| Network Working Group | E. Lear |
| Internet-Draft | J. Henry |
| Intended status: Experimental | Cisco Systems |
| Expires: April 23, 2019 | October 20, 2018 |
Network QoS Expectations Extensions for MUD
draft-lear-opsawg-mud-bw-profile-00
Manufacturer Usage Descriptions (MUD) are a means by which devices can establish expectations about how they are intended to behave, and how the network should treat them. Earlier work focused on access control. This draft specifies a means by which manufacturers can express to deployments what form of bandwidth profile devices are expected to have with respect to specific services.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on April 23, 2019.
Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Devices connecting to networks will often exhibit certain nominal behaviors that can be described. In addition, sometimes device require particular network behaviors such as appropriate quality-of-service treatment. Manufacturer Usage Descriptions [I-D.ietf-opsawg-mud] discuss how to characterize access control requirements, for instance. As just mentioned, access control requirements are not the only requirements device manufacturers may wish to specify. This memo defines an extension to the MUD YANG model by which manufacturers can characterize the traffic exchanged with a Thing, and specify how much bandwidth is required by a device or may be expected of a device over some period of time for each given service it uses.
Network deployments may use this information in two ways:
The basis of the model is that services may be identified by access-lists, and that each service can then be assigned an attendant bandwidth expectation in terms of either bits-per-second or packets-per-second. In addition, a DSCP marking can be specified.
When a service is identified by access lists, each access list is appended to the existing access list entries. N.B., as a reminder, acl names in MUD files are scoped solely to those files, and may conflict with acl names in other MUD files.
A luminaire may require a few packets per minute of a predictable payload size (e.g. keepalives), and may expect that traffic to be sent in the background, as one or more keepalive packet loss would not impede the luminaire functions. Additionally, when a virtual ‘light switch’ changes its state, a burst of 3 to 4 packets over a well-defined port are expected, with a QoS marking of OAM. Last, occasional firmware updates may bring an exchange of a few kilobytes marked as best effort.
A smoke detector may require at most 1 packet per second at best effort (keepalive), except when there is a problem, at which point it may send a frame upstream to a specific port and of a specified payload size, with a DSCP marking of EF.
A coffee maker may be designed never set DSCP to anything other than AF13 (even when it’s empty, perish the thought), nor may it ever use more than 5 packets of 120 bytes payload per minute, even if it has a fault.
A different coffee maker may be designed to set DSCP to EF if the it has caught fire.
Not every device can be easily profiled. Not every service on every device may be easily profiled. A manufacturer may use this extension to describe those services that are easily profile, and omit services that the device offers or uses that are not easily profiled. The local deployment is cautioned not to assume that a service not profiled is in some way anomalous, even when other services are.
The MUD manager remains a key component of this system. To begin with, it is the component that retrieves the MUD file, and would identify the extension. From that point, different implementation decisions can be made. For instance, the MUD manager or associated infrastructure can retain the mapping between devices and MUD-URLs. A dispatch function could be implemented wherever that mapping is housed, such that either enforcement or monitoring functions can be invoked. Enforcement functions would almost certainly begin with some form of telemetry on access switches, routers or firewalls. That same telemetry might be exported to an IPFIX analyzer [RFC7011] that might report anomalies.
To extend MUD the “qos” extension is added as an element to the “extensions” node when a MUD file is generated.
The model augmentation appears as follows:
module: ietf-mud-bw-profile
augment /mud:mud/mud:to-device-policy:
+--rw bw-params
+--rw service* [name]
+--rw name string
+--rw timeframe uint32
+--rw pps? uint32
+--rw bps? uint64
+--rw dscp? inet:dscp
+--rw aclname? -> /acl:acls/acl/name
augment /mud:mud/mud:from-device-policy:
+--rw bw-params
+--rw service* [name]
+--rw name string
+--rw timeframe uint32
+--rw pps? uint32
+--rw bps? uint64
+--rw dscp? inet:dscp
+--rw aclname? -> /acl:acls/acl/name
<CODE BEGINS>file "ietf-mud-bw-profile@2018-10-20.yang"
module ietf-mud-bw-profile {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-mud-bw-profile";
prefix mud-qos;
import ietf-access-control-list {
prefix acl;
}
import ietf-inet-types {
prefix inet;
}
import ietf-mud {
prefix mud;
}
organization
"IETF OPSAWG (Ops Area) Working Group";
contact
"WG Web: http://tools.ietf.org/wg/opsawg/
WG List: opsawg@ietf.org
Author: Eliot Lear
lear@cisco.com
Author: Jerome Henry
jerhenry@cisco.com
";
description
"This YANG module augments the ietf-mud model to provide the
network with some understanding as to the QoS requirements and
anticipated behavior of a device.
