Internet DRAFT - draft-dhody-pce-applicability-actn
draft-dhody-pce-applicability-actn
PCE Working Group D. Dhody
Internet-Draft Y. Lee
Intended status: Informational Huawei Technologies
Expires: September 14, 2017 D. Ceccarelli
Ericsson
March 13, 2017
Applicability of Path Computation Element (PCE) for Abstraction and
Control of TE Networks (ACTN)
draft-dhody-pce-applicability-actn-02
Abstract
Abstraction and Control of TE Networks (ACTN) refers to the set of
virtual network operations needed to orchestrate, control and manage
large-scale multi-domain TE networks so as to facilitate network
programmability, automation, efficient resource sharing, and end-to-
end virtual service aware connectivity and network function
virtualization services.
The Path Computation Element Communication Protocol (PCEP) provides
mechanisms for Path Computation Elements (PCEs) to perform path
computations in response to Path Computation Clients (PCCs) requests.
This document examines the applicability of PCE to the ACTN
framework.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on September 14, 2017.
Dhody, et al. Expires September 14, 2017 [Page 1]
Internet-Draft PCE-ACTN March 2017
Copyright Notice
Copyright (c) 2017 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Path Computation Element (PCE) . . . . . . . . . . . . . 2
1.1.1. Role of PCE in SDN . . . . . . . . . . . . . . . . . 3
1.1.2. PCE in multi-domain and multi-layer deployments . . . 4
1.2. Abstraction and Control of TE Networks (ACTN) . . . . . . 4
1.3. PCE and ACTN . . . . . . . . . . . . . . . . . . . . . . 5
2. Architectural Considerations . . . . . . . . . . . . . . . . 6
2.1. Multi domain coordination via Hierarchy . . . . . . . . . 6
2.2. Virtualization/Abstraction function . . . . . . . . . . . 7
2.3. Customer mapping function . . . . . . . . . . . . . . . . 8
2.4. Virtual Network Operations . . . . . . . . . . . . . . . 8
3. Interface Considerations . . . . . . . . . . . . . . . . . . 9
4. Realizining ACTN with PCE (and PCEP) . . . . . . . . . . . . 9
5. Relationship to PCE based central control . . . . . . . . . . 12
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13
7. Security Considerations . . . . . . . . . . . . . . . . . . . 13
8. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 13
9. References . . . . . . . . . . . . . . . . . . . . . . . . . 13
9.1. Normative References . . . . . . . . . . . . . . . . . . 13
9.2. Informative References . . . . . . . . . . . . . . . . . 13
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 17
1. Introduction
1.1. Path Computation Element (PCE)
The Path Computation Element communication Protocol (PCEP) [RFC5440]
provides mechanisms for Path Computation Elements (PCEs) [RFC4655] to
perform path computations in response to Path Computation Clients
(PCCs) requests.
Dhody, et al. Expires September 14, 2017 [Page 2]
Internet-Draft PCE-ACTN March 2017
The ability to compute shortest constrained TE LSPs in Multiprotocol
Label Switching (MPLS) and Generalized MPLS (GMPLS) networks across
multiple domains has been identified as a key motivation for PCE
development.
A stateful PCE is capable of considering, for the purposes of path
computation, not only the network state in terms of links and nodes
(referred to as the Traffic Engineering Database or TED) but also the
status of active services (previously computed paths, and currently
reserved resources, stored in the Label Switched Paths Database
(LSPDB).
[RFC8051] describes general considerations for a stateful PCE
deployment and examines its applicability and benefits, as well as
its challenges and limitations through a number of use cases.
[I-D.ietf-pce-stateful-pce] describes a set of extensions to PCEP to
provide stateful control. A stateful PCE has access to not only the
information carried by the network's Interior Gateway Protocol (IGP),
but also the set of active paths and their reserved resources for its
computations. The additional state allows the PCE to compute
constrained paths while considering individual LSPs and their
interactions. [I-D.ietf-pce-pce-initiated-lsp] describes the setup,
maintenance and teardown of PCE-initiated LSPs under the stateful PCE
model.
[I-D.ietf-pce-stateful-pce] also describes the active stateful PCE.
The active PCE functionality allows a PCE to reroute an existing LSP
or make changes to the attributes of an existing LSP, or a PCC to
delegate control of specific LSPs to a new PCE.
