Internet DRAFT - draft-ietf-l3vpn-mvpn-mib
draft-ietf-l3vpn-mvpn-mib
INTERNET-DRAFT Saud Asif
Intended Status: Proposed Standard AT&T
Expires: 2014-04-12 Andy Green
BT
Sameer Gulrajani
Cisco
Pradeep Jain
Alcatel-Lucent
Jeffrey Zhang
Juniper
2013-10-12
MPLS/BGP Layer 3 VPN Multicast
Management Information Base
draft-ietf-l3vpn-mvpn-mib-04
Abstract
This memo defines an portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes managed objects to configure and/or
monitor multicast in MPLS/BGP-based Layer-3 VPN (MVPN) on an MVPN
router.
Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as
Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/1id-abstracts.html
The list of Internet-Draft Shadow Directories can be accessed at
Jeffrey Zhang Expires 2014-04-12 [Page 1]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
http://www.ietf.org/shadow.html
Copyright and License Notice
Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
0 Draft history . . . . . . . . . . . . . . . . . . . . . . . . . 3
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Terminology . . . . . . . . . . . . . . . . . . . . . . . . 3
2 MVPN MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Summary of MIB Module . . . . . . . . . . . . . . . . . . . 4
2.2 MIB Module Definitions . . . . . . . . . . . . . . . . . . 5
3 Security Considerations . . . . . . . . . . . . . . . . . . . . 30
4 IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 30
5 Acknowledgement . . . . . . . . . . . . . . . . . . . . . . . . 30
6 References . . . . . . . . . . . . . . . . . . . . . . . . . . 30
6.1 Normative References . . . . . . . . . . . . . . . . . . . 30
6.2 Informative References . . . . . . . . . . . . . . . . . . 31
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 31
Jeffrey Zhang Expires 2014-04-12 [Page 2]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
0 Draft history
This draft is a first pass at a MIB document for [MVPN]. As such, it
should be considered as a early work.
Some aspects of BGP-MVPN (see definition below in "Introduction"),
such as exranet, may be specified in future revisions.
[note to author/reviewers: conformance groups to be added ]
[this section should be removed as soon as its stops being relevant]
1 Introduction
Multicast in MPLS/BGP L3 VPNs is specified in {[MVPN], [BGP-MVPN]}.
These specifications support either PIM or BGP as the protocol for
exchanging VPN multicast (referred to as C-multicast states, where
'C-' stands for 'VPN Customer-') among PEs. In the rest of this
document we'll use the term "PIM-MVPN" to refer to {[MVPN], [BGP-
MVPN]} with PIM being used for exchanging C-multicast states, and
"BGP-MVPN" to refer to {[MVPN], [BGP-MVPN]} with BGP is used for
exchanging C-multicast states.
This document defines a standard MIB for MVPN-specific objects that
are generic to both PIM-MVPN and BGP-MVPN.
This document borrowed some text from Cisco PIM-MVPN MIB [CISCO-MIB].
For PIM-MVPN this document attempts to provide coverage comparable
to [CISCO-MIB], but in a generic way that applies to both PIM-MVPN
and BGP-MVPN.
Comments should be made directly to the Layer-3 VPN (L3VPN) WG at
l3vpn@ietf.org.
1.1 Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
This document adopts the definitions, acronyms and mechanisms
described in [MVPN] and other documents that [MVPN] refers to.
Familiarity with Multicast, MPLS, L3VPN, MVPN concepts and/or
mechanisms is assumed.
Interchangeably, the term MVRF and MVPN are used to refer to a
partiular Multicast VPN instantiation on a particular PE device.
Jeffrey Zhang Expires 2014-04-12 [Page 3]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
2 MVPN MIB
This MIB enables configuring and/or monitoring of MVPNs on PE
devices: the whole multicast VPN machinery and the per-MVRFs
information, including the configuration, status and operational
details, such as different PMSIs and the provider tunnels
implementing them.
2.1 Summary of MIB Module
The configuration and states specific to an MVPN include the
following:
- C-multicast routing exchange protocol (PIM or BGP)
- I-PMSI, S-PMSI and corresponding provider tunnels
- Mapping of c-multicast states to PMSI/tunnels
To represent them, the following tables are defined.
+--------------+
| MvpnBgp |
| General |
+--------------+ +-------------------+ +-----------------+
| MvpnGeneral | -> | MvpnPmsiConfig | <- | MvpnSpmsiConfig |
+--------------+ +-------------------+ +-----------------+
+--------------+ +-------------------+ +-----------------+
| MvpnIpmsi | -> | L2L3VpnMcastPmsi | <- | MvpnSpmsi |
+--------------+ | TunnelAttribute | +-----------------+
-> +-------------------+
/ ^
/ |
+--------------+ +-------------------+
| MvpnInterAs | | MvpnMroute |
| Ipmsi | +-------------------+
+--------------+
- mvpnGeneralTable/Entry
An entry in this table is created for every MVRF in the device, for
general configuration/states of the MVRF, including I-PMSI
configuration.
Existence of the corresponding VRF in [L3VPN-MIB] is necessary for
Jeffrey Zhang Expires 2014-04-12 [Page 4]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
a row to exist in this table.
- mvpnBgpGeneralTable/Entry
This table augments mvpnGeneralTable and is for BGP-MVPN specific
information.
- mvpnSpmsiConfigTable/Entry
This table contains objects for S-PMSI configurations in an MVRF.
