}
enum going-up {
value "4";
description
"LSP is being signalled.";
}
}
description
"The operational status of the LSP";
}
typedef lsp-error {
type enumeration {
enum no-error {
value "0";
description
"No error, LSP is fine.";
}
enum unknown {
value "1";
description
"Unknown reason.";
}
enum limit {
value "2";
description
"Limit reached for PCE-controlled LSPs.";
}
enum pending {
value "3";
description
"Too many pending LSP update requests.";
}
enum unacceptable {
value "4";
description
"Unacceptable parameters.";
}
enum internal {
value "5";
description
"Internal error.";
}
enum admin {
value "6";
description
"LSP administratively brought down.";
}
enum preempted {
value "7";
description
"LSP preempted.";
}
enum rsvp {
value "8";
description
"RSVP signaling error.";
}
}
description
"The LSP Error Codes.";
}
typedef sync-state {
type enumeration {
enum pending {
value "0";
description
"The state synchronization
has not started.";
}
enum ongoing {
value "1";
description
"The state synchronization
is ongoing.";
}
enum finished {
value "2";
description
"The state synchronization
is finished.";
}
}
description
"The LSP-DB state synchronization operational status.";
}
typedef pst{
type enumeration{
enum rsvp-te{
value "0";
description
"RSVP-TE signaling protocol";
}
enum sr{
value "1";
description
"Segment Routing Traffic Engineering";
}
}
description
"The Path Setup Type";
}
typedef assoc-type{
type enumeration{
enum protection{
value "1";
description
"Path Protection Association Type";
}
}
description
"The PCEP Association Type";
}
/*
* Features
*/
feature svec {
description
"Support synchronized path computation.";
}
feature gmpls {
description
"Support GMPLS.";
}
feature obj-fn {
description
"Support OF as per RFC 5541.";
}
feature gco {
description
"Support GCO as per RFC 5557.";
}
feature pathkey {
description
"Support pathkey as per RFC 5520.";
}
feature p2mp {
description
"Support P2MP as per RFC 6006.";
}
feature stateful {
description
"Support stateful PCE.";
}
feature pce-initiated {
description
"Support PCE-Initiated LSP.";
}
feature tls {
description
"Support PCEP over TLS.";
}
feature sr {
description
"Support Segement Routing for PCE.";
}
/*
* Groupings
*/
grouping pcep-entity-info{
description
"This grouping defines the attributes for PCEP entity.";
leaf connect-timer {
type uint32 {
range "1..65535";
}
units "seconds";
default 60;
description
"The time in seconds that the PCEP entity will wait
to establish a TCP connection with a peer. If a
TCP connection is not established within this time
then PCEP aborts the session setup attempt.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf connect-max-retry {
type uint32;
default 5;
description
"The maximum number of times the system tries to
establish a TCP connection to a peer before the
session with the peer transitions to the idle
state.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf init-backoff-timer {
type uint32 {
range "1..65535";
}
units "seconds";
description
"The initial back-off time in seconds for retrying
a failed session setup attempt to a peer.
The back-off time increases for each failed
session setup attempt, until a maximum back-off
time is reached. The maximum back-off time is
max-backoff-timer.";
}
leaf max-backoff-timer {
type uint32;
units "seconds";
description
"The maximum back-off time in seconds for retrying
a failed session setup attempt to a peer.
The back-off time increases for each failed session
setup attempt, until this maximum value is reached.
Session setup attempts then repeat periodically
without any further increase in back-off time.";
}
leaf open-wait-timer {
type uint32 {
range "1..65535";
}
units "seconds";
default 60;
description
"The time in seconds that the PCEP entity will wait
to receive an Open message from a peer after the
TCP connection has come up.
If no Open message is received within this time then
PCEP terminates the TCP connection and deletes the
associated sessions.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf keep-wait-timer {
type uint32 {
range "1..65535";
}
units "seconds";
default 60;
description
"The time in seconds that the PCEP entity will wait
to receive a Keepalive or PCErr message from a peer
during session initialization after receiving an
Open message. If no Keepalive or PCErr message is
received within this time then PCEP terminates the
TCP connection and deletes the associated
sessions.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf keep-alive-timer {
type uint32 {
range "0..255";
}
units "seconds";
default 30;
description
"The keep alive transmission timer that this PCEP
entity will propose in the initial OPEN message of
each session it is involved in. This is the
maximum time between two consecutive messages sent
to a peer. Zero means that the PCEP entity prefers
not to send Keepalives at all.
Note that the actual Keepalive transmission
intervals, in either direction of an active PCEP
session, are determined by negotiation between the
peers as specified by RFC 5440, and so may differ
from this configured value.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf dead-timer {
type uint32 {
range "0..255";
}
units "seconds";
must ". >= ../keep-alive-timer" {
error-message "The dead timer must be "
+ "larger than the keep alive timer";
description
"This value MUST be greater than
keep-alive-timer.";
}
default 120;
description
"The dead timer that this PCEP entity will propose
in the initial OPEN message of each session it is
involved in. This is the time after which a peer
should declare a session down if it does not
receive any PCEP messages. Zero suggests that the
peer does not run a dead timer at all." ;
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf allow-negotiation{
type boolean;
description
"Whether the PCEP entity will permit negotiation of
session parameters.";
}
leaf max-keep-alive-timer{
type uint32 {
range "0..255";
}
units "seconds";
description
"In PCEP session parameter negotiation in seconds,
the maximum value that this PCEP entity will
accept from a peer for the interval between
Keepalive transmissions. Zero means that the PCEP
entity will allow no Keepalive transmission at
all." ;
}
leaf max-dead-timer{
type uint32 {
range "0..255";
}
units "seconds";
description
"In PCEP session parameter negotiation in seconds,
the maximum value that this PCEP entity will accept
from a peer for the Dead timer. Zero means that
the PCEP entity will allow not running a Dead
timer.";
}
leaf min-keep-alive-timer{
type uint32 {
range "0..255";
}
units "seconds";
description
"In PCEP session parameter negotiation in seconds,
the minimum value that this PCEP entity will
accept for the interval between Keepalive
transmissions. Zero means that the PCEP entity
insists on no Keepalive transmission at all.";
}
leaf min-dead-timer{
type uint32 {
range "0..255";
}
units "seconds";
description
"In PCEP session parameter negotiation in
seconds, the minimum value that this PCEP entity
will accept for the Dead timer. Zero means that
the PCEP entity insists on not running a Dead
timer.";
}
leaf sync-timer{
if-feature svec;
type uint32 {
range "0..65535";
}
units "seconds";
default 60;
description
"The value of SyncTimer in seconds is used in the
case of synchronized path computation request
using the SVEC object. Consider the case where a
PCReq message is received by a PCE that contains
the SVEC object referring to M synchronized path
computation requests. If after the expiration of
the SyncTimer all the M path computation requests
have not been, received a protocol error is
triggered and the PCE MUST cancel the whole set
of path computation requests.
The aim of the SyncTimer is to avoid the storage
of unused synchronized requests should one of
them get lost for some reasons (for example, a
misbehaving PCC).
