| Dispatch Working Group | P. Dunkley |
| Internet-Draft | G. Llewellyn |
| Updates: 4975, 4976 (if approved) | Acision |
| Intended status: Standards Track | V. Pascual |
| Expires: July 30, 2015 | A. Roman |
| Quobis | |
| G. Salgueiro | |
| Cisco | |
| January 26, 2015 |
The WebSocket Protocol as a Transport for the Message Session Relay Protocol (MSRP)
draft-pd-dispatch-msrp-websocket-07
The WebSocket protocol enables two-way real-time communication between clients and servers in situations where direct access to TCP and UDP are not available (for example, from within Javascript in a web browser). This document specifies a new WebSocket sub-protocol as a reliable transport mechanism between MSRP (Message Session Relay Protocol) clients and relays to enable usage of MSRP in new scenarios. This document normatively updates RFC 4975 and RFC 4976.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on July 30, 2015.
Copyright (c) 2015 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
The WebSocket [RFC6455] protocol enables message exchange between clients and servers on top of a persistent TCP connection (optionally secured with TLS [RFC5246]). The initial protocol handshake makes use of HTTP [RFC2616] semantics, allowing the WebSocket protocol to reuse existing HTTP infrastructure.
Modern web browsers include a WebSocket client stack complying with the WebSocket API [WS-API] as specified by the W3C. It is expected that other client applications (those running in personal computers and devices such as smart-phones) will also make a WebSocket client stack available. The specification in this document enables usage of MSRP in these scenarios.
This specification defines a new WebSocket sub-protocol (as defined in section 1.9 in [RFC6455]) for transporting MSRP messages between a WebSocket client and MSRP relay [RFC4976] containing a WebSocket server, a new transport for MSRP, and procedures for MSRP clients and relays implementing the WebSocket transport.
MSRP over WebSocket is well suited for MSRP interactions between clients and servers. Common use cases for MSRP over WebSocket include:
MSRP-CEMA [RFC6714] is outside of the scope of this document as this document is intended to describe connecting to a WebSocket server that is an MSRP relay.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
The WebSocket protocol [RFC6455] is a transport layer on top of TCP (optionally secured with TLS [RFC5246]) in which both client and server exchange message units in both directions. The protocol defines a connection handshake, WebSocket sub-protocol and extensions negotiation, a frame format for sending application and control data, a masking mechanism, and status codes for indicating disconnection causes.
The WebSocket connection handshake is based on HTTP [RFC2616] and utilizes the HTTP GET method with an "Upgrade" request. This is sent by the client and then answered by the server (if the negotiation succeeded) with an HTTP 101 status code. Once the handshake is completed the connection upgrades from HTTP to the WebSocket protocol. This handshake procedure is designed to reuse the existing HTTP infrastructure. During the connection handshake, client and server agree on the application protocol to use on top of the WebSocket transport. Such application protocol (also known as a "WebSocket sub-protocol") defines the format and semantics of the messages exchanged by the endpoints. This could be a custom protocol or a standardized one (such as the WebSocket MSRP sub-protocol defined in this document). Once the HTTP 101 response is processed both client and server reuse the underlying TCP connection for sending WebSocket messages and control frames to each other. Unlike plain HTTP, this connection is persistent and can be used for multiple message exchanges.
WebSocket defines message units to be used by applications for the exchange of data, so it provides a message boundary-preserving transport layer. These message units can contain either UTF-8 text or binary data, and can be split into multiple WebSocket text/binary transport frames as needed by the WebSocket stack.
The term WebSocket sub-protocol refers to an application-level protocol layered on top of a WebSocket connection. This document specifies the WebSocket MSRP sub-protocol for carrying MSRP requests and responses through a WebSocket connection.
The MSRP WebSocket Client and MSRP WebSocket Server negotiate usage of the WebSocket MSRP sub-protocol during the WebSocket handshake procedure as defined in section 1.3 of [RFC6455]. The Client MUST include the value "msrp" in the Sec-WebSocket-Protocol header in its handshake request. The 101 reply from the Server MUST contain "msrp" in its corresponding Sec-WebSocket-Protocol header.
