| Internet Engineering Task Force | Y. Sharma, Ed. |
| Internet-Draft | R. Kamath |
| Intended status: Standards Track | A. Inamdar |
| Expires: October 15, 2016 | Cisco Systems |
| April 13, 2016 |
Management Information Base for the Group Domain of Interpretation
draft-kamarthy-gdoi-mib-01
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols. In particular this document describes a high-level Management Information Base for Group Domain of Interpretation (GDOI), which is used for secure group communication in Ipsec-based networks. This draft describes managed objects used for implementations of the GDOI protocol.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on October 15, 2016.
Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
This memo defines the Management Information Base (MIB) for use with network management protocols. In particular it defines objects for managing the Group Domain of Interpretation (GDOI) protocol, defined by RFC3547[RFC3547] used for secure group communication.
For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of [RFC3410].
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].
To support the management needs of IPsec-based networks, we have defined the GDOI MIB (module GDOI-MIB). The MIB defines a number of objects with enumeration syntax which refer to the numbers assigned by IANA to denote specific elements. The SNMP Management Framework presently consists of five major components:
The GDOI MIB module defined in this draft is used to manage network devices running a group-based key management protocol based on the GDOI standard. The MIB module supports management of two network entities, group member and key server. A GDOI group spans multiple devices in the network, and this GDOI MIB module can be used to model all the network entities that make up the GDOI group.
This section provides a view of the overall architecture, and describes the major MIB groups and table definitions.
The following new textual conventions are introduced: GdoiKsStatus, GdoiKsRole, GdoiIdentificationType, GdoiIdentificationValue, GdoiKekSPI, GdoiIpProtocolId, GdoiKeyManagementAlgorithm, GdoiEncryptionAlgorithm, GdoiPseudoRandomFunction, GdoiIntegrityAlgorithm, GdoiSignatureMethod, GdoiDiffieHellmanGroup, GdoiEncapsulationMode, GdoiSecurityProtocol, GdoiTekSPI, GdoiKekStatus, GdoiTekStatus, GdoiUnsigned16.
The following figure shows the organization of the GDOI MIB module and the dependencies among various objects. The objects at the bottom of the figure depend on the objects above them. Figure 1 shows which object of the GDOI MIB will be available for query by a network manager if only the group member resides on a networks box. Figure 2 shows the object that can be queried by the SNMP manager if only the key server is available on a box. Finally, Figure 3 shows the scenario in which both a group member and a key server reside on a box, and the MIB objects that can be queried.
--------------
| GDOI Group |
--------------
|
|
|
--------------
| Local GM |
--------------
|
| |
| |
| |
------------ ------------
| KEK SA | | TEK SA |
------------ ------------
Figure 1: GDOI MIB objects that are used when a group member
is on a box
--------------
| GDOI Group |
--------------
|
|
|
--------------
| Local KS |
--------------
|
| |
| |
| |
------------ ------------
| KEK SA | | TEK SA |
------------ ------------
Figure 2: GDOI MIB objects that are used when a key server is
on a box
--------------
| GDOI Group |
--------------
|
| | |
| | |
| | |
| | |
-------------- -------------- --------------
| Local KS | | COOP Peer | | Local GM |
-------------- -------------- --------------
| |
| | | |
| | | |
| | | |
------------ ------------ ------------ ------------
| KEK SA | | TEK SA | | KEK SA | | TEK SA |
------------ ------------ ------------ ------------
Figure 3: GDOI MIB objects that are used when a key server and a group
member are on a box
The GDOI MIB module object definitions will be covered in Section 6.
Notifications are defined to inform the management station about changes that happen on the Group Member (GM) or the Key Server (KS). The gdoiKeyServerNotifs defines the KS notifications, which are sent when the following events happens on the KS:
The gdoiGmNotifs defines the GM notifications, which are sent after the occurrence of the following events:
The GDOI MIB module has the following tables:
This GDOI MIB module does not depend on any other MIB modules.
NA
The GDOI-STD-MIB module IMPORTS objects from SNMPv2-SMI [RFC2579], SNMPv2-TC [RFC2578], SNMPv2-CONF [RFC2580].
-- *********************************************************************
-- Copyright (c)2010-2011, 2010, 2015 by Cisco Systems Inc.
-- All rights reserved.
--
-- CISCO-GDOI-MIB: MIB for Group Domain of Interpretation (GDOI)
-- July 2010 - Preethi Sundaradevan, Manoj Vellala,
-- Mike Hamada, Tanya Roosta
-- February 2015 - Rohini Kamath, Yogesh Sharma
-- *********************************************************************
CISCO-GDOI-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
Counter32,
Unsigned32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
DisplayString,
TruthValue
FROM SNMPv2-TC
CiscoMilliSeconds
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
-- ------------------------------------------------------------------ --
-- GDOI MIB Module Identity
-- ------------------------------------------------------------------ --
ciscoGdoiMIB MODULE-IDENTITY
LAST-UPDATED "201507170000Z"
ORGANIZATION "cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Enterprise Business Management Unit
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-ipsecurity@cisco.com"
DESCRIPTION
"This MIB module defines objects for managing the GDOI protocol.
Copyright (c) The IETF Trust (2010). This version of this MIB
module is based on RFC 6407; see the RFC itself for full legal
notices."
REVISION "201507170000Z"
DESCRIPTION
"Added the following textual conventions:
- CgmGdoiKsStatus
- CgmGdoiKsRole
Added the following objects to cgmGdoiGroupTable:
- cgmGdoiGroupMemberCount
- cgmGdoiGroupActivePeerKeyServerCount
- cgmGdoiGroupLastRekeyRetransmits
- cgmGdoiGroupLastRekeyTimeTaken
Added the following objects to cgmGdoiKeyServerTable:
- cgmGdoiKeyServerRole
- cgmGdoiKeyServerRegisteredGMs
Added the following objects to cgmGdoiGmTable:
- cgmGdoiGmActiveTEKNum
Added the following objects to cgmGdoiNotifCntl:
- cgmGdoiKsRoleChangeNotifEnable
- cgmGdoiKsGmDeletedNotifEnable
- cgmGdoiKsPeerReachNotifEnable
- cgmGdoiKsPeerUnreachNotifEnable
Added the following tables:
- cgmGdoiNotifVars
- cgmGdoiCoopPeerTable
Added the following notifications:
- cgmGdoiKeyServerRoleChange
- cgmGdoiKeyServerGmDeleted
- cgmGdoiKeyServerPeerReachable
- cgmGdoiKeyServerPeerUnreachable
Added new MIB Groups (for conformance)
- cgmGdoiGroupIdGroupRev1
- cgmGdoiKeyServerGroupRev1
- cgmGdoiGmGroupRev1
- cgmGdoiNotificationControlGroupRev1
- cgmGdoiKeyServerNotificationGroupRev1
- cgmGdoiCoopPeerGroup
- cgmGdoiNotificationVariablesGroup
Added a new compliance group:
- cgmGdoiMIBComplianceRev1
Deprecated an old compliance group:
- cgmGdoiMIBCompliance"
REVISION "201008310000Z"
DESCRIPTION
"Final Ciscoized version of the MIB draft after review comments"
REVISION "201007201240Z"
DESCRIPTION
"Ciscoized version of the MIB draft after review comments"
REVISION "201006021245Z"
DESCRIPTION
"Ciscoized version of the initial MIB draft"
REVISION "201002250545Z"
DESCRIPTION
"Initial version, published as RFC ????"
::= { ciscoMgmt 759 }
-- ------------------------------------------------------------------ --
-- GDOI MIB Textual Conventions
-- ------------------------------------------------------------------ --
CgmGdoiKsStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention identifying the status of Key Server in
the COOP/Stand-alone scenario.
Following are the possible values:
ID Type Value
------- -----
Alive 1 -- Key Server is perceived as Alive
Dead 2 -- Key Server is perceived as Dead
Unknown 3 -- Failed to determine the status;
or, the status of a secondary
peer when seen from a Secondary
Key Server."
SYNTAX INTEGER {
keyServerAlive(1),
keyServerDead(2),
keyServerUnknown(3)
}
CgmGdoiKsRole ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention identifying the role of Key Server in the
COOP/Stand-alone scenario.
Following are the possible values:
ID Type Value
------- -----
Primary 1 -- Role is Primary
Secondary 2 -- Role is Secondary
Unknown 3 -- Failed to determine the role"
SYNTAX INTEGER {
keyServerPrimary(1),
keyServerSecondary(2),
keyServerUnknown(3)
}
CgmGdoiIdentificationType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the type of value used to
identify a GDOI entity (i.e. Group, Key Server, or Group
Member).
Following are the Identification Type Values:
ID Type Value
------- -----
RESERVED 0 -- Not Used
ID_IPV4_ADDR 1 -- ipv4Address
ID_FQDN 2 -- domainName
ID_RFC822_ADDR 3 -- userName
(ID_USER_FQDN)
ID_IPV4_ADDR_SUBNET 4 -- ipv4Subnet - Not in RFC 4306
ID_IPV6_ADDR 5 -- ipv6Address
ID_IPV6_ADDR_SUBNET 6 -- ipv6Subnet - Not in RFC 4306
ID_IPV4_ADDR_RANGE 7 -- ipv4Range - Not in RFC 4306
ID_IPV6_ADDR_RANGE 8 -- ipv6Range - Not in RFC 4306
ID_DER_ASN1_DN 9 -- caDistinguishedName
ID_DER_ASN1_GN 10 -- caGeneralName
ID_KEY_ID 11 -- groupNumber
Following are the mappings to the type values above:
'ipv4Address' : a single four (4) octet IPv4 address.
'domainName' : a fully-qualified domain name string. An
example is, 'example.com'. The string MUST not
contain any terminators (e.g., NULL, CR, etc.).
'userName' : a fully-qualified RFC 822 username or email
address string. An example is, 'jsmith@example.com'.
The string MUST not contain any terminators.
'ipv4Subnet' : a range of IPv4 addresses, represented by
two four (4) octet values concatenated together. The
first value is an IPv4 address. The second is an
IPv4 network mask. Note that ones (1s) in the network
mask indicate that the corresponding bit in the address
is fixed, while zeros (0s) indicate a 'wildcard' bit.
'ipv6Address' : a single sixteen (16) octet IPv6 address.
'ipv6Subnet' : a range of IPv6 addresses, represented by
two sixteen (16) octet values concatenated together.
The first value is an IPv6 address. The second is an
IPv network mask. Note that ones (1s) in the network
mask indicate that the corresponding bit in the address
is fixed, while zeros (0s) indicate a 'wildcard' bit.
'ipv4Range' : a range of IPv4 addresses, represented by
two four (4) octet values. The first value is the
beginning IPv4 address (inclusive) and the second
value is the ending IPv4 address (inclusive). All
addresses falling between the two specified addresses
are considered to be within the list.
'ipv6Range' : a range of IPv6 addresses, represented by
two sixteen (16) octet values. The first value is the
beginning IPv6 address (inclusive) and the second
value is the ending IPv6 address (inclusive). All
addresses falling between the two specified addresses
are considered to be within the list.
'caDistinguishedName' : the binary DER encoding of an ASN.1
X.500 Distinguished Name [X.501].
'caGeneralName' : the binary DER encoding of an ASN.1
X.500 GeneralName [X.509].
'groupNumber' : a four (4) octet group identifier."
REFERENCE
"IANA ISAKMP Registry - 'Magic Numbers' for ISAKMP Protocol
Section: IPSEC Identification Type
http://www.iana.org/assignments/isakmp-registry
RFC 4306 - Section: 3.5. Identification Payloads"
SYNTAX INTEGER {
ipv4Address(1),
domainName(2),
userName(3),
ipv4Subnet(4),
ipv6Address(5),
ipv6Subnet(6),
ipv4Range(7),
ipv6Range(8),
caDistinguishedName(9),
caGeneralName(10),
groupNumber(11)
}
CgmGdoiIdentificationValue ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255d"
STATUS current
DESCRIPTION
"A textual convention indicating the actual value of used to
identify a GDOI entity (i.e. Group, Key Server, or Group
Member). The value of the CgmGdoiIdentificationValue object can
be parsed based on the value of the associated
CgmGdoiIdentificationType object.
The following CgmGdoiIdentificationType values indicate that the
CgmGdoiIdentificationValue object should be parsed as a binary
string of octets with the given lengths if a length is not
associated with the object:
ipv4Address(1) -- 4 octets
ipv4Subnet(4) -- 8 octets
ipv6Address(5) -- 16 octets
ipv6Subnet(6) -- 32 octets
ipv4Range(7) -- 8 octets
ipv6Range(8) -- 32 octets
groupNumber(11) -- 4 octets
The following CgmGdoiIdentificationType values indicate that
the CgmGdoiIdentificationValue object should be parsed as an
ASCII string of characters. Note that a length MUST be
associated with the object in these cases:
domainName(2)
userName(3)
caDistinguishedName(9)
caGeneralName(10)
Note that the length of 48 octets was chosen because the
gdoiKsKekEntry, gdoiGmKekEntry, gdoiKsTekEntry, &
gdoiGmTekEntry will exceed the OID size limit of 255 octets
if this size is any larger than 48 octets."
REFERENCE
"IANA ISAKMP Registry - 'Magic Numbers' for ISAKMP Protocol
Section: IPSEC Identification Type
http://www.iana.org/assignments/isakmp-registry
RFC 4306 - Section: 3.5. Identification Payloads"
SYNTAX OCTET STRING (SIZE (0..48))
CgmGdoiKekSPI ::= TEXTUAL-CONVENTION
DISPLAY-HINT "16x"
STATUS current
DESCRIPTION
"A textual convention indicating a SPI (Security Parameter
Index) of sixteen (16) octets for a KEK. The SPI must be the
ISAKMP Header cookie pair where the first 8 octets become the
'Initiator Cookie' field of the GROUPKEY-PUSH message ISAKMP
HDR, and the second 8 octets become the 'Responder Cookie' in
the same HDR. These cookies are assigned by the Key Server."
REFERENCE "RFC 3547 - Section: 5.3. SA KEK Payload"
SYNTAX OCTET STRING (SIZE (16))
CgmGdoiIpProtocolId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the identifier of the IP
Protocol being used for the rekey datagram. Some possible
values are:
ID Value ID Type
-------- -------
06 TCP -- ipProtocolTCP
17 UDP -- ipProtocolUDP"
REFERENCE "RFC 3547 - Section: 5.3. SA KEK Payload"
SYNTAX INTEGER {
ipProtocolUnknown(0),
ipProtocolTCP(1),
ipProtocolUDP(2)
}
CgmGdoiKeyManagementAlgorithm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the identifier of the key/KEK
management algorithm being used to provide forward or
backward access control (i.e. used to exclude group
members).
Following are the possible KEK management algorithm values &
CgmGdoiKeyManagementAlgorithm mappings:
KEK Management Type Value
------------------- -----
LKH 1 -- keyMgmtLkh"
REFERENCE "RFC 3547 - Section: 5.3. SA KEK Payload"
SYNTAX INTEGER {
keyMgmtNone(0),
keyMgmtLkh(1)
}
CgmGdoiEncryptionAlgorithm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the identifier of the
encryption algorithm being used.
