Internet DRAFT - draft-ietf-dprive-dnsodtls
draft-ietf-dprive-dnsodtls
DPRIVE T. Reddy
Internet-Draft Cisco
Intended status: Experimental D. Wing
Expires: June 19, 2017
P. Patil
Cisco
December 16, 2016
Specification for DNS over Datagram Transport Layer Security (DTLS)
draft-ietf-dprive-dnsodtls-15
Abstract
DNS queries and responses are visible to network elements on the path
between the DNS client and its server. These queries and responses
can contain privacy-sensitive information which is valuable to
protect.
This document proposes the use of Datagram Transport Layer Security
(DTLS) for DNS, to protect against passive listeners and certain
active attacks. As latency is critical for DNS, this proposal also
discusses mechanisms to reduce DTLS round trips and reduce DTLS
handshake size. The proposed mechanism runs over port 853.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on June 19, 2017.
Copyright Notice
Copyright (c) 2016 IETF Trust and the persons identified as the
document authors. All rights reserved.
Reddy, et al. Expires June 19, 2017 [Page 1]
Internet-Draft DNS over DTLS December 2016
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Relationship to TCP Queries and to DNSSEC . . . . . . . . 3
1.2. Document Status . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Establishing and Managing DNS-over-DTLS Sessions . . . . . . 4
3.1. Session Initiation . . . . . . . . . . . . . . . . . . . 4
3.2. DTLS Handshake and Authentication . . . . . . . . . . . . 5
3.3. Established Sessions . . . . . . . . . . . . . . . . . . 5
4. Performance Considerations . . . . . . . . . . . . . . . . . 6
5. PMTU issues . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. Anycast . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
7. Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 8
9. Security Considerations . . . . . . . . . . . . . . . . . . . 9
10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 9
11. References . . . . . . . . . . . . . . . . . . . . . . . . . 9
11.1. Normative References . . . . . . . . . . . . . . . . . . 10
11.2. Informative References . . . . . . . . . . . . . . . . . 11
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 12
1. Introduction
The Domain Name System is specified in [RFC1034] and [RFC1035]. DNS
queries and responses are normally exchanged unencrypted and are thus
vulnerable to eavesdropping. Such eavesdropping can result in an
undesired entity learning domains that a host wishes to access, thus
resulting in privacy leakage. The DNS privacy problem is further
discussed in [RFC7626].
This document defines DNS over DTLS (DNS-over-DTLS) which provides
confidential DNS communication between stub resolvers and recursive
resolvers, stub resolvers and forwarders, forwarders and recursive
resolvers. DNS-over-DTLS puts an additional computational load on
servers. The largest gain for privacy is to protect the
communication between the DNS client (the end user's machine) and its
caching resolver. DNS-over-DTLS might work equally between recursive
Reddy, et al. Expires June 19, 2017 [Page 2]
Internet-Draft DNS over DTLS December 2016
clients and authoritative servers, but this application of the
protocol is out of scope for the DNS PRIVate Exchange (DPRIVE)
Working Group per its current charter. This document does not change
the format of DNS messages.
The motivations for proposing DNS-over-DTLS are that
o TCP suffers from network head-of-line blocking, where the loss of
a packet causes all other TCP segments to not be delivered to the
application until the lost packet is re-transmitted. DNS-over-
DTLS, because it uses UDP, does not suffer from network head-of-
line blocking.
o DTLS session resumption consumes 1 round trip whereas TLS session
resumption can start only after TCP handshake is complete.
However, with TCP Fast Open [RFC7413], the implementation can
achieve the same RTT efficiency as DTLS.
Note: DNS-over-DTLS is an experimental update to DNS, and the
experiment will be concluded when the specification is evaluated
through implementations and interoperability testing.
1.1. Relationship to TCP Queries and to DNSSEC
DNS queries can be sent over UDP or TCP. The scope of this document,
however, is only UDP. DNS over TCP can be protected with TLS, as
described in [RFC7858]. DNS-over-DTLS alone cannot provide privacy
for DNS messages in all circumstances, specifically when the DTLS
record size is larger than the path MTU. In such situations the DNS
server will respond with a truncated response (see Section 5).
Therefore DNS clients and servers that implement DNS-over-DTLS MUST
also implement DNS-over-TLS in order to provide privacy for clients
that desire Strict Privacy as described in
[I-D.ietf-dprive-dtls-and-tls-profiles].