Zero means that the PCEP entity does not use the
SyncTimer.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf request-timer{
type uint32 {
range "1..65535";
}
units "seconds";
description
"The maximum time that the PCEP entity will wait
for a response to a PCReq message.";
}
leaf max-sessions{
type uint32;
description
"Maximum number of sessions involving this PCEP
entity that can exist at any time.";
}
leaf max-unknown-reqs{
type uint32;
default 5;
description
"The maximum number of unrecognized requests and
replies that any session on this PCEP entity is
willing to accept per minute before terminating
the session.
A PCRep message contains an unrecognized reply
if it contains an RP object whose request ID
does not correspond to any in-progress request
sent by this PCEP entity.
A PCReq message contains an unrecognized request
if it contains an RP object whose request ID is
zero.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
leaf max-unknown-msgs{
type uint32;
default 5;
description
"The maximum number of unknown messages that any
session on this PCEP entity is willing to accept
per minute before terminating the session.";
reference
"RFC 5440: Path Computation Element (PCE)
Communication Protocol (PCEP)";
}
}//pcep-entity-info
grouping pce-scope{
description
"This grouping defines PCE path computation scope
information which maybe relevant to PCE selection.
This information corresponds to PCE auto-discovery
information.";
reference
"RFC 5088: OSPF Protocol Extensions for Path
Computation Element (PCE)
Discovery
RFC 5089: IS-IS Protocol Extensions for Path
Computation Element (PCE)
Discovery";
leaf intra-area-scope{
type boolean;
default true;
description
"PCE can compute intra-area paths.";
}
leaf intra-area-pref{
type uint8{
range "0..7";
}
description
"The PCE's preference for intra-area TE LSP
computation.";
}
leaf inter-area-scope{
type boolean;
default false;
description
"PCE can compute inter-area paths.";
}
leaf inter-area-scope-default{
type boolean;
default false;
description
"PCE can act as a default PCE for inter-area
path computation.";
}
leaf inter-area-pref{
type uint8{
range "0..7";
}
description
"The PCE's preference for inter-area TE LSP
computation.";
}
leaf inter-as-scope{
type boolean;
default false;
description
"PCE can compute inter-AS paths.";
}
leaf inter-as-scope-default{
type boolean;
default false;
description
"PCE can act as a default PCE for inter-AS
path computation.";
}
leaf inter-as-pref{
type uint8{
range "0..7";
}
description
"The PCE's preference for inter-AS TE LSP
computation.";
}
leaf inter-layer-scope{
type boolean;
default false;
description
"PCE can compute inter-layer paths.";
}
leaf inter-layer-pref{
type uint8{
range "0..7";
}
description
"The PCE's preference for inter-layer TE LSP
computation.";
}
}//pce-scope
grouping domain{
description
"This grouping specifies a Domain where the
PCEP speaker has topology visibility.";
leaf domain-type{
type domain-type;
description
"The domain type.";
}
leaf domain{
type domain;
description
"The domain Information.";
}
}//domain
grouping capability{
description
"This grouping specifies a capability
information of local PCEP entity. This maybe
relevant to PCE selection as well. This
information corresponds to PCE auto-discovery
information.";
reference
"RFC 5088: OSPF Protocol Extensions for Path
Computation Element (PCE)
Discovery
RFC 5089: IS-IS Protocol Extensions for Path
Computation Element (PCE)
Discovery";
leaf gmpls{
if-feature gmpls;
type boolean;
description
"Path computation with GMPLS link
constraints.";
}
leaf bi-dir{
type boolean;
description
"Bidirectional path computation.";
}
leaf diverse{
type boolean;
description
"Diverse path computation.";
}
leaf load-balance{
type boolean;
description
"Load-balanced path computation.";
}
leaf synchronize{
if-feature svec;
type boolean;
description
"Synchronized paths computation.";
}
leaf objective-function{
if-feature obj-fn;
type boolean;
description
"Support for multiple objective functions.";
}
leaf add-path-constraint{
type boolean;
description
"Support for additive path constraints (max
hop count, etc.).";
}
leaf prioritization{
type boolean;
description
"Support for request prioritization.";
}
leaf multi-request{
type boolean;
description
"Support for multiple requests per message.";
}
leaf gco{
if-feature gco;
type boolean;
description
"Support for Global Concurrent Optimization
(GCO).";
}
leaf p2mp{
if-feature p2mp;
type boolean;
description
"Support for P2MP path computation.";
}
container stateful{
if-feature stateful;
description
"If stateful PCE feature is present";
leaf enabled{
type boolean;
description
"Enabled or Disabled";
}
leaf active{
type boolean;
description
"Support for active stateful PCE.";
}
leaf pce-initiated{
if-feature pce-initiated;
type boolean;
description
"Support for PCE-initiated LSP.";
}
}
container sr{
if-feature sr;
description
"If segment routing is supported";
leaf enabled{
type boolean;
description
"Enabled or Disabled";
}
leaf msd{ /*should be in MPLS yang model (?)*/
type uint8;
must "((../../role == 'pcc')" +
" or " +
"(../../role == 'pcc-and-pce')))"
{
error-message
"The PCEP entity must be PCC";
description
"When PCEP entity is PCC for
MSD to be applicable";
}
description
"Maximum SID Depth";
}
}
}//capability
grouping info{
description
"This grouping specifies all information which
maybe relevant to both PCC and PCE.
This information corresponds to PCE auto-discovery
information.";
container domain{
description
"The local domain for the PCEP entity";
list domain{
key "domain-type domain";
description
"The local domain.";
uses domain{
description
"The local domain for the PCEP entity.";
}
}
}
container capability{
description
"The PCEP entity capability";
uses capability{
description
"The PCEP entity supported
capabilities.";
}
}
}//info
grouping pce-info{
description
"This grouping specifies all PCE information
which maybe relevant to the PCE selection.
This information corresponds to PCE auto-discovery
information.";
container scope{
description
"The path computation scope";
uses pce-scope;
}
container neigh-domains{
description
"The list of neighbour PCE-Domain
toward which a PCE can compute
paths";
list domain{
key "domain-type domain";
description
"The neighbour domain.";
uses domain{
description
"The PCE neighbour domain.";
}
}
}
}//pce-info
grouping pcep-stats{
description
"This grouping defines statistics for PCEP. It is used
for both peer and current session.";
leaf avg-rsp-time{
type uint32;
units "milliseconds";
must "(/pcep-state/entity/peers/peer/role != 'pcc'" +
" or " +
"(/pcep-state/entity/peers/peer/role = 'pcc'" +
" and avg-rsp-time = 0))" {
error-message
"Invalid average response time";
description
"If role is pcc then this leaf is meaningless
and is set to zero.";
}
description
"The average response time.
