Internet DRAFT - draft-alvestrand-rtcweb-msid
draft-alvestrand-rtcweb-msid
Network Working Group H. Alvestrand
Internet-Draft Google
Intended status: Standards Track May 29, 2012
Expires: November 30, 2012
Cross Session Stream Identification in the Session Description Protocol
draft-alvestrand-rtcweb-msid-02
Abstract
This document specifies a grouping mechanism for RTP media streams
that can be used to specify relations betweeen media streams within
different RTP sessions.
This mechanism is used to signal the association between the RTP
concept of SSRC and the WebRTC concept of "media stream" / "media
stream track" using SDP signalling.
This document is an input document for discussion. It should be
discussed in the RTCWEB WG list, rtcweb@ietf.org.
Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on November 30, 2012.
Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the
Alvestrand Expires November 30, 2012 [Page 1]
Internet-Draft MSID in SDP May 2012
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Why A New Mechanism Is Needed . . . . . . . . . . . . . . 3
1.2. Application to the WEBRTC MediaStream . . . . . . . . . . 3
2. The Msid Mechanism . . . . . . . . . . . . . . . . . . . . . . 4
3. The Msid-Semantic Attribute . . . . . . . . . . . . . . . . . 5
4. Applying Msid to WebRTC Media Streams . . . . . . . . . . . . 5
4.1. Handling of non-signalled tracks . . . . . . . . . . . . . 6
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 7
6. Security Considerations . . . . . . . . . . . . . . . . . . . 8
7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 8
8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8.1. Normative References . . . . . . . . . . . . . . . . . . . 8
8.2. Informative References . . . . . . . . . . . . . . . . . . 8
Appendix A. Design considerations, open questions and and
alternatives . . . . . . . . . . . . . . . . . . . . 9
Appendix B. Change log . . . . . . . . . . . . . . . . . . . . . 10
B.1. Changes from -00 to -01 . . . . . . . . . . . . . . . . . 10
B.2. Changes from -01 to -02 . . . . . . . . . . . . . . . . . 10
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 10
Alvestrand Expires November 30, 2012 [Page 2]
Internet-Draft MSID in SDP May 2012
1. Introduction
1.1. Why A New Mechanism Is Needed
There exist cases where an application using RTP and SDP needs to
signal some relationship between RTP media streams (packets carried
using a single SSRC) that may be carried in either the same RTP
session or different RTP sessions.
When all SSRCs are carried in a single RTP session, the "a=ssrc-
group" mechanism [RFC5576] can be used.
When each RTP session carries one and only one SSRC, the SDP grouping
framework [RFC5888] can be used.
However, there are use cases (some of which are discussed in
[I-D.westerlund-avtcore-multiplex-architecture] ) where neither of
these approaches is appropriate; for instance, there may be a need to
signal a relationship between a video track in one RTP session and an
audio track in another RTP session. In those cases, a new mechanism
is needed.
(Note: When the bundle mechanism,
[I-D.ietf-mmusic-sdp-bundle-negotiation], is used, the extension is
still needed to link SSRCs under different m= lines, even when they
are in the same RTP session).
In addition, there is sometimes the need for an application to
specify some application-level information about the association
between the SSRC and the group. This is not possible using either of
the frameworks above.
1.2. Application to the WEBRTC MediaStream
The W3C WebRTC API specification [W3C.WD-webrtc-20120209] specifies
that communication between WebRTC entities is done via MediaStreams,
which contain MediaStreamTracks. A MediaStreamTrack is generally
carried using a single SSRC in an RTP session (forming an RTP media
stream. The collision of terminology is unfortunate.) There might
possibly with additional SSRCs, possibly within additional RTP
sessions, in order to support functionality like forward error
correction or simulcast. This complication is ignored below.
In the RTP specification, media streams are identified using the SSRC
field. Streams are grouped into RTP Sessions, and also carry a
CNAME. Neither CNAME nor RTP session correspond to a MediaStream.
Therefore, the association of an RTP media stream to MediaStreams
need to be explicitly signalled.
Alvestrand Expires November 30, 2012 [Page 3]
Internet-Draft MSID in SDP May 2012
The marking needs to be on a per-SSRC basis, since one RTP session
can carry media from multiple MediaStreams, and one MediaStream can
have media in multiple RTP sessions. This means that the [RFC4574]
"label" attribute, which is used to label RTP sessions, is not usable
for this purpose.
The marking needs to also carry the unique identifier of the RTP
media stream as a MediaStreamTrack within the media stream; this is
done using a single letter to identify whether it belongs in the
video or audio track list, and the MediaStreamTrack's position within
that array.
This usage is described in Section 4.
2. The Msid Mechanism
Grouping of SSRCs is done via an "msid" attribute attached to the
SSRC in the SDP description, using the "Source Specific Media
Attribute" mechanism [RFC5576]:
a=ssrc:1234 msid:examplefoo v1
The ID is a randomly-generated string of ASCII characters chosen from
0-9, a-z, A-Z and - (hyphen), consisting of between 1 and 64
characters. It MUST be unique among the ID values used in the same
SDP session.