1.1.1. Role of PCE in SDN
Software-Defined Networking (SDN) refers to a separation between the
control elements and the forwarding components so that software
running in a centralized system called a controller, can act to
program the devices in the network to behave in specific ways. A
required element in an SDN architecture is a component that plans how
the network resources will be used and how the devices will be
programmed. It is possible to view this component as performing
specific computations to place flows within the network given
knowledge of the availability of network resources, how other
forwarding devices are programmed, and the way that other flows are
routed. It is concluded in [RFC7399], that this is the same function
that a PCE might offer in a network operated using a dynamic control
plane. This is the function and purpose of a PCE, and the way that a
PCE integrates into a wider network control system including SDN is
presented in Application-Based Network Operation (ABNO) [RFC7491].
Dhody, et al. Expires September 14, 2017 [Page 3]
Internet-Draft PCE-ACTN March 2017
1.1.2. PCE in multi-domain and multi-layer deployments
Computing paths across large multi-domain environments require
special computational components and cooperation between entities in
different domains capable of complex path computation. The PCE
provides an architecture and a set of functional components to
address this problem space. A PCE may be used to compute end-to-end
paths across multi-domain environments using a per-domain path
computation technique [RFC5152]. The Backward recursive PCE based
path computation (BRPC) mechanism [RFC5441] defines a PCE-based path
computation procedure to compute inter-domain constrained MPLS and
GMPLS TE networks. However, both per-domain and BRPC techniques
assume that the sequence of domains to be crossed from source to
destination is known, either fixed by the network operator or
obtained by other means.
[RFC6805] describes a Hierarchical PCE (H-PCE) architecture which can
be used for computing end-to-end paths for inter-domain MPLS Traffic
Engineering (TE) and GMPLS Label Switched Paths (LSPs) when the
domain sequence is not known. Within the Hierarchical PCE (H-PCE)
architecture, the Parent PCE (P-PCE) is used to compute a multi-
domain path based on the domain connectivity information. A Child
PCE (C-PCE) may be responsible for a single domain or multiple
domains, it is used to compute the intra-domain path based on its
domain topology information.
[I-D.dhodylee-pce-stateful-hpce] state the considerations for
stateful PCE(s) in hierarchical PCE architecture. In particular, the
behavior changes and additions to the existing stateful PCE
mechanisms (including PCE- initiated LSP setup and active PCE usage)
in the context of networks using the H-PCE architecture.
[RFC5623] describes a framework for applying the PCE-based
architecture to inter-layer to (G)MPLS TE. It provides suggestions
for the deployment of PCE in support of multi-layer networks. It
also describes the relationship between PCE and a functional
component in charge of the control and management of the VNT, called
the Virtual Network Topology Manager (VNTM).
1.2. Abstraction and Control of TE Networks (ACTN)
[I-D.ietf-teas-actn-requirements] describes the high-level ACTN
requirements. [I-D.ietf-teas-actn-framework] describes the
architecture model for ACTN including the entities (Customer Network
Controller(CNC), Mult-domain Service Coordinator(MDSC), and Physical
Network Controller(PNC)) and their interfaces.
Dhody, et al. Expires September 14, 2017 [Page 4]
Internet-Draft PCE-ACTN March 2017
The ACTN reference architecture identified a three-tier control
hierarchy as depicted in Figure 1:
+-------+ +-------+ +-------+
| CNC-A | | CNC-B | | CNC-C |
+-------+ +-------+ +-------+
\ | /
---------- |-CMI I/F -----------
\ | /
+-----------------------+
| MDSC |
+-----------------------+
/ | \
---------- |-MMI I/F -----------
/ | \
+----------+ +----------+ +--------+
| MDSC | | MDSC | | MDSC |
+----------+ +----------+ +--------+
| / |-MPI I/F / \
| / | / \
+-----+ +-----+ +-----+ +-----+ +-----+
| PNC | | PNC | | PNC | | PNC | | PNC |
+-----+ +-----+ +-----+ +-----+ +-----+
CMI - (CNC-MDSC Interface)
MMI - (MDSC-MDSC Interface)
MPI - (MDSC-PNC Interface)
Figure 1: ACTN Hierarchy
The two interfaces with respect to the MDSC, one north of the MDSC
Interface) and MPI (MDSC-PNC Interface), respectively. MMI (MDSC-
MDSC interface) is used to support recursion.