If an average response time has not been
calculated then this leaf has the value zero.";
}
leaf lwm-rsp-time{
type uint32;
units "milliseconds";
must "(/pcep-state/entity/peers/peer/role != 'pcc'" +
" or " +
"(/pcep-state/entity/peers/peer/role = 'pcc'" +
" and lwm-rsp-time = 0))" {
error-message
"Invalid smallest (low-water mark)
response time";
description
"If role is pcc then this leaf is meaningless
and is set to zero.";
}
description
"The smallest (low-water mark) response time seen.
If no responses have been received then this
leaf has the value zero.";
}
leaf hwm-rsp-time{
type uint32;
units "milliseconds";
must "(/pcep-state/entity/peers/peer/role != 'pcc'" +
" or " +
"(/pcep-state/entity/peers/peer/role = 'pcc'" +
" and hwm-rsp-time = 0))" {
error-message
"Invalid greatest (high-water mark)
response time seen";
description
"If role is pcc then this field is
meaningless and is set to zero.";
}
description
"The greatest (high-water mark) response time seen.
If no responses have been received then this object
has the value zero.";
}
leaf num-pcreq-sent{
type yang:counter32;
description
"The number of PCReq messages sent.";
}
leaf num-pcreq-rcvd{
type yang:counter32;
description
"The number of PCReq messages received.";
}
leaf num-pcrep-sent{
type yang:counter32;
description
"The number of PCRep messages sent.";
}
leaf num-pcrep-rcvd{
type yang:counter32;
description
"The number of PCRep messages received.";
}
leaf num-pcerr-sent{
type yang:counter32;
description
"The number of PCErr messages sent.";
}
leaf num-pcerr-rcvd{
type yang:counter32;
description
"The number of PCErr messages received.";
}
leaf num-pcntf-sent{
type yang:counter32;
description
"The number of PCNtf messages sent.";
}
leaf num-pcntf-rcvd{
type yang:counter32;
description
"The number of PCNtf messages received.";
}
leaf num-keepalive-sent{
type yang:counter32;
description
"The number of Keepalive messages sent.";
}
leaf num-keepalive-rcvd{
type yang:counter32;
description
"The number of Keepalive messages received.";
}
leaf num-unknown-rcvd{
type yang:counter32;
description
"The number of unknown messages received.";
}
leaf num-corrupt-rcvd{
type yang:counter32;
description
"The number of corrupted PCEP message received.";
}
leaf num-req-sent{
type yang:counter32;
description
"The number of requests sent. A request corresponds
1:1 with an RP object in a PCReq message. This might
be greater than num-pcreq-sent because multiple
requests can be batched into a single PCReq
message.";
}
leaf num-req-sent-pend-rep{
type yang:counter32;
description
"The number of requests that have been sent for
which a response is still pending.";
}
leaf num-req-sent-ero-rcvd{
type yang:counter32;
description
"The number of requests that have been sent for
which a response with an ERO object was received.
Such responses indicate that a path was
successfully computed by the peer.";
}
leaf num-req-sent-nopath-rcvd{
type yang:counter32;
description
"The number of requests that have been sent for
which a response with a NO-PATH object was
received. Such responses indicate that the peer
could not find a path to satisfy the
request.";
}
leaf num-req-sent-cancel-rcvd{
type yang:counter32;
description
"The number of requests that were cancelled with
a PCNtf message.
This might be different than num-pcntf-rcvd because
not all PCNtf messages are used to cancel requests,
and a single PCNtf message can cancel multiple
requests.";
}
leaf num-req-sent-error-rcvd{
type yang:counter32;
description
"The number of requests that were rejected with a
PCErr message.
This might be different than num-pcerr-rcvd because
not all PCErr messages are used to reject requests,
and a single PCErr message can reject multiple
requests.";
}
leaf num-req-sent-timeout{
type yang:counter32;
description
"The number of requests that have been sent to a peer
and have been abandoned because the peer has taken too
long to respond to them.";
}
leaf num-req-sent-cancel-sent{
type yang:counter32;
description
"The number of requests that were sent to the peer and
explicitly cancelled by the local PCEP entity sending
a PCNtf.";
}
leaf num-req-rcvd{
type yang:counter32;
description
"The number of requests received. A request
corresponds 1:1 with an RP object in a PCReq
message.
This might be greater than num-pcreq-rcvd because
multiple requests can be batched into a single
PCReq message.";
}
leaf num-req-rcvd-pend-rep{
type yang:counter32;
description
"The number of requests that have been received for
which a response is still pending.";
}
leaf num-req-rcvd-ero-sent{
type yang:counter32;
description
"The number of requests that have been received for
which a response with an ERO object was sent. Such
responses indicate that a path was successfully
computed by the local PCEP entity.";
}
leaf num-req-rcvd-nopath-sent{
type yang:counter32;
description
"The number of requests that have been received for
which a response with a NO-PATH object was sent. Such
responses indicate that the local PCEP entity could
not find a path to satisfy the request.";
}
leaf num-req-rcvd-cancel-sent{
type yang:counter32;
description
"The number of requests received that were cancelled
by the local PCEP entity sending a PCNtf message.
This might be different than num-pcntf-sent because
not all PCNtf messages are used to cancel requests,
and a single PCNtf message can cancel multiple
requests.";
}
leaf num-req-rcvd-error-sent{
type yang:counter32;
description
"The number of requests received that were cancelled
by the local PCEP entity sending a PCErr message.
This might be different than num-pcerr-sent because
not all PCErr messages are used to cancel requests,
and a single PCErr message can cancel multiple
requests.";
}
leaf num-req-rcvd-cancel-rcvd{
type yang:counter32;
description
"The number of requests that were received from the
peer and explicitly cancelled by the peer sending
a PCNtf.";
}
leaf num-rep-rcvd-unknown{
type yang:counter32;
description
"The number of responses to unknown requests
received. A response to an unknown request is a
response whose RP object does not contain the
request ID of any request that is currently
outstanding on the session.";
}
leaf num-req-rcvd-unknown{
type yang:counter32;
description
"The number of unknown requests that have been
received. An unknown request is a request
whose RP object contains a request ID of
zero.";
}
container svec{
if-feature svec;
description
"If synchronized path computation is supported";
leaf num-svec-sent{
type yang:counter32;
description
"The number of SVEC objects sent in PCReq messages.
An SVEC object represents a set of synchronized
requests.";
}
leaf num-svec-req-sent{
type yang:counter32;
description
"The number of requests sent that appeared in one
or more SVEC objects.";
}
leaf num-svec-rcvd{
type yang:counter32;
description
"The number of SVEC objects received in PCReq
messages. An SVEC object represents a set of
synchronized requests.";
}
leaf num-svec-req-rcvd{
type yang:counter32;
description
"The number of requests received that appeared
in one or more SVEC objects.";
}
}
container stateful{
if-feature stateful;
description
"Stateful PCE related statistics";
leaf num-pcrpt-sent{
type yang:counter32;
description
"The number of PCRpt messages sent.";
}
leaf num-pcrpt-rcvd{
type yang:counter32;
description
"The number of PCRpt messages received.";
}
leaf num-pcupd-sent{
type yang:counter32;
description
"The number of PCUpd messages sent.";
}
leaf num-pcupd-rcvd{
type yang:counter32;
description
"The number of PCUpd messages received.";
}
leaf num-rpt-sent{
type yang:counter32;
description
"The number of LSP Reports sent. A LSP report
corresponds 1:1 with an LSP object in a PCRpt
message. This might be greater than
num-pcrpt-sent because multiple reports can
be batched into a single PCRpt message.";
}
leaf num-rpt-rcvd{
type yang:counter32;
description
"The number of LSP Reports received. A LSP report
corresponds 1:1 with an LSP object in a PCRpt
message.
