| 6lo | P. Thubert, Ed. |
| Internet-Draft | cisco |
| Updates: 6775 (if approved) | E. Nordmark |
| Intended status: Standards Track | Arista Networks |
| Expires: November 5, 2016 | S. Chakrabarti |
| Ericsson | |
| May 4, 2016 |
An Update to 6LoWPAN ND
draft-thubert-6lo-rfc6775-update-00
This specification proposes an update to 6LoWPAN Neighbor Discovery, to clarify the role of the protocol as a registration technique, and provide enhancements to the registration capabilities, in particular for the registration to a backbone router for proxy ND operations.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on November 5, 2016.
Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
The scope of this draft is an IPv6 Low Power Lossy Network (LLN), which can be a simple star or a more complex mesh topology. The LLN may be anchored at an IPv6 Backbone Router (6BBR). The Backbone Routers interconnect the LLNs over a Backbone Link and emulate that the LLN nodes are present on the Backbone using proxy-ND operations.
IPv6 Neighbor Discovery (ND) Optimization for IPv6 over Low-Power Wireless Personal Area Networks(6LoWPANs) [RFC6775] introduced a proactive registration mechanism to IPv6 ND services for nodes belonging to a LLN.
This specification modifies and extends the behaviour and protocol elements of [RFC6775] to enable additional capabilities, in particular the registration to a 6BBR for proxy ND operations [I-D.ietf-6lo-backbone-router].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
Readers are expected to be familiar with all the terms and concepts that are discussed in "Neighbor Discovery for IP version 6" [RFC4861], "IPv6 Stateless Address Autoconfiguration" [RFC4862], "IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs): Overview, Assumptions, Problem Statement, and Goals" [RFC4919], Neighbor Discovery Optimization for Low-power and Lossy Networks [RFC6775] and "Multi-link Subnet Support in IPv6" [I-D.ietf-ipv6-multilink-subnets].
Additionally, this document uses terminology from "Terms Used in Routing for Low-Power and Lossy Networks" [RFC7102] and [I-D.ietf-6tisch-terminology], as well as this additional terminology:
The support of this specification is signaled in Router Advertisement (RA) messages by 6LoWPAN Router (6LR) (how: tbd). A Registering Node that supports this specification will favor registering to a 6LR that indicates support for this specification over that of [RFC6775].
This specification extends the Address Registration Option (ARO) used for the process of address registration. The new ARO is referred to as Extended ARO (EARO), and its semantics are modified as follows:
The address that is being registered with a Neighbor Solicitation (NS) with an EARO is now the Target Address, as opposed to the Source Address as specified in [RFC6775]. This change enables a 6LBR to use an address of his as source to the proxy-registration of an address that belongs to a LLN Node to a 6BBR. This also limits the use of an address as source address before it is registered and the associated Duplicate Address Detection (DAD) is complete.
The Unique ID in the EARO option does no more have to be a MAC address. A new TLV format is introduced and a IANA registry is created for the type (TBD). This enables in particular the use of a Provable Temporary UID (PT-UID) as opposed to burn-in MAC address, the PT-UID providing a trusted anchor by the 6LR and 6LBR to protect the state associated to the node.
The specification introduces a Transaction ID (TID) field in the EARO. The TID MUST be provided by a node that supports this specification and a new T flag MUST be set to indicate so. The T bit can be used to determine whether the peer supports this specification.
The use of link-local addresses as source address for the registration, and the expectation for the scope of those addresses, are clarified as follows:
A link is abstracted as a one-hop point-to-point communication medium. There is no need nor expectation that a link-local address is unique across the whole LLN. A 6LR assumes that the link-local address of a Registering Node is unique as long as the 6LR does not have a conflicting registration for that address.
An exchange between two nodes using link-local addresses implies that they are reachable over one hop and that at least one of the 2 nodes acts as a 6LR. A node MUST register a link-local address to a 6LR in order to obtain link scope reachability from that 6LR beyond the current exchange, and in particular to use it as Source Address to register other addresses.
