Internet DRAFT - draft-ietf-httpbis-origin-frame
draft-ietf-httpbis-origin-frame
HTTP M. Nottingham
Internet-Draft
Intended status: Standards Track E. Nygren
Expires: July 17, 2018 Akamai
January 13, 2018
The ORIGIN HTTP/2 Frame
draft-ietf-httpbis-origin-frame-06
Abstract
This document specifies the ORIGIN frame for HTTP/2, to indicate what
origins are available on a given connection.
Note to Readers
Discussion of this draft takes place on the HTTP working group
mailing list (ietf-http-wg@w3.org), which is archived at
https://lists.w3.org/Archives/Public/ietf-http-wg/ [1].
Working Group information can be found at http://httpwg.github.io/
[2]; source code and issues list for this draft can be found at
https://github.com/httpwg/http-extensions/labels/origin-frame [3].
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on July 17, 2018.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
Nottingham & Nygren Expires July 17, 2018 [Page 1]
Internet-Draft ORIGIN Frames January 2018
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
1.1. Notational Conventions . . . . . . . . . . . . . . . . . 3
2. The ORIGIN HTTP/2 Frame . . . . . . . . . . . . . . . . . . . 3
2.1. Syntax . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2. Processing ORIGIN Frames . . . . . . . . . . . . . . . . 4
2.3. The Origin Set . . . . . . . . . . . . . . . . . . . . . 5
2.4. Authority, Push and Coalescing with ORIGIN . . . . . . . 6
3. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 7
4. Security Considerations . . . . . . . . . . . . . . . . . . . 7
5. References . . . . . . . . . . . . . . . . . . . . . . . . . 7
5.1. Normative References . . . . . . . . . . . . . . . . . . 7
5.2. Informative References . . . . . . . . . . . . . . . . . 8
5.3. URIs . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Appendix A. Non-Normative Processing Algorithm . . . . . . . . . 9
Appendix B. Operational Considerations for Servers . . . . . . . 9
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 10
1. Introduction
HTTP/2 [RFC7540] allows clients to coalesce different origins
[RFC6454] onto the same connection when certain conditions are met.
However, in certain cases, a connection is not usable for a coalesced
origin, so the 421 (Misdirected Request) status code ([RFC7540],
Section 9.1.2) was defined.
Using a status code in this manner allows clients to recover from
misdirected requests, but at the penalty of adding latency. To
address that, this specification defines a new HTTP/2 frame type,
"ORIGIN", to allow servers to indicate what origins a connection is
usable for.
Additionally, experience has shown that HTTP/2's requirement to
establish server authority using both DNS and the server's
certificate is onerous. This specification relaxes the requirement
to check DNS when the ORIGIN frame is in use. Doing so has
Nottingham & Nygren Expires July 17, 2018 [Page 2]
Internet-Draft ORIGIN Frames January 2018
additional benefits, such as removing the latency associated with
some DNS lookups.
1.1. Notational Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
2. The ORIGIN HTTP/2 Frame
This document defines a new HTTP/2 frame type ([RFC7540], Section 4)
called ORIGIN, that allows a server to indicate what origin(s)
[RFC6454] the server would like the client to consider as members of
the Origin Set (Section 2.3) for the connection it occurs within.
2.1. Syntax
The ORIGIN frame type is 0xc (decimal 12), and contains zero or more
instances of the Origin-Entry field.
+-------------------------------+-------------------------------+
| Origin-Entry (*) ...
+-------------------------------+-------------------------------+
An Origin-Entry is a length-delimited string:
+-------------------------------+-------------------------------+
| Origin-Len (16) | ASCII-Origin? ...
+-------------------------------+-------------------------------+
Specifically:
Origin-Len: An unsigned, 16-bit integer indicating the length, in
octets, of the ASCII-Origin field.
Origin: An OPTIONAL sequence of characters containing the ASCII
serialization of an origin ([RFC6454], Section 6.2) that the
sender asserts this connection is or could be authoritative for.
The ORIGIN frame does not define any flags. However, future updates
to this specification MAY define flags. See Section 2.2.
Nottingham & Nygren Expires July 17, 2018 [Page 3]
Internet-Draft ORIGIN Frames January 2018
2.2. Processing ORIGIN Frames
The ORIGIN frame is a non-critical extension to HTTP/2. Endpoints
that do not support this frame can safely ignore it upon receipt.