[I-D.ietf-teas-actn-info-model] provides an information model for
ACTN interfaces.
1.3. PCE and ACTN
This document examines the PCE and ACTN architecture and describes
how the PCE architecture is applicable to ACTN. It also lists the
PCEP extensions that are needed to use PCEP as an ACTN interface.
This document also identifies any gaps in PCEP, that exist at the
time of publication of this document.
Dhody, et al. Expires September 14, 2017 [Page 5]
Internet-Draft PCE-ACTN March 2017
2. Architectural Considerations
ACTN [I-D.ietf-teas-actn-framework] architecture is based on
hierarchy and recursiveness of controllers. It defines three types
of controllers (depending on the functionalities they implement).
The main functionalities are -
o Multi domain coordination function
o Virtualization/Abstraction function
o Customer mapping/translation function
o Virtual service coordination function
Section 3 of [I-D.ietf-teas-actn-framework] describes these
functions.
It should be noted that, in this document we list all possible ways
in which PCEP could be used for each of the above functions, but all
functions are not required to be implemented via PCEP. Operator may
choose to use the PCEP for multi domain coordination via stateful
H-PCE but use RestConf or BGP-LS to get the topology and support
virtualization/abstraction function.
2.1. Multi domain coordination via Hierarchy
With the definition of domain being "everything that is under the
control of the single logical controller", as per
[I-D.ietf-teas-actn-framework], it is needed to have a control entity
that oversees the specific aspects of the different domains and to
build a single abstracted end-to-end network topology in order to
coordinate end-to-end path computation and path/service provisioning.
The MDSC in ACTN framework realizes this function by coordinating the
per-domain PNCs in a hierarchy of controllers. It also needs to
detach from the underlying network technology and express customer
concerns by business needs.
[RFC6805] and [I-D.dhodylee-pce-stateful-hpce] describes a hierarchy
of PCE with Parent PCE coordinating multi-domain path computation
function between Child PCE(s). It is easy to see how these
principles align, and thus how stateful H-PCE architecture can be
used to realize ACTN.
The Per domain stitched LSP in the Hierarchical stateful PCE
architecture, described in Section 3.3.1 of
[I-D.dhodylee-pce-stateful-hpce] is well suited for multi-domain
Dhody, et al. Expires September 14, 2017 [Page 6]
Internet-Draft PCE-ACTN March 2017
coordination function. This includes domain sequence selection; E2E
path computation; Controller (PCE) initiated path setup and
reporting. This is also applicable to multi-layer coordination in
case of IP+optical networks.
[I-D.litkowski-pce-state-sync]" describes the procedures to allow a
stateful communication between PCEs for various use-cases. The
procedures and extensions are also applicable to Child and Parent PCE
communication and thus useful for ACTN as well.
2.2. Virtualization/Abstraction function
To realize ACTN, an abstracted view of the underlying network
resources needs to be built. This includes global network-wide
abstracted topology based on the underlying network resources of each
domain. This also include abstract topology created as per the
customer service connectivity requests and represented as a network
slice allocated to each customer.
In order to compute and provide optimal paths, PCEs require an
accurate and timely Traffic Engineering Database (TED).
Traditionally this TED has been obtained from a link state (LS)
routing protocol supporting traffic engineering extensions. PCE may
construct its TED by participating in the IGP ([RFC3630] and
[RFC5305] for MPLS-TE; [RFC4203] and [RFC5307] for GMPLS). An
alternative is offered by BGP-LS [RFC7752].
In case of H-PCE [RFC6805], the parent PCE needs to build the domain
topology map of the child domains and their interconnectivity.
[RFC6805] and [I-D.ietf-pce-inter-area-as-applicability] suggest that
BGP-LS could be used as a "northbound" TE advertisement from the
child PCE to the parent PCE.
[I-D.dhodylee-pce-pcep-ls] proposes another approaches for learning
and maintaining the Link-State and TE information as an alternative
to IGPs and BGP flooding, using PCEP itself. The child PCE can use
this mechanism to transport Link-State and TE information from child
PCE to a Parent PCE using PCEP.