- mvpnPmsiConfigTable/Entry
Both I-PMSI configuration (in mvpnGeneralEntry) and S-PMSI
configuration (in mvpnSpmsiConfigEntry) refer to entries in this
table.
- mvpnIpmsiTable/Entry
This table contains all advertised or received intra-as I-PMSIs.
With PIM-MVPN, it is applicable only when BGP-Based Autodiscovery
of MVPN Membership is used.
- mvpnInterAsIpmsiTable/Entry
This table contains all advertised or received inter-as I-PMSIs.
With PIM-MVPN, it is applicable only when BGP-Based Autodiscovery
of MVPN Membership is used.
- mvpnSpmsiTable/Etnry
This table contains all advertised or received S-PMSIs.
- l2l3VpnMcastPmsiTunnelAttributeTable/Entry
This table is defined separately in l2L3VpnMcastMIB [L2L3MVPN-MIB],
which is common for both VPLS Multicast and MVPN. It contains
sent/received PMSI attribute entries referred to by mvpnIpmsiEntry,
mvpnSpmsiEntry, mvpnInterAsIpmsiEntry, and other MIB objects (e.g.,
VPLS Multicast ones).
- mvpnMrouteTable/Entry
This table augments ipMcastMIB.ipMcast.ipMcastRouteTable, for some
MVPN specific information.
2.2 MIB Module Definitions
Jeffrey Zhang Expires 2014-04-12 [Page 5]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
MCAST-VPN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
experimental, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue, RowPointer, RowStatus, TimeStamp, TimeInterval
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
MplsLabel
FROM MPLS-TC-STD-MIB
mplsL3VpnVrfName, MplsL3VpnRouteDistinguisher
FROM MPLS-L3VPN-STD-MIB
ipMcastRouteEntry
FROM IPMCAST-MIB
L2L3VpnMcastProviderTunnelType
FROM L2L3-VPN-MCAST-MIB;
mvpnMIB MODULE-IDENTITY
LAST-UPDATED "201301071200Z" -- 07 January 2013 12:00:00 GMT
ORGANIZATION "IETF Layer-3 Virtual Private
Networks Working Group."
CONTACT-INFO
" Jeffrey (Zhaohui) Zhang
zzhang@juniper.net
Comments and discussion to l3vpn@ietf.org"
DESCRIPTION
"This MIB contains managed object definitions for
multicast in BGP/MPLS IP VPNs defined by [MVPN].
Copyright (C) The Internet Society (2013)."
-- Revision history.
REVISION "201301071200Z" -- 07 January 2013 12:00:00 GMT
Jeffrey Zhang Expires 2014-04-12 [Page 6]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
DESCRIPTION
"Initial version of the draft."
::= { experimental 99 } -- number to be assigned
-- Top level components of this MIB.
mvpnNotifications OBJECT IDENTIFIER ::= { mvpnMIB 0 }
-- tables, scalars
mvpnObjects OBJECT IDENTIFIER ::= { mvpnMIB 1 }
-- conformance information
mvpnConformance OBJECT IDENTIFIER ::= { mvpnMIB 2 }
-- mvpn Objects
mvpnScalars OBJECT IDENTIFIER ::= { mvpnObjects 1 }
mvpnGeneral OBJECT IDENTIFIER ::= { mvpnObjects 2 }
mvpnConfig OBJECT IDENTIFIER ::= { mvpnObjects 3 }
mvpnStates OBJECT IDENTIFIER ::= { mvpnObjects 4 }
-- Scalar Objects
mvpnMvrfNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRFs for IPv4 or IPv6 or mLDP C-Multicast
that are present in this device."
::= { mvpnScalars 1 }
mvpnMvrfNumberV4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRFs for IPv4 C-Multicast that are present
in this device."
::= { mvpnScalars 2 }
mvpnMvrfNumberV6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MVRFs for IPv6 C-Multicast that are present
in this device."
::= { mvpnScalars 3 }
Jeffrey Zhang Expires 2014-04-12 [Page 7]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
mvpnMvrfNumberPimV4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM-MVPN MVRFs for IPv4 C-Multicast that are present
in this device."
::= { mvpnScalars 4 }
mvpnMvrfNumberPimV6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of PIM-MVPN MVRFs for IPv6 C-Multicast that are present
in this device."
::= { mvpnScalars 5 }
mvpnMvrfNumberBgpV4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP-MVPN MVRFs for IPv4 C-Multicast that are present
in this device."
::= { mvpnScalars 6 }
mvpnMvrfNumberBgpV6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP-MVPN MVRFs for IPv6 C-Multicast that are present
in this device."
::= { mvpnScalars 7 }
mvpnMvrfNumberMldp OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BGP-MVPN MVRFs for mLDP C-Multicast that are present
in this device."
::= { mvpnScalars 8 }
mvpnNotificationEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
Jeffrey Zhang Expires 2014-04-12 [Page 8]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
STATUS current
DESCRIPTION
"If this object is TRUE, then the generation of all
notifications defined in this MIB is enabled."
DEFVAL { false }
::= { mvpnScalars 9 }
-- General MVRF Information Table
mvpnGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvpnGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the general information about the MVRFs
present in this device."
::= { mvpnGeneral 1 }
mvpnGeneralEntry OBJECT-TYPE
SYNTAX MvpnGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for every MVRF in the
device."