The value "default" (all lower case) has special meaning, and MUST
NOT be generated. Values starting with "example" (all lower case)
are reserved for documentation, and MUST NOT be generated by an
implementation.
Application data is carried on the same line as the ID, separated
from the ID by a space.
ABNF[RFC5234] grammar:
msidattribute = "msid:" identifier [ " " appdata ]
identifier = 1*64 ("0".."9" / "a".."z" / "-")
appdata = 1*64 ("0".."9" / "a".."z" / "-")
(Note: one possible generation algorithm is to generate 6 random
bytes, base64 encode them (giving 8 bytes), and prefixing with a
letter that is neither "d" nor "e". Another possibility is using
some form of UUID.)
Alvestrand Expires November 30, 2012 [Page 4]
Internet-Draft MSID in SDP May 2012
The ID uniquely identifies a group within the scope of an SDP
description.
There may be multiple msid attributes on a single SSRC.
3. The Msid-Semantic Attribute
In order to fully reproduce the semantics of the SDP and SSRC
grouping frameworks, a session-level attribute is defined for
signalling the semantics associated with an msid grouping.
This OPTIONAL attribute gives the message ID and its group semantic.
a=msid-semantic: examplefoo LS
The ABNF of msid-semantic is:
msid-semantic-attr = "msid-semantic:" " " msid token
token = <as defined in RFC 4566>
The semantic field may hold values from the IANA registries
"Semantics for the "ssrc-group" SDP Attribute" and "Semantics for the
"group" SDP Attribute".
4. Applying Msid to WebRTC Media Streams
The semantic for WebRTC Media Streams is "WMS".
The value of the msid corresponds to the "id" attribute of a
MediaStream. (note: as of Jan 11, 2012, this is called "label". The
word "label" means many other things, so the same word should not be
used.)
In a WebRTC-compatible SDP description, all SSRCs intending to be
sent from one peer will be identified in the SDP generated by that
entity.
The appdata for a WebRTC MediaStreamTrack consists of the track type
and the track number; the track type is encoded as the single letter
"a" (audio) or "v" (video), and the track number is encoded as a
decimal integer with no leading zeroes. The first track is track
zero, and is identified as "a0" for audio, and "v0" for video.
When an SDP description is updated, a specific msid continues to
refer to the same media stream; an msid value MUST NOT be reused for
another media stream within a PeerConnection's lifetime.
Alvestrand Expires November 30, 2012 [Page 5]
Internet-Draft MSID in SDP May 2012
The following are the rules for handling updates of the list of SSRCs
and their msid values.
o When a new msid value occurs in the description, the recipient can
signal to its application that a new media stream has been added.
o When a description is updated to have more SSRCs with the same
msid value, the recipient can signal to its application that new
media stream tracks have been added to the media stream.
o When a description is updated to no longer list the msid value on
a specific ssrc, the recipient can signal to its application that
the corresponding media stream track has been closed.
o When a description is updated to no longer list the msid value on
any ssrc, the recipient can signal to its application that the
media stream has been closed.
OPEN ISSUE: Exactly when should the recipient signal that the track
is closed? When the msid value disappears from the description, when
the SSRC disappears by the rules of RFC 3550 section 6.3.4 (BYE
packet received) and 6.3.5 (timeout), any of the above, or some
combination of the above?
4.1. Handling of non-signalled tracks
Pre-WebRTC entities will not send msid. This means that there will
be some incoming RTP packets with SSRCs where the recipient does not
know about a corresponding MediaStream id.
Handling will depend on whether or not any SSRCs are signalled in the
relevant RTP session. There are two cases:
o No SSRC is signalled with an msid attribute. The SDP session is
assumed to be a backwards-compatible session. All incoming SSRCs,
on all RTP sessions that are part of the SDP session, are assumed
to belong to a single media stream. The ID of this media stream
is "default".
o Some SSRCs are signalled with an msid attribute. In this case,
the session is WebRTC compatible, and the newly arrived SSRCs are
either caused by a bug or by timing skew between the arrival of
the media packets and the SDP description. These packets MAY be
discarded, or they MAY be buffered for a while in order to allow
immediate startup of the media stream when the SDP description is
updated. The arrival of media packets MUST NOT cause a new
MediaStreamTrack to be created.
Alvestrand Expires November 30, 2012 [Page 6]
Internet-Draft MSID in SDP May 2012
Note: This means that it is wise to include at least one a=ssrc: line
with an msid attribute, even when no media streams are yet attached
to the session. (Alternative: Mark the RTP session explicitly as "I
will signal the media stream tracks explicitly").
It follows from the above that media stream tracks in the "default"
media stream cannot be closed by signalling; the application must
instead signal these as closed when either an RTCP BYE packet or the
absence of media for a defined interval <what interval?> indicates
that the stream is gone.