GET / HTTP/1.1 Host: a.example.com Upgrade: websocket Connection: Upgrade Sec-WebSocket-Key: dGhlIHNhbXBsZSBub25jZQ== Origin: http://www.example.com Sec-WebSocket-Protocol: msrp Sec-WebSocket-Version: 13
Below is an example of a WebSocket handshake in which the Client requests the WebSocket MSRP sub-protocol support from the Server:
HTTP/1.1 101 Switching Protocols Upgrade: websocket Connection: Upgrade Sec-WebSocket-Accept: s3pPLMBiTxaQ9kYGzzhZRbK+xOo= Sec-WebSocket-Protocol: msrp
The handshake response from the Server accepting the WebSocket MSRP sub-protocol would look as follows:
Once the negotiation has been completed, the WebSocket connection is established and can be used for the transport of MSRP requests and responses. The WebSocket messages transmitted over this connection MUST conform to the negotiated WebSocket sub-protocol.
WebSocket messages can be transported in either UTF-8 text frames or binary frames. MSRP [RFC4975] allows both text and binary bodies in MSRP requests. Therefore MSRP WebSocket Clients and Servers MUST accept both text and binary frames.
WebSocket clients cannot receive WebSocket connections initiated by other WebSocket clients or WebSocket servers. This means that it is impossible for an MSRP client to communicate directly with other MSRP clients. Therefore, all MSRP over WebSocket messages MUST be routed via an MSRP WebSocket Server.
MSRP WebSocket Servers can be used to route MSRP messages between MSRP WebSocket Clients, and between MSRP WebSocket Clients and "normal" MSRP clients and relays.
Each MSRP chunk MUST be carried within a single WebSocket message, and a WebSocket message MUST NOT contain more than one MSRP chunk.
This document defines the value "ws" as the transport parameter value for an MSRP URI [RFC3986] to be contacted using the MSRP WebSocket sub-protocol as transport.
transport = "tcp" / "ws" / 1*ALPHANUM
The updated augmented BNF (Backus-Naur Form) [RFC5234] for this parameter is the following (the original BNF for this parameter can be found in [RFC4975]):
This document does not define a new SDP transport protocol for MSRP over WebSockets. As all MSRP over WebSocket messages MUST be routed via an MSRP WebSocket Server, it is acceptable for an MSRP WebSocket Client to specify the "TCP/MSRP" or "TCP/TLS/MSRP" protocols in the SDP m-line - that being the protocol used by non-WebSocket clients and between MSRP relays ([RFC4975] section 8.1).
The "ws" transport parameter will appear in the endpoint URI in the SDP "path" attribute ([RFC4975] Section 8.2). MSRP was designed with the possibility of new transport bindings in mind ([RFC4975] Section 6) so MSRP implementations SHOULD already allow unrecognised transports, provided that they do not have to establish a direct connection to the resource described by the URI.
The MSRP relay specification [RFC4976] states that AUTH requests MUST be authenticated. This document modifies this requirement to state that all connections between MSRP clients and relays MUST be authenticated. In the case of the MSRP WebSocket Clients there are two possible authentication mechanisms:
The AUTH request is required event when authentication occurs at the WebSocket connection level as the 200 OK response to the AUTH provides the Use-Path: header required to create the SDP offer.
It is RECOMMENDED that MSRP WebSocket Clients and Servers keep their WebSocket connections open by sending periodic WebSocket "Ping" frames as described in [RFC6455] section 5.5.2.
A future WebSocket protocol extension providing a similar keep alive mechanism could also be used.
When MSRP WebSocket Clients or Servers cannot use WebSocket "Ping" frames to keep connections open an MSRP implementation MAY use bodiless SEND requests as described in [RFC4975] section 7.1. MSRP WebSocket Clients or Servers MUST be prepared to receive bodiless SEND requests.
Prior to sending MSRP requests, an MSRP WebSocket Client connects to an MSRP WebSocket Server and performs the connection handshake. As described in Section 3 the handshake procedure involves a HTTP GET method request from the Client and a response from the Server including an HTTP 101 status code.