Following are the possible updated encryption algorithm
values & CgmGdoiEncryptionAlgorithm mappings after RFC 4306:
Encryption Algorithm Type Value
--------------------------------- -----
ENCR_DES_IV64 1 -- encrAlgDes64
ENCR_DES 2 -- encrAlgDes
ENCR_3DES 3 -- encrAlg3Des
ENCR_RC5 4 -- encrAlgRc5
ENCR_IDEA 5 -- encrAlgIdea
ENCR_CAST 6 -- encrAlgCast
ENCR_BLOWFISH 7 -- encrAlgBlowfish
ENCR_3IDEA 8 -- encrAlg3Idea
ENCR_DES_IV32 9 -- encrAlgDes32
ENCR_NULL 11 -- encrAlgNull
ENCR_AES_CBC 12 -- encrAlgAesCbc
ENCR_AES_CTR 13 -- encrAlgAesCtr
ENCR_AES-CCM_8 14 -- encrAlgAesCcm8
ENCR_AES-CCM_12 15 -- encrAlgAesCcm12
ENCR_AES-CCM_16 16 -- encrAlgAesCcm16
AES-GCM (8-octet ICV) 18 -- encrAlgAesGcm8
AES-GCM (12-octet ICV) 19 -- encrAlgAesGcm12
AES-GCM (16-octet ICV) 20 -- encrAlgAesGcm16
ENCR_NULL_AUTH_AES_GMAC 21
-- encrAlgNullAuthAesGmac
ENCR_CAMELLIA_CBC 23
-- encrAlgCamelliaCbc
ENCR_CAMELLIA_CTR 24
-- encrAlgCamelliaCtr
ENCR_CAMELLIA_CCM (8-octet ICV) 25
-- encrAlgCamelliaCcm8
ENCR_CAMELLIA_CCM (12-octet ICV) 26
-- encrAlgCamelliaCcm12
ENCR_CAMELLIA_CCM (16-octet ICV) 27
-- encrAlgCamelliaCcm16
Following are the possible ESP transform identifiers &
CgmGdoiEncryptionAlgorithm mappings from RFC 2407:
IPsec ESP Transform ID Value
------------------------ -----
ESP_DES_IV64 1 -- encrAlgDes64
ESP_DES 2 -- encrAlgDes
ESP_3DES 3 -- encrAlg3Des
ESP_RC5 4 -- encrAlgRc5
ESP_IDEA 5 -- encrAlgIdea
ESP_CAST 6 -- encrAlgCast
ESP_BLOWFISH 7 -- encrAlgBlowfish
ESP_3IDEA 8 -- encrAlg3Idea
ESP_DES_IV32 9 -- encrAlgDes32
ESP_RC4 10 -- encrAlgRc4
ESP_NULL 11 -- encrAlgNull
ESP_AES-CBC 12 -- encrAlgAesCbc
ESP_AES-CTR 13 -- encrAlgAesCtr
ESP_AES-CCM_8 14 -- encrAlgAesCcm8
ESP_AES-CCM_12 15 -- encrAlgAesCcm12
ESP_AES-CCM_16 16 -- encrAlgAesCcm16
ESP_AES-GCM_8 18 -- encrAlgAesGcm8
ESP_AES-GCM_12 19 -- encrAlgAesGcm12
ESP_AES-GCM_16 20 -- encrAlgAesGcm16
ESP_SEED_CBC 21 -- encrAlgSeedCbc
ESP_CAMELLIA 22
-- encrAlgCamelliaCbc, Ctr, Ccm8, Ccm12, Ccm16
ESP_NULL_AUTH_AES-GMAC 23
-- encrAlgNullAuthAesGmac
Following are the possible KEK_ALGORITHM values specifying
the encryption algorithm used with a KEK &
CgmGdoiEncryptionAlgorithm mappings from the GDOI RFC 3547:
Algorithm Type Value
-------------- -----
KEK_ALG_DES 1 -- encrAlgDes
KEK_ALG_3DES 2 -- encrAlg3Des
KEK_ALG_AES 3 -- encrAlgAesCbc"
REFERENCE
"IANA IKEv2 Parameters
Section: Encryption Algorithm Transform IDs
http://www.iana.org/assignments/ikev2-parameters
IANA 'Magic Numbers' for ISAMP Protocol
Section: IPSEC ESP Transform Identifiers
http://www.iana.org/assignments/isakmp-registry
RFC 2407 - Section: 4.4.4. IPSEC ESP Transform Identifiers
RFC 3547 - Section: 5.3.3. KEK_ALGORITHM
RFC 4306 - Section: 3.3.2. Transform Substructure
RFC 4106, 4309, 4543, 5282, 5529"
SYNTAX INTEGER {
encrAlgNone(0),
encrAlgDes64(1),
encrAlgDes(2),
encrAlg3Des(3),
encrAlgRc5(4),
encrAlgIdea(5),
encrAlgCast(6),
encrAlgBlowfish(7),
encrAlg3Idea(8),
encrAlgDes32(9),
encrAlgRc4(10),
encrAlgNull(11),
encrAlgAesCbc(12),
encrAlgAesCtr(13),
encrAlgAesCcm8(14),
encrAlgAesCcm12(15),
encrAlgAesCcm16(16),
encrAlgAesGcm8(18),
encrAlgAesGcm12(19),
encrAlgAesGcm16(20),
encrAlgNullAuthAesGmac(21),
encrAlgCamelliaCbc(23),
encrAlgCamelliaCtr(24),
encrAlgCamelliaCcm8(25),
encrAlgCamelliaCcm12(26),
encrAlgCamelliaCcm1(27),
encrAlgSeedCbc(28)
}
CgmGdoiPseudoRandomFunction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the identifier of the
pseudo-random function (PRF) being used.
Following are the possible updated PRF values &
CgmGdoiPseudoRandomFunction mappings after RFC 4306:
Pseudo-Random Function Type Value
--------------------------------- -----
PRF_HMAC_MD5 1 -- prfMd5Hmac
PRF_HMAC_SHA1 2 -- prfSha1Hmac
PRF_HMAC_TIGER 3 -- prfTigerHmac
PRF_AES128_XCBC 4 -- prfAes128Xcbc
PRF_HMAC_SHA2_256 5 -- prfSha2Hmac256
PRF_HMAC_SHA2_384 6 -- prfSha2Hmac384
PRF_HMAC_SHA2_512 7 -- prfSha2Hmac512
PRF_AES128_CMAC 8 -- prfAes128Cmac
Following are the possible SIG_HASH_ALGORITHM values &
CgmGdoiPseudoRandomFunction mappings from the GDOI RFC 3547:
Algorithm Type Value
-------------- -----
SIG_HASH_MD5 1 -- prfMd5Hmac
SIG_HASH_SHA1 2 -- prfSha1Hmac"
REFERENCE
"IANA IKEv2 Parameters
Section: Pseudo-random Function Transform IDs
http://www.iana.org/assignments/ikev2-parameters
RFC 3547 - Section: 5.3.6. SIG_HASH_ALGORITHM
RFC 4306 - Section: 3.3.2. Transform Substructure
RFC 4615, 4868"
SYNTAX INTEGER {
prfNone(0),
prfMd5Hmac(1),
prfSha1Hmac(2),
prfTigerHmac(3),
prfAes128Xcbc(4),
prfSha2Hmac256(5),
prfSha2Hmac384(6),
prfSha2Hmac512(7),
prfAes128Cmac(8)
}
CgmGdoiIntegrityAlgorithm ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the identifier of the
integirty algorithm being used.
Following are the possible updated integrity algorithm
values & CgmGdoiIntegrityAlgorithm mappings after RFC 4306:
Integrity Algorithm Type Value
------------------------ -----
AUTH_HMAC_MD5_96 1 -- authAlgMd5Hmac96
AUTH_HMAC_SHA1_96 2 -- authAlgSha1Hmac96
AUTH_DES_MAC 3 -- authAlgDesMac
AUTH_KPDK_MD5 4 -- authAlgMd5Kpdk
AUTH_AES_XCBC_96 5 -- authAlgAesXcbc96
AUTH_HMAC_MD5_128 6 -- authAlgMd5Hmac128
AUTH_HMAC_SHA1_160 7 -- authAlgSha1Hmac160
AUTH_AES_CMAC_96 8 -- authAlgAesCmac96
AUTH_AES_128_GMAC 9 -- authAlgAes128Gmac
AUTH_AES_192_GMAC 10 -- authAlgAes192Gmac
AUTH_AES_256_GMAC 11 -- authAlgAes256Gmac
AUTH_HMAC_SHA2_256_128 12 -- authAlgSha2Hmac256to128
AUTH_HMAC_SHA2_384_192 13 -- authAlgSha2Hmac384to192
AUTH_HMAC_SHA2_512_256 14 -- authAlgSha2Hmac512to256
Following are the possible legacy authentication algorithm
values & CgmGdoIntegrityAlgorithm mappings from RFC 2407:
Algorithm Type Value
-------------- -----
HMAC-MD5 1 -- authAlgMd5Hmac96
HMAC-SHA 2 -- authAlgSha1Hmac96
DES-MAC 3 -- authAlgDesMac
KPDK 4 -- authAlgMd5Kpdk"
REFERENCE
"IANA IKEv2 Parameters
Section: Integrity Algorithm Transform IDs
http://www.iana.org/assignments/ikev2-parameters
RFC 2407 - Section: 4.5. IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.3.6. SIG_HASH_ALGORITHM
RFC 4306 - Section: 3.3.2. Transform Substructure
RFC 4494, 4543, 4595, 4868"
SYNTAX INTEGER {
authAlgNone(0),
authAlgMd5Hmac96(1),
authAlgSha1Hmac96(2),
authAlgDesMac(3),
authAlgMd5Kpdk(4),
authAlgAesXcbc96(5),
authAlgMd5Hmac128(6),
authAlgSha1Hmac160(7),
authAlgAesCmac96(8),
authAlgAes128Gmac(9),
authAlgAes192Gmac(10),
authAlgAes256Gmac(11),
authAlgSha2Hmac256to128(12),
authAlgSha2Hmac384to192(13),
authAlgSha2Hmac512to256(14)
}
CgmGdoiSignatureMethod ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the identifier of the
integirty algorithm being used.
Following are the possible updated authentication method
values & CgmGdoiSignatureMethod mappings after RFC 4306:
Authentication Method Value
----------------------------------- -----
RSA Digital Signature 1 -- sigRsa
Shared Key Message Integrity Code 2 -- sigSharedKey
DSS Digital Signature 3 -- sigDss
ECDSA w/ SHA-256 (P-256 curve) 9 -- sigEcdsa256
ECDSA w/ SHA-384 (P-384 curve) 10 -- sigEcdsa384
ECDSA w/ SHA-512 (P-521 curve) 11 -- sigEcdsa512
Following are the possible legacy IPsec authentication method
values & CgmGdoiSignatureMethod mappings from RFC 2409:
Authentication Method Value
-------------------------------- -----
Pre-Shared Key 1 -- sigSharedKey
DSS Signature 2 -- sigDss
RSA Signature 3 -- sigRsa
Encryption w/ RSA 4 -- sigEncryptRsa
Revised Encryption w/ RSA 5 -- sigRevEncryptRsa
ECDSA w/ SHA-256 (P-256 curve) 9 -- sigEcdsa256
ECDSA w/ SHA-384 (P-384 curve) 10 -- sigEcdsa384
ECDSA w/ SHA-512 (P-521 curve) 11 -- sigEcdsa512
Following are the possible POP algorithm values &
CgmGdoiSignatureMethod mappings from the GDOI RFC 3547:
Algorithm Type Value
-------------- -----
POP_ALG_RSA 1 -- sigRsa
POP_ALG_DSS 2 -- sigDss
POP_ALG_ECDSS 3 -- sigEcdsa256, 384, 512
Following are the possible SIG_ALGORITHM values &
CgmGdoiSignatureMethod mappings from the GDOI RFC 3547:
Algorithm Type Value
-------------- -----
SIG_ALG_RSA 1 -- sigRsa
SIG_ALG_DSS 2 -- sigDss
SIG_ALG_ECDSS 3 -- sigEcdsa256, 384, 512"
REFERENCE
"IANA IKEv2 Parameters
Section: Integrity Algorithm Transform IDs
http://www.iana.org/assignments/ikev2-parameters
RFC 2409 - Section: Appendix A. Authentication Method
RFC 3547 - Sections: 5.3.SA KEK payload
5.3.7. SIG_ALGORITHM
RFC 4306 - Section: 3.8.Authentication Payload
RFC 4754"
SYNTAX INTEGER {
sigNone(0),
sigRsa(1),
sigSharedKey(2),
sigDss(3),
sigEncryptRsa(4),
sigRevEncryptRsa(5),
sigEcdsa256(9),
sigEcdsa384(10),
sigEcdsa512(11)
}
CgmGdoiDiffieHellmanGroup ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the identifier of the
Diffie-Hellman Group being used.
Following are the possible updated Diffie-Hellman Group
values & CgmGdoiDiffieHellmanGroup mappings after RFC 4306:
Diffie-Hellman Group Type Value
------------------------- -----
NONE 0 -- dhNone
Group 1 - 768 Bit MODP 1 -- dhGroup1
Group 2 - 1024 Bit MODP 2 -- dhGroup2
1536-bit MODP Group 5 -- dh1536Modp
2048-bit MODP Group 14 -- dh2048Modp
3072-bit MODP Group 15 -- dh3072Modp
4096-bit MODP Group 16 -- dh4096Modp
6144-bit MODP Group 17 -- dh6144Modp
8192-bit MODP Group 18 -- dh8192Modp
256-bit random ECP group 19 -- dhEcp256
84-bit random ECP group 20 -- dhEcp84
521-bit random ECP group 21 -- dhEcp521
1024-bit MODP w/ 160-bit 22 -- dh1024Modp160
Prime Order Subgroup
2048-bit MODP w/ 224-bit 23 -- dh2048Modp224
Prime Order Subgroup
2048-bit MODP w/ 256-bit 24 -- dh2048Modp256
Prime Order Subgroup
192-bit Random ECP Group 25 -- dhEcp192
224-bit Random ECP Group 26 -- dhEcp224
Following are the possible legacy Diffie-Hellman Group
values & CgmGdoiDiffieHellmanGroup mappings from RFC 2409:
Diffie-Hellman Group Type Value
------------------------- -----
Group 1 - 768 Bit MODP 1 -- dhGroup1
Group 2 - 1024 Bit MODP 2 -- dhGroup2
EC2N group on GP[2^155] 3 -- dhEc2nGp155
EC2N group on GP[2^185] 4 -- dhEc2nGp185"
REFERENCE
"IANA IKEv2 Parameters
Section: Diffie-Hellman Group Transform IDs
http://www.iana.org/assignments/ikev2-parameters
RFC 2409 - Sections: 6.1. First Oakley Default Group
6.2. Second Oakley Default Group
6.3. Third Oakley Default Group
6.4. Fourth Oakley Default Group"
SYNTAX INTEGER {
dhNone(0),
dhGroup1(1),
dhGroup2(2),
dhEc2nGp155(3),
dhEc2nGp185(4),
dh1536Modp(5),
dh2048Modp(14),
dh3072Modp(15),
dh4096Modp(16),
dh6144Modp(17),
dh8192Modp(18),
dhEcp256(19),
dhEcp84(20),
dhEcp521(21),
dh1024Modp160(22),
dh2048Modp224(23),
dh2048Modp256(24),
dhEcp192(25),
dhEcp224(26)
}
CgmGdoiEncapsulationMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the identifier of the
Encapsulation Mode being used.
Following are the possible Encapsulation Mode
values & CgmGdoiEncapsulationMode mappings from RFC 2407:
Encapsulation Mode Value
---------------------------- -----
Tunnel 1 -- encapTunnel
Transport 2 -- encapTransport
UDP-Encapsulated-Tunnel 3 -- encapUdpTunnel
UDP-Encapsulated-Transport 4 -- encapUdpTransport"
REFERENCE
"IANA 'Magic Numbers' for ISAKMP Protocol
Section: Encapsulation Mode
http://www.iana.org/assignments/isakmp-registry
RFC 2407 - Section: 4.5. IPSEC Security Assoc. Attributes
RFC 3947"
SYNTAX INTEGER {
encapUnknown(0),
encapTunnel(1),
encapTransport(2),
encapUdpTunnel(3),
encapUdpTransport(4)
}
CgmGdoiSecurityProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the identifier of the
Security Protocol being used.
Following are the possible Security Protocol ID
values & CgmGdoiSecurityProtocol mappings from the
GDOI RFC 3547:
Security Protocol ID Value
---------------------- -----
GDOI_PROTO_IPSEC_ESP 1 -- secProtocolIpsecEsp"
REFERENCE "RFC 3547 - Section: 5.4. SA TEK Payload"
SYNTAX INTEGER {
secProtocolUnknown(0),
secProtocolIpsecEsp(1)
}
CgmGdoiTekSPI ::= TEXTUAL-CONVENTION
DISPLAY-HINT "4x"
STATUS current
DESCRIPTION
"A textual convention indicating a SPI (Security Parameter
Index) of four (4) octets for a TEK using ESP."
REFERENCE "RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
SYNTAX OCTET STRING (SIZE (4))
CgmGdoiKekStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the status of a GDOI KEK and
its corresponding Security Association (SA).
'inUse' : KEK currently being used to encrypt new KEK/TEKs
'new' : KEK currently being sent to all peers
'old' : KEK that has expired and is no longer being used"
SYNTAX INTEGER {
inUse(1),
new(2),
old(3)
}
CgmGdoiTekStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A textual convention indicating the status of a GDOI TEK and
its corresponding Security Association (SA).
'inbound' : TEK is being used as inbound (receive) SA
'outbound' : TEK is being used as outbound (transmit) SA
'notInUse' : TEK is no longer being used"
SYNTAX INTEGER {
inbound(1),
outbound(2),
notInUse(3)
}
CgmGdoiUnsigned16 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "2d"
STATUS current
DESCRIPTION
"A textual convention indicating a 16-bit unsigned integer
value."
