Internet DRAFT - draft-ietf-nfsv4-rfc3530-migration-update
draft-ietf-nfsv4-rfc3530-migration-update
NFSv4 D. Noveck, Ed.
Internet-Draft HPE
Updates: 7530 (if approved) P. Shivam
Intended status: Standards Track C. Lever
Expires: August 4, 2016 B. Baker
ORACLE
February 1, 2016
NFSv4.0 migration: Specification Update
draft-ietf-nfsv4-rfc3530-migration-update-08
Abstract
The migration feature of NFSv4 allows for responsibility for a single
file system to move from one server to another, without disruption to
clients. Recent implementation experience has shown problems in the
existing specification for this feature in NFSv4.0. This document
identifies the problem areas and provides revised specification text
which updates the NFSv4.0 specification in RFC7530.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on August 4, 2016.
Copyright Notice
Copyright (c) 2016 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
Noveck, et al. Expires August 4, 2016 [Page 1]
Internet-Draft nfsv4-3530-migr-update February 2016
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Conventions . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
3.2. Data Type Definitions . . . . . . . . . . . . . . . . . . 5
4. Background . . . . . . . . . . . . . . . . . . . . . . . . . 5
5. Client Identity Definition . . . . . . . . . . . . . . . . . 7
5.1. Differences from Replaced Sections . . . . . . . . . . . 7
5.2. Client Identity Data Items . . . . . . . . . . . . . . . 8
5.2.1. Client Identity Structure . . . . . . . . . . . . . . 8
5.2.2. Client Identity Shorthand . . . . . . . . . . . . . . 10
5.3. Server Release of Client ID . . . . . . . . . . . . . . . 13
5.4. Client Id String Approaches . . . . . . . . . . . . . . . 13
5.5. Non-Uniform Client Id String Approach . . . . . . . . . . 15
5.6. Uniform Client Id String Approach . . . . . . . . . . . . 16
5.7. Mixing Client Id String Approaches . . . . . . . . . . . 18
5.8. Trunking Determination when Using Uniform Client Id
Strings . . . . . . . . . . . . . . . . . . . . . . . . . 19
5.9. Client Id String Construction Details . . . . . . . . . . 26
6. Locking and Multi-Server Namespace . . . . . . . . . . . . . 27
6.1. Lock State and File System Transitions . . . . . . . . . 28
6.1.1. Migration and State . . . . . . . . . . . . . . . . . 28
6.1.1.1. Migration and Client IDs . . . . . . . . . . . . 30
6.1.1.2. Migration and State Owner Information . . . . . . 31
6.1.2. Replication and State . . . . . . . . . . . . . . . . 35
6.1.3. Notification of Migrated Lease . . . . . . . . . . . 35
6.1.4. Migration and the Lease_time Attribute . . . . . . . 38
7. Server Implementation Considerations . . . . . . . . . . . . 39
7.1. Relation of Locking State Transfer to Other Aspects of
File System Motion . . . . . . . . . . . . . . . . . . . 39
7.2. Preventing Locking State Modification During Transfer . . 40
8. Additional Changes . . . . . . . . . . . . . . . . . . . . . 44
8.1. Summary of Additional Changes from Previous Documents . . 44
8.2. NFS4ERR_CLID_INUSE definition . . . . . . . . . . . . . . 45
8.3. NFS4ERR_DELAY return from RELEASE_LOCKOWNER . . . . . . . 45
8.4. Operation 35: SETCLIENTID - Negotiate Client ID . . . . . 46
8.5. Security Considerations for Inter-server Information
Transfer . . . . . . . . . . . . . . . . . . . . . . . . 50
8.6. Security Considerations Revision . . . . . . . . . . . . 50
9. Security Considerations . . . . . . . . . . . . . . . . . . . 51
10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 51
Noveck, et al. Expires August 4, 2016 [Page 2]
Internet-Draft nfsv4-3530-migr-update February 2016
11. References . . . . . . . . . . . . . . . . . . . . . . . . . 51
11.1. Normative References . . . . . . . . . . . . . . . . . . 51
11.2. Informative References . . . . . . . . . . . . . . . . . 51
Appendix A. Acknowledgements . . . . . . . . . . . . . . . . . . 52
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 52
1. Introduction
This document is a standards track document which corrects the
existing definitive specification of the NFSv4.0 protocol, in
[RFC7530]. Given this fact, one should take the current document
into account when learning about NFSv4.0, particularly if one is
concerned with issues that relate to:
o File system migration, particularly when it involves transparent
state migration.
o The construction and interpretation of the nfs_client_id4
structure and particularly the requirements on the id string
within it, referred to below as a "client id string".
2. Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
3. Definitions
3.1. Terminology
The following definitions are provided for the purpose of providing
an appropriate context for the reader. This section is derived from
Section 1.5 of [RFC7530] but has been adapted to the needs of this
document.
Boot instance id: A boot instance id, is an identifier, such as a
boot time, allowing two different instances of the same client to
be reliably distinguished. A boot instance id is opaque to the
server and is often used as the verifier field in the
nfs_client_id4 structure which identifies the client to the
server.
Client: A client is an entity that accesses the NFS server's
resources. The client may be an application that contains the
logic to access the NFS server directly. The client may also be
the traditional operating system client that provides remote file
system services for a set of applications.
Noveck, et al. Expires August 4, 2016 [Page 3]
Internet-Draft nfsv4-3530-migr-update February 2016
With reference to byte-range locking, the client is also the
entity that maintains a set of locks on behalf of one or more
applications. This client is responsible for crash or failure
recovery for those locks it manages.
Note that multiple clients may share the same transport and
connection, and multiple clients may exist on the same network
node.
Client ID: A client ID is a 64-bit quantity (in the form of a
clientid4) used as a unique, shorthand reference to particular
client instance, identified by client-supplied verifier (in the
form of a boot instance id) and client id string. The server is
responsible for supplying the client ID.
File System: A file system is the collection of objects on a server
that share the same fsid attribute (see Section 5.8.1.9 of
[RFC7530]).
Grace period: A grace period is an interval of time during which the
server will only grant locking requests to reclaim existing locks
but not those which create new locks. This give clients an
opportunity to re-establish locking state in response to a
potentially disruptive event. The grace period may be general, to
help deal with server reboot, or file-system-specific, to deal
with file system migration when transparent state migration is not
provided.
Lease: A lease is an interval of time defined by the server for
which the client is irrevocably granted a lock. At the end of a
lease period the lock may be revoked if the lease has not been
extended. The lock must be revoked if a conflicting lock has been
granted after the lease interval.
All leases granted by a server have the same fixed duration. Note
that the fixed interval duration was chosen to alleviate the
expense a server would have in maintaining state about variable-
length leases across server failures.
Lock: The term "lock" is used to refer to record (byte-range) locks
as well as share reservations unless specifically stated
otherwise.
Lock-Owner: Each byte-range lock is associated with a specific lock-
owner and an open-owner. The lock-owner consists of a client ID
and an opaque owner string. The client presents this to the
server to establish the ownership of the byte-range lock as
needed.
Noveck, et al. Expires August 4, 2016 [Page 4]
Internet-Draft nfsv4-3530-migr-update February 2016
Open-Owner: Each open file is associated with a specific open-owner,
which consists of a client ID and an opaque owner string. The
client presents this to the server to establish the ownership of
the open as needed.
Server: A server is an entity responsible for coordinating client
access to a set of file systems.
Stateid: A stateid is a 128-bit quantity returned by a server that
uniquely identifies the open and locking states provided by the
server for a specific open-owner or lock-owner/open-owner pair for
a specific file and type of lock.
Trunking: A situation in which multiple physical addresses are
connected to the same logical server.
Verifier: A verifier is a quantity, in the form of a verifier4, that
allows one party to an interaction to be aware of a re-
initialization or other significant change to the state of the
other party. In [RFC7530], this term most often designates the
verifier field of an nfs_client_id4, in which a boot instance id
is placed to allow the server to determine when there has been a
client reboot, making it necessary to eliminate locking state
associated with the previous instance of the same client.
3.2. Data Type Definitions
This section contains a table which shows where data types referred
to in this document are defined.
+-----------------+------------------------------+
| Item | Section |
+-----------------+------------------------------+
| cb_client4 | Section 2.2.11 in [RFC7530] |
| clientaddr4 | Section 2.2.10 in [RFC7530] |
| clientid4 | Section 2.1 in [RFC7530] |
| lock_owner4 | Section 2.2.14 in [RFC7530] |
| nfs_client_id4 | Section 5.2.1 |
| open_owner4 | Section 2.2.13 in [RFC7530] |
| verifier4 | Section 2.1 in [RFC7530] |
+-----------------+------------------------------+
4. Background
Implementation experience with transparent state migration has
exposed a number of problems with the then-existing specifications of
this feature, in [RFC7530] and predecessors. The symptoms were:
Noveck, et al. Expires August 4, 2016 [Page 5]
Internet-Draft nfsv4-3530-migr-update February 2016
o After migration of a file system, a reboot of the associated
client was not appropriately dealt with, in that the state
associated with the rebooting client was not promptly freed.
o Situations can arise whereby a given server has multiple leases
with the same nfs_client_id4 (consisting of id and verifier
fields), when the protocol clearly assumes there can be only one.
o Excessive client implementation complexity since clients have to
deal with situations in which a single client can wind up with its
locking state with a given server divided among multiple leases
each with its own clientid4.
An analysis of these symptoms leads to the conclusion that existing
specifications have erred. They assume that locking state, including
both state ids and clientid4's, should be transferred as part of
transparent state migration. The troubling symptoms arise from the
failure to describe how migrating state is to be integrated with
existing client definition structures on the destination server.
The need for the server to appropriately merge stateids associated
with a common client boot instance encounters a difficult problem.
The issue is that the common client practice with regard to the
presentation of unique strings specifying client identity makes it
essentially impossible for the client to determine whether or not two
stateids, originally generated on different servers are referable to
the same client. This practice is allowed and endorsed by the
existing NFSv4.0 specification ([RFC7530]).
However, upon prototyping of clients implementing an alternative
approach, it has been found that there exist servers which do not
work well with these new clients. It appears that current
circumstances, in which a particular client implementation pattern
had been adopted universally, has resulted in some servers not being
able to interoperate against alternate client implementation
patterns. As a result, we have a situation which requires careful
attention to compatibility issues to untangle.
This document updates the existing NFSv4.0 specification ([RFC7530])
as follows:
o It makes clear that NFSv4.0 supports multiple approaches to the
construction of client id strings, including that formerly
endorsed by existing NFSV4.0 specifications, and currently widely
deployed.
o It explains how clients can effectively use client id strings that
are presented to multiple servers.
Noveck, et al. Expires August 4, 2016 [Page 6]
Internet-Draft nfsv4-3530-migr-update February 2016
o It addresses the potential compatibility issues that might arise
for clients adopting a previously non-favored client id string
construction approach including the existence of servers which
have problems with the new approach.
o It gives some guidance regarding the factors that might govern
clients' choice of a client id string construction approach and
recommends that clients construct client id strings in manner that
supports lease merger if they intend to support transparent state
migration.
o It specifies how state is to be transparently migrated, including
defining how state that arrives at a new server as part of
migration is to be merged into existing leases for clients
connected to the target server.
o It makes further clarifications and corrections to address cases
where the specification text does not take proper account of the
issues raised by state migration or where it has been found that
the existing text is insufficiently clear. This includes a
revised definition of the SETCLIENTID operation in Section 8.4
which replaces Section 16.33 in [RFC7530]
For a more complete explanation of the choices made in addressing
these issues, see [info-migr]).
5. Client Identity Definition
This chapter is a replacement for sections 9.1.1 and 9.1.2 in
[RFC7530]. The replaced sections are named "Client ID" and "Server
Release of Client ID".
It supersedes the replaced sections.