When received by an implementing client, it is used to initialise and
manipulate the Origin Set (see Section 2.3), thereby changing how the
client establishes authority for origin servers (see Section 2.4).
The ORIGIN frame MUST be sent on stream 0; an ORIGIN frame on any
other stream is invalid and MUST be ignored.
Likewise, the ORIGIN frame is only valid on connections with the "h2"
protocol identifier, or when specifically nominated by the protocol's
definition; it MUST be ignored when received on a connection with the
"h2c" protocol identifier.
This specification does not define any flags for the ORIGIN frame,
but future updates to this specification (through IETF consensus)
might use them to change its semantics. The first four flags (0x1,
0x2, 0x4 and 0x8) are reserved for backwards-incompatible changes,
and therefore when any of them are set, the ORIGIN frame containing
them MUST be ignored by clients conforming to this specification,
unless the flag's semantics are understood. The remaining flags are
reserved for backwards-compatible changes, and do not affect
processing by clients conformant to this specification.
The ORIGIN frame describes a property of the connection, and
therefore is processed hop-by-hop. An intermediary MUST NOT forward
ORIGIN frames. Clients configured to use a proxy MUST ignore any
ORIGIN frames received from it.
Each ASCII-Origin field in the frame's payload MUST be parsed as an
ASCII serialisation of an origin ([RFC6454], Section 6.2). If
parsing fails, the field MUST be ignored.
Note that the ORIGIN frame does not support wildcard names (e.g.,
"*.example.com") in Origin-Entry. As a result, sending ORIGIN when a
wildcard certificate is in use effectively disables any origins that
are not explicitly listed in the ORIGIN frame(s) (when the client
understands ORIGIN).
See Appendix A for an illustrative algorithm for processing ORIGIN
frames.
Nottingham & Nygren Expires July 17, 2018 [Page 4]
Internet-Draft ORIGIN Frames January 2018
2.3. The Origin Set
The set of origins (as per [RFC6454]) that a given connection might
be used for is known in this specification as the Origin Set.
By default, the Origin Set for a connection is uninitialised. An
uninitialized Origin Set means that clients apply the coalescing
rules from Section 9.1.1 of [RFC7540].
When an ORIGIN frame is first received and successfully processed by
a client, the connection's Origin Set is defined to contain an
initial origin. The initial origin is composed from:
o Scheme: "https"
o Host: the value sent in Server Name Indication (SNI, [RFC6066],
Section 3), converted to lower case; if SNI is not present, the
remote address of the connection (i.e., the server's IP address)
o Port: the remote port of the connection (i.e., the server's port)
The contents of that ORIGIN frame (and subsequent ones) allows the
server to incrementally add new origins to the Origin Set, as
described in Section 2.2.
The Origin Set is also affected by the 421 (Misdirected Request)
response status code, defined in [RFC7540], Section 9.1.2. Upon
receipt of a response with this status code, implementing clients
MUST create the ASCII serialisation of the corresponding request's
origin (as per [RFC6454], Section 6.2) and remove it from the
connection's Origin Set, if present.
Note: When sending an ORIGIN frame to a connection that is
initialised as an Alternative Service [RFC7838], the initial
origin set (Section 2.3) will contain an origin with the
appropriate scheme and hostname (since Alternative Services
specifies that the origin's hostname be sent in SNI). However, it
is possible that the port will be different than that of the
intended origin, since the initial origin set is calculated using
the actual port in use, which can be different for the alternative
service. In this case, the intended origin needs to be sent in
the ORIGIN frame explicitly.
For example, a client making requests for "https://example.com" is
directed to an alternative service at ("h2", "x.example.net",
"8443"). If this alternative service sends an ORIGIN frame, the
initial origin will be "https://example.com:8443". The client
will not be able to use the alternative service to make requests
Nottingham & Nygren Expires July 17, 2018 [Page 5]
Internet-Draft ORIGIN Frames January 2018
for "https://example.com" unless that origin is explicitly
included in the ORIGIN frame.
2.4. Authority, Push and Coalescing with ORIGIN
Section 10.1 of [RFC7540] uses both DNS and the presented TLS
certificate to establish the origin server(s) that a connection is
authoritative for, just as HTTP/1.1 does in [RFC7230].
