Internet DRAFT - draft-hallambaker-httpsession
draft-hallambaker-httpsession
Internet Engineering Task Force P. Hallam-Baker
Internet-Draft Comodo Group Inc.
Intended status: Standards Track October 27, 2014
Expires: April 30, 2015
HTTP Session Management
draft-hallambaker-httpsession-03
Abstract
The HTTP Session Management Mechanism provides a mean of securely
establishing a persistent authentication session between a HTTP
client and server that does not rely on the presentation of a
confidential bearer token. The Session Management Mechanism is
intended to provide a replacement for the existing HTTP State
Management Mechanism (Cookies) for this purpose.
This document defines the HTTP Accept-Session, Set-Session and
Session headers and specifies their use to establish symmetric
authentication keys and their use to authenticate and verify specific
parts of an HTTP message. Other means by which keys used to
authenticate the messages are established are outside the scope of
this document.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on April 30, 2015.
Copyright Notice
Copyright (c) 2014 IETF Trust and the persons identified as the
document authors. All rights reserved.
Hallam-Baker Expires April 30, 2015 [Page 1]
Internet-Draft HTTP Session Management October 2014
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Relationship to Other Authentication Technologies . . . . 4
1.2. Example: Web Browser User Authentication . . . . . . . . 5
1.3. Use in Web Services . . . . . . . . . . . . . . . . . . . 7
2. Session Context . . . . . . . . . . . . . . . . . . . . . . . 8
2.1. Fixed Session Context . . . . . . . . . . . . . . . . . . 8
2.1.1. Id: Identifier . . . . . . . . . . . . . . . . . . . 8
2.1.2. MAC: Message Authentication Code Algorithm . . . . . 9
2.1.3. Key: Authentication Key . . . . . . . . . . . . . . . 9
2.1.4. Scope Attributes . . . . . . . . . . . . . . . . . . 9
2.1.5. Replay Attacks . . . . . . . . . . . . . . . . . . . 10
2.1.5.1. Request Replay Attack . . . . . . . . . . . . . . 10
2.1.5.2. Response Replay Attack . . . . . . . . . . . . . 11
2.1.6. Direction . . . . . . . . . . . . . . . . . . . . . . 11
2.1.7. TLS Binding (Fixed) . . . . . . . . . . . . . . . . . 11
2.1.8. Domain: String . . . . . . . . . . . . . . . . . . . 11
2.2. Session Context State Attributes . . . . . . . . . . . . 12
2.2.1. Expiry time: Max-Age . . . . . . . . . . . . . . . . 12
2.2.2. Now: Time Offset (Time) . . . . . . . . . . . . . . . 12
2.2.2.1. Now: Last Now (Time) . . . . . . . . . . . . . . 12
2.2.3. Count: Last Count (Count) . . . . . . . . . . . . . . 12
2.2.4. Nonce: Last Nonce (Nonce) . . . . . . . . . . . . . . 13
3. Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.1. Accept-Session Header . . . . . . . . . . . . . . . . . . 13
3.2. Set-Session Header . . . . . . . . . . . . . . . . . . . 14
3.3. Session Header . . . . . . . . . . . . . . . . . . . . . 15
3.3.1. Value=[Binary] (required) . . . . . . . . . . . . . . 16
3.3.2. Nonce=[Binary] . . . . . . . . . . . . . . . . . . . 16
3.3.3. Stream=[Decimal] . . . . . . . . . . . . . . . . . . 16
3.3.3.1. Count=[Decimal] . . . . . . . . . . . . . . . . . 16
3.3.3.2. Time=[NTime] . . . . . . . . . . . . . . . . . . 16
3.3.3.3. Attribute tlsu=[value] . . . . . . . . . . . . . 16
3.3.3.4. Attribute tlss=[value] . . . . . . . . . . . . . 16
3.3.4. Preparing the Input to the Authentication Algorithm . 16
4. Processing . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.1. Calculating the Authentication Value . . . . . . . . . . 17
Hallam-Baker Expires April 30, 2015 [Page 2]
Internet-Draft HTTP Session Management October 2014
4.1.1. Start line . . . . . . . . . . . . . . . . . . . . . 17
4.1.2. Canonical Headers . . . . . . . . . . . . . . . . . . 17
4.1.3. Message Content . . . . . . . . . . . . . . . . . . . 17
4.2. Generating a Session Header . . . . . . . . . . . . . . . 18
4.3. Verifying a HTTP Message under a Session Context . . . . 18
5. Security Considerations . . . . . . . . . . . . . . . . . . . 18
5.1. Data outside the specified scope is not authenticated . . 18
5.2. Truncated Hash Algorithms . . . . . . . . . . . . . . . . 18
5.3. Randomness of Secret Keys and nonces . . . . . . . . . . 18
5.4. Weak Ciphers . . . . . . . . . . . . . . . . . . . . . . 19
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 19
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 19
7.1. Normative References . . . . . . . . . . . . . . . . . . 19
7.2. Non Normative References . . . . . . . . . . . . . . . . 20
Appendix A. Session Identifier Encoding . . . . . . . . . . . . 20
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 20
1. Introduction
The HTTP State Management Mechanism 'Cookies'[RFC6265] was intended
to allow HTTP [RFC2616] servers to let servers maintain a stateful
session over the mostly stateless HTTP protocol. While the exchange
of static tokens is an acceptable mechanism for maintaining state,
use of static tokens as bearer tokens for authentication is not.
