Message Authorizing Email Header Field and its use for Draft & Release
draft-melnikov-mmhs-authorizing-users-09

Abstract

This document describes a procedure for when an Military Message Handling System (MMHS) message is composed by one user and is only released to the mail transfer system when one or more authorizing users authorize release of the message by adding the MMHS-Authorizing-Users header field. The resulting message can be optionally signed by the sender and/or reviewer, allowing recipients to verify both the original signature (if any) and review signatures.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on June 18, 2016.

Copyright Notice

Copyright (c) 2015 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

• 1. Introduction
• 2. Conventions Used in This Document
• 3. Draft and Release procedure
• 3.1. Terminology
• 3.2. Handling of Initial Message Submission by MSA
• 3.3. Review by Authorizing User(s)
• 3.3.1. Processing of Encrypted Messages
• 3.3.2. Authorizing S/MIME signatures
• 3.4. Role of other Messaging Agents at the sender's domain
• 3.4.1. MDA at the sender's domain
• 3.4.2. Border MTA at the sender's domain
• 4. MMHS-Authorizing-Users header field
• 5. Updated MIXER mapping
• 5.1. Mapping from RFC 5322/MIME to X.400
• 5.2. Mapping from X.400 to RFC 5322/MIME
• 6. IANA Considerations
• 7. Security Considerations
• 7.1. Forged Header Fields
• 7.2. Intentionally Malformed Header Fields
• 8. References
• 8.1. Normative References
• 8.2. Informative References
• Appendix A. Acknowledgements
• Author's Address

1. Introduction

In some secure environments email messages can't be released to the MTS (Message Transfer System) and, thus delivered to recipients, unless they are authorized by one or more authorizing users (e.g. Releasing Officers or Release Authorities). This document describes how this mechanism can be realized by an additional Internet Email [RFC5322] header field and optionally protected using S/MIME [RFC5750] [RFC5751] or DKIM [RFC6376].

This document describes a procedure for how an email message composed by one user can be released to the MTS when one or more authorizing users authorize and optionally countersign the message. The MMHS-Authorizing-Users header field (see Section 4) communicates which user(s) authorized the message. If S/MIME signed, the resulting message allows recipients to verify both the original (if any) and counter signatures. The original S/MIME signature generated by the sender (if any) should be unaffected by additional S/MIME review signatures.

2. Conventions Used in This Document

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

The formal syntax uses the Augmented Backus-Naur Form (ABNF) [RFC5234] notation including the core rules defined in Appendix B of RFC 5234 [RFC5234]. Terms not defined in this document are taken from [RFC5322].

3. Draft and Release procedure

3.1. Terminology

Drafter: Any email user that composes a message (Draft Message) needing authorisation before it is released to its intended recipients.

Authorizing User (also Releaser or Authorizer): The mailbox of a user or a group of users that must inspect and authorise the release of Draft Message before it can be sent. An organization may require more than one Authorizing User to authorize release of a Draft Message.

3.2. Handling of Initial Message Submission by MSA

The original email message to be sent doesn't include the MMHS-Authorizing-Users header field. It may or may not include sender's S/MIME signature.

The message to be sent is first submitted over SMTP [RFC6409]. The specific mechanism for how it arrives to authorizing user(s) is not specified in this document. One possibility is for the Message Submission Agent (MSA) to redirect all email messages not addressed to authorizing users and not submitted by authorizing users to a preconfigured mailbox(es) that can be accessed by authorizing user(s). Another possibility is for the MSA to redirect all email messages without the MMHS-Authorizing-Users header field and/or corresponding S/MIME review signatures to a preconfigured mailbox(es) that can be accessed by authorizing user(s).

In order to prevent a malicious sender from bypassing or altering Draft and Release procedure, MSA MUST check that MMHS-Authorizing-Users header field (if present) is syntactically valid, contains email addresses of entities authorized to act as authorizing users and, when review signatures are used, that every entity listed has one or more matching review signature (or signature) which is valid.