5.1. Differences from Replaced Sections
Because of the need for greater attention to and careful description
of this area, this chapter is much larger than the sections it
replaces. The principal changes/additions made by this chapter are:
o It corrects inconsistencies regarding the possible role or non-
role of the client IP address in construction of client id
strings.
o It clearly addresses the need to maintain a non-volatile record
across reboots of client id strings or any changeable values that
are used in their construction.
Noveck, et al. Expires August 4, 2016 [Page 7]
Internet-Draft nfsv4-3530-migr-update February 2016
o It provides a more complete description of circumstances leading
to clientid4 invalidity and the appropriate recovery actions.
o It presents, as valid alternatives, two approaches to client id
string construction (named "uniform" and "non-uniform") and gives
some implementation guidance to help implementers choose one or
the other of these.
o It adds a discussion of issues involved for clients in interacting
with servers whose behavior is not consistent with use of uniform
client id strings
o It adds a description of how server behavior might be used by the
client to determine when multiple server IP addresses correspond
to the same server.
5.2. Client Identity Data Items
The NFSv4 protocol contains a number of protocol entities to identify
clients and client-based entities, for locking-related purposes:
o The nfs_client_id4 structure which uniquely identifies a specific
client boot instance. That identification is presented to the
server by doing a SETCLIENTID operation. The SETCLIENTID
operation is described in Section 8.4 which modifies a description
in Section 16.33 of [RFC7530]
o The clientid4 which is returned by the server upon completion of a
successful SETCLIENTID operation. This id is used by the client
to identify itself when doing subsequent locking-related
operations. A clientid4 is associated with a particular lease
whereby a client instance holds state on a server instance and may
become invalid due to client reboot, server reboot, or other
circumstances.
o Opaque arrays which are used together with the clientid4 to
designate within-client entities (e.g., processes) as the owners
of opens (open-owners) and owners of byte-range locks (lock-
owners).
5.2.1. Client Identity Structure
The basis of the client identification infrastructure is encapsulated
in the following data structure, which also appears in Section 9.1.1
of [RFC7530]:
Noveck, et al. Expires August 4, 2016 [Page 8]
Internet-Draft nfsv4-3530-migr-update February 2016
struct nfs_client_id4 {
verifier4 verifier;
opaque id<NFS4_OPAQUE_LIMIT>;
};
The nfs_client_id4 structure uniquely defines a particular client
boot instance as follows:
o The id field is a variable-length string which uniquely identifies
a specific client. Although, it is described here as a string and
it is often referred to as a "client string," it should be
understood that the protocol defines this as opaque data. In
particular, those receiving such an id should not assume that it
will be in the UTF-8 encoding. Servers MUST NOT reject an
nfs_client_id4 simply because the id string does not follow the
rules of UTF-8 encoding.
The encoding and decoding processes for this field (e.g., use of
network byte order) need to result in the same internal
representation whatever the endianness of the originating and
receiving machines.
o The verifier field contains a client boot instance identifier that
is used by the server to detect client reboots. Only if the boot
instance is different from that which the server has previously
recorded in connection with the client (as identified by the id
field) does the server cancel the client's leased state. This
cancellation occurs once it receives confirmation of the new
nfs_clientd4 via SETCLIENTID_CONFIRM. The SETCLIENTID_CONFIRM
operation is described in Section 16.34 of [RFC7530].
In order to prevent the possibility of malicious destruction of
the locking state associated with a client, the server MUST NOT
cancel a client's leased state if the principal that established
the state for a given id string is not the same as the principal
issuing the SETCLIENTID.
There are several considerations for how the client generates the id
string:
o The string should be unique so that multiple clients do not
present the same string. The consequences of two clients
presenting the same string range from one client getting an error
to one client having its leased state abruptly and unexpectedly
canceled.
o The string should be selected so that subsequent incarnations
(e.g., reboots) of the same client cause the client to present the
Noveck, et al. Expires August 4, 2016 [Page 9]
Internet-Draft nfsv4-3530-migr-update February 2016
same string. The implementer is cautioned against an approach
that requires the string to be recorded in a local file because
this precludes the use of the implementation in an environment
where there is no local disk and all file access is from an NFSv4
server.
o The string MAY be different for each server network address that
the client accesses, rather than common to all server network
addresses.
The considerations that might influence a client to use different
strings for different network server addresses are explained in
Section 5.4.
o The algorithm for generating the string should not assume that the
clients' network addresses will remain the same for any set period
of time. Changes might occur between client incarnations and even
while the client is still running in its current incarnation.
Changes to the client id string due to network address changes
would result in successive SETCLIENTID operations for the same
client appearing as from different clients, interfering with the
use of the nfs_client_id4 verifier field to cancel state
associated with previous boot instances of the same client.
The difficulty is more severe if the client address is the only
client-based information in the client id string. In such a case,
there is a real risk that, after the client gives up the network
address, another client, using the same algorithm, would generate
a conflicting id string. This would be likely to cause an
inappropriate loss of locking state. See Section 5.9 for detailed
guidance regarding client id string construction.
5.2.2. Client Identity Shorthand
Once a SETCLIENTID and SETCLIENTID_CONFIRM sequence has successfully
completed, the client uses the shorthand client identifier, of type
clientid4, instead of the longer and less compact nfs_client_id4
structure. This shorthand client identifier (a client ID) is
assigned by the server and should be chosen so that it will not
conflict with a client ID previously assigned by same server, and, to
the degree practicable, by other servers as well. This applies
across server restarts or reboots.
Establishment of Client ID by a new incarnation of the client also
has the effect of immediately breaking any leased state that a
previous incarnation of the client might have had on the server, as
opposed to forcing the new client incarnation to wait for the leases
Noveck, et al. Expires August 4, 2016 [Page 10]
Internet-Draft nfsv4-3530-migr-update February 2016
to expire. Breaking the lease state amounts to the server removing
all lock, share reservation, and, all delegation state not requested
using the CLAIM_DELEGATE_PREV claim type, associated with a client
having the same identity. For a discussion of delegation state
recovery, see Section 10.2.1 of [RFC7530].
Note that the SETCLIENTID and SETCLIENTID_CONFIRM operations have a
secondary purpose of establishing the information the server needs to
make callbacks to the client for the purpose of supporting
delegations. The client is able to change this information via
SETCLIENTID and SETCLIENTID_CONFIRM within the same incarnation of
the client without causing removal of the client's leased state.
Distinct servers MAY assign clientid4's independently, and will
generally do so. Therefore, a client has to be prepared to deal with
multiple instances of the same clientid4 value received on distinct
IP addresses, denoting separate entities. When trunking of server IP
addresses is not a consideration, a client should keep track of (IP-
address, clientid4) pairs, so that each pair is distinct. For a
discussion of how to address the issue in the face of possible
trunking of server IP addresses, see Section 5.4.
Owners of opens and owners of byte-range locks are separate entities
and remain separate even if the same opaque arrays are used to
designate owners of each. The protocol distinguishes between open-
owners (represented by open_owner4 structures) and lock-owners
(represented by lock_owner4 structures).
Both sorts of owners consist of a clientid4 and an opaque owner
string. For each client, the set of distinct owner values used with
that client constitutes the set of owners of that type, for the given
client.
Each open is associated with a specific open-owner while each byte-
range lock is associated with a lock-owner and an open-owner, the
latter being the open-owner associated with the open file under which
the LOCK operation was done.
When a clientid4 is presented to a server and that clientid4 is not
valid, the server will reject the request with the an error that
depends on the reason for clientid4 invalidity. The error
NFS4ERR_ADMIN_REVOKED is returned when the invalidation is the result
of administrative action. When the clientid4 is unrecognizable, the
error NFS4ERR_STALE_CLIENTID or NFS4ERR_EXPIRED may be returned. An
unrecognizable clientid4 can occur for a number of reasons:
o A server reboot causing loss of the server's knowledge of the
client. (Always returns NFS4ERR_STALE_CLIENTID)
Noveck, et al. Expires August 4, 2016 [Page 11]
Internet-Draft nfsv4-3530-migr-update February 2016
o Client error sending an incorrect clientid4 or a valid clientid4
to the wrong server. (May return either error).
o Loss of lease state due to lease expiration. (Always returns
NFS4ERR_EXPIRED)
o Client or server error causing the server to believe that the
client has rebooted (i.e., receiving a SETCLIENTID with an
nfs_client_id4 which has a matching id string and a non-matching
boot instance id as the verifier). (May return either error).
o Migration of all state under the associated lease causes its non-
existence to be recognized on the source server. (Always returns
NFS4ERR_STALE_CLIENTID)
o Merger of state under the associated lease with another lease
under a different client ID causes the clientid4 serving as the
source of the merge to cease being recognized on its server.
(Always returns NFS4ERR_STALE_CLIENTID)
In the event of a server reboot, loss of lease state due to lease
expiration, or administrative revocation of a clientid4, the client
must obtain a new clientid4 by use of the SETCLIENTID operation and
then proceed to any other necessary recovery for the server reboot
case (See Section 9.6.2 in [RFC7530]). In cases of server or client
error resulting in a clientid4 becoming unusable, use of SETCLIENTID
to establish a new lease is desirable as well.
In cases in which loss of server knowledge of a clientid4 is the
result of migration, different recovery procedures are required. See
Section 6.1.1 for details. Note that in cases in which there is any
uncertainty about which sort of handling is applicable, the
distinguishing characteristic is that in reboot-like cases, the
clientid4 and all associated stateids cease to exist while in
migration-related cases, the clientid4 ceases to exist while the
stateids are still valid.
The client must also employ the SETCLIENTID operation when it
receives a NFS4ERR_STALE_STATEID error using a stateid derived from
its current clientid4, since this indicates a situation, such as
server reboot which has invalidated the existing clientid4 and
associated stateids (see Section 9.1.5 in [RFC7530] for details).
See the detailed descriptions of SETCLIENTID (in Section 8.4) and
SETCLIENTID_CONFIRM (in Section 16.34 of [RFC7530]) for a complete
specification of these operations.
Noveck, et al. Expires August 4, 2016 [Page 12]
Internet-Draft nfsv4-3530-migr-update February 2016
5.3. Server Release of Client ID
If the server determines that the client holds no associated state
for its clientid4, the server may choose to release that clientid4.
The server may make this choice for an inactive client so that
resources are not consumed by those intermittently active clients.
If the client contacts the server after this release, the server must
ensure the client receives the appropriate error so that it will use
the SETCLIENTID/SETCLIENTID_CONFIRM sequence to establish a new
identity. It should be clear that the server must be very hesitant
to release a client ID since the resulting work on the client to
recover from such an event will be the same burden as if the server
had failed and restarted. Typically a server would not release a
client ID unless there had been no activity from that client for many
minutes.
Note that if the id string in a SETCLIENTID request is properly
constructed, and if the client takes care to use the same principal
for each successive use of SETCLIENTID, then, barring an active
denial of service attack, NFS4ERR_CLID_INUSE should never be
returned.
However, client bugs, server bugs, or perhaps a deliberate change of
the principal owner of the id string (such as may occur in the case
in which a client changes security flavors, and under the new flavor,
there is no mapping to the previous owner) will in rare cases result
in NFS4ERR_CLID_INUSE.
In situations in which there is an apparent change of principal, when
the server gets a SETCLIENTID specifying a client id string for which
the server has a clientid4 that currently has no state, or for which
it has state, but where the lease has expired, the server MUST allow
the SETCLIENTID, rather than returning NFS4ERR_CLID_INUSE. The
server MUST then confirm the new client ID if followed by the
appropriate SETCLIENTID_CONFIRM.
5.4. Client Id String Approaches
One particular aspect of the construction of the nfs_client_id4
string has proved recurrently troublesome. The client has a choice
of:
o Presenting the same id string to multiple server addresses. This
is referred to as the "uniform client id string approach" and is
discussed in Section 5.6.
Noveck, et al. Expires August 4, 2016 [Page 13]
Internet-Draft nfsv4-3530-migr-update February 2016
o Presenting different id strings to multiple server addresses.
This is referred to as the "non-uniform client id string approach"
and is discussed in Section 5.5.