Furthermore, Section 9.1.1 of [RFC7540] explicitly allows a
connection to be used for more than one origin server, if it is
authoritative. This affects what responses can be considered
authoritative, both for direct responses to requests and for server
push (see [RFC7540], Section 8.2.2). Indirectly, it also affects
what requests will be sent on a connection, since clients will
generally only send requests on connections that they believe to be
authoritative for the origin in question.
Once an Origin Set has been initialised for a connection, clients
that implement this specification use it to help determine what the
connection is authoritative for. Specifically, such clients MUST NOT
consider a connection to be authoritative for an origin not present
in the Origin Set, and SHOULD use the connection for all requests to
origins in the Origin Set for which the connection is authoritative,
unless there are operational reasons for opening a new connection.
Note that for a connection to be considered authoritative for a given
origin, the server is still required to authenticate with certificate
that passes suitable checks; see Section 9.1.1 of [RFC7540] for more
information. This includes verifying that the host matches a
"dNSName" value from the certificate "subjectAltName" field (using
the rules defined in [RFC2818]; see also [RFC5280], Section 4.2.1.6).
Additionally, clients MAY avoid consulting DNS to establish the
connection's authority for new requests to origins in the Origin Set;
however, those that do so face new risks, as explained in Section 4.
Because ORIGIN can change the set of origins a connection is used for
over time, it is possible that a client might have more than one
viable connection to an origin open at any time. When this occurs,
clients SHOULD NOT emit new requests on any connection whose Origin
Set is a proper subset of another connection's Origin Set, and SHOULD
close it once all outstanding requests are satisfied.
The Origin Set is unaffected by any alternative services [RFC7838]
advertisements made by the server. Advertising an alternative
service does not affect whether a server is authoritative.
Nottingham & Nygren Expires July 17, 2018 [Page 6]
Internet-Draft ORIGIN Frames January 2018
3. IANA Considerations
This specification adds an entry to the "HTTP/2 Frame Type" registry.
o Frame Type: ORIGIN
o Code: 0xc
o Specification: [this document]
4. Security Considerations
Clients that blindly trust the ORIGIN frame's contents will be
vulnerable to a large number of attacks. See Section 2.4 for
mitigations.
Relaxing the requirement to consult DNS when determining authority
for an origin means that an attacker who possesses a valid
certificate no longer needs to be on-path to redirect traffic to
them; instead of modifying DNS, they need only convince the user to
visit another Web site in order to coalesce connections to the target
onto their existing connection.
As a result, clients opting not to consult DNS ought to employ some
alternative means to establish a high degree of confidence that the
certificate is legitimate. For example, clients might skip
consulting DNS only if they receive proof of inclusion in a
Certificate Transparency log [RFC6962] or they have a recent OCSP
response [RFC6960] (possibly using the "status_request" TLS extension
[RFC6066]) showing that the certificate was not revoked.
The Origin Set's size is unbounded by this specification, and thus
could be used by attackers to exhaust client resources. To mitigate
this risk, clients can monitor their state commitment and close the
connection if it is too high.
5. References
5.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC2818] Rescorla, E., "HTTP Over TLS", RFC 2818,
DOI 10.17487/RFC2818, May 2000,
<https://www.rfc-editor.org/info/rfc2818>.
Nottingham & Nygren Expires July 17, 2018 [Page 7]
Internet-Draft ORIGIN Frames January 2018
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, "Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
<https://www.rfc-editor.org/info/rfc5280>.
[RFC6066] Eastlake 3rd, D., "Transport Layer Security (TLS)
Extensions: Extension Definitions", RFC 6066,
DOI 10.17487/RFC6066, January 2011,
<https://www.rfc-editor.org/info/rfc6066>.
[RFC6454] Barth, A., "The Web Origin Concept", RFC 6454,
DOI 10.17487/RFC6454, December 2011,
<https://www.rfc-editor.org/info/rfc6454>.
[RFC7540] Belshe, M., Peon, R., and M. Thomson, Ed., "Hypertext
Transfer Protocol Version 2 (HTTP/2)", RFC 7540,
DOI 10.17487/RFC7540, May 2015,
<https://www.rfc-editor.org/info/rfc7540>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
5.2. Informative References
[RFC6960] Santesson, S., Myers, M., Ankney, R., Malpani, A.,
Galperin, S., and C. Adams, "X.509 Internet Public Key
Infrastructure Online Certificate Status Protocol - OCSP",
RFC 6960, DOI 10.17487/RFC6960, June 2013,
<https://www.rfc-editor.org/info/rfc6960>.