SYNTAX OCTET STRING (SIZE (2))
-- ------------------------------------------------------------------ --
-- GDOI MIB Groups
-- ------------------------------------------------------------------ --
cgmGdoiMIBNotifications OBJECT IDENTIFIER
::= { ciscoGdoiMIB 0 }
cgmGdoiMIBObjects OBJECT IDENTIFIER
::= { ciscoGdoiMIB 1 }
cgmGdoiMIBConformance OBJECT IDENTIFIER
::= { ciscoGdoiMIB 2 }
-- ------------------------------------------------------------------ --
-- GDOI MIB Notifications
-- ------------------------------------------------------------------ --
--
-- *---------------------------------------------------------------- --
-- * GDOI Key Server (KS) Notifications
-- *---------------------------------------------------------------- --
cgmGdoiKeyServerNewRegistration NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A notification from a Key Server sent when a new Group
Member registers to a GDOI Group. This is equivalent to a
Key Server receiving the first message of a GROUPKEY-PULL
exchange from a Group Member."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3. GROUPKEY-PULL Exchange
3.4. Receiver Operations"
::= { cgmGdoiMIBNotifications 1 }
cgmGdoiKeyServerRegistrationComplete NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A notification from a Key Server sent when a Group Member
has successfully registered to itself. This is equivalent
to a Key Server sending the last message of a GROUPKEY-PULL
exchange to the Group Member currently registering
containing KEKs, TEKs, and their associated policies."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3. GROUPKEY-PULL Exchange
3.4. Receiver Operations"
::= { cgmGdoiMIBNotifications 2 }
cgmGdoiKeyServerRekeyPushed NOTIFICATION-TYPE
OBJECTS { cgmGdoiKeyServerRekeysPushed }
STATUS current
DESCRIPTION
"A notification from a Key Server sent when a GROUPKEY-PUSH
message is sent to refresh KEK(s) and or TEK(s). A rekey
is sent periodically by a Key Server based on a configured
time to the Group Members registered to its GDOI Group."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
4. GROUPKEY-PUSH Message
4.7. GCKS Operations"
::= { cgmGdoiMIBNotifications 3 }
cgmGdoiKeyServerNoRsaKeys NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"An error notification from a Key Server sent when an RSA key
is not setup. Each Key Server and Group Member needs to have
an RSA key established. The Key Server signs the TEK rekeys
using this RSA key, also called a Key Encryption Key (KEK).
The Group Member verifies the authenticity of the TEK rekey
using this RSA key."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
4.7. GCKS Operations"
::= { cgmGdoiMIBNotifications 4 }
-- *---------------------------------------------------------------- --
-- * GDOI Group Member (GM) Notifications
-- *---------------------------------------------------------------- --
cgmGdoiGmRegister NOTIFICATION-TYPE
OBJECTS {
cgmGdoiGmRegKeyServerIdType,
cgmGdoiGmRegKeyServerIdValue
}
STATUS current
DESCRIPTION
"A notification from a Group Member when it is starting to
register with its GDOI Group's Key Server. Registration
includes downloading keying & security association material.
This is equivalent to a Group Member or Initiator sending the
first message of a GROUPKEY-PULL exchange to its Group's Key
Server."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3. GROUPKEY-PULL Exchange
3.3. Initiator Operations"
::= { cgmGdoiMIBNotifications 5 }
cgmGdoiGmRegistrationComplete NOTIFICATION-TYPE
OBJECTS {
cgmGdoiGmRegKeyServerIdType,
cgmGdoiGmRegKeyServerIdValue
}
STATUS current
DESCRIPTION
"A notification from a Group Member when it has successfully
registered with a Key Server in its GDOI Group. This is
equivalent to a Group Member receiving the last message of
a GROUPKEY-PULL exchange from the Key Server containing
KEKs, TEKs, and their associated policies."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3. GROUPKEY-PULL Exchange
3.3. Initiator Operations"
::= { cgmGdoiMIBNotifications 6 }
cgmGdoiGmReRegister NOTIFICATION-TYPE
OBJECTS {
cgmGdoiGmRegKeyServerIdType,
cgmGdoiGmRegKeyServerIdValue
}
STATUS current
DESCRIPTION
"A notification from a Group Member when it is starting to
re-register with a Key Server in its GDOI Group. A Group
Member needs to re-register to the key server if its keying &
security association material has expired and it has not
received a rekey from the key server to refresh the material.
This is equivalent to a Group Member sending the first
message of a GROUPKEY-PULL exchange to the Key Server of a
Group it is already registered with."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3. GROUPKEY-PULL Exchange
3.3. Initiator Operations"
::= { cgmGdoiMIBNotifications 7 }
cgmGdoiGmRekeyReceived NOTIFICATION-TYPE
OBJECTS {
cgmGdoiGmRegKeyServerIdType,
cgmGdoiGmRegKeyServerIdValue,
cgmGdoiGmRekeysReceived
}
STATUS current
DESCRIPTION
"A notification from a Group Member when it has successfully
received and processed a rekey from a Key Server in its GDOI
Group. Periodically the key server sends a rekey to refresh
the keying & security association material. This is
equivalent to a Group Member receiving a GROUPKEY-PUSH
message from the Key Server of the Group it is already
registered with."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
4. GROUPKEY-PUSH Message
4.8. Group Member Operations"
::= { cgmGdoiMIBNotifications 8 }
cgmGdoiGmIncompleteCfg NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"An error notification from a Group Member when there is
necessary information missing from the policy/configuration
of a Group Member on an interface when it tries to register
with a Key Server in its GDOI Group. If the GDOI Group
configuration is not complete on a Group Member, it will not
be able to register to the Key Server."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3. GROUPKEY-PULL Exchange
3.3. Initiator Operations"
::= { cgmGdoiMIBNotifications 9 }
cgmGdoiGmNoIpSecFlows NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"An error notification from a Group Member when no more
security associations can be installed after receiving its
keying & security association material. When the Group
Member receives the security association materials, it has
to install the cryptographic keys and policies. If there
is not enough memory to install these materials, there will
be an error thrown."
::= { cgmGdoiMIBNotifications 10 }
cgmGdoiGmRekeyFailure NOTIFICATION-TYPE
OBJECTS {
cgmGdoiGmRegKeyServerIdType,
cgmGdoiGmRegKeyServerIdValue,
cgmGdoiGmRekeysReceived
}
STATUS current
DESCRIPTION
"An error notification from a Group Member when it is unable
to successfully process and install a rekey (GROUPKEY-PUSH
message) sent by the Key Server in its Group that it is
registered with."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
4. GROUPKEY-PUSH Message
4.8. Group Member Operations"
::= { cgmGdoiMIBNotifications 11 }
-- *---------------------------------------------------------------- --
-- * GDOI Key Server (KS) Notifications
-- *---------------------------------------------------------------- --
cgmGdoiKeyServerRoleChange NOTIFICATION-TYPE
OBJECTS {
cgmGdoiNotifGroupIdType,
cgmGdoiNotifGroupIdValue,
cgmGdoiNotifGroupName,
cgmGdoiNotifKeyServerIdType,
cgmGdoiNotifKeyServerIdValue,
cgmGdoiNotifKeyServerRole
}
STATUS current
DESCRIPTION
"This notification is generated when a Key Server changes it's
role from Primary to Secondary or vice-versa. The varbinds
encapsulate the Group information, the Key Server identifier and
the role it has moved to."
::= { cgmGdoiMIBNotifications 12 }
cgmGdoiKeyServerGmDeleted NOTIFICATION-TYPE
OBJECTS {
cgmGdoiNotifGroupIdType,
cgmGdoiNotifGroupIdValue,
cgmGdoiNotifGroupName,
cgmGdoiNotifKeyServerIdType,
cgmGdoiNotifKeyServerIdValue,
cgmGdoiNotifGmIdType,
cgmGdoiNotifGmIdValue
}
STATUS current
DESCRIPTION
"This notification is generated when a Group Member is deleted
from a Key Server. The varbinds encapsulate the Group
information, the Key Server identifier and the Group Member
identifier which is deleted."
::= { cgmGdoiMIBNotifications 13 }
cgmGdoiKeyServerPeerReachable NOTIFICATION-TYPE
OBJECTS {
cgmGdoiNotifGroupIdType,
cgmGdoiNotifGroupIdValue,
cgmGdoiNotifGroupName,
cgmGdoiNotifKeyServerIdType,
cgmGdoiNotifKeyServerIdValue,
cgmGdoiNotifPeerKsIdType,
cgmGdoiNotifPeerKsIdValue
}
STATUS current
DESCRIPTION
"This notification is generated from a Key Server when an
unreachable peer Key Server becomes reachable. The varbinds
encapsulate the Group information, the Key Server identifier and
the peer Key Server identifier."
::= { cgmGdoiMIBNotifications 14 }
cgmGdoiKeyServerPeerUnreachable NOTIFICATION-TYPE
OBJECTS {
cgmGdoiNotifGroupIdType,
cgmGdoiNotifGroupIdValue,
cgmGdoiNotifGroupName,
cgmGdoiNotifKeyServerIdType,
cgmGdoiNotifKeyServerIdValue,
cgmGdoiNotifPeerKsIdType,
cgmGdoiNotifPeerKsIdValue
}
STATUS current
DESCRIPTION
"This notification is generated from a Key Server when a
reachable peer Key Server becomes unreachable. The varbinds
encapsulate the Group information, the Key Server identifier and
the peer Key Server identifier."
::= { cgmGdoiMIBNotifications 15 }
-- ------------------------------------------------------------------ --
-- GDOI MIB Management Objects
-- ------------------------------------------------------------------ --
--
-- *---------------------------------------------------------------- --
-- * The GDOI "Group" Table
-- *---------------------------------------------------------------- --
cgmGdoiGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information regarding GDOI Groups in use on
the network device being queried."
::= { cgmGdoiMIBObjects 1 }
cgmGdoiGroupEntry OBJECT-TYPE
SYNTAX CgmGdoiGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing GDOI Group information, uniquely
identified by the GDOI Group ID."
REFERENCE
"RFC 3547 - Sections: 5.1.1. Identification Type Values
5.1.1.1. ID_KEY_ID
RFC 4306 - Section: 3.5. Identification Payloads"
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue
}
::= { cgmGdoiGroupTable 1 }
CgmGdoiGroupEntry ::= SEQUENCE {
cgmGdoiGroupIdType CgmGdoiIdentificationType,
cgmGdoiGroupIdLength Unsigned32,
cgmGdoiGroupIdValue CgmGdoiIdentificationValue,
cgmGdoiGroupName DisplayString,
cgmGdoiGroupMemberCount Unsigned32,
cgmGdoiGroupActivePeerKeyServerCount Unsigned32,
cgmGdoiGroupLastRekeyRetransmits Unsigned32,
cgmGdoiGroupLastRekeyTimeTaken CiscoMilliSeconds
}
cgmGdoiGroupIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Identification Type Value used to parse a GDOI Group ID.
The GDOI RFC 3547 defines the types that can be used as a
GDOI Group ID, and RFC 4306 defines all valid types that can
be used as an identifier. This Group ID type is sent as the
'ID Type' field of the Identification Payload for a GDOI
GROUPKEY-PULL exchange."
REFERENCE
"RFC 3547 - Sections: 5.1.1. Identification Type Values
5.1.1.1. ID_KEY_ID
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiGroupEntry 1 }
cgmGdoiGroupIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of a Group ID. If no
length is given (i.e. it has a value of 0), the default
length of its cgmGdoiGroupIdType should be used as long as it
is not reprsented by an ASCII string. If the value has a
type that is represented by an ASCII string, a length MUST
be included. If the length given is not 0, it should match
the 'Payload Length' (subtracting the generic header length)
of the Identification Payload for a GDOI GROUPKEY-PULL
exchange."
REFERENCE
"RFC 3547 - Sections: 5.1.1. Identification Type Values
5.1.1.1. ID_KEY_ID
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiGroupEntry 2 }
cgmGdoiGroupIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of a Group ID with its type indicated by the
cgmGdoiGroupIdType. Use the cgmGdoiGroupIdType to parse the
Group ID correctly. This Group ID value is sent as the
'Identification Data' field of the Identification Payload
for a GDOI GROUPKEY-PULL exchange."
REFERENCE
"RFC 3547 - Sections: 5.1.1. Identification Type Values
5.1.1.1. ID_KEY_ID
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiGroupEntry 3 }
cgmGdoiGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string-readable name configured for or given to a GDOI
Group."
::= { cgmGdoiGroupEntry 4 }
cgmGdoiGroupMemberCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of registered Group Members to this group, on a Key
Server."
::= { cgmGdoiGroupEntry 5 }
cgmGdoiGroupActivePeerKeyServerCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the active Key Server sessions between the local
Key Server and peer Key Servers for this group."
::= { cgmGdoiGroupEntry 6 }
cgmGdoiGroupLastRekeyRetransmits OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable returns the cummulative count of number of rekey
messages and retransmits during the last cycle of rekey. This
count displays the information pertaining to Group Members only
(and is not related to any sync operation pertaining to peer Key
Servers). This information is a reflection of rekey operation on
a Key Server that performs a rekey, and is not available for the
Key Server(s) which do not perform rekeys since they do not
receive any ACKs. While a rekey is in progress, this variable
will give information of the last rekey operation."
::= { cgmGdoiGroupEntry 7 }
cgmGdoiGroupLastRekeyTimeTaken OBJECT-TYPE
SYNTAX CiscoMilliSeconds
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable returns the duration (in milliseconds) of the
last rekey operation. This information is valid for a Key
Server that performs a rekey, and is not available for the
Key Server(s) which do not perform rekeys since they do not
receive any ACKs. While a rekey is in progress, this variable
will give information of the last rekey operation."
::= { cgmGdoiGroupEntry 8 }
-- *---------------------------------------------------------------- --
-- * GDOI MIB Management Object Groups
-- *---------------------------------------------------------------- --
cgmGdoiPeers OBJECT IDENTIFIER
::= { cgmGdoiMIBObjects 2 }
cgmGdoiSecAssociations OBJECT IDENTIFIER
::= { cgmGdoiMIBObjects 3 }
cgmGdoiNotifCntl OBJECT IDENTIFIER
::= { cgmGdoiMIBObjects 4 }
-- #-------------------------------------------------------------- --
-- # The GDOI Notification Variables Table
-- #-------------------------------------------------------------- --
cgmGdoiNotifVars OBJECT IDENTIFIER
::= { cgmGdoiMIBObjects 5 }
-- *---------------------------------------------------------------- --
-- * The GDOI "Peers" Group
-- *---------------------------------------------------------------- --
--
-- #-------------------------------------------------------------- --
-- # The GDOI "Key Server (KS)" Table
-- #-------------------------------------------------------------- --
cgmGdoiKeyServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiKeyServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information for the GDOI group from the perspective
of the Key Servers (GCKSs) on the network device being
queried."
::= { cgmGdoiPeers 1 }
cgmGdoiKeyServerEntry OBJECT-TYPE
SYNTAX CgmGdoiKeyServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing GDOI Key Server (KS) information,
uniquely identified by the Group & Key Server IDs."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3.4. Receiver Operations
4.7. GCKS Operations"
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue,
cgmGdoiKeyServerIdType,
cgmGdoiKeyServerIdValue
}
::= { cgmGdoiKeyServerTable 1 }
CgmGdoiKeyServerEntry ::= SEQUENCE {
cgmGdoiKeyServerIdType CgmGdoiIdentificationType,
cgmGdoiKeyServerIdLength Unsigned32,
cgmGdoiKeyServerIdValue CgmGdoiIdentificationValue,
cgmGdoiKeyServerActiveKEK CgmGdoiKekSPI,
cgmGdoiKeyServerRekeysPushed Counter32,
cgmGdoiKeyServerRole CgmGdoiKsRole,
cgmGdoiKeyServerRegisteredGMs Unsigned32
}
cgmGdoiKeyServerIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for a Key Server. RFC 4306 defines all valid
types that can be used as an identifier. These
identification types are sent as the 'SRC ID Type' and 'DST
ID Type' of the KEK and TEK payloads for GDOI GROUPKEY-PULL
and GROUPKEY-PUSH exchanges."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
5.4.1. PROTO_IPSEC_ESP
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiKeyServerEntry 1 }
cgmGdoiKeyServerIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of a Key Server ID. If no
length is given (i.e. it has a value of 0), the default
length of its cgmGdoiKeyServerIdType should be used as long as
it is not reprsented by an ASCII string. If the value has a
type that is represented by an ASCII string, a length MUST
be included. If the length given is not 0, it should match
the 'SRC ID Data Len' and 'DST ID Data Len' fields sent in
the KEK and TEK payloads for GDOI GROUPKEY-PULL and
GROUPKEY-PUSH exchanges."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKeyServerEntry 2 }
cgmGdoiKeyServerIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the identity information for a Key Server with
its type indicated by the cgmGdoiKeyServerIdType. Use the
cgmGdoiKeyServerIdType to parse the Key Server ID correctly.
This Key Server ID value is sent as the 'SRC
Identification Data' and 'DST Identification Data' of the
KEK and TEK payloads for GDOI GROUPKEY-PULL and GROUPKEY-PUSH
exchanges."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKeyServerEntry 3 }
cgmGdoiKeyServerActiveKEK OBJECT-TYPE
SYNTAX CgmGdoiKekSPI
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI of the Key Encryption Key (KEK) that is currently
being used by the Key Server to encrypt the GROUPKEY-PUSH
keying & security association material sent to the Key
Server's registered Group Members."