A consequence of this model is that the Duplicate Address Detection (DAD) process between the 6LR and a 6LoWPAN Border Router (6LBR), which is based on a Duplicate Address Request (DAR) / Duplicate Address Confirmation (DAC) exchange as described in [RFC6775], does not take place for link-local addresses.
It is desired that a 6LR does not need to modify its state associated to the Source Address of an NS(EARO) message. For that reason, when possible, it is RECOMMENDED to use an address that is already registered with a 6LR as source for the NS(EARO) message.
When a Registering Node does not yet have an already-registered address, it MUST register a link-local address, using it as both the Source and the Target Address of an NS(EARO) message. In that case, it is RECOMMENDED to use a link-local address that is (expected to be) globally unique, e.g. derived from a burn-in MAC address.
Since there is no DAR/DAC exchange for link-local addresses, the 6LR may answer immediately to the registration of a link-local address, based solely on its existing state and the Source Link-Layer Option that MUST be placed in the NS(EARO) message as required in [RFC6775].
A node must register its IPv6 Global Unicast IPv6 Addresses (GUA) to a 6LR in order to obtain a global reachability for these addresses via that 6LR. In particular a Registering NODE registering a GUA SHOULD NOT use that GUA as Source Address for the registration to a 6LR that conforms this specification.
What makes this model practical in existing LLNs, which can grow to large number of nodes, is that a subnet may encompass multiple links, which can be LLN links or can be backbone links that federate a number of LLN links, effectively forming a non-broadcast multi-access (NBMA) multi-link subnet (MLSN).
This specification extends 6LoWPAN ND to sequence the registration and serves the requirements expressed Appendix A.1 by enabling the mobility of devices from one LLN to the next based on the complementary work in [I-D.ietf-6lo-backbone-router].
In the context of the the TimeSlotted Channel Hopping (TSCH) mode of [IEEE802154], the 6TiSCH architecture [I-D.ietf-6tisch-architecture] introduces how a 6LoWPAN ND host could connect to the Internet via a RPL mesh Network, but this requires additions to the 6LOWPAN ND protocol to support mobility and reachability in a secured and manageable environment. This specification details the new operations that are required to implement the 6TiSCH architecture and serves the requirements listed in Appendix A.2.
The term LLN is used loosely in this specification to cover multiple types of WLANs and WPANs, including Low-Power Wi-Fi, BLUETOOTH(R) Low Energy, IEEE802.11AH and IEEE802.15.4 wireless meshes, so as to address the requirements discussed in Appendix A.3
This specification can be used by any wireless node to associate at Layer-3 with a 6BBR and register its IPv6 addresses to obtain routing services including proxy-ND operations over the backbone, effectively providing a solution to the requirements expressed in Appendix A.4.
Efficiency aware IPv6 Neighbor Discovery Optimizations [I-D.chakrabarti-nordmark-6man-efficient-nd] suggests that 6LoWPAN ND [RFC6775] can be extended to other types of links beyond IEEE802.15.4 for which it was defined. The registration technique is beneficial when the Link-Layer technique used to carry IPv6 multicast packets is not sufficiently efficient in terms of delivery ratio or energy consumption in the end devices, in particular to enable energy-constrained sleeping nodes. The value of such extension is especially apparent in the case of mobile wireless nodes, to reduce the multicast operations that are related to classical ND ([RFC4861], [RFC4862]) and plague the wireless medium. This serves scalability requirements listed in Appendix A.6.
With the ARO option defined in 6LoWPAN ND [RFC6775], the address being registered and its owner can be uniquely identified and matched with the Binding Table entries of each Backbone Router.
The Enhanced Address Registration Option (EARO) is intended to be used as a replacement to the ARO option within Neighbor Discovery NS and NA messages between a LLN node and its 6LoWPAN Router (6LR), as well as in Duplicate Address Request (DAR) and the Duplicate Address Confirmation (DAC) messages between 6LRs and 6LBRs in LLNs meshes such as 6TiSCH networks.