In ACTN, there is a need to control the level of abstraction based on
the deployment scenario and business relationship between the
controllers. The mechanism used to disseminate information from PNC
(child PCE) to MDSC (parent PCE) should support abstraction.
[I-D.lee-teas-actn-abstraction] describes a few alternative
approaches of abstraction. The resulting abstracted topology can be
encoded using the PCEP-LS mechanisms [I-D.dhodylee-pce-pcep-ls].
PCEP-LS is an attractive option when the operator would wish to have
a single control plane protocol (PCEP) to achieve ACTN functions.
Dhody, et al. Expires September 14, 2017 [Page 7]
Internet-Draft PCE-ACTN March 2017
2.3. Customer mapping function
In ACTN, there is a need to map customer virtual network (VN)
requirements into network provisioning request to the PNC. That is,
the customer requests/commands are mapped into network provisioning
requests that can be sent to the PNC. Specifically, it provides
mapping and translation of a customer's service request into a set of
parameters that are specific to a network type and technology such
that network configuration process is made possible.
[I-D.ietf-pce-pce-initiated-lsp] describes the setup, maintenance and
teardown of PCE-initiated LSPs under the stateful PCE model, without
the need for local configuration on the PCC, thus allowing for a
dynamic network that is centrally controlled and deployed. To
instantiate or delete an LSP, the PCE sends the Path Computation LSP
Initiate Request (PCInitiate) message to the PCC. As described in
[I-D.dhodylee-pce-stateful-hpce], for inter-domain LSP in
Hierarchical PCE architecture, the initiation operations can be
carried out at the parent PCE. In which case after parent PCE
finishes the E2E path computation, it can send the PCInitiate message
to the child PCE, the child PCE further propagates the initiate
request to the LSR. The customer request is received by the MDSC
(parent PCE) and based on the business logic, global abstracted
topology, network conditions and local policy, the MDSC (parent PCE)
translates this into per domain LSP initiation request that a PNC
(child PCE) can understand and act on. This can be done via the
PCInitiate message.
PCEP extensions for associating opaque policy between PCEP peer
[I-D.ietf-pce-association-policy] can be used.
2.4. Virtual Network Operations
Virtual service coordination function in ACTN incorporates customer
service-related information into the virtual network service
operations in order to seamlessly operate virtual networks while
meeting customer's service requirements.
[I-D.leedhody-pce-vn-association] describes the need for associating
a set of LSPs with a VN "construct" to facilitate VN operations in
PCE architecture. This association allows the PCEs to identify which
LSPs belong to a certain VN.
This association based on VN is useful for various optimizations at
the VN level which can be applied to all the LSPs that are part of
the VN slice. During path computation, the impact of a path for an
LSP is compared against the paths of other LSPs in the VN. This is
to make sure that the overall optimization and SLA of the VN rather
Dhody, et al. Expires September 14, 2017 [Page 8]
Internet-Draft PCE-ACTN March 2017
than of a single LSP. Similarly, during re-optimization, advanced
path computation algorithm and optimization technique can be
considered for all the LSPs belonging to a VN/customer and optimize
them all together.
3. Interface Considerations
As per [I-D.ietf-teas-actn-framework], to allow virtualization and
multi domain coordination, the network has to provide open,
programmable interfaces, in which customer applications can create,
replace and modify virtual network resources and services in an
interactive, flexible and dynamic fashion while having no impact on
other customers. The 3 ACTN interfaces are -
o The CNC-MDSC Interface (CMI) is an interface between a Customer
Network Controller and a Multi Domain Service Coordinator. It
requests the creation of the network resources, topology or
services for the applications. The MDSC may also report potential
network topology availability if queried for current capability
from the Customer Network Controller.
o The MDSC-PNC Interface (MPI) is an interface between a Multi
Domain Service Coordinator and a Physical Network Controller. It
communicates the creation request, if required, of new
connectivity of bandwidth changes in the physical network, via the
PNC. In multi-domain environments, the MDSC needs to establish
multiple MPIs, one for each PNC, as there are multiple PNCs
responsible for its domain control.
o The MDSC-MDSC Interface (MMI) is a special case of the MPI and
behaves similarly to an MPI to support general functions performed
by the MDSCs such as abstraction function and provisioning
function. From an abstraction point of view, the top level MDSC
which interfaces the CNC operates on a higher level of abstraction
(i.e., less granular level) than the lower level MSDCs. As such,
the MMI carries more abstract TE information than the MPI.