REFERENCE "RFC 3547 - Section: 5.3. SA KEK payload"
::= { cgmGdoiKeyServerEntry 4 }
cgmGdoiKeyServerRekeysPushed OBJECT-TYPE
SYNTAX Counter32
UNITS "GROUPKEY-PUSH Messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number of the last rekey sent from the Key
Server to its registered Group Members for this GDOI group."
REFERENCE
"RFC 3547 - Sections: 3.2. Messages
3.4. Receiver Operations
4. GROUPKEY-PUSH Message
4.7. GCKS Operations
5.6. Sequence Number Payload"
::= { cgmGdoiKeyServerEntry 5 }
cgmGdoiKeyServerRole OBJECT-TYPE
SYNTAX CgmGdoiKsRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current role of the queried Key Server for the Group."
::= { cgmGdoiKeyServerEntry 6 }
cgmGdoiKeyServerRegisteredGMs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of registered Group Members to the Key Server
identified by the index."
::= { cgmGdoiKeyServerEntry 7 }
-- #-------------------------------------------------------------- --
-- # The GDOI "Group Members" Table
-- #-------------------------------------------------------------- --
cgmGdoiGmTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiGmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information regarding GDOI Group Members (GMs)
locally configured on the network device being queried. Note
that Local Group Members may or may not be registered to a
Key Server in its GDOI Group on the same network device being
queried."
::= { cgmGdoiPeers 2 }
cgmGdoiGmEntry OBJECT-TYPE
SYNTAX CgmGdoiGmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing Local GDOI Group Member information,
uniquely identified by Group & GM IDs. Because the Group
Member is Local to the network device being queried, TEKs
installed for this Group Member can be queried as well."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3.3. Initiator Operations
4.8. Group Member Operations"
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue,
cgmGdoiGmIdType,
cgmGdoiGmIdValue
}
::= { cgmGdoiGmTable 1 }
CgmGdoiGmEntry ::= SEQUENCE {
cgmGdoiGmIdType CgmGdoiIdentificationType,
cgmGdoiGmIdLength Unsigned32,
cgmGdoiGmIdValue CgmGdoiIdentificationValue,
cgmGdoiGmRegKeyServerIdType CgmGdoiIdentificationType,
cgmGdoiGmRegKeyServerIdLength Unsigned32,
cgmGdoiGmRegKeyServerIdValue CgmGdoiIdentificationValue,
cgmGdoiGmActiveKEK CgmGdoiKekSPI,
cgmGdoiGmRekeysReceived Counter32,
cgmGdoiGmActiveTEKNum Counter32
}
cgmGdoiGmIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for a Initiator or Group Member. RFC 4306
defines all valid types that can be used as an identifier.
These identification types are sent as the 'SRC ID Type' and
'DST ID Type' of the KEK and TEK payloads for GDOI
GROUPKEY-PULL and GROUPKEY-PUSH exchanges."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
5.4.1. PROTO_IPSEC_ESP
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiGmEntry 1 }
cgmGdoiGmIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of a Group Member ID. If
no length is given (i.e. it has a value of 0), the default
length of its cgmGdoiGmIdType should be used as long as
it is not reprsented by an ASCII string. If the value has a
type that is represented by an ASCII string, a length MUST
be included. If the length given is not 0, it should match
the 'SRC ID Data Len' and 'DST ID Data Len' fields sent in
the KEK and TEK payloads for GDOI GROUPKEY-PULL and
GROUPKEY-PUSH exchanges."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmEntry 2 }
cgmGdoiGmIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the identity information for a Group Member with
its type indicated by the cgmGdoiGmIdType. Use the
cgmGdoiGmIdType to parse the Group Member ID correctly.
This Group Member ID value is sent as the 'SRC
Identification Data' and 'DST Identification Data' of the
KEK and TEK payloads for GDOI GROUPKEY-PULL and GROUPKEY-PUSH
exchanges."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmEntry 3 }
cgmGdoiGmRegKeyServerIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information of this Group Member's registered Key Server.
RFC 4306 defines all valid types that can be used as an
identifier. These identification types are sent as the 'SRC
ID Type' and 'DST ID Type' of the KEK and TEK payloads for
GDOI GROUPKEY-PULL and GROUPKEY-PUSH exchanges."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
5.4.1. PROTO_IPSEC_ESP
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiGmEntry 4 }
cgmGdoiGmRegKeyServerIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of the registered Key
Server's ID. If no length is given (i.e. it has a value
of 0), the default length of its cgmGdoiGmRegKeyServerIdType
should be used as long as it is not reprsented by an ASCII
string. If the value has a type that is represented by an
ASCII string, a length MUST be included. If the length given
is not 0, it should match the 'SRC ID Data Len' and 'DST ID
Data Len' fields sent in the KEK and TEK payloads for GDOI
GROUPKEY-PULL and GROUPKEY-PUSH exchanges."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmEntry 5 }
cgmGdoiGmRegKeyServerIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the identity information for this Group Member's
registered Key Server with its type indicated by the
cgmGdoiGmRegKeyServerIdType. Use the
cgmGdoiGmRegKeyServerIdType to parse the registered Key
Server's ID correctly. This Key Server ID value is sent as
the 'SRC Identification Data' and 'DST Identification Data'
of the KEK and TEK payloads for GDOI GROUPKEY-PULL and
GROUPKEY-PUSH exchanges."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmEntry 6 }
cgmGdoiGmActiveKEK OBJECT-TYPE
SYNTAX CgmGdoiKekSPI
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SPI of the Key Encryption Key (KEK) that is currently
being used by the Group Member to authenticate & decrypt a
rekey from a GROUPKEY-PUSH message."
::= { cgmGdoiGmEntry 7 }
cgmGdoiGmRekeysReceived OBJECT-TYPE
SYNTAX Counter32
UNITS "GROUPKEY-PUSH Messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number of the last rekey successfully received
from this Group Member's registered Key Server."
REFERENCE
"RFC 3547 - Sections: 3.2. Messages
3.3. Initiator Operations
4. GROUPKEY-PUSH Message
4.8. Group Member Operations
5.6. Sequence Number Payload"
::= { cgmGdoiGmEntry 8 }
cgmGdoiGmActiveTEKNum OBJECT-TYPE
SYNTAX Counter32
UNITS "Number of traffic encryption keys"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active traffic encryption keys (TEKS) currently
being used by the Group Member to encrypt/decrypt/authenticate
dataplane traffic."
::= { cgmGdoiGmEntry 9 }
-- #-------------------------------------------------------------- --
-- # The COOP Peer Table
-- #-------------------------------------------------------------- --
cgmGdoiCoopPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiCoopPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information for the Cooperative Key Server (COOP KS)
peer(s). Multiple COOP KSs are required to ensure seamless
fault recovery if a KS fails or becomes unreachable. The
information populated in this table, is extracted from the COOP
messages exchanged between the local KS (device being queried)
and the COOP Peer(s)."
::= { cgmGdoiPeers 3 }
cgmGdoiCoopPeerEntry OBJECT-TYPE
SYNTAX CgmGdoiCoopPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing COOP Peer Key Server's (KS) information,
uniquely identified by the Group & Peer Key Server IDs."
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue,
cgmGdoiCoopPeerIdType,
cgmGdoiCoopPeerIdValue
}
::= { cgmGdoiCoopPeerTable 1 }
CgmGdoiCoopPeerEntry ::= SEQUENCE {
cgmGdoiCoopPeerIdType CgmGdoiIdentificationType,
cgmGdoiCoopPeerIdLength Unsigned32,
cgmGdoiCoopPeerIdValue CgmGdoiIdentificationValue,
cgmGdoiCoopPeerRole CgmGdoiKsRole,
cgmGdoiCoopPeerStatus CgmGdoiKsStatus,
cgmGdoiCoopPeerRegisteredGMs Unsigned32
}
cgmGdoiCoopPeerIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for a Key Server. RFC 4306 defines all valid types
that can be used as an identifier. These identification types
are sent as the 'SRC ID Type' and 'DST ID Type' of the KEK and
TEK payloads for GDOI GROUPKEY-PULL and GROUPKEY-PUSH
exchanges."
::= { cgmGdoiCoopPeerEntry 1 }
cgmGdoiCoopPeerIdLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of a Peer (Key Server) ID.
If no length is given (i.e. it has a value of 0), the default
length of its cgmGdoiCoopPeerIdType should be used as long as it
is not reprsented by an ASCII string. If the value has a type
that is represented by an ASCII string, a length MUST be
included. If the length given is not 0, it should match the
'SRC ID Data Len' and 'DST ID Data Len' fields sent in the KEK
and TEK payloads for GDOI GROUPKEY-PULL and GROUPKEY-PUSH
exchanges."
::= { cgmGdoiCoopPeerEntry 2 }
cgmGdoiCoopPeerIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the identity information for a COOP Key Server
with its type indicated by the cgmGdoiCoopPeerIdType. Use the
cgmGdoiCoopPeerIdType to parse the COOP Peer (Key Server) ID
correctly. This COOP Peer (Key Server) ID value is sent as the
'SRC Identification Data' and 'DST Identification Data' of the
KEK and TEK payloads for GDOI GROUPKEY-PULL and GROUPKEY-PUSH
exchanges."
::= { cgmGdoiCoopPeerEntry 3 }
cgmGdoiCoopPeerRole OBJECT-TYPE
SYNTAX CgmGdoiKsRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current role of the COOP Peer (Key Server) for the Group."
::= { cgmGdoiCoopPeerEntry 4 }
cgmGdoiCoopPeerStatus OBJECT-TYPE
SYNTAX CgmGdoiKsStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the COOP Peer (Key Server) as seen from
the local Key Server."
::= { cgmGdoiCoopPeerEntry 5 }
cgmGdoiCoopPeerRegisteredGMs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of registered Group Members to the COOP Peer (Key
Server) identified by the index."
::= { cgmGdoiCoopPeerEntry 6 }
-- *---------------------------------------------------------------- --
-- * The GDOI "Security Associations (SA)" Group
-- *---------------------------------------------------------------- --
--
-- #-------------------------------------------------------------- --
-- # The GDOI "Key Server (KS) KEK Policy/SA" Table
-- #-------------------------------------------------------------- --
cgmGdoiKsKekTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiKsKekEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information regarding GDOI Key Encryption Key
(KEK) Policies & Security Associations (SAs) currently
configured/installed for GDOI entities acting as Key Servers
on the network device being queried. There is one entry in
this table for each KEK Policy/SA that has been
configured/installed. Each KEK Policy/SA is uniquely
identified by a SPI at any given time."
::= { cgmGdoiSecAssociations 1 }
cgmGdoiKsKekEntry OBJECT-TYPE
SYNTAX CgmGdoiKsKekEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the attributes associated with a GDOI KEK
Policy/SA, uniquely identified by the Group ID, Key Server
ID, & SPI value assigned by the given Key Server to the KEK.
There will be at least one KEK Policy/SA entry for each Key
Server & two KEK Policy/SA entries for a given Key Server
only during a KEK rekey when a new KEK is created/installed.
The KEK SPI is unique for every KEK for a given Key Server."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3.2. Messages
4. GROUPKEY-PUSH Message
5.3. SA KEK Payload
5.3.1. KEK Attributes
5.5. Key Download Payload"
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue,
cgmGdoiKeyServerIdType,
cgmGdoiKeyServerIdValue,
cgmGdoiKsKekIndex
}
::= { cgmGdoiKsKekTable 1 }
CgmGdoiKsKekEntry ::= SEQUENCE {
cgmGdoiKsKekIndex Unsigned32,
cgmGdoiKsKekSPI CgmGdoiKekSPI,
cgmGdoiKsKekSrcIdType CgmGdoiIdentificationType,
cgmGdoiKsKekSrcIdLength Unsigned32,
cgmGdoiKsKekSrcIdValue CgmGdoiIdentificationValue,
cgmGdoiKsKekSrcIdPort CgmGdoiUnsigned16,
cgmGdoiKsKekDstIdType CgmGdoiIdentificationType,
cgmGdoiKsKekDstIdLength Unsigned32,
cgmGdoiKsKekDstIdValue CgmGdoiIdentificationValue,
cgmGdoiKsKekDstIdPort CgmGdoiUnsigned16,
cgmGdoiKsKekIpProtocol CgmGdoiIpProtocolId,
cgmGdoiKsKekMgmtAlg CgmGdoiKeyManagementAlgorithm,
cgmGdoiKsKekEncryptAlg CgmGdoiEncryptionAlgorithm,
cgmGdoiKsKekEncryptKeyLength Unsigned32,
cgmGdoiKsKekSigHashAlg CgmGdoiPseudoRandomFunction,
cgmGdoiKsKekSigAlg CgmGdoiSignatureMethod,
cgmGdoiKsKekSigKeyLength Unsigned32,
cgmGdoiKsKekOakleyGroup CgmGdoiDiffieHellmanGroup,
cgmGdoiKsKekOriginalLifetime Unsigned32,
cgmGdoiKsKekRemainingLifetime Unsigned32,
cgmGdoiKsKekStatus CgmGdoiKekStatus
}
cgmGdoiKsKekIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the KS KEK.The value of the index is a number
which begins at one and is incremented with each KS KEK that
is to be created by the KS for that GDOI group."
::= { cgmGdoiKsKekEntry 1 }
cgmGdoiKsKekSPI OBJECT-TYPE
SYNTAX CgmGdoiKekSPI
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Security Parameter Index (SPI) of a KEK
Policy/SA. The SPI must be the ISAKMP Header cookie pair
where the first 8 octets become the 'Initiator Cookie' field
of the GROUPKEY-PUSH message ISAKMP HDR, and the second 8
octets become the 'Responder Cookie' in the same HDR. As
described above, these cookies are assigned by the GCKS."
::= { cgmGdoiKsKekEntry 2 }
cgmGdoiKsKekSrcIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for the source of a KEK Policy/SA. RFC 4306
defines all valid types that can be used as an identifier.
This identification type is sent as the 'SRC ID Type' of
the KEK payload."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiKsKekEntry 3 }
cgmGdoiKsKekSrcIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of the source ID of
a KEK Policy/SA. If no length is given (i.e. it has a value
of 0), the default length of its cgmGdoiKsKekSrcIdType should be
used as long as it is not reprsented by an ASCII string. If
the value has a type that is represented by an ASCII string,
a length MUST be included. If the length given is not 0, it
should match the 'SRC ID Data Len' field sent in the KEK
payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiKsKekEntry 4 }
cgmGdoiKsKekSrcIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the identity information for the source of
a KEK Policy/SA with its type indicated by the
cgmGdoiKsKekSrcIdType. Use the cgmGdoiKsKekSrcIdType to parse
the KEK Source ID correctly. This ID value is sent as the 'SRC
Identification Data' of a KEK payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiKsKekEntry 5 }
cgmGdoiKsKekSrcIdPort OBJECT-TYPE
SYNTAX CgmGdoiUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value specifying a port associated with the source ID of
a KEK Policy/SA. A value of zero means that the port should
be ignored. This port value is sent as the `SRC ID Port`
field of a KEK payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiKsKekEntry 6 }
cgmGdoiKsKekDstIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for the dest. of a KEK Policy/SA (multicast
rekey address). RFC 4306 defines all valid types that can
be used as an identifier. This identification type is sent as
the 'DST ID Type' of the KEK payload."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiKsKekEntry 7 }
cgmGdoiKsKekDstIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of the destination ID of
a KEK Policy/SA (multicast rekey address). If no length is
given (i.e. it has a valueof 0), the default length of its
cgmGdoiKsKekDstIdType should be used as long as it is not
reprsented by an ASCII string. If the value has a type that
is represented by an ASCII string, a length MUST be included.
If the length given is not 0, it should match the 'DST ID Data
Len' field sent in the KEK payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiKsKekEntry 8 }
cgmGdoiKsKekDstIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the identity information for the destination of
a KEK Policy/SA (multicast rekey address) with its type
indicated by the cgmGdoiKsKekDstIdType. Use the
cgmGdoiKsKekDstIdType to parse the KEK Dest. ID correctly.
This ID value is sent as the 'DST Identification Data' of a
KEK payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiKsKekEntry 9 }
cgmGdoiKsKekDstIdPort OBJECT-TYPE
SYNTAX CgmGdoiUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value specifying a port associated with the dest. ID of
a KEK Policy/SA. A value of zero means that the port should
be ignored. This port value is sent as the `DST ID Port`
field of a KEK payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiKsKekEntry 10 }
cgmGdoiKsKekIpProtocol OBJECT-TYPE
SYNTAX CgmGdoiIpProtocolId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the IP protocol ID (e.g. UDP/TCP) being used
for the rekey datagram."
