| BESS Working Group | M. Wang |
| Internet-Draft | Q. Wu |
| Intended status: Standards Track | R. Even |
| Expires: March 31, 2019 | Huawei |
| B. Wen | |
| Comcast | |
| September 27, 2018 |
A YANG Model for VPN Service Performance Monitoring
draft-www-bess-yang-vpn-service-pm-00
As specified in [RFC8345], the data model defined in [RFC8345]introduces vertical layering relationships between networks that can be augmented to cover network/service topologies. This document defines a YANG Model for VPN Service Performance Monitoring that can be used to monitor and manage network Performance between VPN sites and it is an augmentation to the I2RS network topology YANG data model.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on March 31, 2019.
Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
[RFC8345] defines an abstract YANG data model for network/service topologies and inventories. Service topology in [RFC8345] includes the a virtual topology for a service layer above the L1, L2, and L3 layers. This virtual topology has the generic topology elements of node,link, and terminating point. One typical example of a service topology is described in figure 3 of [RFC8345],two VPN service topologies instantiated over a common L3 topology. Each VPN service topology is mapped onto a subset of nodes from the common L3 topology.
In [RFC8299], the 3 types of VPN service topologies proposed for L3VPN service data model are any to any, hub and spoke, hub and spoke disjoint. These VPN topology types can be used to describe how VPN sites are communicating with each other.
This document defines a YANG Model for VPN Service Performance Monitoring that can be used to monitor and manage network Performance between VPN sites and it is an augmentation to the I2RS network topology YANG data model.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. In this document, these words will appear with that interpretation only when in ALL CAPS. Lower case uses of these words are not to be interpreted as carrying [RFC2119] significance.
The following notations are used within the data tree and carry the meaning as below.
<status> <flags> <name> <opts> <type>
<status> is one of:
+ for current
<flags> is one of:
rw for configuration data
ro for non-configuration data
-x for rpcs
-n for notifications
-w for writable
<name> is the name of the node
If the node is augmented into the tree from another module, its name
is printed as <prefix>:<name>.
<opts> is one of:
? for an optional leaf or choice
! for a presence container
* for a leaf-list or list
[<keys>] for a list's keys
(choice)/:(case) Parentheses enclose choice and case nodes,
and case nodes are also marked with a colon (":")
<type> is the name of the type for leafs and leaf-lists
Each node is printed as:
As specified in [RFC8345], the data model defined in [RFC8345] can describe vertical layering relationships between networks that can be augmented to cover network/service topologies. The following figure describes relationships between L3VPN Service Topo and Underlying network:
VPN-1 VPN-2
/ \
L3VPN-Service-topology 1 L3VPN-Service-topology-2
/ | \ / | \
Site-1A site-1B site1-C site-2A Site-2B Site-2C Top-Down
| | | | | | Service Topo
====|==========|=======|=======|=========|=====|===================
+-------+ | \ / / |
Bottoms-up | | \ / / |
Network | | /\ / |
topology | | / \ | |
| | | | | |
node1 node2 node3 node4 node5 node6
PE PE PE PE PE PE
| | | | | |
CE CE CE CE CE CE
layering relationships between L3VPN Service Topo and Underlying network
As shown in figure 1, the Site-1,A,B,C are mapped to node 1,2,3 while Site-2 A,B,C are mapped to node 4,5,6 in the underlying physical network. In this figure, an L3SM has two VPN services topologies with each built on top of one common underlying physical network.
L3VPN service topology 1 is hub and spoke topology while L3VPN service topology 2 is hub and spoke disjoint topology. In L3VPN service topology1, Site-1 A plays the role of hub while Site-2 B and C plays the role of spoke. In L3VPN service topoogy2, Site-2 A and B play the role of hub while Site-2 C plays the role of spoke.
This module describes VPN Service assurance that can be used to monitor and manage network Performance between VPN sites and it is a augmentation to the I2RS network topology YANG data model. The performance monitoring data is augmented to service topology.
+------------+ +---------------------+
|I2RS Network| | VPN Service |
|Topo Model |<---------|Peformance Monitoring|
+------------+ augments | Model |
+---------------------+
An SP must be able to manage the capabilities and characteristics of their VPN services when VPN sites are setup to communicate with each other. VPN service topology such as hub and spoke describes how these VPN sites are communicating with each other.