DNS Security Extensions (DNSSEC [RFC4033]) provides object integrity
of DNS resource records, allowing end-users (or their resolver) to
verify legitimacy of responses. However, DNSSEC does not provide
privacy for DNS requests or responses. DNS-over-DTLS works in
conjunction with DNSSEC, but DNS-over-DTLS does not replace the need
or value of DNSSEC.
1.2. Document Status
This document is an Experimental RFC. One key aspect to judge
whether the approach is usable on a large scale is by observing the
uptake, usability, and operational behavior of the protocol in large-
scale, real-life deployments.
Reddy, et al. Expires June 19, 2017 [Page 3]
Internet-Draft DNS over DTLS December 2016
This DTLS solution was considered by the DPRIVE working group as an
option to use in case the TLS based approach specified in [RFC7858]
turns out to have some issues when deployed. At the time of writing,
it is expected that [RFC7858] is what will be deployed, and so this
specification is mainly intended as a backup.
The following guidelines should be considered when performance
benchmarking DNS over DTLS:
1. DNS over DTLS can recover from packet loss and reordering, and
does not suffer from network head-of-line blocking. DNS over
DTLS performance in comparison with DNS over TLS may be better in
lossy networks.
2. The number of round trips to send the first DNS query over DNS
over DTLS is less than the number of round trips to send the
first DNS query over TLS. Even if TCP Fast Open is used, it only
works for subsequent TCP connections between the DNS client and
server (Section 3 in [RFC7413]).
3. If DTLS 1.3 protocol [I-D.rescorla-tls-dtls13] is used for DNS
over DTLS, it provides critical latency improvements for
connection establishment over DTLS 1.2.
2. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
[RFC2119] .
3. Establishing and Managing DNS-over-DTLS Sessions
3.1. Session Initiation
By default, DNS-over-DTLS MUST run over standard UDP port 853 as
defined in Section 8, unless the DNS server has mutual agreement with
its clients to use a port other than 853 for DNS-over-DTLS. In order
to use a port other than 853, both clients and servers would need a
configuration option in their software.
The DNS client should determine if the DNS server supports DNS-over-
DTLS by sending a DTLS ClientHello message to port 853 on the server,
unless it has mutual agreement with its server to use a port other
than port 853 for DNS-over-DTLS. Such another port MUST NOT be port
53 but MAY be from the "first-come, first-served" port range (User
Ports [RFC6335], range 1024- 49151) . This recommendation against use
Reddy, et al. Expires June 19, 2017 [Page 4]
Internet-Draft DNS over DTLS December 2016
of port 53 for DNS-over-DTLS is to avoid complication in selecting
use or non-use of DTLS and to reduce risk of downgrade attacks.
A DNS server that does not support DNS-over-DTLS will not respond to
ClientHello messages sent by the client. If no response is received
from that server, and the client has no better round-trip estimate,
the client SHOULD retransmit the DTLS ClientHello according to
Section 4.2.4.1 of [RFC6347]. After 15 seconds, it SHOULD cease
attempts to re-transmit its ClientHello. The client MAY repeat that
procedure to discover if DNS-over-DTLS service becomes available from
the DNS server, but such probing SHOULD NOT be done more frequently
than every 24 hours and MUST NOT be done more frequently than every
15 minutes. This mechanism requires no additional signaling between
the client and server.
DNS clients and servers MUST NOT use port 853 to transport cleartext
DNS messages. DNS clients MUST NOT send and DNS servers MUST NOT
respond to cleartext DNS messages on any port used for DNS-over-DTLS
(including, for example, after a failed DTLS handshake). There are
significant security issues in mixing protected and unprotected data,
therefore UDP connections on a port designated by a given server for
DNS-over-DTLS are reserved purely for encrypted communications.
3.2. DTLS Handshake and Authentication
DNS client initiates DTLS handshake as described in [RFC6347],
following the best practices specified in [RFC7525]. After DTLS
negotiation completes, if the DTLS handshake succeeds according to
[RFC6347] the connection will be encrypted and is now protected from
eavesdropping.
DNS privacy requires encrypting the query (and response) from passive
attacks. Such encryption typically provides integrity protection as
a side-effect, which means on-path attackers cannot simply inject
bogus DNS responses. However, to provide stronger protection from
active attackers pretending to be the server, the server itself needs
to be authenticated. To authenticate the server providing DNS
privacy, DNS client MUST use the authenication mechanisms discussed
in [I-D.ietf-dprive-dtls-and-tls-profiles]. This document does not
propose new ideas for authentication.