Such tokens are not bound to any part of the message they purport to
authenticate and may be disclosed to intermediaries including HTTP
proxies and caches.
While use of TLS transport provides a confidentiality enhancement for
HTTP content, recent research [CRIME], [BEAST] demonstrates that
relying on a transport or network layer to protect the
confidentiality of a bearer authentication token is fundamentaly
unsound. The interaction of HTTP header compression mechanisms and a
Turing complete active code mechanism under control of the attacker
produces a threat model in which the capabilities afforded the
attacker far exceed the capabilities that it is sensible to expect a
protocol design to resist.
The HTTP Accept-Session, Set-Session and Session headers provide a
simple and effective means of maintaining a HTTP authentication
session without passing static authentication data in either
direction after the authentication session has been established. The
design of the Set-Session and Session headers permit them to be used
as a replacement for the Set-Cookie and Cookie headers in situations
where they are supported by both the client and the server and ensure
correct behavior by intermediaries conformant to the HTTP
specification.
Hallam-Baker Expires April 30, 2015 [Page 3]
Internet-Draft HTTP Session Management October 2014
A HTTP authentication session MAY be established inband by means of
the Set-Session header. The Set-Session header specifies a unique
identifier for the session and determines the session parameters
including the cryptographic algorithm and shared key.
Applications SHOULD make use of cryptographic enhancements to protect
the confidentiality of a session context established using the Set-
Session header.
Clients and Servers MAY support other means of establishing a HTTP
authentication session. For example in a federated authentication
scheme such as SAML, Kerberos or OpenID, the authentication session
might be provided by a third party.
Once the HTTP authentication session is established, a Session header
is added to HTTP requests and/or responses as directed by the session
context. The session header specifies the session identifier and an
authentication value calculated over portions of the HTTP message and
other attributes to which it is bound as directed by the
corresponding session context. The bound attributes and portions of
the HTTP message cannot then be changed without invalidating the
authentication value.
The use of bound attributes permits protection against TLS channel
rebinding and/or HTTP message replay attacks.
The portions of a HTTP message to which it is desirable to bind an
authentication session depend on the situation. Binding the
authentication session to the message content prevents modification
of the content but imposes more constraints on implementations than
binding to the message start line. Interactions with intermediaries
and in particular intermediarries that are not fully compliant with
the HTTP specification also raise concerns Web browsers are typically
coded to be tollerant of such implementation defects and operate
despite unauthorized modification of content by caches and other
intermediaries. The prefered behavior of a Web Service client in
such situations is likely to be to abort the transaction rather than
risk continuing with corrupted data.
1.1. Relationship to Other Authentication Technologies
The term 'user authentication' is commonly used in three separate
contexts; credential management, credential presentation and session
continuation:
Credential Management describes the means by which credentials are
created, issued and revoked.
Hallam-Baker Expires April 30, 2015 [Page 4]
Internet-Draft HTTP Session Management October 2014
Credential Presentation describes the means by which a party
demonstrates holdership of a credential to establish an
authentication session.