Note that implementation considerations, including compatibility with
existing servers, may make it desirable for a client to use both
approaches, based on configuration information, such as mount
options. This issue will be discussed in Section 5.7.
Construction of the client id string has arisen as a difficult issue
because of the way in which the NFS protocols have evolved. It is
useful to consider two points in that evolution.
o NFSv3 as a stateless protocol had no need to identify the state
shared by a particular client-server pair. (See [RFC1813]). Thus
there was no need to consider the question of whether a set of
requests come from the same client, or whether two server IP
addresses are connected to the same server. As the environment
was one in which the user supplied the target server IP address as
part of incorporating the remote file system in the client's file
name space, there was no occasion to take note of server trunking.
Within a stateless protocol, the situation was symmetrical. The
client has no server identity information and the server has no
client identity information.
o NFSv4.1 is a stateful protocol with full support for client and
server identity determination (See [RFC5661]). This enables the
server to be aware when two requests come from the same client
(they are on sessions sharing a clientid4) and the client to be
aware when two server IP addresses are connected to the same
server. Section 2.10.5.1 of [RFC5661] explains how the client is
able to assure itself that the connections are to the same logical
server.
NFSv4.0 is unfortunately halfway between these two. It introduced
new requirements such as the need to identify specific clients and
client instances without addressing server identity issues. The two
client id string approaches have arisen in attempts to deal with the
changing requirements of the protocol as implementation has proceeded
and features that were not very substantial in early implementations
of NFSv4.0, became more substantial as implementation proceeded.
o In the absence of any implementation of the fs_locations-related
features (replication, referral, and migration), the situation is
very similar to that of NFSv3 (see Section 8.1 and the subsections
within section 8.4 of [RFC7530] for discussion of these features.
In this case, locking state has been added but there is no need
for concern about provision of accurate client and server identity
Noveck, et al. Expires August 4, 2016 [Page 14]
Internet-Draft nfsv4-3530-migr-update February 2016
determination. This is the situation that gave rise to the non-
uniform client id string approach.
o In the presence of replication and referrals, the client may have
occasion to take advantage of knowledge of server trunking
information. Even more important, transparent state migration, by
transferring state among servers, causes difficulties for the non-
uniform client id string approach, in that the two different
client id strings sent to different IP addresses may wind up being
processed by the same logical server, adding confusion.
o A further consideration is that client implementations typically
provide NFSv4.1 by augmenting their existing NFSv4.0
implementation, not by providing two separate implementations.
Thus the more NFSv4.0 and NFSv4.1 can work alike, the less complex
are clients. This is a key reason why those implementing NFSv4.0
clients might prefer using the uniform client string model, even
if they have chosen not to provide fs_locations-related features
in their NFSv4.0 client.
Both approaches have to deal with the asymmetry in client and server
identity information between client and server. Each seeks to make
the client's and the server's views match. In the process, each
encounters some combination of inelegant protocol features and/or
implementation difficulties. The choice of which to use is up to the
client implementer and the sections below try to give some useful
guidance.
5.5. Non-Uniform Client Id String Approach
The non-uniform client id string approach is an attempt to handle
these matters in NFSv4.0 client implementations in as NFSv3-like a
way as possible.
For a client using the non-uniform approach, all internal recording
of clientid4 values is to include, whether explicitly or implicitly,
the server IP address so that one always has an (IP-address,
clientid4) pair. Two such pairs from different servers are always
distinct even when the clientid4 values are the same, as they may
occasionally be. In this approach, such equality is always treated
as simple happenstance.
Making the client id string different on different server IP
addresses results in a situation in which a server has no way of
tying together information from the same client, when the client
accesses multiple server IP addresses. As a result, it will treat a
single client as multiple clients with separate leases for each
server network address. Since there is no way in the protocol for
Noveck, et al. Expires August 4, 2016 [Page 15]
Internet-Draft nfsv4-3530-migr-update February 2016
the client to determine if two network addresses are connected to the
same server, the resulting lack of knowledge is symmetrical and can
result in simpler client implementations in which there is a single
clientid4/lease per server network address.
Support for migration, particularly with transparent state migration,
is more complex in the case of non-uniform client id strings. For
example, migration of a lease can result in multiple leases for the
same client accessing the same server addresses, vitiating many of
the advantages of this approach. Therefore, client implementations
that support migration with transparent state migration are likely to
experience difficulties using the non-uniform client id string
approach, and should not do so, except where it is necessary for
compatibility with existing server implementations (For details of
arranging use of multiple client id string approaches, see
Section 5.7).
5.6. Uniform Client Id String Approach
When the client id string is kept uniform, the server has the basis
to have a single clientid4/lease for each distinct client. The
problem that has to be addressed is the lack of explicit server
identity information, which was made available in NFSv4.1.
When the same client id string is given to multiple IP addresses, the
client can determine whether two IP addresses correspond to a single
server, based on the server's behavior. This is the inverse of the
strategy adopted for the non-uniform approach in which different
server IP addresses are told about different clients, simply to
prevent a server from manifesting behavior that is inconsistent with
there being a single server for each IP address, in line with the
traditions of NFS. So, to compare:
o In the non-uniform approach, servers are told about different
clients because, if the server were to use accurate information as
to client identity, two IP addresses on the same server would
behave as if they were talking to the same client, which might
prove disconcerting to a client not expecting such behavior.
o In the uniform approach, the servers are told about there being a
single client, which is, after all, the truth. Then, when the
server uses this information, two IP addresses on the same server
will behave as if they are talking to the same client, and this
difference in behavior allows the client to infer the server IP
address trunking configuration, even though NFSv4.0 does not
explicitly provide this information.
Noveck, et al. Expires August 4, 2016 [Page 16]
Internet-Draft nfsv4-3530-migr-update February 2016
The approach given in the section below shows one example of how
this might be done.
The uniform client id string approach makes it necessary to exercise
more care in the definition of the boot instance id sent as the
verifier field in an nfs_client_id4:
o In [RFC7530], the client is told to change the verifier field
value when reboot occurs, but there is no explicit statement as to
the converse, so that any requirement to keep the verifier field
constant unless rebooting is only present by implication.
o Many existing clients change the boot instance id every time they
destroy and recreate the data structure that tracks an <IP-
address, clientid4> pair. This might happen if the last mount of
a particular server is removed, and then a fresh mount is created.
Also, note that this might result in each <IP-address, clientid4>
pair having its own boot instance id that is independent of the
others.
o Within the uniform client id string approach, an nfs_client_id4
designates a globally known client instance, so that the verifier
field should change if and only if a new client instance is
created, typically as a result of a reboot.
Clients using the uniform client id string approach are therefore
well advised to use a verifier established only once for each
reboot, typically at reboot time.
The following are advantages for the implementation of using the
uniform client id string approach:
o Clients can take advantage of server trunking (and clustering with
single-server-equivalent semantics) to increase bandwidth or
reliability.
o There are advantages in state management so that, for example, one
never has a delegation under one clientid4 revoked because of a
reference to the same file from the same client under a different
clientid4.
o The uniform client id string approach allows the server to do any
necessary automatic lease merger in connection with transparent
state migration, without requiring any client involvement. This
consideration is of sufficient weight to cause us to recommend use
of the uniform client id string approach for clients supporting
transparent state migration.
Noveck, et al. Expires August 4, 2016 [Page 17]
Internet-Draft nfsv4-3530-migr-update February 2016
The following implementation considerations might cause issues for
client implementations.
o This approach is considerably different from the non-uniform
approach, which most client implementations have been following.
Until substantial implementation experience is obtained with this
approach, reluctance to embrace something so new is to be
expected.
o Mapping between server network addresses and leases is more
complicated in that it is no longer a one-to-one mapping.
Another set of relevant considerations relate to privacy concerns,
which users of the client might have in that use of the uniform
client id string approach would enable multiple servers acting in
concert to determine when multiple requests received at different
times, derive from the same NFSv4 client. For example, this might
enable determination that multiple distinct user identities, in fact
are likely to correspond to requests made by the same person, even
when those request are directed to different servers.
How to balance these considerations depends on implementation goals.
5.7. Mixing Client Id String Approaches
As noted above, a client which needs to use the uniform client id
string approach (e.g., to support migration), may also need to
support existing servers with implementations that do not work
properly in this case.
Some examples of such server issues include:
o Some existing NFSv4.0 server implementations of IP address
failover depend on clients' use of a non-uniform client id string
approach. In particular, when a server supports both its own IP
address and one failed over from a partner server, it may have
separate sets of state applicable to the two IP addresses, owned
by different servers but residing on a single one.
In this situation, some servers have relied on clients' use of the
non-uniform client id string approach, as suggested but not
mandated by [RFC7530], to keep these sets of state separate, and
will have problems in handling clients using the uniform client id
string approach, in that such clients will see changes in trunking
relationships whenever server failover and giveback occur.
o Some existing servers incorrectly return NFS4ERR_CLID_INUSE simply
because there already exists a clientid4 for the same client,
Noveck, et al. Expires August 4, 2016 [Page 18]
Internet-Draft nfsv4-3530-migr-update February 2016
established using a different IP address. This causes difficulty
for a multi-homed client using the uniform client id string
approach.
Although this behavior is not correct, such servers still exist
and this specification should give clients guidance about dealing
with the situation, as well as making the correct behavior clear.
In order to support use of these sorts of servers, the client can use
different client id string approaches for different mounts, in order
to assure that,
o The uniform client id string approach is used when accessing
servers that may return NFS4ERR_MOVED and the client wishes to
enable transparent state migration.
o The non-uniform client id string approach is used when accessing
servers whose implementations make them incompatible with the
uniform client id string approach.
Since the client cannot easily determine which of the above are true,
implementations are likely to rely on user-specified mount options to
select the appropriate approach to use, in cases in which a client
supports simultaneous use of multiple approaches. Choice of a
default to use in such cases is up to the client implementation.
In the case in which the same server has multiple mounts, and both
approaches are specified for the same server, the client could have
multiple clientid4's corresponding to the same server, one for each
approach and would then have to keep these separate.
5.8. Trunking Determination when Using Uniform Client Id Strings
This section provides an example of how trunking determination could
be done by a client following the uniform client id string approach
(whether this is used for all mounts or not). Clients need not
follow this procedure but implementers should make sure that the
issues dealt with by this procedure are all properly addressed.
It is best to clarify here the various possible purposes of trunking
determination and the corresponding requirements as to server
behavior. The following points should be noted:
o The primary purpose of the trunking determination algorithm is to
make sure that, if the server treats client requests on two IP
addresses as part of the same client, the client will not be
surprised and encounter disconcerting server behavior, as
mentioned in Section 5.6. Such behavior could occur if the client
Noveck, et al. Expires August 4, 2016 [Page 19]
Internet-Draft nfsv4-3530-migr-update February 2016
were unaware that all of its client requests for the two IP
addresses were being handled as part of a single client talking to
a single server.
o A second purpose is to be able to use knowledge of trunking
relationships for better performance, etc.
o If a server were to give out distinct clientid4's in response to
receiving the same nfs_client_id4 on different network addresses,
and acted as if these were separate clients, the primary purpose
of trunking determination would be met, as long as the server did
not treat them as part of the same client. In this case, the
server would be acting, with regard to that client, as if it were
two distinct servers. This would interfere with the secondary
purpose of trunking determination but there is nothing the client
can do about that.
o Suppose a server were to give such a client two different
clientid4's but act as if they were one. That is the only way
that the server could behave in a way that would defeat the
primary purpose of the trunking determination algorithm.
Servers MUST NOT behave that way.
For a client using the uniform approach, clientid4 values are treated
as important information in determining server trunking patterns.
For two different IP addresses to return the same clientid4 value is
a necessary, though not a sufficient condition for them to be
considered as connected to the same server. As a result, when two
different IP addresses return the same clientid4, the client needs to
determine, using the procedure given below or otherwise, whether the
IP addresses are connected to the same server. For such clients, all
internal recording of clientid4 values needs to include, whether
explicitly or implicitly, identification of the server from which the
clientid4 was received so that one always has a (server, clientid4)
pair. Two such pairs from different servers are always considered
distinct even when the clientid4 values are the same, as they may
occasionally be.
