A Manifest Information Model for Firmware Updates in IoT Devices

3.4.1. Example 1: Different Classes

Vendor A creates product Z and product Y. The firmware images of products Z and Y are not interchangeable. Vendor A creates UUIDs as follows:¶

• vendorId = UUID5(DNS, "vendor-a.com")¶
• ZclassId = UUID5(vendorId, "Product Z")¶
• YclassId = UUID5(vendorId, "Product Y")¶

This ensures that Vendor A's Product Z cannot install firmware for Product Y and Product Y cannot install firmware for Product Z.¶

3.4.2. Example 2: Upgrading Class ID

Vendor A creates product X. Later, Vendor A adds a new feature to product X, creating product X v2. Product X requires a firmware update to work with firmware intended for product X v2.¶

Vendor A creates UUIDs as follows:¶

• vendorId = UUID5(DNS, "vendor-a.com")¶
• XclassId = UUID5(vendorId, "Product X")¶
• Xv2classId = UUID5(vendorId, "Product X v2")¶

When product X receives the firmware update necessary to be compatible with product X v2, part of the firmware update changes the class ID to Xv2classId.¶

3.4.3. Example 3: Shared Functionality

Vendor A produces two products, product X and product Y. These components share a common core (such as an operating system), but have different applications. The common core and the applications can be updated independently. To enable X and Y to receive the same common core update, they require the same class ID. To ensure that only product X receives application X and only product Y receives application Y, product X and product Y must have different class IDs. The vendor creates Class IDs as follows:¶

• vendorId = UUID5(DNS, "vendor-a.com")¶
• XclassId = UUID5(vendorId, "Product X")¶
• YclassId = UUID5(vendorId, "Product Y")¶
• CommonClassId = UUID5(vendorId, "common core")¶

Product X matches against both XclassId and CommonClassId. Product Y matches against both YclassId and CommonClassId.¶

3.4.4. Example 4: White-labelling

Vendor A creates a product A and its firmware. Vendor B sells the product under its own name as Product B with some customised configuration. The vendors create the Class IDs as follows:¶

• vendorIdA = UUID5(DNS, "vendor-a.com")¶
• classIdA = UUID5(vendorIdA, "Product A-Unlabelled")¶
• vendorIdB = UUID5(DNS, "vendor-b.com")¶
• classIdB = UUID5(vendorIdB, "Product B")¶

The product will match against each of these class IDs. If Vendor A and Vendor B provide different components for the device, the implementor may choose to make ID matching scoped to each component. Then, the vendorIdA, classIdA match the component ID supplied by Vendor A, and the vendorIdB, classIdB match the component ID supplied by Vendor B.¶

3.10.1. Example 1: Two Storage Locations

A device supports two components: an OS and an application. These components can be updated independently, expressing dependencies to ensure compatibility between the components. The Author chooses two storage identifiers:¶

• "OS"¶
• "APP"¶

3.10.2. Example 2: File System

A device supports a full-featured filesystem. The Author chooses to use the storage identifier as the path at which to install the payload. The payload may be a tarball, in which case, it unpacks the tarball into the specified path.¶

3.10.3. Example 3: Flash Memory

A device supports flash memory. The Author chooses to make the storage identifier the offset where the image should be written.¶

4.2.1. THREAT.IMG.EXPIRED: Old Firmware

Classification: Elevation of Privilege¶

An attacker sends an old, but valid manifest with an old, but valid firmware image to a device. If there is a known vulnerability in the provided firmware image, this may allow an attacker to exploit the vulnerability and gain control of the device.¶

Threat Escalation: If the attacker is able to exploit the known vulnerability, then this threat can be escalated to ALL TYPES.¶

Mitigated by: REQ.SEC.SEQUENCE (Section 4.3.1)¶

4.2.2. THREAT.IMG.EXPIRED.OFFLINE : Offline device + Old Firmware

Classification: Elevation of Privilege¶

An attacker targets a device that has been offline for a long time and runs an old firmware version. The attacker sends an old, but valid manifest to a device with an old, but valid firmware image. The attacker-provided firmware is newer than the installed one but older than the most recently available firmware. If there is a known vulnerability in the provided firmware image then this may allow an attacker to gain control of a device. Because the device has been offline for a long time, it is unaware of any new updates. As such it will treat the old manifest as the most current.¶

The exact mitigation for this threat depends on where the threat comes from. This requires careful consideration by the implementor. If the threat is from a network actor, including an on-path attacker, or an intruder into a management system, then a user confirmation can mitigate this attack, simply by displaying an expiration date and requesting confirmation. On the other hand, if the user is the attacker, then an online confirmation system (for example a trusted timestamp server) can be used as a mitigation system.¶

Threat Escalation: If the attacker is able to exploit the known vulnerability, then this threat can be escalated to ALL TYPES.¶

Mitigated by: REQ.SEC.EXP (Section 4.3.3), REQ.USE.MFST.PRE_CHECK (Section 4.5.1),¶