This might be greater than num-pcrpt-rcvd because
multiple reports can be batched into a single
PCRpt message.";
}
leaf num-rpt-rcvd-error-sent{
type yang:counter32;
description
"The number of reports of LSPs received that were
responded by the local PCEP entity by sending a
PCErr message.";
}
leaf num-upd-sent{
type yang:counter32;
description
"The number of LSP updates sent. A LSP update
corresponds 1:1 with an LSP object in a PCUpd
message. This might be greater than
num-pcupd-sent because multiple updates can
be batched into a single PCUpd message.";
}
leaf num-upd-rcvd{
type yang:counter32;
description
"The number of LSP Updates received. A LSP update
corresponds 1:1 with an LSP object in a PCUpd
message.
This might be greater than num-pcupd-rcvd because
multiple updates can be batched into a single
PCUpd message.";
}
leaf num-upd-rcvd-unknown{
type yang:counter32;
description
"The number of updates to unknown LSPs
received. An update to an unknown LSP is a
update whose LSP object does not contain the
PLSP-ID of any LSP that is currently
present.";
}
leaf num-upd-rcvd-undelegated{
type yang:counter32;
description
"The number of updates to not delegated LSPs
received. An update to an undelegated LSP is a
update whose LSP object does not contain the
PLSP-ID of any LSP that is currently
delegated to current PCEP session.";
}
leaf num-upd-rcvd-error-sent{
type yang:counter32;
description
"The number of updates to LSPs received that were
responded by the local PCEP entity by sending a
PCErr message.";
}
container initiation {
if-feature pce-initiated;
description
"PCE-Initiated related statistics";
leaf num-pcinitiate-sent{
type yang:counter32;
description
"The number of PCInitiate messages sent.";
}
leaf num-pcinitiate-rcvd{
type yang:counter32;
description
"The number of PCInitiate messages received.";
}
leaf num-initiate-sent{
type yang:counter32;
description
"The number of LSP Initiation sent via PCE.
A LSP initiation corresponds 1:1 with an LSP
object in a PCInitiate message. This might be
greater than num-pcinitiate-sent because
multiple initiations can be batched into a
single PCInitiate message.";
}
leaf num-initiate-rcvd{
type yang:counter32;
description
"The number of LSP Initiation received from
PCE. A LSP initiation corresponds 1:1 with
an LSP object in a PCInitiate message. This
might be greater than num-pcinitiate-rcvd
because multiple initiations can be batched
into a single PCInitiate message.";
}
leaf num-initiate-rcvd-error-sent{
type yang:counter32;
description
"The number of initiations of LSPs received
that were responded by the local PCEP entity
by sending a PCErr message.";
}
}
}
}//pcep-stats
grouping lsp-state{
description
"This grouping defines the attributes for LSP in LSP-DB.
These are the attributes specifically from the PCEP
perspective";
leaf plsp-id{
type uint32{
range "1..1048575";
}
description
"A PCEP-specific identifier for the LSP. A PCC
creates a unique PLSP-ID for each LSP that is
constant for the lifetime of a PCEP session.
PLSP-ID is 20 bits with 0 and 0xFFFFF are
reserved";
}
leaf pcc-id{
type inet:ip-address;
description
"The local internet address of the PCC, that
generated the PLSP-ID.";
}
container lsp-ref{
description
"reference to ietf-te lsp state";
leaf source {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:source";
}
description
"Tunnel sender address extracted from
SENDER_TEMPLATE object";
reference "RFC3209";
}
leaf destination {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:"
+ "destination";
}
description
"Tunnel endpoint address extracted from
SESSION object";
reference "RFC3209";
}
leaf tunnel-id {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:tunnel-id";
}
description
"Tunnel identifier used in the SESSION
that remains constant over the life
of the tunnel.";
reference "RFC3209";
}
leaf lsp-id {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:lsp-id";
}
description
"Identifier used in the SENDER_TEMPLATE
and the FILTER_SPEC that can be changed
to allow a sender to share resources with
itself.";
reference "RFC3209";
}
leaf extended-tunnel-id {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:"
+ "extended-tunnel-id";
}
description
"Extended Tunnel ID of the LSP.";
reference "RFC3209";
}
leaf type {
type leafref {
path "/te:te/te:lsps-state/te:lsp/te:type";
}
description "LSP type P2P or P2MP";
}
}
leaf admin-state{
type boolean;
description
"The desired operational state";
}
leaf operational-state{
type operational-state;
description
"The operational status of the LSP";
}
container delegated{
description
"The delegation related parameters";
leaf enabled{
type boolean;
description
"LSP is delegated or not";
}
leaf pce{
type leafref {
path "/pcep-state/entity/peers/peer/addr";
}
must "((../enabled == true)" +
" and " +
"((../../role == 'pcc')" +
" or " +
"(../../role == 'pcc-and-pce')))"
{
error-message
"The PCEP entity must be PCC
and the LSP be delegated";
description
"When PCEP entity is PCC for
delegated LSP";
}
description
"The reference to the PCE peer to
which LSP is delegated";
}
leaf srp-id{
type uint32;
description
"The last SRP-ID-number associated with this
LSP.";
}
}
container initiation {
if-feature pce-initiated;
description
"The PCE initiation related parameters";
leaf enabled{
type boolean;
description
"LSP is PCE-initiated or not";
}
leaf pce{
type leafref {
path "/pcep-state/entity/peers/peer/addr";
}
must "(../enabled == true)"
{
error-message
"The LSP must be PCE-Initiated";
description
"When the LSP must be PCE-Initiated";
}
description
"The reference to the PCE
that initiated this LSP";
}
}
leaf symbolic-path-name{
type string;
description
"The symbolic path name associated with the LSP.";
}
leaf last-error{
type lsp-error;
description
"The last error for the LSP.";
}
leaf pst{
type pst;
default "rsvp-te";
description
"The Path Setup Type";
}
}//lsp-state
grouping notification-instance-hdr {
description
"This group describes common instance specific data
for notifications.";
leaf peer-addr {
type leafref {
path "/pcep-state/entity/peers/peer/addr";
}
description
"Reference to peer address";
}
}// notification-instance-hdr
grouping notification-session-hdr {
description
"This group describes common session instance specific
data for notifications.";
leaf session-initiator {
type leafref {
path "/pcep-state/entity/peers/peer/sessions/" +
"session/initiator";
}
description
"Reference to pcep session initiator leaf";
}
}// notification-session-hdr
grouping stateful-pce-parameter {
description
"This group describes stateful PCE specific
parameters.";
leaf state-timeout{
type uint32;
units "seconds";
description
"When a PCEP session is terminated, a PCC
waits for this time period before flushing
LSP state associated with that PCEP session
and reverting to operator-defined default
parameters or behaviours.";
}
leaf redelegation-timeout{
