Internet DRAFT - draft-ietf-scim-device-model

draft-ietf-scim-device-model







Network Working Group                                         M. Shahzad
Internet-Draft                                                  H. Iqbal
Intended status: Standards Track         North Carolina State University
Expires: 5 September 2024                                        E. Lear
                                                           Cisco Systems
                                                            4 March 2024


               Device Schema Extensions to the SCIM model
                    draft-ietf-scim-device-model-03

Abstract

   The initial core schema for SCIM (System for Cross Identity
   Management) was designed for provisioning users.  This memo specifies
   schema extensions that enables provisioning of devices, using various
   underlying bootstrapping systems, such as Wifi EasyConnect, FIDO
   device onboarding vouchers, BLE passcodes, and MAC authenticated
   bypass.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 5 September 2024.

Copyright Notice

   Copyright (c) 2024 IETF Trust and the persons identified as the
   document authors.  All rights reserved.










Shahzad, et al.         Expires 5 September 2024                [Page 1]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Revised BSD License text as
   described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Revised BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Why SCIM for devices? . . . . . . . . . . . . . . . . . .   3
     1.2.  Protocol Participants . . . . . . . . . . . . . . . . . .   4
     1.3.  Schema Description  . . . . . . . . . . . . . . . . . . .   5
     1.4.  Schema Representation . . . . . . . . . . . . . . . . . .   5
     1.5.  Terminology . . . . . . . . . . . . . . . . . . . . . . .   5
   2.  ResourceType Device . . . . . . . . . . . . . . . . . . . . .   5
     2.1.  Common Attributes . . . . . . . . . . . . . . . . . . . .   5
   3.  SCIM Core Device Schema . . . . . . . . . . . . . . . . . . .   6
     3.1.  Singular Attributes . . . . . . . . . . . . . . . . . . .   6
   4.  Device Groups . . . . . . . . . . . . . . . . . . . . . . . .   7
   5.  Resource Type EndpointApp . . . . . . . . . . . . . . . . . .   8
   6.  SCIM EndpointApp Schema . . . . . . . . . . . . . . . . . . .   8
     6.1.  Common Attributes . . . . . . . . . . . . . . . . . . . .   8
     6.2.  Singular Attributes . . . . . . . . . . . . . . . . . . .   8
     6.3.  Complex Attribute . . . . . . . . . . . . . . . . . . . .   9
   7.  SCIM Device Extensions  . . . . . . . . . . . . . . . . . . .  11
     7.1.  BLE Extension . . . . . . . . . . . . . . . . . . . . . .  11
       7.1.1.  Singular Attributes . . . . . . . . . . . . . . . . .  12
       7.1.2.  Multivalued Attributes  . . . . . . . . . . . . . . .  12
       7.1.3.  BLE Pairing Method Extensions . . . . . . . . . . . .  13
     7.2.  DPP EasyConnect Extension . . . . . . . . . . . . . . . .  18
       7.2.1.  Singular Attributes . . . . . . . . . . . . . . . . .  18
       7.2.2.  Multivalued Attributes  . . . . . . . . . . . . . . .  18
     7.3.  Ethernet MAB Extension  . . . . . . . . . . . . . . . . .  20
       7.3.1.  Single Attribute  . . . . . . . . . . . . . . . . . .  21
     7.4.  Fido Device Onboarding Extension  . . . . . . . . . . . .  22
       7.4.1.  Single Attribute  . . . . . . . . . . . . . . . . . .  22
     7.5.  Zigbee Extension  . . . . . . . . . . . . . . . . . . . .  23
       7.5.1.  Singular Attribute  . . . . . . . . . . . . . . . . .  23
       7.5.2.  Multivalued Attribute . . . . . . . . . . . . . . . .  24
     7.6.  The Endpoint Applications Extension Schema  . . . . . . .  25
       7.6.1.  Singular Attributes . . . . . . . . . . . . . . . . .  25
       7.6.2.  Multivalued Attribute . . . . . . . . . . . . . . . .  25
   8.  Schema JSON Representation  . . . . . . . . . . . . . . . . .  28
     8.1.  Resource Schema . . . . . . . . . . . . . . . . . . . . .  28
     8.2.  Device Core Schema JSON . . . . . . . . . . . . . . . . .  30



Shahzad, et al.         Expires 5 September 2024                [Page 2]

Internet-Draft        SCIM Device Schema Extensions           March 2024


     8.3.  EndpointApp Schema JSON . . . . . . . . . . . . . . . . .  31
     8.4.  BLE Extension Schema JSON . . . . . . . . . . . . . . . .  33
     8.5.  DPP Extension Schema JSON . . . . . . . . . . . . . . . .  38
     8.6.  Ethernet MAB Extension Schema JSON  . . . . . . . . . . .  40
     8.7.  FDO Extension Schema JSON . . . . . . . . . . . . . . . .  40
     8.8.  Zigbee Extension Schema JSON  . . . . . . . . . . . . . .  41
     8.9.  EndpointAppsExt JSON Extension Schema . . . . . . . . . .  42
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .  44
   10. IANA Considerations . . . . . . . . . . . . . . . . . . . . .  44
   11. References  . . . . . . . . . . . . . . . . . . . . . . . . .  45
     11.1.  Normative References . . . . . . . . . . . . . . . . . .  45
     11.2.  Informative References . . . . . . . . . . . . . . . . .  46
   Appendix A.  Changes from Earlier Versions  . . . . . . . . . . .  47
   Appendix B.  OpenAPI representation . . . . . . . . . . . . . . .  47
     B.1.  Device Core Schema OpenAPI Representation . . . . . . . .  47
     B.2.  EndpointApp Schema OpenAPI Representation . . . . . . . .  49
     B.3.  BLE Extension Schema OpenAPI Representation . . . . . . .  53
     B.4.  DPP Extension Schema OpenAPI Representation . . . . . . .  57
     B.5.  Ethernet MAB Extension Schema OpenAPI Representation  . .  58
     B.6.  FDO Extension Schema OpenAPI Representation . . . . . . .  59
     B.7.  Zigbee Extension Schema OpenAPI Representation  . . . . .  60
     B.8.  EndpointAppsExt Extension Schema OpenAPI
           Representation  . . . . . . . . . . . . . . . . . . . . .  61
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  63

1.  Introduction

   The Internet of Things presents a management challenge in many
   dimensions.  One of them is the ability to onboard and manage large
   number of devices.  There are many models for bootstrapping trust
   between devices and network deployments.  Indeed it is expected that
   different manufacturers will make use of different methods.

   SCIM (System for Cross Identity Management) [RFC7643] [RFC7644]
   defines a protocol and a schema for provisioning of users.  However,
   it can easily be extended to provision devices.  The protocol and
   core schema were designed to permit just such extensions.  Bulk
   operations are supported.  This is good because often devices are
   procured in bulk.

1.1.  Why SCIM for devices?

   Some might ask why SCIM is well suited for this purpose and not, for
   example, NETCONF or RESTCONF with YANG.  After all, there are all
   sorts of existing models available.  The answer is that the only
   information being passed about the device is neither state nor device
   configuration information, but only information necessary to
   bootstrap trust so that the device may establish connectivity.



Shahzad, et al.         Expires 5 September 2024                [Page 3]

Internet-Draft        SCIM Device Schema Extensions           March 2024


1.2.  Protocol Participants

   In the normal SCIM model, it was presumed that large federated
   deployments would be SCIM clients who provision and remove employees
   and contractors as they are enter and depart those deployments, and
   federated services such as sales, payment, or conferencing services
   would be the servers.

   In the device model, the roles are reversed, and may be somewhat more
   varied.  A deployment network management system gateway (NMS gateway)
   plays the role of the server, receiving information about devices
   that are expected to be connected to its network.  That server will
   apply appropriate local policies regarding whether/how the device
   should be connected.

   The client may be one of a number of entities:

   *  A vendor who is authorized to add devices to a network as part of
      a sales transaction.  This is similar to the sales integration
      sometimes envisioned by Bootstrapping Remote Key Infrastructure
      (BRSKI) [RFC8995].

   *  A client application that administrators or employees use to add,
      remove, or get information about devices.  An example might be an
      tablet or phone app that scans Easyconnect QR codes.

                               +-----------------------------------+
                               |                                   |
       +-----------+   Request |  +---------+                      |
       | onboarding|------------->|  SCIM   |                      |
       |    app    |<-------------| Server  |                      |
       +-----------+  Ctrl Endpt  +---------+                      |
                               |                                   |
       +-----------+           |  +------------+         +-------+ |
       |  Control  |...........|..|    ALG     |.........|device | |
       |    App    |           |  +------------+         +-------+ |
       +-----------+           |                                   |
                               |                                   |
                               +-----------------------------------+

                        Figure 1: Basic Architecture

   In Figure 1, the onboarding app provides the device particulars.  As
   part of the response, the SCIM server might provide additional
   information, especially in the case of non-IP devices, where an
   application-layer gateway may need to be used to communicate with the
   device.  The control endpoint is one among a number of objects that
   may be returned.



Shahzad, et al.         Expires 5 September 2024                [Page 4]

Internet-Draft        SCIM Device Schema Extensions           March 2024


1.3.  Schema Description

   RFC 7643 does not prescribe a language to describe a schema.  We have
   chosen the JSON schema language [I-D.bhutton-json-schema] for this
   purpose.  the use of XML for this SCIM devices is not supported.

   Several additional schemas specify specific onboarding mechanisms,
   such as BLE and Wifi Easy Connect.

1.4.  Schema Representation

   Attributes defined in the device core schema and extensions comprise
   characteristics and SCIM datatypes defined in Sections 2.2 and 2.3 of
   the [RFC7643].  This specifciation does not define new
   characteristics and datatypes for the SCIM attributes.

1.5.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

2.  ResourceType Device

   A new resource type 'Device' is specified.  The "ResourceType" schema
   specifies the metadata about a resource type (see section 6 of
   [RFC7643]).  The resource "Devices" comprises a core device schema
   and several extension schemas.  The core schema provides a minimal
   resource representation, whereas extension schemas extend the core
   schema depending on the device's capability.  The JSON schema for
   Device resource type is in Section 8.1.

2.1.  Common Attributes

   The Device schema contains three common attributes as defined in the
   [RFC7643].

   id

   An id is a required and unique attribute of the device core schema
   (see section 3.1 of [RFC7643]).

   externalID

   An externalID is an optional attribute (see section 3.1 of
   [RFC7643]).



Shahzad, et al.         Expires 5 September 2024                [Page 5]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   meta

   Meta is a complex attribute and is required (see section 3.1 of
   [RFC7643]).

3.  SCIM Core Device Schema

   The core device schema provides the minimal representation of a
   resource "Device".  It contains only those attributes that any device
   may need, and only one attribute is required.  The core schema for
   "Device" is identified using the schema URI:
   "urn:ietf:params:scim:schemas:core:2.0:Device".  The following
   attributes are defined in the device core schema.