PCEP is especially suitable on the MPI and MMI as it meets the
requirement and the functions as set out in the ACTN framework
[I-D.ietf-teas-actn-framework]. Its recursive nature is well suited
via the multi-level hierarchy of PCE. The Section 4 describe how PCE
and PCEP could help realize ACTN.
4. Realizining ACTN with PCE (and PCEP)
As per the example in the Figure 2, there are 4 domains, each with
its own PNC and a MDSC at top. The PNC and MDSC need PCE as a
important function. The PNC (or child PCE) already uses PCEP to
Dhody, et al. Expires September 14, 2017 [Page 9]
Internet-Draft PCE-ACTN March 2017
communicate to the network device. It can utilize the PCEP as the
MPI to communicate between controllers too.
******
..........*MDSC*..............................
. ****** .. MPI .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
v v v .
****** ****** ****** .
*PNC1* *PNC2* *PNC4* .
****** ****** ****** .
+---------------+ +---------------+ +---------------+ .
|A |----| |----| C| .
| | | | | | .
|DOMAIN 1 |----|DOMAIN 2 |----|DOMAIN 4 | .
+------------B13+ +---------------+ +B43------------+ .
\ / .
\ ****** / .
\ *PNC3*<............/.....................
\ ****** /
\+---------------+/
B31 B34
| |
|DOMAIN 3 B|
+---------------+
MDSC -> Parent PCE
PNC -> Child PCE
MPI -> PCEP
Figure 2: ACTN with PCE
o Building Domain Topology at MDSC: PNC (or child PCE) needs to have
the TED to compute path in its domain. As described in
Section 2.2, it can learn the topology via IGP or BGP-LS. PCEP-LS
is also a proposed mechanism to carry link state and traffic
engineering information within PCEP. A mechanism to carry
abstracted topology while hiding technology specific information
between PNC and MDSC is described in [I-D.dhodylee-pce-pcep-ls].
At the end of this step the MDSC (or parent PCE) has the
abstracted topology from each of its PNC (or child PCE). This
could be as simple as a domain topology map as described in
Dhody, et al. Expires September 14, 2017 [Page 10]
Internet-Draft PCE-ACTN March 2017
[RFC6805] or it can have full topology information of all domains.
The latter is not scalable and thus an abstracted topology of each
domain interconnected by inter-domain links is the most common
case.
* Topology Change: When the PNC learns of any topology change,
the PNC needs to decide if the change needs to be notified to
the MDSC. This is dependent on the level of abstraction
between the MDSC and the PNC.
o VN Instantiate: MDSC is requested to instantiate a VN, the minimal
information that is required would be a VN identifier and a set of
end points. Various path computation, setup constraints and
objective functions may also be provided. In PCE terms, a VN
Instantiate can be considered as a set of paths belonging to the
same VN. As described in Section 2.4 and
[I-D.leedhody-pce-vn-association] the VN association can help in
identifying the set of paths that belong to a VN. The rest of the
information like the endpoints, constraints and objective function
is already defined in PCEP in terms of a single path.
* Path Computation: As per the example in the Figure 2, the VN
instantiate requires two end to end paths between (A in Domain
1 to B in Domain 3) and (A in Domain 1 to C in Domain 4). The
MDSC (or parent PCE) triggers the end to end path computation
for these two paths. MDSC can do path computation based on the
abstracted domain topology that it already has or it may use
the H-PCE procedures (Section 2.1) using the PCReq and PCRep
messages to get the end to end path with the help of PNC.
Either way, the resulted E2E paths may be broken into per-
domain paths.
* A-B: (A-B13,B13-B31,B31-B)
* A-C: (A-B13,B13-B31,B34-B43,B43-C)
* Per Domain Path Instantiation: Based on the above path
computation, MDSC can issue the path instantiation request to
each PNC via PCInitiate message (see
[I-D.dhodylee-pce-stateful-hpce] and
[I-D.leedhody-pce-vn-association]). A suitable stitching
mechanism would be use to stitch these per domain LSPs.