3.3. Established Sessions
In DTLS, all data is protected using the same record encoding and
mechanisms. When the mechanism described in this document is in
effect, DNS messages are encrypted using the standard DTLS record
encoding. When a user of DTLS wishes to send a DNS message, the data
is delivered to the DTLS implementation as an ordinary application
Reddy, et al. Expires June 19, 2017 [Page 5]
Internet-Draft DNS over DTLS December 2016
data write (e.g., SSL_write()). A single DTLS session can be used to
send multiple DNS requests and receive multiple DNS responses.
To mitigate the risk of unintentional server overload, DNS-over-DTLS
clients MUST take care to minimize the number of concurrent DTLS
sessions made to any individual server. It is RECOMMENDED that for
any given client/server interaction there SHOULD be no more than one
DTLS session. Similarly, servers MAY impose limits on the number of
concurrent DTLS sessions being handled for any particular client IP
address or subnet. These limits SHOULD be much looser than the
client guidelines above, because the server does not know, for
example, if a client IP address belongs to a single client, is
multiple resolvers on a single machine, or is multiple clients behind
a device performing Network Address Translation (NAT).
In between normal DNS traffic while the communication to the DNS
server is quiescent, the DNS client MAY want to probe the server
using DTLS heartbeat [RFC6520] to ensure it has maintained
cryptographic state. Such probes can also keep alive firewall or NAT
bindings. This probing reduces the frequency of needing a new
handshake when a DNS query needs to be resolved, improving the user
experience at the cost of bandwidth and processing time.
A DTLS session is terminated by the receipt of an authenticated
message that closes the connection (e.g., a DTLS fatal alert). If
the server has lost state, a DTLS handshake needs to be initiated
with the server. For the server, to mitigate the risk of
unintentional server overload, it is RECOMMENDED that the default
DNS-over-DTLS server application-level idle time be set to several
seconds and not set to less than a second, but no particular value is
specified. When no DNS queries have been received from the client
after idle time out, the server MUST send a DTLS fatal alert and then
destroy its DTLS state. The DTLS fatal alert packet indicates the
server has destroyed its state, signaling to the client if it wants
to send a new DTLS message it will need to re-establish cryptographic
context with the server (via full DTLS handshake or DTLS session
resumption). In practice, the idle period can vary dynamically, and
servers MAY allow idle connections to remain open for longer periods
as resources permit.
4. Performance Considerations
DTLS protocol profile for DNS-over-DTLS is discussed in Section 11 of
[I-D.ietf-dprive-dtls-and-tls-profiles]. To reduce the number of
octets of the DTLS handshake, especially the size of the certificate
in the ServerHello (which can be several kilobytes), DNS clients and
servers can use raw public keys [RFC7250] or Cached Information
Extension [RFC7924]. Cached Information Extension avoids
Reddy, et al. Expires June 19, 2017 [Page 6]
Internet-Draft DNS over DTLS December 2016
transmitting the server's certificate and certificate chain if the
client has cached that information from a previous TLS handshake.
TLS False Start [RFC7918] can reduce round-trips by allowing the TLS
second flight of messages (ChangeCipherSpec) to also contain the
(encrypted) DNS query.
It is highly advantageous to avoid server-side DTLS state and reduce
the number of new DTLS sessions on the server which can be done with
TLS Session Resumption without server state [RFC5077]. This also
eliminates a round-trip for subsequent DNS-over-DTLS queries, because
with [RFC5077] the DTLS session does not need to be re-established.
Since responses within a DTLS session can arrive out of order,
clients MUST match responses to outstanding queries on the same DTLS
connection using the DNS Message ID. If the response contains a
question section, the client MUST match the QNAME, QCLASS, and QTYPE
fields. Failure by clients to properly match responses to
outstanding queries can have serious consequences for
interoperability ( [RFC7766], Section 7).
5. PMTU issues
Compared to normal DNS, DTLS adds at least 13 octets of header, plus
cipher and authentication overhead to every query and every response.