An NS message with an EARO option is a registration if and only if it also carries an SLLAO option. The AERO option also used in NS and NA messages between Backbone Routers over the backbone link to sort out the distributed registration state, and in that case, it does not carry the SLLAO option and is not confused with a registration.
The EARO extends the ARO and is recognized by the setting of the TID bit. A node that supports this specification MUST always use an EARO as a replacement to an ARO in its registration to a router. This is harmless since the TID bit and fields are reserved in [RFC6775] are ignored by a legacy router. A router that supports this specification answers to an ARO with an ARO and to an EARO with an EARO.
This specification changes the behavior of the peers in a registration flows. To enable backward compatibility, a node that registers to a router that is not known to support this specification MUST behave as prescribed by [RFC6775]. Once the router is known to support this specification, the node MUST obey this specification.
When using the EARO option, the address being registered is found in the Target Address field of the NS and NA messages. This differs from 6LoWPAN ND [RFC6775] which specifies that the address being registered is the source of the NS.
The reason for this change is to enable proxy-registrations on behalf of other nodes in Route-Over meshes, for instance to enable that a RPL root registers addresses on behalf LLN nodes that are deeper in a 6TiSCH mesh. In that case, the Registering Node MUST indicate its own address as source of the ND message and its MAC address in the Source Link-Layer Address Option (SLLAO), since it still expects to get the packets and route them down the mesh. But the Registered Address belongs to another node, the Registered Node, and that address is indicated in the Target Address field of the NS message.
One way of achieving all the above is for a node to first register an address that it owns in order to validate that the router supports this specification, placing the same address in the Source and Target Address fields of the NS message. The node may for instance register an address that is based on EUI-64. For such address, DAD is not required and using the SLLAO option in the NS is actually more amenable with older ND specifications such as ODAD [RFC4429].
Once that first registration is complete, the node knows from the setting of the TID in the response whether the router supports this specification. If this is verified, the node may register other addresses that it owns, or proxy-register addresses on behalf some another node, indicating those addresses being registered in the Target Address field of the NS messages, while using one of its own, already registered, addresses as source.
The format of the EARO option is as follows:
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type | Length = 2 | Status | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Reserved |T| TID | Registration Lifetime | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | + Owner Unique ID (EUI-64 or equivalent) + | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Figure 1: EARO
Option Fields
| Value | Description |
|---|---|
| 0..2 | See [RFC6775]. Note that a Status of 1 "Duplicate Address" applies to the Registered Address. If the Source Address differs from the Registered Address it conflicts with an existing registration, "Invalid Source Address" should be used instead. |
| 3 | Moved: The registration fails because it is not the freshest. |
| 4 | Removed: The binding state was removed. This may be placed in an asynchronous NS(ARO) message, or as the rejection of a proxy registration to a Backbone Router. |
| 5 | Proof requested |
| 6 | Invalid Source Address: The address used as source of the NS(ARO) conflicts with an existing registration, or is not usable on this link, e.g. it is not topologically correct. |
| 7 | Administrative Rejection: The address is reserved for another use by an administrative decision (e.g. placed in a DHCPv6 pool). The Registering Node is requested to form a different address and retry. |
New status values are introduced, their values to be confirmed by IANA:
This specification expects that the link layer is sufficiently protected, either by means of physical or IP security for the Backbone Link or MAC sublayer cryptography. In particular, it is expected that the LLN MAC provides secure unicast to/from the Backbone Router and secure Broadcast from the Backbone Router in a way that prevents tempering with or replaying the RA messages.
The use of EUI-64 for forming the Interface ID in the link-local address prevents the usage of Secure ND ([RFC3971] and [RFC3972]) and address privacy techniques. This specification RECOMMENDS the use of additional protection against address theft such as provided by [I-D.sarikaya-6lo-ap-nd], which guarantees the ownership of the OUID.