4.2.3. THREAT.IMG.INCOMPATIBLE: Mismatched Firmware

Classification: Denial of Service¶

An attacker sends a valid firmware image, for the wrong type of device, signed by an actor with firmware installation permission on both types of device. The firmware is verified by the device positively because it is signed by an actor with the appropriate permission. This could have wide-ranging consequences. For devices that are similar, it could cause minor breakage, or expose security vulnerabilities. For devices that are very different, it is likely to render devices inoperable.¶

Mitigated by: REQ.SEC.COMPATIBLE (Section 4.3.2)¶

For example, suppose that two vendors, Vendor A and Vendor B, adopt the same trade name in different geographic regions, and they both make products with the same names, or product name matching is not used. This causes firmware from Vendor A to match devices from Vendor B.¶

If the vendors are the firmware authorities, then devices from Vendor A will reject images signed by Vendor B since they use different credentials. However, if both devices trust the same Author, then, devices from Vendor A could install firmware intended for devices from Vendor B.¶

4.2.4. THREAT.IMG.FORMAT: The target device misinterprets the type of payload

Classification: Denial of Service¶

If a device misinterprets the format of the firmware image, it may cause a device to install a firmware image incorrectly. An incorrectly installed firmware image would likely cause the device to stop functioning.¶

Threat Escalation: An attacker that can cause a device to misinterpret the received firmware image may gain elevation of privilege and potentially expand this to all types of threat.¶

Mitigated by: REQ.SEC.AUTH.IMG_TYPE (Section 4.3.5)¶

4.2.5. THREAT.IMG.LOCATION: The target device installs the payload to the wrong location

Classification: Denial of Service¶

If a device installs a firmware image to the wrong location on the device, then it is likely to break. For example, a firmware image installed as an application could cause a device and/or an application to stop functioning.¶

Threat Escalation: An attacker that can cause a device to misinterpret the received code may gain elevation of privilege and potentially expand this to all types of threat.¶

Mitigated by: REQ.SEC.AUTH.IMG_LOC (Section 4.3.6)¶

4.2.6. THREAT.NET.REDIRECT: Redirection to inauthentic payload hosting

Classification: Denial of Service¶

If a device is tricked into fetching a payload for an attacker controlled site, the attacker may send corrupted payloads to devices.¶

Mitigated by: REQ.SEC.AUTH.REMOTE_LOC (Section 4.3.7)¶

4.2.7. THREAT.NET.ONPATH: Traffic interception

Classification: Spoofing Identity, Tampering with Data¶

An attacker intercepts all traffic to and from a device. The attacker can monitor or modify any data sent to or received from the device. This can take the form of: manifests, payloads, status reports, and capability reports being modified or not delivered to the intended recipient. It can also take the form of analysis of data sent to or from the device, either in content, size, or frequency.¶

Mitigated by: REQ.SEC.AUTHENTIC (Section 4.3.4), REQ.SEC.IMG.CONFIDENTIALITY (Section 4.3.12), REQ.SEC.AUTH.REMOTE_LOC (Section 4.3.7), REQ.SEC.MFST.CONFIDENTIALITY (Section 4.3.14), REQ.SEC.REPORTING (Section 4.3.16)¶

4.2.8. THREAT.IMG.REPLACE: Payload Replacement

Classification: Elevation of Privilege¶

An attacker replaces a newly downloaded firmware after a device finishes verifying a manifest. This could cause the device to execute the attacker's code. This attack likely requires physical access to the device. However, it is possible that this attack is carried out in combination with another threat that allows remote execution. This is a typical Time Of Check/Time Of Use (TICTOC) attack.¶

Threat Escalation: If the attacker is able to exploit a known vulnerability, or if the attacker can supply their own firmware, then this threat can be escalated to ALL TYPES.¶

Mitigated by: REQ.SEC.AUTH.EXEC (Section 4.3.8)¶

4.2.9. THREAT.IMG.NON_AUTH: Unauthenticated Images

Classification: Elevation of Privilege / All Types¶

If an attacker can install their firmware on a device, for example by manipulating either payload or metadata, then they have complete control of the device.¶

Mitigated by: REQ.SEC.AUTHENTIC (Section 4.3.4)¶

4.2.10. THREAT.UPD.WRONG_PRECURSOR: Unexpected Precursor images

Classification: Denial of Service / All Types¶

Modifications of payloads and metadata allow an attacker to introduce a number of denial of service attacks. Below are some examples.¶

An attacker sends a valid, current manifest to a device that has an unexpected precursor image. If a payload format requires a precursor image (for example, delta updates) and that precursor image is not available on the target device, it could cause the update to break.¶

An attacker that can cause a device to install a payload against the wrong precursor image could gain elevation of privilege and potentially expand this to all types of threat. However, it is unlikely that a valid differential update applied to an incorrect precursor would result in a functional, but vulnerable firmware.¶