As described in section 2, once the mapping between VPN Service topology and underlying physical network has been setup, the performance monitoring data per link in the underlying network can be collected using network performance measurement method such as MPLS Loss and Delay Measurement [RFC6374] and The performance monitoring information reflecting the quality of the VPN service such as end to end network performance data between VPN sites can be aggregated or calculated using PCEP solution [RFC5440] or LMAP solution [RFC8194] and fed into data source such as the management system or network devices. The measurement interval and report interval associated with these performance data usually depends on configuration parameters.
For some applications such as service-assurance applications, which must maintain a continuous view of operational data and state, they can use subscription model [I-D.ietf-netconf-yang-push] to subscribe to their interested VPN service performance data in the data source. And then the data source can use VPN service assurance model and push model [I-D.ietf-netconf-yang-push] to publish specific telemetry data to target recipients.
To obtain a snapshot of a large amount of performance data from the network element, service-assurance applications can also use polling based solution such as RPC model to fetch performance data on demand.
This document defines the YANG module "ietf-vpn-svc-pm", which has the following structure
module: ietf-vpn-svc-pm
augment /nw:networks/nw:network/nw:network-types:
+--rw svc-topo-type? identityref
augment /nw:networks/nw:network:
+--rw svc-topo-attributes
+--rw vpn-topo? identityref
Network Level View of the hierarchies
The VPN service performance monitoring model defines only the following minimal set of Network level service topology attributes:
augment /nw:networks/nw:network/nw:node:
+--rw node-attributes
+--rw node-type? identityref
+--rw site-id? string
+--rw site-role? Identityref
Node Level View of the hierarchies
The VPN service performance monitoring model defines only the following minimal set of Node level service topology attributes and constraints:
augment /nw:networks/nw:network/nt:link:
+--ro svc-telemetry-attributes
+--ro loss-statistics
| +--ro direction identityref
| +--ro packet-loss-count? uint32
| +--ro loss-ratio? percentage
| +--ro packet-reorder-count? uint32
| +--ro packets-out-of-seq-count? uint32
| +--ro packets-dup-count? uint32
+--ro delay-statistics
| +--ro direction? identityref
| +--ro min-delay-value? uint32
| +--ro max-delay-value? uint32
| +--ro average-delay-value? uint32
+--ro jitter-statistics
+--ro direction? identityref
+--ro min-jitter-value? uint32
+--ro max-jitter-value? uint32
+--ro average-jitter-value? uint32
Link and Termination point Level View of the hierarchies
The VPN service performance monitoring model defines only the following minimal set of Link level service topology attributes:
This example shows the way for a client to subscribe for the Performance monitoring information for VPN service between VPN sites. The performance monitoring parameter that the client is interested in is end to end loss attribute.
<rpc netconf:message-id="101"
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
<establish-subscription
xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications">
<stream-subtree-filter>
<networks xmlns="urn:ietf:params:xml:ns:yang:ietf-network-topo">
<network>
<network-id>vpn1</network-id>
<node>
<node-id>A</node-id>
<node-type xmlns="urn:ietf:params:xml:ns:yang:ietf-svc-topo">pe</node-type>
</node>
<node>
<node-id>B</node-id>
<node-type xmlns="urn:ietf:params:xml:ns:yang:ietf-svc-topo">pe</node-type>
</node>
<link xmlns="urn:ietf:params:xml:ns:yang:ietf-network-topology">
<link-id>A-B</link-id>
<source>
<source-node>A</source-node>
</source>
<destination>
<dest-node>B</dest-node>
</destination>
<svc-telemetry-attributes
xmlns="urn:ietf:params:xml:ns:yang:ietf-svc-topo">
<loss-statistics>
<packet-loss-count/>
</loss-statistics>
</svc-telemetry-attributes>
</link>
</network>
</networks>
</stream-subtree-filter>
<period xmlns="urn:ietf:params:xml:ns:yang:ietf-yang-push:1.0">500</period>
</establish-subscription>
</rpc>
This example shows the way for the client to use RPC model to fetch performance data on demand,e.g., the client requests packet-loss-count between PE1 in site 1 and PE2 in site 2 belonging to VPN1.