3.1.  Singular Attributes

   deviceDisplayName

   This attribute is of type "string" and provides a human-readable name
   for a device.  It is intended to be displayed to end-users and should
   be suitable for that purpose.  The attribute is not required, and is
   not case-sensitive.  It may be modified and SHOULD be returned by
   default.  No uniqueness constraints are imposed on this attribute.

   adminState

   The "adminState" attribute is of type "boolean" and is a mutable
   attribute, and is required.  If set to TRUE, it means that this
   device is intended to be operational.  Attempts to control or access
   a device where this value is set to FALSE may fail.  For example,
   when used in conjunction with NIPC [I-D.brinckman-nipc], commands
   such as connect, disconnect, subscribe that control app sends to the
   controller for the devices any command coming from the control app
   for the device will be rejected by the controller.

   mudUrl

   The mudUrl attribute represents the URL to the MUD file associated
   with this device.  This attribute is optional and mutable.  The
   mudUrl value is case sensitive and not unique.  When present, this
   attribute may be used as described in [RFC8520].  This attribute is
   case sensitive and returned by default.









Shahzad, et al.         Expires 5 September 2024                [Page 6]

Internet-Draft        SCIM Device Schema Extensions           March 2024


    +===================+=====+===+=======+=========+========+========+
    | Attribute         |Multi|Req| Case  | Mutable | Return | Unique |
    |                   |Value|   | Exact |         |        |        |
    +===================+=====+===+=======+=========+========+========+
    | deviceDisplayName |F    |F  | F     | RW      | Def    | None   |
    +-------------------+-----+---+-------+---------+--------+--------+
    | adminState        |F    |T  | F     | RW      | Def    | None   |
    +-------------------+-----+---+-------+---------+--------+--------+
    | mudUrl            |F    |F  | T     | RW      | Def    | None   |
    +-------------------+-----+---+-------+---------+--------+--------+

       Table 1: Characteristics of device schema attributes.  (Req =
          Required, T = True, F = False, RW = ReadWrite, and Def =
                                  Default)

   An example of a device SCIM object is as follows:

   <CODE BEGINS>
   {
           "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device"],
           "id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
           "deviceDisplayName": "BLE Heart Monitor",
           "adminState": true,
           "meta": {
             "resourceType": "Device",
         "created": "2022-01-23T04:56:22Z",
             "lastModified": "2022-05-13T04:42:34Z",
             "version": "W\/\"a330bc54f0671c9\"",
             "location": "https://example.com/v2/Device/e9e30dba-f08f
                -4109-8486-d5c6a3316111"
           }
   }
   <CODE ENDS>

   The schema for the device is presented in JSON format in
   Section Section 8.2, while the openAPI representation is provided in
   Section Appendix B.1.

4.  Device Groups

   Device groups are created using the SCIM groups as defined in
   [RFC7643] Section 4.2.









Shahzad, et al.         Expires 5 September 2024                [Page 7]

Internet-Draft        SCIM Device Schema Extensions           March 2024


5.  Resource Type EndpointApp

   This section defines a new resource type, 'EndpointApp'.  The
   "ResourceType" schema specifies the metadata about a resource type
   (see section 6 of [RFC7643]).  The resource "EndpointApp" represents
   client applications that can control and/or receive data from the
   devices.  The JSON schema for EndpointApp resource type is in
   Section 8.1.

   The attributes comprising EndpointsApp are listed in Section 6.  The
   "EndpointApp" are included in the endpoint applications extension
   ("endpointAppsExt") Section 7.6.

6.  SCIM EndpointApp Schema

   The schema for "EndpointApp" is identified using the schema URI:
   "urn:ietf:params:scim:schemas:core:2.0:EndpointApp".  The following
   attributes are defined in this schema.

6.1.  Common Attributes

   The EndpointApp schema contains three common attributes as defined in
   the [RFC7643].

6.2.  Singular Attributes

   applicationType

   This attribute is of type "string" and represents the type of
   application.  It will only contain two values; 'deviceControl' or
   'telemetry'. 'deviceControl' is the application that sends commands
   to control the device. 'telemetry' is the application that receives
   data from the device.  The attribute is required, and is not case-
   sensitive.  The is attribute readOnly and should be returned by
   default.  No uniqueness constraints are imposed on this attribute.

   applicationName

   The "applicationName" attribute is of type "string" and represents a
   human readable name for the application.  This attribute is required
   and mutable.  The attribute should be returned by default and there
   is no uniqueness contraint on the attribute.

   clientToken







Shahzad, et al.         Expires 5 September 2024                [Page 8]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   This attribute type string contains a token that the client will use
   to authenticate itself.  Each token may be a string up to 500
   characters in length.  It is mutable, required, case sensitive and
   returned by default if it exists.

6.3.  Complex Attribute

   certificateInfo

   It is the complex attribute that Contains x509 certificate's subject
   name and root CA information associated with the device control or
   telemetry app.  It further has three attributes that are described
   below.

   rootCN

   It is the root certificate common name.  This attribute is required,
   read only, singular and case sensitive.

   subjectName

   Also known as the Common Name (CN), the Subject Name is a field in
   the X.509 certificate that identifies the primary domain or IP
   address for which the certificate is issued.  This attribute is not
   required, read only, singular and case sensitive.

   subjectAlternativeName

   This attribute allows for the inclusion of multiple domain names and
   IP addresses in a single certificate.  This enables the certificate
   to be used for multiple related domains or IPs without the need for
   separate certificates for each.  This attribute is not required, read
   only, multivalued and case sensitive.


















Shahzad, et al.         Expires 5 September 2024                [Page 9]

Internet-Draft        SCIM Device Schema Extensions           March 2024


    +=================+=======+===+=======+=========+========+========+
    | Attribute       | Multi |Req| Case  | Mutable | Return | Unique |
    |                 | Value |   | Exact |         |        |        |
    +=================+=======+===+=======+=========+========+========+
    | applicationType | F     |T  | F     | R       | Def    | None   |
    +-----------------+-------+---+-------+---------+--------+--------+
    | applicationName | F     |T  | F     | RW      | Def    | None   |
    +-----------------+-------+---+-------+---------+--------+--------+
    | clientToken     | F     |T  | T     | R       | Def    | None   |
    +-----------------+-------+---+-------+---------+--------+--------+
    | certificateInfo | F     |F  | F     | RW      | Def    | None   |
    +-----------------+-------+---+-------+---------+--------+--------+
    | rootCN          | F     |T  | T     | R       | Def    | None   |
    +-----------------+-------+---+-------+---------+--------+--------+
    | subjectName     | F     |F  | T     | R       | Def    | None   |
    +-----------------+-------+---+-------+---------+--------+--------+
    | subjectAltName  | T     |F  | T     | R       | Def    | None   |
    +-----------------+-------+---+-------+---------+--------+--------+

         Table 2: Characteristics of EndpointApp schema attributes.
          (Req = Required, T = True, F = False, R = ReadOnly, RW =
             ReadWrite, Manuf = Manufactirer and Def = Default)

   Note that attributes clientToken and certificateInfo are used for the
   authentication of the application.  Both SHALL NOT exist together in
   the SCIM object.  Either clientToken or certificateInfo SHALL be
   present in the SCIM object.

   An example of a endpointApp SCIM object is as follows.  Note that
   since certificateInfo is present in the example, clientToken
   attribute is NULL.




















Shahzad, et al.         Expires 5 September 2024               [Page 10]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:EndpointApp"],
     "id": "e9e30dba-f08f-4109-8486-d5c6a3316212",
     "applicationType": "deviceControl",
     "applicationName": "Device Control App 1",
     "certificateInfo": {
         "rootCN": "DigiCert Global Root CA",
         "subjectName": "wwww.example.com",
         "subjectAlternativeName": ["xyz.example.com",
             "abc.example.com"]
     },
     "clientToken": null,
     "meta": {
       "resourceType": "EndpointApp",
       "created": "2022-01-23T04:56:22Z",
       "lastModified": "2022-05-13T04:42:34Z",
       "version": "W\/\"a330bc54f0671c9\"",
       "location": "https://example.com/v2/EndpointApp/e9e30dba-f08f
          -4109-8486-d5c6a3316212"
     }
   }
   <CODE ENDS>

   The schema for the endpointApp is presented in JSON format in
   Section Section 8.3, while the openAPI representation is provided in
   Section Appendix B.2.

7.  SCIM Device Extensions

   SCIM provides various extension schemas, their attributes, JSON
   representation, and example object.  These schemas extend the core
   device schema based on the device's capability (communication stack).
   This RFC presents an additional hierarchical level by introducing
   extensions within an extension.  See below for more details.

7.1.  BLE Extension

   This schema extends the device schema to represent the devices
   supporting BLE.  The extension is identified using the following
   schema URI:

   urn:ietf:params:scim:schemas:extension:ble:2.0:Device

   The attributes are as follows:






Shahzad, et al.         Expires 5 September 2024               [Page 11]

Internet-Draft        SCIM Device Schema Extensions           March 2024


7.1.1.  Singular Attributes

   deviceMacAddress

   A string value that represent a public MAC address assigned by the
   manufacturer.  It is a unique 48-bit value.  Ir is required, case
   insensitive, and it is mutable and return as default.  The regex
   pattern is the following:

   ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}

   isRandom

   A boolean flag taken from the BLE core specification, 5.3.  If FALSE,
   the device is using a public MAC address.  If TRUE, the device uses a
   Random address resolved using IRK.  This attribute is not required,
   it is mutable, and returned by default.  Its default value is FALSE.

   separateBroadcastAddress

   When present, this address is used for broadcasts/advertisements.
   This value MUST NOT be set when an IRK is provided.  Its form is the
   same as deviceMacAddress.  It is not required, multivalued, mutable,
   and returned by default.

   irk

   A string value, Identity resolving key, which is unique for every
   device.  It is used to resolve the random address.  It is required
   when addressType is TRUE.  It is mutable and return by default.

   mobility

   A boolean attribute to enable mobility on BLE device.  If set to
   True, the BLE device will automatically connect to the closest AP.
   For example, BLE device is connected with AP-1 and moves out of range
   but comes in range of AP-2, it will be disconnected with AP-1 and
   connects with AP-2.  It is returned by default and mutable.

7.1.2.  Multivalued Attributes

   versionSupport

   A multivalued attribute that provides all the BLE versions supported
   by the device in the form of an array.  For example, [4.1, 4.2, 5.0,
   5.1, 5.2, 5.3].  It is required, mutable, and return as default.

   pairingMethods



Shahzad, et al.         Expires 5 September 2024               [Page 12]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   An array of pairing methods associated with the BLE device.  The
   pairing methods may require sub-attributes, such as key/password, for
   the device pairing process.  To enable the scalability of pairing
   methods in the future, they are represented as extensions to
   incorporate various attributes that are part of the respective
   pairing process.  Pairing method extensions are nested inside the BLE
   extension.  It is required, case sensitive, mutable, and returned by
   default.

7.1.3.  BLE Pairing Method Extensions

   The details on pairing methods and their associated attributes are in
   section 2.3 of [BLE53].  This memo defines extensions for four
   pairing methods that are nested insided the BLE extension schema.
   Each extension contains the common attributes Section 2.1.  These
   extension are are as follows.

   (i) pairingNull extension is identified using the following schema
   URI:

   urn:ietf:params:scim:schemas:extension:pairingNull:2.0:Device

   pairingNull does not have any attribute.  It allows pairing for BLE
   devices that do not require a pairing method.

   (ii) pairingJustWorks extension is identified using the following
   schema URI:

   urn:ietf:params:scim:schemas:extension:pairingJustWorks:2.0:Device

   Just works pairing method does not require a key to pair devices.
   For completeness, the key attribute is included and is set to 'null'.
   Key attribute is required, immutable, and return by default.