When the ownership of the OUID cannot be assessed, this specification limits the cases where the OUID and the TID are multicasted, and obfuscates them in responses to attempts to take over an address.
The LLN nodes depend on the 6LBR and the 6BBR for their operation. A trust model must be put in place to ensure that the right devices are acting in these roles, so as to avoid threats such as black-holing, or bombing attack whereby an impersonated 6LBR would destroy state in the network by using the "Removed" status code.
This document requires the following additions:
Address Registration Option Status Values Registry
| Status | Description |
|---|---|
| 3 | Moved |
| 4 | Removed |
| 5 | Proof requested |
| 6 | Invalid Source Address |
| 7 | Administrative Rejection |
IANA is required to change the registry accordingly
Kudos to Eric Levy-Abegnoli who designed the First Hop Security infrastructure at Cisco.
| [I-D.chakrabarti-nordmark-6man-efficient-nd] | Chakrabarti, S., Nordmark, E., Thubert, P. and M. Wasserman, "IPv6 Neighbor Discovery Optimizations for Wired and Wireless Networks", Internet-Draft draft-chakrabarti-nordmark-6man-efficient-nd-07, February 2015. |
| [I-D.delcarpio-6lo-wlanah] | Vega, L., Robles, I. and R. Morabito, "IPv6 over 802.11ah", Internet-Draft draft-delcarpio-6lo-wlanah-01, October 2015. |
| [I-D.ietf-6lo-6lobac] | Lynn, K., Martocci, J., Neilson, C. and S. Donaldson, "Transmission of IPv6 over MS/TP Networks", Internet-Draft draft-ietf-6lo-6lobac-04, February 2016. |
| [I-D.ietf-6lo-backbone-router] | Thubert, P., "IPv6 Backbone Router", Internet-Draft draft-ietf-6lo-backbone-router-01, March 2016. |
| [I-D.ietf-6lo-dect-ule] | Mariager, P., Petersen, J., Shelby, Z., Logt, M. and D. Barthel, "Transmission of IPv6 Packets over DECT Ultra Low Energy", Internet-Draft draft-ietf-6lo-dect-ule-04, February 2016. |
| [I-D.ietf-6lo-nfc] | Hong, Y. and J. Youn, "Transmission of IPv6 Packets over Near Field Communication", Internet-Draft draft-ietf-6lo-nfc-03, March 2016. |
| [I-D.ietf-6man-rs-refresh] | Nordmark, E., Yourtchenko, A. and S. Krishnan, "IPv6 Neighbor Discovery Optional RS/RA Refresh", Internet-Draft draft-ietf-6man-rs-refresh-01, March 2016. |
| [I-D.ietf-6tisch-architecture] | Thubert, P., "An Architecture for IPv6 over the TSCH mode of IEEE 802.15.4", Internet-Draft draft-ietf-6tisch-architecture-09, November 2015. |
| [I-D.ietf-6tisch-terminology] | Palattella, M., Thubert, P., Watteyne, T. and Q. Wang, "Terminology in IPv6 over the TSCH mode of IEEE 802.15.4e", Internet-Draft draft-ietf-6tisch-terminology-07, March 2016. |
| [I-D.ietf-bier-architecture] | Wijnands, I., Rosen, E., Dolganow, A., Przygienda, A. and S. Aldrin, "Multicast using Bit Index Explicit Replication", Internet-Draft draft-ietf-bier-architecture-03, January 2016. |
| [I-D.ietf-ipv6-multilink-subnets] | Thaler, D. and C. Huitema, "Multi-link Subnet Support in IPv6", Internet-Draft draft-ietf-ipv6-multilink-subnets-00, July 2002. |
| [I-D.nordmark-6man-dad-approaches] | Nordmark, E., "Possible approaches to make DAD more robust and/or efficient", Internet-Draft draft-nordmark-6man-dad-approaches-02, October 2015. |