<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"
message-id="1">
<report xmlns="urn:ietf:params:xml:ns:yang:example-service-pm-report">
<networks xmlns="urn:ietf:params:xml:ns:yang:ietf-network-topo">
<network>
<network-id>vpn1</network-id>
<node>
<node-id>A</node-id>
<node-type xmlns="urn:ietf:params:xml:ns:yang:ietf-svc-topo">pe</node-type>
</node>
<node>
<node-id>B</node-id>
<node-type xmlns="urn:ietf:params:xml:ns:yang:ietf-svc-topo">pe</node-type>
</node>
<link-id>A-B</link-id>
<source>
<source-node>A</source-node>
</source>
<destination>
<dest-node>B</dest-node>
</destination>
<svc-telemetry-attributes xmlns="urn:ietf:params:xml:ns:yang:ietf-svc-topo">
<loss-statistics>
<packet-loss-count/>
</loss-statistics>
</svc-telemetry-attributes>
</link>
</report>
</rpc>
<CODE BEGINS> file "ietf-vpn-svc-pm.yang"
module ietf-vpn-svc-pm {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-vpn-svc-pm";
prefix svc-topo;
import ietf-network {
prefix nw;
}
import ietf-network-topology {
prefix nt;
}
import ietf-l3vpn-svc {
prefix l3vpn-svc;
}
organization
"IETF xxx Working Group";
contact
"Zitao Wang: wangzitao@huawei.com
Qin Wu: bill.wu@huawei.com";
description
"This module defines a model for the service topology.";
revision 2018-08-29 {
description
"Initial revision.";
reference "foo";
}
identity service-type {
description
"Base type for service topology";
}
identity l3vpn-svc {
base service-type;
description
"Indentity for layer3 vpn service";
}
identity l2vpn-svc {
base service-type;
description
"Identity for layer2 vpn service";
}
identity node-type {
description
"Base identity for node type";
}
identity pe {
base node-type;
description
"Identity for PE type";
}
identity ce {
base node-type;
description
"Identity for CE type";
}
identity asbr {
base node-type;
description
"Identity for ASBR type";
}
identity p {
base node-type;
description
"Identity for P type";
}
identity direction {
description
"Base Identity for measurement direction including
one way measurement and two way measurement.";
}
identity oneway {
base direction;
description
"Identity for one way measurement.";
}
identity twoway {
base direction;
description
"Identity for two way measurement.";
}
typedef percentage {
type decimal64 {
fraction-digits 5;
range "0..100";
}
description
"Percentage.";
}
grouping link-error-statistics {
description
"Grouping for per link error statistics";
container loss-statistics {
description
"Per link loss statistics.";
leaf direction {
type identityref {
base direction;
}
default "oneway";
description
"Define measurement direction including one way
measurement and two way measurement.";
}
leaf packet-loss-count {
type uint32 {
range "0..4294967295";
}
default "0";
description
"Total received packet drops count.
The value of count will be set to zero (0)
on creation and will thereafter increase
monotonically until it reaches a maximum value
of 2^32-1 (4294967295 decimal), when it wraps
around and starts increasing again from zero.";
}
leaf loss-ratio {
type percentage;
description
"Loss ratio of the packets. Express as percentage
of packets lost with respect to packets sent.";
}
leaf packet-reorder-count {
type uint32 {
range "0..4294967295";
}
default "0";
description
"Total received packet reordered count.
The value of count will be set to zero (0)
on creation and will thereafter increase
monotonically until it reaches a maximum value
of 2^32-1 (4294967295 decimal), when it wraps
around and starts increasing again from zero.";
}
leaf packets-out-of-seq-count {
type uint32 {
range "0..4294967295";
}
description
"Total received out of sequence count.
The value of count will be set to zero (0)
on creation and will thereafter increase
monotonically until it reaches a maximum value
of 2^32-1 (4294967295 decimal), when it wraps
around and starts increasing again from zero..";
}
leaf packets-dup-count {
type uint32 {
range "0..4294967295";
}
description
"Total received packet duplicates count.