The to-device-policy and from-device-policy containers are
augmented with one additional container, which expresses how many
packets per second a device is expected to transmit, how much
bandwidth it is expected to use, and what QoS is required, and
how much bandwidth is to be expected to be prioritized. An
access-list is further specified to indicate how QoS should be
marked on ingress and egress.
Copyright (c) 2016,2017,2018 IETF Trust and the persons
identified as the document authors. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD
License set forth in Section 4.c of the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2018-10-20 {
description
"Initial proposed standard.";
reference "RFC XXXX: QoS for MUD Specification";
}
grouping mud-qos-params {
description
"QoS and Bandwidth additions for MUD";
container bw-params {
description
"Expected Bandwidth to/from device";
list service {
key "name";
description
"a list of services that are being described.";
leaf name {
type string;
description
"Service Name";
}
leaf timeframe {
type uint32;
mandatory true;
description
"the period of time in seconds one
expects a service to burst at described rates";
}
leaf pps {
type uint32;
description
"number of packets per second to be expected.";
}
leaf bps {
type uint64;
description
"number of bits per second to be expected.";
}
leaf dscp {
type inet:dscp;
description
"The DSCP that packets for this service should
treated with. N.B., just because the manufacturer
wants this, doesn't mean it will get it. However,
manufacturers who do set the DSCP value in their
packets SHOULD indicate that in this description.
This field differs from the dscp field in the matches
portion of the access-list in that here the field is
populated when the manufacturer states what the nominal
value of the DSCP field MAY be, and how much bandwidth
can be used when it is set. Note that it is possible
that the same service may use multiple DSCP values,
depending on the circumstances. In this case, service
entry MUST be made.";
}
leaf aclname {
type leafref {
path "/acl:acls/acl:acl/acl:name";
}
description
"The name of the ACL that will match packets
for a given service.";
}
}
}
}
augment "/mud:mud/mud:to-device-policy" {
description
"add inbound QoS parameters";
uses mud-qos-params;
}
augment "/mud:mud/mud:from-device-policy" {
description
"add outbound QoS parameters";
uses mud-qos-params;
}
}
<CODE ENDS>
TBD
An attacking manufacturer claims a device would require substantial bandwidth or QoS for use. This attack would be effected when a device is installed into a local deployment and its MUD file interpreted. The impact of a device demanding excessive bandwidth could be overprovisioning of the network or denial of service to other uses.
This attack is remediated by a human being reviewing the bandwidth consumption projections suggested by the MUD file when they are in some way beyond the norm for any device being installed.
If the device is emitting a MUD-URL via insecure, it is possible for an attacker to modify it. Devices emitting such URLs should already receive additional scrutiny from administrators as they are onboarded. This mechanism SHOULD NOT be used to admit devices into privileged queues without them having been securely admitted to the network, through means such as IEEE 802.1X.
The IANA is requested to add “qos” to the MUD extensions registry as follows:
Extension Name: MUD Standard reference: This document
| [I-D.ietf-opsawg-mud] | Lear, E., Droms, R. and D. Romascanu, "Manufacturer Usage Description Specification", Internet-Draft draft-ietf-opsawg-mud-25, June 2018. |
| [RFC7011] | Claise, B., Trammell, B. and P. Aitken, "Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of Flow Information", STD 77, RFC 7011, DOI 10.17487/RFC7011, September 2013. |
Draft -00: