Internet DRAFT - draft-bortzmeyer-rfc7816bis
draft-bortzmeyer-rfc7816bis
Network Working Group S. Bortzmeyer
Internet-Draft AFNIC
Obsoletes: 7816 (if approved) P. Hoffman
Intended status: Standards Track ICANN
Expires: January 18, 2019 July 17, 2018
DNS Query Name Minimisation to Improve Privacy
draft-bortzmeyer-rfc7816bis-00
Abstract
This document describes a technique to improve DNS privacy, a
technique called "QNAME minimisation", where the DNS resolver no
longer sends the full original QNAME to the upstream name server.
RFC EDITOR: PLEASE REMOVE BEFORE PUBLICATION. The original [RFC7816]
had the experimental status. This document is intended for the
standards track. It should be discussed in the IETF DNSOP (DNS
Operations) Working Group, through its mailing list. The source of
the document, as well as a list of open issues, is currently kept at
Framagit [1].
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on January 18, 2019.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 1]
Internet-Draft QNAME Minimisation July 2018
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction and Background . . . . . . . . . . . . . . . . . 2
2. QNAME Minimisation . . . . . . . . . . . . . . . . . . . . . 3
3. Possible Issues . . . . . . . . . . . . . . . . . . . . . . . 4
4. Protocol and Compatibility Discussion . . . . . . . . . . . . 6
5. Operational Considerations . . . . . . . . . . . . . . . . . 6
6. Performance Considerations . . . . . . . . . . . . . . . . . 7
7. Results of the Experimentation . . . . . . . . . . . . . . . 7
8. Security Considerations . . . . . . . . . . . . . . . . . . . 8
9. Implementation status - RFC EDITOR: PLEASE REMOVE BEFORE
PUBLICATION . . . . . . . . . . . . . . . . . . . . . . . . . 8
10. References . . . . . . . . . . . . . . . . . . . . . . . . . 9
10.1. Normative References . . . . . . . . . . . . . . . . . . 9
10.2. Informative References . . . . . . . . . . . . . . . . . 9
10.3. URIs . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Appendix A. An Algorithm to Perform QNAME Minimisation . . . . . 10
Appendix B. Alternatives . . . . . . . . . . . . . . . . . . . . 11
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changes from RFC 7816 . . . . . . . . . . . . . . . . . . . . . . 12
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 12
1. Introduction and Background
The problem statement is described in
[I-D.bortzmeyer-dprive-rfc7626-bis]. The terminology ("QNAME",
"resolver", etc.) is defined in [I-D.ietf-dnsop-terminology-bis].
This specific solution is not intended to fully solve the DNS privacy
problem; instead, it should be viewed as one tool amongst many.
QNAME minimisation follows the principle explained in Section 6.1 of
[RFC6973]: the less data you send out, the fewer privacy problems
you have.
Before QNAME minimisation, when a resolver received the query "What
is the AAAA record for www.example.com?", it sent to the root
(assuming a cold resolver, whose cache is empty) the very same
question. Sending the full QNAME to the authoritative name server
was a tradition, not a protocol requirement. In a conversation with
the author in January 2015, Paul Mockapetris explained that this
tradition comes from a desire to optimise the number of requests,
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 2]
Internet-Draft QNAME Minimisation July 2018
when the same name server is authoritative for many zones in a given
name (something that was more common in the old days, where the same
name servers served .com and the root) or when the same name server
is both recursive and authoritative (something that is strongly
discouraged now). Whatever the merits of this choice at this time,
the DNS is quite different now.
2. QNAME Minimisation
The idea is to minimise the amount of data sent from the DNS resolver
to the authoritative name server. In the example in the previous
section, sending "What are the NS records for .com?" would have been
sufficient (since it will be the answer from the root anyway). The
rest of this section describes the recommended way to do QNAME
minimisation -- the way that maximises privacy benefits (other
alternatives are discussed in the appendices).
Instead of sending the full QNAME and the original QTYPE upstream, a
resolver that implements QNAME minimisation and does not already have
the answer in its cache sends a request to the name server
authoritative for the closest known ancestor of the original QNAME.
The request is done with:
o the QTYPE NS
o the QNAME that is the original QNAME, stripped to just one label
more than the zone for which the server is authoritative
For example, a resolver receives a request to resolve
foo.bar.baz.example. Let's assume that it already knows that
ns1.nic.example is authoritative for .example and the resolver does
not know a more specific authoritative name server. It will send the
query QTYPE=NS,QNAME=baz.example to ns1.nic.example.