Session Continuation describes the means by which a party
demonstrates that a particular transaction is taking place within
the context of a particular authentication session.
The HTTP Session Management Mechanism is designed to support only
Session Continuation and to compliment existing and future mechanisms
for Credential management and Credential Presentation. While a
session continuation mechanism is not in itself a solution to the
problem of user authentication, the provision of a robust session
continuation mechanism that does not depend on a bearer token
addresses the most challenging problem facing the designers of SAML,
OpenID and OAUTH.
1.2. Example: Web Browser User Authentication
The principal mechanism for user authentication in use today is to
present a HTML form in which the user enters their username and
password.
This approach has many known defects that are outside the scope of
this document. These include the risk of impersonation of the Web
site causing the user to enter their username and password into a
form controlled by the attack and the strong likelihood that the user
will use the same password across multiple sites.
The client indicates that it supports the session header by including
one or more Accept-Session headers in the request transfering the
username and password values. The Accept-Session header specifies
the scope and replay binding options that the client offers to
support.
[NB: These examples are not yet generated from running code and are
for illustrative purposes only]
POST /login.php HTTP/1.1
Host: example.com
Cache-Control: no-store
Content-Type: application/x-www-form-urlencoded
Content-Length: 29
Accept-Session: Start=required Request=required Content=optional
Time=required
username=skroob&password=1234
Hallam-Baker Expires April 30, 2015 [Page 5]
Internet-Draft HTTP Session Management October 2014
If the browser does not specify a Accept-Session header the server
MAY reject the connection request entirely or fallback to the
traditional Cookie mechanism as determined by site policy.
If the service accepts the offer of session management support, it
includes a Set-session Header in the response specifying the session
context:
HTTP/1.1 201 OK
Content-Length: 35
Set-Session:
Id=TUMnorO0SjHHS7D2uFcGlRYJ0Hd3eibwe0ogptoNMQuCYmCHfHAJcJlyvi
j8WoXDglTSOkctnmoBzl8W0NLSlcgSyZcmsAyoWs8y1Rn2ZlO2WBgoWrFIOqPa4
oB29dgs/ei6ieINZtmvXNCm2NUkWA==
Key=7eb219188339135ba51e8715f3900bfb974995e145d6e490e4addbbdb26f4bb4
Alg=HMAC-SHA256 Start=True Request=True Time=True Now=745531
Domain=example.com Max-Age=31536000
<html><h1>Authenticated</h1></html>
In this case the server avoids the need to track per client state by
using a time based mechanism to avoid replay attacks and storing the
state associated with the client session as encrypted data within the
session identifier. The scope of the content binding is limited to
the start line and the timer to be used for replay attack prevention
has an offset 745531 seconds in the past.
Once the session has been established, the client MUST include a
Session header in subsequent HTTP requests made to the specified DNS
domains.
GET /status.php HTTP/1.1
Host: example.com
Cache-Control: no-store
Content-Type: application/x-www-form-urlencoded
Content-Length: 29
Session: Id=TUMnorO0SjHHS7D2uFcGlRYJ0Hd3eibwe0ogptoNMQuCYmCHfHAJcJlyvi
j8WoXDglTSOkctnmoBzl8W0NLSlcgSyZcmsAyoWs8y1Rn2ZlO2WBgoWrFIOqPa4
oB29dgs/ei6ieINZtmvXNCm2NUkWA==
Value=cjkMkfnnYP8JYWZAbRLvtpqImmOK3rsrOT1XcvAgHDk=;
Now=745533
In this case the session scope does not specify responses and so the
response does not require an Session header but a server MAY provide
one so as to specify updated values for the replay attack prevention
attributes Now and/or Count. Whenever a Session header is present
the Id and Value attributes MUST be specified and correct:
Hallam-Baker Expires April 30, 2015 [Page 6]
Internet-Draft HTTP Session Management October 2014
HTTP/1.1 201 OK
Content-Length: 35
Session:
Id=TUMnorO0SjHHS7D2uFcGlRYJ0Hd3eibwe0ogptoNMQuCYmCHfHAJcJlyvi
j8WoXDglTSOkctnmoBzl8W0NLSlcgSyZcmsAyoWs8y1Rn2ZlO2WBgoWrFIOqPa4
oB29dgs/ei6ieINZtmvXNCm2NUkWA==
Value=cjkMkfnnYP8JYWZAbRLvtpqImmOK3rsrOT1XcvAgHDk=;
Now=745532
<html><h1>Shield is Closed</h1></html>
In this particular instance the clock at the server is running behind
that of the client requiring the timer offset value to be decreased
by one second. To ensure that the replay attack protection values
only increase or stay the same, the client uses the last value of the
old time offset until the new time offset value has superceded it.