The value of count will be set to zero (0)
on creation and will thereafter increase
monotonically until it reaches a maximum value
of 2^32-1 (4294967295 decimal), when it wraps
around and starts increasing again from zero.";
}
}
}
grouping link-delay-statistics {
description
"Grouping for per link delay statistics";
container delay-statistics {
description
"Link delay summarised information. By default,
one way measurement protocol (e.g., OWAMP) is used
to measure delay.";
leaf direction {
type identityref {
base direction;
}
default "oneway";
description
"Define measurement direction including one way
measurement and two way measurement.";
}
leaf min-delay-value {
type uint32;
description
"Minimum delay value observed.";
}
leaf max-delay-value {
type uint32;
description
"Maximum delay value observed.";
}
leaf average-delay-value {
type uint32;
description
"Average delay value observed.";
}
}
}
grouping link-jitter-statistics {
description
"Grouping for per link jitter statistics";
container jitter-statistics {
description
"Link jitter summarised information. By default,
jitter is measured using IP Packet Delay Variation
(IPDV) as defined in RFC3393.";
leaf direction {
type identityref {
base direction;
}
default "oneway";
description
"Define measurement direction including one way
measurement and two way measurement.";
}
leaf min-jitter-value {
type uint32;
description
"Minimum jitter value observed.";
}
leaf max-jitter-value {
type uint32;
description
"Maximum jitter value observed.";
}
leaf average-jitter-value {
type uint32;
description
"Average jitter value observed.";
}
}
}
augment "/nw:networks/nw:network/nw:network-types" {
description
"Augment the network-types with service topologyies types";
leaf svc-topo-type {
type identityref {
base service-type;
}
description
"Identify the topology type to be composited service topology";
}
}
augment "/nw:networks/nw:network" {
description
"Augment the network with service topology attributes";
container svc-topo-attributes {
leaf vpn-topology {
type identityref {
base l3vpn-svc:vpn-topology;
}
description
"VPN service topology, e.g. hub-spoke, any-to-any, hub-spoke-disjoint, etc";
}
description
"Container for vpn services";
}
}
augment "/nw:networks/nw:network/nw:node" {
description
"Augment the network node with serice attributes";
container node-attributes {
leaf node-type {
type identityref {
base node-type;
}
description
"Node type, e.g. PE, P, ASBR, etc";
}
leaf site-id {
type string;
description
"Asscoiated vpn site";
}
leaf site-role {
type identityref {
base l3vpn-svc:site-role;
}
default "l3vpn-svc:any-to-any-role";
description
"Role of the site in the IP VPN.";
}
description
"Container for service topology attributes";
}
}
augment "/nw:networks/nw:network/nt:link" {
description
"Augment the network topology link with vpn service attributes";
container svc-telemetry-attributes {
config false;
uses link-error-statistics;
uses link-delay-statistics;
uses link-jitter-statistics;
description
"Container for service telemetry attributes";
}
}
}
<CODE ENDS>
The YANG modules defined in this document MAY be accessed via the RESTCONF protocol [RFC8040] or NETCONF protocol ([RFC6241]). The lowest RESTCONF or NETCONF layer requires that the transport-layer protocol provides both data integrity and confidentiality, see Section 2 in [RFC8040] and [RFC6241]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH)[RFC6242] . The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS [RFC5246].
The NETCONF access control model [RFC6536] provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content.
There are a number of data nodes defined in this YANG module that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability:
This document registers a URI in the IETF XML registry [RFC3688]. Following the format in [RFC3688], the following registration is requested to be made:
--------------------------------------------------------------------- URI: urn:ietf:params:xml:ns:yang:ietf-vpn-svc-pm Registrant Contact: The IESG. XML: N/A, the requested URI is an XML namespace. ---------------------------------------------------------------------
This document registers a YANG module in the YANG Module Names registry [RFC6020].
--------------------------------------------------------------------- Name: ietf-vpn-svc-pm Namespace: urn:ietf:params:xml:ns:yang:ietf-vpn-svc-pm Prefix: vnrsc Reference: RFC xxxx ---------------------------------------------------------------------