* Per Domain Path Report: Each PNC should report the status of
the per-domain LSP to the MDSC via PCRpt message, as per the
Hierarchy of stateful PCE ([I-D.dhodylee-pce-stateful-hpce]).
The status of the end to end LSP (A-B and A-C) is made up when
all the per domain LSP are reported up by the PNCs.
Dhody, et al. Expires September 14, 2017 [Page 11]
Internet-Draft PCE-ACTN March 2017
* Delegation: It is suggested that the per domain LSPs are
delegated to respective PNC, so that they can control the path
and attributes based on each domain network conditions.
* State Synchronization: The state needs to be synchronized
between the parent PCE and child PCE. The mechanism described
in [I-D.litkowski-pce-state-sync] can be used.
o VN Modify: MDSC is requested to modify a VN, for example the
bandwidth for VN is increased. This may trigger path computation
at MDSC as described in the previous step and can trigger an
update to existing per-intra-domain path (via PCUpd message) or
creation (or deletion) of a per-domain path (via PCInitiate
message). This should be done in make-before-break fashion.
o VN Delete: MDSC is requested to delete a VN, in this case, based
on the E2E paths and the resulting per-domain paths need to be
removed (via PCInitiate message).
o VN Update (based on network changes): Any change in the per-domain
LSP are reported to the MDSC (via PCRpt message) as per
[I-D.dhodylee-pce-stateful-hpce]. This may result in changes in
the E2E path or VN status. This may also trigger a re-
optimization leading to a new per-domain path, update to existing
path, or deletion of the path.
o VN Protection: The VN protection/restoration requirements, need to
applied to each E2E path as well as each per domain path. The
MDSC needs to play a crucial role in coordinating the right
protection/restoration policy across each PNC. The existing
protection/restoration mechanism of PCEP can be applied on each
path.
o In case PNC generates an abstract topology to the MDSC, the
PCInitiate/PCUpd messages from the MDSC to a PNC will contain a
path with abstract nodes and links. PNC would need to take that
as an input for path computation to get a path with physical nodes
and links. Similarly PNC would convert the path received from the
device (with physical nodes and links) into abstract path (based
on the abstract topology generated before with abstract nodes and
links) and reported to the MDSC.
5. Relationship to PCE based central control
[I-D.ietf-teas-pce-central-control] introduces the architecture for
PCE as a central controller (PCECC), it further examines the
motivations and applicability for PCEP as a southbound interface, and
introduces the implications for the protocol. The section 2.1.3 of
Dhody, et al. Expires September 14, 2017 [Page 12]
Internet-Draft PCE-ACTN March 2017
[I-D.ietf-teas-pce-central-control] describe an hierarchy of PCE-
based controller as per the Hierarchy of PCE framework defined in
[RFC6805]. Both ACTN and PCECC is based on the same basic framework
and thus compatible with each other.
6. IANA Considerations
This is an informational document and thus does not have any IANA
allocations to be made.
7. Security Considerations
The ACTN framework described in [I-D.ietf-teas-actn-framework]
defines key components and interfaces for managed traffic engineered
networks. It also list various security considerations such as
request and control of resources, confidentially of the information,
and availability of function which should be taken into
consideration.
When PCEP is used on the MPI/MMI, this interface needs to be secured,
use of [I-D.ietf-pce-pceps] is RECOMENDED. Each PCEP extension
listed in this document, presents its individual security
considerations, which continue to apply.
8. Acknowledgments
The authors would like to thank Jonathan Hardwick for the inspiration
behind this document. Further thanks to Avantika for her comments
with suggested text.
9. References
9.1. Normative References
[RFC5440] Vasseur, JP., Ed. and JL. Le Roux, Ed., "Path Computation
Element (PCE) Communication Protocol (PCEP)", RFC 5440,
DOI 10.17487/RFC5440, March 2009,
<http://www.rfc-editor.org/info/rfc5440>.
9.2. Informative References
[RFC3630] Katz, D., Kompella, K., and D. Yeung, "Traffic Engineering
(TE) Extensions to OSPF Version 2", RFC 3630,
DOI 10.17487/RFC3630, September 2003,
<http://www.rfc-editor.org/info/rfc3630>.
