| Network Working Group | B. Decraene |
| Internet-Draft | Orange |
| Intended status: Standards Track | S. Litkowski |
| Expires: June 19, 2016 | Orange Business Service |
| H. Gredler | |
| Private Contributor | |
| A. Lindem | |
| P. Francois | |
| Cisco Systems | |
| December 17, 2015 |
SPF Back-off algorithm for link state IGPs
draft-ietf-rtgwg-backoff-algo-02
This document defines a standard algorithm to back-off link-state IGP SPF computations.
Having one standard algorithm improves interoperability by reducing the probability and/or duration of transient forwarding loops during the IGP convergence when the IGP reacts to multiple proximate IGP events.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on June 19, 2016.
Copyright (c) 2015 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Link state IGPs, such as IS-IS [ISO10589-Second-Edition] and OSPF [RFC2328], perform distributed route computation on all routers of the area/level. In order to have consistent routing tables across the network, such distributed computation requires that all routers have the same version of the network topology (Link State DataBase (LSDB)) and perform their computation at the same time.
In general, when the network is stable, there is a desire to compute the new SPF as soon as the failure is detected in order to quickly route around the failure. However, when the network is experiencing multiple proximate failures over a short period of time, there is a conflicting desire to limit the frequency of SPF computations. Indeed, this allows a reduction in control plane resources used by IGPs and all protocols/subsystem reacting on the attendant route change, such as LDP, RSVP-TE, BGP, Fast ReRoute computations, FIB updates... This will reduce the churn on routers and in the network and, in particular, reduce the side effects such as micro-loops that ensue during IGP convergence.
To allow for this, IGPs implement a SPF back-off algorithm. Different implementations choose different algorithms. Hence, in a multi-vendor network, it's not possible to ensure that all routers trigger their SPF computation after the same delay. This situation increases the average differential delay between routers completing their SPF computation. It also increases the probability that different routers compute their FIBs based on a different LSDB versions. Both factors increase the probability and/or duration of micro-loops.
To allow multi-vendor networks to have all routers delay their SPF computations for the same duration, this document specifies a standard algorithm. Optionally, implementations may offer alternative algorithms.
The high level goals of this algorithm are the following:
IGP events: An IGP LSDB change requiring a new routing table computation. Examples are a topology change, a prefix change, a metric change on link or prefix...
Routing table computation: computation of the routing table, by the IGP, using the IGP LSDB. No distinction is made between the type of computation performed. e.g., full SPF, incremental SPF, Partial Route Computation (PRC). The type of computation is a local consideration. This document may indifferently use the terms routing table computation or SPF computation.
The SPF_DELAY is the delay introduced between the IGP event and the start of the routing table computation. It can take the following values:
The TIME_TO_LEARN timer is the maximum duration typically needed to learn all the IGP events related to a single component failure (e.g., router failure, SRLG failure), e.g., 1 second. It's mostly dependent on variation of failure detection times between all routers that are adjacent to the failure. Additionally, it may depend on the different flooding implementations for routers in the network.
The HOLD_DOWN timer is the time needed with no received IGP events before considering the IGP to be stable again, allowing the SPF_DELAY to be restored to INITIAL_WAIT. e.g., 3 seconds.
For this first IGP event, we assume that there has been a single simple change in the network which can be taken into account using a single routing computation (e.g., link failure, prefix (metric) change) and we optimize for very fast convergence, delaying the routing computation by INITIAL_WAIT. Under this assumption, there is no benefit in delaying the routing computation. In a typical network, this is the most common type of IGP event. Hence, it makes sense to optimize this case.
If subsequent IGP events are received in a short period of time (TIME_TO_LEARN), we then assume that a single component failed, but that this failure requires the knowledge of multiple IGP events in order for the IGP routing to converge. Under this assumption, we want fast convergence since this is a normal network situation. However, there is a benefit in waiting for all IGP events related to this single component failure so that the IGP can compute the post-failure routing table in a single route computation. In this situation, we delay the routing computation by FAST_WAIT.
If IGP events are still received after TIME_TO_LEARN seconds from the initial IGP event, then the network is presumably experiencing multiple independent failures and while waiting for network stability, the computations are delayed for a longer time represented by LONG_WAIT. This SPF_delay is kept until no IGP events are received for HOLD_DOWN seconds.
Note: previous SPF delay algorithms used to count the number of SPF computations. However, as all routers may receive the IGP events at different times, we cannot assume that all routers will perform the same number of SPF computations or that they will schedule them at the same time. For example, assuming that the SPF delay is 50 ms, router R1 may receive 3 IGP events (E1, E2, E3) in those 50 ms and hence will perform a single routing computation. While another router R2 may only receive 2 events (E1, E2) in those 50 ms and hence will schedule another routing computation when receiving E3. That's why this document defines a time (TIME_TO_LEARN) from the initial event detection/reception as opposed to defining the number of SPF computations to determine when the IGP is unstable.
When no IGP events have occurred during the HOLD_DOWN interval:
When the IGP is in the QUIET state and an IGP event is received:
When the IGP is in the FAST_WAIT state and an IGP event is received:
When the IGP is in the HOLD_DOWN state and an IGP event is received:
All the parameters MUST be configurable. All the delays (INITIAL_WAIT, FAST_WAIT, LONG_WAIT, TIME_TO_LEARN, HOLD_DOWN) SHOULD be configurable at the millisecond granularity. They MUST be configurable at least at the tenth of second granularity. The configurable range for all the parameters SHOULD be at least from 0 milliseconds to 60 seconds.
This document does not propose default values for the parameters because these values are expected to be context dependent. Implementations are free to propose their own default values.
When setting the (default) values, one SHOULD consider the customer's or their applications' requirements, the computational power of the routers, the size of the network, and, in particular, the number of IP prefixes advertised in the IGP, the frequency and number of IGP events, the number of protocols reactions/computations triggered by IGP SPF (e.g., BGP, PCEP, Traffic Engineering CSPF, Fast ReRoute computations).
Note that some or all of these factors may change over the life of the network. In case of doubt, it's RECOMMENDED to play it safe and start with safe, i.e., longer timers.
For the standard algorithm to be effective in mitigating micro-loops, it is RECOMMENDED that all routers in the IGP domain, or at least all the routers in the same area/level, have exactly the same configured values.
Micro-loops during IGP convergence are due to a non-synchronized or non-ordered update of the forwarding information tables (FIB) [RFC5715] [RFC6976] [I-D.ietf-rtgwg-spf-uloop-pb-statement]. FIBs are installed after multiple steps such as SPF wait time, SPF computation, FIB distribution, and FIB update. This document only addresses the first contribution. This standardized procedure reduces the probability and/or duration of micro-loops when the IGP experience multiple proximate events. It does not prevent all micro-loops. However, it is beneficial and its cost seems limited compared to full solutions such as [RFC5715] or [RFC6976].
No IANA actions required.
This algorithm presented in this document does not in any way compromise the security of the IGP. In fact, the HOLD_DOWN state may mitigate the effects of Denial-of-Service (DOS) attacks generating many IGP events.
We would like to acknowledge Les Ginsberg, Uma Chunduri, and Mike Shand for the discussions and comments related to this document.
| [RFC2119] | Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997. |