type uint32;
units "seconds";
must "((../role == 'pcc')" +
" or " +
"(../role == 'pcc-and-pce'))"
{
error-message "The PCEP entity must be PCC";
description
"When PCEP entity is PCC";
}
description
"When a PCEP session is terminated, a PCC
waits for this time period before revoking
LSP delegation to a PCE and attempting to
redelegate LSPs associated with the
terminated PCEP session to an alternate
PCE.";
}
leaf rpt-non-pcep-lsp{
type boolean;
must "((../role == 'pcc')" +
" or " +
"(../role == 'pcc-and-pce'))"
{
error-message "The PCEP entity must be PCC";
description
"When PCEP entity is PCC";
}
description
"If set, a PCC reports LSPs that are not
controlled by any PCE (for example, LSPs
that are statically configured at the
PCC). ";
}
}
grouping authentication {
description "Authentication Information";
choice auth-type-selection {
description
"Options for expressing authentication setting.";
case auth-key-chain {
leaf key-chain {
type key-chain:key-chain-ref;
description
"key-chain name.";
}
}
case auth-key {
leaf key {
type string;
description
"Key string in ASCII format.";
}
container crypto-algorithm {
uses key-chain:crypto-algorithm-types;
description
"Cryptographic algorithm associated
with key.";
}
}
case auth-tls {
if-feature tls;
container tls {
description
"TLS related information - TBD";
}
}
}
}
grouping association {
description
"Generic Association parameters";
leaf type {
type "assoc-type";
description
"The PCEP association type";
}
leaf id {
type uint16;
description
"PCEP Association ID";
}
leaf source {
type inet:ip-address;
description
"PCEP Association Source.";
}
leaf global-source {
type uint32;
description
"PCEP Association Global
Source.";
}
leaf extended-id{
type string;
description
"Additional information to
support unique identification.";
}
}
grouping association-ref {
description
"Generic Association parameters";
leaf id {
type leafref {
path "/pcep-state/entity/lsp-db/"
+ "association-list/id";
}
description
"PCEP Association ID";
}
leaf source {
type leafref {
path "/pcep-state/entity/lsp-db/"
+ "association-list/source";
}
description
"PCEP Association Source.";
}
leaf global-source {
type leafref {
path "/pcep-state/entity/lsp-db/"
+ "association-list/global-source";
}
description
"PCEP Association Global
Source.";
}
leaf extended-id{
type leafref {
path "/pcep-state/entity/lsp-db/"
+ "association-list/extended-id";
}
description
"Additional information to
support unique identification.";
}
}
/*
* Configuration data nodes
*/
container pcep{
presence
"The PCEP is enabled";
description
"Parameters for list of configured PCEP entities
on the device.";
container entity {
description
"The configured PCEP entity on the device.";
leaf addr {
type inet:ip-address;
mandatory true;
description
"The local Internet address of this PCEP
entity.
If operating as a PCE server, the PCEP
entity listens on this address.
If operating as a PCC, the PCEP entity
binds outgoing TCP connections to this
address.
It is possible for the PCEP entity to
operate both as a PCC and a PCE Server, in
which case it uses this address both to
listen for incoming TCP connections and to
bind outgoing TCP connections.";
}
leaf enabled {
type boolean;
default true;
description
"The administrative status of this PCEP
Entity.";
}
leaf role {
type pcep-role;
mandatory true;
description
"The role that this entity can play.
Takes one of the following values.
- unknown(0): this PCEP Entity role is not
known.
- pcc(1): this PCEP Entity is a PCC.
- pce(2): this PCEP Entity is a PCE.
- pcc-and-pce(3): this PCEP Entity is both
a PCC and a PCE.";
}
leaf description {
type string;
description
"Description of the PCEP entity configured
by the user";
}
uses info {
description
"Local PCEP entity information";
}
container pce-info {
must "((../role == 'pce')" +
" or " +
"(../role == 'pcc-and-pce'))"
{
error-message "The PCEP entity must be PCE";
description
"When PCEP entity is PCE";
}
uses pce-info {
description
"Local PCE information";
}
uses authentication {
description
"Local PCE authentication information";
}
description
"The Local PCE Entity PCE information";
}
uses pcep-entity-info {
description
"The configuration related to the PCEP
entity.";
}
leaf pcep-notification-max-rate {
type uint32;
mandatory true;
description
"This variable indicates the maximum number of
notifications issued per second. If events occur
more rapidly, the implementation may simply fail
to emit these notifications during that period,
or may queue them until an appropriate time. A
value of 0 means no notifications are emitted
and all should be discarded (that is, not
queued).";
}
container stateful-parameter{
if-feature stateful;
must "(../info/capability/stateful/active == true)"
{
error-message
"The Active Stateful PCE must be enabled";
description
"When PCEP entity is active stateful
enabled";
}
uses stateful-pce-parameter;
description
"The configured stateful parameters";
}
container peers{
must "((../role == 'pcc')" +
" or " +
"(../role == 'pcc-and-pce'))"
{
error-message
"The PCEP entity must be PCC";
description
"When PCEP entity is PCC, as remote
PCE peers are configured.";
}
description
"The list of configured peers for the
entity (remote PCE)";
list peer{
key "addr";
description
"The peer configured for the entity.
(remote PCE)";
leaf addr {
type inet:ip-address;
description
"The local Internet address of this
PCEP peer.";
}
leaf description {
type string;
description
"Description of the PCEP peer
configured by the user";
}
uses info {
description
"PCE Peer information";
}
uses pce-info {
description
"PCE Peer information";
}
leaf delegation-pref{
if-feature stateful;
type uint8{
range "0..7";
}
must "(../../info/capability/stateful/active"
+ "== true)"
{
error-message
"The Active Stateful PCE must be
enabled";
description
"When PCEP entity is active stateful
enabled";
}
description
"The PCE peer delegation preference.";
}
uses authentication {
description
"PCE Peer authentication";
}
}//peer
}//peers
}//entity
}//pcep
/*
* Operational data nodes
*/
container pcep-state{
config false;
description
"The list of operational PCEP entities on the
device.";
container entity{
description
"The operational PCEP entity on the device.";
leaf addr {
type inet:ip-address;
description
"The local Internet address of this PCEP
entity.
If operating as a PCE server, the PCEP
entity listens on this address.
If operating as a PCC, the PCEP entity
binds outgoing TCP connections to this
address.
It is possible for the PCEP entity to
operate both as a PCC and a PCE Server, in
which case it uses this address both to
listen for incoming TCP connections and to
bind outgoing TCP connections.";
}
leaf index{
type uint32;
description
"The index of the operational PECP
entity";
}
leaf admin-status {
type pcep-admin-status;
description
"The administrative status of this PCEP Entity.