The minimising resolver works perfectly when it knows the zone cut
(zone cuts are described in Section 6 of [RFC2181]). But zone cuts
do not necessarily exist at every label boundary. If we take the
name www.foo.bar.example, it is possible that there is a zone cut
between "foo" and "bar" but not between "bar" and "example". So,
assuming that the resolver already knows the name servers of
.example, when it receives the query "What is the AAAA record of
www.foo.bar.example?", it does not always know where the zone cut
will be. To find the zone cut, it will query the .example
name servers for the NS records for bar.example. It will get a
NODATA response, indicating that there is no zone cut at that point,
so it has to query the .example name servers again with one more
label, and so on. (Appendix A describes this algorithm in deeper
detail.)
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 3]
Internet-Draft QNAME Minimisation July 2018
Here are more detailed examples of queries with QNAME minimisation:
www.isc.org, cold cache, aggressive algorithm:
QTYPE QNAME TARGET NOTE
NS org root nameserver
NS isc.org Afilias nameserver
NS www.isc.org ISC nameserver "www" may be delegated
A www.isc.org ISC nameserver
www.isc.org, cold cache, lazy algorithm (for a cold cache, it is the
same algorithm as now):
QTYPE QNAME TARGET NOTE
A www.isc.org root nameserver
A www.isc.org Afilias nameserver
A www.isc.org ISC nameserver
www.isc.org, warm cache (all NS RRsets are known), both algorithms:
QTYPE QNAME TARGET NOTE
A www.isc.org ISC nameserver
www.example.org, warm cache (but for isc.org only, example.org's
NS RRset is not known), aggressive algorithm
QTYPE QNAME TARGET NOTE
NS example.org Afilias nameserver
NS www.example.org Example nameserver
A www.example.org Example nameserver
Since the information about the zone cuts will be stored in the
resolver's cache, the performance cost is probably reasonable.
Section 6 discusses this performance discrepancy further.
Note that DNSSEC-validating resolvers already have access to this
information, since they have to know the zone cut (the DNSKEY record
set is just below; the DS record set is just above).
3. Possible Issues
TODO may be remove the whole section now that it is no longer
experimental?
QNAME minimisation is legal, since the original DNS RFCs do not
mandate sending the full QNAME. So, in theory, it should work
without any problems. However, in practice, some problems may occur
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 4]
Internet-Draft QNAME Minimisation July 2018
(see [Huque-QNAME-Min] for an analysis and [Huque-QNAME-storify] for
an interesting discussion on this topic).
Some broken name servers do not react properly to QTYPE=NS requests.
For instance, some authoritative name servers embedded in load
balancers reply properly to A queries but send REFUSED to NS queries.
This behaviour is a protocol violation, and there is no need to stop
improving the DNS because of such behaviour. However, QNAME
minimisation may still work with such domains, since they are only
leaf domains (no need to send them NS requests). Such a setup breaks
more than just QNAME minimisation. It breaks negative answers, since
the servers don't return the correct SOA, and it also breaks anything
dependent upon NS and SOA records existing at the top of the zone.
Another way to deal with such incorrect name servers would be to try
with QTYPE=A requests (A being chosen because it is the most common
and hence a QTYPE that will always be accepted, while a QTYPE NS may
ruffle the feathers of some middleboxes). Instead of querying
name servers with a query "NS example.com", we could use
"A _.example.com" and see if we get a referral. TODO this is what
Unbound does
A problem can also appear when a name server does not react properly
to ENTs (Empty Non-Terminals). If ent.example.com has no resource
records but foobar.ent.example.com does, then ent.example.com is an
ENT. Whatever the QTYPE, a query for ent.example.com must return
NODATA (NOERROR / ANSWER: 0). However, some name servers incorrectly
return NXDOMAIN for ENTs. If a resolver queries only
foobar.ent.example.com, everything will be OK, but if it implements
QNAME minimisation, it may query ent.example.com and get an NXDOMAIN.
See also Section 3 of [DNS-Res-Improve] for the other bad
consequences of this bad behaviour.
A possible solution, currently implemented in Knot or Unbound, is to
retry with the full query when you receive an NXDOMAIN. It works,
but it is not ideal for privacy.
Other practices that do not conform to the DNS protocol standards may
pose a problem: there is a common DNS trick used by some web hosters
that also do DNS hosting that exploits the fact that the DNS protocol
(pre-DNSSEC) allows certain serious misconfigurations, such as parent
and child zones disagreeing on the location of a zone cut.
