| Internet Engineering Task Force | A. Malhotra |
| Internet-Draft | Boston University |
| Intended status: Informational | A. Langly |
| Expires: August 12, 2019 | |
| W. Ladd | |
| Cloudflare | |
| February 8, 2019 |
Roughtime
draft-roughtime-aanchal-00
This document specifies Roughtime - a protocol that aims to achieve rough time synchronization while detecting servers that provide inaccurate time and providing cryptographic proof of their malfeasance.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on August 12, 2019.
Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Time synchronization is essential to Internet security as many security protocols and other applications require synchronization [RFC7384][MCBG]. Unfortunately widely deployed protocols such as the Network Time Protocol (NTP) [RFC5905] lack essential security features, and even newer protocols like Network Time Security (NTS) [I-D.ietf-ntp-using-nts-for-ntp] fail to ensure that the servers behave correctly. Authenticating time servers prevents network adversaries from modifying time packets. An authenticated time server still has full control over the contents of time packet and may go rogue. Roughtime protocol provides cryptographic proof of malfeasance, enabling clients to detect and prove to a third party server's attempts to influence the time a client computes.
| Protocol | Authenticated Server | Server Malfeasance Evidence |
|---|---|---|
| NTP, Chronos | N | N |
| NTP-MD5 | Y* | N |
| NTP-Autokey | Y** | N |
| NTS | Y | N |
| Roughtime | Y | Y |
Security Properties of current protocols
Y* For security issues with symmetric-key based NTP-MD5 authentication, please refer to Message Authentication Code for the Network Time Protocol draft
Y** For security issues with Autokey Public Key Authentication, refer to [Autokey]
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
Roughtime is a protocol for rough time synchronization that enables clients to provide cryptographic proof of server malfeasance. It does so by having responses from servers include a signature with a certificate rooted in long term public/private key pair over a portion of the initial request, thus providing cryptographic proof that the timestamp was issued after previous responses and before future ones.
Single server mode: At its most basic level, Roughtime is a one round protocol in which a completely fresh client requests the current time and the server sends a signed response. The response inculdes a timestamp (the number of microseconds since the Unix epoch) and a radius (in microseconds) used to indicate the servers certainty about the reported time. For example, a radius of 1,000,000 microseconds means the server is absolutely confident that the true time is within one second of the reported time.
The server proves freshness of its response as follows: The request contains a random challenge. The server incorporates the challenge into its signed response so that its needed to verify the signature. This proves that the signed response could only have been generated after the challenge was issued if the challenge has sufficient entropy.
Chaining multiple servers: For subsequent requests, the client generates its nonce by hashing the reply from the first server with a random value. This proves that the nonce was created after the reply from the first server. It sends that to the second server and receives a signature from it covering that nonce and the time from the second server.
Cryptographic proof of misbehavior: If the time from the second server is before the first, then the client has proof of misbehavior; the reply from the second server implicitly shows that it was created later because of the way that the client constructed the nonce. If the time from the second server is after, then the client can contact the first server again and get a signature that was provably created afterwards, but with an earlier timestamp.
With only two servers, the client can end up with proof that something is wrong, but no idea what the correct time is. But with half a dozen or more independent servers, the client will end up with chain of proof of any servers misbehavior, signed by several others, and (presumably) enough accurate replies to establish what the correct time is. Furthermore this proof may be validated by third parties ultimately leading to a revocation of trust in the misbehaving server.
A Roughtime packet is a UDP packet whose contents are interpreted as a map from uint32s to strings of bytes. The byte strings must all have lengths a multiple of four. All uint32 are encoded with the least significant byte first. The keys of this map are called tags, and we speak of the value of a tag as the string of bytes it is mapped to.
A Roughtime packet is serialized as follows: First there is a header, The first four bytes in the header are the uint32 number of tags N, and hence of (tag, value) pairs. 4*(N-1) bytes are offsets, each offset a uint32. The last 4*N bytes are the tags.
Tags are in ascending order, and no tag can be repeated. Offsets are all a multiple of four and MUST be strictly increasing. The offset array is considered to have a not explicitly encoded value of 0 as its zeroeth entry.
Immediately following the header is a concatenation of all the strings. The first post-header byte is at offset 0, and the end of the final byte string is indicated by the end of the packet. The ith byte string ends at offset[i+1]-1, counting of course from 0, and begins at offset[i]. It is the value associated to the ith tag.
This encoding may be recursive: a value may be said to be in Roughtime format and thus have a header, etc. Tags may be listed as four ASCII characters [RFC0020]. In this case the tag when serialized will be those four ASCII characters. Exempli gratia NONC would be the numeric value 0x434e4f4e. They may also be listed as fewer then four ASCII characters with hex escape codes at the end.