This is the desired operational status as
currently set by an operator or by default in
the implementation. The value of enabled
represents the current status of an attempt
to reach this desired status.";
}
leaf oper-status {
type pcep-admin-status;
description
"The operational status of the PCEP entity.
Takes one of the following values.
- oper-status-up(1): the PCEP entity is
active.
- oper-status-down(2): the PCEP entity is
inactive.
- oper-status-going-up(3): the PCEP entity is
activating.
- oper-status-going-down(4): the PCEP entity is
deactivating.
- oper-status-failed(5): the PCEP entity has
failed and will recover when possible.
- oper-status-failed-perm(6): the PCEP entity
has failed and will not recover without
operator intervention.";
}
leaf role {
type pcep-role;
description
"The role that this entity can play.
Takes one of the following values.
- unknown(0): this PCEP entity role is
not known.
- pcc(1): this PCEP entity is a PCC.
- pce(2): this PCEP entity is a PCE.
- pcc-and-pce(3): this PCEP entity is
both a PCC and a PCE.";
}
uses info {
description
"Local PCEP entity information";
}
container pce-info {
when "((../role == 'pce')" +
" or " +
"(../role == 'pcc-and-pce'))"
{
description
"When PCEP entity is PCE";
}
uses pce-info {
description
"Local PCE information";
}
uses authentication {
description
"Local PCE authentication information";
}
description
"The Local PCE Entity PCE information";
}
uses pcep-entity-info{
description
"The operational information related to the
PCEP entity.";
}
container stateful-parameter{
if-feature stateful;
must "(../info/capability/stateful/active == true)"
{
error-message
"The Active Stateful PCE must be enabled";
description
"When PCEP entity is active stateful
enabled";
}
uses stateful-pce-parameter;
description
"The operational stateful parameters";
}
container lsp-db{
if-feature stateful;
description
"The LSP-DB";
list association-list {
key "id source global-source extended-id";
description
"List of all PCEP associations";
uses association {
description
"The Association attributes";
}
list lsp {
key "plsp-id pcc-id";
description
"List of all LSP in this association";
leaf plsp-id {
type leafref {
path "/pcep-state/entity/lsp-db/"
+ "lsp/plsp-id";
}
description
"Reference to PLSP-ID in LSP-DB";
}
leaf pcc-id {
type leafref {
path "/pcep-state/entity/lsp-db/"
+ "lsp/pcc-id";
}
description
"Reference to PCC-ID in LSP-DB";
}
}
}
list lsp{
key "plsp-id pcc-id";
description
"List of all LSPs in LSP-DB";
uses lsp-state{
description
"The PCEP specific attributes for
LSP-DB.";
}
list association-list {
key "id source global-source extended-id";
description
"List of all PCEP associations";
uses association-ref {
description
"Reference to the Association
attributes";
}
}
}
}
container peers{
description
"The list of peers for the entity";
list peer{
key "addr";
description
"The peer for the entity.";
leaf addr {
type inet:ip-address;
description
"The local Internet address of this PCEP
peer.";
}
leaf role {
type pcep-role;
description
"The role of the PCEP Peer.
Takes one of the following values.
- unknown(0): this PCEP peer role
is not known.
- pcc(1): this PCEP peer is a PCC.
- pce(2): this PCEP peer is a PCE.
- pcc-and-pce(3): this PCEP peer
is both a PCC and a PCE.";
}
uses info {
description
"PCEP peer information";
}
container pce-info {
when "((../role == 'pce')" +
" or " +
"(../role == 'pcc-and-pce'))"
{
description
"When PCEP entity is PCE";
}
uses pce-info {
description
"PCE Peer information";
}
description
"The PCE Peer information";
}
leaf delegation-pref{
if-feature stateful;
type uint8{
range "0..7";
}
must "((../../role == 'pcc')" +
" or " +
"(../../role == 'pcc-and-pce'))"
{
error-message
"The PCEP entity must be PCC";
description
"When PCEP entity is PCC";
}
must "(../../info/capability/stateful/active"
+ " == true)"
{
error-message
"The Active Stateful PCE must be
enabled";
description
"When PCEP entity is active stateful
enabled";
}
description
"The PCE peer delegation preference.";
}
uses authentication {
description
"PCE Peer authentication";
}
leaf discontinuity-time {
type yang:timestamp;
description
"The timestamp of the time when the
information and statistics were
last reset.";
}
leaf initiate-session {
type boolean;
description
"Indicates whether the local PCEP
entity initiates sessions to this peer,
or waits for the peer to initiate a
session.";
}
leaf session-exists{
type boolean;
description
"Indicates whether a session with
this peer currently exists.";
}
leaf num-sess-setup-ok{
type yang:counter32;
description
"The number of PCEP sessions successfully
successfully established with the peer,
including any current session. This
counter is incremented each time a
session with this peer is successfully
established.";
}
leaf num-sess-setup-fail{
type yang:counter32;
description
"The number of PCEP sessions with the peer
that have been attempted but failed
before being fully established. This
counter is incremented each time a
session retry to this peer fails.";
}
leaf session-up-time{
type yang:timestamp;
must "(../num-sess-setup-ok != 0 or " +
"(../num-sess-setup-ok = 0 and " +
"session-up-time = 0))" {
error-message
"Invalid Session Up timestamp";
description
"If num-sess-setup-ok is zero,
then this leaf contains zero.";
}
description
"The timestamp value of the last time a
session with this peer was successfully
established.";
}
leaf session-fail-time{
type yang:timestamp;
must "(../num-sess-setup-fail != 0 or " +
"(../num-sess-setup-fail = 0 and " +
"session-fail-time = 0))" {
error-message
"Invalid Session Fail timestamp";
description
"If num-sess-setup-fail is zero,
then this leaf contains zero.";
}
description
"The timestamp value of the last time a
session with this peer failed to be
established.";
}
leaf session-fail-up-time{
type yang:timestamp;
must "(../num-sess-setup-ok != 0 or " +
"(../num-sess-setup-ok = 0 and " +
"session-fail-up-time = 0))" {
error-message
"Invalid Session Fail from
Up timestamp";
description
"If num-sess-setup-ok is zero,
then this leaf contains zero.";
}
description
"The timestamp value of the last time a
session with this peer failed from
active.";
}
container pcep-stats {
description
"The container for all statistics at peer
level.";
uses pcep-stats{
description
"Since PCEP sessions can be
ephemeral, the peer statistics tracks
a peer even when no PCEP session
currently exists to that peer. The
statistics contained are an aggregate
of the statistics for all successive
sessions to that peer.";
}
leaf num-req-sent-closed{
type yang:counter32;
description
"The number of requests that were
sent to the peer and implicitly
cancelled when the session they were
sent over was closed.";
}
leaf num-req-rcvd-closed{
type yang:counter32;
description
"The number of requests that were
received from the peer and
implicitly cancelled when the
session they were received over
was closed.";
}
}//pcep-stats
container sessions {
description
"This entry represents a single PCEP
session in which the local PCEP entity
participates.