3.3. Review by Authorizing User(s)

Each user agent that is used by an authorized user MUST perform the following steps (if there are multiple authorizing users, these steps are repeated for each):

1. Verify the origination of the message. The exact mechanism to do that is out of scope for this document, but one example is by verifying the S/MIME signature and making sure that it matches the sender of the message, as described in [RFC5750] [RFC5751]. Another example is by verifying a DKIM signature [RFC6376] that covers From/Sender header fields.
2. Check if the message already contains the MMHS-Authorizing-Users header field with the email address of the authorizing user. (This can happen, for example, if email system is misconfigured and thus contains a loop, or if a malicious sender or attacker is trying to affect authorization procedure.) If the message doesn't contain the email address of the authorizing user in the MMHS-Authorizing-Users header field, then go to the next step. If MMHS-Authorizing-Users header field contains the email address of the authorizing user, verify validity of the header field (for example by checking for S/MIME signature/review signature or for DKIM signature). If the validity of the MMHS-Authorizing-Users header field can be verified, go to step 5 below. Otherwise strip the MMHS-Authorizing-Users header field or return the message to sender (bounce).
3. Allow the authorizing user to review content of the message. Some of the checks can be automated (for example search for keywords). (See Section 3.3.1 for additional considerations.) If based on the check the authorizing user is happy to release the message to MTS (or to the next authorizing user, if multiple authorizations are required), the UA SHOULD enable the authorizing user to protect additions to the MMHS-Authorizing-Users header field, for example by allowing to add S/MIME review signature (if S/MIME is used for protecting MMHS-Authorizing-Users header field. See Section 3.3.2 for more details). If the authorizing user wants to reject the message, it SHOULD be returned to sender with an explanatory note or can be discarded. The authorizing user can also choose to forward the message to another authorizing user for approval.
4. If there is an existing MMHS-Authorizing-Users header field containing the email address of the authorizing user, skip this step. Otherwise, insert a new MMHS-Authorizing-Users header field (if absent) containing the email address of the authorizing user or append the email address of the authorizing user to the end of the existing MMHS-Authorizing-Users header field.
5. The (possibly) updated email message is either released to the MTS, or to the next authorizing user, as per email system configuration. Note that if the authorizing user updates the message in a manner that invalidates existing S/MIME/DKIM signature(s), the authorizing user becomes the Drafter, and need to reapply any protections.

3.3.1. Processing of Encrypted Messages

Any encrypted message sent in an environment where Draft and Release procedure is in force needs to be also encrypted to all authorizing users, so that they can perform review of the message. A message that can't be decrypted by an authorizing user MUST be returned to sender.

3.3.2. Authorizing S/MIME signatures

If S/MIME were not used, the Authorizing User can become the original signer of the message.

If a message is signed multiple times (for example using different cryptographic algorithms), all of the signatures that can be verified by an authorizing user SHOULD be signed with a review signature (authorizing signatures). A recipient of the message can consider any chain of review signatures that matches MMHS-Authorizing-Users header field values as valid, only if all signatures in the chain verify.

When triple wrapping [RFC2634] is used, authorizing signatures are applied to the outer level, so that it can be verified by MTAs without the need to decrypt content.

3.4. Role of other Messaging Agents at the sender's domain

3.4.1. MDA at the sender's domain

If a message being sent is to be delivered within the sender's domain, Message Delivery Agents (MDAs) are responsible for ensuring that the message was properly authorized by authorizing user(s), as determined by the sender's domain email system configuration. They verify presence and validity of MMHS-Authorizing-Users header field in the message, as well as validity of associated signatures on the message.

Note that the above requirements don't apply to direct delivery to any user designated as an Authorizing User.

3.4.2. Border MTA at the sender's domain

Sender's domain border MTAs are responsible for ensuring that all messages that leave sender's domain were properly authorized by authorizing user(s), as determined by the sender's domain email system configuration. They verify presence and validity of MMHS-Authorizing-Users header field in outgoing messages, as well as validity of associated signatures on the message.