In order to authorize the WebSocket connection, the MSRP WebSocket Server MAY inspect any HTTP headers present (for example, Cookie [RFC6265], Host [RFC2616], or Origin [RFC6454]) in the HTTP GET request. For many web applications the value of such a Cookie is provided by the web server once the user has authenticated themselves to the web server, which could be done by many existing mechanisms. As an alternative method, the MSRP WebSocket Server could request HTTP authentication by replying to the Client's GET method request with a HTTP 401 status code. The WebSocket protocol [RFC6455] covers this usage in section 4.1:
If the HTTP GET request contains an Origin header the MSRP WebSocket Server SHOULD indicate Cross-Origin Resource Sharing [CORS] by adding an Access-Control-Allow-Origin header to the 101 response.
Regardless of whether the MSRP WebSocket Server requires authentication during the WebSocket handshake, authentication MAY be requested at the MSRP protocol level by an MSRP Server challenging AUTH requests using a 401 response. Therefore, an MSRP WebSocket Client SHOULD support HTTP Digest [RFC2617] authentication as stated in [RFC4976].
Alice (MSRP WSS) a.example.com | | |HTTP GET (WS handshake) F1 | |---------------------------->| |101 Switching Protocols F2 | |<----------------------------| | | |AUTH F3 | |---------------------------->| |200 OK F4 | |<----------------------------| | |
Alice loads a web page using her web browser and retrieves JavaScript code implementing the WebSocket MSRP sub-protocol defined in this document. The JavaScript code (an MSRP WebSocket Client) establishes a secure WebSocket connection with an MSRP relay (an MSRP WebSocket Server) at a.example.com. Upon WebSocket connection, Alice constructs and sends an MSRP AUTH request. Since the JavaScript stack in a browser has no way to determine the local address from which the WebSocket connection was made, this implementation uses a random ".invalid" domain name for the hostpart of the From-Path URI (see Appendix A.1).
In this example, it is assumed that authentication is performed at the WebSocket layer (not shown), so no challenge is issued for the MSRP AUTH message:
F1 HTTP GET (WS handshake) Alice -> a.example.com (TLS) GET / HTTP/1.1 Host: a.example.com Upgrade: websocket Connection: Upgrade Sec-WebSocket-Key: dGhlIHNhbXBsZSBub25jZQ== Origin: https://www.example.com Sec-WebSocket-Protocol: msrp Sec-WebSocket-Version: 13 F2 101 Switching Protocols a.example.com -> Alice (TLS) HTTP/1.1 101 Switching Protocols Upgrade: websocket Connection: Upgrade Sec-WebSocket-Accept: s3pPLMBiTxaQ9kYGzzhZRbK+xOo= Sec-WebSocket-Protocol: msrp F3 AUTH Alice -> a.example.com (transport WSS) MSRP 49fi AUTH To-Path: msrps://alice@a.example.com:443;ws From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws -------49fi$ F4 200 OK a.example.com -> Alice (transport WSS) MSRP 49fi 200 OK To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://alice@a.example.com:443;ws Use-Path: msrps://a.example.com:2855/jui787s2f;tcp Expires: 900 -------49fi$
Alice (MSRP WSS) a.example.com | | |HTTP GET (WS handshake) F1 | |---------------------------->| |101 Switching Protocols F2 | |<----------------------------| | | |AUTH F3 | |---------------------------->| |401 Unauthorized F4 | |<----------------------------| |AUTH F5 | |---------------------------->| |200 OK F6 | |<----------------------------| | |
This example uses the same scenario as Section 8.1.1, but with authentication performed at the MSRP layer.
Note that MSRP does not permit line folding. A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual MSRP message.