This entry exists only if the
corresponding PCEP session has been
initialized by some event, such as
manual user configuration, auto-
discovery of a peer, or an incoming
TCP connection.";
list session {
key "initiator";
description
"The list of sessions, note that
for a time being two sessions
may exist for a peer";
leaf initiator {
type pcep-initiator;
description
"The initiator of the session,
that is, whether the TCP
connection was initiated by
the local PCEP entity or the
peer.
There is a window during
session initialization where
two sessions can exist between
a pair of PCEP speakers, each
initiated by one of the
speakers. One of these
sessions is always discarded
before it leaves OpenWait state.
However, before it is discarded,
two sessions to the given peer
appear transiently in this MIB
module. The sessions are
distinguished by who initiated
them, and so this field is the
key.";
}
leaf state-last-change {
type yang:timestamp;
description
"The timestamp value at the
time this session entered its
current state as denoted by
the state leaf.";
}
leaf state {
type pcep-sess-state;
description
"The current state of the
session.
The set of possible states
excludes the idle state since
entries do not exist in the
idle state.";
}
leaf session-creation {
type yang:timestamp;
description
"The timestamp value at the
time this session was
created.";
}
leaf connect-retry {
type yang:counter32;
description
"The number of times that the
local PCEP entity has
attempted to establish a TCP
connection for this session
without success. The PCEP
entity gives up when this
reaches connect-max-retry.";
}
leaf local-id {
type uint32 {
range "0..255";
}
description
"The value of the PCEP session
ID used by the local PCEP
entity in the Open message
for this session.
If state is tcp-pending then
this is the session ID that
will be used in the Open
message. Otherwise, this is
the session ID that was sent
in the Open message.";
}
leaf remote-id {
type uint32 {
range "0..255";
}
must "((../state != 'tcp-pending'" +
"and " +
"../state != 'open-wait' )" +
"or " +
"((../state = 'tcp-pending'" +
" or " +
"../state = 'open-wait' )" +
"and remote-id = 0))" {
error-message
"Invalid remote-id";
description
"If state is tcp-pending
or open-wait then this
leaf is not used and
MUST be set to zero.";
}
description
"The value of the PCEP session
ID used by the peer in its
Open message for this
session.";
}
leaf keepalive-timer {
type uint32 {
range "0..255";
}
units "seconds";
must "(../state = 'session-up'" +
"or " +
"(../state != 'session-up'" +
"and keepalive-timer = 0))" {
error-message
"Invalid keepalive
timer";
description
"This field is used if
and only if state is
session-up. Otherwise,
it is not used and
MUST be set to
zero.";
}
description
"The agreed maximum interval at
which the local PCEP entity
transmits PCEP messages on this
PCEP session. Zero means that
the local PCEP entity never
sends Keepalives on this
session.";
}
leaf peer-keepalive-timer {
type uint32 {
range "0..255";
}
units "seconds";
must "(../state = 'session-up'" +
"or " +
"(../state != 'session-up'" +
"and " +
"peer-keepalive-timer = 0))" {
error-message
"Invalid Peer keepalive
timer";
description
"This field is used if
and only if state is
session-up. Otherwise,
it is not used and MUST
be set to zero.";
}
description
"The agreed maximum interval at
which the peer transmits PCEP
messages on this PCEP session.
Zero means that the peer never
sends Keepalives on this
session.";
}
leaf dead-timer {
type uint32 {
range "0..255";
}
units "seconds";
description
"The dead timer interval for
this PCEP session.";
}
leaf peer-dead-timer {
type uint32 {
range "0..255";
}
units "seconds";
must "((../state != 'tcp-pending'" +
"and " +
"../state != 'open-wait' )" +
"or " +
"((../state = 'tcp-pending'" +
" or " +
"../state = 'open-wait' )" +
"and " +
"peer-dead-timer = 0))" {
error-message
"Invalid Peer Dead
timer";
description
"If state is tcp-
pending or open-wait
then this leaf is not
used and MUST be set to
zero.";
}
description
"The peer's dead-timer interval
for this PCEP session.";
}
leaf ka-hold-time-rem {
type uint32 {
range "0..255";
}
units "seconds";
must "((../state != 'tcp-pending'" +
"and " +
"../state != 'open-wait' ) " +
"or " +
"((../state = 'tcp-pending'" +
"or " +
"../state = 'open-wait' )" +
"and " +
"ka-hold-time-rem = 0))" {
error-message
"Invalid Keepalive hold
time remaining";
description
"If state is tcp-pending
or open-wait then this
field is not used and
MUST be set to zero.";
}
description
"The keep alive hold time
remaining for this session.";
}
leaf overloaded {
type boolean;
description
"If the local PCEP entity has
informed the peer that it is
currently overloaded, then this
is set to true. Otherwise, it
is set to false.";
}
leaf overload-time {
type uint32;
units "seconds";
must "(../overloaded = true or" +
"(../overloaded != true and" +
" overload-time = 0))" {
error-message
"Invalid overload-time";
description
"This field is only used
if overloaded is set to
true. Otherwise, it is
not used and MUST be set
to zero.";
}
description
"The interval of time that is
remaining until the local PCEP
entity will cease to be
overloaded on this session.";
}
leaf peer-overloaded {
type boolean;
description
"If the peer has informed the
local PCEP entity that it is
currently overloaded, then this
is set to true. Otherwise, it
is set to false.";
}
leaf peer-overload-time {
type uint32;
units "seconds";
must "(../peer-overloaded = true" +
" or " +
"(../peer-overloaded != true" +
" and " +
"peer-overload-time = 0))" {
error-message
"Invalid peer overload
time";
description
"This field is only used
if peer-overloaded is
set to true. Otherwise,
it is not used and MUST
be set to zero.";
}
description
"The interval of time that is
remaining until the peer will
cease to be overloaded. If it
is not known how long the peer
will stay in overloaded state,
this leaf is set to zero.";
}
leaf lspdb-sync {
if-feature stateful;
type sync-state;
description
"The LSP-DB state synchronization
status.";
}
leaf discontinuity-time {
type yang:timestamp;
description
"The timestamp value of the time
when the statistics were last
reset.";
}
container pcep-stats {
description
"The container for all statistics
at session level.";
uses pcep-stats{
description
"The statistics contained are
for the current sessions to
that peer. These are lost
when the session goes down.
";
}
}//pcep-stats
} // session
} // sessions
}//peer
}//peers
}//entity
}//pcep-state
/*
* Notifications
*/
notification pcep-session-up {
description
"This notification is sent when the value of
'/pcep/pcep-state/peers/peer/sessions/session/state'
enters the 'session-up' state.";
uses notification-instance-hdr;
uses notification-session-hdr;
leaf state-last-change {
type yang:timestamp;
description
"The timestamp value at the time this session entered
its current state as denoted by the state leaf.";
}
leaf state {
type pcep-sess-state;
description
"The current state of the session.