Dhody, et al. Expires September 14, 2017 [Page 13]
Internet-Draft PCE-ACTN March 2017
[RFC4203] Kompella, K., Ed. and Y. Rekhter, Ed., "OSPF Extensions in
Support of Generalized Multi-Protocol Label Switching
(GMPLS)", RFC 4203, DOI 10.17487/RFC4203, October 2005,
<http://www.rfc-editor.org/info/rfc4203>.
[RFC4655] Farrel, A., Vasseur, J., and J. Ash, "A Path Computation
Element (PCE)-Based Architecture", RFC 4655,
DOI 10.17487/RFC4655, August 2006,
<http://www.rfc-editor.org/info/rfc4655>.
[RFC5152] Vasseur, JP., Ed., Ayyangar, A., Ed., and R. Zhang, "A
Per-Domain Path Computation Method for Establishing Inter-
Domain Traffic Engineering (TE) Label Switched Paths
(LSPs)", RFC 5152, DOI 10.17487/RFC5152, February 2008,
<http://www.rfc-editor.org/info/rfc5152>.
[RFC5305] Li, T. and H. Smit, "IS-IS Extensions for Traffic
Engineering", RFC 5305, DOI 10.17487/RFC5305, October
2008, <http://www.rfc-editor.org/info/rfc5305>.
[RFC5307] Kompella, K., Ed. and Y. Rekhter, Ed., "IS-IS Extensions
in Support of Generalized Multi-Protocol Label Switching
(GMPLS)", RFC 5307, DOI 10.17487/RFC5307, October 2008,
<http://www.rfc-editor.org/info/rfc5307>.
[RFC5441] Vasseur, JP., Ed., Zhang, R., Bitar, N., and JL. Le Roux,
"A Backward-Recursive PCE-Based Computation (BRPC)
Procedure to Compute Shortest Constrained Inter-Domain
Traffic Engineering Label Switched Paths", RFC 5441,
DOI 10.17487/RFC5441, April 2009,
<http://www.rfc-editor.org/info/rfc5441>.
[RFC5623] Oki, E., Takeda, T., Le Roux, JL., and A. Farrel,
"Framework for PCE-Based Inter-Layer MPLS and GMPLS
Traffic Engineering", RFC 5623, DOI 10.17487/RFC5623,
September 2009, <http://www.rfc-editor.org/info/rfc5623>.
[RFC6805] King, D., Ed. and A. Farrel, Ed., "The Application of the
Path Computation Element Architecture to the Determination
of a Sequence of Domains in MPLS and GMPLS", RFC 6805,
DOI 10.17487/RFC6805, November 2012,
<http://www.rfc-editor.org/info/rfc6805>.
[RFC7399] Farrel, A. and D. King, "Unanswered Questions in the Path
Computation Element Architecture", RFC 7399,
DOI 10.17487/RFC7399, October 2014,
<http://www.rfc-editor.org/info/rfc7399>.
Dhody, et al. Expires September 14, 2017 [Page 14]
Internet-Draft PCE-ACTN March 2017
[RFC7491] King, D. and A. Farrel, "A PCE-Based Architecture for
Application-Based Network Operations", RFC 7491,
DOI 10.17487/RFC7491, March 2015,
<http://www.rfc-editor.org/info/rfc7491>.
[RFC7752] Gredler, H., Ed., Medved, J., Previdi, S., Farrel, A., and
S. Ray, "North-Bound Distribution of Link-State and
Traffic Engineering (TE) Information Using BGP", RFC 7752,
DOI 10.17487/RFC7752, March 2016,
<http://www.rfc-editor.org/info/rfc7752>.
[RFC8051] Zhang, X., Ed. and I. Minei, Ed., "Applicability of a
Stateful Path Computation Element (PCE)", RFC 8051,
DOI 10.17487/RFC8051, January 2017,
<http://www.rfc-editor.org/info/rfc8051>.
[I-D.ietf-pce-stateful-pce]
Crabbe, E., Minei, I., Medved, J., and R. Varga, "PCEP
Extensions for Stateful PCE", draft-ietf-pce-stateful-
pce-18 (work in progress), December 2016.
[I-D.ietf-pce-pce-initiated-lsp]
Crabbe, E., Minei, I., Sivabalan, S., and R. Varga, "PCEP
Extensions for PCE-initiated LSP Setup in a Stateful PCE
Model", draft-ietf-pce-pce-initiated-lsp-09 (work in
progress), March 2017.