| [I-D.popa-6lo-6loplc-ipv6-over-ieee19012-networks] | Popa, D. and J. Hui, "6LoPLC: Transmission of IPv6 Packets over IEEE 1901.2 Narrowband Powerline Communication Networks", Internet-Draft draft-popa-6lo-6loplc-ipv6-over-ieee19012-networks-00, March 2014. |
| [I-D.sarikaya-6lo-ap-nd] | Sarikaya, B. and P. Thubert, "Address Protected Neighbor Discovery for Low-power and Lossy Networks", Internet-Draft draft-sarikaya-6lo-ap-nd-02, March 2016. |
| [I-D.vyncke-6man-mcast-not-efficient] | Vyncke, E., Thubert, P., Levy-Abegnoli, E. and A. Yourtchenko, "Why Network-Layer Multicast is Not Always Efficient At Datalink Layer", Internet-Draft draft-vyncke-6man-mcast-not-efficient-01, February 2014. |
| [RFC3810] | Vida, R. and L. Costa, "Multicast Listener Discovery Version 2 (MLDv2) for IPv6", RFC 3810, DOI 10.17487/RFC3810, June 2004. |
| [RFC3971] | Arkko, J., Kempf, J., Zill, B. and P. Nikander, "SEcure Neighbor Discovery (SEND)", RFC 3971, DOI 10.17487/RFC3971, March 2005. |
| [RFC3972] | Aura, T., "Cryptographically Generated Addresses (CGA)", RFC 3972, DOI 10.17487/RFC3972, March 2005. |
| [RFC4919] | Kushalnagar, N., Montenegro, G. and C. Schumacher, "IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs): Overview, Assumptions, Problem Statement, and Goals", RFC 4919, DOI 10.17487/RFC4919, August 2007. |
| [RFC6282] | Hui, J. and P. Thubert, "Compression Format for IPv6 Datagrams over IEEE 802.15.4-Based Networks", RFC 6282, DOI 10.17487/RFC6282, September 2011. |
| [RFC7102] | Vasseur, JP., "Terms Used in Routing for Low-Power and Lossy Networks", RFC 7102, DOI 10.17487/RFC7102, January 2014. |
| [RFC7217] | Gont, F., "A Method for Generating Semantically Opaque Interface Identifiers with IPv6 Stateless Address Autoconfiguration (SLAAC)", RFC 7217, DOI 10.17487/RFC7217, April 2014. |
| [RFC7428] | Brandt, A. and J. Buron, "Transmission of IPv6 Packets over ITU-T G.9959 Networks", RFC 7428, DOI 10.17487/RFC7428, February 2015. |
| [RFC7559] | Krishnan, S., Anipko, D. and D. Thaler, "Packet-Loss Resiliency for Router Solicitations", RFC 7559, DOI 10.17487/RFC7559, May 2015. |
| [RFC7668] | Nieminen, J., Savolainen, T., Isomaki, M., Patil, B., Shelby, Z. and C. Gomez, "IPv6 over BLUETOOTH(R) Low Energy", RFC 7668, DOI 10.17487/RFC7668, October 2015. |
| [RFC7772] | Yourtchenko, A. and L. Colitti, "Reducing Energy Consumption of Router Advertisements", BCP 202, RFC 7772, DOI 10.17487/RFC7772, February 2016. |
This section lists requirements that were discussed at 6lo for an update to 6LoWPAN ND. This specification meets most of them, but those listed in Appendix A.5 which are deferred to a different specification such as [I-D.sarikaya-6lo-ap-nd].
Due to the unstable nature of LLN links, even in a LLN of immobile nodes a 6LoWPAN Node may change its point of attachment to a 6LR, say 6LR-a, and may not be able to notify 6LR-a. Consequently, 6LR-a may still attract traffic that it cannot deliver any more. When links to a 6LR change state, there is thus a need to identify stale states in a 6LR and restore reachability in a timely fashion.