The Web Browser MAY terminate the session by simply deleting the
session context information from its store preventing reuse. A
client MAY inform the server that the session context is about to be
deleted by including a Session header with the Deleted attribute:
HEAD /status.php HTTP/1.1
Host: example.com
Session: Id=TUMnorO0SjHHS7D2uFcGlRYJ0Hd3eibwe0ogptoNMQuCYmCHfHAJcJlyvi
j8WoXDglTSOkctnmoBzl8W0NLSlcgSyZcmsAyoWs8y1Rn2ZlO2WBgoWrFIOqPa4
oB29dgs/ei6ieINZtmvXNCm2NUkWA==
Value=cjkMkfnnYP8JYWZAbRLvtpqImmOK3rsrOT1XcvAgHDk=;
Deleted
A server may inform the client that the session has been terminated
by including a Session header with the Deleted attribute in the
response.
1.3. Use in Web Services
Use of HTTP Session Managment simplifies implemenatation of Web
Services. Using the SOAP [TBS] approach a Web Service message is
encoded in XML [TBS], wrapped in a SOAP envelope and a WS-Security
[TBS] header with an XML Signature [TBS] attached. The whole package
is then attached to a HTTP message as a content payload.
This approach involves a considerable degree of complexity and in
most cases does nothing more than attach authentication data to a
message. Carrying the authentication value as a HTTP header
typically eliminates the need for the SOAP and WS-Security layers
entirely.
Hallam-Baker Expires April 30, 2015 [Page 7]
Internet-Draft HTTP Session Management October 2014
Use of session management in Web Services presents different
requirements and constraints. In the case of an entirely new Web
Service with no deployment history, there is no need to consider
support for legacy code at all, eliminating one of the principal
constraints governing use of new HTTP protocol features in Web
Browsers.
A single HTTP message MAY have multiple Session headers. This
facilitates support for multi-party transactions in which A submits a
transaction to B who countersigns it and passes it to C who is
required to chek that she has proof of agreement by both A and B.
Use of the Session header permits the developer to isolate integrity
and authentication checks to a single point of control, as is advised
by best security practice. The security monitor examines a HTTP
message, verifies that the required integrity data is present and
correct and only passes the payload on for processing by the Web
Service itself if and only if the verification checks have been
passed.
2. Session Context
The processing of the Session header is determined by the session
context which consists of a set of fixed attributes that remain
constant for the lifetime of the session and state attributes that
are updated as Session headers are generated and verified.
2.1. Fixed Session Context
The fixed session context elements are set when the session is
established and remain constant for the lifetime of the session. The
values specified can only be changed by establishing a new session
which MUST have a different session identifier.
2.1.1. Id: Identifier
The session identifier is a statistically unique sequence of binary
data which SHOULD be unique, MUST be statistically unique, SHOULD be
less than 512 octets in length and MUST NOT be longer than 4096
octets in length.
Servers MAY avoid the need to maintain per-session server side state
by encoding the some or all of the fixed session context parameters
in to the identifier. Servers MUST ensure that appropriate
cryptographic enhancements are employed to authenticate the sessikon
context and protect the confidentiality of the authentication key.
The scheme used to construct the session identifiers used in the
examples is described in Appendix A
Hallam-Baker Expires April 30, 2015 [Page 8]
Internet-Draft HTTP Session Management October 2014
2.1.2. MAC: Message Authentication Code Algorithm
The message authentication algorithm to be used to calculate the
authentication value.
HMAC construction [RFC2104]
HMAC-SHA256-128 HMAC using the SHA-1 algorithm with the output
truncated to the first 64 bits.