INDEX { mplsL3VpnVrfName }
::= { mvpnGeneralTable 1 }
MvpnGeneralEntry ::= SEQUENCE {
mvpnGenOperStatusChange INTEGER,
mvpnGenOperChangeTime TimeStamp,
mvpnGenCmcastRouteProtocolV4 INTEGER,
mvpnGenCmcastRouteProtocolV6 INTEGER,
mvpnGenIpmsiConfigV4 RowPointer,
mvpnGenIpmsiConfigV6 RowPointer,
mvpnGenInterAsPmsiConfigV4 RowPointer,
mvpnGenInterAsPmsiConfigV6 RowPointer,
mvpnGenRowStatus RowStatus
}
mvpnGenOperStatusChange OBJECT-TYPE
SYNTAX INTEGER { createdMvrf(1),
deletedMvrf(2),
modifiedMvrfIpmsiConfig(3),
modifiedMvrfSpmsiConfig(4)
}
MAX-ACCESS read-only
STATUS current
Jeffrey Zhang Expires 2014-04-12 [Page 9]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
DESCRIPTION
"This object describes the last operational change that
happened for the given MVRF.
createdMvrf - indicates that the MVRF was created in the
device.
deletedMvrf - indicates that the MVRF was deleted from the
device. A row in this table will never have
mvpnGenOperStatusChange equal to deletedMvrf(2),
because in that case the row itself will be deleted from the
table. This value for mvpnGenOperStatusChange is defined
mainly for use in mvpnMvrfChange notification.
modifiedMvrfIpmsiConfig - indicates that the I-PMSI
for the MVRF was configured, deleted or changed.
modifiedMvrfSpmsiConfig - indicates that the S-PMSI
for the MVRF was configured, deleted or changed."
DEFVAL { createdMvrf }
::= { mvpnGeneralEntry 1 }
mvpnGenOperChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which the last operational change for the MVRF in
question took place. The last operational change is specified
by mvpnGenOperStatusChange."
::= { mvpnGeneralEntry 2 }
mvpnGenCmcastRouteProtocolV4 OBJECT-TYPE
SYNTAX INTEGER { pim (1),
bgp (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Protocol used to signal IPv4 C-multicast states across the
provider core.
pim(1): PIM (PIM-MVPN).
bgp(2): BGP (BGP-MVPN)."
::= { mvpnGeneralEntry 3 }
mvpnGenCmcastRouteProtocolV6 OBJECT-TYPE
SYNTAX INTEGER { pim (1),
bgp (2)
Jeffrey Zhang Expires 2014-04-12 [Page 10]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Protocol used to signal IPv6 C-multicast states across the
provider core.
pim(1): PIM (PIM-MVPN).
bgp(2): BGP (BGP-MVPN)."
::= { mvpnGeneralEntry 4 }
mvpnGenIpmsiConfigV4 OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This points to a row in mvpnPmsiConfigTable,
for I-PMSI configuration for IPv4."
::= { mvpnGeneralEntry 5 }
mvpnGenIpmsiConfigV6 OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This points to a row in mvpnPmsiConfigTable,
for I-PMSI configuration for IPv6."
::= { mvpnGeneralEntry 6 }
mvpnGenInterAsPmsiConfigV4 OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This points to a row in mvpnPmsiConfigTable,
for inter-as I-PMSI configuration for IPv4, in case of segmented
inter-as provider tunnels."
::= { mvpnGeneralEntry 7 }
mvpnGenInterAsPmsiConfigV6 OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This points to a row in mvpnPmsiConfigTable,
for inter-as I-PMSI configuration for IPv6, in case of segmented
inter-as provider tunnels."
::= { mvpnGeneralEntry 8 }
Jeffrey Zhang Expires 2014-04-12 [Page 11]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
mvpnGenRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is used to create or delete a row in this table."
::= { mvpnGeneralEntry 9 }
-- General BGP-MVPN table
mvpnBgpGeneralTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvpnBgpGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the mvpnGeneralTable and is for BGP-MVPN
specific information."
::= { mvpnGeneral 2 }
mvpnBgpGeneralEntry OBJECT-TYPE
SYNTAX MvpnBgpGeneralEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mvpnBgpGeneralEntry matches and augments an mvpnGeneralEntry
for a BGP-MVPN instance, with BGP-MVPN specific informatoin."
AUGMENTS { mvpnGeneralEntry }
::= { mvpnBgpGeneralTable 1 }
MvpnBgpGeneralEntry ::= SEQUENCE {
mvpnBgpGenMode INTEGER,
mvpnBgpGenUmhSelection INTEGER,
mvpnBgpGenSiteType INTEGER,
mvpnBgpGenCmcastImportRt MplsL3VpnRouteDistinguisher,
mvpnBgpGenSrcAs Unsigned32,
mvpnBgpGenSptnlLimit Unsigned32
}
mvpnBgpGenMode OBJECT-TYPE
SYNTAX INTEGER {
rpt-spt (1),
spt-only (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For two different BGP-MVPN modes:
rpt-spt(1): intersite-site shared tree mode
Jeffrey Zhang Expires 2014-04-12 [Page 12]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
spt-only(2): inter-site source-only tree mode."