This reduces the size of the DNS payload that can be carried. DNS
client and server MUST support the EDNS0 option defined in [RFC6891]
so that the DNS client can indicate to the DNS server the maximum DNS
response size it can reassemble and deliver in the DNS client's
network stack. If the DNS client does set the EDNS0 option defined
in [RFC6891] then the maximum DNS response size of 512 bytes plus
DTLS overhead will be well within the Path MTU. If the Path MTU is
not known, an IP MTU of 1280 bytes SHOULD be assumed. The client
sets its EDNS0 value as if DTLS is not being used. The DNS server
MUST ensure that the DNS response size does not exceed the Path MTU
i.e. each DTLS record MUST fit within a single datagram, as required
by [RFC6347]. The DNS server must consider the amount of record
expansion expected by the DTLS processing when calculating the size
of DNS response that fits within the path MTU. Path MTU MUST be
greater than or equal to [DNS response size + DTLS overhead of 13
octets + padding size ([RFC7830]) + authentication overhead of the
negotiated DTLS cipher suite + block padding (Section 4.1.1.1 of
[RFC6347]]. If the DNS server's response were to exceed that
calculated value, the server MUST send a response that does fit
within that value and sets the TC (truncated) bit. Upon receiving a
response with the TC bit set and wanting to receive the entire
response, the client behaviour is governed by the current Usage
profile [I-D.ietf-dprive-dtls-and-tls-profiles]. For Strict Privacy
the client MUST only send a new DNS request for the same resource
Reddy, et al. Expires June 19, 2017 [Page 7]
Internet-Draft DNS over DTLS December 2016
record over an encrypted transport (e.g. DNS-over-TLS [RFC7858]).
Clients using Opportunistic Privacy SHOULD try for the best case (an
encrypted and authenticated transport) but MAY fallback to
intermediate cases and eventually the worst case scenario (clear
text) in order to obtain a response.
6. Anycast
DNS servers are often configured with anycast addresses. While the
network is stable, packets transmitted from a particular source to an
anycast address will reach the same server that has the cryptographic
context from the DNS-over-DTLS handshake. But when the network
configuration or routing changes, a DNS-over-DTLS packet can be
received by a server that does not have the necessary cryptographic
context. Clients using DNS-over-DTLS need to always be prepared to
re-initiate DTLS handshake and in the worst case this could even
happen immediately after re-initiating a new handshake. To encourage
the client to initiate a new DTLS handshake, DNS servers SHOULD
generate a DTLS fatal alert message in response to receiving a DTLS
packet for which the server does not have any cryptographic context.
Upon receipt of an un-authenicated DTLS fatal alert, the DTLS client
validates the fatal alert is within the replay window
(Section 4.1.2.6 of [RFC6347]). It is difficult for the DTLS client
to validate that the DTLS fatal alert was generated by the DTLS
server in response to a request or was generated by an on- or off-
path attacker. Thus, upon receipt of an in-window DTLS fatal alert,
the client SHOULD continue re-transmitting the DTLS packet (in the
event the fatal alert was spoofed), and at the same time it SHOULD
initiate DTLS session resumption. When the DTLS client receives an
authenticated DNS response from one of those DTLS sessions, the other
DTLS session should be terminated.
7. Usage
Two Usage Profiles, Strict and Opportunistic are explained in
[I-D.ietf-dprive-dtls-and-tls-profiles]. Using encrypted DNS
messages with an authenticated server is most preferred, encrypted
DNS messages with an unauthenticated server is next preferred, and
plain text DNS messages is least preferred.
8. IANA Considerations
This specification uses port 853 already allocated in the IANA port
number registry as defined in Section 6 of [RFC7858].
Reddy, et al. Expires June 19, 2017 [Page 8]
Internet-Draft DNS over DTLS December 2016
9. Security Considerations
The interaction between a DNS client and DNS server requires Datagram
Transport Layer Security (DTLS) with a ciphersuite offering
confidentiality protection. The guidance given in [RFC7525] MUST be
followed to avoid attacks on DTLS. The DNS client SHOULD use the TLS
Certificate Status Request extension (Section 8 of [RFC6066]),
commonly called "OCSP stapling" to check the revocation status of
public key certificate of the DNS server. OCSP stapling, unlike OCSP
[RFC6960], does not suffer from scale and privacy issues. DNS
clients keeping track of servers known to support DTLS enables
clients to detect downgrade attacks. To interfere with DNS-over-
DTLS, an on- or off-path attacker might send an ICMP message towards
the DTLS client or DTLS server. As these ICMP messages cannot be
authenticated, all ICMP errors should be treated as soft errors
[RFC1122]. If the DNS query was sent over DTLS then the
corresponding DNS response MUST only be accepted if it is received
over the same DTLS connection. This behavior mitigates all possible
attacks described in Measures for Making DNS More Resilient against
Forged Answers [RFC5452]. Security considerations in [RFC6347] and
[I-D.ietf-dprive-dtls-and-tls-profiles] are to be taken into account.