REFERENCE "RFC 3547 - Section: 5.3. SA KEK payload"
::= { cgmGdoiKsKekEntry 11 }
cgmGdoiKsKekMgmtAlg OBJECT-TYPE
SYNTAX CgmGdoiKeyManagementAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KEK_MANAGEMENT_ALGORITHM which specifies
the group KEK management algorithm used to provide forward
or backward access control (i.e. used to exclude group
members).
KEK Management Type Value
------------------- -----
RESERVED 0
LKH 1
RESERVED 2-127
Private Use 128-255"
REFERENCE
"RFC 3547 - Section: 5.3.2. KEK_MANAGEMENT_ALGORITHM"
::= { cgmGdoiKsKekEntry 12 }
cgmGdoiKsKekEncryptAlg OBJECT-TYPE
SYNTAX CgmGdoiEncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KEK_ALGORITHM which specifies the
encryption algorithm used with the KEK Policy/SA. A GDOI
implementaiton must support KEK_ALG_3DES.
Following are the KEK encryption algoritm values defined in
the GDOI RFC 3547, however the CgmGdoiEncryptionAlgorithm TC
defines all possible values.
Algorithm Type Value
-------------- -----
RESERVED 0
KEK_ALG_DES 1
KEK_ALG_3DES 2
KEK_ALG_AES 3
RESERVED 4-127
Private Use 128-255"
REFERENCE "RFC 3547 - Section 5.3.3. KEK_ALGORITHM"
::= { cgmGdoiKsKekEntry 13 }
cgmGdoiKsKekEncryptKeyLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KEK_KEY_LENGTH which specifies the KEK
Algorithm key length (in bits)."
REFERENCE "RFC 3547 - Section: 5.3.4. KEK_KEY_LENGTH"
::= { cgmGdoiKsKekEntry 14 }
cgmGdoiKsKekSigHashAlg OBJECT-TYPE
SYNTAX CgmGdoiPseudoRandomFunction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the SIG_HASH_ALGORITHM which specifies the SIG
payload hash algorithm. This is not required (i.e. could
have a value of zero) if the SIG_ALGORITHM is SIG_ALG_DSS or
SIG_ALG_ECDSS, which imply SIG_HASH_SHA1 (i.e. must have a
value of zero or SIG_HASH_SHA1).
Following are the Signature Hash Algorithm values defined in
the GDOI RFC 3547, however the CgmGdoiPseudoRandomFunction TC
defines all possible values.
Algorithm Type Value
-------------- -----
RESERVED 0
SIG_HASH_MD5 1
SIG_HASH_SHA1 2
RESERVED 3-127
Private Use 128-255"
REFERENCE "RFC 3547 - Section: 5.3.6. SIG_HASH_ALGORITHM"
::= { cgmGdoiKsKekEntry 15 }
cgmGdoiKsKekSigAlg OBJECT-TYPE
SYNTAX CgmGdoiSignatureMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the SIG_ALGORITHM which specifies the SIG
payload signature algorithm. A GDOI implementation must
support SIG_ALG_RSA.
Following are the Signature Algorithm values defined in
the GDOI RFC 3547, however the CgmGdoiSignatureMethod TC
defines all possible values.
Algorithm Type Value
-------------- -----
RESERVED 0
SIG_ALG_RSA 1
SIG_ALG_DSS 2
SIG_ALG_ECDSS 3
RESERVED 4-127
Private Use 128-255"
REFERENCE "RFC 3547 - Section: 5.3.7. SIG_ALGORITHM"
::= { cgmGdoiKsKekEntry 16 }
cgmGdoiKsKekSigKeyLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the SIG_KEY_LENGTH which specifies the length
of the SIG payload key."
REFERENCE "RFC 3547 - Section 5.3.8. SIG_KEY_LENGTH"
::= { cgmGdoiKsKekEntry 17 }
cgmGdoiKsKekOakleyGroup OBJECT-TYPE
SYNTAX CgmGdoiDiffieHellmanGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KE_OAKLEY_GROUP which specifies the OAKLEY
or Diffie-Hellman Group used to compute the PFS secret in the
optional KE payload of the GDOI GROUPKEY-PULL exchange."
REFERENCE "RFC 3547 - Section 5.3.9. KE_OAKLEY_GROUP"
::= { cgmGdoiKsKekEntry 18 }
cgmGdoiKsKekOriginalLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KEK_KEY_LIFETIME which specifies the maximum
time for which a KEK is valid. The GCKS may refresh the KEK
at any time before the end of the valid period. The value is
a four (4) octet (32-bit) number defining a valid time period
in seconds."
REFERENCE "RFC 3547 - Section 5.3.5. KEK_KEY_LIFETIME"
::= { cgmGdoiKsKekEntry 19 }
cgmGdoiKsKekRemainingLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the remaining time for which a KEK is valid.
The value is a four (4) octet (32-bit) number which begins at
the value of cgmGdoiKsKekOriginalLifetime when the KEK is sent
and counts down to zero in seconds. If the lifetime has
already expired, this value should remain at zero (0) until
the Key Server refreshes the KEK."
REFERENCE "RFC 3547 - Section 5.3.5. KEK_KEY_LIFETIME"
::= { cgmGdoiKsKekEntry 20 }
cgmGdoiKsKekStatus OBJECT-TYPE
SYNTAX CgmGdoiKekStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the KEK Policy/SA. When this status value is
queried, one of the following is returned:
inUse(1), new(2), old(3)."
::= { cgmGdoiKsKekEntry 21 }
-- #-------------------------------------------------------------- --
-- # The GDOI "Group Member (GM) KEK SA" Table
-- #-------------------------------------------------------------- --
cgmGdoiGmKekTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiGmKekEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information regarding GDOI Key Encryption Key
(KEK) Security Associations (SAs) currently installed for
GDOI entities acting as Group Members on the network device
being queried. There is one entry in this table for each
KEK SA that has been installed and not yet deleted. Each
KEK SA is uniquely identified by a SPI at any given time."
::= { cgmGdoiSecAssociations 2 }
cgmGdoiGmKekEntry OBJECT-TYPE
SYNTAX CgmGdoiGmKekEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the attributes associated with a GDOI KEK
SA, uniquely identified by the Group ID, Group Member (GM)
ID, & SPI value assigned by the GM's registered Key Server to
the KEK. There will be at least one KEK SA entry for each GM
& two KEK SA entries for a given GM only during a KEK rekey
when a new KEK is received & installed. The KEK SPI is
unique for every KEK for a given Group Member."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3.2. Messages
4. GROUPKEY-PUSH Message
5.3. SA KEK Payload
5.3.1. KEK Attributes
5.5. Key Download Payload"
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue,
cgmGdoiGmIdType,
cgmGdoiGmIdValue,
cgmGdoiGmKekIndex
}
::= { cgmGdoiGmKekTable 1 }
CgmGdoiGmKekEntry ::= SEQUENCE {
cgmGdoiGmKekIndex Unsigned32,
cgmGdoiGmKekSPI CgmGdoiKekSPI,
cgmGdoiGmKekSrcIdType CgmGdoiIdentificationType,
cgmGdoiGmKekSrcIdLength Unsigned32,
cgmGdoiGmKekSrcIdValue CgmGdoiIdentificationValue,
cgmGdoiGmKekSrcIdPort CgmGdoiUnsigned16,
cgmGdoiGmKekDstIdType CgmGdoiIdentificationType,
cgmGdoiGmKekDstIdLength Unsigned32,
cgmGdoiGmKekDstIdValue CgmGdoiIdentificationValue,
cgmGdoiGmKekDstIdPort CgmGdoiUnsigned16,
cgmGdoiGmKekIpProtocol CgmGdoiIpProtocolId,
cgmGdoiGmKekMgmtAlg CgmGdoiKeyManagementAlgorithm,
cgmGdoiGmKekEncryptAlg CgmGdoiEncryptionAlgorithm,
cgmGdoiGmKekEncryptKeyLength Unsigned32,
cgmGdoiGmKekSigHashAlg CgmGdoiPseudoRandomFunction,
cgmGdoiGmKekSigAlg CgmGdoiSignatureMethod,
cgmGdoiGmKekSigKeyLength Unsigned32,
cgmGdoiGmKekOakleyGroup CgmGdoiDiffieHellmanGroup,
cgmGdoiGmKekOriginalLifetime Unsigned32,
cgmGdoiGmKekRemainingLifetime Unsigned32,
cgmGdoiGmKekStatus CgmGdoiKekStatus
}
cgmGdoiGmKekIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the GM KEK in table.The value of the index is a
number which begins at one and is incremented with each
KEK that is used by the GM for that GDOI group."
::= { cgmGdoiGmKekEntry 1 }
cgmGdoiGmKekSPI OBJECT-TYPE
SYNTAX CgmGdoiKekSPI
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Security Parameter Index (SPI) of a KEK
SA. The SPI must be the ISAKMP Header cookie pair
where the first 8 octets become the 'Initiator Cookie' field
of the GROUPKEY-PUSH message ISAKMP HDR, and the second 8
octets become the 'Responder Cookie' in the same HDR. As
described above, these cookies are assigned by the GCKS."
::= { cgmGdoiGmKekEntry 2 }
cgmGdoiGmKekSrcIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for the source of a KEK SA. RFC 4306
defines all valid types that can be used as an identifier.
This identification type is sent as the 'SRC ID Type' of
the KEK payload."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiGmKekEntry 3 }
cgmGdoiGmKekSrcIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of the source ID of
a KEK SA. If no length is given (i.e. it has a value
of 0), the default length of its cgmGdoiGmKekSrcIdType should be
used as long as it is not reprsented by an ASCII string. If
the value has a type that is represented by an ASCII string,
a length MUST be included. If the length given is not 0, it
should match the 'SRC ID Data Len' field sent in the KEK
payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiGmKekEntry 4 }
cgmGdoiGmKekSrcIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the identity information for the source of
a KEK SA with its type indicated by the
cgmGdoiGmKekSrcIdType. Use the cgmGdoiGmKekSrcIdType to parse
the KEK Source ID correctly. This ID value is sent as the 'SRC
Identification Data' of a KEK payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiGmKekEntry 5 }
cgmGdoiGmKekSrcIdPort OBJECT-TYPE
SYNTAX CgmGdoiUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value specifying a port associated with the source ID of
a KEK SA. A value of zero means that the port should
be ignored. This port value is sent as the `SRC ID Port`
field of a KEK payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiGmKekEntry 6 }
cgmGdoiGmKekDstIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for the dest. (multicast rekey address) of a
KEK SA. RFC 4306 defines all valid types that can be used
as an identifier. This identification type is sent as the
'DST ID Type' of the KEK payload."
REFERENCE
"RFC 3547 - Sections: 5.3. SA KEK payload
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiGmKekEntry 7 }
cgmGdoiGmKekDstIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of the destination ID of
a KEK SA. If no length is given (i.e. it has a value
of 0), the default length of its cgmGdoiGmKekDstIdType should be
used as long as it is not reprsented by an ASCII string. If
the value has a type that is represented by an ASCII string,
a length MUST be included. If the length given is not 0, it
should match the 'DST ID Data Len' field sent in the KEK
payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiGmKekEntry 8 }
cgmGdoiGmKekDstIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the identity information for the destination of
a KEK SA (multicast rekey address) with its type indicated by
cgmGdoiGmKekDstIdType. Use the cgmGdoiGmKekDstIdType to parse
the KEK Dest. ID correctly. This ID value is sent as the 'DST
Identification Data' of a KEK payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiGmKekEntry 9 }
cgmGdoiGmKekDstIdPort OBJECT-TYPE
SYNTAX CgmGdoiUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value specifying a port associated with the dest. ID of
a KEK SA. A value of zero means that the port should
be ignored. This port value is sent as the `DST ID Port`
field of a KEK payload."
REFERENCE "RFC 3547 - Sections: 5.3. SA KEK payload"
::= { cgmGdoiGmKekEntry 10 }
cgmGdoiGmKekIpProtocol OBJECT-TYPE
SYNTAX CgmGdoiIpProtocolId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the IP protocol ID (e.g. UDP/TCP) being used
for the rekey datagram."
REFERENCE "RFC 3547 - Section: 5.3. SA KEK payload"
::= { cgmGdoiGmKekEntry 11 }
cgmGdoiGmKekMgmtAlg OBJECT-TYPE
SYNTAX CgmGdoiKeyManagementAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KEK_MANAGEMENT_ALGORITHM which specifies
the group KEK management algorithm used to provide forward
or backward access control (i.e. used to exclude group
members).
KEK Management Type Value
------------------- -----
RESERVED 0
LKH 1
RESERVED 2-127
Private Use 128-255"
REFERENCE
"RFC 3547 - Section: 5.3.2. KEK_MANAGEMENT_ALGORITHM"
::= { cgmGdoiGmKekEntry 12 }
cgmGdoiGmKekEncryptAlg OBJECT-TYPE
SYNTAX CgmGdoiEncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KEK_ALGORITHM which specifies the
encryption algorithm used with the KEK SA. A GDOI
implementaiton must support KEK_ALG_3DES.
Following are the KEK encryption algoritm values defined in
the GDOI RFC 3547, however the CgmGdoiEncryptionAlgorithm TC
defines all possible values.
Algorithm Type Value
-------------- -----
RESERVED 0
KEK_ALG_DES 1
KEK_ALG_3DES 2
KEK_ALG_AES 3
RESERVED 4-127
Private Use 128-255"
REFERENCE "RFC 3547 - Section 5.3.3. KEK_ALGORITHM"
::= { cgmGdoiGmKekEntry 13 }
cgmGdoiGmKekEncryptKeyLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KEK_KEY_LENGTH which specifies the KEK
Algorithm key length (in bits)."
REFERENCE "RFC 3547 - Section: 5.3.4. KEK_KEY_LENGTH"
::= { cgmGdoiGmKekEntry 14 }
cgmGdoiGmKekSigHashAlg OBJECT-TYPE
SYNTAX CgmGdoiPseudoRandomFunction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the SIG_HASH_ALGORITHM which specifies the SIG
payload hash algorithm. This is not required (i.e. could
have a value of zero) if the SIG_ALGORITHM is SIG_ALG_DSS or
SIG_ALG_ECDSS, which imply SIG_HASH_SHA1 (i.e. must have a
value of zero or SIG_HASH_SHA1).
Following are the Signature Hash Algorithm values defined in
the GDOI RFC 3547, however the CgmGdoiPseudoRandomFunction TC
defines all possible values.
Algorithm Type Value
-------------- -----
RESERVED 0
SIG_HASH_MD5 1
SIG_HASH_SHA1 2
RESERVED 3-127
Private Use 128-255"
REFERENCE "RFC 3547 - Section: 5.3.6. SIG_HASH_ALGORITHM"
::= { cgmGdoiGmKekEntry 15 }
cgmGdoiGmKekSigAlg OBJECT-TYPE
SYNTAX CgmGdoiSignatureMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the SIG_ALGORITHM which specifies the SIG
payload signature algorithm. A GDOI implementation must
support SIG_ALG_RSA.
Following are the Signature Algorithm values defined in
the GDOI RFC 3547, however the CgmGdoiSignatureMethod TC
defines all possible values.
Algorithm Type Value
-------------- -----
RESERVED 0
SIG_ALG_RSA 1
SIG_ALG_DSS 2
SIG_ALG_ECDSS 3
RESERVED 4-127
Private Use 128-255"
REFERENCE "RFC 3547 - Section: 5.3.7. SIG_ALGORITHM"
::= { cgmGdoiGmKekEntry 16 }
cgmGdoiGmKekSigKeyLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the SIG_KEY_LENGTH which specifies the length
of the SIG payload key."
REFERENCE "RFC 3547 - Section 5.3.8. SIG_KEY_LENGTH"
::= { cgmGdoiGmKekEntry 17 }
cgmGdoiGmKekOakleyGroup OBJECT-TYPE
SYNTAX CgmGdoiDiffieHellmanGroup
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KE_OAKLEY_GROUP which specifies the OAKLEY
or Diffie-Hellman Group used to compute the PFS secret in the
optional KE payload of the GDOI GROUPKEY-PULL exchange."
REFERENCE "RFC 3547 - Section 5.3.9. KE_OAKLEY_GROUP"
::= { cgmGdoiGmKekEntry 18 }
cgmGdoiGmKekOriginalLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the KEK_KEY_LIFETIME which specifies the maximum
time for which a KEK is valid. The GCKS may refresh the KEK
at any time before the end of the valid period. The value is
a four (4) octet (32-bit) number defining a valid time period
in seconds."
REFERENCE "RFC 3547 - Section 5.3.5. KEK_KEY_LIFETIME"
::= { cgmGdoiGmKekEntry 19 }
cgmGdoiGmKekRemainingLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the remaining time for which a KEK is valid.