[I-D.dhodylee-pce-stateful-hpce]
Dhody, D., Lee, Y., Ceccarelli, D., Shin, J., King, D.,
and O. Dios, "Hierarchical Stateful Path Computation
Element (PCE).", draft-dhodylee-pce-stateful-hpce-03 (work
in progress), March 2017.
[I-D.ietf-teas-pce-central-control]
Farrel, A., Zhao, Q., Li, Z., and C. Zhou, "An
Architecture for Use of PCE and PCEP in a Network with
Central Control", draft-ietf-teas-pce-central-control-01
(work in progress), December 2016.
[I-D.ietf-teas-actn-requirements]
Lee, Y., Dhody, D., Belotti, S., Pithewan, K., and D.
Ceccarelli, "Requirements for Abstraction and Control of
TE Networks", draft-ietf-teas-actn-requirements-04 (work
in progress), January 2017.
Dhody, et al. Expires September 14, 2017 [Page 15]
Internet-Draft PCE-ACTN March 2017
[I-D.ietf-teas-actn-framework]
Ceccarelli, D. and Y. Lee, "Framework for Abstraction and
Control of Traffic Engineered Networks", draft-ietf-teas-
actn-framework-04 (work in progress), February 2017.
[I-D.ietf-teas-actn-info-model]
Lee, Y., Belotti, S., Dhody, D., Ceccarelli, D., and B.
Yoon, "Information Model for Abstraction and Control of TE
Networks (ACTN)", draft-ietf-teas-actn-info-model-00 (work
in progress), February 2017.
[I-D.ietf-pce-inter-area-as-applicability]
King, D., Meuric, J., Dugeon, O., Zhao, Q., Dhody, D., and
O. Dios, "Applicability of the Path Computation Element to
Inter-Area and Inter-AS MPLS and GMPLS Traffic
Engineering", draft-ietf-pce-inter-area-as-
applicability-06 (work in progress), July 2016.
[I-D.dhodylee-pce-pcep-ls]
Dhody, D., Lee, Y., and D. Ceccarelli, "PCEP Extension for
Distribution of Link-State and TE Information.", draft-
dhodylee-pce-pcep-ls-07 (work in progress), March 2017.
[I-D.leedhody-pce-vn-association]
Lee, Y., Dhody, D., Zhang, X., and D. Ceccarelli, "PCEP
Extensions for Establishing Relationships Between Sets of
LSPs and Virtual Networks", draft-leedhody-pce-vn-
association-02 (work in progress), March 2017.
[I-D.litkowski-pce-state-sync]
Litkowski, S., Sivabalan, S., and D. Dhody, "Inter
Stateful Path Computation Element communication
procedures", draft-litkowski-pce-state-sync-01 (work in
progress), February 2017.
[I-D.ietf-pce-association-policy]
Dhody, D., Sivabalan, S., Litkowski, S., Tantsura, J., and
J. Hardwick, "Path Computation Element communication
Protocol extension for associating Policies and LSPs",
draft-ietf-pce-association-policy-00 (work in progress),
December 2016.
[I-D.ietf-pce-pceps]
Lopez, D., Dios, O., Wu, W., and D. Dhody, "Secure
Transport for PCEP", draft-ietf-pce-pceps-11 (work in
progress), January 2017.
Dhody, et al. Expires September 14, 2017 [Page 16]
Internet-Draft PCE-ACTN March 2017
[I-D.lee-teas-actn-abstraction]
Lee, Y., Dhody, D., Ceccarelli, D., and O. Dios,
"Abstraction and Control of TE Networks (ACTN) Abstraction
Methods", draft-lee-teas-actn-abstraction-00 (work in
progress), October 2016.
Authors' Addresses
Dhruv Dhody
Huawei Technologies
Divyashree Techno Park, Whitefield
Bangalore, Karnataka 560066
India
EMail: dhruv.ietf@gmail.com
Young Lee
Huawei Technologies
5340 Legacy Drive, Building 3
Plano, TX 75023
USA
EMail: leeyoung@huawei.com
Daniele Ceccarelli
Ericsson
Torshamnsgatan,48
Stockholm
Sweden
EMail: daniele.ceccarelli@ericsson.com
Dhody, et al. Expires September 14, 2017 [Page 17]