In order to make this approach work, the client must have certain
information accessible for each nfs_client_id4 used by the uniform
approach (only one in general). The client needs to maintain a list
of all server IP addresses, together with the associated clientid4
values, SETCLIENTID principals and authentication flavors. As a part
of the associated data structures, there should be the ability to
mark a server IP structure as having the same server as another and
to mark an IP address as currently unresolved. One way to do this is
Noveck, et al. Expires August 4, 2016 [Page 20]
Internet-Draft nfsv4-3530-migr-update February 2016
to a allow each such entry to point to another with the pointer value
being one of:
o A pointer to another entry for an IP address associated with the
same server, where that IP address is the first one referenced to
access that server.
o A pointer to the current entry if there is no earlier IP address
associated with the same server, i.e., where the current IP
address is the first one referenced to access that server. The
text below refers to such an IP address as the lead IP address for
a given server.
o The value NULL if the address's server identity is currently
unresolved.
In order to keep the above information current, in the interests of
the most effective trunking determination, RENEWs should be
periodically done on each server. However, even if this is not done,
the primary purpose of the trunking determination algorithm, to
prevent confusion due to trunking hidden from the client, will be
achieved.
Given this apparatus, when a SETCLIENTID is done and a clientid4
returned, the data structure can be searched for a matching clientid4
and if such is found, further processing can be done to determine
whether the clientid4 match is accidental, or the result of trunking.
In this algorithm, when SETCLIENTID is done initially, it will use
the common nfs_client_id4 and specify the current target IP address
as callback.cb_location within the callback parameters. We call the
clientid4 and SETCLIENTID verifier returned by this operation XC and
XV.
This choice of callback parameters is provisional and reflects the
client's preferences in the event that the IP address is not trunked
with other IP addresses. The algorithm is constructed so that only
the appropriate callback parameters, reflecting observed trunking
patterns is actually confirmed.
Note that when the client has done previous SETCLIENTID's, to any IP
addresses, with more than one principal or authentication flavor, one
has the possibility of receiving NFS4ERR_CLID_INUSE, since it is not
yet knows which of the connections with existing IP addresses might
be trunked with the current one. In the event that the SETCLIENTID
fails with NFS4ERR_CLID_INUSE, one must try all other combinations of
principals and authentication flavors currently in use and eventually
one will be correct and not return NFS4ERR_CLID_INUSE.
Noveck, et al. Expires August 4, 2016 [Page 21]
Internet-Draft nfsv4-3530-migr-update February 2016
Note that at this point, no SETCLIENTID_CONFIRM has yet been done.
This is because the SETCLIENTID just done has either established a
new clientid4 on a previously unknown server or changed the callback
parameters on a clientid4 associated with some already known server.
Given it is undesirable to confirm something that should not happen,
what is to be done next depends on information about existing
clientid4's.
o If no matching clientid4 is found, the IP address X and clientid4
XC are added to the list and considered as having no existing
known IP addresses trunked with it. The IP address is marked as a
lead IP address for a new server. A SETCLIENTID_CONFIRM is done
using XC and XV.
o If a matching clientid4 is found which is marked unresolved,
processing on the new IP address is suspended. In order to
simplify processing, there can only be one unresolved IP address
for any given clientid4.
o If one or more matching clientid4's is found, none of which is
marked unresolved, the new IP address X is entered and marked
unresolved. A SETCLIENTID_CONFIRM is done to X using XC and XV.
After applying the steps below to each of the lead IP addresses
with a matching clientid4, the address will have been resolved: It
may have been determined to be part of an already known server as
a new IP address to be added to an existing set of IP addresses
for that server. Otherwise, it will be recognized as a new
server. At the point at which this determination is made, the
unresolved indication is cleared and any suspended SETCLIENTID
processing is restarted
For each lead IP address IPn with a clientid4 matching XC, the
following steps are done. Because the RPC to do a SETCLIENTID could
take considerable time, it is desirable for the client to perform
these operations in parallel. Note that because the clientid4 is a
64-bit value, the number of such IP addresses that would need to be
tested is expected to be quite small, even when the client is
interacting with many NFSv4.0 servers. Thus, while parallel
processing is desirable, it is not necessary.
o If the principal for IPn does not match that for X, the IP address
is skipped, since it is impossible for IPn and X to be trunked in
these circumstances. If the principal does match but the
authentication flavor does not, the authentication flavor already
used should be used for address X as well. This will avoid any
possibility that NFS4ERR_CLID_INUSE will be returned for the
Noveck, et al. Expires August 4, 2016 [Page 22]
Internet-Draft nfsv4-3530-migr-update February 2016
SETCLIENTID and SETCLIENTID_CONFIRM to be done below, as long as
the server(s) at IP addresses IPn and X are correctly implemented.
o A SETCLIENTID is done to update the callback parameters to reflect
the possibility that X will be marked as associated with the
server whose lead IP address is IPn. The specific callback
parameters chosen, in terms of cb_client4 and callback_ident, are
up to the client and should reflect its preferences as to callback
handling for the common clientid4, in the event that X and IPn are
trunked together. When a SETCLIENTID is done on IP address IPn, a
setclientid_confirm value (in the form of a verifier4) is
returned, which will be referred to as SCn.
Note that the NFSv4.0 specification requires the server to make
sure that such verifiers are very unlikely to be regenerated.
Given that it is already highly unlikely that the clientid4 XC is
duplicated by distinct servers, the probability that SCn is
duplicated as well has to be considered vanishingly small. Note
also that the callback update procedure can be repeated multiple
times to reduce the probability of spurious matches further.
o The setclientid_confirm value SCn is saved for later use in
confirming the SETCLIENTID done to IPn.
Once the SCn values are gathered up by the procedure above, they are
each tested by being used as the verifier for a SETCLIENTID_CONFIRM
operation directed to the original IP address X, whose trunking
relationships are to be determined. These RPC operations may be done
in parallel.
There are a number of things that should be noted at this point.
o That the SETCLIENTID operations done on the various IPn addresses
in the procedure above will never be confirmed by
SETCLIENTID_CONFIRM operations directed to the various IPn
addresses. If these callback updates are to be confirmed, they
will be confirmed by SETCLIENTID_CONFIRM operations directed at
the original IP address X, which can only happen if SCn was
generated by an IPn which was trunked with X, allowing the
SETCLIENTID to be successfully confirmed, and allowing us to infer
the existence of that trunking relationship.
o That the number of successful SETCLIENTID_CONFIRM operations done
should never be more than one. If both SCn and SCm are accepted
by X, then it indicates that both IPn and IPm are trunked with X,
but that is only possible if IPn and IPm are trunked together.
Since these two addresses were earlier recognized as not trunked
Noveck, et al. Expires August 4, 2016 [Page 23]
Internet-Draft nfsv4-3530-migr-update February 2016
together, this should be impossible, if the servers in question
are implemented correctly.
Further processing depends on the success or failure of the various
SETCLIENTD_CONFIRM operations done in the step above.
o If the setclientid_confirm value generated by a particular IPn is
accepted on X then X and IPn are recognized as connected to the
same server and the entry for X is marked as associated with IPn.
o If none of the confirm operations are accepted, then X is
recognized as a distinct server. Its callback parameters will
remain as the ones established by the original SETCLIENTID.
In either of the cases, the entry is considered resolved and
processing can be restarted for IP addresses whose clientid4 matched
XC but whose resolution had been deferred.
The procedure described above must be performed so as to exclude the
possibility that multiple SETCLIENTID's, done to different server IP
addresses and returning the same clientid4 might "race" in such a
fashion that there is no explicit determination of whether they
correspond to the same server. The following possibilities for
serialization are all valid and implementers may choose among them
based on a tradeoff between performance and complexity. They are
listed in order of increasing parallelism:
o An NFSv4.0 client might serialize all instances of SETCLIENTID/
SETCLIENTID_CONFIRM processing, either directly or by serializing
mount operations involving use of NFSv4.0. While doing so will
prevent the races mentioned above, this degree of serialization
can cause performance issues when there is a high volume of mount
operations.
o One might instead serialize the period of processing that begins
when the clientid4 received from the server is processed and ends
when all trunking determination for that server is completed.
This prevents the races mentioned above, without adding to delay
except when trunking determination is common.
o One might avoid much of the serialization implied above, by
allowing trunking determination for distinct clientid4 values to
happen in parallel, with serialization of trunking determination
happening independently for each distinct clientid4 value.
The procedure above has made no explicit mention of the possibility
that server reboot can occur at any time. To address this
Noveck, et al. Expires August 4, 2016 [Page 24]
Internet-Draft nfsv4-3530-migr-update February 2016
possibility the client should make sure the following steps are
taken:
o When a SETCLIENTID_CONFIRM is rejected by a given IPn, the client
should be aware of the possibility that the rejection is due to XC
(rather than XV) being invalid. This situation can be addressed
by doing a RENEW specifying XC directed to the IP address X. If
that operation succeeds, then the rejection is to be acted on
normally since either XV is invalid on IPn or XC has become
invalid on IPn while it is valid on X, showing that IPn and X are
not trunked. If, on the other hand, XC is not valid on X, then
the trunking detection process should be restarted once a new
client ID is established on X.
o In the event of a reboot detected on any server lead IP, the set
of IP addresses associated with the server should not change and
state should be re-established for the lease as a whole, using all
available connected server IP addresses. It is prudent to verify
connectivity by doing a RENEW using the new clientid4 on each such
server address before using it, however.
Another situation not discussed explicitly above is the possibility
that a SETCLIENTID done to one of the IPn addresses might take so
long that it is necessary to time out the operation, to prevent
unacceptably delaying the MOUNT operation. One simple possibility is
to simply fail the MOUNT at this point. Because the average number
of IP addresses that might have to be tested is quite small, this
will not greatly increase the probability of MOUNT failure. Other
possible approaches are:
o If the IPn has sufficient state in existence, the existing
stateids and sequence values might be validated by being used on
IP address X. In the event of success, X and IPn should be
considered trunked together.
What constitutes "sufficient" state in this context is an
implementation decision which is affected by the implementer's
willingness to fail the MOUNT in an uncertain case, and the
strength of the state verification procedure implemented.
o If IPn has no locking state in existence, X could be recorded as a
lead IP address on a provisional basis, subject to trunking being
tested again, once IPn starts becoming responsive. To avoid
confusion between IPn and X, and the need to merge distinct state
corpora for X and IPn at a later point, this retest of trunking
should occur after RENEWs on IPn are responded to and before
establishing any new state for either IPn as a separate server or
for IPn considered as a server address trunked with X.
Noveck, et al. Expires August 4, 2016 [Page 25]
Internet-Draft nfsv4-3530-migr-update February 2016
o The client locking-related code could be made more tolerant of
what would otherwise be considered anomalous results due to an
unrecognized trunking relationship. The client could use the
appearance of behavior explainable by a previously unknown
trunking relationship as the cue to consider the addresses as
trunked.
This choice has a lot of complexity associated with it, and it is
likely that few implementations will use it. When the set of
locking state on IPn is small (e.g., a single stateid) but not
empty, most client implementations are likely to either fail the
MOUNT or implement a more stringent verification procedure using
the existing stateid on IPn as a basis to generate further state
as raw material for the trunking verification process.
5.9. Client Id String Construction Details
This section gives more detailed guidance on client id string
construction. The guidance in this section will cover cases in which
either the uniform or the non-uniform approach to the client id
string is used.
Note that among the items suggested for inclusion, there are many
that may conceivably change. In order for the client id string to
remain valid in such circumstances, the client SHOULD either:
o Use a saved copy of such value, rather than the changeable value
itself.
o Save the constructed client id string, rather than constructing it
anew at SETCLIENTID time, based on unchangeable parameters and
saved copies of changeable data items.