The value is a four (4) octet (32-bit) number which begins at
the value of cgmGdoiGmKekOriginalLifetime and counts down to 0
in seconds. If the lifetime has already expired, this value
should remain at zero (0) until the GCKS refreshes the KEK."
REFERENCE "RFC 3547 - Section 5.3.5. KEK_KEY_LIFETIME"
::= { cgmGdoiGmKekEntry 20 }
cgmGdoiGmKekStatus OBJECT-TYPE
SYNTAX CgmGdoiKekStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the KEK SA. When this status value is
queried, one of the following is returned:
inUse(1), new(2), old(3)."
::= { cgmGdoiGmKekEntry 21 }
-- #-------------------------------------------------------------- --
-- # The GDOI "Key Server (KS) TEK Selector" Table
-- #-------------------------------------------------------------- --
cgmGdoiKsTekSelectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiKsTekSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information regarding GDOI Traffic Encryption Key
(TEK) Selectors (source, destination, protocol information)
that is currently configured/pushed for GDOI entities
acting as Key Servers on the network device being queried.
There is one entry in this table for each TEK that has been
configured & pushed to Group Members registered to the given
Key Server."
::= { cgmGdoiSecAssociations 3 }
cgmGdoiKsTekSelectorEntry OBJECT-TYPE
SYNTAX CgmGdoiKsTekSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the Source/Destination attributes
associated with a GDOI TEK Policy, uniquely identified by the
Group ID, Key Server ID and TEK Selector index. There will be
one entry for each Source/Destination Policy sent by the given
Key Server to its registered Group Members, each with
a unique <SRC-ID, SRC-PORT, DST-ID, DST-PORT, SPI> 5-tuple.
However, due to the 255-octet constraint placed on an OID,
the <SRC-ID, SRC-PORT, DST-ID, DST-PORT> 4-tuple cannot be
used to INDEX a TEK entry for a given Group ID & Key Server
ID. Therefore, the TEK Selector index for a given Group ID &
Key Server ID MUST be unique. The TEK SPI is part of the TEK
Policy Table."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3.2. Messages
4. GROUPKEY-PUSH Message
5.4. SA TEK Payload"
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue,
cgmGdoiKeyServerIdType,
cgmGdoiKeyServerIdValue,
cgmGdoiKsTekSelectorIndex
}
::= { cgmGdoiKsTekSelectorTable 1 }
CgmGdoiKsTekSelectorEntry ::= SEQUENCE {
cgmGdoiKsTekSelectorIndex Unsigned32,
cgmGdoiKsTekSrcIdType CgmGdoiIdentificationType,
cgmGdoiKsTekSrcIdLength Unsigned32,
cgmGdoiKsTekSrcIdValue CgmGdoiIdentificationValue,
cgmGdoiKsTekSrcIdPort CgmGdoiUnsigned16,
cgmGdoiKsTekDstIdType CgmGdoiIdentificationType,
cgmGdoiKsTekDstIdLength Unsigned32,
cgmGdoiKsTekDstIdValue CgmGdoiIdentificationValue,
cgmGdoiKsTekDstIdPort CgmGdoiUnsigned16,
cgmGdoiKsTekSecurityProtocol CgmGdoiSecurityProtocol
}
cgmGdoiKsTekSelectorIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the Source/Destination tuple to be secured by the
KS TEK.The value of the index is a number which begins at
one and is incremented with each Source/Destination pair that
is to be secured by the KS TEK policy for that GDOI group."
::= { cgmGdoiKsTekSelectorEntry 1 }
cgmGdoiKsTekSrcIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for the source of a TEK Policy. RFC 4306
defines all valid types that can be used as an identifier.
This identification type is sent as the 'SRC ID Type' of
the TEK payload."
REFERENCE
"RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiKsTekSelectorEntry 2 }
cgmGdoiKsTekSrcIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of the source ID of
a TEK Policy. If no length is given (i.e. it has a value
of 0), the default length of its cgmGdoiKsTekSrcIdType should be
used as long as it is not reprsented by an ASCII string. If
the value has a type that is represented by an ASCII string,
a length MUST be included. If the length given is not 0, it
should match the 'SRC ID Data Len' field sent in the TEK
payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekSelectorEntry 3 }
cgmGdoiKsTekSrcIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the identity information for the source of
a TEK Policy with its type indicated by the
cgmGdoiKsTekSrcIdType. Use the cgmGdoiKsTekSrcIdType to parse
the TEK Source ID correctly. This ID value is sent as the 'SRC
Identification Data' of a TEK payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekSelectorEntry 4 }
cgmGdoiKsTekSrcIdPort OBJECT-TYPE
SYNTAX CgmGdoiUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value specifying a port associated with the source ID of
a TEK Policy. A value of zero means that the port should
be ignored. This port value is sent as the `SRC ID Port`
field of a TEK payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekSelectorEntry 5 }
cgmGdoiKsTekDstIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for the dest. of a TEK Policy. RFC 4306
defines all valid types that can be used as an identifier.
This identification type is sent as the 'DST ID Type' of
the TEK payload."
REFERENCE
"RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiKsTekSelectorEntry 6 }
cgmGdoiKsTekDstIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of the destination ID of
a TEK Policy. If no length is given (i.e. it has a value
of 0), the default length of its cgmGdoiKsTekDstIdType should be
used as long as it is not reprsented by an ASCII string. If
the value has a type that is represented by an ASCII string,
a length MUST be included. If the length given is not 0, it
should match the 'DST ID Data Len' field sent in the TEK
payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekSelectorEntry 7 }
cgmGdoiKsTekDstIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the identity information for the destination of
a TEK Policy with its type indicated by the
cgmGdoiKsTekDstIdType. Use the cgmGdoiKsTekDstIdType to parse
the TEK Dest. ID correctly. This ID value is sent as the 'DST
Identification Data' of a TEK payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekSelectorEntry 8 }
cgmGdoiKsTekDstIdPort OBJECT-TYPE
SYNTAX CgmGdoiUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value specifying a port associated with the dest. ID of
a TEK Policy. A value of zero means that the port should
be ignored. This port value is sent as the `DST ID Port`
field of a TEK payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekSelectorEntry 9 }
cgmGdoiKsTekSecurityProtocol OBJECT-TYPE
SYNTAX CgmGdoiSecurityProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Protocol-ID field of a SA TEK (SAT) payload
which specifies the Security Protocol for a TEK.
Following are the Security Protocol values defined in
the GDOI RFC 3547, however the CgmGdoiSecurityProtocol TC
defines all possible values.
Protocol ID Value
---------------------- -----
RESERVED 0
GDOI_PROTO_IPSEC_ESP 1
RESERVED 2-127
Private Use 128-255"
REFERENCE "RFC 3547 - Section: 5.4. SA TEK Payload"
::= { cgmGdoiKsTekSelectorEntry 10 }
-- #-------------------------------------------------------------- --
-- # The GDOI "Key Server (KS) TEK Policy" Table
-- #-------------------------------------------------------------- --
cgmGdoiKsTekPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiKsTekPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information regarding GDOI Traffic Encryption Key
(TEK) Policies currently configured/pushed for GDOI entities
acting as Key Servers on the network device being queried.
There is one entry in this table for each TEK that has been
configured & pushed to Group Members registered to the given
Key Server."
::= { cgmGdoiSecAssociations 4 }
cgmGdoiKsTekPolicyEntry OBJECT-TYPE
SYNTAX CgmGdoiKsTekPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the attributes associated with a GDOI TEK
Policy, uniquely identified by the Group ID, Key Server ID,
TEK Selector Index (Source/Destination IDs & Ports), and TEK
Policy Index (TEK SPI and direction). There will be one or
more TEK entries for each TEK Policy sent by the given Key
Server to its registered Group Members, each with a unique
<SRC-ID, SRC-PORT, DST-ID, DST-PORT, SPI> 5-tuple."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3.2. Messages
4. GROUPKEY-PUSH Message
5.4. SA TEK Payload"
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue,
cgmGdoiKeyServerIdType,
cgmGdoiKeyServerIdValue,
cgmGdoiKsTekSelectorIndex,
cgmGdoiKsTekPolicyIndex
}
::= { cgmGdoiKsTekPolicyTable 1 }
CgmGdoiKsTekPolicyEntry ::= SEQUENCE {
cgmGdoiKsTekPolicyIndex Unsigned32,
cgmGdoiKsTekSPI CgmGdoiTekSPI,
cgmGdoiKsTekEncapsulationMode CgmGdoiEncapsulationMode,
cgmGdoiKsTekEncryptionAlgorithm CgmGdoiEncryptionAlgorithm,
cgmGdoiKsTekEncryptionKeyLength Unsigned32,
cgmGdoiKsTekIntegrityAlgorithm CgmGdoiIntegrityAlgorithm,
cgmGdoiKsTekIntegrityKeyLength Unsigned32,
cgmGdoiKsTekWindowSize Unsigned32,
cgmGdoiKsTekOriginalLifetime Unsigned32,
cgmGdoiKsTekRemainingLifetime Unsigned32,
cgmGdoiKsTekStatus CgmGdoiTekStatus
}
cgmGdoiKsTekPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the policy that is used to secure the KS TEK.
The value of the index is a number which begins at
one and is incremented with each row in this table."
::= { cgmGdoiKsTekPolicyEntry 1 }
cgmGdoiKsTekSPI OBJECT-TYPE
SYNTAX CgmGdoiTekSPI
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Security Parameter Index (SPI) of a TEK
Policy. The SPI must be the SPI for ESP."
REFERENCE "RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekPolicyEntry 2 }
cgmGdoiKsTekEncapsulationMode OBJECT-TYPE
SYNTAX CgmGdoiEncapsulationMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Encapsulation Mode of a TEK (IPsec SA).
Following are the Encapsulation Mode values defined in
RFC 2407, however the CgmGdoiEncapsulationMode TC defines all
possible values.
Encapsulation Mode Value
------------------ -----
RESERVED 0
Tunnel 1
Transport 2"
REFERENCE
"RFC 2407 - Section: 4.5. IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekPolicyEntry 3 }
cgmGdoiKsTekEncryptionAlgorithm OBJECT-TYPE
SYNTAX CgmGdoiEncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Transform ID field of a PROTO_IPSEC_ESP
payload which specifies the ESP transform to be used. If
no encryption is used, this value will be zero (0).
Following are the ESP Transform values defined in RFC 2407,
however the CgmGdoiEncryptionAlgorithm TC defines all possible
values.
IPsec ESP Transform ID Value
------------------------ -----
RESERVED 0
ESP_DES_IV64 1
ESP_DES 2
ESP_3DES 3
ESP_RC5 4
ESP_IDEA 5
ESP_CAST 6
ESP_BLOWFISH 7
ESP_3IDEA 8
ESP_DES_IV32 9
ESP_RC4 10
ESP_NULL 11"
REFERENCE
"RFC 2407 - Section: 4.4.4. IPSEC ESP Transform Identifiers
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekPolicyEntry 4 }
cgmGdoiKsTekEncryptionKeyLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the key used for encryption in a TEK
(in bits)."
REFERENCE
"RFC 2407 - Section: 4.5 IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekPolicyEntry 5 }
cgmGdoiKsTekIntegrityAlgorithm OBJECT-TYPE
SYNTAX CgmGdoiIntegrityAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Authentication Algorithm for a TEK IPsec
ESP SA. If no authentication is used, this value will be
zero (0).
Following are the Authentication Algorithm values defined in
RFC 2407, however the CgmGdoiEncryptionAlgorithm TC defines all
possible values.
Algorithm Type Value
-------------- -----
HMAC-MD5 1
HMAC-SHA 2
DES-MAC 3
KPDK 4"
REFERENCE
"RFC 2407 - Section: 4.5. IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekPolicyEntry 6 }
cgmGdoiKsTekIntegrityKeyLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the key used for integrity/authentication in a
TEK (in bits)."
REFERENCE
"RFC 2407 - Section: 4.5 IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekPolicyEntry 7 }
cgmGdoiKsTekWindowSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "GROUPKEY-PUSH Messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the Time Based Anti-Replay (TBAR) window used by
this TEK Policy."
REFERENCE
"RFC 2407 - Section: 4.6.3.2. REPLAY-STATUS
RFC 3547 - Section: 6.3.4. Replay/Reflection Attack
Protection"
::= { cgmGdoiKsTekPolicyEntry 8 }
cgmGdoiKsTekOriginalLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the SA Life Type defined in RFC 2407 which
specifies the maximum time for which a TEK IPsec SA is valid.
The GCKS may refresh the TEK at any time before the end of
the valid period. The value is a four (4) octet (32-bit)
number defining a valid time period in seconds."
REFERENCE
"RFC 2407 - Section: 4.5 IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekPolicyEntry 9 }
cgmGdoiKsTekRemainingLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the remaining time for which a TEK is valid.
The value is a four (4) octet (32-bit) number which begins at
the value of cgmGdoiKsTekOriginalLifetime when the TEK is sent
and counts down to zero in seconds. If the lifetime has
already expired, this value should remain at zero (0) until
the Key Server refreshes the TEK."
REFERENCE
"RFC 2407 - Section: 4.5 IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiKsTekPolicyEntry 10 }
cgmGdoiKsTekStatus OBJECT-TYPE
SYNTAX CgmGdoiTekStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the TEK Policy. When this status value is
queried, one of the following is returned:
inbound(1), outbound(2), notInUse(3)."
::= { cgmGdoiKsTekPolicyEntry 11 }
-- #-------------------------------------------------------------- --
-- # The GDOI "Group Member (GM) TEK Selector" Table
-- #-------------------------------------------------------------- --
cgmGdoiGmTekSelectorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiGmTekSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information regarding GDOI Traffic Encryption Key
(TEK) Security Associations (SAs/Policies) pushed by a
Key Server & installed for GDOI entities acting as Group
Members (GMs) on the network device being queried. There is
one entry in this table for each unique TEK traffic selector
(Source/Destination tuple) that has been downloaded from the
Key Server and installed on the Group Member."
::= { cgmGdoiSecAssociations 5 }
cgmGdoiGmTekSelectorEntry OBJECT-TYPE
SYNTAX CgmGdoiGmTekSelectorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the attributes associated with a GDOI TEK
Policy/SA, uniquely identified by the Group ID, Group Member
ID, Source/Destination IDs & Ports, and TEK SPI. There will
be one or more TEK entries for each TEK Policy/SA received
and installed by the given Group Member from its registered
Key Server, each with a unique <SRC-ID, SRC-PORT, DST-ID,
DST-PORT, SPI> 5-tuple. This table does not contain the SPI
which is part of the TEK policy table."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3.2. Messages
4. GROUPKEY-PUSH Message
5.4. SA TEK Payload"
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue,
cgmGdoiGmIdType,
cgmGdoiGmIdValue,
cgmGdoiGmTekSelectorIndex
}
::= { cgmGdoiGmTekSelectorTable 1 }
CgmGdoiGmTekSelectorEntry ::= SEQUENCE {
cgmGdoiGmTekSelectorIndex Unsigned32,
cgmGdoiGmTekSrcIdType CgmGdoiIdentificationType,
cgmGdoiGmTekSrcIdLength Unsigned32,
cgmGdoiGmTekSrcIdValue CgmGdoiIdentificationValue,
cgmGdoiGmTekSrcIdPort CgmGdoiUnsigned16,
cgmGdoiGmTekDstIdType CgmGdoiIdentificationType,
cgmGdoiGmTekDstIdLength Unsigned32,
cgmGdoiGmTekDstIdValue CgmGdoiIdentificationValue,
cgmGdoiGmTekDstIdPort CgmGdoiUnsigned16,
cgmGdoiGmTekSecurityProtocol CgmGdoiSecurityProtocol
}
cgmGdoiGmTekSelectorIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the Source/Destination pair secured by the
GM TEK.The value of the index is a number which begins at
one and is incremented with each Source/Destination pair that
is secured by the GM TEK policy for that GDOI group."
::= { cgmGdoiGmTekSelectorEntry 1 }
cgmGdoiGmTekSrcIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for the source of a TEK Policy/SA. RFC 4306
defines all valid types that can be used as an identifier.
This identification type is sent as the 'SRC ID Type' of
the TEK payload."