::= { mvpnBgpGeneralEntry 1}
mvpnBgpGenUmhSelection OBJECT-TYPE
SYNTAX INTEGER {
highest-pe-address (1),
c-root-group-hashing (2),
ucast-umh-route (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UMH selection method for this mvpn, as specified in section
5.1.3 of [MVPN]:
highest-pe-address (1): PE with the highest address
c-root-group-hashing (2): hashing based on (c-root, c-group)
uncast-umh-route (3): per ucast route towards c-root"
::= { mvpnBgpGeneralEntry 2}
mvpnBgpGenSiteType OBJECT-TYPE
SYNTAX INTEGER {
sender-receiver (1),
receiver-only (2),
sender-only (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether this site is a receiver-only site or not.
sender-receiver (1): both sender and receiver site.
receiver-only (2): receiver-only site.
sender-only (3): sender-only site."
::= { mvpnBgpGeneralEntry 3}
mvpnBgpGenCmcastImportRt OBJECT-TYPE
SYNTAX MplsL3VpnRouteDistinguisher
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The C-multicast Import RT that this device adds to
unicast vpn routes that it advertises for this mvpn."
::= { mvpnBgpGeneralEntry 4}
mvpnBgpGenSrcAs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
Jeffrey Zhang Expires 2014-04-12 [Page 13]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
DESCRIPTION
"The Source AS number in Source AS Extended Community that this device
adds to the unicast vpn routes that it advertises for this mvpn."
::= { mvpnBgpGeneralEntry 5}
mvpnBgpGenSptnlLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The max number of selective provider tunnels this device allows
for this mvpn."
::= { mvpnBgpGeneralEntry 6}
-- PMSI Configuration Table
mvpnPmsiConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvpnPmsiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the configured PMSIs."
::= { mvpnConfig 1 }
mvpnPmsiConfigEntry OBJECT-TYPE
SYNTAX MvpnPmsiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for each PMSI configured
on this router. It can be referred to by either I-PMSI
configuration (in mvpnGeneralEntry) or S-PMSI configuration
(in mvpnSpmsiConfigEntry)"
INDEX { mvpnPmsiConfigTunnelType,
mvpnPmsiConfigTunnelAuxInfo,
mvpnPmsiConfigTunnelPimGroupAddressType,
mvpnPmsiConfigTunnelPimGroupAddress,
mvpnPmsiConfigTunnelOrTemplateName }
::= { mvpnPmsiConfigTable 1 }
MvpnPmsiConfigEntry ::= SEQUENCE {
mvpnPmsiConfigTunnelType L2L3VpnMcastProviderTunnelType,
mvpnPmsiConfigTunnelAuxInfo Unsigned32,
mvpnPmsiConfigTunnelPimGroupAddressType InetAddressType,
mvpnPmsiConfigTunnelPimGroupAddress InetAddress,
mvpnPmsiConfigTunnelOrTemplateName SnmpAdminString,
mvpnPmsiConfigEncapsType INTEGER,
mvpnPmsiConfigRowStatus RowStatus
Jeffrey Zhang Expires 2014-04-12 [Page 14]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
}
mvpnPmsiConfigTunnelType OBJECT-TYPE
SYNTAX L2L3VpnMcastProviderTunnelType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of tunnel used to instantiate the PMSI."
::= { mvpnPmsiConfigEntry 1 }
mvpnPmsiConfigTunnelAuxInfo OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional tunnel information depending on the type.
pim: In case of S-PMSI, number of groups starting at
mvpnPmsiConfigTunnelPimGroupAddress.
This allows a range of PIM provider tunnel
group addresses to be specified in S-PMSI case.
In I-PMSI case, it must be 1.
rsvp-p2mp: 1 for statically specified rsvp-p2mp tunnel
2 for dynamically created rsvp-p2mp tunnel
ingress-replication:
1 for using any existing p2p/mp2p lsp
2 for dynamically creating new p2p lsp"
::= { mvpnPmsiConfigEntry 2 }
mvpnPmsiConfigTunnelPimGroupAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"In case of PIM provider tunnel, the type of tunnel address."
::= { mvpnPmsiConfigEntry 3 }
mvpnPmsiConfigTunnelPimGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"In case of PIM provider tunnel, the provider tunnel address."
::= { mvpnPmsiConfigEntry 4 }
mvpnPmsiConfigTunnelOrTemplateName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
Jeffrey Zhang Expires 2014-04-12 [Page 15]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
DESCRIPTION
"The tunnel name or template name used to create tunnels.
Depending on mvpnPmsiConfigTunnelType and
mvpnPmsiConfigTunnelAuxInfo:
dynamically created rsvp-p2mp tunnel: template name
statically specified rsvp-p2mp tunnel: tunnel name
ingress-replication using
dynamically created lsps: template name
other: null"
::= { mvpnPmsiConfigEntry 5 }
mvpnPmsiConfigEncapsType OBJECT-TYPE
SYNTAX INTEGER { greIp (1),
ipIp (2),
mpls (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The encapsulation type to be used, in case of PIM tunnel or
ingress-replication."
::= { mvpnPmsiConfigEntry 6 }
mvpnPmsiConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to create/modify/delete a row in this table."
::= { mvpnPmsiConfigEntry 7 }
-- S-PMSI configuration table
mvpnSpmsiConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvpnSpmsiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies S-PMSI configuration."
::= { mvpnConfig 2 }
mvpnSpmsiConfigEntry OBJECT-TYPE
SYNTAX MvpnSpmsiConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created for each S-PMSI configuration."