A malicious client might attempt to perform a high number of DTLS
handshakes with a server. As the clients are not uniquely identified
by the protocol and can be obfuscated with IPv4 address sharing and
with IPv6 temporary addresses, a server needs to mitigate the impact
of such an attack. Such mitigation might involve rate limiting
handshakes from a certain subnet or more advanced DoS/DDoS techniques
beyond the scope of this paper.
10. Acknowledgements
Thanks to Phil Hedrick for his review comments on TCP and to Josh
Littlefield for pointing out DNS-over-DTLS load on busy servers (most
notably root servers). The authors would like to thank Simon
Josefsson, Daniel Kahn Gillmor, Bob Harold, Ilari Liusvaara, Sara
Dickinson, Christian Huitema, Stephane Bortzmeyer, Alexander
Mayrhofer, Allison Mankin, Jouni Korhonen, Stephen Farrell, Mirja
Kuehlewind, Benoit Claise and Geoff Huston for discussions and
comments on the design of DNS-over-DTLS. The authors would like to
give special thanks to Sara Dickinson for her help.
11. References
Reddy, et al. Expires June 19, 2017 [Page 9]
Internet-Draft DNS over DTLS December 2016
11.1. Normative References
[RFC1034] Mockapetris, P., "Domain names - concepts and facilities",
STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987,
<http://www.rfc-editor.org/info/rfc1034>.
[RFC1035] Mockapetris, P., "Domain names - implementation and
specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
November 1987, <http://www.rfc-editor.org/info/rfc1035>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
[RFC4033] Arends, R., Austein, R., Larson, M., Massey, D., and S.
Rose, "DNS Security Introduction and Requirements",
RFC 4033, DOI 10.17487/RFC4033, March 2005,
<http://www.rfc-editor.org/info/rfc4033>.
[RFC5077] Salowey, J., Zhou, H., Eronen, P., and H. Tschofenig,
"Transport Layer Security (TLS) Session Resumption without
Server-Side State", RFC 5077, DOI 10.17487/RFC5077,
January 2008, <http://www.rfc-editor.org/info/rfc5077>.
[RFC5452] Hubert, A. and R. van Mook, "Measures for Making DNS More
Resilient against Forged Answers", RFC 5452,
DOI 10.17487/RFC5452, January 2009,
<http://www.rfc-editor.org/info/rfc5452>.
[RFC6347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer
Security Version 1.2", RFC 6347, DOI 10.17487/RFC6347,
January 2012, <http://www.rfc-editor.org/info/rfc6347>.
[RFC6520] Seggelmann, R., Tuexen, M., and M. Williams, "Transport
Layer Security (TLS) and Datagram Transport Layer Security
(DTLS) Heartbeat Extension", RFC 6520,
DOI 10.17487/RFC6520, February 2012,
<http://www.rfc-editor.org/info/rfc6520>.
[RFC6891] Damas, J., Graff, M., and P. Vixie, "Extension Mechanisms
for DNS (EDNS(0))", STD 75, RFC 6891,
DOI 10.17487/RFC6891, April 2013,
<http://www.rfc-editor.org/info/rfc6891>.
Reddy, et al. Expires June 19, 2017 [Page 10]
Internet-Draft DNS over DTLS December 2016
[RFC7525] Sheffer, Y., Holz, R., and P. Saint-Andre,
"Recommendations for Secure Use of Transport Layer
Security (TLS) and Datagram Transport Layer Security
(DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC7525, May
2015, <http://www.rfc-editor.org/info/rfc7525>.
[RFC7830] Mayrhofer, A., "The EDNS(0) Padding Option", RFC 7830,
DOI 10.17487/RFC7830, May 2016,
<http://www.rfc-editor.org/info/rfc7830>.
11.2. Informative References
[I-D.ietf-dprive-dtls-and-tls-profiles]
Dickinson, S., Gillmor, D., and T. Reddy, "Authentication
and (D)TLS Profile for DNS-over-(D)TLS", draft-ietf-
dprive-dtls-and-tls-profiles-07 (work in progress),
October 2016.