Mitigated by: REQ.SEC.AUTH.PRECURSOR (Section 4.3.9)¶

4.2.11. THREAT.UPD.UNAPPROVED: Unapproved Firmware

Classification: Denial of Service, Elevation of Privilege¶

This threat can appear in several ways, however it is ultimately about ensuring that devices retain the behaviour required by their owner, or operator. The owner or operator of a device typically requires that the device maintain certain features, functions, capabilities, behaviours, or interoperability constraints (more generally, behaviour). If these requirements are broken, then a device will not fulfill its purpose. Therefore, if any party other than the device's owner or the owner's contracted Device Operator has the ability to modify device behaviour without approval, then this constitutes an elevation of privilege.¶

Similarly, a Network Operator may require that devices behave in a particular way in order to maintain the integrity of the network. If devices behaviour on a network can be modified without the approval of the Network Operator, then this constitutes an elevation of privilege with respect to the network.¶

For example, if the owner of a device has purchased that device because of features A, B, and C, and a firmware update is issued by the manufacturer, which removes feature A, then the device may not fulfill the owner's requirements any more. In certain circumstances, this can cause significantly greater threats. Suppose that feature A is used to implement a safety-critical system, whether the manufacturer intended this behaviour or not. When unapproved firmware is installed, the system may become unsafe.¶

In a second example, the owner or operator of a system of two or more interoperating devices needs to approve firmware for their system in order to ensure interoperability with other devices in the system. If the firmware is not qualified, the system as a whole may not work. Therefore, if a device installs firmware without the approval of the device owner or operator, this is a threat to devices or the system as a whole.¶

Similarly, the operator of a network may need to approve firmware for devices attached to the network in order to ensure favourable operating conditions within the network. If the firmware is not qualified, it may degrade the performance of the network. Therefore, if a device installs firmware without the approval of the Network Operator, this is a threat to the network itself.¶

Threat Escalation: If the firmware expects configuration that is present in devices deployed in Network A, but not in devices deployed in Network B, then the device may experience degraded security, leading to threats of All Types.¶

Mitigated by: REQ.SEC.RIGHTS (Section 4.3.11), REQ.SEC.ACCESS_CONTROL (Section 4.3.13)¶

4.2.12. THREAT.IMG.DISCLOSURE: Reverse Engineering Of Firmware Image for Vulnerability Analysis

Classification: All Types¶

An attacker wants to mount an attack on an IoT device. To prepare the attack he or she retrieves the provided firmware image and performs reverse engineering of the firmware image to analyze it for specific vulnerabilities.¶

Mitigated by: REQ.SEC.IMG.CONFIDENTIALITY (Section 4.3.12)¶

4.2.13. THREAT.MFST.OVERRIDE: Overriding Critical Manifest Elements

Classification: Elevation of Privilege¶

An authorized actor, but not the Author, uses an override mechanism (USER_STORY.OVERRIDE (Section 4.4.3)) to change an information element in a manifest signed by the Author. For example, if the authorized actor overrides the digest and URI of the payload, the actor can replace the entire payload with a payload of their choice.¶

Threat Escalation: By overriding elements such as payload installation instructions or firmware digest, this threat can be escalated to all types.¶

Mitigated by: REQ.SEC.ACCESS_CONTROL (Section 4.3.13)¶

4.2.14. THREAT.MFST.EXPOSURE: Confidential Manifest Element Exposure

Classification: Information Disclosure¶

A third party may be able to extract sensitive information from the manifest.¶

Mitigated by: REQ.SEC.MFST.CONFIDENTIALITY (Section 4.3.14)¶

4.2.15. THREAT.IMG.EXTRA: Extra data after image

Classification: All Types¶

If a third party modifies the image so that it contains extra code after a valid, authentic image, that third party can then use their own code in order to make better use of an existing vulnerability.¶

Mitigated by: REQ.SEC.IMG.COMPLETE_DIGEST (Section 4.3.15)¶

4.2.16. THREAT.KEY.EXPOSURE: Exposure of signing keys

Classification: All Types¶

If a third party obtains a key or even indirect access to a key, for example in an hardware security module (HSM), then they can perform the same actions as the legitimate owner of the key. If the key is trusted for firmware update, then the third party can perform firmware updates as though they were the legitimate owner of the key.¶

For example, if manifest signing is performed on a server connected to the internet, an attacker may compromise the server and then be able to sign manifests, even if the keys for manifest signing are held in an HSM that is accessed by the server.¶

Mitigated by: REQ.SEC.KEY.PROTECTION (Section 4.3.17)¶

4.2.17. THREAT.MFST.MODIFICATION: Modification of manifest or payload prior to signing

Classification: All Types¶

If an attacker can alter a manifest or payload before it is signed, they can perform all the same actions as the manifest author. This allows the attacker to deploy firmware updates to any devices that trust the manifest author. If an attacker can modify the code of a payload before the corresponding manifest is created, they can insert their own code. If an attacker can modify the manifest before it is signed, they can redirect the manifest to their own payload.¶

For example, the attacker deploys malware to the developer's computer or signing service that watches manifest creation activities and inserts code into any binary that is referenced by a manifest.¶