Jeffrey Zhang Expires 2014-04-12 [Page 16]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
INDEX { mplsL3VpnVrfName,
mvpnSpmsiConfigCmcastAddressType,
mvpnSpmsiConfigCmcastGroupAddress,
mvpnSpmsiConfigCmcastGroupPrefixLen,
mvpnSpmsiConfigCmcastSourceAddress,
mvpnSpmsiConfigCmcastSourcePrefixLen }
::= { mvpnSpmsiConfigTable 1 }
MvpnSpmsiConfigEntry ::= SEQUENCE {
mvpnSpmsiConfigCmcastAddressType InetAddressType,
mvpnSpmsiConfigCmcastGroupAddress InetAddress,
mvpnSpmsiConfigCmcastGroupPrefixLen Unsigned32,
mvpnSpmsiConfigCmcastSourceAddress InetAddress,
mvpnSpmsiConfigCmcastSourcePrefixLen Unsigned32,
mvpnSpmsiConfigThreshold Unsigned32,
mvpnSpmsiConfigPmsiPointer RowPointer,
mvpnSpmsiConfigRowStatus RowStatus
}
mvpnSpmsiConfigCmcastAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Type of C-multicast address"
::= { mvpnSpmsiConfigEntry 1 }
mvpnSpmsiConfigCmcastGroupAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"C-multicast group address"
::= { mvpnSpmsiConfigEntry 2 }
mvpnSpmsiConfigCmcastGroupPrefixLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"C-multicast group address prefix length.
A group 0 (or ::0) with prefix length 32 (or 128)
indicates wildcard group, while a group 0 (or ::0)
with prefix length 0 indicates any group."
::= { mvpnSpmsiConfigEntry 3 }
mvpnSpmsiConfigCmcastSourceAddress OBJECT-TYPE
SYNTAX InetAddress
Jeffrey Zhang Expires 2014-04-12 [Page 17]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"C-multicast source address"
::= { mvpnSpmsiConfigEntry 4 }
mvpnSpmsiConfigCmcastSourcePrefixLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"C-multicast source address prefix length.
A source 0 (or ::0) with prefix length 32 (or 128)
indicates a wildcard source, while a source 0 (or ::0)
with prefix length 0 indicates any source."
::= { mvpnSpmsiConfigEntry 5 }
mvpnSpmsiConfigThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "kilobits per second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The bandwidth threshold value which when exceeded for a
multicast routing entry in the given MVRF, triggers usage
of S-PMSI."
::= { mvpnSpmsiConfigEntry 6 }
mvpnSpmsiConfigPmsiPointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This points to a row in mvpnPmsiConfigTable,
to specify tunnel attributes."
::= { mvpnSpmsiConfigEntry 7 }
mvpnSpmsiConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to create/modify/delete a row in this table."
::= { mvpnSpmsiConfigEntry 8 }
-- Table of intra-as I-PMSIs advertised/received
mvpnIpmsiTable OBJECT-TYPE
Jeffrey Zhang Expires 2014-04-12 [Page 18]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
SYNTAX SEQUENCE OF MvpnIpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for all advertised/received I-PMSI
advertisements."
::= { mvpnStates 1 }
mvpnIpmsiEntry OBJECT-TYPE
SYNTAX MvpnIpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table corresponds to an I-PMSI
advertisement that is advertised/received on this router.
This represents all the sender PEs in the MVPN,
with the provider tunnel they use to send traffic."
INDEX { mplsL3VpnVrfName,
mvpnIpmsiAfi,
mvpnIpmsiRD,
mvpnIpmsiOrigAddrType,
mvpnIpmsiOrigAddress }
::= { mvpnIpmsiTable 1 }
MvpnIpmsiEntry ::= SEQUENCE {
mvpnIpmsiAfi Unsigned32,
mvpnIpmsiRD MplsL3VpnRouteDistinguisher,
mvpnIpmsiOrigAddrType InetAddressType,
mvpnIpmsiOrigAddress InetAddress,
mvpnIpmsiUpTime TimeInterval,
mvpnIpmsiAttribute RowPointer
}
mvpnIpmsiAfi OBJECT-TYPE
SYNTAX Unsigned32 (1|2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address family this I-PMSI is for.
1 - IPv4
2 - IPv6"
::= { mvpnIpmsiEntry 1 }
mvpnIpmsiRD OBJECT-TYPE
SYNTAX MplsL3VpnRouteDistinguisher
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Jeffrey Zhang Expires 2014-04-12 [Page 19]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
"The Route Distinguisher in this I-PMSI."
::= { mvpnIpmsiEntry 2 }
mvpnIpmsiOrigAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address type of mvpnIpmsiOrigAddress."
::= { mvpnIpmsiEntry 3 }
mvpnIpmsiOrigAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP address of the device that originated the I-PMSI."
::= { mvpnIpmsiEntry 4 }
mvpnIpmsiUpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this I-PMSI
was first advertised/received by the device."
::= { mvpnIpmsiEntry 5 }
mvpnIpmsiAttribute OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Points to a row in the l2L3VpnMcastPmsiTunnelAttributeTable."
::= { mvpnIpmsiEntry 6 }
-- Table of inter-as I-PMSIs advertised/received
mvpnInterAsIpmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvpnInterAsIpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for all advertised/received inter-as I-PMSI
advertisements."