F1 HTTP GET (WS handshake) Alice -> a.example.com (TLS) GET / HTTP/1.1 Host: a.example.com Upgrade: websocket Connection: Upgrade Sec-WebSocket-Key: dGhlIHNhbXBsZSBub25jZQ== Origin: https://www.example.com Sec-WebSocket-Protocol: msrp Sec-WebSocket-Version: 13 F2 101 Switching Protocols a.example.com -> Alice (TLS) HTTP/1.1 101 Switching Protocols Upgrade: websocket Connection: Upgrade Sec-WebSocket-Accept: s3pPLMBiTxaQ9kYGzzhZRbK+xOo= Sec-WebSocket-Protocol: msrp F3 AUTH Alice -> a.example.com (transport WSS) MSRP 4rsxt9nz AUTH To-Path: msrps://alice@a.example.com:443;ws From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws -------4rsxt9nz$ F4 401 Unauthorized a.example.com -> Alice (transport WSS) MSRP 4rsxt9nz 401 Unauthorized To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://alice@a.example.com:443;ws WWW-Authenticate: Digest realm="example.com", \ nonce="UvtfpVL7XnnJ63EE244fXDthfLihlMHOY4+dd4A=", qop="auth" -------4rsxt9nz$ F5 AUTH Alice -> a.example.com (transport WSS) MSRP qy1hsow5 AUTH To-Path: msrps://alice@a.example.com:443;ws From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws Authorization: Digest username="alice", realm="example.com", \ nonce="UvtfpVL7XnnJ63EE244fXDthfLihlMHOY4+dd4A=", \ uri="msrps://alice@a.example.com:443;ws", \ response="5011d0d58fe975e0d0cdc007ae26f4b7", \ qop=auth, cnonce="zic5ml401prb", nc=00000001 -------qy1hsow5$ F6 200 OK a.example.com -> Alice (transport WSS) MSRP qy1hsow5 200 OK To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://alice@a.example.com:443;ws Use-Path: msrps://a.example.com:2855/jui787s2f;tcp Expires: 900 -------qy1hsow5$
The following sub-sections show various message exchanges occuring during the course of an MSRP session between a WebSocket client and a non-WebSocket client.
The following example shows SDP that could be included in a SIP message to set up an MSRP session between Alice and Bob where Alice uses a WebSocket MSRP relay, and Bob uses a traditional MSRP client without a relay.
Note that SDP does not permit line folding. A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual SDP.
Alice makes an offer with a path including the relay (having already successfully authenticated with the relay):
c=IN IP4 a.example.com
m=message 1234 TCP/TLS/MSRP *
a=accept-types:message/cpim text/plain text/html
a=path:msrps://a.example.com:2855/jui787s2f;tcp \
msrps://df7jal23ls0d.invalid:2855/98cjs;ws
In this offer, Alice wishes to receive MSRP messages via the relay at a.example.com. She wants to use TLS as the transport for the MSRP session (beyond the relay). She can accept message/cpim, text/plain, and text/html message bodies in SEND requests.
Bob's answer to this offer could look like:
c=IN IP4 bob.example.com m=message 1234 TCP/TLS/MSRP * a=accept-types:message/cpim text/plain a=path:msrps://bob.example.com:8145/foo;tcp
Here Bob wishes to receive the MSRP messages at bob.example.com. He can accept only message/cpim and text/plain message bodies in SEND requests and has rejected the text/html content offered by Alice. He does not need a relay to set up the MSRP session.
Alice (MSRP WSS) a.example.com (MSRP TLS) Bob | | | |SEND F1 | | |---------------------------->| | |200 OK F2 | | |<----------------------------| | | |SEND F3 | | |---------------------------->| | |200 OK F4 | | |<----------------------------|
Later in the session, Alice sends an instant message to Bob. The MSRP WebSocket Server at a.example.com acts as an MSRP relay, routing the message to Bob over TLS.
Message details (note that MSRP does not permit line folding. A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual request or response):
F1 SEND Alice -> a.example.com (transport WSS)
MSRP 6aef SEND
To-Path: msrps://a.example.com:2855/jui787s2f;tcp \
msrps://bob.example.com:8145/foo;tcp
From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws
Success-Report: no
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain
Hi Bob, I'm about to send you file.mpeg
-------6aef$
F2 200 OK a.example.com -> Alice (transport WSS)
MSRP 6aef 200 OK
To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws
From-Path: msrps://a.example.com:2855/jui787s2f;tcp
-------6aef$
F3 SEND a.example.com -> Bob (transport TLS)
MSRP juh76 SEND
To-Path: msrps://bob.example.com:8145/foo;tcp
From-Path: msrps://a.example.com:2855/jui787s2f;tcp \
msrps://df7jal23ls0d.invalid:2855/98cjs;ws
Success-Report: no
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain
Hi Bob, I'm about to send you file.mpeg
-------juh76$
F4 200 OK Bob -> a.example.com (transport TLS)
MSRP juh76 200 OK
To-Path: msrps://a.example.com:2855/jui787s2f;tcp
From-Path: msrps://bob.example.com:8145/foo;tcp
-------juh76$
Bob (MSRP TLS) a.example.com (MSRP WSS) Alice | | | |SEND F1 | | |---------------------------->| | |200 OK F2 | | |<----------------------------| | | |SEND F3 | | |---------------------------->| | |200 OK F4 | | |<----------------------------|
Later in the session, Bob sends an instant message to Alice. The MSRP WebSocket Server at a.example.com acts as an MSRP relay, routing the message to Alice over secure WebSocket.