4. MMHS-Authorizing-Users header field

The MMHS-Authorizing-Users header field specifies the list of authorizing users (or entities(*)) that countersigned this email message (for example using S/MIME) before it was authorized for release to MTS. Each user/entity is described by her/his/its email address.

(*) Note that in some environments identities of authorizing users are required to be hidden from recipients of email messages, so upon receipt MMHS-Authorizing-Users might contain an email address associated with a group of possible users.

The MMHS-Authorizing-Users header field specified in this document MUST NOT appear more than once in message headers. (An email message that contains multiple MMHS-Authorizing-Users is malformed. An agent processing such malformed message SHOULD either return it to sender (if possible) or fix the message so that it only contains one copy of the header field.)

  
    MMHS-Authorizing-Users = "MMHS-Authorizing-Users:"
                       mailbox-list CRLF
    
    mailbox-list = <Defined in RFC 5322>

5. Updated MIXER mapping

This section updates MIXER mapping specified in [RFC2156].

5.1. Mapping from RFC 5322/MIME to X.400

In the absence of the MMHS-Authorizing-Users header field, From and Sender header fields are mapped to their X.400 equivalents as specified in [RFC2156].

If MMHS-Authorizing-Users header field is present:

1. The first From header field address is mapped to IPMS.Heading.originator if there is no Sender header field and the remaining From header field addresses + the MMHS-Authorizing-Users header field address(es) are mapped to IPMS.Heading.authorizing-users. If a Sender header field is present, the From header field address(es) and the MMHS-Authorizing-Users header field address(es) are mapped to IPMS.Heading.authorizing-users.
2. The Sender header field (if present) is mapped to IPMS.Heading.originator.

5.2. Mapping from X.400 to RFC 5322/MIME

Mapping from X.400 to Internet is controlled by whether or not a particular message is considered to be a military message. A message is considered to be a military message (as defined by ACP 123 [ACP123] and also specified in STANAG 4406 [STANAG-4406]) if there are any MMHS heading extensions present. Alternatively, this MAY be done by configuration (i.e. all messages can be considered to be military messages).

For non military messages, mapping from X.400 as specified in [RFC2156] is used.

For military messages, the following mapping is used:

1. IPMS.Heading.originator is mapped to From header field.
2. The IPMS.Heading.authorizing-users is mapped to MMHS-Authorizing-Users header field.

6. IANA Considerations

IANA is requested to add the MMHS-Authorizing-Users header field specified in Section 4 to the "Permanent Message Header Field Names", defined by Registration Procedures for Message Header Fields [RFC3864]. The registration template is as follows:

Header field name: MMHS-Authorizing-Users

Applicable protocol: mail ([RFC5322])

Status: Standard

Author/Change controller: IETF

Specification document(s): [[RFC XXXX]]

Related information:

7. Security Considerations

7.1. Forged Header Fields

A malicious sender may add/change an MMHS-Authorizing-Users header field to bypass or alter the message authorization procedure invoked for messages with no MMHS-Authorizing-Users header field. For that reason it is important for agents and clients that rely on the validity of the MMHS-Authorizing-Users header field to also verify the review signature (or a similar protection mechanism), that confirms that a particular person or entity authorized release of a message.

7.2. Intentionally Malformed Header Fields

It is possible for an attacker to add an MMHS-Authorizing-Users header field that is extraordinarily large or otherwise malformed in an attempt to discover or exploit weaknesses in header field parsing code. Implementations MUST thoroughly verify all such header fields received from MTAs and be robust against intentionally as well as unintentionally malformed header fields.

8. References

8.1. Normative References

8.2. Informative References

Appendix A. Acknowledgements

Many thanks for reviews and text provided by Steve Kille, Jim Schaad, Russ Housley, David Wilson and Chris Bonatti.

Some text in this document was copied from RFC 7001.

Author's Address