Extensions to Automatic Certificate Management Environment for email TLS
draft-melnikov-acme-email-tls-00

Abstract

This document specifies identifiers and challenges required to enable the Automated Certificate Management Environment (ACME) to issue certificates for use by TLS email services.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on December 9, 2017.

Copyright Notice

Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

• 1. Introduction
• 2. Conventions Used in This Document
• 3. Use of ACME for use by TLS-protected SMTP and IMAP services
• 3.1. "service" JWS header parameter
• 3.2. "port" JWS header parameter
• 3.3. TLS with Server Name Indication (SNI) challenge for email services
• 3.4. DNS challenge for email services
• 3.5. CAPABILITY challenge for email services
• 4. Open Issues
• 5. IANA Considerations
• 6. Security Considerations
• 7. Normative References
• Author's Address

1. Introduction

[I-D.ietf-acme-acme] is a mechanism for automating certificate management on the Internet. It enables administrative entities to prove effective control over resources like domain names, and automates the process of generating and issuing certificates.

This document describes extensions to ACME for use by email services. Section 3 defines extensions for how email services (such as SMTP, IMAP) can get certificates for use with TLS.

2. Conventions Used in This Document

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

3. Use of ACME for use by TLS-protected SMTP and IMAP services

SMTP [RFC5321] (including SMTP submission) and IMAP [RFC3501] servers use TLS to provide server identity authentication, data confidentiality and integrity services. Such TLS protected email services either use STARTTLS command or run on a separate TLS-protected port.

[I-D.ietf-acme-acme] defines several challenge types that can be extended for use by email services. This document also defines some new challenge types specific to SMTP and IMAP.

In order to use these challenges JWS [RFC7515] object used by [I-D.ietf-acme-acme] is extended. The following extra requirements are in addition to requirements on JWS objects sent in ACME defined in Section 6.2 of [I-D.ietf-acme-acme]:

1. "service" JWS header parameter MUST be included. See Section 3.1 for more details.
2. "port" JWS header parameter MUST (SHOULD?) be included. See Section 3.2 for more details.

For example, if the client were to respond to the "tls-sni-email-00" challenge, it would send the following request:

   POST /acme/authz/asdf/0 HTTP/1.1
   Host: example.com
   Content-Type: application/jose+json

   {
     "protected": base64url({
       "alg": "ES256",
       "kid": "https://example.com/acme/acct/1",
       "nonce": "Q_s3MWoqT05TrdkM2MTDcw",
       "url": "https://example.com/acme/authz/asdf/0",
       "service": "smtp",
       "port": 25
     }),
     "payload": base64url({
       "type": "tls-sni-email-00",
       "keyAuthorization": "IlirfxKKXA...vb29HhjjLPSggQiE"
     }),
     "signature": "7cbg5JO1Gf5YLjjF...SpkUfcdPai9uVYYU"
   }

Figure 1

3.1. "service" JWS header parameter

The "service" JWS header parameter specifies the service for which TLS server certificate should be issued. Valid values come from "Service Names and Transport Protocol Port Numbers" IANA registry <https://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml>. ACME server MAY include SRV-ID [RFC6125] subjectAltNames in issued certificates.

3.2. "port" JWS header parameter

The "port" JWS header parameter specifies the TCP port number where the corresponding service is running.

[[This parameter might have applicability beyond email services.]]

3.3. TLS with Server Name Indication (SNI) challenge for email services

"tls-sni-email-00" is very similar to "tls-sni-01" defined in Section 8.3 of [I-D.ietf-acme-acme].

The difference between processing of "tls-sni-email-00" and "tls-sni-01" are listed below:

1. SAN A MUST be constructed as follows: compute the SHA-256 digest [FIPS180-4] of the challenge token and encode it in lowercase hexadecimal form. The dNSName is "<x>.<y>.<token>.acme.invalid", where <x> is the first half of the hexadecimal representation and <y> is the second half, and <token> was generated by the ACME server. SAN B MUST be constructed as follows: compute the SHA-256 digest of the key authorization and encode it in lowercase hexadecimal form. The dNSName is "<x>.<y>.<ka>.acme.invalid" where <x> is the first half of the hexadecimal representation and <x> is the second half, and <ka> is the key authorization. [[OPEN ISSUE: Should service name and port number be incorporated into SAN A and B?]]
2. When verifying the client's control of the domain/service, ACME server connects to port as specified in "port" JWS header parameter (Section 3.2), instead of port 443. When connecting to ports 25, 143 and 587, ACME server needs to use STARTTLS command. When connecting to ports 465 or 993, ACME server initiate TLS negotiation immediately upon connection to the corresponding ports. In all cases ACME server presents SAN A in the SNI field, constructed as specified above.

3.4. DNS challenge for email services

"dns-email-00" is very similar to "dns-01" defined in Section 8.4 of [I-D.ietf-acme-acme].

The difference between processing of "dns-email-00" and "dns-01" are listed below:

1. The TXT record used to validate this challenge is _<port>._<service>_acme-challenge.<domain>. For example, for domain "example.com" and IMAP service running on port 993, the TXT record name is _993._imaps._acme-challenge.example.com. For domain "example.net" and IMAP service running on port 143, the TXT record name is _143._imap._acme-challenge.example.next.
2. [[OPEN ISSUE: Should service name and port number be incorporated into the hash?]]

3.5. CAPABILITY challenge for email services

For "capability-smtp-00" challenge, ACME client (== SMTP server) constructs a key authorization from the "token" value provided in the challenge and the client's account key. The client then computes the SHA-256 digest [FIPS180-4] of the key authorization. SMTP server than returns the base64url encoding of this digest as a value of the "ACME" EHLO capability:

250-smtp.example.com
250-SIZE
250-8BITMIME
250-BINARYMIME
250-PIPELINING
250-HELP
250-DSN
250-CHUNKING
250-AUTH SCRAM-SHA-1
250-AUTH=SCRAM-SHA-1
250-STARTTLS
250-ACME gfj9Xq...Rg85nM
250-MT-PRIORITY
250 ENHANCEDSTATUSCODES

Figure 2

Similarly, "capability-imap-00" challenge, ACME client (== IMAP server) constructs a key authorization from the "token" value provided in the challenge and the client's account key. The client then computes the SHA-256 digest [FIPS180-4] of the key authorization. SMTP server than returns the base64url encoding of this digest as a value of the "ACME" capability:

* OK [CAPABILITY IMAP4rev1 LOGINDISABLED LITERAL+ ENABLE STARTTLS ACME=gfj9Xq...Rg85nM] Example IMAP4rev1 server ready

 or

* CAPABILITY IMAP4rev1 LOGINDISABLED LITERAL+ ENABLE STARTTLS ACME=gfj9Xq...Rg85nM

Figure 3

4. Open Issues

[[This section should be empty before publication]]

1. One possible alternative for issuing TLS certificates for email services is to define a new Identifier Type that specifies service@domain. The current version of the document just reuses "dns".

5. IANA Considerations

IANA is requested to register the following ACME challenge types that are used with Identifier Type "dns": "tls-sni-email", "dns-email", "capability-smtp" and "capability-imap". The reference for all of them is this document.

6. Security Considerations

TBD.

7. Normative References

Author's Address