   (iii) pairingPassKey extension is identified using the following
   schema URI:

   urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:Device

   The pass key pairing method requires a 6-digit key to pair devices.
   This extension has one singular integer attribute, "key", which is
   required, mutable and returned by default.  The key pattern is as
   follows:

   ^[0-9]{6}$

   (iv) pairingOOB extension is identified using the following schema
   URI:



Shahzad, et al.         Expires 5 September 2024               [Page 13]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device

   The out-of-band pairing method includes three singular attributes,
   i.e., key, randomNumber, and confirmationNumber.

   key The key is string value, required and received from out-of-bond
   sources such as NFC.  It is case sensitive, mutable, and returned by
   default.

   randomNumber It represents a nounce added to the key.  It is and
   integer value that is required attribute.  It is mutable and returned
   by default.

   confirmationNumber An integer which some solutions require in RESTful
   message exchange.  It is not required.  It is mutable and returned by
   default if it exists.

   +==================+=======+===+=======+=========+========+========+
   | Attribute        | Multi |Req| Case  | Mutable | Return | Unique |
   |                  | Value |   | Exact |         |        |        |
   +==================+=======+===+=======+=========+========+========+
   | deviceMacAddress | F     |T  | F     | RW      | Def    | Manuf  |
   +------------------+-------+---+-------+---------+--------+--------+
   | isRandom         | F     |T  | F     | RW      | Def    | None   |
   +------------------+-------+---+-------+---------+--------+--------+
   | sepBroadcastAdd  | T     |T  | F     | RW      | Def    | None   |
   +------------------+-------+---+-------+---------+--------+--------+
   | irk              | F     |F  | F     | RW      | Def    | Manuf  |
   +------------------+-------+---+-------+---------+--------+--------+
   | versionSupport   | T     |T  | F     | RW      | Def    | None   |
   +------------------+-------+---+-------+---------+--------+--------+
   | mobility         | F     |F  | F     | RW      | Def    | None   |
   +------------------+-------+---+-------+---------+--------+--------+
   | pairingMethods   | T     |T  | T     | RW      | Def    | None   |
   +------------------+-------+---+-------+---------+--------+--------+

       Table 3: Characteristics of BLE extension schema attributes.
      sepBroadcastAdd is short for separateBroadcastAddress.  (Req =
      Required, T = True, F = False, RW = ReadWrite, Def = Default,
                        and Manuf = Manufacturer).

   An example of a device object with BLE extension is as follows:









Shahzad, et al.         Expires 5 September 2024               [Page 14]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
        "urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],

     "id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
     "deviceDisplayName": "BLE Heart Monitor",
     "adminState": true,
     "urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {
       "versionSupport": ["5.3"],
       "deviceMacAddress": "2C:54:91:88:C9:E2",
       "isRandom": false,
       "separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77
          :22:12"],
       "mobility": true,
       "pairingMethods": ["urn:ietf:params:scim:schemas:extension
          :pairingPassKey:2.0:Device"],
       "urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0
          :Device" : {
         "key": 123456
       }
     },
     "meta": {
       "resourceType": "Device",
         "created": "2022-01-23T04:56:22Z",
       "lastModified": "2022-05-13T04:42:34Z",
       "version": "W\/\"a330bc54f0671c9\"",
       "location": "https://example.com/v2/Device/e9e30dba-f08f-4109
          -8486-d5c6a3316111"
     }
   }
   <CODE ENDS>

   In the above example, the pairing method is "pairingPassKey", which
   implies that this BLE device pairs using only a passkey.  In another
   example below, the pairing method is "pairingOOB," implying that this
   BLE device uses the out-of-band pairing method.














Shahzad, et al.         Expires 5 September 2024               [Page 15]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
        "urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],

     "id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
     "deviceDisplayName": "BLE Heart Monitor",
     "adminState": true,
     "urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {
       "versionSupport": ["5.3"],
       "deviceMacAddress": "2C:54:91:88:C9:E2",
       "isRandom": false,
       "separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77
          :22:12"],
       "mobility": true,
       "pairingMethods": ["urn:ietf:params:scim:schemas:extension
          :pairingOOB:2.0:Device"],
       "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device":
           {
         "key": "TheKeyvalueRetrievedFromOOB",
         "randNumber": 238796813516896
       }
     },
     "meta": {
       "resourceType": "Device",
         "created": "2022-01-23T04:56:22Z",
       "lastModified": "2022-05-13T04:42:34Z",
       "version": "W\/\"a330bc54f0671c9\"",
       "location": "https://example.com/v2/Device/e9e30dba-f08f-4109
          -8486-d5c6a3316111"
     }
   }
   <CODE ENDS>

   However, a device can have more than one pairing method.  Support for
   multiple pairing methods is also provided by the multi-valued
   attribute pairingMethods.  In the example below, the BLE device can
   pair with both passkey and OOB pairing methods.













Shahzad, et al.         Expires 5 September 2024               [Page 16]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
        "urn:ietf:params:scim:schemas:extension:ble:2.0:Device"],

     "id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
     "deviceDisplayName": "BLE Heart Monitor",
     "adminState": true,
     "urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {
       "versionSupport": ["5.3"],
       "deviceMacAddress": "2C:54:91:88:C9:E2",
       "isRandom": false,
       "separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77
          :22:12"],
       "mobility": true,
       "pairingMethods": ["urn:ietf:params:scim:schemas:extension
          :pairingPassKey:2.0:Device",
           "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0
              :Device"],
       "urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0
          :Device" : {
         "key": 123456
       },
       "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device":
           {
         "key": "TheKeyvalueRetrievedFromOOB",
         "randNumber": 238796813516896
       }
     },
     "meta": {
       "resourceType": "Device",
         "created": "2022-01-23T04:56:22Z",
       "lastModified": "2022-05-13T04:42:34Z",
       "version": "W\/\"a330bc54f0671c9\"",
       "location": "https://example.com/v2/Device/e9e30dba-f08f-4109
          -8486-d5c6a3316111"
     }
   }
   <CODE ENDS>

   The schema for the BLE extension is presented in JSON format in
   Section Section 8.4, while the openAPI representation is provided in
   Section Appendix B.3.








Shahzad, et al.         Expires 5 September 2024               [Page 17]

Internet-Draft        SCIM Device Schema Extensions           March 2024


7.2.  DPP EasyConnect Extension

   A schema that extends the device schema to enable WiFi EasyConnect
   (otherwise known as Device Provisioning Protocol).  The extension is
   identified using the following schema URI:

   urn:ietf:params:scim:schemas:extension:dpp:2.0:Device

   The attributes in this extension are adopted from [DPP2].  The
   attributes are as follows:

7.2.1.  Singular Attributes

   dppVersion

   An integer that represents the version of DPP the device supports.
   This attribute is required, case insensitive, mutable, and returned
   by default.

   bootstrapKey

   A string value representing Elliptic-Curve Diffie–Hellman (ECDH)
   public key.  The base64 encoded lengths for P-256, P-384, and P-521
   are 80, 96, and 120 characters.  This attribute is required, case-
   sensitive, mutable, and returned by default.

   deviceMacAddress

   The manufacturer assigns the MAC address stored as string.  It is a
   unique 48-bit value.  This attribute is optional, case insensitive,
   mutable, and returned by default.  The regex pattern is as follows:

   ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.

   serialNumber

   An alphanumeric serial number, stored as string, may also be passed
   as bootstrapping information.  This attribute is optional, case
   insensitive, mutable, and returned by default.

7.2.2.  Multivalued Attributes

   bootstrappingMethod

   It is the array of strings of all the bootstrapping methods available
   on the enrollee device.  For example, [QR, NFC].  This attribute is
   optional, case insensitive, mutable, and returned by default.




Shahzad, et al.         Expires 5 September 2024               [Page 18]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   classChannel

   This attribute is an array of strings of global operating class and
   channel shared as bootstrapping information.  It is formatted as
   class/channel.  For example, ['81/1','115/36'].  This attribute is
   optional, case insensitive, mutable, and returned by default.

   +====================+=====+===+======+=========+========+========+
   | Attribute          |Multi|Req| Case | Mutable | Return | Unique |
   |                    |Value|   | Exact|         |        |        |
   +====================+=====+===+======+=========+========+========+
   | dppVersion         |  F  | T |  F   |   RW    |  Def   | None   |
   +--------------------+-----+---+------+---------+--------+--------+
   | bootstrapKey       |  F  | T |  T   |   RW    |  Def   | None   |
   +--------------------+-----+---+------+---------+--------+--------+
   | deviceMacAddress   |  F  | F |  F   |   RW    |  Def   | Manuf  |
   +--------------------+-----+---+------+---------+--------+--------+
   | serialNumber       |  F  | F |  F   |   RW    |  Def   | None   |
   +--------------------+-----+---+------+---------+--------+--------+
   | bootstrappingMethod|  T  | F |  F   |   RW    |  Def   | None   |
   +--------------------+-----+---+------+---------+--------+--------+
   | classChannel       |  T  | F |  F   |   RW    |  Def   | None   |
   +--------------------+-----+---+------+---------+--------+--------+

       Figure 2: Characteristics of DPP extension schema attributes.
        (Req = Required, T = True, F = False, RW = ReadWrite, Def =
                    Default, and Manuf = Manufacturer).

   An example of a device object with DPP extension is below:






















Shahzad, et al.         Expires 5 September 2024               [Page 19]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   {
           "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
                    "urn:ietf:params:scim:schemas:extension:dpp:2.0
                       :Device"],

           "id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
           "displayName": "WiFi Heart Monitor",
           "adminState": true,
           "urn:ietf:params:scim:schemas:extension:dpp:2.0:Device" : {
                   "dppVersion": 2,
                   "bootstrappingMethod": ["QR"],
                   "bootstrapKey":
                       "MDkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDIgADURzxmt
                      tZoIRIPWGoQMV00XHWCAQIhXruVWOz0NjlkIA=",
                   "deviceMacAddress": "2C:54:91:88:C9:F2",
                   "classChannel": ["81/1", "115/36"],
                   "serialNumber": "4774LH2b4044"
           },

           "meta": {
             "resourceType": "Device",
         "created": "2022-01-23T04:56:22Z",
             "lastModified": "2022-05-13T04:42:34Z",
             "version": "W\/\"a330bc54f0671c9\"",
             "location": "https://example.com/v2/Device/e9e30dba-f08f
                -4109-8486-d5c6a3316111"
           }
   }
   <CODE ENDS>

   The schema for the DPP extension is presented in JSON format in
   Section Section 8.5, while the openAPI representation is provided in
   Section Appendix B.4.

7.3.  Ethernet MAB Extension

   This extension enables a legacy means of (very) weak authentication,
   known as MAC Authenticated Bypass (MAB), that is supported in many
   wired ethernet solutions.  If the MAC address is known, then the
   device may be permitted (perhaps limited) access.  The extension is
   identified by the following URI:

   urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0:Device







Shahzad, et al.         Expires 5 September 2024               [Page 20]

Internet-Draft        SCIM Device Schema Extensions           March 2024


7.3.1.  Single Attribute

   This extension has a singular attribute:

   deviceMacAddress

   This is the Ethernet address to be provisioned onto the network.  It
   takes the identical form as found in both the BLE and DPP extensions.