HMAC-SHA512-256 HMAC using the SHA-1 algorithm with the output
truncated to the first 256 bits.
HMAC-SHA2-256-128 HMAC using the SHA-2 algorithm with the output
truncated to the first 128 bits.
HMAC-SHA2-512-256 HMAC using the SHA-2 algorithm with the output
truncated to the first 256 bits.
CMAC Construction [RFC4493]
CMAC-AES128-64 The AES algorithm employed in CMAC mode with a 128
bit key and the output truncated to the first 64 bits.
CMAC-AES128 The AES algorithm employed in CMAC mode with a 128 bit
key and the entire output.
2.1.3. Key: Authentication Key
The cryptographic key to be used to calculate the authentication
value.
2.1.4. Scope Attributes
The scope attributes specify which parts of the message are
authenticated.
The scope is specified by the start, header and content attributes.
The order in which the scope attributes are specified in the HTTP
Set-Session header is immaterial. The scope is always constructed in
the same order as the elements occur in a HTTP message, i.e. start,
dummy headers and content.
Content: Boolean If set true, the specified scope includes the
message body. The content transfer encoding (e.g. chunked) is
ignored for the purpose of determining the content.
Hallam-Baker Expires April 30, 2015 [Page 9]
Internet-Draft HTTP Session Management October 2014
ContentDigest: Label If a message digest algorithm is specified the
authentication scope MAY be calculated indirectly by first
calculating a Message Digest value over the content and using the
resulting value in place of the actual content value to calculate
the Message Authentication Code value.
Start: Boolean If set true, the specified scope includes the message
start line. This being the request Line in the case of a request
and the status line in the case of a response.
2.1.5. Replay Attacks
Preventing replay attacks in HTTP requests and responses poses
considerably different challenges. Since a HTTP response is always
immediately preceded by a request, return of a request nonce is
sufficient to prevent a response replay attack. This approach is
stateless and does not require client or server to store state
information.
Since the HTTP protocol requires that certain methods be idempotent,
the HTTP protocol does not lend itself to preventing request replay
attacks in the same fashion. Request replay MAY be prevented by use
of counter techniques or mitigated by limiting request replay to a
particular time window.
2.1.5.1. Request Replay Attack
Two mechanisms for preventing or mitigating request replay attacks
are specified:
Counter: Boolean Counter based mechanisms are supported by the count
attribute. The value of a counter MUST increase for successive
transactions within the same transaction stream. Concurrency MAY
be supported by specifying multiple streams but this requires a
separate counter state to be maintained for each transaction
stream.
Time: Boolean Time based approaches are supported by the time
attribute. If the value of the time attribute falls within the
permitted acceptance window, the message MAY be accepted.
Otherwise the message MUST be rejected.
Using a time based approach avoids the need to maintain state at
either the client or server. The principal disadvantage of this
approach being that the mechanism only protects against a replay
attack within a specific time.
Hallam-Baker Expires April 30, 2015 [Page 10]
Internet-Draft HTTP Session Management October 2014
Another disadvantage to the time based approach is that it relies
on the sender and receiver maintaining a tollerably close time
synchronization over the duration of the transaction and for the
latency introduced by the communication path being tollerably
small.
Neither method is entirely satisfactory. The counter mechanism
requires that the client and server both maintain state and the time
based mechanism only prevents request replay attack outside a
specified time interval.
For Web Services that require a stronger assurance that request
replay attack cannot succeed (e.g. payment transactions) without
maintaining server side state, such controls should be provided by
the Web Service protocol rather than relying on the HTTP session
continuation mechanism. For example, the Web Services protocol might
define a two phase interaction in which the client requested a server
nonce in the first phase to be returned in the second phase.
2.1.5.2. Response Replay Attack
If a HTTP Session header in a request specifies a nonce value, the
corresponding Session header in the response (if present) MUST
specify the same nonce value.
2.1.6. Direction
A session MAY be defined to apply to requests only, responses only or
to both requests and responses.
Request: Boolean This session context applies to requests.
Response: Boolean This session context applies to responses.
2.1.7. TLS Binding (Fixed)
The TLS binding attribute specifies whether TLS channel binding is to
be used.