For example, the attacker deploys malware to the developer's computer or signing service that replaces the referenced binary (digest) and URI with the attacker's binary (digest) and URI.¶

Mitigated by: REQ.SEC.MFST.CHECK (Section 4.3.18), REQ.SEC.MFST.TRUSTED (Section 4.3.19)¶

4.2.18. THREAT.MFST.TOCTOU: Modification of manifest between authentication and use

Classification: All Types¶

If an attacker can modify a manifest after it is authenticated (Time Of Check) but before it is used (Time Of Use), then the attacker can place any content whatsoever in the manifest.¶

Mitigated by: REQ.SEC.MFST.CONST (Section 4.3.20)¶

4.3.1. REQ.SEC.SEQUENCE: Monotonic Sequence Numbers

Only an actor with firmware installation authority is permitted to decide when device firmware can be installed. To enforce this rule, manifests MUST contain monotonically increasing sequence numbers. Manifests may use UTC epoch timestamps to coordinate monotonically increasing sequence numbers across many actors in many locations. If UTC epoch timestamps are used, they must not be treated as times, they must be treated only as sequence numbers. Devices must reject manifests with sequence numbers smaller than any onboard sequence number, i.e. there is no sequence number roll over.¶

Note: This is not a firmware version field. It is a manifest sequence number. A firmware version may be rolled back by creating a new manifest for the old firmware version with a later sequence number.¶

Mitigates: THREAT.IMG.EXPIRED (Section 4.2.1)¶

Implemented by: Monotonic Sequence Number (Section 3.2)¶

4.3.2. REQ.SEC.COMPATIBLE: Vendor, Device-type Identifiers

Devices MUST only apply firmware that is intended for them. Devices must know that a given update applies to their vendor, model, hardware revision, and software revision. Human-readable identifiers are often error-prone in this regard, so unique identifiers should be used instead.¶

Mitigates: THREAT.IMG.INCOMPATIBLE (Section 4.2.3)¶

Implemented by: Vendor ID Condition (Section 3.3), Class ID Condition (Section 3.4)¶

4.3.3. REQ.SEC.EXP: Expiration Time

A firmware manifest MAY expire after a given time and devices may have a secure clock (local or remote). If a secure clock is provided and the Firmware manifest has an expiration timestamp, the device must reject the manifest if current time is later than the expiration time.¶

Special consideration is required for end-of-life in case device will not be updated again, for example if a business stops issuing updates for a device. The last valid firmware should not have an expiration time.¶

Mitigates: THREAT.IMG.EXPIRED.OFFLINE (Section 4.2.2)¶

Implemented by: Expiration Time (Section 3.7)¶

4.3.4. REQ.SEC.AUTHENTIC: Cryptographic Authenticity

The authenticity of an update MUST be demonstrable. Typically, this means that updates must be digitally signed. Because the manifest contains information about how to install the update, the manifest's authenticity must also be demonstrable. To reduce the overhead required for validation, the manifest contains the cryptographic digest of the firmware image, rather than a second digital signature. The authenticity of the manifest can be verified with a digital signature or Message Authentication Code. The authenticity of the firmware image is tied to the manifest by the use of a cryptographic digest of the firmware image.¶

Mitigates: THREAT.IMG.NON_AUTH (Section 4.2.9), THREAT.NET.ONPATH (Section 4.2.7)¶

Implemented by: Signature (Section 3.15), Payload Digest (Section 3.13)¶

4.3.5. REQ.SEC.AUTH.IMG_TYPE: Authenticated Payload Type

The type of payload MUST be authenticated. For example, the target must know whether the payload is XIP firmware, a loadable module, or configuration data.¶

Mitigates: THREAT.IMG.FORMAT (Section 4.2.4)¶

Implemented by: Payload Format (Section 3.8), Signature (Section 3.15)¶

4.3.6. Security Requirement REQ.SEC.AUTH.IMG_LOC: Authenticated Storage Location

The location on the target where the payload is to be stored MUST be authenticated.¶

Mitigates: THREAT.IMG.LOCATION (Section 4.2.5)¶

Implemented by: Storage Location (Section 3.10)¶

4.3.7. REQ.SEC.AUTH.REMOTE_LOC: Authenticated Remote Payload

The location where a target should find a payload MUST be authenticated. Remote resources need to receive an equal amount of cryptographic protection as the manifest itself, when dereferencing URIs. The security considerations of Uniform Resource Identifiers (URIs) are applicable [RFC3986].¶

Mitigates: THREAT.NET.REDIRECT (Section 4.2.6), THREAT.NET.ONPATH (Section 4.2.7)¶

Implemented by: Payload Indicator (Section 3.12)¶

4.3.8. REQ.SEC.AUTH.EXEC: Secure Execution

The target SHOULD verify firmware at time of boot. This requires authenticated payload size, and digest.¶

Mitigates: THREAT.IMG.REPLACE (Section 4.2.8)¶

Implemented by: Payload Digest (Section 3.13), Size (Section 3.14)¶

4.3.9. REQ.SEC.AUTH.PRECURSOR: Authenticated precursor images

If an update uses a differential compression method, it MUST specify the digest of the precursor image and that digest MUST be authenticated.¶