   +==================+=======+===+=======+=========+========+========+
   | Attribute        | Multi |Req| Case  | Mutable | Return | Unique |
   |                  | Value |   | Exact |         |        |        |
   +==================+=======+===+=======+=========+========+========+
   | deviceMacAddress | F     |T  | F     | RW      | Def    | None   |
   +------------------+-------+---+-------+---------+--------+--------+

     Table 4: Characteristics of MAB extension schema attributes (Req
        = Required, T = True, F = False, RW = ReadWrite, and Def =
                                 Default)

   An example of a device object with EthernetMAB extension is shown
   below:

   <CODE BEGINS>
   {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
        "urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0
           :Device"],

     "id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
     "displayName": "Some random Ethernet Device",
     "adminState": true,
     "urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0:Device"
        : {
       "deviceMacAddress": "2C:54:91:88:C9:E2",
     },

     "meta": {
       "resourceType": "Device",
         "created": "2022-01-23T04:56:22Z",
       "lastModified": "2022-05-13T04:42:34Z",
       "version": "W\/\"a330bc54f0671c9\"",
       "location": "https://example.com/v2/Device/e9e30dba-f08f-4109
          -8486-d5c6a3316111"
     }
   }
   <CODE ENDS>




Shahzad, et al.         Expires 5 September 2024               [Page 21]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   The schema for the EthernetMAB extension is presented in JSON format
   in Section Section 8.6, while the openAPI representation is provided
   in Section Appendix B.5.

7.4.  Fido Device Onboarding Extension

   This extension specifies a voucher to be used by a Fido Device
   Onboarding (FDO) owner process [FDO11], so that a trusted
   introduction can be made using that mechanism.

   urn:ietf:params:scim:schemas:extension:fido-device-onboard:2.0:Device

7.4.1.  Single Attribute

   This extension has a singular attribute:

   fdoVoucher

   The voucher is formated as a PEM-encoded object in accordance with
   the FDO specification (citation needed).

     +============+=======+=====+=======+=========+========+========+
     | Attribute  | Multi | Req | Case  | Mutable | Return | Unique |
     |            | Value |     | Exact |         |        |        |
     +============+=======+=====+=======+=========+========+========+
     | fdoVoucher | F     | T   | F     | RW      | Def    | None   |
     +------------+-------+-----+-------+---------+--------+--------+

       Table 5: Characteristics of FDO extension schema attributes
        (Req = Required, T = True, F = False, RW = ReadWrite, and
                              Def = Default)

   An example of a device object with FDO extension is shown below:


















Shahzad, et al.         Expires 5 September 2024               [Page 22]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
        "urn:ietf:params:scim:schemas:extension:fido-device-onboard
           :2.0:Device"],

     "id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
     "displayName": "Some random Ethernet Device",
     "adminState": true,
     "urn:ietf:params:scim:schemas:extension:fido-device-onboard:2.0
        :Device" : {
        "fdoVoucher": "{... voucher ...}",
     },

     "meta": {
       "resourceType": "Device",
         "created": "2022-01-23T04:56:22Z",
       "lastModified": "2022-05-13T04:42:34Z",
       "version": "W\/\"a330bc54f0671c9\"",
       "location": "https://example.com/v2/Device/e9e30dba-f08f-4109
          -8486-d5c6a3316111"
     }
   }
   <CODE ENDS>

   The schema for the FDO extension is presented in JSON format in
   Section Section 8.7, while the openAPI representation is provided in
   Section Appendix B.6.

7.5.  Zigbee Extension

   A schema that extends the device schema to enable the provisioning of
   Zigbee devices.  The extension is identified using the following
   schema URI:

   urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device

   It has one singular attribute and one multivalued attribute.  The
   attributes are as follows:

7.5.1.  Singular Attribute

   deviceEui64Address

   An EUI-64 (Extended Unique Identifier) device address stored as
   string.  This attribute is required, case insensitive, mutable, and
   returned by default.  The regex pattern is as follows:




Shahzad, et al.         Expires 5 September 2024               [Page 23]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   ^[0-9A-Fa-f]{16}$

7.5.2.  Multivalued Attribute

   versionSupport

   An array of strings of all the Zigbee versions supported by the
   device.  For example, [3.0].  This attribute is required, case
   insensitive, mutable, and returned by default.

   +====================+=====+===+=======+=========+========+========+
   | Attribute          |Multi|Req| Case  | Mutable | Return | Unique |
   |                    |Value|   | Exact |         |        |        |
   +====================+=====+===+=======+=========+========+========+
   | deviceEui64Address |F    |T  | F     | RW      | Def    | None   |
   +--------------------+-----+---+-------+---------+--------+--------+
   | versionSupport     |T    |T  | F     | RW      | Def    | None   |
   +--------------------+-----+---+-------+---------+--------+--------+

     Table 6: Characteristics of Zigbee extension schema attributes.
     (Req = Required, T = True, F = False, RW = ReadWrite, and Def =
                                 Default)

   An example of a device object with Zigbee extension is shown below:

   <CODE BEGINS>
   {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
        "urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device"],

     "id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
     "displayName": "Zigbee Heart Monitor",
     "adminState": true,
     "urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device" : {
       "versionSupport": ["3.0"],
       "deviceEui64Address": "50325FFFFEE76728"
     },

     "meta": {
       "resourceType": "Device",
         "created": "2022-01-23T04:56:22Z",
       "lastModified": "2022-05-13T04:42:34Z",
       "version": "W\/\"a330bc54f0671c9\"",
       "location": "https://example.com/v2/Device/e9e30dba-f08f-4109
          -8486-d5c6a3316111"
     }
   }
   <CODE ENDS>



Shahzad, et al.         Expires 5 September 2024               [Page 24]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   The schema for the Zigbee extension is presented in JSON format in
   Section Section 8.8, while the openAPI representation is provided in
   Section Appendix B.7.

7.6.  The Endpoint Applications Extension Schema

   Sometimes non-IP devices such as those using BLE or Zigbee require an
   application gateway interface to manage them.  SCIM clients MUST NOT
   specify this to describe native IP-based devices.

   endpointAppsExt provides the list application that connect to
   enterprise gateway.  The endpointAppsExt has one multivalued
   attribute and two singular attributes.  The extension is identified
   using the following schema URI:

   urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0:Device

7.6.1.  Singular Attributes

   deviceControlEnterpriseEndpoint

   Device control apps use this URL of the enterprise endpoint to reach
   the enterprise gateway.  When the enterprise receives the SCIM object
   from the onboarding app, it adds this attribute to it and sends it
   back as a response to the onboarding app.  This attribute is
   required, case-sensitive, mutable, and returned by default.  The
   uniqueness is enforced by the enterprise.

   telemetryEnterpriseEndpoint

   Telemetry apps use this URL of the enterprise endpoint to reach the
   enterprise gateway.  When the enterprise receives the SCIM object
   from the onboarding app, it adds this attribute to it and sends it
   back as a response to the onboarding app.  This attribute is
   required, case-sensitive, mutable, and returned by default.  The
   uniqueness is enforced by the enterprise.

7.6.2.  Multivalued Attribute

   applications

   This is a complex multivalued attribute.  It represents a list of
   endpoint applications i.e., deviceControl and telemetry.  Each entry
   in the list comprises two attributes including "value" and "$ref".

   value





Shahzad, et al.         Expires 5 September 2024               [Page 25]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   It is the identifier of the endpoint application formated as UUID.
   It is same as the common attribute "$id" of the resource
   "endpointApp".  It is readOnly, required, case insensitive and
   returned by default.

   $ref

   It is the reference to the respective endpointApp resource object
   stored in the SCIM server.  It is readOnly, required, case sensitive
   and returned by default.

   +====================+=====+===+=======+=========+========+========+
   | Attribute          |Multi|Req| Case  | Mutable | Return | Unique |
   |                    |Value|   | Exact |         |        |        |
   +====================+=====+===+=======+=========+========+========+
   | devContEntEndpoint |F    |T  | T     | R       | Def    | Ent    |
   +--------------------+-----+---+-------+---------+--------+--------+
   | telEntEndpoint     |F    |T  | T     | R       | Def    | Ent    |
   +--------------------+-----+---+-------+---------+--------+--------+
   | applications       |T    |T  | F     | RW      | Def    | None   |
   +--------------------+-----+---+-------+---------+--------+--------+
   | value              |F    |T  | F     | R       | Def    | None   |
   +--------------------+-----+---+-------+---------+--------+--------+
   | $ref               |F    |T  | F     | R       | Def    | None   |
   +--------------------+-----+---+-------+---------+--------+--------+

       Table 7: Characteristics of EndpointAppsExt extension schema
           attributes.  DevContEntEndpoint represents attribute
      deviceControlEnterpriseEndpoint and telEntEndpoint represents
       telemetryEnterpriseEndpoint.  (Req = Required, T = True, F =
     False, R = ReadOnly, RW = ReadWrite, Ent = Enterprise, and Def =
                                Default).

   An example of a device object with endpointAppsExt extension is
   below:

   <CODE BEGINS>
   {
     "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device",
        "urn:ietf:params:scim:schemas:extension:ble:2.0:Device",
        "urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0
           :Device"],
     "id": "e9e30dba-f08f-4109-8486-d5c6a3316111",
     "deviceDisplayName": "BLE Heart Monitor",
     "adminState": true,
     "urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : {
       "versionSupport": ["5.3"],
       "deviceMacAddress": "2C:54:91:88:C9:E2",



Shahzad, et al.         Expires 5 September 2024               [Page 26]

Internet-Draft        SCIM Device Schema Extensions           March 2024


       "isRandom": false,
       "separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77
          :22:12"],
       "mobility": false,
       "pairingMethods": [
           "urn:ietf:params:scim:schemas:extension:pairingNull:2.0
              :Device",
           "urn:ietf:params:scim:schemas:extension:pairingJustWorks
              :2.0:Device",
           "urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0
              :Device",
           "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0
              :Device"],
       "urn:ietf:params:scim:schemas:extension:pairingNull:2.0:Device"
          : null,
       "urn:ietf:params:scim:schemas:extension:pairingJustWorks:2.0
          :Device": {
         "key": null
       },
       "urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0
          :Device" : {
         "key": 123456
       },
       "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device":
           {
         "key": "TheKeyvalueRetrievedFromOOB",
         "randNumber": 238796813516896
       }
     },

     "urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0
        :Device": {

       "applications": [
         {
           "value" : "e9e30dba-f08f-4109-8486-d5c6a3316212",
           "$ref" : "https://example.com/v2/EndpointApp/e9e30dba-f08f
              -4109-8486-d5c6a3316212"
         },
         {
           "value" : "e9e30dba-f08f-4109-8486-d5c6a3316333",
           "$ref" : "https://example.com/v2/EndpointApp/e9e30dba-f08f
              -4109-8486-d5c6a3316333"
         }
       ],
       "deviceControlEnterpriseEndpoint":
           "https//enterprise.com/device_control_app_endpoint/",
       "telemetryEnterpriseEndpoint":



Shahzad, et al.         Expires 5 September 2024               [Page 27]

Internet-Draft        SCIM Device Schema Extensions           March 2024


           "https//enterprise.com/telemetry_app_endpoint/"
     },


     "meta": {
       "resourceType": "Device",
         "created": "2022-01-23T04:56:22Z",
       "lastModified": "2022-05-13T04:42:34Z",
       "version": "W\/\"a330bc54f0671c9\"",
       "location": "https://example.com/v2/Device/e9e30dba-f08f-4109
          -8486-d5c6a3316111"
     }
   }
   <CODE ENDS>

   The schema for the endpointAppsExt extension along with BLE extension
   is presented in JSON format in Section Section 8.9, while the openAPI
   representation is provided in Section Appendix B.8.