2.1.8. Domain: String
The DNS Domain(s) to which the session context applies. The syntax
and semantics of the Domain attribute are identical to those of the
Domain attribute of the Cookie header defined in [].
Hallam-Baker Expires April 30, 2015 [Page 11]
Internet-Draft HTTP Session Management October 2014
2.2. Session Context State Attributes
2.2.1. Expiry time: Max-Age
The time at which the session expires. To avoid the need for the
client or server to have access to a realtime clock, Set-Session and
Session headers specify the expiry time as the remaining lifetime of
the session from the instant the header is generated in seconds.
A server MAY update the value Max-Age value to extend the lifetime of
the session before expiry by specifying a new value for Max-Age in
the Session header.
2.2.2. Now: Time Offset (Time)
The Time Offset value is used to calculate the value of the Now
attribute in the session header and is only required when the Time
replay protection mechanism is in use.
To avoid the need for clients or servers to have access to a
reference time source, time values used to protect against replay
attack are specified relative to an arbitrary epoch start time
specified by the server. The Time Offset value is the difference
between the time epoch specified by the server and the local time
according to the machine. A server MAY use the same epoch start time
for all clients or use a different epoch for each one.
2.2.2.1. Now: Last Now (Time)
If the local clock at the client runs faster or slower than that of
the server, a timing discrepancy emerges over time. A client SHOULD
and a server MAY correct for such inaccuracies by noting the value of
the now attribute specified by the other party and adjusting the
local time offset value accordingly provided that the mechanism
employed to do so ensures that the values of the now attribute in a
HTTP message is never less than the value specified in a previous
header.
Recording the value of the last value of Now specified in a header
permits this condition to be met.
2.2.3. Count: Last Count (Count)
If counter based replay attack prevention is in use the client and
server MUST maintain a record of the last value of the counter for
each concurrent stream active within the session.
Hallam-Baker Expires April 30, 2015 [Page 12]
Internet-Draft HTTP Session Management October 2014
2.2.4. Nonce: Last Nonce (Nonce)
If nonce based replay attack prevention is in use, the parties MUST
maintain a record of the last nonce value so as to be able to return
it when necessary.
In most circumstances the nonce value is used immediately and need
not be stored.
3. Syntax
The Accept-Session, Set-Session and Session headers use the following
common syntax elements
Label [ alpha (alpha | '-')* ]
Binary [Base 64 encoding of a binary value]
Offer [ "Optional" | "Required" | "Refused" ]
DTime [Decimal time value from current time]
Decimal [Decimal numeric value]
3.1. Accept-Session Header
The Accept-Session header is used to negotiate the establishment of
an authentication context. When used in a request the Accept-Session
header specifies a set of acceptable parameters for the session
context.
MAC=[Label(,Label)*] The message authentication algorithms the
client is willing to support.
Content=[Offer] Offers or requires the inclusion of the message
content in the authentication scope.
ContentDigest=[Offer] Offers or requires the inclusion of the
message content by means of a content digest in the authentication
scope.
Start=[Offer] Offers or requires the inclusion of the message start
line in the authentication scope.
Request=[Offer] Offers or requires the use of a Session header in a
request message.
Hallam-Baker Expires April 30, 2015 [Page 13]
Internet-Draft HTTP Session Management October 2014
Response=[Offer] Offers or requires the use of a Session header in a
response message.
TLSU=[Offer] Offers or requires the use of tls-unique TLS chanel
binding as specified in [RFC5929].
TLSE=[Offer] Offers or requires the use of tls-server-end-point TLS
chanel binding as specified in [RFC5929].
Nonce=[Offer] Offers or requires the use of the nonce response
replay attack prevention mechanism.
Counter=[Offer] Offers or requires the use of the counter request
replay attack prevention mechanism.
Time=[Optional | Required] Offers or requires the use of the time
request replay attack prevention mechanism.
When used by the client to offer the use of an authentication
session, all header attributes are optional. Note however that even
though it is permissable for a client to offer an empty Accept-
Session header, doing so does not allow a valid session context to be
established as the server is required to specify at least an
authentication scope and MAC algorithm from amongst those offered by
the client.
3.2. Set-Session Header
The Set-Session Header is specified in a response to accept an offer
of using the session continuation mechanism made by specifing accept-
session in the corresponding request.