Mitigates: THREAT.UPD.WRONG_PRECURSOR (Section 4.2.10)¶

Implemented by: Precursor Image Digest (Section 3.5)¶

4.3.10. REQ.SEC.AUTH.COMPATIBILITY: Authenticated Vendor and Class IDs

The identifiers that specify firmware compatibility MUST be authenticated to ensure that only compatible firmware is installed on a target device.¶

Mitigates: THREAT.IMG.INCOMPATIBLE (Section 4.2.3)¶

Implemented By: Vendor ID Condition (Section 3.3), Class ID Condition (Section 3.4)¶

4.3.11. REQ.SEC.RIGHTS: Rights Require Authenticity

If a device grants different rights to different actors, exercising those rights MUST be accompanied by proof of those rights, in the form of proof of authenticity. Authenticity mechanisms, such as those required in REQ.SEC.AUTHENTIC (Section 4.3.4), can be used to prove authenticity.¶

For example, if a device has a policy that requires that firmware have both an Authorship right and a Qualification right and if that device grants Authorship and Qualification rights to different parties, such as a Device Operator and a Network Operator, respectively, then the firmware cannot be installed without proof of rights from both the Device Operator and the Network Operator.¶

Mitigates: THREAT.UPD.UNAPPROVED (Section 4.2.11)¶

Implemented by: Signature (Section 3.15)¶

4.3.12. REQ.SEC.IMG.CONFIDENTIALITY: Payload Encryption

The manifest information model MUST enable encrypted payloads. Encryption helps to prevent third parties, including attackers, from reading the content of the firmware image. This can protect against confidential information disclosures and discovery of vulnerabilities through reverse engineering. Therefore the manifest must convey the information required to allow an intended recipient to decrypt an encrypted payload.¶

Mitigates: THREAT.IMG.DISCLOSURE (Section 4.2.12), THREAT.NET.ONPATH (Section 4.2.7)¶

Implemented by: Encryption Wrapper (Section 3.19)¶

4.3.13. REQ.SEC.ACCESS_CONTROL: Access Control

If a device grants different rights to different actors, then an exercise of those rights MUST be validated against a list of rights for the actor. This typically takes the form of an Access Control List (ACL). ACLs are applied to two scenarios:¶

1. An ACL decides which elements of the manifest may be overridden and by which actors.¶
2. An ACL decides which component identifier/storage identifier pairs can be written by which actors.¶

Mitigates: THREAT.MFST.OVERRIDE (Section 4.2.13), THREAT.UPD.UNAPPROVED (Section 4.2.11)¶

Implemented by: Client-side code, not specified in manifest.¶

4.3.14. REQ.SEC.MFST.CONFIDENTIALITY: Encrypted Manifests

A manifest format MUST allow encryption of selected parts of the manifest or encryption of the entire manifest to prevent sensitive content of the firmware metadata to be leaked.¶

Mitigates: THREAT.MFST.EXPOSURE (Section 4.2.14), THREAT.NET.ONPATH (Section 4.2.7)¶

Implemented by: Manifest Encryption Wrapper / Transport Security¶

4.3.15. REQ.SEC.IMG.COMPLETE_DIGEST: Whole Image Digest

The digest SHOULD cover all available space in a fixed-size storage location. Variable-size storage locations MUST be restricted to exactly the size of deployed payload. This prevents any data from being distributed without being covered by the digest. For example, XIP microcontrollers typically have fixed-size storage. These devices should deploy a digest that covers the deployed firmware image, concatenated with the default erased value of any remaining space.¶

Mitigates: THREAT.IMG.EXTRA (Section 4.2.15)¶

Implemented by: Payload Digests (Section 3.13)¶

4.3.16. REQ.SEC.REPORTING: Secure Reporting

Status reports from the device to any remote system MUST be performed over an authenticated, confidential channel in order to prevent modification or spoofing of the reports.¶

Mitigates: THREAT.NET.ONPATH (Section 4.2.7)¶

4.3.17. REQ.SEC.KEY.PROTECTION: Protected storage of signing keys

Cryptographic keys for signing/authenticating manifests SHOULD be stored in a manner that is inaccessible to networked devices, for example in an HSM, or an air-gapped computer. This protects against an attacker obtaining the keys.¶

Keys SHOULD be stored in a way that limits the risk of a legitimate, but compromised, entity (such as a server or developer computer) issuing signing requests.¶

Mitigates: THREAT.KEY.EXPOSURE (Section 4.2.16)¶

4.3.18. REQ.SEC.MFST.CHECK: Validate manifests prior to deployment

Manifests SHOULD be verified prior to deployment. This reduces problems that may arise with devices installing firmware images that damage devices unintentionally.¶