8.  Schema JSON Representation

8.1.  Resource Schema

   <CODE BEGINS>
   [
     {
       "schemas": ["urn:ietf:params:scim:schemas:core:2.0
          :ResourceType"],
       "id": "Device",
       "name": "Device",
       "endpoint": "/Device",
       "description": "Device Account",
       "schema": "urn:ietf:params:scim:schemas:core:2.0:Device",
       "schemaExtensions": [
         {
           "schema": "urn:ietf:params:scim:schemas:extension:ble:2.0
              :Device",
           "required": false
         },
         {
           "schema": "urn:ietf:params:scim:schemas:extension:dpp:2.0
              :Device",
           "required": false
         },
         {
           "schema": "urn:ietf:params:scim:schemas:extension:zigbee
              :2.0:Device",
           "required": false



Shahzad, et al.         Expires 5 September 2024               [Page 28]

Internet-Draft        SCIM Device Schema Extensions           March 2024


         },
         {
           "schema": "urn:ietf:params:scim:schemas:extension
              :endpointApps:2.0:Device",
           "required": false
         },
         {
           "schema": "urn:ietf:params:scim:schemas:extension
              :pairingNull:2.0:Device",
           "required": false
         },
         {
           "schema": "urn:ietf:params:scim:schemas:extension
              :pairingJustWorks:2.0:Device",
           "required": false
         },
         {
           "schema": "urn:ietf:params:scim:schemas:extension
              :pairingPassKey:2.0:Device",
           "required": false
         },
         {
           "schema": "urn:ietf:params:scim:schemas:extension
              :pairingOOB:2.0:Device",
           "required": false
         }
       ],
       "meta": {
         "location": "https://example.com/v2/ResourceTypes/Device",
         "resourceType": "ResourceType"
       }
     },
     {
       "schemas": ["urn:ietf:params:scim:schemas:core:2.0
          :ResourceType"],
       "id": "EndpointApp",
       "name": "EndpointApp",
       "endpoint": "/EndpointApp",
       "description": "Endpoint application such as device control and
           telemetry.",
       "schema": "urn:ietf:params:scim:schemas:core:2.0:EndpointApp",
       "meta": {
         "location": "https
            ://example.com/v2/ResourceTypes/EndpointApp",
         "resourceType": "ResourceType"
       }
     }
   ]



Shahzad, et al.         Expires 5 September 2024               [Page 29]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE ENDS>

8.2.  Device Core Schema JSON

   <CODE BEGINS>
   {
     "id": "urn:ietf:params:scim:schemas:core:2.0:Device",
     "name": "Device",
     "description": "Device account",
     "attributes" : [
       {
         "name": "deviceDisplayName",
         "type": "string",
         "description": "Human readable name of the device, suitable
             for displaying to end-users. For example, 'BLE Heart
             Monitor' etc.",
         "multivalues": false,
         "required": false,
         "caseExact": false,
         "mutability": "readWrite",
         "returned": "default",
         "uniqueness": "none"
       },
       {
         "name": "adminState",
         "type": "boolean",
         "description": "A mutable boolean value indicating the device
             administrative status. If set TRUE, the commands (such as
             connect, disconnect, subscribe) that control app sends to
             the controller for the devices will be processeed by the
             controller. If set FALSE, any command comming from the
             control app for the device will be rejected by the
             controller.",
         "multivalues": false,
         "required": true,
         "caseExact": false,
         "mutability": "readWrite",
         "returned": "default",
         "uniqueness": "none"
       },
       {
         "name": "mudUrl",
         "type": "reference",
         "description": "A URL to MUD file of the device (RFC 8520).",
         "multivalues": false,
         "required": false,
         "caseExact": true,
         "mutability": "readWrite",



Shahzad, et al.         Expires 5 September 2024               [Page 30]

Internet-Draft        SCIM Device Schema Extensions           March 2024


         "returned": "default",
         "uniqueness": "none"
       }
     ],
     "meta" : {
       "resourceType" : "Schema",
       "location" :
         "/v2/Schemas/urn:ietf:params:scim:schemas:core:2.0:Device"
     }
   }
   <CODE ENDS>

8.3.  EndpointApp Schema JSON

   <CODE BEGINS>
   {
     "id": "urn:ietf:params:scim:schemas:core:2.0:EndpointApp",
     "name": "EndpointApp",
     "description": "Endpoint application and their credentials",
     "attributes" : [
       {
         "name": "applicationType",
         "type": "string",
         "description": "This attribute will only contain two values;
             'deviceControl' or 'telemetry'.",
         "multivalues": false,
         "required": true,
         "caseExact": false,
         "mutability": "readOnly",
         "returned": "default",
         "uniqueness": "none"
       },
       {
         "name": "applicationName",
         "type": "string",
         "description": "Human readable name of the application.",
         "multivalues": false,
         "required": true,
         "caseExact": false,
         "mutability": "readWrite",
         "returned": "default",
         "uniqueness": "none"
       },
       {
         "name": "certificateInfo",
         "type": "complex",
         "description": "Contains x509 certificate's subject name and
             root CA information associated with the device control or



Shahzad, et al.         Expires 5 September 2024               [Page 31]

Internet-Draft        SCIM Device Schema Extensions           March 2024


             telemetry app.",
         "multivalues": false,
         "required": false,
         "caseExact": false,
         "mutability": "readWrite",
         "returned": "default",
         "uniqueness": "none",
         "subAttributes" : [
           {
             "name" : "rootCN",
             "type" : "string",
             "description" : "A root certificate common name.",
             "multiValued" : false,
             "required" : true,
             "caseExact" : true,
             "mutability" : "readOnly",
             "returned" : "default",
             "uniqueness" : "none"
           },
           {
             "name" : "subjectName",
             "type" : "string",
             "description" : "Also known as the Common Name (CN), the
                 Subject Name is a field in the X.509 certificate that
                 identifies the primary domain or IP address for which
                 the certificate is issued.",
             "multiValued" : false,
             "required" : false,
             "caseExact" : true,
             "mutability" : "readOnly",
             "returned" : "default",
             "uniqueness" : "none"
           },
           {
             "name" : "subjectAlternativeName",
             "type" : "string",
             "description" : "This attribute allows for the inclusion
                 of multiple domain names and IP addresses in a single
                 certificate. This enables the certificate to be used
                 for multiple related domains or IPs without the need
                 for separate certificates for each.",
             "multiValued" : true,
             "required" : false,
             "caseExact" : true,
             "mutability" : "readOnly",
             "returned" : "default",
             "uniqueness" : "none"
           }



Shahzad, et al.         Expires 5 September 2024               [Page 32]

Internet-Draft        SCIM Device Schema Extensions           March 2024


         ]
       },
       {
         "name": "clientToken",
         "type": "string",
         "description": "This attribute contains a token that the
             client will use to authenticate itself.  Each token may
             be a string up to 500 characters in length.",
         "multivalues": false,
         "required": false,
         "caseExact": true,
         "mutability": "readOnly",
         "returned": "default",
         "uniqueness": "none"
       }
     ],
     "meta" : {
       "resourceType" : "Schema",
       "location" :
         "/v2/Schemas/urn:ietf:params:scim:schemas:core:2.0:Device"
     }
   }
   <CODE ENDS>

8.4.  BLE Extension Schema JSON

   <CODE BEGINS>
   [
     {
       "id": "urn:ietf:params:scim:schemas:extension:ble:2.0:Device",
       "name": "bleExtension",
       "description": "Ble extension for device account",
       "attributes" : [
         {
           "name": "versionSupport",
           "type": "string",
           "description": "Provides a list of all the BLE versions
               supported by the device. For example, [4.1, 4.2, 5.0,
               5.1, 5.2, 5.3].",
           "multivalues": true,
           "required": true,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "deviceMacAddress",



Shahzad, et al.         Expires 5 September 2024               [Page 33]

Internet-Draft        SCIM Device Schema Extensions           March 2024


           "type": "string",
           "description": "It is the public MAC address assigned by
               the manufacturer. It is unique 48 bit value. The regex
               pattern is ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.",
           "multivalues": false,
           "required": true,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "Manufacturer"
         },
         {
           "name": "isRandom",
           "type": "boolean",
             "description": "The isRandom flag is taken from the BLE
                 core specifications 5.3. If TRUE, device is using
                 Random address which is resolved using IRK.  If not
                 present, the value is FALSE.",
           "multivalues": false,
           "required": false,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "separateBroadcastAddress",
           "type": "string",
           "description": "When present, this address is used for
               broadcasts/advertisements.  This value MUST NOT be set
               when an IRK is provided.  Its form is the same as
               deviceMa`cAddress.",
           "multivalues": true,
           "required": false,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "irk",
           "type": "string",
           "description": "Identity resolving key, which is unique for
               every device. It is used to resolve random address.
               This value MUST NOT be set when
               separateBroadcastAddress is set.",
           "multivalues": false,
           "required": false,



Shahzad, et al.         Expires 5 September 2024               [Page 34]

Internet-Draft        SCIM Device Schema Extensions           March 2024


           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "Manufacturer"
         },
         {
           "name": "mobility",
           "type": "bool",
           "description": "If set to True, the BLE device will
               automatically connect to the closest AP. For example,
               BLE device is connected with AP-1 and moves out of
               range but comes in range of AP-2, it will be
               disconnected with AP-1 and connects with AP-2.",
           "multivalues": false,
           "required": false,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "pairingMethods",
           "type": "string",
           "description": "List of pairing methods associated with the
               ble device, stored as schema URI.",
           "multivalues": true,
           "required": true,
           "caseExact": true,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         }
       ],
       "meta" : {
         "resourceType" : "Schema",
         "location" : "/v2/Schemas/urn:ietf:params:scim:schemas
            :extension:ble:2.0:Device"
       }
     },
     {
       "id": "urn:ietf:params:scim:schemas:extension:pairingNull:2.0
          :Device",
       "name": "nullPairing",
       "description": "Null pairing method for ble. It is included for
           the devices that do not have a pairing method.",
       "meta" : {
         "resourceType" : "Schema",
         "location" : "/v2/Schemas/urn:ietf:params:scim:schemas



Shahzad, et al.         Expires 5 September 2024               [Page 35]

Internet-Draft        SCIM Device Schema Extensions           March 2024


            :extension:pairingNull:2.0:Device"
       }
     },
     {
       "id": "urn:ietf:params:scim:schemas:extension:pairingJustWorks
          :2.0:Device",
       "name": "pairingJustWorks",
       "description": "Just works pairing method for ble.",
       "attributes" : [
         {
           "name": "key",
           "type": "integer",
           "description": "Just works does not have any key value. For
               completeness, it is added with a key value 'null'.",
           "multivalues": false,
           "required": true,
           "caseExact": false,
           "mutability": "immutable",
           "returned": "default",
           "uniqueness": "none"
         }
       ],
       "meta" : {
         "resourceType" : "Schema",
         "location" : "/v2/Schemas/urn:ietf:params:scim:schemas
            :extension:pairingJustWorks:2.0:Device"
       }
     },
     {
       "id": "urn:ietf:params:scim:schemas:extension:pairingPassKey
          :2.0:Device",
       "name": "pairingPassKey",
       "description": "Pass key pairing method for ble.",
       "attributes" : [
         {
           "name": "key",
           "type": "integer",
           "description": "A six digit passkey for ble device. The
               pattern of key is ^[0-9]{6}$.",
           "multivalues": false,
           "required": true,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         }
       ],
       "meta" : {