Message details (note that MSRP does not permit line folding. A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual request or response):
F1 SEND Bob -> a.example.com (transport TLS)
MSRP xght6 SEND
To-Path: msrps://a.example.com:2855/jui787s2f;tcp \
msrps://df7jal23ls0d.invalid:2855/98cjs;ws
From-Path: msrps://bob.example.com:8145/foo;tcp
Success-Report: no
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain
Thanks for the file.
-------xght6$
F2 200 OK a.example.com -> Bob (transport TLS)
MSRP xght6 200 OK
To-Path: msrps://bob.example.com:8145/foo;tcp
From-Path: msrps://a.example.com:2855/jui787s2f;tcp
-------xght6$
F3 SEND a.example.com -> Alice (transport WSS)
MSRP yh67 SEND
To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws
From-Path: msrps://a.example.com:2855/jui787s2f;tcp \
msrps://bob.example.com:8145/foo;tcp
Success-Report: no
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain
Thanks for the file.
-------yh67$
F4 200 OK Bob -> a.example.com (transport TLS)
MSRP yh67 200 OK
To-Path: msrps://a.example.com:2855/jui787s2f;tcp
From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws
-------yh67$
The following sub-sections show various message exchanges occuring during the course of an MSRP session between two WebSocket clients.
The following example shows SDP that could be included in a SIP message to set up an MSRP session between Alice and Carol where both of them are using the same WebSocket MSRP relay.
Alice makes an offer with a path including the relay (having already successfully authenticated with the relay):
c=IN IP4 a.example.com
m=message 1234 TCP/TLS/MSRP *
a=accept-types:message/cpim text/plain text/html
a=path:msrps://a.example.com:2855/jui787s2f;tcp \
msrps://df7jal23ls0d.invalid:2855/98cjs;ws
In this offer, Alice wishes to receive MSRP messages via the relay at a.example.com. She wants to use TLS as the transport for the MSRP session (beyond the relay). She can accept message/cpim, text/plain, and text/html message bodies in SEND requests.
Carol's answer to this offer could look like:
c=IN IP4 a.example.com
m=message 1234 TCP/TLS/MSRP *
a=accept-types:message/cpim text/plain
a=path:msrps://a.example.com:2855/iwnslt;tcp \
msrps://jk9awp14vj8x.invalid:2855/76qwe;ws
Here Carol also wishes to receive the MSRP messages via a.example.com. She can accept only message/cpim and text/plain message bodies in SEND requests and has rejected the text/html content offered by Alice.
Alice (MSRP WSS) a.example.com (MSRP WSS) Carol | | | |SEND F1 | | |---------------------------->| | |200 OK F2 | | |<----------------------------| | | |SEND F3 | | |---------------------------->| | |200 OK F4 | | |<----------------------------|
Later in the session Alice sends an instant message to Carol. The MSRP WebSocket Server at a.example.com acts as an MSRP relay, routing the message to Carol over secure WebSocket.
In this example both Alice and Carol are using MSRP WebSocket Clients, and the same MSRP WebSocket Server. This means that a.example.com will appear twice in the To-Path in F1. a.example.com can either handle this internally or loop the MSRP SEND request back to itself as if it were two, separate, MSRP relays.