Mitigates: THREAT.MFST.MODIFICATION (Section 4.2.17)¶

4.3.19. REQ.SEC.MFST.TRUSTED: Construct manifests in a trusted environment

For high risk deployments, such as large numbers of devices or critical function devices, manifests SHOULD be constructed in an environment that is protected from interference, such as an air-gapped computer. Note that a networked computer connected to an HSM does not fulfill this requirement (see THREAT.MFST.MODIFICATION (Section 4.2.17)).¶

Mitigates: THREAT.MFST.MODIFICATION (Section 4.2.17)¶

4.3.20. REQ.SEC.MFST.CONST: Manifest kept immutable between check and use

Both the manifest and any data extracted from it MUST be held immutable between its authenticity verification (time of check) and its use (time of use). To make this guarantee, the manifest MUST fit within an internal memory or a secure memory, such as encrypted memory. The recipient SHOULD defend the manifest from tampering by code or hardware resident in the recipient, for example other processes or debuggers.¶

If an application requires that the manifest is verified before storing it, then this means the manifest MUST fit in RAM.¶

Mitigates: THREAT.MFST.TOCTOU (Section 4.2.18)¶

4.4.1. USER_STORY.INSTALL.INSTRUCTIONS: Installation Instructions

As a Device Operator, I want to provide my devices with additional installation instructions so that I can keep process details out of my payload data.¶

Some installation instructions might be:¶

• Use a table of hashes to ensure that each block of the payload is validated before writing.¶
• Do not report progress.¶
• Pre-cache the update, but do not install.¶
• Install the pre-cached update matching this manifest.¶
• Install this update immediately, overriding any long-running tasks.¶

Satisfied by: REQ.USE.MFST.PRE_CHECK (Section 4.5.1)¶

4.4.2. USER_STORY.MFST.FAIL_EARLY: Fail Early

As a designer of a resource-constrained IoT device, I want bad updates to fail as early as possible to preserve battery life and limit consumed bandwidth.¶

Satisfied by: REQ.USE.MFST.PRE_CHECK (Section 4.5.1)¶

4.4.3. USER_STORY.OVERRIDE: Override Non-Critical Manifest Elements

As a Device Operator, I would like to be able to override the non-critical information in the manifest so that I can control my devices more precisely. The authority to override this information is provided via the installation of a limited trust anchor by another authority.¶

Some examples of potentially overridable information:¶

• URIs (Section 3.12): this allows the Device Operator to direct devices to their own infrastructure in order to reduce network load.¶
• Conditions: this allows the Device Operator to pose additional constraints on the installation of the manifest.¶
• Directives (Section 3.16): this allows the Device Operator to add more instructions such as time of installation.¶
• Processing Steps (Section 3.9): If an intermediary performs an action on behalf of a device, it may need to override the processing steps. It is still possible for a device to verify the final content and the result of any processing step that specifies a digest. Some processing steps should be non-overridable.¶

Satisfied by: REQ.USE.MFST.COMPONENT (Section 4.5.3)¶

4.4.4. USER_STORY.COMPONENT: Component Update

As a Device Operator, I want to divide my firmware into components, so that I can reduce the size of updates, make different parties responsible for different components, and divide my firmware into frequently updated and infrequently updated components.¶

Satisfied by: REQ.USE.MFST.COMPONENT (Section 4.5.3)¶

4.4.5. USER_STORY.MULTI_AUTH: Multiple Authorizations

As a Device Operator, I want to ensure the quality of a firmware update before installing it, so that I can ensure interoperability of all devices in my product family. I want to restrict the ability to make changes to my devices to require my express approval.¶

Satisfied by: REQ.USE.MFST.MULTI_AUTH (Section 4.5.4), REQ.SEC.ACCESS_CONTROL (Section 4.3.13)¶

4.4.6. USER_STORY.IMG.FORMAT: Multiple Payload Formats

As a Device Operator, I want to be able to send multiple payload formats to suit the needs of my update, so that I can optimise the bandwidth used by my devices.¶

Satisfied by: REQ.USE.IMG.FORMAT (Section 4.5.5)¶

4.4.7. USER_STORY.IMG.CONFIDENTIALITY: Prevent Confidential Information Disclosures

As a firmware author, I want to prevent confidential information in the manifest from being disclosed when distributing manifests and firmware images. Confidential information may include information about the device these updates are being applied to as well as information in the firmware image itself.¶

Satisfied by: REQ.SEC.IMG.CONFIDENTIALITY (Section 4.3.12)¶

4.4.8. USER_STORY.IMG.UNKNOWN_FORMAT: Prevent Devices from Unpacking Unknown Formats

As a Device Operator, I want devices to determine whether they can process a payload prior to downloading it.¶

In some cases, it may be desirable for a third party to perform some processing on behalf of a target. For this to occur, the third party MUST indicate what processing occurred and how to verify it against the Trust Provisioning Authority's intent.¶

This amounts to overriding Processing Steps (Section 3.9) and Payload Indicator (Section 3.12).¶

Satisfied by: REQ.USE.IMG.FORMAT (Section 4.5.5), REQ.USE.IMG.NESTED (Section 4.5.6), REQ.USE.MFST.OVERRIDE_REMOTE (Section 4.5.2)¶