Shahzad, et al.         Expires 5 September 2024               [Page 36]

Internet-Draft        SCIM Device Schema Extensions           March 2024


         "resourceType" : "Schema",
         "location" : "/v2/Schemas/urn:ietf:params:scim:schemas
            :extension:pairingPassKey:2.0:Device"
       }
     },
     {
       "id": "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0
          :Device",
       "name": "pairingOOB",
       "description": "Pass key pairing method for ble.",
       "attributes" : [
         {
           "name": "key",
           "type": "string",
           "description": "A key value retrieved from out of band
               source such as NFC.",
           "multivalues": false,
           "required": true,
           "caseExact": true,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "randomNumber",
           "type": "integer",
           "description": "Nonce added to the key.",
           "multivalues": false,
           "required": true,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "confirmationNumber",
           "type": "integer",
           "description": "Some solutions require confirmation number
               in RESTful message exchange.",
           "multivalues": false,
           "required": false,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         }
       ],
       "meta" : {



Shahzad, et al.         Expires 5 September 2024               [Page 37]

Internet-Draft        SCIM Device Schema Extensions           March 2024


         "resourceType" : "Schema",
         "location" : "/v2/Schemas/urn:ietf:params:scim:schemas
            :extension:pairingOOB:2.0:Device"
       }
     }
   ]
   <CODE ENDS>

8.5.  DPP Extension Schema JSON

   <CODE BEGINS>
   {
       "id": "urn:ietf:params:scim:schemas:extension:dpp:2.0:Device",
       "name": "dppExtension",
       "description": "Device extension schema for DPP",
       "attributes" : [
         {
           "name": "dppVersion",
           "type": "integer",
           "description": "Version of DPP this device supports.",
           "multivalues": false,
           "required": true,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "bootstrappingMethod",
           "type": "string",
           "description": "The list of all the bootstrapping methods
               available on the enrollee device. For example, [QR,
               NFC].",
           "multivalues": true,
           "required": false,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "bootstrapKey",
           "type": "string",
           "description": "This key is Elliptic-Curve Diffie–Hellman
              (ECDH) public key. The base64 encoded length for P-256,
               P-384, and P-521 is 80, 96, and 120 characters.",
           "multivalues": false,
           "required": true,



Shahzad, et al.         Expires 5 September 2024               [Page 38]

Internet-Draft        SCIM Device Schema Extensions           March 2024


           "caseExact": true,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "deviceMacAddress",
           "type": "string",
           "description": "The MAC address assigned by the
               manufacturer. It is unique 48 bit value. The regex
               pattern is ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.",
           "multivalues": false,
           "required": false,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "Manufacturer"
         },
         {
           "name": "classChannel",
           "type": "string",
           "description": "A list of global operating class and
               channel shared as bootstrapping information. It is
               formatted as class/channel. For example, '81/1',
               '115/36'.",
           "multivalues": true,
           "required": false,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         },
         {
           "name": "serialNumber",
           "type": "string",
           "description": "An alphanumeric serial number that may also
               be passed as bootstrapping information.",
           "multivalues": false,
           "required": false,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "none"
         }

       ],
       "meta" : {
         "resourceType" : "Schema",



Shahzad, et al.         Expires 5 September 2024               [Page 39]

Internet-Draft        SCIM Device Schema Extensions           March 2024


         "location" : "/v2/Schemas/urn:ietf:params:scim:schemas
            :extension:dpp:2.0:Device"
       }
     }
   <CODE ENDS>

8.6.  Ethernet MAB Extension Schema JSON

   <CODE BEGINS>
   {
     "id": "urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0
        :Device",
     "name": "ethernetMabExtension",
     "description": "Device extension schema for MAC authentication
         Bypass.",
     "attributes" : [
         {
           "name": "deviceMacAddress",
           "type": "string",
           "description": "A MAC address assigned by the manufacturer.
               It is unique 48 bit value. The regex pattern is ^[0-9A
              -Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.",
           "multivalues": false,
           "required": true,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "Manufacturer"
         }
     ],
     "meta" : {
       "resourceType" : "Schema",
       "location" : "/v2/Schemas/urn:ietf:params:scim:schemas
          :extension:ethernet-mab:2.0:Device"
     }
   }
   <CODE ENDS>

8.7.  FDO Extension Schema JSON












Shahzad, et al.         Expires 5 September 2024               [Page 40]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   {
     "id": "urn:ietf:params:scim:schemas:extension:fido-device-onboard
        :2.0:Device",
     "name": "FDOExtension",
     "description": "Device extension schema for Fido Device Onboard.",
     "attributes" : [
         {
           "name": "fdoVoucher",
           "type": "string",
           "description": "A Fido Voucher as Defined in the FDO
               specification"
           "multivalues": false,
           "required": true,
           "caseExact": false,
           "mutability": "readWrite",
           "returned": "default",
           "uniqueness": "Manufacturer"
         }
     ],
     "meta" : {
       "resourceType" : "Schema",
       "location" : "/v2/Schemas/urn:ietf:params:scim:schemas
          :extension:fido-device-onboard:2.0:Device"
     }
   }
   <CODE ENDS>

8.8.  Zigbee Extension Schema JSON






















Shahzad, et al.         Expires 5 September 2024               [Page 41]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   {
     "id": "urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device",
     "name": "zigbeeExtension",
     "description": "Device extension schema for zigbee.",
     "attributes" : [
       {
         "name": "versionSupport",
         "type": "string",
         "description": "Provides a list of all the zigbee versions
             supported by the device. For example, [3.0].",
         "multivalues": true,
         "required": true,
         "caseExact": false,
         "mutability": "readWrite",
         "returned": "default",
         "uniqueness": "none"
       },
       {
         "name": "deviceEui64Address",
         "type": "string",
         "description": "The EUI-64 (Extended Unique Identifier)
             device address. The regex pattern is ^[0-9A-Fa-f]{16}$.",
         "multivalues": false,
         "required": true,
         "caseExact": false,
         "mutability": "readWrite",
         "returned": "default",
         "uniqueness": "none"
       }
     ],
     "meta" : {
       "resourceType" : "Schema",
       "location" : "/v2/Schemas/urn:ietf:params:scim:schemas
          :extension:zigbee:2.0:Device"
     }
   }
   <CODE ENDS>

8.9.  EndpointAppsExt JSON Extension Schema

   <CODE BEGINS>
   {
     "id": "urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0
        :Device",
     "name": "endpointAppsExt",
     "description": "Extension for partner endpoint applications that
         can onboard, control, and communicate with the device.",



Shahzad, et al.         Expires 5 September 2024               [Page 42]

Internet-Draft        SCIM Device Schema Extensions           March 2024


     "attributes" : [
       {
         "name": "applications",
         "type": "complex",
         "description": "Includes references to two types of
             application that connect with entrprise, i.e.,
             deviceControl and telemetry.",
         "multivalues": true,
         "required": true,
         "caseExact": false,
         "mutability": "readWrite",
         "returned": "default",
         "uniqueness": "none",
         "subAttributes" : [
           {
             "name" : "value",
             "type" : "string",
             "description" : "The identifier of the endpointApp.",
             "multiValued" : false,
             "required" : true,
             "caseExact" : false,
             "mutability" : "readOnly",
             "returned" : "default",
             "uniqueness" : "none"
           },
           {
             "name" : "$ref",
             "type" : "reference",
             "referenceTypes" : "EndpointApps",
             "description" : "The URI of the corresponding
                 'EndpointApp' resource which will control or obtain
                 data from the device.",
             "multiValued" : false,
             "required" : false,
             "caseExact" : true,
             "mutability" : "readOnly",
             "returned" : "default",
             "uniqueness" : "none"
           }
         ]
       },
       {
         "name": "deviceControlEnterpriseEndpoint",
         "type": "reference",
         "description": "The URL of the enterprise endpoint which
             device control apps use to reach enterprise network
             gateway.",
         "multivalues": false,



Shahzad, et al.         Expires 5 September 2024               [Page 43]

Internet-Draft        SCIM Device Schema Extensions           March 2024


         "required": true,
         "caseExact": true,
         "mutability": "readOnly",
         "returned": "default",
         "uniqueness": "Enterprise"
       },
       {
         "name": "telemetryEnterpriseEndpoint",
         "type": "reference",
         "description": "The URL of the enterprise endpoint which
             telemetry apps use to reach enterprise network gateway.",
         "multivalues": false,
         "required": true,
         "caseExact": true,
         "mutability": "readOnly",
         "returned": "default",
         "uniqueness": "Enterprise"
       }
     ],
     "meta" : {
       "resourceType" : "Schema",
       "location" : "/v2/Schemas/urn:ietf:params:scim:schemas
          :extension:endpointAppsExt:2.0:Device"
     }
   }
   <CODE ENDS>

9.  Security Considerations

   Because provisioning operations are senstive, each client must be
   appropriately authenticated.  Certain objects may be read-only or not
   visible based on who is connected.

   Devices provisioned with this model may be completely controlled by
   the administrator of the SCIM server, depending on how those systems
   are defined.  For instance, if BLE passkeys are provided, the device
   can be connected to, and perhaps paired with.  Any additional
   security must be provided at higher application layers.  For example,
   if client applications wish to keep private information to and from
   the device, they should encrypt that information over-the-top.

10.  IANA Considerations

   The IANA is requested to add the following additions to the "SCIM
   Schema URIs for Data Resources" registry as follows:






Shahzad, et al.         Expires 5 September 2024               [Page 44]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   +============================================+============+=========+
   |URN                                         |Name        |Reference|
   +============================================+============+=========+
   |urn:ietf:params:scim:schemas:core:2.0:Device|Core Device |This memo|
   |                                            |Schema      |         |
   +--------------------------------------------+------------+---------+
   |urn:ietf:params:scim:schemas:extension:     |BLE         |This memo|
   |ble:2.0:Device                              |Extension   |         |
   +--------------------------------------------+------------+---------+
   |urn:ietf:params:scim:schemas:extension:     |Ethernet MAB|This memo|
   |ethernet-mab:2.0:Device                     |            |         |
   +--------------------------------------------+------------+---------+
   |urn:ietf:params:scim:schemas:extension:     |Fido Device |This memo|
   |fido-device-onboard:2.0:Device              |Onboard     |         |
   +--------------------------------------------+------------+---------+
   |urn:ietf:params:scim:schemas:extension:     |Device      |This memo|
   |dpp:2.0:Device                              |Provisioning|         |
   |                                            |Protocol    |         |
   +--------------------------------------------+------------+---------+
   |urn:ietf:params:scim:schemas:extension:     |Application |This memo|
   |endpointAppsExt:2.0:Device                  |Endpoint    |         |
   |                                            |Extension   |         |
   +--------------------------------------------+------------+---------+
   |urn:ietf:params:scim:schemas:extension:     |Just Works  |This memo|
   |pairingJustWorks:2.0:Device                 |Auth BLE    |         |
   +--------------------------------------------+------------+---------+
   |urn:ietf:params:scim:schemas:extension:     |Out of Band |This memo|
   |pairingOOB:2.0:Device                       |Pairing for |         |
   |                                            |BLE         |         |
   +--------------------------------------------+------------+---------+
   |urn:ietf:params:scim:schemas:extension:     |Passkey     |This memo|
   |pairingPassKey:2.0:Device                   |Pairing for |         |
   |                                            |BLE         |         |
   +--------------------------------------------+------------+---------+

                                  Table 8

   Note that the line break in URNs should be removed, as should this
   comment.