The set of possible states excludes the idle state
since entries do not exist in the idle state.";
}
} //notification
notification pcep-session-down {
description
"This notification is sent when the value of
'/pcep/pcep-state/peers/peer/sessions/session/state'
leaves the 'session-up' state.";
uses notification-instance-hdr;
leaf session-initiator {
type pcep-initiator;
description
"The initiator of the session.";
}
leaf state-last-change {
type yang:timestamp;
description
"The timestamp value at the time this session entered
its current state as denoted by the state leaf.";
}
leaf state {
type pcep-sess-state;
description
"The current state of the session.
The set of possible states excludes the idle state
since entries do not exist in the idle state.";
}
} //notification
notification pcep-session-local-overload {
description
"This notification is sent when the local PCEP entity
enters overload state for a peer.";
uses notification-instance-hdr;
uses notification-session-hdr;
leaf overloaded {
type boolean;
description
"If the local PCEP entity has informed the peer that
it is currently overloaded, then this is set to
true. Otherwise, it is set to false.";
}
leaf overload-time {
type uint32;
units "seconds";
must "(../overloaded = true or " +
"(../overloaded != true and " +
"overload-time = 0))" {
error-message
"Invalid overload-time";
description
"This field is only used if overloaded is
set to true. Otherwise, it is not used
and MUST be set to zero.";
}
description
"The interval of time that is remaining until the
local PCEP entity will cease to be overloaded on
this session.";
}
} //notification
notification pcep-session-local-overload-clear {
description
"This notification is sent when the local PCEP entity
leaves overload state for a peer.";
uses notification-instance-hdr;
leaf overloaded {
type boolean;
description
"If the local PCEP entity has informed the peer
that it is currently overloaded, then this is set
to true. Otherwise, it is set to false.";
}
} //notification
notification pcep-session-peer-overload {
description
"This notification is sent when a peer enters overload
state.";
uses notification-instance-hdr;
uses notification-session-hdr;
leaf peer-overloaded {
type boolean;
description
"If the peer has informed the local PCEP entity that
it is currently overloaded, then this is set to true.
Otherwise, it is set to false.";
}
leaf peer-overload-time {
type uint32;
units "seconds";
must "(../peer-overloaded = true or " +
"(../peer-overloaded != true and " +
"peer-overload-time = 0))" {
error-message
"Invalid peer-overload-time";
description
"This field is only used if
peer-overloaded is set to true.
Otherwise, it is not used and MUST
be set to zero.";
}
description
"The interval of time that is remaining until the
peer will cease to be overloaded. If it is not known
how long the peer will stay in overloaded state, this
leaf is set to zero.";
}
} //notification
notification pcep-session-peer-overload-clear {
description
"This notification is sent when a peer leaves overload
state.";
uses notification-instance-hdr;
leaf peer-overloaded {
type boolean;
description
"If the peer has informed the local PCEP entity that
it is currently overloaded, then this is set to true.
Otherwise, it is set to false.";
}
} //notification
}//module
<CODE ENDS>
The YANG module defined in this memo is designed to be accessed via the NETCONF protocol [RFC6241]. The lowest NETCONF layer is the secure transport layer and the mandatory-to-implement secure transport is SSH [RFC6242]. The NETCONF access control model [RFC6536] provides the means to restrict access for particular NETCONF users to a pre-configured subset of all available NETCONF protocol operations and content.
There are a number of data nodes defined in the YANG module which are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., <edit-config>) to these data nodes without proper protection can have a negative effect on network operations.
TBD: List specific Subtrees and data nodes and their sensitivity/ vulnerability.
This document registers a URI in the "IETF XML Registry" [RFC3688]. Following the format in RFC 3688, the following registration has been made.
Name: ietf-pcep
Namespace: urn:ietf:params:xml:ns:yang:ietf-pcep
Prefix: pcep
Reference: This I-D
This document registers a YANG module in the "YANG Module Names" registry [RFC6020].
The initial document is based on the PCEP MIB [RFC7420]. Further this document structure is based on Routing Yang Module [I-D.ietf-netmod-routing-cfg]. We would like to thank the authors of aforementioned documents.
| [RFC2119] | Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997. |
| [RFC3688] | Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004. |
| [RFC5440] | Vasseur, JP. and JL. Le Roux, "Path Computation Element (PCE) Communication Protocol (PCEP)", RFC 5440, DOI 10.17487/RFC5440, March 2009. |
| [RFC6020] | Bjorklund, M., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, October 2010. |
| [RFC6991] | Schoenwaelder, J., "Common YANG Data Types", RFC 6991, DOI 10.17487/RFC6991, July 2013. |
| [I-D.ietf-pce-stateful-pce] | Crabbe, E., Minei, I., Medved, J. and R. Varga, "PCEP Extensions for Stateful PCE", Internet-Draft draft-ietf-pce-stateful-pce-16, September 2016. |
| [I-D.ietf-pce-pce-initiated-lsp] | Crabbe, E., Minei, I., Sivabalan, S. and R. Varga, "PCEP Extensions for PCE-initiated LSP Setup in a Stateful PCE Model", Internet-Draft draft-ietf-pce-pce-initiated-lsp-07, July 2016. |
| [I-D.ietf-pce-lsp-setup-type] | Sivabalan, S., Medved, J., Minei, I., Crabbe, E., Varga, R., Tantsura, J. and J. Hardwick, "Conveying path setup type in PCEP messages", Internet-Draft draft-ietf-pce-lsp-setup-type-03, June 2015. |
| [I-D.ietf-pce-segment-routing] | Sivabalan, S., Medved, J., Filsfils, C., Crabbe, E., Lopez, V., Tantsura, J., Henderickx, W. and J. Hardwick, "PCEP Extensions for Segment Routing", Internet-Draft draft-ietf-pce-segment-routing-07, March 2016. |
Rohit Pobbathi
Huawei Technologies
Divyashree Techno Park, Whitefield
Bangalore, Karnataka 560066
India
EMail: rohit.pobbathi@huawei.com
Vinod KumarS
Huawei Technologies
Divyashree Techno Park, Whitefield
Bangalore, Karnataka 560066
India
EMail: vinods.kumar@huawei.com
Zafar Ali
Cisco Systems
Canada
EMail: zali@cisco.com
Xufeng Liu
Ericsson
1595 Spring Hill Road, Suite 500
Vienna, VA 22182
USA
EMail: xufeng.liu@ericsson.com
Young Lee
Huawei Technologies
5340 Legacy Drive, Building 3
Plano, TX 75023, USA
Phone: (469) 277-5838
EMail: leeyoung@huawei.com
Udayasree Palle
Huawei Technologies
Divyashree Techno Park, Whitefield
Bangalore, Karnataka 560066
India
EMail: udayasree.palle@huawei.com
Xian Zhang
Huawei Technologies
Bantian, Longgang District
Shenzhen 518129
P.R.China
EMail: zhang.xian@huawei.com
Avantika
Huawei Technologies
Divyashree Techno Park, Whitefield
Bangalore, Karnataka 560066
India
EMail: avantika.sushilkumar@huawei.com