The features specified in the Set-Session header MUST be consistent
with the features offered in the corresponding request.
Id=[Binary] The session context identifier in base64 encoding.
Key=[Binary] The cryptographic key to be used to calculate the
authentication value in base64 encoding.
MAC=[Label] The message authentication algorithm to be used to
calculate the authentication value as defined in [RFC5698] .
Content Specifies the inclusion of the message content in the
authentication scope.
ContentDigest Specifies the inclusion of the message content by
means of a content digest in the authentication scope.
Hallam-Baker Expires April 30, 2015 [Page 14]
Internet-Draft HTTP Session Management October 2014
Start Specifies the inclusion of the message start line in the
authentication scope.
Request Specifies the use of a Session header in a request message.
Response Specifies the use of a Session header in a response
message.
TLSBinging Specifies the use of TLS Binding [Need to think this
through further]
Counter=[Decimal] Specifies the use of the counter replay attack
prevention mechanism. The value of the attribute specifies the
maximum number of permitted streams.
Time=[NTime] Specifies the use of the time replay attack prevention
mechanism and the current value of the time value in seconds.
Servers SHOULD NOT use a time offset from a fixed epoch (e.g. 32
bit UNIX epoch).
Max-Age=[NTime] Specifies the number of seconds in which the session
parameters expire measured from the time at which the request was
issued.
A Set-Session header MUST contain the following elements:
Id
Key
MAC
At least one Scope attribute offered by the client
At least one direction attribute
A Max-Age value
3.3. Session Header
The Session header has the tag 'Session' and takes a sequence of
attribute values as follows:
[Insert ABNF here]
The session context identifier as in base64 encoding.
Hallam-Baker Expires April 30, 2015 [Page 15]
Internet-Draft HTTP Session Management October 2014
3.3.1. Value=[Binary] (required)
The value attribute specifies the value resulting from applying the
authentication context and nonce (if present) to the specified scope.
3.3.2. Nonce=[Binary]
The nonce attribute MAY be specified in a request. If a request
specifies a nonce attribute, the corresponding response MUST specify
a nonce attribute with the same value.
3.3.3. Stream=[Decimal]
The Stream attribute MUST NOT be specified in a request unless the
counter attribute is specified in the session context and the value
of the stream count is less than the number of permitted streams.
3.3.3.1. Count=[Decimal]
The Count attribute MUST NOT be specified in a request unless the
counter attribute is specified in the session context. The value of
the count attribute MUST be greater than the value of the count
attribute in all previous requests under the specified session with
the same stream attribute.
3.3.3.2. Time=[NTime]
Specifies a time value to be used in combination with the specified
authentication context. The format of the time value is determined
by the authentication context.
3.3.3.3. Attribute tlsu=[value]
Specifies the TLS unique channel binding as specified in [RFC5929].
3.3.3.4. Attribute tlss=[value]
Specifies the TLS server end point channel binding as specified in
[RFC5929].
3.3.4. Preparing the Input to the Authentication Algorithm
[Should specify how the content scope is assembles and how the replay
attack attributes are included within it.]
Hallam-Baker Expires April 30, 2015 [Page 16]
Internet-Draft HTTP Session Management October 2014
4. Processing
4.1. Calculating the Authentication Value
The input to the MAC algorithm is the concatenation of the following
values.
The Start Line Is included if and only if the value of the start
attribute of the session context is true.
The Canonical HTTP Headers Are always included.
The Message Content Is included if and only if the value of the
content attribute of the session context is true.
4.1.1. Start line
The Start line is the HTTP start line including the final CRLF.
Example:
4.1.2. Canonical Headers
The canonical form of the header(s) specified for inclusion in the
authentication scope by the session context sorted into alphabetical
order. At present only the Session header is specified and MUST
always be included.
The canonical Session header contains all the attributes of the
Session header to be added to the HTTP message with the exception of
the Value attribute. Attributes MUST be specified in alphabetical
order.
Example:
4.1.3. Message Content
If the Content-Digest parameter of the session context is empty the
Message content value is the actual value of the message content
ignoring any transfer encoding but after any content-encoding has
taken place.