Req1.1: Upon a change of point of attachment, connectivity via a new 6LR MUST be restored timely without the need to de-register from the previous 6LR.
Req1.2: For that purpose, the protocol MUST enable to differentiate between multiple registrations from one 6LoWPAN Node and registrations from different 6LoWPAN Nodes claiming the same address.
Req1.3: Stale states MUST be cleaned up in 6LRs.
Req1.4: A 6LoWPAN Node SHOULD also be capable to register its Address to multiple 6LRs, and this, concurrently.
The point of attachment of a 6LoWPAN Node may be a 6LR in an LLN mesh. IPv6 routing in a LLN can be based on RPL, which is the routing protocol that was defined at the IETF for this particular purpose. Other routing protocols than RPL are also considered by Standard Defining Organizations (SDO) on the basis of the expected network characteristics. It is required that a 6LoWPAN Node attached via ND to a 6LR would need to participate in the selected routing protocol to obtain reachability via the 6LR.
Next to the 6LBR unicast address registered by ND, other addresses including multicast addresses are needed as well. For example a routing protocol often uses a multicast address to register changes to established paths. ND needs to register such a multicast address to enable routing concurrently with discovery.
Multicast is needed for groups. Groups MAY be formed by device type (e.g. routers, street lamps), location (Geography, RPL sub-tree), or both.
The Bit Index Explicit Replication (BIER) Architecture [I-D.ietf-bier-architecture] proposes an optimized technique to enable multicast in a LLN with a very limited requirement for routing state in the nodes.
Related requirements are:
Req2.1: The ND registration method SHOULD be extended in such a fashion that the 6LR MAY advertise the Address of a 6LoWPAN Node over the selected routing protocol and obtain reachability to that Address using the selected routing protocol.
Req2.2: Considering RPL, the Address Registration Option that is used in the ND registration SHOULD be extended to carry enough information to generate a DAO message as specified in [RFC6550] section 6.4, in particular the capability to compute a Path Sequence and, as an option, a RPLInstanceID.
Req2.3: Multicast operations SHOULD be supported and optimized, for instance using BIER or MPL. Whether ND is appropriate for the registration to the 6BBR is to be defined, considering the additional burden of supporting the Multicast Listener Discovery Version 2 [RFC3810] (MLDv2) for IPv6.
6LoWPAN ND [RFC6775] was defined with a focus on IEEE802.15.4 and in particular the capability to derive a unique Identifier from a globally unique MAC-64 address. At this point, the 6lo Working Group is extending the 6LoWPAN Header Compression (HC) [RFC6282] technique to other link types ITU-T G.9959 [RFC7428], Master-Slave/Token-Passing [I-D.ietf-6lo-6lobac], DECT Ultra Low Energy [I-D.ietf-6lo-dect-ule], Near Field Communication [I-D.ietf-6lo-nfc], IEEE802.11ah [I-D.delcarpio-6lo-wlanah], as well as IEEE1901.2 Narrowband Powerline Communication Networks [I-D.popa-6lo-6loplc-ipv6-over-ieee19012-networks] and BLUETOOTH(R) Low Energy [RFC7668].
Related requirements are:
Req3.1: The support of the registration mechanism SHOULD be extended to more LLN links than IEEE 802.15.4, matching at least the LLN links for which an "IPv6 over foo" specification exists, as well as Low-Power Wi-Fi.
Req3.2: As part of this extension, a mechanism to compute a unique Identifier should be provided, with the capability to form a Link-Local Address that SHOULD be unique at least within the LLN connected to a 6LBR discovered by ND in each node within the LLN.
Req3.3: The Address Registration Option used in the ND registration SHOULD be extended to carry the relevant forms of unique Identifier.
Req3.4: The Neighbour Discovery should specify the formation of a site-local address that follows the security recommendations from [RFC7217].