A file is not always a valid choice to store such information, given
the existence of diskless clients. In such situations, whatever
facilities exist for a client to store configuration information such
as boot arguments should be used.
Given the considerations listed in Section 5.2.1, an id string would
be one that includes as its basis:
o An identifier uniquely associated with the node on which the
client is running.
o For a user level NFSv4.0 client, it should contain additional
information to distinguish the client from a kernel-based client
and from other user-level clients running on the same node, such
as a universally unique identifier (UUID).
Noveck, et al. Expires August 4, 2016 [Page 26]
Internet-Draft nfsv4-3530-migr-update February 2016
o Where the non-uniform approach is to be used, the IP address of
the server.
o Additional information that tends to be unique, such as one or
more of:
* The timestamp of when the NFSv4 software was first installed on
the client (though this is subject to the previously mentioned
caution about using information that is stored in a file,
because the file might only be accessible over NFSv4).
* A true random number, generally established once and saved.
With regard to the identifier associated with the node on which the
client is running, the following possibilities are likely candidates.
o The client machine's serial number.
o The client's IP address. Note that this SHOULD be treated as a
changeable value.
o A MAC address. Note that this also should be considered a
changeable value because of the possibility of configuration
changes.
Privacy concerns may be an issue if some of the items above (e.g.,
machine serial number, MAC address) are used. When it is necessary
to use such items to ensure uniqueness, application of a one-way hash
function is desirable. When the non-uniform approach is used, that
hash function should be applied to all of the components chosen as a
unit rather that to particular individual elements.
6. Locking and Multi-Server Namespace
This chapter contains a replacement for section 9.14, "Migration,
Replication, and State", in [RFC7530].
The replacement is in Section 6.1 and supersedes the replaced
section.
The changes made can be briefly summarized as follows:
o Adding text to address the case of stateid conflict on migration.
o Specifying that when leases are moved, as a result of file system
migration, they are to be merged with leases on the destination
server that are connected to the same client.
Noveck, et al. Expires August 4, 2016 [Page 27]
Internet-Draft nfsv4-3530-migr-update February 2016
o Adding text that deals with the case of a clientid4 being changed
on state transfer as a result of conflict with an existing
clientid4.
o Adding a section describing how information associated with open-
owners and lock-owners is to be managed with regard to migration.
o The description of handling of the NFS4ERR_LEASE_MOVED has been
rewritten for greater clarity.
6.1. Lock State and File System Transitions
File systems may transition to a different server in several
circumstances:
o Responsibility for handling a given file system is transferred to
a new server via migration.
o A client may choose to use an alternate server (e.g., in response
to server unresponsiveness) in the context of file system
replication.
In such cases, the appropriate handling of state shared between the
client and server (i.e., locks, leases, stateids, and client IDs) is
as described below. The handling differs between migration and
replication.
If a server replica or a server immigrating a file system agrees to,
or is expected to, accept opaque values from the client that
originated from another server, then it is a wise implementation
practice for the servers to encode the "opaque" values in network
byte order (i.e., in a big-endian format). When doing so, servers
acting as replicas or immigrating file systems will be able to parse
values like stateids, directory cookies, filehandles, etc. even if
their native byte order is different from that of other servers
cooperating in the replication and migration of the file system.
6.1.1. Migration and State
In the case of migration, the servers involved in the migration of a
file system should transfer all server state associated with the
migrating file system from source to the destination server. If
state is transferred, this MUST be done in a way that is transparent
to the client. This state transfer will ease the client's transition
when a file system migration occurs. If the servers are successful
in transferring all state, the client will continue to use stateids
assigned by the original server. Therefore the new server must
Noveck, et al. Expires August 4, 2016 [Page 28]
Internet-Draft nfsv4-3530-migr-update February 2016
recognize these stateids as valid and treat them as representing the
same locks as they did on the source server.
In this context, the phrase "the same locks" means:
o That they are associated with the same file
o That they represent the same types of locks, whether opens,
delegations, advisory byte-range locks, or mandatory byte-range
locks.
o That they have the same lock particulars, including such things as
access modes, deny modes, and byte ranges.
o That they are associated with the same owner string(s).
If transferring stateids from server to server would result in a
conflict for an existing stateid for the destination server with the
existing client, transparent state migration MUST NOT happen for that
client. Servers participating in using transparent state migration
should co-ordinate their stateid assignment policies to make this
situation unlikely or impossible. The means by which this might be
done, like all of the inter-server interactions for migration, are
not specified by the NFS version 4.0 protocol (either in [RFC7530] or
this update).
A client may determine the disposition of migrated state by using a
stateid associated with the migrated state on the new server.
o If the stateid is not valid and an error NFS4ERR_BAD_STATEID is
received, either transparent state migration has not occurred or
the state was purged due to a mismatch in the verifier (i.e., the
boot instance id).
o If the stateid is valid, transparent state migration has occurred.
Since responsibility for an entire file system is transferred with a
migration event, there is no possibility that conflicts will arise on
the destination server as a result of the transfer of locks.
The servers may choose not to transfer the state information upon
migration. However, this choice is discouraged, except where
specific issues such as stateid conflicts make it necessary. When a
server implements migration and it does not transfer state
information, it MUST provide a file-system-specific grace period, to
allow clients to reclaim locks associated with files in the migrated
file system. If it did not do so, clients would have to re-obtain
locks, with no assurance that a conflicting lock was not granted
Noveck, et al. Expires August 4, 2016 [Page 29]
Internet-Draft nfsv4-3530-migr-update February 2016
after the file system was migrated and before the lock was re-
obtained.
In the case of migration without state transfer, when the client
presents state information from the original server (e.g., in a RENEW
op or a READ op of zero length), the client must be prepared to
receive either NFS4ERR_STALE_CLIENTID or NFS4ERR_BAD_STATEID from the
new server. The client should then recover its state information as
it normally would in response to a server failure. The new server
must take care to allow for the recovery of state information as it
would in the event of server restart.
In those situations in which state has not been transferred, as shown
by a return of NFS4ERR_BAD_STATEID, the client may attempt to reclaim
locks in order to take advantage of cases in which the destination
server has set up a file-system-specific grace period in support of
the migration.
6.1.1.1. Migration and Client IDs
Handling of clientid4 values is similar to that for stateids.
However, there are some differences that derive from the fact that a
clientid4 is an object which spans multiple file systems while a
stateid is inherently limited to a single file system.
The clientid4 and nfs_client_id4 information (id string and boot
instance id) will be transferred with the rest of the state
information and the destination server should use that information to
determine appropriate clientid4 handling. Although the destination
server may make state stored under an existing lease available under
the clientid4 used on the source server, the client should not assume
that this is always so. In particular,
o If there is an existing lease with an nfs_client_id4 that matches
a migrated lease (same id string and verifier), the server SHOULD
merge the two, making the union of the sets of stateids available
under the clientid4 for the existing lease. As part of the lease
merger, the expiration time of the lease will reflect renewal done
within either of the ancestor leases (and so will reflect the
latest of the renewals).
o If there is an existing lease with an nfs_client_id4 that
partially matches a migrated lease (same id string and a different
(boot) verifier), the server MUST eliminate one of the two,
possibly invalidating one of the ancestor clientid4's. Since boot
instance id's are not ordered, the later lease renewal time will
prevail.
Noveck, et al. Expires August 4, 2016 [Page 30]
Internet-Draft nfsv4-3530-migr-update February 2016
o If the destination server already has the transferred clientid4 in
use for another purpose, it is free to substitute a different
clientid4 and associate that with the transferred nfs_client_id4.
When leases are not merged, the transfer of state should result in
creation of a confirmed client record with empty callback information
but matching the {v, x, c} with v and x derived from the transferred
client information and c chosen by the destination server. For a
description of this notation, see Section 8.4.5
In such cases, the client SHOULD re-establish new callback
information with the new server as soon as possible, according to
sequences described in sections "Operation 35: SETCLIENTID -
Negotiate Client ID" and "Operation 36: SETCLIENTID_CONFIRM - Confirm
Client ID". This ensures that server operations are not delayed due
to an inability to recall delegations. The client can determine the
new clientid4 (the value c) from the response to SETCLIENTID.
The client can use its own information about leases with the
destination server to see if lease merger should have happened. When
there is any ambiguity, the client MAY use the above procedure to set
the proper callback information and find out, as part of the process,
the correct value of its clientid4 with respect to the server in
question.
6.1.1.2. Migration and State Owner Information
In addition to stateids, the locks they represent, and client
identity information, servers also need to transfer information
related to the current status of open-owners and lock-owners.
This information includes:
o The sequence number of the last operation associated with the
particular owner.
o Information regarding the results of the last operation,
sufficient to allow reissued operations to be correctly responded
to.
When individual open-owners and lock-owners have only been used in
connection with a particular file system, the server SHOULD transfer
this information together with the lock state. The owner ceases to
exist on the source server and is reconstituted on the destination
server. This will happen in the case of clients which have been
written to isolate each owner to a specific filesystem, but may
happen for other clients as well.
Noveck, et al. Expires August 4, 2016 [Page 31]
Internet-Draft nfsv4-3530-migr-update February 2016
Note that when servers take this approach for all owners whose state
is limited to the particular file system being migrated, doing so
will not cause difficulties for clients not adhering to an approach
in which owners are isolated to particular file systems. As long as
the client recognizes the loss of transferred state, the protocol
allows the owner in question to disappear and the client may have to
deal with an owner confirmation request that would not have occurred
in the absence of the migration.
When migration occurs and the source server discovers an owner whose
state includes the migrated file system but other file systems as
well, it cannot transfer the associated owner state. Instead, the
existing owner state stays in place but propagation of owner state is
done as specified below
o When the current seqid for an owner represents an operation
associated with the file system being migrated, owner status
SHOULD be propagated to the destination file system.
o When the current seqid for an owner does not represent an
operation associated with the file system being migrated, owner
status MAY be propagated to the destination file system.
o When the owner in question has never been used for an operation
involving the migrated file system, the owner information SHOULD
NOT be propagated to the destination file system.
Note that a server may obey all of the conditions above without the
overhead of keeping track of set of file systems that any particular
owner has been associated with. Consider a situation in which the
source server has decided to keep lock-related state associated with
a file system fixed, preparatory to propagating it to the destination
file system. If a client is free to create new locks associated with
existing owners on other file systems, the owner information may be
propagated to the destination file system, even though, at the time
the file system migration is recognized by the client to have
occurred, the last operation associated with the owner may not be
associated with the migrating file system.
When a source server propagates owner-related state associated with
owners that span multiple file systems, it will propagate the owner
sequence value to the destination server, while retaining it on the
source server, as long as there exists state associated with the
owner. When owner information is propagated in this way, source and
destination servers start with the same owner sequence value which is
then updated independently, as the client makes owner-related
requests to the servers. Note that each server will have some period
in which the associated sequence value for an owner is identical to
Noveck, et al. Expires August 4, 2016 [Page 32]
Internet-Draft nfsv4-3530-migr-update February 2016
the one transferred as part of migration. At those times, when a
server receives a request with a matching owner sequence value, it
MUST NOT respond with the associated stored response if the
associated file system is not, when the reissued request is received,
part of the set of file systems handled by that server.
One sort of case may require more complex handling. When multiple
file system are migrated, in sequence, to a specific destination
server, an owner may be migrated to a destination server, on which it
was already present, leading to the issue of how the resident owner
information and that being newly migrated are to be reconciled.
If file system migration encounters a situation where owner
information needs to be merged, it MAY decline to transfer such
state, even if it chooses to handle other cases in which locks for a
given owner are spread among multiple file systems.
As a way of understanding the situations which need to be addressed
when owner information needs to be merged, consider the following
scenario:
o There is client C and two servers X and Y. There are two
clientid4's designating C, which are referred to as CX and CY.
o Initially server X supports file systems F1, F2, F3, and F4.