::= { mvpnStates 2 }
mvpnInterAsIpmsiEntry OBJECT-TYPE
Jeffrey Zhang Expires 2014-04-12 [Page 20]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
SYNTAX MvpnInterAsIpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table corresponds to an inter-as I-PMSI
advertisement that is advertised/received on this router.
This represents all the ASes in the MVPN,
with the provider tunnel used to send traffic to."
INDEX { mplsL3VpnVrfName,
mvpnInterAsIpmsiAfi,
mvpnInterAsIpmsiRD,
mvpnInterAsIpmsiSrcAs }
::= { mvpnInterAsIpmsiTable 1 }
MvpnInterAsIpmsiEntry ::= SEQUENCE {
mvpnInterAsIpmsiAfi Unsigned32,
mvpnInterAsIpmsiRD MplsL3VpnRouteDistinguisher,
mvpnInterAsIpmsiSrcAs Unsigned32,
mvpnInterAsIpmsiAttribute RowPointer
}
mvpnInterAsIpmsiAfi OBJECT-TYPE
SYNTAX Unsigned32 (1|2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address family this I-PMSI is for.
1 - IPv4
2 - IPv6"
::= { mvpnInterAsIpmsiEntry 1 }
mvpnInterAsIpmsiRD OBJECT-TYPE
SYNTAX MplsL3VpnRouteDistinguisher
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Route Distinguisher in this inter-as I-PMSI."
::= { mvpnInterAsIpmsiEntry 2 }
mvpnInterAsIpmsiSrcAs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source-as in this inter-as I-PMSI."
::= { mvpnInterAsIpmsiEntry 3 }
mvpnInterAsIpmsiAttribute OBJECT-TYPE
Jeffrey Zhang Expires 2014-04-12 [Page 21]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Points to a row in the l2L3VpnMcastPmsiTunnelAttributeTable."
::= { mvpnInterAsIpmsiEntry 4 }
-- Table of S-PMSIs advertised/received
mvpnSpmsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvpnSpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table has information about the S-PMSIs sent/received
by a device."
::= { mvpnStates 3 }
mvpnSpmsiEntry OBJECT-TYPE
SYNTAX MvpnSpmsiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created or updated for every S-PMSI
advertised/received in a particular MVRF."
INDEX { mplsL3VpnVrfName,
mvpnSpmsiCmcastAddrType,
mvpnSpmsiCmcastGroup,
mvpnSpmsiCmcastGroupPrefixLen,
mvpnSpmsiCmcastSource,
mvpnSpmsiCmcastSourcePrefixLen,
mvpnSpmsiOrigAddrType,
mvpnSpmsiOrigAddress}
::= { mvpnSpmsiTable 1 }
MvpnSpmsiEntry ::= SEQUENCE {
mvpnSpmsiCmcastAddrType InetAddressType,
mvpnSpmsiCmcastGroup InetAddress,
mvpnSpmsiCmcastGroupPrefixLen Unsigned32,
mvpnSpmsiCmcastSource InetAddress,
mvpnSpmsiCmcastSourcePrefixLen Unsigned32,
mvpnSpmsiOrigAddrType InetAddressType,
mvpnSpmsiOrigAddress InetAddress,
mvpnSpmsiTunnelAttribute RowPointer,
mvpnSpmsiUpTime TimeInterval,
mvpnSpmsiExpTime TimeInterval,
mvpnSpmsiRefCnt Unsigned32
}
Jeffrey Zhang Expires 2014-04-12 [Page 22]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
mvpnSpmsiCmcastAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address type of mvpnSpmsiCmcastGroup/Source."
::= { mvpnSpmsiEntry 1 }
mvpnSpmsiCmcastGroup OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"S-PMSI C-multicast group address.
If it is 0 (or ::0), this is a wildcard group,
and mvpnSpmsiCmcastGroupPrefixLen must be 32 (or 128)."
::= { mvpnSpmsiEntry 2 }
mvpnSpmsiCmcastGroupPrefixLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"S-PMSI C-multicast group address prefix length."
::= { mvpnSpmsiEntry 3 }
mvpnSpmsiCmcastSource OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"S-PMSI C-multicast source address
If it is 0 (or ::0), this is a wildcard source,
and mvpnSpmsiCmcastSourcePrefixLen must be 32 (or 128)."
::= { mvpnSpmsiEntry 4 }
mvpnSpmsiCmcastSourcePrefixLen OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"S-PMSI C-multicast source address prefix length."
::= { mvpnSpmsiEntry 5 }
mvpnSpmsiOrigAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
Jeffrey Zhang Expires 2014-04-12 [Page 23]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
DESCRIPTION
"The Internet address type of mvpnSpmsiOrigAddress."
::= { mvpnSpmsiEntry 6 }
mvpnSpmsiOrigAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The BGP address of the device that originated the S-PMSI."
::= { mvpnSpmsiEntry 7 }
mvpnSpmsiTunnelAttribute OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A row pointer to the l2L3VpnMcastPmsiTunnelAttributeTable"
::= { mvpnSpmsiEntry 8 }
mvpnSpmsiUpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this S-PMSI
was first advertised/received by the device."
::= { mvpnSpmsiEntry 9 }
mvpnSpmsiExpTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For UDP-based S-PMSI signaling for PIM-MVPN,
the amount of time remaining before this
received S-PMSI Join Message expires,
or the next S-PMSI Join Message refresh is to be
advertised again from the device.
Otherwise, it is 0."