Duty-cycled devices may not be able to answer themselves to a lookup from a node that uses classical ND on a backbone and may need a proxy. Additionally, the duty-cycled device may need to rely on the 6LBR to perform registration to the 6BBR.
The ND registration method SHOULD defend the addresses of duty-cycled devices that are sleeping most of the time and not capable to defend their own Addresses.
Related requirements are:
Req4.1: The registration mechanism SHOULD enable a third party to proxy register an Address on behalf of a 6LoWPAN node that may be sleeping or located deeper in an LLN mesh.
Req4.2: The registration mechanism SHOULD be applicable to a duty-cycled device regardless of the link type, and enable a 6BBR to operate as a proxy to defend the registered Addresses on its behalf.
Req4.3: The registration mechanism SHOULD enable long sleep durations, in the order of multiple days to a month.
In order to guarantee the operations of the 6LoWPAN ND flows, the spoofing of the 6LR, 6LBR and 6BBRs roles should be avoided. Once a node successfully registers an address, 6LoWPAN ND should provide energy-efficient means for the 6LBR to protect that ownership even when the node that registered the address is sleeping.
In particular, the 6LR and the 6LBR then should be able to verify whether a subsequent registration for a given Address comes from the original node.
In a LLN it makes sense to base security on layer-2 security. During bootstrap of the LLN, nodes join the network after authorization by a Joining Assistant (JA) or a Commissioning Tool (CT). After joining nodes communicate with each other via secured links. The keys for the layer-2 security are distributed by the JA/CT. The JA/CT can be part of the LLN or be outside the LLN. In both cases it is needed that packets are routed between JA/CT and the joining node.
Related requirements are:
Req5.1: 6LoWPAN ND security mechanisms SHOULD provide a mechanism for the 6LR, 6LBR and 6BBR to authenticate and authorize one another for their respective roles, as well as with the 6LoWPAN Node for the role of 6LR.
Req5.2: 6LoWPAN ND security mechanisms SHOULD provide a mechanism for the 6LR and the 6LBR to validate new registration of authorized nodes. Joining of unauthorized nodes MUST be impossible.
Req5.3: 6LoWPAN ND security mechanisms SHOULD lead to small packet sizes. In particular, the NS, NA, DAR and DAC messages for a re-registration flow SHOULD NOT exceed 80 octets so as to fit in a secured IEEE802.15.4 frame.
Req5.4: Recurrent 6LoWPAN ND security operations MUST NOT be computationally intensive on the LoWPAN Node CPU. When a Key hash calculation is employed, a mechanism lighter than SHA-1 SHOULD be preferred.
Req5.5: The number of Keys that the 6LoWPAN Node needs to manipulate SHOULD be minimized.
Req5.6: The 6LoWPAN ND security mechanisms SHOULD enable CCM* for use at both Layer 2 and Layer 3, and SHOULD enable the reuse of security code that has to be present on the device for upper layer security such as TLS.
Req5.7: Public key and signature sizes SHOULD be minimized while maintaining adequate confidentiality and data origin authentication for multiple types of applications with various degrees of criticality.
Req5.8: Routing of packets should continue when links pass from the unsecured to the secured state.
Req5.9: 6LoWPAN ND security mechanisms SHOULD provide a mechanism for the 6LR and the 6LBR to validate whether a new registration for a given address corresponds to the same 6LoWPAN Node that registered it initially, and, if not, determine the rightful owner, and deny or clean-up the registration that is duplicate.
Use cases from Automatic Meter Reading (AMR, collection tree operations) and Advanced Metering Infrastructure (AMI, bi-directional communication to the meters) indicate the needs for a large number of LLN nodes pertaining to a single RPL DODAG (e.g. 5000) and connected to the 6LBR over a large number of LLN hops (e.g. 15).
Related requirements are:
Req6.1: The registration mechanism SHOULD enable a single 6LBR to register multiple thousands of devices.
Req6.2: The timing of the registration operation should allow for a large latency such as found in LLNs with ten and more hops.