These will be migrated, one-at-a-time, to server Y.
o While these migrations are proceeding, the client makes locking
requests for file system F1 through F4 on behalf of owner O
(either a lock-owner or an open-owner), with each request going to
X or Y depending on where the relevant file system is being
supported at the time the request is made.
o Once the first migration event occurs, client C will maintain two
instances for owner O, one for each server.
o It is always possible that C may make a request of server X
relating to owner O, and before receiving a response, find the
target file system has moved to Y, and need to re-issue the
request to server Y.
o At the same time, C may make a request of server Y relating to
owner O, and this too may encounter a lost-response situation.
As a result of such merger situations, the server will need to
provide support for dealing with retransmission of owner-sequenced
requests that diverges from the typical model in which there is
support for retransmission of replies only for a request whose
Noveck, et al. Expires August 4, 2016 [Page 33]
Internet-Draft nfsv4-3530-migr-update February 2016
sequence value exactly matches the last one sent. In some
situations, there may be two requests, each of which had the last
sequence when it was issued. As a result of migration and owner
merger, one of those will no longer be the last by sequence.
When servers do support such merger of owner information on the
destination server, the following rules are to be adhered to:
o When an owner sequence value is propagated to a destination server
where it already exists, the resulting sequence value is to be the
greater of the one present on the destination server and the one
being propagated as part of migration.
o In the event that an owner sequence value on a server represents a
request applying to a file system currently present on the server,
it is not to be rendered invalid simply because that sequence
value is changed as a result of owner information propagation as
part of file system migration. Instead, it is retained until it
can be deduced that the client in question has received the reply.
As a result of the operation of these rules, there are three ways in
which there can be more reply data than what is typically present,
i.e., data for a single request per owner whose sequence is the last
one received, where the next sequence to be used is one beyond that.
o When the owner sequence value for a migrating file system is
greater than the corresponding value on the destination server,
the last request for the owner in effect at the destination server
needs to be retained, even though it is no longer one less the
next sequence to be received.
o When the owner sequence value for a migrating file system is less
than the corresponding value on the destination server the
sequence number for last request for the owner in effect on the
migrating file system needs to be retained, even though it is no
longer one than less the next sequence to be received.
o When the owner sequence value for a migrating file system is equal
to the corresponding value on the destination server, one has two
different "last" requests which both must be retained. The next
sequence value to be used is one beyond the sequence value shared
by these two requests.
Here are some guidelines as to when servers can drop such additional
reply data which is created as part of owner information migration.
o The server SHOULD NOT drop this information simply because it
receives a new sequence value for the owner in question, since
Noveck, et al. Expires August 4, 2016 [Page 34]
Internet-Draft nfsv4-3530-migr-update February 2016
that request may have been issued before the client was aware of
the migration event.
o The server SHOULD drop this information if it receives a new
sequence value for the owner in question and the request relates
to the same file system.
o The server SHOULD drop the part of this information that relates
to non-migrated file systems, if it receives a new sequence value
for the owner in question and the request relates to a non-
migrated file system.
o The server MAY drop this information when it receives a new
sequence value for the owner in question a considerable period of
time (more than one or two lease periods) after the migration
occurs.
6.1.2. Replication and State
Since client switch-over in the case of replication is not under
server control, the handling of state is different. In this case,
leases, stateids and client IDs do not have validity across a
transition from one server to another. The client must re-establish
its locks on the new server. This can be compared to the re-
establishment of locks by means of reclaim-type requests after a
server reboot. The difference is that the server has no provision to
distinguish requests reclaiming locks from those obtaining new locks
or to defer the latter. Thus, a client re-establishing a lock on the
new server (by means of a LOCK or OPEN request), may have the
requests denied due to a conflicting lock. Since replication is
intended for read-only use of file systems, such denial of locks
should not pose large difficulties in practice. When an attempt to
re-establish a lock on a new server is denied, the client should
treat the situation as if its original lock had been revoked.
6.1.3. Notification of Migrated Lease
A file system can be migrated to another server while a client that
has state related to that file system is not actively submitting
requests to it. In this case, the migration is reported to the
client during lease renewal. Lease renewal can occur either
explicitly via a RENEW operation, or implicitly when the client
performs a lease-renewing operation on another file system on that
server.
In order for the client to schedule renewal of leases that may have
been relocated to the new server, the client must find out about
lease relocation before those leases expire. Similarly, when
Noveck, et al. Expires August 4, 2016 [Page 35]
Internet-Draft nfsv4-3530-migr-update February 2016
migration occurs but there has not been transparent state migration,
the client needs to find out about the change soon enough to be able
to reclaim the lock within the destination server's grace period. To
accomplish this, all operations which implicitly renew leases for a
client (such as OPEN, CLOSE, READ, WRITE, RENEW, LOCK, and others),
will return the error NFS4ERR_LEASE_MOVED if responsibility for any
of the leases to be renewed has been transferred to a new server.
Note that when the transfer of responsibility leaves remaining state
for that lease on the source server, the lease is renewed just as it
would have been in the NFS4ERR_OK case, despite returning the error.
The transfer of responsibility happens when the server receives a
GETATTR(fs_locations) from the client for each file system for which
a lease has been moved to a new server. Normally it does this after
receiving an NFS4ERR_MOVED for an access to the file system but the
server is not required to verify that this happens in order to
terminate the return of NFS4ERR_LEASE_MOVED. By convention, the
compounds containing GETATTR(fs_locations) SHOULD include an appended
RENEW operation to permit the server to identify the client getting
the information.
Note that the NFS4ERR_LEASE_MOVED error is only required when
responsibility for at least one stateid has been affected. In the
case of a null lease, where the only associated state is a clientid4,
an NFS4ERR_LEASE_MOVED error SHOULD NOT be generated.
Upon receiving the NFS4ERR_LEASE_MOVED error, a client that supports
file system migration MUST perform the necessary GETATTR operation
for each of the file systems containing state that have been migrated
and so give the server evidence that it is aware of the migration of
the file system. Once the client has done this for all migrated file
systems on which the client holds state, the server MUST resume
normal handling of stateful requests from that client.
One way in which clients can do this efficiently in the presence of
large numbers of file systems is described below. This approach
divides the process into two phases, one devoted to finding the
migrated file systems and the second devoted to doing the necessary
GETATTRs.
The client can find the migrated file systems by building and issuing
one or more COMPOUND requests, each consisting of a set of PUTFH/
GETFH pairs, each pair using a filehandle in one of the file systems
in question. All such COMPOUND requests can be done in parallel.
The successful completion of such a request indicates that none of
the file systems interrogated have been migrated while termination
with NFS4ERR_MOVED indicates that the file system getting the error
has migrated while those interrogated before it in the same COMPOUND
have not. Those whose interrogation follows the error remain in an
Noveck, et al. Expires August 4, 2016 [Page 36]
Internet-Draft nfsv4-3530-migr-update February 2016
uncertain state and can be interrogated by restarting the requests
from after the point at which NFS4ERR_MOVED was returned or by
issuing a new set of COMPOUND requests for the file systems which
remain in an uncertain state.
Once the migrated file systems have been found, all that is needed is
for the client to give evidence to the server that it is aware of the
migrated status of file systems found by this process, by
interrogating the fs_locations attribute for a filehandle within each
of the migrated file systems. The client can do this by building and
issuing one or more COMPOUND requests, each of which consists of a
set of PUTFH operations, each followed by a GETATTR of the
fs_locations attribute. A RENEW is necessary to enable the
operations to be associated with the lease returning
NFS4ERR_LEASE_MOVED. Once the client has done this for all migrated
file systems on which the client holds state, the server will resume
normal handling of stateful requests from that client.
In order to support legacy clients that do not handle the
NFS4ERR_LEASE_MOVED error correctly, the server SHOULD time out after
a wait of at least two lease periods, at which time it will resume
normal handling of stateful requests from all clients. If a client
attempts to access the migrated files, the server MUST reply
NFS4ERR_MOVED. In this situation, it is likely that the client would
find its lease expired although a server may use "courtesy" locks (as
described in Section 9.6.3.1 of [RFC7530]) to mitigate the issue.
When the client receives an NFS4ERR_MOVED error, the client can
follow the normal process to obtain the destination server
information (through the fs_locations attribute) and perform renewal
of those leases on the new server. If the server has not had state
transferred to it transparently, the client will receive either
NFS4ERR_STALE_CLIENTID or NFS4ERR_STALE_STATEID from the new server,
as described above. The client can then recover state information as
it does in the event of server failure.
Aside from recovering from a migration, there are other reasons a
client may wish to retrieve fs_locations information from a server.
When a server becomes unresponsive, for example, a client may use
cached fs_locations data to discover an alternate server hosting the
same file system data. A client may periodically request
fs_locations data from a server in order to keep its cache of
fs_locations data fresh.
Since a GETATTR(fs_locations) operation would be used for refreshing
cached fs_locations data, a server could mistake such a request as
indicating recognition of an NFS4ERR_LEASE_MOVED condition.
Therefore a compound which is not intended to signal that a client
Noveck, et al. Expires August 4, 2016 [Page 37]
Internet-Draft nfsv4-3530-migr-update February 2016
has recognized a migrated lease SHOULD be prefixed with a guard
operation which fails with NFS4ERR_MOVED if the file handle being
queried is no longer present on the server. The guard can be as
simple as a GETFH operation.
Though unlikely, it is possible that the target of such a compound
could be migrated in the time after the guard operation is executed
on the server but before the GETATTR(fs_locations) operation is
encountered. When a client issues a GETATTR(fs_locations) operation
as part of a compound not intended to signal recognition of a
migrated lease, it SHOULD be prepared to process fs_locations data in
the reply that shows the current location of the file system is gone.
6.1.4. Migration and the Lease_time Attribute
In order that the client may appropriately manage its leases in the
case of migration, the destination server must establish proper
values for the lease_time attribute.
When state is transferred transparently, that state should include
the correct value of the lease_time attribute. The lease_time
attribute on the destination server must never be less than that on
the source since this would result in premature expiration of leases
granted by the source server. Upon migration in which state is
transferred transparently, the client is under no obligation to re-
fetch the lease_time attribute and may continue to use the value
previously fetched (on the source server).
In the case in which lease merger occurs as part of state transfer,
the lease_time attribute of the destination lease remains in effect.
The client can simply renew that lease with its existing lease_time
attribute. State in the source lease is renewed at the time of
transfer so that it cannot expire, as long as the destination lease
is appropriately renewed.
If state has not been transferred transparently (i.e., the client
needs to reclaim or re-obtain its locks), the client should fetch the
value of lease_time on the new (i.e., destination) server, and use it
for subsequent locking requests. However the server must respect a
grace period at least as long as the lease_time on the source server,
in order to ensure that clients have ample time to reclaim their
locks before potentially conflicting non-reclaimed locks are granted.
The means by which the new server obtains the value of lease_time on
the old server is left to the server implementations. It is not
specified by the NFS version 4.0 protocol.
Noveck, et al. Expires August 4, 2016 [Page 38]
Internet-Draft nfsv4-3530-migr-update February 2016
7. Server Implementation Considerations
This chapter provides suggestions to help server implementers deal
with issues involved in the transparent transfer of file system-
related data between servers. Servers are not obliged to follow
these suggestions, but should be sure that their approach to the
issues handle all the potential problems addressed below.
7.1. Relation of Locking State Transfer to Other Aspects of File System
Motion
In many cases, state transfer will be part of a larger function
wherein the contents of a file system are transferred from server to
server. Although specifics will vary with the implementation, the
relation between the transfer of persistent file data and metadata
and the transfer of state will typically be described by one of the
cases below.
o In some implementations, access to the on-disk contents of a file
system can be transferred from server to server by making the
storage devices on which the file system resides physically
accessible from multiple servers, and transferring the right and
responsibility for handling that file system from server to
server.
In such implementations, the transfer of locking state happens on
its own, as described in Section 7.2. The transfer of physical
access to the file system happens after the locking state is
transferred and before any subsequent access to the file system.