4.4.9. USER_STORY.IMG.CURRENT_VERSION: Specify Version Numbers of Target Firmware

As a Device Operator, I want to be able to target devices for updates based on their current firmware version, so that I can control which versions are replaced with a single manifest.¶

Satisfied by: REQ.USE.IMG.VERSIONS (Section 4.5.7)¶

4.4.10. USER_STORY.IMG.SELECT: Enable Devices to Choose Between Images

As a developer, I want to be able to sign two or more versions of my firmware in a single manifest so that I can use a very simple bootloader that chooses between two or more images that are executed in-place.¶

Satisfied by: REQ.USE.IMG.SELECT (Section 4.5.8)¶

4.4.11. USER_STORY.EXEC.MFST: Secure Execution Using Manifests

As a signer for both secure execution/boot and firmware deployment, I would like to use the same signed document for both tasks so that my data size is smaller, I can share common code, and I can reduce signature verifications.¶

Satisfied by: REQ.USE.EXEC (Section 4.5.9)¶

4.4.12. USER_STORY.EXEC.DECOMPRESS: Decompress on Load

As a developer of firmware for a run-from-RAM device, I would like to use compressed images and to indicate to the bootloader that I am using a compressed image in the manifest so that it can be used with secure execution/boot.¶

Satisfied by: REQ.USE.LOAD (Section 4.5.10)¶

4.4.13. USER_STORY.MFST.IMG: Payload in Manifest

As an operator of devices on a constrained network, I would like the manifest to be able to include a small payload in the same packet so that I can reduce network traffic.¶

Small payloads may include, for example, wrapped content encryption keys, configuration information, public keys, authorization tokens, or X.509 certificates.¶

Satisfied by: REQ.USE.PAYLOAD (Section 4.5.11)¶

4.4.14. USER_STORY.MFST.PARSE: Simple Parsing

As a developer for constrained devices, I want a low complexity library for processing updates so that I can fit more application code on my device.¶

Satisfied by: REQ.USE.PARSE (Section 4.5.12)¶

4.4.15. USER_STORY.MFST.DELEGATION: Delegated Authority in Manifest

As a Device Operator that rotates delegated authority more often than delivering firmware updates, I would like to delegate a new authority when I deliver a firmware update so that I can accomplish both tasks in a single transmission.¶

Satisfied by: REQ.USE.DELEGATION (Section 4.5.13)¶

4.4.16. USER_STORY.MFST.PRE_CHECK: Update Evaluation

As an operator of a constrained network, I would like devices on my network to be able to evaluate the suitability of an update prior to initiating any large download so that I can prevent unnecessary consumption of bandwidth.¶

Satisfied by: REQ.USE.MFST.PRE_CHECK (Section 4.5.1)¶

4.5.1. REQ.USE.MFST.PRE_CHECK: Pre-Installation Checks

A manifest format MUST be able to carry all information required to process an update.¶

For example: Information about which precursor image is required for a differential update must be placed in the manifest.¶

Satisfies: [USER_STORY.MFST.PRE_CHECK(#user-story-mfst-pre-check), USER_STORY.INSTALL.INSTRUCTIONS (Section 4.4.1)¶

Implemented by: Additional installation instructions (Section 3.16)¶

4.5.2. REQ.USE.MFST.OVERRIDE_REMOTE: Override Remote Resource Location

A manifest format MUST be able to redirect payload fetches. This applies where two manifests are used in conjunction. For example, a Device Operator creates a manifest specifying a payload and signs it, and provides a URI for that payload. A Network Operator creates a second manifest, with a dependency on the first. They use this second manifest to override the URIs provided by the Device Operator, directing them into their own infrastructure instead. Some devices may provide this capability, while others may only look at canonical sources of firmware. For this to be possible, the device must fetch the payload, whereas a device that accepts payload pushes will ignore this feature.¶

Satisfies: USER_STORY.OVERRIDE (Section 4.4.3)¶

Implemented by: Aliases (Section 3.17)¶

4.5.3. REQ.USE.MFST.COMPONENT: Component Updates

A manifest format MUST be able to express the requirement to install one or more payloads from one or more authorities so that a multi-payload update can be described. This allows multiple parties with different permissions to collaborate in creating a single update for the IoT device, across multiple components.¶

This requirement implies that it must be possible to construct a tree of manifests on a multi-image target.¶

In order to enable devices with a heterogeneous storage architecture, the manifest must enable specification of both storage system and the storage location within that storage system.¶

Satisfies: USER_STORY.OVERRIDE (Section 4.4.3), USER_STORY.COMPONENT (Section 4.4.4)¶

Implemented by: Dependencies, StorageIdentifier, ComponentIdentifier¶

4.5.4. REQ.USE.MFST.MULTI_AUTH: Multiple authentications

A manifest format MUST be able to carry multiple signatures so that authorizations from multiple parties with different permissions can be required in order to authorize installation of a manifest.¶