11.  References

11.1.  Normative References

   [BLE53]    Bluetooth SIG, "Bluetooth Core Specification, Version
              5.3", 2021.





Shahzad, et al.         Expires 5 September 2024               [Page 45]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   [DPP2]     Wi-Fi Alliance, "Wi-Fi Easy Connect Specification, Version
              2.0", 2020.

   [FDO11]    FIDO Alliance, "FIDO Device Onboading Specification 1.1",
              April 2022.

   [I-D.bhutton-json-schema]
              Wright, A., Andrews, H., Hutton, B., and G. Dennis, "JSON
              Schema: A Media Type for Describing JSON Documents", Work
              in Progress, Internet-Draft, draft-bhutton-json-schema-01,
              10 June 2022, <https://datatracker.ietf.org/doc/html/
              draft-bhutton-json-schema-01>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/rfc/rfc2119>.

   [RFC7643]  Hunt, P., Ed., Grizzle, K., Wahlstroem, E., and C.
              Mortimore, "System for Cross-domain Identity Management:
              Core Schema", RFC 7643, DOI 10.17487/RFC7643, September
              2015, <https://www.rfc-editor.org/rfc/rfc7643>.

   [RFC7644]  Hunt, P., Ed., Grizzle, K., Ansari, M., Wahlstroem, E.,
              and C. Mortimore, "System for Cross-domain Identity
              Management: Protocol", RFC 7644, DOI 10.17487/RFC7644,
              September 2015, <https://www.rfc-editor.org/rfc/rfc7644>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/rfc/rfc8174>.

   [RFC8520]  Lear, E., Droms, R., and D. Romascanu, "Manufacturer Usage
              Description Specification", RFC 8520,
              DOI 10.17487/RFC8520, March 2019,
              <https://www.rfc-editor.org/rfc/rfc8520>.

11.2.  Informative References

   [I-D.brinckman-nipc]
              Brinckman, B., Mohan, R., and B. Sanford, "An Application
              Layer Interface for Non-IP device control (NIPC)", Work in
              Progress, Internet-Draft, draft-brinckman-nipc-00, 20
              October 2023, <https://datatracker.ietf.org/doc/html/
              draft-brinckman-nipc-00>.






Shahzad, et al.         Expires 5 September 2024               [Page 46]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   [RFC8995]  Pritikin, M., Richardson, M., Eckert, T., Behringer, M.,
              and K. Watsen, "Bootstrapping Remote Secure Key
              Infrastructure (BRSKI)", RFC 8995, DOI 10.17487/RFC8995,
              May 2021, <https://www.rfc-editor.org/rfc/rfc8995>.

Appendix A.  Changes from Earlier Versions

   Draft -03: * Add MAB, FDO * Some grammar improvements * fold OpenAPI
   * IANA considerations

   Draft -02: * Clean up examples * Move openapi to appendix Draft -01:

   *  Doh!  We forgot the core device scheme!

   Draft -00:

   *  Initial revision

Appendix B.  OpenAPI representation

   The following sections are provided for informational purposes.

B.1.  Device Core Schema OpenAPI Representation

   OpenAPI representation of device core schema is as follows:

   <CODE BEGINS>
   components:
     schemas:
       Device:
         title: Device
         description: Device account
         type: object
         properties:
           deviceDisplayName:
             type: string
             description: "Human readable name of the device, suitable
                           for displaying to end-users. For example,
                          'BLE Heart Monitor' etc."
             nullable: true
             readOnly: false
             writeOnly: false
           adminState:
             type: boolean
             description: A mutable boolean value indicating the device
                          administrative status. If set TRUE, the
                          commands (such as connect, disconnect,
                          subscribe) that control app sends to the



Shahzad, et al.         Expires 5 September 2024               [Page 47]

Internet-Draft        SCIM Device Schema Extensions           March 2024


                          controller for the devices will be processeed
                          by the controller.  If set FALSE, any command
                          comming from the control app for the device
                          will be rejected by the controller.
             nullable: false
             readOnly: false
             writeOnly: false
           mudUrl:
             type: string
             format: uri
             description: A URL to MUD file of the device (RFC 8520).
                 It
                          is added for future use. Current usage is not
                          defined yet.
             nullable: true
             readOnly: false
             writeOnly: false
         required:
           - adminState
         additionalProperties: false
         allOf:
           - $ref: '#/components/schemas/CommonAttributes'
       CommonAttributes:
         type: object
         properties:
           schemas:
             type: array
             items:
               type: string
               enum:
                 - urn:ietf:params:scim:schemas:core:2.0:Device
             description: The list of schemas that define the resource.
             nullable: false
           id:
             type: string
             format: uri
             description: The unique identifier for a resource.
             nullable: false
             readOnly: true
             writeOnly: false
           externalId:
             type: string
             description: An identifier for the resource that is
                 defined
                          by the provisioning client.
             nullable: true
             readOnly: false
             writeOnly: false



Shahzad, et al.         Expires 5 September 2024               [Page 48]

Internet-Draft        SCIM Device Schema Extensions           March 2024


           meta:
             type: object
             readOnly: true
             properties:
               resourceType:
                 type: string
                 description: The name of the resource type of the
                              resource.
                 nullable: false
                 readOnly: true
                 writeOnly: false
               location:
                 type: string
                 format: uri
                 description: The URI of the resource being returned.
                 nullable: false
                 readOnly: true
                 writeOnly: false
               created:
                 type: string
                 format: date-time
                 description: The date and time the resource was added
                              to the service provider.
                 nullable: false
                 readOnly: true
                 writeOnly: false
               lastModified:
                 type: string
                 format: date-time
                 description: The most recent date and time that the
                              details of this resource were updated at
                              the service provider.
                 nullable: false
                 readOnly: true
                 writeOnly: false
               version:
                 type: string
                 description: The version of the resource.
                 nullable: true
                 readOnly: true
                 writeOnly: false
             additionalProperties: false
   <CODE ENDS>

B.2.  EndpointApp Schema OpenAPI Representation

   OpenAPI representation of endpointApp schema is as follows:




Shahzad, et al.         Expires 5 September 2024               [Page 49]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   components:
     schemas:
       EndpointApp:
         title: EndpointApp
         description: Endpoint application resource
         type: object
         properties:
           applicationType:
             type: string
             description: "This attribute will only contain two values;
                          'deviceControl' or 'telemetry'."
             nullable: false
             readOnly: false
             writeOnly: false

           applicationName:
             type: string
             description: Human readable name of the application.
             nullable: false
             readOnly: false
             writeOnly: false

         required:
           - applicationType
           - applicationName

         additionalProperties: true
         oneOf:
           - $ref: '#/components/schemas/clientToken'
           - $ref: '#/components/schemas/certificateInfo'

         allOf:
           - $ref: '#/components/schemas/CommonAttributes'

       clientToken:
         type: string
         description: "This attribute contains a token that the client
                       will use to authenticate itself. Each token may
                       be a string up to 500 characters in length."
         nullable: true
         readOnly: true
         writeOnly: false

       certificateInfo:
         type: object
         description: "Contains x509 certificate's subject name and
                       root CA information associated with the device



Shahzad, et al.         Expires 5 September 2024               [Page 50]

Internet-Draft        SCIM Device Schema Extensions           March 2024


                       control or telemetry app."
         properties:
           rootCN:
             type: string
             description: "A root certificate common name."
             nullable: false
             readOnly: true
             writeOnly: false

           subjectName:
             type: string
             description: "Also known as the Common Name (CN), the
                           Subject Name is a field in the X.509
                           certificate that identifies the primary
                           domain or IP address for which the
                           certificate is issued."
             nullable: false
             readOnly: true
             writeOnly: false

           subjectAlternativeName:
             type: array
             items:
               type: string
             description: "This attribute allows for the inclusion of
                           multiple domain names and IP addresses in a
                           single certificate. This enables the
                           certificate to be used for multiple related
                           domains or IPs without the need for
                           separate certificates for each. "
             nullable: true
             readOnly: true
             writeOnly: false
         required:
         - rootCN

       CommonAttributes:
         type: object
         properties:
           schemas:
             type: array
             items:
               type: string
               enum:
                 - urn:ietf:params:scim:schemas:core:2.0:EndpointApp
             description: The list of schemas that define the resource.
             nullable: false
           id:



Shahzad, et al.         Expires 5 September 2024               [Page 51]

Internet-Draft        SCIM Device Schema Extensions           March 2024


             type: string
             format: uri
             description: The unique identifier for a resource.
             nullable: false
             readOnly: true
             writeOnly: false
           meta:
             type: object
             readOnly: true
             properties:
               resourceType:
                 type: string
                 description: The name of the resource type of the
                              resource.
                 nullable: false
                 readOnly: true
                 writeOnly: false
               location:
                 type: string
                 format: uri
                 description: The URI of the resource being returned.
                 nullable: false
                 readOnly: true
                 writeOnly: false
               created:
                 type: string
                 format: date-time
                 description: The date and time the resource was added
                              to the service provider.
                 nullable: false
                 readOnly: true
                 writeOnly: false
               lastModified:
                 type: string
                 format: date-time
                 description: The most recent date and time that the
                              details of this resource were updated at
                              the service provider.
                 nullable: false
                 readOnly: true
                 writeOnly: false
               version:
                 type: string
                 description: The version of the resource.
                 nullable: true
                 readOnly: true
                 writeOnly: false
             additionalProperties: false



Shahzad, et al.         Expires 5 September 2024               [Page 52]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE ENDS>

B.3.  BLE Extension Schema OpenAPI Representation

   OpenAPI representation of BLE extension schema is as follows:

   <CODE BEGINS>
   components:
     schemas:
       BleDevice:
         type: object
         description: BLE Device schema.
         properties:
           schemas:
             type: array
             items:
               type: string
               enum:
                 - urn:ietf:params:scim:schemas:extension:ble:2.0
                    :Device
           urn:ietf:params:scim:schemas:extension:ble:2.0:Device:
             $ref: '#/components/schemas/BleDeviceExtension'
             required: true
       BleDeviceExtension:
         type: object
         properties:
           versionSupport:
             type: array
             items:
               type: string
             description: Provides a list of all the BLE versions
                          supported by the device. For example,
                          [4.1, 4.2, 5.0, 5.1, 5.2, 5.3].
             nullable: false
             readOnly: false
             writeOnly: false

           deviceMacAddress:
             type: string
             description: It is the public MAC address assigned by the
                          manufacturer. It is unique 48 bit value. The
                          regex pattern is
                          ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.
             nullable: false
             readOnly: false
             writeOnly: false

           isRandom:



Shahzad, et al.         Expires 5 September 2024               [Page 53]