A query is a Roughtime packet with the tag NONC. The contents of NONC are 64 bytes. The request packet MUST be a minimum of 1024 bytes. To attain this size the tag PAD\xff MAY be added at the end of the packet with a conent of all zeros. Other tags MUST be ignored by the server. Future versions may specify additional tags and their semantics, so clients MUST NOT add other tags.
A response contains the following tags: SREP, SIG\x00, CERT, INDX, PATH, SREP value is itself in Roughtime format that contains the folowing tags: ROOT, MIDP, RADI. SIG\x00 is an Ed25519 signature [RFC8032] over the SREP value using the public key contained in CERT as explained later.
CERT in Roughtime format and contains the following tags: DELE, SIG\x00. This SIG\x00 is an Ed25519 signature over DELE using the long term public key of the server. DELE is itself in Roughtime format containing tags MINT, MAXT, PUBK.
ROOT contains the root hash value of a Merkle tree using SHA512 as described when we reach the PATH and INDX blocks MIDP contains an uint64 value consisting of the number of microseconds since the Unix epoch in the smeared scale. RADI contains the server's estimate of the accuracy of MIDP. Servers MUST ensure the true time is within (MIDP-RADI, MIDP+RADI) at the time they compose the response packet.
MINT is the minimum uint64 timestamp at which the key in PUBK is trusted to begin signing time. MIDP > MINT for validity. MAXT is the maximum uint64 timestamp at which PUBK may sign. MIDP < MAXT for validity. PUBK is a temporary Ed25519 public key. The use of this field is to enable seperation of a root public key from keys on devices exposed to the public Internet.
INDX is a uint32 determining the position of NONC in a Merkle tree. PATH determines the values to be hashed with the running hash as one ascends the tree. The final value MUST be equal to ROOT. PATH is a multiple of 64 bytes long. One starts by computing the hash of the NONC value from the request, with \x00 preappended. Then one walks from the least significant bit of INDX to the most significant bit, and also walks towards the end of PATH. If PATH ends then the remaining bits of the INDX MUST be all zero. This indicates the termination of the walk. If the current bit is 0, one hashes \x01, the current hash, and the value from PATH. If the current bit is 1 one hashes \x01, the value from PATH, and the current HASH. This enables servers to batch signing when busy.
A client MUST check the following properties when it receives a response. We assume the long term server public key is known to the client through other means.
A response that passes these checks is said to be valid. Validity of a response does not prove the time is correct, but merely that the server signed it, and more specifically began to compute the signature at a time in between (MIDP-RADI, MIDP+RADI).
Every day in Roughtime has 86400 seconds. A day without a leap second is a day where all seconds are SI seconds. A day with a positive leap second is one where every second is 86401/86400 SI seconds long. A day with a negative leap second is a day where every second is 86399/86400 SI seconds long. Days begin and end at noon, and when a leap-second is added or removed from UTC it is smeared out over the course of a day.
Arithemtic on the smeared scale requires knowing when the seconds changed length and thus requires a leap second table.
A chain of responses is a series of responses where the SHA-512 hash of the preceding response H, is concatenated with a 64 bit blind X, and then SHA-512(H, X) is the NONC used in the subsequent response. These may be represented in JSON as TBD
A pair of responses (r_1, r_2) is invalid if MIDP_1-RADI_1 > MIDP_2+RADI_2. A chain of longer length is invalid if for any i, j such that i < j, (r_i, r_j) is an invalid pair.
Invalidity of a chain is proof that causality has been violated if all servers were reporting correct time. An invalid chain where all individual responses are valid is cryptographic proof of malfeasance of at least one server: if all servers had the correct time in the chain, causality would imply that MIDP_1-RADI_1 < MIDP_2+RADI_2.
Servers MAY send back a fraction of responses that are syntactically invalid or contain invalid signatures as well as incorrect times. Clients MUST properly reject such responses.
The below list contains a list of servers with their public keys in either Base64 or hexidecimal format.
TBD
This memo includes no request to IANA.
This protocol will not survive the advent of quantum computers. Currently only one signature scheme is supported. Maintaining a list of trusted servers and adjudicating violations of the rules by servers are not discussed in this document and are essential for security. Arithmetic on the adjusted timescale is interesting with intervals, and this may impact the interpretation of the MAXT and MINT fields. Servers carry out a significant amount of computation in response to clients, and thus may experience vulnerability to denial of service attacks.
This protocol does not provide any confidentiality, and given the nature of timestamps such impact is minor. The compromise of a PUBK's private key, even past MAXT, is a problem as the private key can be used to sign invalid times that are in the range MINT to MAXT, and thus violate the good behavior guarantee of the server.
This protocol is designed to obscure all client identifiers. Servers necessarily have persistent long term identities essential to enforcing correct behavior.