BEHAVE | M. Petit-Huguenin |
Internet-Draft | Impedance Mismatch |
Intended status: Standards Track | S. Nandakumar |
Expires: November 07, 2013 | G. Salgueiro |
P. Jones | |
Cisco Systems | |
May 06, 2013 |
Traversal Using Relays around NAT (TURN) Uniform Resource Identifiers
draft-petithuguenin-behave-turn-uris-04
This document specifies the syntax of Uniform Resource Identifier (URI) schemes for the Traversal Using Relays around NAT (TURN) protocol. It defines two URI schemes that can be used to provision the configuration values needed by the resolution mechanism defined in [RFC5928].
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on November 07, 2013.
Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
This document may not be modified, and derivative works of it may not be created, except to format it for publication as an RFC or to translate it into languages other than English.
This document specifies the syntax and semantics of the Uniform Resource Identifier (URI) scheme for the Traversal Using Relays around NAT (TURN) protocol.
The TURN protocol is a specification allowing hosts behind NAT to control the operation of a relay server. The relay server allows hosts to exchange packets with its peers. The peers themselves may also be behind NATs. RFC 5766 [RFC5766] defines the specifics of the TURN protocol.
The "turn" and "turns" URI schemes are used to designate a TURN server (also known as a relay) on Internet hosts accessible using the TURN protocol. With the advent of standards such as [WEBRTC], we anticipate a plethora of endpoints and web applications to be able to identify and communicate with such a TURN server to carry out the TURN protocol. This also implies those endpoints and/or applications to be provisioned with appropriate configuration required to identify the TURN server. Having an inconsistent syntax has its drawbacks and can result in non-interoperable solutions. It can result in solutions that are ambiguous and have implementation limitations on the different aspects of the syntax and alike. The "turn/turns" URI scheme helps alleviate most of these issues by providing a consistent way to describe, configure and exchange the information identifying a TURN server. This would also prevent the shortcomings inherent with encoding similar information in non-uniform syntaxes such as the ones proposed in [WEBRTC], for example.
[RFC5928] defines a resolution mechanism to convert a secure flag, a host name or IP address, an eventually empty port, and an eventually empty transport to a list of IP address, port, and TURN transport tuples.
To simplify the provisioning of TURN clients, this document defines a TURN and a TURNS URI scheme that can carry the four components needed for the resolution mechanism.
The key words "MUST", "MUST NOT", "REQUIRED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
The "turn" URI takes the following form (the syntax below is non-normative):
Note that the <port> part and the preceding ":" (colon) character, is OPTIONAL.
A TURN/TURNS URI has the following formal ABNF syntax [RFC5234]:
turnURI = scheme ":" turn-host [ ":" turn-port ] [ "?transport=" transport ] scheme = "turn" / "turns" transport = "udp" / "tcp" / transport-ext transport-ext = 1*unreserved turn-host = IP-literal / IPv4address / reg-name turn-port = *DIGIT IP-literal = "[" ( IPv6address / IPvFuture ) "]" IPvFuture = "v" 1*HEXDIG "." 1*( unreserved / sub-delims / ":" ) IPv6address = 6( h16 ":" ) ls32 / "::" 5( h16 ":" ) ls32 / [ h16 ] "::" 4( h16 ":" ) ls32 / [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32 / [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32 / [ *3( h16 ":" ) h16 ] "::" h16 ":" ls32 / [ *4( h16 ":" ) h16 ] "::" ls32 / [ *5( h16 ":" ) h16 ] "::" h16 / [ *6( h16 ":" ) h16 ] "::" h16 = 1*4HEXDIG ls32 = ( h16 ":" h16 ) / IPv4address IPv4address = dec-octet "." dec-octet "." dec-octet "." dec-octet dec-octet = DIGIT ; 0-9 / %x31-39 DIGIT ; 10-99 / "1" 2DIGIT ; 100-199 / "2" %x30-34 DIGIT ; 200-249 / "25" %x30-35 ; 250-255 reg-name = *( unreserved / pct-encoded / sub-delims )
<unreserved>, <sub-delims>, and <pct-encoded> are specified in [RFC3986]. The core rules <DIGIT> and <HEXDIGIT> are used as described in Appendix B of RFC 5234 [RFC5234].
The <host>, <port> and <transport> components are passed without modification to the [RFC5928] algorithm. <secure> is set to false if <scheme> is equal to "turn" and set to true if <scheme> is equal to "turns" and passed to the [RFC5928] algorithm with the other components.
The TURN protocol supports sending messages over UDP, TCP or TLS-over-TCP. The "turns" URI scheme MUST be used when TURN is run over TLS-over-TCP (or in the future DTLS-over-UDP) and the "turn" scheme MUST be used otherwise.