Basically, they have a single zone with wildcards for each TLD, like:
*.example. 60 IN A 192.0.2.6
(They could just wildcard all of "*.", which would be sufficient. We
don't know why they don't do it.)
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 5]
Internet-Draft QNAME Minimisation July 2018
This lets them have many web-hosting customers without having to
configure thousands of individual zones on their name servers. They
just tell the prospective customer to point their NS records at the
hoster's name servers, and the web hoster doesn't have to provision
anything in order to make the customer's domain resolve. NS queries
to the hoster will therefore not give the right result, which may
endanger QNAME minimisation (it will be a problem for DNSSEC, too).
4. Protocol and Compatibility Discussion
QNAME minimisation is compatible with the current DNS system and
therefore can easily be deployed; since it is a unilateral change to
the resolver, it does not change the protocol. (Because it is a
unilateral change, resolver implementers may do QNAME minimisation in
slightly different ways; see the appendices for examples.)
One should note that the behaviour suggested here (minimising the
amount of data sent in QNAMEs from the resolver) is NOT forbidden by
Section 5.3.3 of [RFC1034] or Section 7.2 of [RFC1035]. As stated in
Section 1, the current method, sending the full QNAME, is not
mandated by the DNS protocol.
One may notice that many documents that explain the DNS and that are
intended for a wide audience incorrectly describe the resolution
process as using QNAME minimisation (e.g., by showing a request going
to the root, with just the TLD in the query). As a result, these
documents may confuse readers that use them for privacy analysis.
5. Operational Considerations
TODO what to do if the resolver forwards? Unbound disables QNAME
minimisation in that case, since the forwarder will see everything,
anyway. What should a minimising resolver do when forwading the
request to a forwarder, not to an authoritative name server? Send
the full qname? Minimises? (But how since we do not know the zone
cut?)
The administrators of the forwarders, and of the authoritative
name servers, will get less data, which will reduce the utility of
the statistics they can produce (such as the percentage of the
various QTYPEs).
DNS administrators are reminded that the data on DNS requests that
they store may have legal consequences, depending on your
jurisdiction (check with your local lawyer).
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 6]
Internet-Draft QNAME Minimisation July 2018
6. Performance Considerations
The main goal of QNAME minimisation is to improve privacy by sending
less data. However, it may have other advantages. For instance, if
a root name server receives a query from some resolver for A.example
followed by B.example followed by C.example, the result will be three
NXDOMAINs, since .example does not exist in the root zone. Under
query name minimisation, the root name servers would hear only one
question (for .example itself) to which they could answer NXDOMAIN,
thus opening up a negative caching opportunity in which the full
resolver could know a priori that neither B.example nor C.example
could exist. Thus, in this common case the total number of upstream
queries under QNAME minimisation would be counterintuitively less
than the number of queries under the traditional iteration (as
described in the DNS standard). TODO mention [RFC8020]?
QNAME minimisation may also improve lookup performance for TLD
operators. For a typical TLD, delegation-only, and with delegations
just under the TLD, a two-label QNAME query is optimal for finding
the delegation owner name.
QNAME minimisation can decrease performance in some cases -- for
instance, for a deep domain name (like
www.host.group.department.example.com, where
host.group.department.example.com is hosted on example.com's
name servers). Let's assume a resolver that knows only the
name servers of example.com. Without QNAME minimisation, it would
send these example.com name servers a query for
www.host.group.department.example.com and immediately get a specific
referral or an answer, without the need for more queries to probe for
the zone cut. For such a name, a cold resolver with QNAME
minimisation will, depending on how QNAME minimisation is
implemented, send more queries, one per label. Once the cache is
warm, there will be no difference with a traditional resolver.
Actual testing is described in [Huque-QNAME-Min]. Such deep domains
are especially common under ip6.arpa.
7. Results of the Experimentation
TODO various experiences from actual deployments, problems heard.
TODO the Knot bug #339 https://gitlab.labs.nic.cz/knot/knot-resolver/
issues/339? TODO Problems with AWS https://forums.aws.amazon.com/
thread.jspa?threadID=269116?
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 7]
Internet-Draft QNAME Minimisation July 2018
8. Security Considerations
QNAME minimisation's benefits are clear in the case where you want to
decrease exposure to the authoritative name server. But minimising
the amount of data sent also, in part, addresses the case of a wire
sniffer as well as the case of privacy invasion by the servers.