[RFC6962] Laurie, B., Langley, A., and E. Kasper, "Certificate
Transparency", RFC 6962, DOI 10.17487/RFC6962, June 2013,
<https://www.rfc-editor.org/info/rfc6962>.
[RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
Protocol (HTTP/1.1): Message Syntax and Routing",
RFC 7230, DOI 10.17487/RFC7230, June 2014,
<https://www.rfc-editor.org/info/rfc7230>.
[RFC7838] Nottingham, M., McManus, P., and J. Reschke, "HTTP
Alternative Services", RFC 7838, DOI 10.17487/RFC7838,
April 2016, <https://www.rfc-editor.org/info/rfc7838>.
[RFC8288] Nottingham, M., "Web Linking", RFC 8288,
DOI 10.17487/RFC8288, October 2017,
<https://www.rfc-editor.org/info/rfc8288>.
Nottingham & Nygren Expires July 17, 2018 [Page 8]
Internet-Draft ORIGIN Frames January 2018
5.3. URIs
[1] https://lists.w3.org/Archives/Public/ietf-http-wg/
[2] http://httpwg.github.io/
[3] https://github.com/httpwg/http-extensions/labels/origin-frame
Appendix A. Non-Normative Processing Algorithm
The following algorithm illustrates how a client could handle
received ORIGIN frames:
1. If the client is configured to use a proxy for the connection,
ignore the frame and stop processing.
2. If the connection is not identified with the "h2" protocol
identifier or another protocol that has explicitly opted into
this specification, ignore the frame and stop processing.
3. If the frame occurs upon any stream except stream 0, ignore the
frame and stop processing.
4. If any of the flags 0x1, 0x2, 0x4 or 0x8 are set, ignore the
frame and stop processing.
5. If no previous ORIGIN frame on the connection has reached this
step, initialise the Origin Set as per Section 2.3.
6. For each "Origin-Entry" in the frame payload:
1. Parse "ASCII-Origin" as an ASCII serialization of an origin
([RFC6454], Section 6.2) and let the result be
"parsed_origin". If parsing fails, skip to the next "Origin-
Entry".
2. Add "parsed_origin" to the Origin Set.
Appendix B. Operational Considerations for Servers
The ORIGIN frame allows a server to indicate for which origins a
given connection ought be used. The set of origins advertised using
this mechanism is under control of the server; servers are not
obligated to use it, or to advertise all origins which they might be
able to answer a request for.
For example, it can be used to inform the client that the connection
is to only be used for the SNI-based origin, by sending an empty
Nottingham & Nygren Expires July 17, 2018 [Page 9]
Internet-Draft ORIGIN Frames January 2018
ORIGIN frame. Or, a larger number of origins can be indicated by
including a payload.
Generally, this information is most useful to send before sending any
part of a response that might initiate a new connection; for example,
"Link" header fields [RFC8288] in a response HEADERS, or links in the
response body.
Therefore, the ORIGIN frame ought be sent as soon as possible on a
connection, ideally before any HEADERS or PUSH_PROMISE frames.
However, if it's desirable to associate a large number of origins
with a connection, doing so might introduce end-user perceived
latency, due to their size. As a result, it might be necessary to
select a "core" set of origins to send initially, expanding the set
of origins the connection is used for with subsequent ORIGIN frames
later (e.g., when the connection is idle).
That said, senders are encouraged to include as many origins as
practical within a single ORIGIN frame; clients need to make
decisions about creating connections on the fly, and if the origin
set is split across many frames, their behaviour might be suboptimal.
Senders take note that, as per Section 4, Step 5 of [RFC6454], the
values in an ORIGIN header need to be case-normalised before
serialisation.
Finally, servers that host alternative services [RFC7838] will need
to explicitly advertise their origins when sending ORIGIN, because
the default contents of the Origin Set (as per Section 2.3) do not
contain any Alternative Services' origins, even if they have been
used previously on the connection.
Authors' Addresses
Mark Nottingham
Email: mnot@mnot.net
URI: https://www.mnot.net/
Erik Nygren
Akamai
Email: nygren@akamai.com
Nottingham & Nygren Expires July 17, 2018 [Page 10]