::= { mvpnSpmsiEntry 10 }
mvpnSpmsiRefCnt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of c-multicast routes that are mapped to
Jeffrey Zhang Expires 2014-04-12 [Page 24]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
this S-PMSI."
::= { mvpnSpmsiEntry 11 }
-- Table of multicast routes in an MVPN
mvpnMrouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvpnMrouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments ipMcastRouteTable, to provide some MVPN
specific information."
::= { mvpnStates 4 }
mvpnMrouteEntry OBJECT-TYPE
SYNTAX MvpnMrouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mvpnMrouteEntry matches and augments an ipMcastRouteEntry,
with MVPN specific information, such as PMSI used."
AUGMENTS { ipMcastRouteEntry }
::= { mvpnMrouteTable 1 }
MvpnMrouteEntry ::= SEQUENCE {
mvpnMroutePmsiPointer RowPointer,
mvpnMrouteNumberOfLocalReplication Unsigned32,
mvpnMrouteNumberOfRemoteReplication Unsigned32,
mvpnMrouteDataRate Unsigned32
}
mvpnMroutePmsiPointer OBJECT-TYPE
SYNTAX RowPointer
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The I-PMSI or S-PMSI this C-multicast route is using.
This is important because an implementation may not have an
interface corresponding to a provider tunnel,
that can be used in ipMcastRouteNextHopEntry."
::= { mvpnMrouteEntry 1 }
mvpnMrouteNumberOfLocalReplication OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of replications to local receivers."
Jeffrey Zhang Expires 2014-04-12 [Page 25]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
::= { mvpnMrouteEntry 2 }
mvpnMrouteNumberOfRemoteReplication OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of (local) replications to remote receivers."
::= { mvpnMrouteEntry 3 }
mvpnMrouteDataRate OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The data rate for traffic following this route."
::= { mvpnMrouteEntry 4 }
-- MVPN Notifications
mvpnMvrfChange NOTIFICATION-TYPE
OBJECTS {
mvpnGenOperStatusChange
}
STATUS current
DESCRIPTION
"A mvpnMvrfChange notification signifies a change about
a MVRF in the device. The change event can be creation of
the MVRF, deletion of the MVRF or an update on the I-PMSI
or S-PMSI configuration of the MVRF. The change event
is indicated by mvpnGenOperStatusChange embedded in
the notification. The user can then query
mvpnGeneralTable, and/or mvpnSpmsiConfigTable to
get the details of the change as necessary.
Note: Since the creation of a MVRF is often followed by
configuration of I-PMSI and/or S-PMSIs for the MVRF,
more than one (three at most) notifications for a MVRF may
be generated serially, and it is really not necessary to
generate all three of them. An agent may choose to generate a
notification for the last event only, that is for S-PMSI
configuration.
Similarly, deletion of I-PMSI and S-PMSI configuration on a
MVRF happens before a MVRF is deleted and it is recommended
that the agent send the notification for MVRF deletion
event only."
Jeffrey Zhang Expires 2014-04-12 [Page 26]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
::= { mvpnNotifications 2 }
-- MVPN MIB Conformance Information
mvpnGroups OBJECT IDENTIFIER ::= { mvpnConformance 1 }
mvpnCompliances OBJECT IDENTIFIER ::= { mvpnConformance 2 }
-- Compliance Statements
mvpnCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement "
MODULE -- this module
MANDATORY-GROUPS {
mvpnScalarGroup,
mvpnGeneralGroup,
mvpnSpmsiConfigGroup,
mvpnSpmsiGroup,
mvpnMrouteGroup
}
GROUP mvpnIpmsiGroup
DESCRIPTION
"This group is mandatory for systems that support
BGP signaling for I-PMSI."
GROUP mvpnInterAsIpmsiGroup
DESCRIPTION
"This group is mandatory for systems that support
Inter-AS Segmented I-PMSI."
GROUP mvpnBgpGeneralGroup
DESCRIPTION
"This group is mandatory for systems that support
BGP-MVPN."
::= { mvpnCompliances 1 }
-- units of conformance
mvpnScalarGroup OBJECT-GROUP
OBJECTS {
mvpnMvrfNumber,
mvpnMvrfNumberV4,
mvpnMvrfNumberV6,
mvpnMvrfNumberPimV4,
Jeffrey Zhang Expires 2014-04-12 [Page 27]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
mvpnMvrfNumberPimV6,
mvpnMvrfNumberBgpV4,
mvpnMvrfNumberBgpV6,
mvpnMvrfNumberMldp,
mvpnNotificationEnable
}
STATUS current
DESCRIPTION
"These objects are used to monitor/manage
global MVPN parameters."
::= { mvpnGroups 1 }
mvpnGeneralGroup OBJECT-GROUP
OBJECTS {
mvpnGenOperStatusChange,
mvpnGenOperChangeTime,
mvpnGenCmcastRouteProtocolV4,
mvpnGenCmcastRouteProtocolV6,
mvpnGenIpmsiConfigV4,
mvpnGenIpmsiConfigV6,
mvpnGenInterAsPmsiConfigV4,
mvpnGenInterAsPmsiConfigV6,
mvpnGenRowStatus
}
STATUS current
DESCRIPTION
"These objects are used to monitor/manage
per-VRF MVPN parameters."
::= { mvpnGroups 2 }
mvpnPmsiConfigGroup OBJECT-GROUP
OBJECTS {
mvpnPmsiConfigEncapsType,
mvpnPmsiConfigRowStatus
}
STATUS current
DESCRIPTION
"These objects are used to monitor/manage
PMSI tunnel configurations."