(Encryption is of course a better defense against wire sniffers, but,
unlike QNAME minimisation, it changes the protocol and cannot be
deployed unilaterally. Also, the effect of QNAME minimisation on
wire sniffers depends on whether the sniffer is on the DNS path.)
QNAME minimisation offers zero protection against the recursive
resolver, which still sees the full request coming from the stub
resolver.
All the alternatives mentioned in Appendix B decrease privacy in the
hope of improving performance. They must not be used if you want
maximum privacy.
9. Implementation status - RFC EDITOR: PLEASE REMOVE BEFORE PUBLICATION
This section records the status of known implementations of the
protocol defined by this specification at the time of posting of this
Internet-Draft, and is based on a proposal described in [RFC7942].
The description of implementations in this section is intended to
assist the IETF in its decision processes in progressing drafts to
RFCs. Please note that the listing of any individual implementation
here does not imply endorsement by the IETF. Furthermore, no effort
has been spent to verify the information presented here that was
supplied by IETF contributors. This is not intended as, and must not
be construed to be, a catalog of available implementations or their
features. Readers are advised to note that other implementations may
exist.
According to [RFC7942], "this will allow reviewers and working groups
to assign due consideration to documents that have the benefit of
running code, which may serve as evidence of valuable experimentation
and feedback that have made the implemented protocols more mature.
It is up to the individual working groups to use this information as
they see fit".
Unbound has QNAME minimisation for several years, and it is now the
default. It has two modes, strict (no workaround for broken
authoritative name servers) and "lax" (retries when there is a
NXDOMAIN). TODO Ralph Dolmans talk at OARC https://indico.dns-
oarc.net/event/22/contributions/332/attachments/310/542/
unbound_qnamemin_oarc24.pdf
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 8]
Internet-Draft QNAME Minimisation July 2018
Knot resolver also has QNAME minimisation since 2016, and it is
activated by default.
BIND has QNAME minimisation since BIND 9.13.2, released in july 2018.
Like Unbound, it has several modes, with or without workarounds for
broken authoritative name servers.
PowerDNS does not have QNAME minimisation. TODO
https://github.com/PowerDNS/pdns/issues/2311
The public DNS resolver at Cloudflare ("1.1.1.1") has QNAME
minimisation (it uses Knot).
10. References
10.1. Normative References
[RFC1034] Mockapetris, P., "Domain names - concepts and facilities",
STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987,
<https://www.rfc-editor.org/info/rfc1034>.
[RFC1035] Mockapetris, P., "Domain names - implementation and
specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
November 1987, <https://www.rfc-editor.org/info/rfc1035>.
[RFC6973] Cooper, A., Tschofenig, H., Aboba, B., Peterson, J.,
Morris, J., Hansen, M., and R. Smith, "Privacy
Considerations for Internet Protocols", RFC 6973,
DOI 10.17487/RFC6973, July 2013, <https://www.rfc-
editor.org/info/rfc6973>.
10.2. Informative References
[DNS-Res-Improve]
Vixie, P., Joffe, R., and F. Neves, "Improvements to DNS
Resolvers for Resiliency, Robustness, and Responsiveness",
Work in Progress, draft-vixie-dnsext-resimprove-00, June
2010.
[HAMMER] Kumari, W., Arends, R., Woolf, S., and D. Migault, "Highly
Automated Method for Maintaining Expiring Records", Work
in Progress, draft-wkumari-dnsop-hammer-01, July 2014.
[Huque-QNAME-Min]
Huque, S., "Query name minimization and authoritative
server behavior", May 2015, <https://indico.dns-
oarc.net/event/21/contribution/9>.
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 9]
Internet-Draft QNAME Minimisation July 2018
[Huque-QNAME-storify]
Huque, S., "Qname Minimization @ DNS-OARC", May 2015,
<https://storify.com/shuque/qname-minimization-dns-oarc>.
[I-D.bortzmeyer-dprive-rfc7626-bis]
Bortzmeyer, S. and S. Dickinson, "DNS Privacy
Considerations", draft-bortzmeyer-dprive-rfc7626-bis-01
(work in progress), July 2018.
[I-D.ietf-dnsop-terminology-bis]
Hoffman, P., Sullivan, A., and K. Fujiwara, "DNS
Terminology", draft-ietf-dnsop-terminology-bis-11 (work in
progress), July 2018.
[RFC2181] Elz, R. and R. Bush, "Clarifications to the DNS
Specification", RFC 2181, DOI 10.17487/RFC2181, July 1997,
<https://www.rfc-editor.org/info/rfc2181>.