Message details (note that MSRP does not permit line folding. A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual request or response):
F1 SEND Alice -> a.example.com (transport WSS)
MSRP kjh6 SEND
To-Path: msrps://a.example.com:2855/jui787s2f;tcp \
msrps://a.example.com:2855/iwnslt;tcp \
msrps://jk9awp14vj8x.invalid:2855/76qwe;ws
From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws
Success-Report: no
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain
Carol, I sent that file to Bob.
-------kjh6$
F2 200 OK a.example.com -> Alice (transport WSS)
MSRP kjh6 200 OK
To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws
From-Path: msrps://a.example.com:2855/jui787s2f;tcp
-------kjh6$
F3 SEND a.example.com -> Carol (transport WSS)
MSRP re58 SEND
To-Path: msrps://jk9awp14vj8x.invalid:2855/76qwe;ws
From-Path: msrps://a.example.com:2855/iwnslt;tcp \
msrps://a.example.com:2855/jui787s2f;tcp \
msrps://df7jal23ls0d.invalid/98cjs;ws
Success-Report: no
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain
Carol, I sent that file to Bob.
-------re58$
F4 200 OK Carol -> a.example.com (transport WSS)
MSRP re58 200 OK
To-Path: msrps://a.example.com:2855/iwnslt;tcp
From-Path: msrps://jk9awp14vj8x.invalid:2855/76qwe;ws
-------re58$
The following sub-sections show various message exchanges occuring during the course of an MSRP session between a WebSocket client and a non-WebSocket client, where the latter is also using an MSRP relay.
The following example shows SDP that could be included in a SIP message to set up an MSRP session between Alice and Bob where Alice uses a WebSocket MSRP relay, and Bob uses a traditional MSRP client with a separate relay.
Alice makes an offer with a path including the relay (having already successfully authenticated with the relay):
c=IN IP4 a.example.com
m=message 1234 TCP/TLS/MSRP *
a=accept-types:message/cpim text/plain text/html
a=path:msrps://a.example.com:2855/jui787s2f;tcp \
msrps://df7jal23ls0d.invalid:2855/98cjs;ws
In this offer, Alice wishes to receive MSRP messages via the relay at a.example.com. She wants to use TLS as the transport for the MSRP session (beyond the relay). She can accept message/cpim, text/plain, and text/html message bodies in SEND requests.
Bob's answer to this offer could look like:
c=IN IP4 bob.example.com
m=message 1234 TCP/TLS/MSRP *
a=accept-types:message/cpim text/plain
a=path:msrps://relay.example.net:2855/kwvin5f;tcp \
msrps://bob.example.com:8145/foo;tcp
Here Bob wishes to receive the MSRP messages via the relay at relay.example.net. He can accept only message/cpim and text/plain message bodies in SEND requests and has rejected the text/html content offered by Alice.
Alice (MSRP WSS) a.example.com (MSRP) relay.example.net (MSRP) Bob | | | | |SEND F1 | | | |--------------------->| | | |200 OK F2 | | | |<---------------------| | | | |SEND F3 | | | |---------------------->| | | |200 OK F4 | | | |<----------------------| | | | |SEND F5 | | | |------------------->| | | |200 OK F6 | | | |<-------------------|
Later in the session Alice sends an instant message to Bob. The MSRP WebSocket Server at a.example.com acts as an MSRP relay, routing the message to Bob via his relay, relay.example.net.
Message details (note that MSRP does not permit line folding. A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual request or response):
F1 SEND Alice -> a.example.com (transport WSS)
MSRP Ycwt SEND
To-Path: msrps://a.example.com:2855/jui787s2f;tcp \
msrps://relay.example.net:2855/kwvin5f;tcp \
msrps://bob.example.com:8145/foo;tcp
From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws
Success-Report: no
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain
Bob, that was the wrong file - don't watch it!
-------Ycwt$
F2 200 OK a.example.com -> Alice (transport WSS)
MSRP Ycwt 200 OK
To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws
From-Path: msrps://a.example.com:2855/jui787s2f;tcp
-------Ycwt$
F3 SEND a.example.com -> relay.example.net (transport TLS)
MSRP 13GA SEND
To-Path: msrps://relay.example.net:2855/kwvin5f;tcp \
msrps://bob.example.com:8145/foo;tcp
From-Path: msrps://a.example.com:2855/jui787s2f;tcp \
msrps://df7jal23ls0d.invalid/98cjs;ws
Success-Report: no
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain
Bob, that was the wrong file - don't watch it!