::= { mvpnGroups 3 }
mvpnSpmsiConfigGroup OBJECT-GROUP
OBJECTS {
mvpnSpmsiConfigThreshold,
mvpnSpmsiConfigPmsiPointer,
mvpnSpmsiConfigRowStatus
}
STATUS current
Jeffrey Zhang Expires 2014-04-12 [Page 28]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
DESCRIPTION
"These objects are used to monitor/manage
S-PMSI configurations."
::= { mvpnGroups 4 }
mvpnIpmsiGroup OBJECT-GROUP
OBJECTS {
mvpnIpmsiUpTime,
mvpnIpmsiAttribute
}
STATUS current
DESCRIPTION
"These objects are used to monitor/manage
Intra-AS I-PMSI attributes."
::= { mvpnGroups 5 }
mvpnInterAsIpmsiGroup OBJECT-GROUP
OBJECTS {
mvpnInterAsIpmsiAttribute
}
STATUS current
DESCRIPTION
"These objects are used to monitor/manage
Inter-AS I-PMSI attributes."
::= { mvpnGroups 6 }
mvpnSpmsiGroup OBJECT-GROUP
OBJECTS {
mvpnSpmsiTunnelAttribute,
mvpnSpmsiUpTime,
mvpnSpmsiExpTime,
mvpnSpmsiRefCnt
}
STATUS current
DESCRIPTION
"These objects are used to monitor/manage
S-PMSI attributes."
::= { mvpnGroups 7 }
mvpnMrouteGroup OBJECT-GROUP
OBJECTS {
mvpnMrouteNumberOfLocalReplication,
mvpnMrouteNumberOfRemoteReplication,
mvpnMrouteDataRate
}
STATUS current
DESCRIPTION
"These objects are used to monitor/manage
Jeffrey Zhang Expires 2014-04-12 [Page 29]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
VPN multicast forwarding states."
::= { mvpnGroups 8 }
mvpnBgpGeneralGroup OBJECT-GROUP
OBJECTS {
mvpnBgpGenMode,
mvpnBgpGenUmhSelection,
mvpnBgpGenSiteType,
mvpnBgpGenCmcastImportRt,
mvpnBgpGenSrcAs,
mvpnBgpGenSptnlLimit
}
STATUS current
DESCRIPTION
"These objects are used to monitor/manage BGP-MVPN "
::= { mvpnGroups 9 }
mvpnOptionalGroup OBJECT-GROUP
OBJECTS {
mvpnMroutePmsiPointer
}
STATUS current
DESCRIPTION
"Support of these object is not required."
::= { mvpnGroups 10}
END
3 Security Considerations
<Security considerations text>
4 IANA Considerations
<IANA considerations text>
5 Acknowledgement
Some of the text has been taken almost verbatim from [CISCO-MIB].
We would like to thank Yakov Rekhter, Jeffrey Haas, Huajin Jeng,
Durga Prasad Velamuri for their helpful comments.
6 References
6.1 Normative References
Jeffrey Zhang Expires 2014-04-12 [Page 30]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
[KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC4382] Nadeau, T., Ed., and H. van der Linde, Ed., "MPLS/BGP
Layer 3 Virtual Private Network (VPN) Management
Information Base", RFC 4382, February 2006.
[MROUTE-MIB]McWalter, D., Thaler, D., and A. Kessler, "IP Multicast
MIB", RFC 5132, December 2007.
[MVPN] Eric C. Rosen, Rahul Aggarwal, et. al., Multicast in MPLS/BGP
IP VPNs, RFC 6513.
[BGP-MVPN] R. Aggarwal, E. Rosen, T. Morin, Y. Rekhter, BGP Encodings
and Procedures for Multicast in MPLS/BGP IP VPNs, RFC
6514.
[L2L3MVPN-MIB] Zhang, J., L2L3 VPN Multicast MIB, draft-zzhang-l2l3-
vpn-mcast-mib, Work In Progress.
6.2 Informative References
[CISCO-MIB] Susheela Vaidya, Thomas D. Nadeau, Harmen Van der Linde,
Multicast in BGP/MPLS IP VPNs Management Information Base,
draft-svaidya-mcast-vpn-mib-02.txt, Work In Progress,
April 2005.
Authors' Addresses
Saud Asif
AT&T
C5-3D30
200 South Laurel Avenue
Middletown, NJ 07748
USA
Email: sasif@att.com
Andy Green
BT Design 21CN Converged Core IP & Data
01473 629360
Adastral Park, Martlesham Heath, Ipswich IP5 3RE
UK
Email: andy.da.green@bt.com
Sameer Gulrajani
Cisco Systems
Tasman Drive
San Jose, CA 95134
Jeffrey Zhang Expires 2014-04-12 [Page 31]
INTERNET DRAFT L3VPN Multicast MIB 2013-10-12
USA
EMail: sameerg@cisco.com
Pradeep G. Jain
Alcatel-Lucent Inc
701 E Middlefield road
Mountain view, CA 94043
USA
Email: pradeep.jain@alcatel-lucent.com
Jeffrey (Zhaohui) Zhang
Juniper Networks, Inc.
10 Technology Park Drive
Westford, MA 01886
USA
Email: zzhang@juniper.net
Jeffrey Zhang Expires 2014-04-12 [Page 32]