The required <host> part of the "turn" URI denotes the TURN server host.
The <port> part, if present, denotes the port on which the TURN server is awaiting connection requests. If it is absent, the default port is 3478 for both UDP and TCP. The default port for TURN over TLS is 5349.
Note to RFC Editor: Please remove this section before publication.
This section records the status of known implementations of the protocol defined by this specification at the time of posting of this Internet-Draft, and is based on a proposal described in [RUNNING-CODE]. According to [RUNNING-CODE], "this will allow reviewers and working groups to assign due consideration to documents that have the benefit of running code, by considering the running code as evidence of valuable experimentation and feedback that has made the implemented protocols more mature. It is up to the individual working groups to use this information as they see fit".
Security considerations for the resolution mechanism are discussed in [RFC5928].
The "turn" and "turns" URI schemes do not introduce any specific security issues beyond the security considerations discussed in [RFC3986].
This section contains the registration information for the "turn" and "turns" URI Schemes (in accordance with [RFC4395]).
URI scheme name: turn
Status: permanent
URI scheme syntax: See Section 3.1.
URI scheme semantics: See Section 3.2.
Encoding considerations: There are no encoding considerations beyond those in [RFC3986].
Applications/protocols that use this URI scheme name:
Interoperability considerations: N/A
Security considerations: See Section 5.
Contact: Marc Petit-Huguenin <petithug@acm.org>
Author/Change controller: The IESG
References: RFCXXXX
[[NOTE TO RFC EDITOR: Please change XXXX to the number assigned to this specification, and remove this paragraph on publication.]]
URI scheme name: turns
Status: permanent
URI scheme syntax: See Section 3.1.
URI scheme semantics: See Section 3.2.
Encoding considerations: There are no encoding considerations beyond those in [RFC3986].
Applications/protocols that use this URI scheme name:
Interoperability considerations: N/A
Security considerations: See Section 5.
Contact: Marc Petit-Huguenin <petithug@acm.org>
Author/Change controller: The IESG
References: RFCXXXX
[[NOTE TO RFC EDITOR: Please change XXXX to the number assigned to this specification, and remove this paragraph on publication.]]
Thanks to Margaret Wasserman, Magnus Westerlund, Juergen Schoenwaelder, Sean Turner, Ted Hardie, Dave Thaler, Alfred E. Heggestad, Eilon Yardeni, Dan Wing, Alfred Hoenes, and Jim Kleck for their comments, suggestions and questions that helped to improve the draft-petithuguenin-behave-turn-uri-bis document.
Many thanks to Cullen Jennings for his detailed review and thoughtful comments on the draft-nandakumar-rtcweb-turn-uri document.
Thanks to Bjoern Hoehrmann for his comments, suggestions and questions that helped to improve the this document.
The <turn-port> and <turn-host> ABNF productions have been copied from the <port> and <host> ABNF productions from [RFC3986].
[RFC2119] | Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. |
[RFC3986] | Berners-Lee, T., Fielding, R. and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, January 2005. |
[RFC5234] | Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008. |
[RFC5766] | Mahy, R., Matthews, P. and J. Rosenberg, "Traversal Using Relays around NAT (TURN): Relay Extensions to Session Traversal Utilities for NAT (STUN)", RFC 5766, April 2010. |
[RFC5928] | Petit-Huguenin, M., "Traversal Using Relays around NAT (TURN) Resolution Mechanism", RFC 5928, August 2010. |
[RFC4395] | Hansen, T., Hardie, T. and L. Masinter, "Guidelines and Registration Procedures for New URI Schemes", BCP 35, RFC 4395, February 2006. |
[WEBRTC] | Bergkvist, A., Burnett, D., Jennings, C. and A. Narayanan, "WebRTC 1.0: Real-time Communication Between Browsers", World Wide Web Consortium WD WD-webrtc-20120821, August 2012. |
[RUNNING-CODE] | Sheffer, Y. and A. Farrel, "Improving Awareness of Running Code: the Implementation Status Section", Internet-Draft draft-sheffer-running-code-04, April 2013. |
Table 1 shows how the <secure>, <port> and <transport> components are populated from various URIs. For all these examples, the <host> component is populated with "example.org".
URI | <secure> | <port> | <transport> |
---|---|---|---|
turn:example.org | false | ||
turns:example.org | true | ||
turn:example.org:8000 | false | 8000 | |
turn:example.org?transport=udp | false | UDP | |
turn:example.org?transport=tcp | false | TCP | |
turns:example.org?transport=tcp | true | TLS |
This section must be removed before publication as an RFC.