In cases where such transfer is not instantaneous, there will be a
period in which all operations on the file system are held off,
either by having the operations themselves return NFS4ERR_DELAY,
or, where this is not allowed, by using the techniques described
below in Section 7.2.
o In other implementations, file system data and metadata must be
copied from the server where it has existed to the destination
server. Because of the typical amounts of data involved, it is
generally not practical to hold off access to the file system
while this transfer is going on. Normal access to the file
system, including modifying operations, will generally happen
while the transfer is going on.
Eventually the file system copying process will complete. At this
point, there will be two valid copies of the file system, one on
each of the source and destination servers. Servers may maintain
that state of affairs by making sure that each modification to
Noveck, et al. Expires August 4, 2016 [Page 39]
Internet-Draft nfsv4-3530-migr-update February 2016
file system data is done on both the source and destination
servers.
Although the transfer of locking state can begin before the above
state of affairs is reached, servers will often wait until it is
arrived at to begin transfer of locking state. Once the transfer
of locking state is completed, as described in the section below,
clients may be notified of the migration event and access the
destination file system on the destination server.
o Another case in which file system data and metadata must be copied
from server to server involves a variant of the pattern above. In
cases in which a single file system moves between or among a small
set of servers, it will transition to a server on which a previous
instantiation of that same file system existed before. In such
cases, it is often more efficient to update the previous file
system instance to reflect changes made while the active file
system was residing elsewhere, rather than copying the file system
data anew.
In such cases, the copying of file system data and metadata is
replaced by a process which validates each visible file system
object, copying new objects and updating those that have changed
since the file system was last present on the destination server.
Although this process is generally shorter than a complete copy,
it is generally long enough that it is not practical to hold off
access to the file system while this update is going on.
Eventually the file system updating process will complete. At
this point, there will be two valid copies of the file system, one
on each of the source and destination servers. Servers may
maintain that state of affairs just as is done in the previous
case. Similarly, the transfer of locking state, once it is
complete, allows the clients to be notified of the migration event
and access the destination file system on the destination server.
7.2. Preventing Locking State Modification During Transfer
When transferring locking state from the source to a destination
server, there will be occasions when the source server will need to
prevent operations that modify the state being transferred. For
example, if the locking state at time T is sent to the destination
server, any state change that occurs on the source server after that
time but before the file system transfer is made effective will mean
that the state on the destination server will differ from that on the
source server, which matches what the client would expect to see.
Noveck, et al. Expires August 4, 2016 [Page 40]
Internet-Draft nfsv4-3530-migr-update February 2016
In general, a server can prevent some set of server-maintained data
from changing by returning NFS4ERR_DELAY on operations which attempt
to change that data. In the case of locking state for NFSv4.0, there
are two specific issues that might interfere:
o Returning NFS4ERR_DELAY will not prevent state from changing in
that owner-based sequence values will still change, even though
NFS4ERR_DELAY is returned. For example OPEN and LOCK will change
state (in the form of owner seqid values) even when they return
NFS4ERR_DELAY.
o Some operations which modify locking state are not allowed to
return NFS4ERR_DELAY (i.e., OPEN_CONFIRM, RELEASE_LOCKOWNER, and
RENEW)
Note that the first problem and most instances of the second can be
addressed by returning NFS4ERR_DELAY on the operations that establish
a filehandle within the target as one of the filehandles associated
with the request, i.e., as either the current or saved filehandle.
This would require returning NFS4ERR_DELAY under the following
circumstances:
o On a PUTFH that specifies a filehandle within the target file
system.
o On a LOOKUP or LOOKUPP that crosses into the target file system.
As a result of doing this, OPEN_CONFIRM is dealt with, leaving only
RELEASE_LOCKOWNER and RENEW still to be dealt with.
Note that if the server establishes and maintains a situation in
which no request has, as either the current or saved filehandle, a
filehandle within the target file system, no special handling of
SAVEFH or RESTOREFH is required. Thus the fact that these operations
cannot return NFS4ERR_DELAY is not a problem since neither will
establish a filehandle in the target file system as the current
filehandle.
If the server is to establish the situation described above, it may
have to take special note of long-running requests which started
before state migration. Part of any solution to this issue will
involve distinguishing two separate points in time at which handling
for the target file system will change. Let us distinguish;
o A time T after which the previously mentioned operations will
return NFS4ERR_DELAY.
Noveck, et al. Expires August 4, 2016 [Page 41]
Internet-Draft nfsv4-3530-migr-update February 2016
o A later time T' at which the server can consider file system
locking state fixed, making it possible for it to be sent to the
destination server.
For a server to decide on T', it must ensure that requests started
before T, cannot change target file system locking state, given that
all those started after T are dealt with by returning NFS4ERR_DELAY
upon setting filehandles within the target file system. Among the
ways of doing this are:
o Keeping track of the earliest request started which is still in
execution (for example, by keeping a list of active requests
ordered by request start time). Requests that started before and
are still in progress at time T may potentially affect the locking
state; once the starting time of the earliest-started active
request is later than T, the starting time of the first such
request can be chosen as T' by the server since any request in
progress after T' started after time T. Accordingly it would not
have been allowed to change locking state for the migrating file
system and would have returned NFS4ERR_DELAY had it tried to make
a change.
o Keeping track of the count of requests, started before time T
which have a filehandle within the target file system as either
the current or saved filehandle. The server can then define T' to
be the first time after T at which the count is zero.
The set of operations that change locking state include two that
cannot be dealt with by the above approach, because they are not
specific to a particular file system and do not use a current
filehandle as an implicit parameter.
o RENEW can be dealt with by applying the renewal to state for non-
transitioning file systems. The effect of renewal for the
transitioning file system can be ignored, as long as the servers
make sure that the lease on the destination server has an
expiration time that is no earlier than the latest renewal done on
the source server. This can be easily accomplished by making the
lease expiration on the destination server equal to the time the
state transfer was completed plus the lease period.
o RELEASE_LOCKOWNER can be handled by propagating the fact of the
lock-owner deletion (e.g., by using an RPC) to the destination
server. Such a propagation RPC can be done as part of the
operation or the existence of the deletion can be recorded locally
and propagation of owner deletions to the destination server done
as a batch later. In either case, the actual deletions on the
Noveck, et al. Expires August 4, 2016 [Page 42]
Internet-Draft nfsv4-3530-migr-update February 2016
destination server have to be delayed until all of the other state
information has been transferred.
Alternatively, RELEASE_LOCKOWNER can be dealt with by returning
NFS4ERR_DELAY. In order to avoid compatibility issues for clients
not prepared to accept NFS4ERR_DELAY in response to
RELEASE_LOCKOWNER, care must be exercised. (See Section 8.3 for
details.)
The approach outlined above, wherein NFS$ERR_DELAY is returned based
primarily on the use of current and saved filehandles in the file
system, prevents all reference to the transitioning file system,
rather than limiting the delayed operations to those that change
locking state on the transitioning file system. Because of this,
servers may choose to limit the time during which this broad approach
is used by adopting a layered approach to the issue.
o During the preparatory phase, operations that change, create, or
destroy locks or modify the valid set of stateids will return
NFS4ERR_DELAY. During this phase, owner-associated seqids may
change, and the identity of the file system associated with the
last request for a given owner may change as well. Also,
RELEASE_LOCKOWNER operations may be processed without returning
NFS4ERR_DELAY as long as the fact of the lock-owner deletion is
recorded locally for later transmission.
o During the restrictive phase, operations that change locking state
for the file system in transition are prevented by returning
NFS4ERR_DELAY on any attempt to make a filehandle within that file
system either the current or saved filehandle for a request.
RELEASE_LOCKOWNER operations may return NFS4ERR_DELAY, but if they
are processed, the lock-owner deletion needs to be communicated
immediately to the destination server.
A possible sequence would be the following.
o The server enters the preparatory phase for the transitioning file
system.
o At this point locking state, including stateids, locks, owner
strings are transferred to the destination server. The seqids
associated with owners are either not transferred, or transferred
on a provisional basis, subject to later change.
o After the above has been transferred, the server may enter the
restrictive phase for the file system.
Noveck, et al. Expires August 4, 2016 [Page 43]
Internet-Draft nfsv4-3530-migr-update February 2016
o At this point, the updated seqid values may be sent to the
destination server.
Reporting regarding pending owner deletions (as a result of
RELEASE_LOCKOWNER operations) can be communicated at the same
time.
o Once it is known that all of this information has been transferred
to the destination server, and there are no pending
RELEASE_LOCKOWNER notifications outstanding, the source server may
treat the file system transition as having occurred and return
NFS4ERR_MOVED when an attempt is made to access it.
8. Additional Changes
This chapter contains a number of items which relate to the changes
in the chapters above, but which, for one reason or another, exist in
different portions of the specification to be updated.
8.1. Summary of Additional Changes from Previous Documents
Summarized here are all the remaining changes, not included in the
two main chapters.
o New definition of the error NFS4ERR_CLID_INUSE, appearing in
Section 8.2. This replaces the definition in Section 13.1.10.1 in
[RFC7530].
o A revision of the error definitions chapter to allow
RELEASE_LOCKOWNER to return NFS4ERR_DELAY, with appropriate
constraints to assure interoperability with clients not expecting
this error to be returned. These changes are discussed in
Section 8.2 and modify the error tables in Sections 13.2 and 13.4
in [RFC7530].
o A revised description of SETCLIENTID, appearing in Section 8.4.
This brings the description into sync with the rest of the spec
regarding NFS4ERR_CLID_INUSE. The revised description replace the
one in Section 16.33 of [RFC7530].
o Some security-related changes appear in Sections 8.5 and 8.6. The
Security Considerations section of this document (Section 9)
describes the effect on the corresponding section (Section 19) in
[RFC7530].
Noveck, et al. Expires August 4, 2016 [Page 44]
Internet-Draft nfsv4-3530-migr-update February 2016
8.2. NFS4ERR_CLID_INUSE definition
The definition of this error is now as follows
The SETCLIENTID operation has found that the id string within the
specified nfs_client_id4 was previously presented with a different
principal and that client instance currently holds an active
lease. A server MAY return this error if the same principal is
used but a change in authentication flavor gives good reason to
reject the new SETCLIENTID operation as not bona fide.
8.3. NFS4ERR_DELAY return from RELEASE_LOCKOWNER
The existing error tables should be considered modified to allow
NFS4ERR_DELAY to be returned by RELEASE_LOCKOWNER. However, the
scope of this addition is limited and is not to be considered as
making this error return generally acceptable.
It needs to be made clear that servers may not return this error to
clients not prepared to support file system migration. Such clients
may be following the error specifications in [RFC7530] and so might
not expect NFS4ERR_DELAY to be returned on RELEASE_LOCKOWNER.
The following constraint applies to this additional error return, as
if it were a note appearing together with the newly allowed error
code:
In order to make server state fixed for a file system being
migrated, a server MAY return NFS4ERR_DELAY in response to a
RELEASE_LOCKOWNER that will affect locking state being propagated
to a destination server. The source server MUST NOT do so unless
it is likely that it will later return NFS4ERR_MOVED for the file
system in question.
In the context of lock-owner release, the set of file systems such
that server state being made fixed can result in NFS4ERR_DELAY
must include the file system on which the operation associated
with the current lock-owner seqid was performed.
In addition, this set may include other file systems on which an
operation associated with an earlier seqid for the current lock-
owner seqid was performed, since servers will have to deal with
the issue of an owner being used in succession for multiple file
systems.
Thus, if a client that is prepared to receive NFS4ERR_MOVED after
creating state associated with a given file system, it also needs
to be prepared to receive NFS4ERR_DELAY in response to
Noveck, et al. Expires August 4, 2016 [Page 45]
Internet-Draft nfsv4-3530-migr-update February 2016
RELEASE_LOCKOWNER, if it has used that owner in connection with a
file on that file system.