REFERENCE
"RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiGmTekSelectorEntry 2 }
cgmGdoiGmTekSrcIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of the source ID of
a TEK Policy/SA. If no length is given (i.e. it has a value
of 0), the default length of its cgmGdoiGmTekSrcIdType should be
used as long as it is not reprsented by an ASCII string. If
the value has a type that is represented by an ASCII string,
a length MUST be included. If the length given is not 0, it
should match the 'SRC ID Data Len' field sent in the TEK
payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekSelectorEntry 3 }
cgmGdoiGmTekSrcIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the identity information for the source of
a TEK Policy/SA with its type indicated by the
cgmGdoiGmTekSrcIdType. Use the cgmGdoiGmTekSrcIdType to parse
the TEK Source ID correctly. This ID value is sent as the 'SRC
Identification Data' of a TEK payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekSelectorEntry 4 }
cgmGdoiGmTekSrcIdPort OBJECT-TYPE
SYNTAX CgmGdoiUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value specifying a port associated with the source ID of
a TEK Policy/SA. A value of zero means that the port should
be ignored. This port value is sent as the `SRC ID Port`
field of a TEK payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekSelectorEntry 5 }
cgmGdoiGmTekDstIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Identification Type Value used to parse the identity
information for the dest. of a TEK Policy/SA. RFC 4306
defines all valid types that can be used as an identifier.
This identification type is sent as the 'DST ID Type' of
the TEK payload."
REFERENCE
"RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP
RFC 4306 - Section: 3.5. Identification Payloads"
::= { cgmGdoiGmTekSelectorEntry 6 }
cgmGdoiGmTekDstIdLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length (i.e. number of octets) of the destination ID of
a TEK Policy/SA. If no length is given (i.e. it has a value
of 0), the default length of its cgmGdoiGmTekDstIdType should be
used as long as it is not reprsented by an ASCII string. If
the value has a type that is represented by an ASCII string,
a length MUST be included. If the length given is not 0, it
should match the 'DST ID Data Len' field sent in the TEK
payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekSelectorEntry 7 }
cgmGdoiGmTekDstIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the identity information for the destination of
a TEK Policy/SA with its type indicated by the
cgmGdoiGmTekDstIdType. Use the cgmGdoiGmTekDstIdType to parse
the TEK Dest. ID correctly. This ID value is sent as the 'DST
Identification Data' of a TEK payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekSelectorEntry 8 }
cgmGdoiGmTekDstIdPort OBJECT-TYPE
SYNTAX CgmGdoiUnsigned16
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value specifying a port associated with the dest. ID of
a TEK Policy/SA. A value of zero means that the port should
be ignored. This port value is sent as the `DST ID Port`
field of a TEK payload."
REFERENCE "RFC 3547 - Sections: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekSelectorEntry 9 }
cgmGdoiGmTekSecurityProtocol OBJECT-TYPE
SYNTAX CgmGdoiSecurityProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Protocol-ID field of a SA TEK (SAT) payload
which specifies the Security Protocol for a TEK.
Following are the Security Protocol values defined in
the GDOI RFC 3547, however the CgmGdoiSecurityProtocol TC
defines all possible values.
Protocol ID Value
---------------------- -----
RESERVED 0
GDOI_PROTO_IPSEC_ESP 1
RESERVED 2-127
Private Use 128-255"
REFERENCE "RFC 3547 - Section: 5.4. SA TEK Payload"
::= { cgmGdoiGmTekSelectorEntry 10 }
-- #-------------------------------------------------------------- --
-- # The GDOI "Group Member (GM) TEK Policy" Table
-- #-------------------------------------------------------------- --
cgmGdoiGmTekPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CgmGdoiGmTekPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information regarding GDOI Traffic Encryption Key
(TEK) Security Associations (SAs/Policies) received by a
Key Server & installed for GDOI entities acting as Group
Members (GMs) on the network device being queried. There is
one entry in this table for each TEK SA that has been
installed on the Group Member."
::= { cgmGdoiSecAssociations 6 }
cgmGdoiGmTekPolicyEntry OBJECT-TYPE
SYNTAX CgmGdoiGmTekPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the attributes associated with a GDOI TEK
Policy/SA, uniquely identified by the Group ID, Group Member
ID, TEK Selector (Source/Destination IDs & Ports), and TEK
Policy index (TEK SPI and direction). There will be one or
more TEK entries for each TEK Policy/SA received and installed
by the given Group Member from its registered Key Server, each
with a unique <SRC-ID, SRC-PORT, DST-ID, DST-PORT, SPI> tuple.
This table contains the SPI information corresponding to a TEK
Selector index."
REFERENCE
"RFC 3547 - Sections: 1. Introduction
3.2. Messages
4. GROUPKEY-PUSH Message
5.4. SA TEK Payload"
INDEX {
cgmGdoiGroupIdType,
cgmGdoiGroupIdValue,
cgmGdoiGmIdType,
cgmGdoiGmIdValue,
cgmGdoiGmTekSelectorIndex,
cgmGdoiGmTekPolicyIndex
}
::= { cgmGdoiGmTekPolicyTable 1 }
CgmGdoiGmTekPolicyEntry ::= SEQUENCE {
cgmGdoiGmTekPolicyIndex Unsigned32,
cgmGdoiGmTekSPI CgmGdoiTekSPI,
cgmGdoiGmTekEncapsulationMode CgmGdoiEncapsulationMode,
cgmGdoiGmTekEncryptionAlgorithm CgmGdoiEncryptionAlgorithm,
cgmGdoiGmTekEncryptionKeyLength Unsigned32,
cgmGdoiGmTekIntegrityAlgorithm CgmGdoiIntegrityAlgorithm,
cgmGdoiGmTekIntegrityKeyLength Unsigned32,
cgmGdoiGmTekWindowSize Unsigned32,
cgmGdoiGmTekOriginalLifetime Unsigned32,
cgmGdoiGmTekRemainingLifetime Unsigned32,
cgmGdoiGmTekStatus CgmGdoiTekStatus
}
cgmGdoiGmTekPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the SPI used to secure the GM TEK.The value of
the index is a number which begins at one and is incremented
with each row of the GM TEK SPI table."
::= { cgmGdoiGmTekPolicyEntry 1 }
cgmGdoiGmTekSPI OBJECT-TYPE
SYNTAX CgmGdoiTekSPI
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Security Parameter Index (SPI) of a TEK
Policy/SA. The SPI must be the SPI for ESP."
REFERENCE "RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekPolicyEntry 2 }
cgmGdoiGmTekEncapsulationMode OBJECT-TYPE
SYNTAX CgmGdoiEncapsulationMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Encapsulation Mode of a TEK (IPsec SA).
Following are the Encapsulation Mode values defined in
RFC 2407, however the CgmGdoiEncapsulationMode TC defines all
possible values.
Encapsulation Mode Value
------------------ -----
RESERVED 0
Tunnel 1
Transport 2"
REFERENCE
"RFC 2407 - Section: 4.5. IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekPolicyEntry 3 }
cgmGdoiGmTekEncryptionAlgorithm OBJECT-TYPE
SYNTAX CgmGdoiEncryptionAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Transform ID field of a PROTO_IPSEC_ESP
payload which specifies the ESP transform to be used. If
no encryption is used, this value will be zero (0).
Following are the ESP Transform values defined in RFC 2407,
however the CgmGdoiEncryptionAlgorithm TC defines all possible
values.
IPsec ESP Transform ID Value
------------------------ -----
RESERVED 0
ESP_DES_IV64 1
ESP_DES 2
ESP_3DES 3
ESP_RC5 4
ESP_IDEA 5
ESP_CAST 6
ESP_BLOWFISH 7
ESP_3IDEA 8
ESP_DES_IV32 9
ESP_RC4 10
ESP_NULL 11"
REFERENCE
"RFC 2407 - Section: 4.4.4. IPSEC ESP Transform Identifiers
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekPolicyEntry 4 }
cgmGdoiGmTekEncryptionKeyLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the key used for encryption in a TEK
(in bits)."
REFERENCE
"RFC 2407 - Section: 4.5 IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekPolicyEntry 5 }
cgmGdoiGmTekIntegrityAlgorithm OBJECT-TYPE
SYNTAX CgmGdoiIntegrityAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the Authentication Algorithm for a TEK IPsec
ESP SA. If no authentication is used, this value will be
zero (0).
Following are the Authentication Algorithm values defined in
RFC 2407, however the CgmGdoiEncryptionAlgorithm TC defines all
possible values.
Algorithm Type Value
-------------- -----
HMAC-MD5 1
HMAC-SHA 2
DES-MAC 3
KPDK 4"
REFERENCE
"RFC 2407 - Section: 4.5. IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekPolicyEntry 6 }
cgmGdoiGmTekIntegrityKeyLength OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of the key used for integrity/authentication in a
TEK (in bits)."
REFERENCE
"RFC 2407 - Section: 4.5 IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekPolicyEntry 7 }
cgmGdoiGmTekWindowSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "GROUPKEY-PUSH Messages"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of the Time Based Anti-Replay (TBAR) window used by
this TEK Policy/SA."
REFERENCE
"RFC 2407 - Section: 4.6.3.2. REPLAY-STATUS
RFC 3547 - Section: 6.3.4. Replay/Reflection Attack
Protection"
::= { cgmGdoiGmTekPolicyEntry 8 }
cgmGdoiGmTekOriginalLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the SA Life Type defined in RFC 2407 which
specifies the maximum time for which a TEK IPsec SA is valid.
The GCKS may refresh the TEK at any time before the end of
the valid period. The value is a four (4) octet (32-bit)
number defining a valid time period in seconds."
REFERENCE
"RFC 2407 - Section: 4.5 IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekPolicyEntry 9 }
cgmGdoiGmTekRemainingLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the remaining time for which a TEK is valid.
The value is a four (4) octet (32-bit) number which begins at
the value of cgmGdoiGmTekOriginalLifetime and counts down to 0
in seconds. If the lifetime has already expired, this value
should remain at zero (0) until the GCKS refreshes the TEK."
REFERENCE
"RFC 2407 - Section: 4.5 IPSEC Security Assoc. Attributes
RFC 3547 - Section: 5.4.1. PROTO_IPSEC_ESP"
::= { cgmGdoiGmTekPolicyEntry 10 }
cgmGdoiGmTekStatus OBJECT-TYPE
SYNTAX CgmGdoiTekStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the TEK Policy/SA. When this status value is
queried, one of the following is returned:
inbound(1), outbound(2), notInUse(3)."
::= { cgmGdoiGmTekPolicyEntry 11 }
-- #-------------------------------------------------------------- --
-- # The GDOI Notification Control Table
-- #-------------------------------------------------------------- --
cgmGdoiKSNewRegNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether or not a notification should be
generated on a Key Server when a new Group
Member begins registration to a GDOI group."
::= { cgmGdoiNotifCntl 1 }
cgmGdoiKSRegCompNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether or not a notification should be
generated on a Key Server when a new Group
Member successfully registers to a GDOI group."
::= { cgmGdoiNotifCntl 2 }
cgmGdoiKSRekeyPushNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether or not a notification should be
generated on a Key Server when a rekey is sent
to a GDOI group."
::= { cgmGdoiNotifCntl 3 }
cgmGdoiKSNoRSANotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether or not an error notification should
be generated on a Key Server when an RSA
key is not set up."
::= { cgmGdoiNotifCntl 4 }
cgmGdoiGMRegNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not a notification should be
generated on a Group Member when it starts
registration to a Key Server in a GDOI group."
::= { cgmGdoiNotifCntl 5 }
cgmGdoiGmRegCompNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not a notification should be
generated on a Group Member when it
successfully registers to a Key Server in
a GDOI group."
::= { cgmGdoiNotifCntl 6 }
cgmGdoiGmReRegNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not a notification should be
generated on a Group Member when it starts
to re-register to a Key Server in a GDOI group."
::= { cgmGdoiNotifCntl 7 }
cgmGdoiGmRekeyRecNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not a notification should be
generated on a Group Member when it receives
and processes a rekey sent by a Key Server in
a GDOI group."
::= { cgmGdoiNotifCntl 8 }
cgmGdoiGmIncompCfgNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not an error notification should
be generated on a Group Member when there is
missing information for configuring a GDOI group."
::= { cgmGdoiNotifCntl 9 }
cgmGdoiGmNoIpSecFlowsNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not an error notification should
be generated on a Group Member when no more
security associations can be installed after receiving
a rekey from a Key Server in a GDOI group."
::= { cgmGdoiNotifCntl 10 }
cgmGdoiGmRekeyFailNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not an error notification should
be generated on a Group Member when it is unable
to successfully process and install a rekey."
::= { cgmGdoiNotifCntl 11 }
cgmGdoiKsRoleChangeNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not cgmGdoiKeyServerRoleChange
notification should be generated on a Key Server when its role
changes from Primary to Secondary or vice-versa."
::= { cgmGdoiNotifCntl 12 }
cgmGdoiKsGmDeletedNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not cgmGdoiKeyServerGmDeleted notification
should be generated on a Key Server when a Group Member is
deleted from the group database."
::= { cgmGdoiNotifCntl 13 }
cgmGdoiKsPeerReachNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not cgmGdoiKeyServerPeerReachable
notification should be generated on a Key Server when
unreachable peer Key Server becomes reachable."
::= { cgmGdoiNotifCntl 14 }
cgmGdoiKsPeerUnreachNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not cgmGdoiKeyServerPeerUnreachable
notification should be generated on a Key Server when reachable
peer Key Server becomes unreachable."
::= { cgmGdoiNotifCntl 15 }
cgmGdoiNotifGroupIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. This variable captures
the identification type of the GDOI group."
::= { cgmGdoiNotifVars 1 }
cgmGdoiNotifGroupIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. The value of a Group ID
with its type indicated by the cgmGdoiNotifGroupIdType. Use the
cgmGdoiNotifGroupIdType to parse the value of this field
correctly."
::= { cgmGdoiNotifVars 2 }
cgmGdoiNotifGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. The string-readable name
configured for or given to a GDOI Group."
::= { cgmGdoiNotifVars 3 }
cgmGdoiNotifKeyServerIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. The Identification Type
Value used to parse the identity information of a Key Server."
::= { cgmGdoiNotifVars 4 }
cgmGdoiNotifKeyServerIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. The value of the identity
information for a Key Server with its type indicated by the
cgmGdoiNotifKeyServerIdType. Use the cgmGdoiNotifKeyServerIdType
to parse the Key Server ID correctly."
::= { cgmGdoiNotifVars 5 }
cgmGdoiNotifKeyServerRole OBJECT-TYPE
SYNTAX CgmGdoiKsRole
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. The current role of the
Key Server for the Group."
::= { cgmGdoiNotifVars 6 }
cgmGdoiNotifGmIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. The Identification Type
Value used to parse the identity information for a Initiator or
Group Member."
::= { cgmGdoiNotifVars 7 }
cgmGdoiNotifGmIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. The value of the identity
information for a Group Member with its type indicated by the
cgmGdoiNotifGmIdType. Use the cgmGdoiNotifGmIdType to parse the
Group Member ID's value correctly."
::= { cgmGdoiNotifVars 8 }
cgmGdoiNotifPeerKsIdType OBJECT-TYPE
SYNTAX CgmGdoiIdentificationType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. The Identification Type
Value used to parse the identity information of a Key Server."
::= { cgmGdoiNotifVars 9 }
cgmGdoiNotifPeerKsIdValue OBJECT-TYPE
SYNTAX CgmGdoiIdentificationValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Variable used only for notifications. The value of the identity
information for a Peer Key Server with its type indicated by the
cgmGdoiNotifPeerKsIdType. Use the cgmGdoiNotifPeerKsIdType to
parse the Peer Key Server ID correctly."
::= { cgmGdoiNotifVars 10 }
-- ------------------------------------------------------------------ --
-- GDOI MIB Conformance & Compliance Information
-- ------------------------------------------------------------------ --
--
-- *---------------------------------------------------------------- --
-- * GDOI MIB Conformance Information
-- *---------------------------------------------------------------- --
cgmGdoiMIBGroups OBJECT IDENTIFIER
::= { cgmGdoiMIBConformance 1 }
cgmGdoiMIBCompliances OBJECT IDENTIFIER
::= { cgmGdoiMIBConformance 2 }
-- #-------------------------------------------------------------- --
-- # GDOI MIB Units/Groups of Conformance
-- #-------------------------------------------------------------- --
cgmGdoiGroupIdGroup OBJECT-GROUP
OBJECTS {
cgmGdoiGroupIdLength,
cgmGdoiGroupName
}
STATUS current
DESCRIPTION
"This group consists of:
1) GDOI Group Table
cgmGdoiGroupIdGroupRev1 is an extension to this group."
::= { cgmGdoiMIBGroups 1 }
cgmGdoiKeyServerGroup OBJECT-GROUP
OBJECTS {
cgmGdoiKeyServerIdLength,
cgmGdoiKeyServerActiveKEK,
cgmGdoiKeyServerRekeysPushed
}
STATUS current
DESCRIPTION
"This group consists of:
1) GDOI Key Server Table
cgmGdoiKeyServerGroupRev1 is an extension to this group."
::= { cgmGdoiMIBGroups 2 }
cgmGdoiGmGroup OBJECT-GROUP
OBJECTS {
cgmGdoiGmIdLength,
cgmGdoiGmRegKeyServerIdType,
cgmGdoiGmRegKeyServerIdLength,
cgmGdoiGmRegKeyServerIdValue,
cgmGdoiGmActiveKEK,
cgmGdoiGmRekeysReceived
}
STATUS current
DESCRIPTION
"This group consists of:
1) GDOI GM Table
cgmGdoiGmGroupRev1 is an extension to this group."