[RFC7816] Bortzmeyer, S., "DNS Query Name Minimisation to Improve
Privacy", RFC 7816, DOI 10.17487/RFC7816, March 2016,
<https://www.rfc-editor.org/info/rfc7816>.
[RFC7942] Sheffer, Y. and A. Farrel, "Improving Awareness of Running
Code: The Implementation Status Section", BCP 205,
RFC 7942, DOI 10.17487/RFC7942, July 2016,
<https://www.rfc-editor.org/info/rfc7942>.
[RFC8020] Bortzmeyer, S. and S. Huque, "NXDOMAIN: There Really Is
Nothing Underneath", RFC 8020, DOI 10.17487/RFC8020,
November 2016, <https://www.rfc-editor.org/info/rfc8020>.
10.3. URIs
[1] https://framagit.org/bortzmeyer/rfc7816-bis
Appendix A. An Algorithm to Perform QNAME Minimisation
This algorithm performs name resolution with QNAME minimisation in
the presence of zone cuts that are not yet known.
Although a validating resolver already has the logic to find the
zone cuts, implementers of other resolvers may want to use this
algorithm to locate the cuts. This is just a possible aid for
implementers; it is not intended to be normative:
(0) If the query can be answered from the cache, do so; otherwise,
iterate as follows:
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 10]
Internet-Draft QNAME Minimisation July 2018
(1) Find the closest enclosing NS RRset in your cache. The owner of
this NS RRset will be a suffix of the QNAME -- the longest suffix
of any NS RRset in the cache. Call this ANCESTOR.
(2) Initialise CHILD to the same as ANCESTOR.
(3) If CHILD is the same as the QNAME, resolve the original query
using ANCESTOR's name servers, and finish.
(4) Otherwise, add a label from the QNAME to the start of CHILD.
(5) If you have a negative cache entry for the NS RRset at CHILD, go
back to step 3.
(6) Query for CHILD IN NS using ANCESTOR's name servers. The
response can be:
(6a) A referral. Cache the NS RRset from the authority section,
and go back to step 1.
(6b) An authoritative answer. Cache the NS RRset from the
answer section, and go back to step 1.
(6c) An NXDOMAIN answer. Return an NXDOMAIN answer in response
to the original query, and stop.
(6d) A NOERROR/NODATA answer. Cache this negative answer, and
go back to step 3.
Appendix B. Alternatives
Remember that QNAME minimisation is unilateral, so a resolver is not
forced to implement it exactly as described here.
There are several ways to perform QNAME minimisation. See Section 2
for the suggested way. It can be called the aggressive algorithm,
since the resolver only sends NS queries as long as it does not know
the zone cuts. This is the safest, from a privacy point of view.
Another possible algorithm, not fully studied at this time, could be
to "piggyback" on the traditional resolution code. At startup, it
sends traditional full QNAMEs and learns the zone cuts from the
referrals received, then switches to NS queries asking only for the
minimum domain name. This leaks more data but could require fewer
changes in the existing resolver codebase.
In the above specification, the original QTYPE is replaced by NS (or
may be A, if too many servers react incorrectly to NS requests); this
is the best approach to preserve privacy. But this erases
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 11]
Internet-Draft QNAME Minimisation July 2018
information about the relative use of the various QTYPEs, which may
be interesting for researchers (for instance, if they try to follow
IPv6 deployment by counting the percentage of AAAA vs. A queries). A
variant of QNAME minimisation would be to keep the original QTYPE.
Another useful optimisation may be, in the spirit of the HAMMER idea
[HAMMER], to probe in advance for the introduction of zone cuts where
none previously existed (i.e., confirm their continued absence, or
discover them).
To address the "number of queries" issue described in Section 6, a
possible solution is to always use the traditional algorithm when the
cache is cold and then to move to QNAME minimisation (precisely
defining what is "hot" or "cold" is left to the implementer). This
will decrease the privacy but will guarantee no degradation of
performance.
Acknowledgments
TODO (refer to 7816)
Changes from RFC 7816
Fixed errata #4644
Moved to standards track
Authors' Addresses
Stephane Bortzmeyer
AFNIC
1, rue Stephenson
Montigny-le-Bretonneux 78180
France
Phone: +33 1 39 30 83 46
Email: bortzmeyer+ietf@nic.fr
URI: https://www.afnic.fr/
Paul Hoffman
ICANN
Email: paul.hoffman@icann.org
Bortzmeyer & Hoffman Expires January 18, 2019 [Page 12]