If the Content-Digest parameter of the session context specifies at
least one Message Digest algorithm, the sender MAY chose to calculate
the authentication value over the actual value of the content as
specified above or first apply one of the specified message digest
algorithms to the actual value of the message content as specified
Hallam-Baker Expires April 30, 2015 [Page 17]
Internet-Draft HTTP Session Management October 2014
above and then calculate the authentication value over the resulting
digest value.
Example:
4.2. Generating a Session Header
Generating a Session Header requires the following steps to be
performed:
The Session header parameters are calculated according to the
session context.
If necessary, the session context is updated to reflect new values
of relevant replay attack prevention attributes.
The authentication value is calculated over the specified scope.
The Session header is added to the HTTP headers.
4.3. Verifying a HTTP Message under a Session Context
Verifying messages follows the same approach as generation. The
verifier calculates the authentication value over the input values as
specified in the session context. If the resulting authentication
value matches that specified by the sender, the authentication
succeeds and fails otherwise.
5. Security Considerations
5.1. Data outside the specified scope is not authenticated
The integrity check only extends to the portions of the message that
are within the specified scope.
5.2. Truncated Hash Algorithms
If the authentication context permits the use of a truncated MAC, it
MUST specify the minimum length of the MAC after truncation and
verifiers MUST reject MAC values shorter than that length as invalid.
5.3. Randomness of Secret Keys and nonces
The security of any cryptographic protocol relies on the difficulty
of guessing secret keys. Secret keys and nonces SHOULD be generated
using a mechanism that ensures that the range of possible values is
sufficiently large to prevent 'brute force' guessing attacks. For
more information see [RFC4086].
Hallam-Baker Expires April 30, 2015 [Page 18]
Internet-Draft HTTP Session Management October 2014
5.4. Weak Ciphers
Specification of the cryptographic algorithms used to construct the
Integrity header value is implicit in the authentication context
identifier and thus outside the scope of this specification.
6. IANA Considerations
Add the 'Accept-Session', 'Set-Session' and 'Session' headers to the
list of provisional HTTP headers.
Add the HMAC algorithm entries to the RFC 5698 regitry
http://www.iana.org/assignments/dssc/dssc.xml
[Upgrade if/when this becomes an RFC]
Create a registry for Session Header attributes. The initial
contents of the registry to be:
[Stuff from rest of document.]
7. References
7.1. Normative References
[RFC2104] Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed-
Hashing for Message Authentication", RFC 2104, February
1997.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
[RFC2965] Kristol, D. and L. Montulli, "HTTP State Management
Mechanism", RFC 2965, October 2000.
[RFC4086] Eastlake, D., Schiller, J., and S. Crocker, "Randomness
Requirements for Security", BCP 106, RFC 4086, June 2005.
[RFC4493] Song, JH., Poovendran, R., Lee, J., and T. Iwata, "The
AES-CMAC Algorithm", RFC 4493, June 2006.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security
(TLS) Protocol Version 1.2", RFC 5246, August 2008.
Hallam-Baker Expires April 30, 2015 [Page 19]
Internet-Draft HTTP Session Management October 2014
[RFC5698] Kunz, T., Okunick, S., and U. Pordesch, "Data Structure
for the Security Suitability of Cryptographic Algorithms
(DSSC)", RFC 5698, November 2009.
[RFC5929] Altman, J., Williams, N., and L. Zhu, "Channel Bindings
for TLS", RFC 5929, July 2010.
7.2. Non Normative References
[BEAST] "TBS", , <BEAST>.
[CRIME] "TBS", , <CRIME>.
[RFC3275] Eastlake, D., Reagle, J., and D. Solo, "(Extensible Markup
Language) XML-Signature Syntax and Processing", RFC 3275,
March 2002.
[RFC4120] Neuman, C., Yu, T., Hartman, S., and K. Raeburn, "The
Kerberos Network Authentication Service (V5)", RFC 4120,
July 2005.
[RFC5652] Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
RFC 5652, September 2009.
[RFC6265] Barth, A., "HTTP State Management Mechanism", RFC 6265,
April 2011.
Appendix A. Session Identifier Encoding
Author's Address
Phillip Hallam-Baker
Comodo Group Inc.
Email: philliph@comodo.com
Hallam-Baker Expires April 30, 2015 [Page 20]