-------13GA$
F4 200 OK relay.example.net -> a.example.com (transport TLS)
MSRP 13GA 200 OK
To-Path: msrps://a.example.com:2855/iwnslt;tcp
From-Path: msrps://relay.example.net:2855/kwvin5f;tcp
-------13GA$
F5 SEND relay.example.net -> bob.example.com (transport TLS)
MSRP kXeg SEND
To-Path: msrps://bob.example.com:8145/foo;tcp
From-Path: msrps://relay.example.net:2855/kwvin5f;tcp \
msrps://a.example.com:2855/jui787s2f;tcp \
msrps://df7jal23ls0d.invalid/98cjs;ws
Success-Report: no
Byte-Range: 1-*/*
Message-ID: 87652
Content-Type: text/plain
Bob, that was the wrong file - don't watch it!
-------kXeg$
F6 200 OK bob.example.com -> relay.example.net (transport TLS)
MSRP kXeg 200 OK
To-Path: msrps://relay.example.net:2855/kwvin5f;tcp
From-Path: msrps://bob.example.com:8145/foo;tcp
-------kXeg$
Note to RFC Editor: Please remove this section and the reference to [RFC6982] before publication.
This section records the status of known implementations of the protocol defined by this specification at the time of posting of this Internet-Draft, and is based on a proposal described in [RFC6982]. The description of implementations in this section is intended to assist the IETF in its decision processes in progressing drafts to RFCs. Please note that the listing of any individual implementation here does not imply endorsement by the IETF. Furthermore, no effort has been spent to verify the information presented here that was supplied by IETF contributors. This is not intended as, and must not be construed to be, a catalog of available implementations or their features. Readers are advised to note that other implementations may exist.
According to [RFC6982], "this will allow reviewers and working groups to assign due consideration to documents that have the benefit of running code, which may serve as evidence of valuable experimentation and feedback that have made the implemented protocols more mature. It is up to the individual working groups to use this information as they see fit".
MSRP traffic transported over WebSockets MUST be protected by using a secure WebSocket connection (using TLS [RFC5246] over TCP).
When establishing a connection using MSRP over secure WebSockets, the client MUST authenticate the server using the server's certificate according to the WebSocket validation procedure in [RFC6455].
Any security considerations specific to the WebSocket protocol are detailed in the relevant specifications ([RFC6455] and [RFC4975]) and are considered outside the scope of this document.
This specification requests IANA to register the WebSocket MSRP sub-protocol in the "WebSocket Subprotocol Name Registry" with the following data:
Special thanks to Inaki Baz Castillo, Jose Luis Millan Villegas, and Victor Pascual, the authors of [RFC7118] which has inspired this draft.
Additional thanks to Inaki Baz Castillo who pointed out that "web-browser" shouldn't be used all the time as this specification should be valid for smartphones and apps other than browsers and suggested clarifications to the SDP handling for MSRP over WebSocket.
Special thanks to James Wyatt from Crocodile RCS Ltd for helping with the JavaScript MSRP over WebSockets prototyping.
Thanks to Saul Ibarra Corretge for suggesting that the existing MSRP keep alive mechanism may be used when WebSocket pings are not available.
| [RFC2119] | Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. |
| [RFC4975] | Campbell, B., Mahy, R. and C. Jennings, "The Message Session Relay Protocol (MSRP)", RFC 4975, September 2007. |
| [RFC4976] | Jennings, C., Mahy, R. and A. Roach, "Relay Extensions for the Message Sessions Relay Protocol (MSRP)", RFC 4976, September 2007. |
| [RFC5234] | Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008. |
| [RFC6455] | Fette, I. and A. Melnikov, "The WebSocket Protocol", RFC 6455, December 2011. |
The JavaScript stack in web browsers does not have the ability to discover the local transport address used for originating WebSocket connections. Therefore the MSRP WebSocket Client constructs a domain name consisting of a random token followed by the ".invalid" top-level domain name, as stated in [RFC2606], and uses it within its From-Path headers.