| Internet-Draft | SCRAM 2FA extensions | May 2021 |
| Melnikov | Expires 25 November 2021 | [Page] |
This specification describes an extension to family of Simple Authentication and Security Layer (SASL; RFC 4422) authentication mechanisms called the Salted Challenge Response Authentication Mechanism (SCRAM), which provides support for 2 factor authentication.¶
This specification also gives an example of how TOTP (RFC 6238) can be used as the second factor.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 25 November 2021.¶
Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶
SCRAM [RFC5802] is a password based SASL [RFC4422] authentication mechanism that provides (among other things) mutual authentication and binding to an external security layer such as TLS.¶
Two-factor authentication (2FA) is a way to add additional security to an authentication exchange. The first "factor" is a password. The second "factor" is a verification code retrieved from an application on a mobile device or computer. 2FA is conceptually similar to a security token device that banks in some countries require for online banking. Other names for 2FA systems include OTP (one-time password) and TOTP (Time-based One-time Password algorithm, such as [RFC6238]).¶
This specification describes an extension to SCRAM to provide 2 factor authentication. SCRAM already relies on passwords for authentication. This document specifies how second "factors" can be incorporated into SCRAM authentication.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].¶
Formal syntax is defined by [RFC5234] including the core rules defined in Appendix B of [RFC5234].¶
Example lines prefaced by "C:" are sent by the client and ones prefaced by "S:" by the server. If a single "C:" or "S:" label applies to multiple lines, then the line breaks between those lines are for editorial clarity only, and are not part of the actual protocol exchange.¶
This document uses several terms defined in [RFC4949] ("Internet Security Glossary") including the following: authentication, authentication exchange, authentication information, brute force, challenge-response, cryptographic hash function, dictionary attack, eavesdropping, hash result, keyed hash, man-in-the-middle, nonce, one-way encryption function, password, replay attack and salt. Readers not familiar with these terms should use that glossary as a reference. Other terms defined in [RFC5802] are also used in this document.¶
This document reuses notation defined in SCRAM.¶
This extension doesn't add any extra roundtrips to SCRAM authentication. SCRAM was designed to be extensible, so it allows for optional and mandatory attributes, which covered by MAC codes. Second "factors" are conveyed in the second message ("client-final-message-without-proof" ABNF production) sent from the client to the server.¶
This extension doesn't change how the client authenticates the server.¶
The server authenticates the client after receiving the second message as described in Section 3 of [RFC5802] If the client included "type" and "second-factor" attributes defined in this document (see Section 4) and the server supports the specified second factor type, the server verifies content of the "second-factor" according to the "type". If the second factor verification fails, the server MUST fail authentication and SHOULD return either "replayed-second-factor" or "invalid-second-factor" error in the "e" attribute. [[It would be possible to make the extra attributes mandatory by using SCRAM's "m=", but the text above doesn't do that.]]¶
This document defines the following new SCRAM attributes:¶
The following syntax specification uses the Augmented Backus-Naur Form (ABNF) notation as specified in [RFC5234].¶
type = "t=" type-value
; Complies with "attr-val" syntax.
type-value = "totp" / value
; Type of second factor.
; Should be registered with IANA.
second-factor = "f=" second-factor-value
; Complies with "attr-val" syntax.
second-factor-value = 6DIGIT / value
; 6DIGIT when "t=totp"
server-error-value-ext =
"replayed-second-factor" /
"invalid-second-factor" /
"second-factor-value-missing"
value = <as defined in RFC 5802>
¶
When TOTP is used with SCRAM, the following values for "t" and "f" attributes (see Section 4 for their generic syntax) are used:¶
A TOTP URI is specified with the following ABNF:¶
totp-uri = "otpauth" "://" "totp/" label "?secret=" secret
"&issuer=" issuer
label = issuer (":" / "%3A") identity
identity = 1*CHAR ; URI-encoded SASL identity
secret = 40 * HEXCHAR ; Base32 (hex) encoded secret with no padding.
issuer = 1*CHAR ; Issuer name.
¶
The following example extends the example from Section 5 of [RFC5802] to demonstrate use of TOTP:¶
C: n,,n=user,r=fyko+d2lbbFgONRv9qkxdawL
S: r=fyko+d2lbbFgONRv9qkxdawL3rfcNHYJY1ZVvWVs7j,s=QSXCR+Q6sek8bf92,
i=4096
C: c=biws,r=fyko+d2lbbFgONRv9qkxdawL3rfcNHYJY1ZVvWVs7j,
t=totp,f=776804,p=v0X8v3Bz2T0CJGbJQyF0X+HI4Ts=
S: v=lz59pqV8S7suAoZWja4dJRkFsKQ=
¶
Please note that TOTP extension described in this document works in the same way with SCRAM-SHA-256/SCRAM-SHA-256-PLUS and SCRAM-SHA-512/SCRAM-SHA-512-PLUS variants of SCRAM.¶
Simon Josefsson: should this be a new SASL mechanism name, e.g. CROTP-SHA-256?¶
Simon Josefsson: cookie option for fast reauthentication? Alexey: can do or just used CLIENT-KEY (draft-cridland-kitten-clientkey)?¶
Rick van Rein: specify a HOTP variant as well?¶
Rick van Rein: use TOTP with 6 or 8 digits? Register both variants?¶
Unless an external security layer (such as TLS) is also used, the OTP value is sent in unencrypted/unhashed form from the client to the server, which allows an attacker to read the OTP value and perform a race with the server to validate the OTP.¶
TBD¶
IANA is requested to update the definition of the SASL family SCRAM in the SASL Mechanism registry established by [RFC4422] to also point to this document.¶
IANA is also requested to create a new subregistry of "SASL mechanism" for registering second factor schemes used in the "t" attribute as specified in this document.¶
The registration template is as follows:¶
SCRAM Second Factor Scheme Name: Pointer to specification text: Notes (optional):¶
The registration procedure for the above subregistry is Expert Review.¶
IANA is requested to register a new value in the subregistry defined above:¶
SCRAM Second Factor Scheme Name: TOTP Pointer to specification text: [[ this document ]] Notes (optional): (none)¶
Thank you to Stephen Farrell for motivating creation of this document and to Dave Cridland for describing how TOTP can be used with XMPP in XEP-400. Thank you to Rick van Rein and Simon Josefsson for comments and corrections, but all final errors in this document remain mine.¶