5. IANA Considerations
This document requests IANA to register the "msid" attribute in the
"att-field (source level)" registry within the SDP parameters
registry, according to the procedures of [RFC5576]
The required information is:
o Contact name, email: IETF, contacted via rtcweb@ietf.org, or a
successor address designated by IESG
o Attribute name: msid
o Long-form attribute name: Media stream group Identifier
o The attribute value contains only ASCII characters, and is
therefore not subject to the charset attribute.
o The attribute gives an association over a set of SSRCs,
potentially in different RTP sessions. It can be used to signal
the relationship between a WebRTC MediaStream and a set of SSRCs.
o The details of appropriate values are given in RFC XXXX.
This document requests IANA to register the "WMS" semantic within the
"Semantics for the "ssrc-group" SDP Attribute" registry within the
SDP parameters registry.
The required information is:
o Description: WebRTC Media Stream, as given in RFC XXXX.
o Token: WMS
o Standards track reference: RFC XXXX
Alvestrand Expires November 30, 2012 [Page 7]
Internet-Draft MSID in SDP May 2012
IANA is requested to replace "RFC XXXX" with the RFC number of this
document upon publication.
6. Security Considerations
An adversary with the ability to modify SDP descriptions has the
ability to switch around tracks between media streams. This is a
special case of the general security consideration that modification
of SDP descriptions needs to be confined to entities trusted by the
application.
No attacks that are relevant to the browser's security have been
identified that depend on this mechanism.
7. Acknowledgements
This note is based on sketches from, among others, Justin Uberti and
Cullen Jennings.
8. References
8.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234, January 2008.
[RFC5576] Lennox, J., Ott, J., and T. Schierl, "Source-Specific
Media Attributes in the Session Description Protocol
(SDP)", RFC 5576, June 2009.
[W3C.WD-webrtc-20120209]
Bergkvist, A., Burnett, D., Narayanan, A., and C.
Jennings, "WebRTC 1.0: Real-time Communication Between
Browsers", World Wide Web Consortium WD WD-webrtc-
20120209, February 2012,
<http://www.w3.org/TR/2012/WD-webrtc-20120209>.
8.2. Informative References
[I-D.ietf-mmusic-sdp-bundle-negotiation]
Holmberg, C. and H. Alvestrand, "Multiplexing Negotiation
Using Session Description Protocol (SDP) Port Numbers",
Alvestrand Expires November 30, 2012 [Page 8]
Internet-Draft MSID in SDP May 2012
draft-ietf-mmusic-sdp-bundle-negotiation-00 (work in
progress), February 2012.
[I-D.westerlund-avtcore-multiplex-architecture]
Westerlund, M., Burman, B., and C. Perkins, "RTP
Multiplexing Architecture",
draft-westerlund-avtcore-multiplex-architecture-00 (work
in progress), October 2011.
[RFC4574] Levin, O. and G. Camarillo, "The Session Description
Protocol (SDP) Label Attribute", RFC 4574, August 2006.
[RFC5888] Camarillo, G. and H. Schulzrinne, "The Session Description
Protocol (SDP) Grouping Framework", RFC 5888, June 2010.
Appendix A. Design considerations, open questions and and alternatives
This appendix should be deleted before publication as an RFC.
One suggested mechanism has been to use CNAME instead of a new
attribute. This was abandoned because CNAME identifies a
synchronization context; one can imagine both wanting to have tracks
from the same synchronization context in multiple media streams and
wanting to have tracks from multiple synchronization contexts within
one media stream.
Another suggestion has been to put the msid value within an attribute
of RTCP SR (sender report) packets. This doesn't offer the ability
to know that you have seen all the tracks currently configured for a
media stream.
There has been a suggestion that this mechanism could be used to mute
tracks too. This is not done at the moment.
The special value "default" and the reservation of "example*" seems
bothersome; apart from that, it's a random string. It's uncertain
whether "example" has any benefit.
An alternative to the "default" media stream is to let each new media
stream track without a msid attribute create its own media stream.
Input on this question is sought.
Discarding of incoming data when the SDP description isn't updated
yet (section 3) may cause clipping. However, the same issue exists
when crypto keys aren't available. Input sought.
There's been a suggestion that acceptable SSRCs should be signalled
Alvestrand Expires November 30, 2012 [Page 9]
Internet-Draft MSID in SDP May 2012
in a response, giving a recipient the ability to say "no" to certain
SSRCs. This is not supported in the current version of this
document.
This specification reuses the ssrc-group semantics registry for this
semantic, on the argument that the WMS purpose is more similar to an
SSRC grouping than a session-level grouping, and allows values from
both registries, on the argument that some semantics (like LS) are
well defined for MSID. Input sought.
Appendix B. Change log
This appendix should be deleted before publication as an RFC.
B.1. Changes from -00 to -01
Added track identifier.
Added inclusion-by-reference of draft-lennox-mmusic-source-selection
for track muting.
Some rewording.
B.2. Changes from -01 to -02
Split document into sections describing a generic grouping mechanism
and sections describing the application of this grouping mechanism to
the WebRTC MediaStream concept.
Removed the mechanism for muting tracks, since this is not central to
the MSID mechanism.
Author's Address
Harald Alvestrand
Google
Kungsbron 2
Stockholm, 11122
Sweden
Email: harald@alvestrand.no
Alvestrand Expires November 30, 2012 [Page 10]