::= { cgmGdoiMIBGroups 3 }
cgmGdoiKsSecurityAssociationsGroup OBJECT-GROUP
OBJECTS {
cgmGdoiKsKekSPI,
cgmGdoiKsKekSrcIdType,
cgmGdoiKsKekSrcIdLength,
cgmGdoiKsKekSrcIdValue,
cgmGdoiKsKekSrcIdPort,
cgmGdoiKsKekDstIdType,
cgmGdoiKsKekDstIdLength,
cgmGdoiKsKekDstIdValue,
cgmGdoiKsKekDstIdPort,
cgmGdoiKsKekIpProtocol,
cgmGdoiKsKekMgmtAlg,
cgmGdoiKsKekEncryptAlg,
cgmGdoiKsKekEncryptKeyLength,
cgmGdoiKsKekSigHashAlg,
cgmGdoiKsKekSigAlg,
cgmGdoiKsKekSigKeyLength,
cgmGdoiKsKekOakleyGroup,
cgmGdoiKsKekOriginalLifetime,
cgmGdoiKsKekRemainingLifetime,
cgmGdoiKsKekStatus,
cgmGdoiKsTekSrcIdType,
cgmGdoiKsTekSrcIdLength,
cgmGdoiKsTekSrcIdValue,
cgmGdoiKsTekSrcIdPort,
cgmGdoiKsTekDstIdType,
cgmGdoiKsTekDstIdLength,
cgmGdoiKsTekDstIdValue,
cgmGdoiKsTekDstIdPort,
cgmGdoiKsTekSecurityProtocol,
cgmGdoiKsTekSPI,
cgmGdoiKsTekEncapsulationMode,
cgmGdoiKsTekEncryptionAlgorithm,
cgmGdoiKsTekEncryptionKeyLength,
cgmGdoiKsTekIntegrityAlgorithm,
cgmGdoiKsTekIntegrityKeyLength,
cgmGdoiKsTekWindowSize,
cgmGdoiKsTekOriginalLifetime,
cgmGdoiKsTekRemainingLifetime,
cgmGdoiKsTekStatus
}
STATUS current
DESCRIPTION
"This group consists of:
1) GDOI Key Server KEK Policy/SA Table
2) GDOI Key Server TEK Policy Table"
::= { cgmGdoiMIBGroups 4 }
cgmGdoiGmSecurityAssociationsGroup OBJECT-GROUP
OBJECTS {
cgmGdoiGmKekSPI,
cgmGdoiGmKekSrcIdType,
cgmGdoiGmKekSrcIdLength,
cgmGdoiGmKekSrcIdValue,
cgmGdoiGmKekSrcIdPort,
cgmGdoiGmKekDstIdType,
cgmGdoiGmKekDstIdLength,
cgmGdoiGmKekDstIdValue,
cgmGdoiGmKekDstIdPort,
cgmGdoiGmKekIpProtocol,
cgmGdoiGmKekMgmtAlg,
cgmGdoiGmKekEncryptAlg,
cgmGdoiGmKekEncryptKeyLength,
cgmGdoiGmKekSigHashAlg,
cgmGdoiGmKekSigAlg,
cgmGdoiGmKekSigKeyLength,
cgmGdoiGmKekOakleyGroup,
cgmGdoiGmKekOriginalLifetime,
cgmGdoiGmKekRemainingLifetime,
cgmGdoiGmKekStatus,
cgmGdoiGmTekSrcIdType,
cgmGdoiGmTekSrcIdLength,
cgmGdoiGmTekSrcIdValue,
cgmGdoiGmTekSrcIdPort,
cgmGdoiGmTekDstIdType,
cgmGdoiGmTekDstIdLength,
cgmGdoiGmTekDstIdValue,
cgmGdoiGmTekDstIdPort,
cgmGdoiGmTekSecurityProtocol,
cgmGdoiGmTekSPI,
cgmGdoiGmTekEncapsulationMode,
cgmGdoiGmTekEncryptionAlgorithm,
cgmGdoiGmTekEncryptionKeyLength,
cgmGdoiGmTekIntegrityAlgorithm,
cgmGdoiGmTekIntegrityKeyLength,
cgmGdoiGmTekWindowSize,
cgmGdoiGmTekOriginalLifetime,
cgmGdoiGmTekRemainingLifetime,
cgmGdoiGmTekStatus
}
STATUS current
DESCRIPTION
"This group consists of:
1) GDOI Group Member KEK Policy/SA Table
2) GDOI Group Member TEK Policy/SA Table"
::= { cgmGdoiMIBGroups 5 }
cgmGdoiKeyServerNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cgmGdoiKeyServerNewRegistration,
cgmGdoiKeyServerRegistrationComplete,
cgmGdoiKeyServerRekeyPushed
}
STATUS current
DESCRIPTION
"This group contains the Key Server (GCKS) notifications
for the GDOI MIB.
cgmGdoiKeyServerNotificationGroupRev1 is an extension to this
group."
::= { cgmGdoiMIBGroups 6 }
cgmGdoiKeyServerErrorNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { cgmGdoiKeyServerNoRsaKeys }
STATUS current
DESCRIPTION
"This group contains the Key Server (GCKS) error notifications
for the GDOI MIB."
::= { cgmGdoiMIBGroups 7 }
cgmGdoiGmNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cgmGdoiGmRegister,
cgmGdoiGmRegistrationComplete,
cgmGdoiGmReRegister,
cgmGdoiGmRekeyReceived
}
STATUS current
DESCRIPTION
"This group contains the Group Member (GM) notifications
for the GDOI MIB."
::= { cgmGdoiMIBGroups 8 }
cgmGdoiGmErrorNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cgmGdoiGmIncompleteCfg,
cgmGdoiGmNoIpSecFlows,
cgmGdoiGmRekeyFailure
}
STATUS current
DESCRIPTION
"This group contains the Group Member (GM) error notifications
for the GDOI MIB."
::= { cgmGdoiMIBGroups 9 }
cgmGdoiNotificationControlGroup OBJECT-GROUP
OBJECTS {
cgmGdoiKSNewRegNotifEnable,
cgmGdoiKSRegCompNotifEnable,
cgmGdoiKSRekeyPushNotifEnable,
cgmGdoiKSNoRSANotifEnable,
cgmGdoiGMRegNotifEnable,
cgmGdoiGmRegCompNotifEnable,
cgmGdoiGmReRegNotifEnable,
cgmGdoiGmRekeyRecNotifEnable,
cgmGdoiGmIncompCfgNotifEnable,
cgmGdoiGmNoIpSecFlowsNotifEnable,
cgmGdoiGmRekeyFailNotifEnable
}
STATUS current
DESCRIPTION
"This group contains the GDOI notification control objects
for the GDOI MIB.
cgmGdoiNotificationControlGroupRev1 is an extension to this
group."
::= { cgmGdoiMIBGroups 10 }
cgmGdoiGroupIdGroupRev1 OBJECT-GROUP
OBJECTS {
cgmGdoiGroupMemberCount,
cgmGdoiGroupActivePeerKeyServerCount,
cgmGdoiGroupLastRekeyRetransmits,
cgmGdoiGroupLastRekeyTimeTaken
}
STATUS current
DESCRIPTION
"This group consists of:
1) GDOI Group Table
This group is an extension to cgmGdoiGroupIdGroup."
::= { cgmGdoiMIBGroups 11 }
cgmGdoiKeyServerGroupRev1 OBJECT-GROUP
OBJECTS {
cgmGdoiKeyServerRole,
cgmGdoiKeyServerRegisteredGMs
}
STATUS current
DESCRIPTION
"This group consists of:
1) GDOI Key Server Table
This group is an extension to cgmGdoiKeyServerGroup."
::= { cgmGdoiMIBGroups 12 }
cgmGdoiGmGroupRev1 OBJECT-GROUP
OBJECTS { cgmGdoiGmActiveTEKNum }
STATUS current
DESCRIPTION
"This group consists of:
1) GDOI GM Table
This group is an extension to cgmGdoiGmGroup."
::= { cgmGdoiMIBGroups 13 }
cgmGdoiKeyServerNotificationGroupRev1 NOTIFICATION-GROUP
NOTIFICATIONS {
cgmGdoiKeyServerRoleChange,
cgmGdoiKeyServerGmDeleted,
cgmGdoiKeyServerPeerReachable,
cgmGdoiKeyServerPeerUnreachable
}
STATUS current
DESCRIPTION
"This group contains the Key Server (GCKS) notifications for the
GDOI MIB.
This group is an extension to
cgmGdoiKeyServerNotificationGroup."
::= { cgmGdoiMIBGroups 14 }
cgmGdoiNotificationControlGroupRev1 OBJECT-GROUP
OBJECTS {
cgmGdoiKsRoleChangeNotifEnable,
cgmGdoiKsGmDeletedNotifEnable,
cgmGdoiKsPeerReachNotifEnable,
cgmGdoiKsPeerUnreachNotifEnable
}
STATUS current
DESCRIPTION
"This group contains the GDOI notification control objects
for the GDOI MIB.
This group is an extension to cgmGdoiNotificationControlGroup."
::= { cgmGdoiMIBGroups 15 }
cgmGdoiCoopPeerGroup OBJECT-GROUP
OBJECTS {
cgmGdoiCoopPeerIdLength,
cgmGdoiCoopPeerRole,
cgmGdoiCoopPeerStatus,
cgmGdoiCoopPeerRegisteredGMs
}
STATUS current
DESCRIPTION
"This group consists of:
1) COOP Peer Key Server Table"
::= { cgmGdoiMIBGroups 16 }
cgmGdoiNotificationVariablesGroup OBJECT-GROUP
OBJECTS {
cgmGdoiNotifGroupIdType,
cgmGdoiNotifGroupIdValue,
cgmGdoiNotifGroupName,
cgmGdoiNotifKeyServerIdType,
cgmGdoiNotifKeyServerIdValue,
cgmGdoiNotifKeyServerRole,
cgmGdoiNotifGmIdType,
cgmGdoiNotifGmIdValue,
cgmGdoiNotifPeerKsIdType,
cgmGdoiNotifPeerKsIdValue
}
STATUS current
DESCRIPTION
"This group contains the GDOI notification variables for the
GDOI MIB."
::= { cgmGdoiMIBGroups 17 }
-- #-------------------------------------------------------------- --
-- # GDOI MIB Compliance Statements
-- #-------------------------------------------------------------- --
cgmGdoiMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"At minimum, only GDOI Group Member functionality is required so
only objects associated with and needed by Group Members are
mandatory to implement. If Key Server functionality is also
implemented, all other objects will need to be implemented as
well.
This group is deprecated and is superseeded by
cgmGdoiMIBCompliance1."
MODULE -- this module
MANDATORY-GROUPS {
cgmGdoiGroupIdGroup,
cgmGdoiGmSecurityAssociationsGroup,
cgmGdoiGmGroup
}
GROUP cgmGdoiKeyServerGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports being the Group Controller Key Server (GCKS)."
GROUP cgmGdoiKsSecurityAssociationsGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports being the Group Controller Key Server (GCKS)."
GROUP cgmGdoiKeyServerNotificationGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications & being the GCKS."
GROUP cgmGdoiKeyServerErrorNotificationGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications & being the GCKS."
GROUP cgmGdoiGmNotificationGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications."
GROUP cgmGdoiGmErrorNotificationGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications."
GROUP cgmGdoiNotificationControlGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications."
::= { cgmGdoiMIBCompliances 1 }
cgmGdoiMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"At minimum, only GDOI Group Member functionality is required so
only objects associated with and needed by Group Members are
mandatory to implement. If Key Server functionality is also
implemented, all other objects will need to be implemented as
well.
Updated the conformance group with new MIB Groups and objects
with min-access as read-only."
MODULE -- this module
MANDATORY-GROUPS {
cgmGdoiGroupIdGroup,
cgmGdoiGroupIdGroupRev1,
cgmGdoiGmSecurityAssociationsGroup,
cgmGdoiGmGroup,
cgmGdoiGmGroupRev1
}
GROUP cgmGdoiKeyServerGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports being the Group Controller Key Server (GCKS)."
GROUP cgmGdoiKeyServerGroupRev1
DESCRIPTION
"Implementation of this group is for any network device
that supports being the Group Controller Key Server (GCKS), this
group is an extension of cgmGdoiKeyServerGroup."
GROUP cgmGdoiKsSecurityAssociationsGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports being the Group Controller Key Server (GCKS)."
GROUP cgmGdoiKeyServerNotificationGroup
DESCRIPTION
"Implementation of this group is for any network device that
supports the sending of notifications & being the GCKS."
GROUP cgmGdoiKeyServerNotificationGroupRev1
DESCRIPTION
"Implementation of this group is for any network device that
supports the sending of notifications & being the GCKS, this
group is an extension of cgmGdoiKeyServerNotificationGroup."
GROUP cgmGdoiKeyServerErrorNotificationGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications & being the GCKS."
GROUP cgmGdoiGmNotificationGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications."
GROUP cgmGdoiGmErrorNotificationGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications."
GROUP cgmGdoiNotificationControlGroup
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications."
GROUP cgmGdoiNotificationControlGroupRev1
DESCRIPTION
"Implementation of this group is for any network device
that supports the sending of notifications, this group is an
extension to cgmGdoiNotificationControlGroup."
GROUP cgmGdoiCoopPeerGroup
DESCRIPTION
"Implementation of this group is for any network device that
supports the COOP."
GROUP cgmGdoiNotificationVariablesGroup
DESCRIPTION
"Implementation of this group is for any network device that
supports the sending of notifications, packed with the
variables defined as a part of the said table."
OBJECT cgmGdoiKSNewRegNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cgmGdoiKSRegCompNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cgmGdoiKSRekeyPushNotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cgmGdoiKSNoRSANotifEnable
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cgmGdoiMIBCompliances 2 }
END
There are no management objects defined in this MIB module that have a MAX-ACCESS clause of read-write and/or read-create. So, if this MIB module is implemented correctly, then there is no risk that an intruder can alter or create any management objects of this MIB module via direct SNMP SET operations.
Some of the readable objects in this MIB module (i.e., objects with a MAX-ACCESS other than not-accessible) may be considered sensitive or vulnerable in some network environments. It is thus important to control even GET and/or NOTIFY access to these objects and possibly to even encrypt the values of these objects when sending them over the network via SNMP. The GDOI MIB deals with a security protocol and is not a general MIB, all information reported by any of the GDOI MIB queries should be considered sensitive. However, the most sensitive information dealing directly with security associations and algorithms are:
SNMP versions prior to SNMPv3 did not include adequate security. Even if the network itself is secure (for example by using IPsec), even then, there is no control as to who on the secure network is allowed to access and GET/SET (read/change/create/delete) the objects in this MIB module.
It is RECOMMENDED that implementers consider the security features as provided by the SNMPv3 framework (see [RFC3410], section 8), including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to enable cryptographic security. It is then a customer/operator responsibility to ensure that the SNMP entity giving access to an instance of this MIB module is properly configured to give access to the objects only to those principals (users) that have legitimate rights to indeed GET or SET (change/create/delete) them.
IANA has assigned OID "759" under mib-2 for CISCO-GDOI-MIB.
The following individuals made substantial contributions to the first version of this memo.
Kavitha Kamarthy
Cisco Systems
170 W. Tasman Drive
San Jose, California 95134-1706
USA
Phone: +1-408-525-1209
Email: kavithac@cisco.com
Mike Hamada
Cisco Systems
170 W. Tasman Drive
San Jose, California 95134-1706
USA
Phone: +1-408-525-7473
Email: michamad@cisco.com
Preethi Sundaradevan
Cisco Systems
170 W. Tasman Drive
San Jose, California 95134-1706
USA
Phone: +1-408-424-4713
Email: prsundar@cisco.com
Sheela Rowles
Cisco Systems
170 W. Tasman Drive
San Jose, California 95134-1706
USA
Phone: +1-408-527-7677
Email: sheela@cisco.com
Tanya Roosta
Cisco Systems
170 W. Tasman Drive
San Jose, California 95134-1706
USA
Phone: +1-510-220-0047
Email: roosta@cisco.com
| [RFC3410] | Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction and Applicability Statements for Internet-Standard Management Framework", RFC 3410, DOI 10.17487/RFC3410, December 2002. |
| [RFC2629] | Rose, M., "Writing I-Ds and RFCs using XML", RFC 2629, DOI 10.17487/RFC2629, June 1999. |
| [RFC4181] | Heard, C., "Guidelines for Authors and Reviewers of MIB Documents", BCP 111, RFC 4181, DOI 10.17487/RFC4181, September 2005. |