8.4. Operation 35: SETCLIENTID - Negotiate Client ID
8.4.1. SYNOPSIS
client, callback, callback_ident -> clientid, setclientid_confirm
8.4.2. ARGUMENT
struct SETCLIENTID4args {
nfs_client_id4 client;
cb_client4 callback;
uint32_t callback_ident;
};
8.4.3. RESULT
struct SETCLIENTID4resok {
clientid4 clientid;
verifier4 setclientid_confirm;
};
union SETCLIENTID4res switch (nfsstat4 status) {
case NFS4_OK:
SETCLIENTID4resok resok4;
case NFS4ERR_CLID_INUSE:
clientaddr4 client_using;
default:
void;
};
8.4.4. DESCRIPTION
The client uses the SETCLIENTID operation to notify the server of its
intention to use a particular client identifier, callback, and
callback_ident for subsequent requests that entail creating lock,
share reservation, and delegation state on the server. Upon
successful completion the server will return a shorthand client ID
which, if confirmed via a separate step, will be used in subsequent
file locking and file open requests. Confirmation of the client ID
must be done via the SETCLIENTID_CONFIRM operation to return the
client ID and setclientid_confirm values, as verifiers, to the
server. The reason why two verifiers are necessary is that it is
possible to use SETCLIENTID and SETCLIENTID_CONFIRM to modify the
callback and callback_ident information but not the shorthand client
Noveck, et al. Expires August 4, 2016 [Page 46]
Internet-Draft nfsv4-3530-migr-update February 2016
ID. In that event, the setclientid_confirm value is effectively the
only verifier.
The callback information provided in this operation will be used if
the client is provided an open delegation at a future point.
Therefore, the client must correctly reflect the program and port
numbers for the callback program at the time SETCLIENTID is used.
The callback_ident value is used by the server on the callback. The
client can leverage the callback_ident to eliminate the need for more
than one callback RPC program number, while still being able to
determine which server is initiating the callback.
8.4.5. IMPLEMENTATION
To specify the implementation of SETCLIENTID, the following notations
are used.
Let:
x be the value of the client.id subfield of the SETCLIENTID4args
structure.
v be the value of the client.verifier subfield of the
SETCLIENTID4args structure.
c be the value of the client ID field returned in the
SETCLIENTID4resok structure.
k represent the value combination of the fields callback and
callback_ident fields of the SETCLIENTID4args structure.
s be the setclientid_confirm value returned in the SETCLIENTID4resok
structure.
{ v, x, c, k, s } be a quintuple for a client record. A client
record is confirmed if there has been a SETCLIENTID_CONFIRM
operation to confirm it. Otherwise it is unconfirmed. An
unconfirmed record is established by a SETCLIENTID call.
8.4.5.1. IMPLEMENTATION (Preparatory Phase)
Since SETCLIENTID is a non-idempotent operation, our treatment
assumes use of a duplicate request cache (DRC). For a discussion of
the DRC, see Section 9.1.7 of [RFC7530].
Noveck, et al. Expires August 4, 2016 [Page 47]
Internet-Draft nfsv4-3530-migr-update February 2016
When the server gets a SETCLIENTID { v, x, k } request, it first does
a number of preliminary checks as listed below before proceeding to
the main part of SETCLIENTID processing.
o It first looks up the request in the DRC. If there is a hit, it
returns the result cached in the DRC. The server does NOT remove
client state (locks, shares, delegations) nor does it modify any
recorded callback and callback_ident information for client { x }.
The server now proceeds to the main part of SETCLIENTID.
o Otherwise (i.e., in the case of any DRC miss), the server takes
the client id string x, and searches for confirmed client records
for x that the server may have recorded from previous SETCLIENTID
calls. If there are no such, or if all such records have a
recorded principal which matches that of the current request's
principal, then the preparatory phase proceeds as follows.
* If there is a confirmed client record with a matching client id
string and a non-matching principal, the server checks the
current state of the associated lease. If there is no
associated state for the lease, or the lease has expired, the
server proceeds to the main part of SETCLIENTID.
* Otherwise, the server is being asked to do a SETCLIENTID for a
client by a non-matching principal while there is active state.
In this case, the server rejects the SETCLIENTID request
returning an NFS4ERR_CLID_INUSE error, since use of a single
client with multiple principals is not allowed. Note that even
though the previously used clientaddr4 is returned with this
error, the use of the same id string with multiple
clientaddr4's is not prohibited, while its use with multiple
principals is prohibited.
8.4.5.2. IMPLEMENTATION (Main Phase)
If the SETCLIENTID has not been dealt with by DRC processing, and has
not been rejected with an NFS4ERR_CLID_INUSE error, then the main
part of SETCLIENTID processing proceeds, as described below.
o The server checks if it has recorded a confirmed record for { v,
x, c, l, s }, where l may or may not equal k. If so, and since
the id verifier v of the request matches that which is confirmed
and recorded, the server treats this as a probable callback
information update and records an unconfirmed { v, x, c, k, t }
and leaves the confirmed { v, x, c, l, s } in place, such that t
!= s. It does not matter if k equals l or not. Any pre-existing
unconfirmed { v, x, c, *, * } is removed.
Noveck, et al. Expires August 4, 2016 [Page 48]
Internet-Draft nfsv4-3530-migr-update February 2016
The server returns { c, t }. It is indeed returning the old
clientid4 value c, because the client apparently only wants to
update callback value k to value l. It's possible this request is
one from the Byzantine router that has stale callback information,
but this is not a problem. The callback information update is
only confirmed if followed up by a SETCLIENTID_CONFIRM { c, t }.
The server awaits confirmation of k via SETCLIENTID_CONFIRM { c, t
}.
The server does NOT remove client (lock/share/delegation) state
for x.
o The server has previously recorded a confirmed { u, x, c, l, s }
record such that v != u, l may or may not equal k, and has not
recorded any unconfirmed { *, x, *, *, * } record for x. The
server records an unconfirmed { v, x, d, k, t } (d != c, t != s).
The server returns { d, t }.
The server awaits confirmation of { d, k } via SETCLIENTID_CONFIRM
{ d, t }.
The server does NOT remove client (lock/share/delegation) state
for x.
o The server has previously recorded a confirmed { u, x, c, l, s }
record such that v != u, l may or may not equal k, and recorded an
unconfirmed { w, x, d, m, t } record such that c != d, t != s, m
may or may not equal k, m may or may not equal l, and k may or may
not equal l. Whether w == v or w != v makes no difference. The
server simply removes the unconfirmed { w, x, d, m, t } record and
replaces it with an unconfirmed { v, x, e, k, r } record, such
that e != d, e != c, r != t, r != s.
The server returns { e, r }.
The server awaits confirmation of { e, k } via SETCLIENTID_CONFIRM
{ e, r }.
The server does NOT remove client (lock/share/delegation) state
for x.
o The server has no confirmed { *, x, *, *, * } for x. It may or
may not have recorded an unconfirmed { u, x, c, l, s }, where l
may or may not equal k, and u may or may not equal v. Any
unconfirmed record { u, x, c, l, * }, regardless whether u == v or
Noveck, et al. Expires August 4, 2016 [Page 49]
Internet-Draft nfsv4-3530-migr-update February 2016
l == k, is replaced with an unconfirmed record { v, x, d, k, t }
where d != c, t != s.
The server returns { d, t }.
The server awaits confirmation of { d, k } via SETCLIENTID_CONFIRM
{ d, t }. The server does NOT remove client (lock/share/
delegation) state for x.
The server generates the clientid and setclientid_confirm values and
must take care to ensure that these values are extremely unlikely to
ever be regenerated.
8.5. Security Considerations for Inter-server Information Transfer
Although the means by which the source and destination server
communicate is not specified by NFSv4.0, the following security-
related considerations for inter-server communication should be
noted.
o Communication between source and destination servers needs to be
carried out in a secure manner, with protection against deliberate
modification of data in transit provided either by use of private
network, or by using a security mechanism that ensures integrity.
In many cases, privacy will also be required, requiring a
strengthened security mechanism if a private network is not used.
o Effective implementation of the file system migration function
requires that a trust relationship exist between source and
destination servers. The details of that trust relationship
depend on the specifics of the inter-server transfer protocol,
which is outside the scope of this specification.
o The source server may communicate to the destination server
security-related information in order to allow it to more
rigorously validate clients' identity. For example, the
destination server might reject a SETCLIENTID done with a
different principal or with a different IP address than was done
previously by the client on the source server. However, the
destination server MUST NOT use this information to allow any
operation to be performed by the client that would not be allowed
otherwise.
8.6. Security Considerations Revision
The penultimate paragraph of Section 19 of [RFC7530] should be
revised to read as follows:
Noveck, et al. Expires August 4, 2016 [Page 50]
Internet-Draft nfsv4-3530-migr-update February 2016
Because the operations SETCLIENTID/SETCLIENTID_CONFIRM are
responsible for the release of client state, it is imperative that
the principal used for these operations is checked against and
match the previous use of these operations. In addition, use of
integrity protection is desirable on the SETCLIENTID operation, to
prevent an attack whereby a change in the boot instance id
(verifier) forces an undesired loss of client state. See the
Section 5 for further discussion.
9. Security Considerations
The security considerations of [RFC7530] remain appropriate with the
exception of the modification to the penultimate paragraph specified
in Section 8.6 of this document and the addition of the material in
Section 8.5.
10. IANA Considerations
This document does not require actions by IANA.
11. References
11.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
[RFC7530] Haynes, T., Ed. and D. Noveck, Ed., "Network File System
(NFS) Version 4 Protocol", RFC 7530, DOI 10.17487/RFC7530,
March 2015, <http://www.rfc-editor.org/info/rfc7530>.
11.2. Informative References
[info-migr]
Noveck, D., Ed., Shivam, P., Lever, C., and B. Baker,
"NFSv4 migration: Implementation experience and spec
issues to resolve", March 2015, <http://www.ietf.org/id/
draft-ietf-nfsv4-migration-issues-07.txt>.
Work in progress.
[RFC1813] Callaghan, B., Pawlowski, B., and P. Staubach, "NFS
Version 3 Protocol Specification", RFC 1813,
DOI 10.17487/RFC1813, June 1995,
<http://www.rfc-editor.org/info/rfc1813>.
Noveck, et al. Expires August 4, 2016 [Page 51]
Internet-Draft nfsv4-3530-migr-update February 2016
[RFC5661] Shepler, S., Ed., Eisler, M., Ed., and D. Noveck, Ed.,
"Network File System (NFS) Version 4 Minor Version 1
Protocol", RFC 5661, DOI 10.17487/RFC5661, January 2010,
<http://www.rfc-editor.org/info/rfc5661>.
Appendix A. Acknowledgements
The editor and authors of this document gratefully acknowledge the
contributions of Trond Myklebust of Primary Data and Robert Thurlow
of Oracle. We also thank Tom Haynes of Primary Data and Spencer
Shepler of Microsoft for their guidance and suggestions.
Special thanks go to members of the Oracle Solaris NFS team,
especially Rick Mesta and James Wahlig, for their work implementing
an NFSv4.0 migration prototype and identifying many of the issues
addressed here.
Authors' Addresses
David Noveck (editor)
Hewlett Packard Enterprise
165 Dascomb Road
Andover, MA 01810
US
Phone: +1 978 474 2011
Email: davenoveck@gmail.com
Piyush Shivam
Oracle Corporation
5300 Riata Park Ct.
Austin, TX 78727
US
Phone: +1 512 401 1019
Email: piyush.shivam@oracle.com
Charles Lever
Oracle Corporation
1015 Granger Avenue
Ann Arbor, MI 48104
US
Phone: +1 734 274 2396
Email: chuck.lever@oracle.com
Noveck, et al. Expires August 4, 2016 [Page 52]
Internet-Draft nfsv4-3530-migr-update February 2016
Bill Baker
Oracle Corporation
5300 Riata Park Ct.
Austin, TX 78727
US
Phone: +1 512 401 1081
Email: bill.baker@oracle.com
Noveck, et al. Expires August 4, 2016 [Page 53]