Satisfies: USER_STORY.MULTI_AUTH (Section 4.4.5)¶

Implemented by: Signature (Section 3.15)¶

4.5.5. REQ.USE.IMG.FORMAT: Format Usability

The manifest format MUST accommodate any payload format that an Operator wishes to use. This enables the recipient to detect which format the Operator has chosen. Some examples of payload format are:¶

• Binary¶
• Executable and Linkable Format (ELF)¶
• Differential¶
• Compressed¶
• Packed configuration¶
• Intel HEX¶
• Motorola S-Record¶

Satisfies: USER_STORY.IMG.FORMAT (Section 4.4.6) USER_STORY.IMG.UNKNOWN_FORMAT (Section 4.4.8)¶

Implemented by: Payload Format (Section 3.8)¶

4.5.6. REQ.USE.IMG.NESTED: Nested Formats

The manifest format MUST accommodate nested formats, announcing to the target device all the nesting steps and any parameters used by those steps.¶

Satisfies: USER_STORY.IMG.CONFIDENTIALITY (Section 4.4.7)¶

Implemented by: Processing Steps (Section 3.9)¶

4.5.7. REQ.USE.IMG.VERSIONS: Target Version Matching

The manifest format MUST provide a method to specify multiple version numbers of firmware to which the manifest applies, either with a list or with range matching.¶

Satisfies: USER_STORY.IMG.CURRENT_VERSION (Section 4.4.9)¶

Implemented by: Required Image Version List (Section 3.6)¶

4.5.8. REQ.USE.IMG.SELECT: Select Image by Destination

The manifest format MUST provide a mechanism to list multiple equivalent payloads by Execute-In-Place Installation Address, including the payload digest and, optionally, payload URIs.¶

Satisfies: USER_STORY.IMG.SELECT (Section 4.4.10)¶

Implemented by: XIP Address (Section 3.20)¶

4.5.9. REQ.USE.EXEC: Executable Manifest

The manifest format MUST allow to describe an executable system with a manifest on both Execute-In-Place microcontrollers and on complex operating systems. In addition, the manifest format MUST be able to express metadata, such as a kernel command-line, used by any loader or bootloader.¶

Satisfies: USER_STORY.EXEC.MFST (Section 4.4.11)¶

Implemented by: Run-time metadata (Section 3.22)¶

4.5.10. REQ.USE.LOAD: Load-Time Information

The manifest format MUST enable carrying additional metadata for load time processing of a payload, such as cryptographic information, load-address, and compression algorithm. Note that load comes before execution/boot.¶

Satisfies: USER_STORY.EXEC.DECOMPRESS (Section 4.4.12)¶

Implemented by: Load-time metadata (Section 3.21)¶

4.5.11. REQ.USE.PAYLOAD: Payload in Manifest Envelope

The manifest format MUST allow placing a payload in the same structure as the manifest. This may place the payload in the same packet as the manifest.¶

Integrated payloads may include, for example, binaries as well as configuration information, and keying material.¶

When an integrated payload is provided, this increases the size of the manifest. Manifest size can cause several processing and storage concerns that require careful consideration. The payload can prevent the whole manifest from being contained in a single network packet, which can cause fragmentation and the loss of portions of the manifest in lossy networks. This causes the need for reassembly and retransmission logic. The manifest MUST be held immutable between verification and processing (see REQ.SEC.MFST.CONST (Section 4.3.20)), so a larger manifest will consume more memory with immutability guarantees, for example internal RAM or NVRAM, or external secure memory. If the manifest exceeds the available immutable memory, then it MUST be processed modularly, evaluating each of: delegation chains, the security container, and the actual manifest, which includes verifying the integrated payload. If the security model calls for downloading the manifest and validating it before storing to NVRAM in order to prevent wear to NVRAM and energy expenditure in NVRAM, then either increasing memory allocated to manifest storage or modular processing of the received manifest may be required. While the manifest has been organised to enable this type of processing, it creates additional complexity in the parser. If the manifest is stored in NVRAM prior to processing, the integrated payload may cause the manifest to exceed the available storage. Because the manifest is received prior to validation of applicability, authority, or correctness, integrated payloads cause the recipient to expend network bandwidth and energy that may not be required if the manifest is discarded and these costs vary with the size of the integrated payload.¶

See also: REQ.SEC.MFST.CONST (Section 4.3.20).¶

Satisfies: USER_STORY.MFST.IMG (Section 4.4.13)¶

Implemented by: Payload (Section 3.23)¶

4.5.12. REQ.USE.PARSE: Simple Parsing

The structure of the manifest MUST be simple to parse to reduce the attack vectors against manifest parsers.¶

Satisfies: USER_STORY.MFST.PARSE (Section 4.4.14)¶

Implemented by: N/A¶

4.5.13. REQ.USE.DELEGATION: Delegation of Authority in Manifest

A manifest format MUST enable the delivery of delegation information. This information delivers a new key with which the recipient can verify the manifest.¶

Satisfies: USER_STORY.MFST.DELEGATION (Section 4.4.15)¶

Implemented by: Delegation Chain (Section 3.24)¶