Internet-Draft        SCIM Device Schema Extensions           March 2024


             type: boolean
             description: AddressType flag is taken from the BLE core
                          specifications 5.3. If FALSE, the device is
                          using public MAC address. If TRUE, device is
                          using Random address which is resolved using
                          the IRK.
             nullable: false
             readOnly: false
             writeOnly: false

           separateBroadcastAddress:
             type: string
             description: "When present, this address is used for
                           broadcasts/advertisements.  This value MUST
                               NOT
                           be set when an IRK is provided.  Its form is
                           the same as deviceMa`cAddress."
             nullable: false
             readOnly: false
             writeOnly: false

           irk:
             type: string
             description: Identity resolving key, which is unique for
                          every device. It is used to resolve random
                          address.
             nullable: true
             readOnly: false
             writeOnly: false
           mobility:
             type: boolean
             description: If set to True, the BLE device will
                          automatically connect to the closest AP. For
                          example, BLE device is connected with AP-1
                              and
                          moves out of range but comes in range of AP
                             -2,
                          it will be disconnected with AP-1 and
                              connects
                          with AP-2.
             nullable: false
             readOnly: false
             writeOnly: false
           pairingMethods:
             type: array
             items:
               type: string
             description: List of pairing methods associated with the



Shahzad, et al.         Expires 5 September 2024               [Page 54]

Internet-Draft        SCIM Device Schema Extensions           March 2024


                          ble device, stored as schema URI.
             nullable: true
             readOnly: false
             writeOnly: false
           urn:ietf:params:scim:schemas:extension:pairingNull:2.0
              :Device:
             $ref: '#/components/schemas/NullPairing'
             required: false
           urn:ietf:params:scim:schemas:extension:pairingJustWorks:2.0
              :Device:
             $ref: '#/components/schemas/PairingJustWorks'
             required: false
           urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0
              :Device:
             $ref: '#/components/schemas/PairingPassKey'
             required: false
           urn:ietf:params:scim:schemas:extension:pairingOOB:2.0
              :Device:
             $ref: '#/components/schemas/PairingOOB'
             required: false
         required:
           - versionSupport
           - deviceMacAddress
           - AddressType
           - pairingMethods
         additionalProperties: false

       NullPairing:
         type: object
         properties:
           id:
             type: string
             description: The id of the null pairing schema.
             nullable: false
             readOnly: true
             writeOnly: false

       PairingJustWorks:
         type: object
         description: Just works pairing method for ble
         properties:
           key:
             type: integer
             description: Just works does not have any key value. For
                          completeness, it is added with a key value
                          'null'.
             nullable: false
             readOnly: false



Shahzad, et al.         Expires 5 September 2024               [Page 55]

Internet-Draft        SCIM Device Schema Extensions           March 2024


             writeOnly: false
         required:
           - key

       PairingPassKey:
         type: object
         description: Pass key pairing method for ble
         properties:
           key:
             type: integer
             description: A six digit passkey for ble device.
                          The pattern of key is ^[0-9]{6}$.
             nullable: false
             readOnly: false
             writeOnly: false
         required:
           - key

       PairingOOB:
         type: object
         description: Out-of-band pairing method for BLE
         properties:
           key:
             type: string
             description: The OOB key value for ble device.
             nullable: false
             readOnly: false
             writeOnly: false
           randomNumber:
             type: integer
             description: Nonce added to the key
             nullable: false
             readOnly: false
             writeOnly: false
           confirmationNumber:
             type: integer
             description: Some solutions require a confirmation number
                          in the RESTful message exchange.
             nullable: true
             readOnly: false
             writeOnly: false
         required:
           - key
           - randomNumber
   <CODE ENDS>






Shahzad, et al.         Expires 5 September 2024               [Page 56]

Internet-Draft        SCIM Device Schema Extensions           March 2024


B.4.  DPP Extension Schema OpenAPI Representation

   OpenAPI representation of DPP extension schema is as follows:

   <CODE BEGINS>
   components:
     schemas:
       DppDevice:
         type: object
         description: DPP device extension schema
         properties:
           schemas:
             type: array
             items:
               type: string
               enum:
                 - urn:ietf:params:scim:schemas:extension:dpp:2.0
                    :Device
           urn:ietf:params:scim:schemas:extension:dpp:2.0:Device:
             $ref: '#/components/schemas/DppDeviceExtension'
             required: true
       DppDeviceExtension:
         type: object
         properties:
           dppVersion:
             type: integer
             description: Version of DPP this device supports.
             nullable: false
             readOnly: false
             writeOnly: false
           bootstrappingMethod:
             type: array
             items:
               type: string
             description: The list of all the bootstrapping methods
                          available on the enrollee device. For
                          example, [QR, NFC].
             nullable: true
             readOnly: false
             writeOnly: false
           bootstrapKey:
             type: string
             description: This key is Elliptic-Curve Diffie–Hellman
                          (ECDH) public key. The base64 encoded length
                          for P-256, P-384, and P-521 is 80, 96, and
                              120
                          characters.
             nullable: false



Shahzad, et al.         Expires 5 September 2024               [Page 57]

Internet-Draft        SCIM Device Schema Extensions           March 2024


             readOnly: false
             writeOnly: false
           deviceMacAddress:
             type: string
             description: The MAC address assigned by the manufacturer.
                          The regex pattern is
                          ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.
             nullable: false
             readOnly: false
             writeOnly: false
           classChannel:
             type: array
             items:
               type: string
             description: A list of global operating class and channel
                          shared as bootstrapping information. It is
                          formatted as class/channel. For example,
                          '81/1', '115/36'.
             nullable: false
             readOnly: false
             writeOnly: false
           serialNumber:
             type: string
             description: An alphanumeric serial number that may also
                 be
                          passed as bootstrapping information.
             nullable: false
             readOnly: false
             writeOnly: false
         required:
           - dppVersion
           - bootstrapKey
         additionalProperties: false
   <CODE ENDS>

B.5.  Ethernet MAB Extension Schema OpenAPI Representation

   OpenAPI representation of Ethernet MAB extension schema is as
   follows:












Shahzad, et al.         Expires 5 September 2024               [Page 58]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   components:
     schemas:
       EthernetMABDevice:
         type: object
         description: Ethernet MAC Authenticated Bypass
         properties:
           schemas:
             type: array
             items:
               type: string
               enum:
                 - urn:ietf:params:scim:schemas:extension:ethernet-mab
                    :2.0:Device
           urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0
              :Device:
             $ref: '#/components/schemas/EthernetMABDeviceExtension'
             required: true
       EthernetMABDeviceExtension:
         type: object
         properties:
           deviceMacAddress:
             type: string
             description: It is the public MAC address assigned by the
                          manufacturer. It is unique 48 bit value. The
                          regex pattern is
                          ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.
             nullable: false
             readOnly: false
             writeOnly: false
         required:
           - deviceMacAddress
         description: Device extension schema for Ethernet-MAB
   <CODE ENDS>

B.6.  FDO Extension Schema OpenAPI Representation

   OpenAPI representation of FDO extension schema is as follows:













Shahzad, et al.         Expires 5 September 2024               [Page 59]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   components:
     schemas:
       FDODevice:
         type: object
         description: Fido Device Onboarding Voucher Extension
         properties:
           schemas:
             type: array
             items:
               type: string
               enum:
                 - urn:ietf:params:scim:schemas:extension:ethernet-mab
                    :2.0:Device
           urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0
              :Device:
             $ref: '#/components/schemas/FDODeviceExtension'
             required: true
       FDODeviceExtension:
         type: object
         properties:
           fdoVoucher:
             type: string
             description: A Fido Device Onboarding Voucher
             nullable: false
             readOnly: false
             writeOnly: false
         required:
           - fdoVoucher
         description: Device Extension for a Fido Device Onboarding
             Voucher
   <CODE ENDS>

B.7.  Zigbee Extension Schema OpenAPI Representation

   OpenAPI representation of zigbee extension schema is as follows:















Shahzad, et al.         Expires 5 September 2024               [Page 60]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   components:
     schemas:
       ZigbeeDevice:
         type: object
         description: Zigbee Device schema.
         properties:
           schemas:
             type: array
             items:
               type: string
               enum:
                 - urn:ietf:params:scim:schemas:extension:zigbee:2.0
                    :Device
           urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device:
             $ref: '#/components/schemas/ZigbeeDeviceExtension'
             required: true
       ZigbeeDeviceExtension:
         type: object
         properties:
           versionSupport:
             type: array
             items:
               type: string
             description: Provides a list of all the Zigbee versions
                          supported by the device. For example, [3.0].
             nullable: false
             readOnly: false
             writeOnly: false
           deviceEui64Address:
             type: string
             description: The EUI-64 (Extended Unique Identifier)
                 device
                          address. The regex pattern is
                          ^[0-9A-Fa-f]{16}$.
             nullable: false
             readOnly: false
             writeOnly: false
         required:
           - versionSupport
           - deviceEui64Address
         description: Device extension schema for Zigbee.
   <CODE ENDS>

B.8.  EndpointAppsExt Extension Schema OpenAPI Representation

   OpenAPI representation of endpoint Apps extension schema is as
   follows:



Shahzad, et al.         Expires 5 September 2024               [Page 61]

Internet-Draft        SCIM Device Schema Extensions           March 2024


   <CODE BEGINS>
   components:
     schemas:
       EndpointAppsExt:
         type: object
         properties:
           applications:
             $ref: '#/components/schemas/applications'

           deviceControlEnterpriseEndpoint:
             type: string
             format: url
             description: The URL of the enterprise endpoint which
                 device
                          control apps use to reach enterprise network
                          gateway.
             nullable: false
             readOnly: true
             writeOnly: false

           telemetryEnterpriseEndpoint:
             type: string
             format: url
             description: The URL of the enterprise endpoint which
                          telemetry apps use to reach enterprise
                              network
                          gateway.
             nullable: false
             readOnly: true
             writeOnly: false

         required:
           - applications
           - deviceControlEnterpriseEndpoint
           - telemetryEnterpriseEndpoint

       applications:
         type: array
         items:
           value:
             type: string
             description: The identifier of the endpointApp.
             nullable: false
             readOnly: true
             writeOnly: false
           ref:
             type: string
             format: uri



Shahzad, et al.         Expires 5 September 2024               [Page 62]

Internet-Draft        SCIM Device Schema Extensions           March 2024


             description: The URI of the corresponding 'EndpointApp'
                         resource which will control or obtain data
                             from
                         the device.
             nullable: false
             readOnly: true
             writeOnly: false
         required:
           - value
           - ref
   <CODE ENDS>

Authors' Addresses

   Muhammad Shahzad
   North Carolina State University
   Department of Computer Science
   890 Oval Drive
   Campus Box 8206
   Raleigh, NC,  27695-8206
   United States of America
   Email: mshahza@ncsu.edu


   Hassan Iqbal
   North Carolina State University
   Department of Computer Science
   890 Oval Drive
   Campus Box 8206
   Raleigh, NC,  27695-8206
   United States of America
   Email: hassaniqbal931@gmail.com


   Eliot Lear
   Cisco Systems
   Richtistrasse 7
   CH-8304 Wallisellen
   Switzerland
   Phone: +41 44 878 9200
   Email: lear@cisco.com










Shahzad, et al.         Expires 5 September 2024               [Page 63]