[I-D.rescorla-tls-dtls13]
Rescorla, E. and H. Tschofenig, "The Datagram Transport
Layer Security (DTLS) Protocol Version 1.3", draft-
rescorla-tls-dtls13-00 (work in progress), October 2016.
[RFC1122] Braden, R., Ed., "Requirements for Internet Hosts -
Communication Layers", STD 3, RFC 1122,
DOI 10.17487/RFC1122, October 1989,
<http://www.rfc-editor.org/info/rfc1122>.
[RFC6066] Eastlake 3rd, D., "Transport Layer Security (TLS)
Extensions: Extension Definitions", RFC 6066,
DOI 10.17487/RFC6066, January 2011,
<http://www.rfc-editor.org/info/rfc6066>.
[RFC6335] Cotton, M., Eggert, L., Touch, J., Westerlund, M., and S.
Cheshire, "Internet Assigned Numbers Authority (IANA)
Procedures for the Management of the Service Name and
Transport Protocol Port Number Registry", BCP 165,
RFC 6335, DOI 10.17487/RFC6335, August 2011,
<http://www.rfc-editor.org/info/rfc6335>.
[RFC6960] Santesson, S., Myers, M., Ankney, R., Malpani, A.,
Galperin, S., and C. Adams, "X.509 Internet Public Key
Infrastructure Online Certificate Status Protocol - OCSP",
RFC 6960, DOI 10.17487/RFC6960, June 2013,
<http://www.rfc-editor.org/info/rfc6960>.
Reddy, et al. Expires June 19, 2017 [Page 11]
Internet-Draft DNS over DTLS December 2016
[RFC7250] Wouters, P., Ed., Tschofenig, H., Ed., Gilmore, J.,
Weiler, S., and T. Kivinen, "Using Raw Public Keys in
Transport Layer Security (TLS) and Datagram Transport
Layer Security (DTLS)", RFC 7250, DOI 10.17487/RFC7250,
June 2014, <http://www.rfc-editor.org/info/rfc7250>.
[RFC7413] Cheng, Y., Chu, J., Radhakrishnan, S., and A. Jain, "TCP
Fast Open", RFC 7413, DOI 10.17487/RFC7413, December 2014,
<http://www.rfc-editor.org/info/rfc7413>.
[RFC7626] Bortzmeyer, S., "DNS Privacy Considerations", RFC 7626,
DOI 10.17487/RFC7626, August 2015,
<http://www.rfc-editor.org/info/rfc7626>.
[RFC7766] Dickinson, J., Dickinson, S., Bellis, R., Mankin, A., and
D. Wessels, "DNS Transport over TCP - Implementation
Requirements", RFC 7766, DOI 10.17487/RFC7766, March 2016,
<http://www.rfc-editor.org/info/rfc7766>.
[RFC7858] Hu, Z., Zhu, L., Heidemann, J., Mankin, A., Wessels, D.,
and P. Hoffman, "Specification for DNS over Transport
Layer Security (TLS)", RFC 7858, DOI 10.17487/RFC7858, May
2016, <http://www.rfc-editor.org/info/rfc7858>.
[RFC7918] Langley, A., Modadugu, N., and B. Moeller, "Transport
Layer Security (TLS) False Start", RFC 7918,
DOI 10.17487/RFC7918, August 2016,
<http://www.rfc-editor.org/info/rfc7918>.
[RFC7924] Santesson, S. and H. Tschofenig, "Transport Layer Security
(TLS) Cached Information Extension", RFC 7924,
DOI 10.17487/RFC7924, July 2016,
<http://www.rfc-editor.org/info/rfc7924>.
Authors' Addresses
Tirumaleswar Reddy
Cisco Systems, Inc.
Cessna Business Park, Varthur Hobli
Sarjapur Marathalli Outer Ring Road
Bangalore, Karnataka 560103
India
Email: tireddy@cisco.com
Reddy, et al. Expires June 19, 2017 [Page 12]
Internet-Draft DNS over DTLS December 2016
Dan Wing
Email: dwing-ietf@fuggles.com
Prashanth Patil
Cisco Systems, Inc.
Bangalore
India
Email: praspati@cisco.com
Reddy, et al. Expires June 19, 2017 [Page 13]
