Internet DRAFT - draft-ietf-tls-record-limit

draft-ietf-tls-record-limit







TLS                                                           M. Thomson
Internet-Draft                                                   Mozilla
Updates: 6066 (if approved)                                 May 17, 2018
Intended status: Standards Track
Expires: November 18, 2018


     Record Size Limit Extension for Transport Layer Security (TLS)
                     draft-ietf-tls-record-limit-03

Abstract

   An extension to Transport Layer Security (TLS) is defined that allows
   endpoints to negotiate the maximum size of protected records that
   each will send the other.

   This replaces the maximum fragment length extension defined in RFC
   6066.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 18, 2018.

Copyright Notice

   Copyright (c) 2018 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of



Thomson                 Expires November 18, 2018               [Page 1]

Internet-Draft              TLS Record Limit                    May 2018


   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Conventions and Definitions . . . . . . . . . . . . . . . . .   3
   3.  Limitations of the "max_fragment_length" Extension  . . . . .   3
   4.  The "record_size_limit" Extension . . . . . . . . . . . . . .   4
     4.1.  Record Expansion Limits . . . . . . . . . . . . . . . . .   6
   5.  Deprecating "max_fragment_length" . . . . . . . . . . . . . .   6
   6.  Security Considerations . . . . . . . . . . . . . . . . . . .   7
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   7
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   7
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .   7
     8.2.  Informative References  . . . . . . . . . . . . . . . . .   8
   Appendix A.  Acknowledgments  . . . . . . . . . . . . . . . . . .   8
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .   8

1.  Introduction

   Implementing Transport Layer Security (TLS) [TLS] or Datagram TLS
   (DTLS) [DTLS] constrained devices can be challenging.  However,
   recent improvements to the design and implementation of cryptographic
   algorithms have made TLS accessible to some highly limited devices
   (see for example [RFC7925]).

   Receiving large protected records can be particularly difficult for a
   device with limited operating memory.  TLS versions 1.2 and earlier
   [RFC5246] permit senders to generate records 16384 octets in size,
   plus any expansion from compression and protection up to 2048 octets
   (though typically this expansion is only 16 octets).  TLS 1.3 reduces
   the allowance for expansion to 256 octets.  Allocating up to 18K of
   memory for ciphertext is beyond the capacity of some implementations.

   An Authentication Encryption with Additional Data (AEAD) cipher (see
   [RFC5116]) API requires that an entire record be present to decrypt
   and authenticate it.  Similarly, other ciphers cannot produce
   authenticated data until the entire record is present.  Incremental
   processing of records could expose endpoints to the risk of forged
   data.

   The "max_fragment_length" extension [RFC6066] was designed to enable
   constrained clients to negotiate a lower record size.  However,
   "max_fragment_length" suffers from several design problems (see
   Section 3).





Thomson                 Expires November 18, 2018               [Page 2]

Internet-Draft              TLS Record Limit                    May 2018


   This document defines a "record_size_limit" extension (Section 4).
   This extension replaces "max_fragment_length" [RFC6066], which this
   document deprecates.  This extension is valid in all versions of TLS.

   A smaller protected record size is just one of many problems that a
   constrained implementation might need to address.  The
   "record_size_limit" extension only addresses the memory allocation
   problem, it does not address limits of code size, or processing and
   bandwidth capacity.

2.  Conventions and Definitions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

3.  Limitations of the "max_fragment_length" Extension

   The "max_fragment_length" extension has several limitations that make
   it unsuitable for use.

   A client that has no constraints preventing it from accepting a large
   record cannot use "max_fragment_length" without risking a reduction
   in the size of records.  The maximum value that the extension permits
   is 2^12, much smaller than the maximum record size of 2^14 that the
   protocol permits.

   For large data transfers, small record sizes can materially affect
   performance.  Every record incurs additional costs, both in the
   additional octets for record headers and for expansion due to
   encryption.  Processing more records also adds computational
   overheads that can be amortized more effectively for larger record
   sizes.  Consequently, clients that are capable of receiving large
   records could be unwilling to risk reducing performance by offering
   the extension, especially if the extension is rarely needed.

   This would not be an issue if a codepoint were available or could be
   added for fragments of 2^14 octets.  However, RFC 6066 requires that
   servers abort the handshake with an "illegal_parameter" alert if they
   receive the extension with a value they don't understand.  This makes
   it impossible to add new values to the extension without risking
   connection attempts failing.

   A server that negotiates "max_fragment_length" is required to echo
   the value selected by the client.  The server cannot request a lower




Thomson                 Expires November 18, 2018               [Page 3]

Internet-Draft              TLS Record Limit                    May 2018


   limit than the one the client offered.  This is a significant problem
   if a server is more constrained than the clients it serves.

   The "max_fragment_length" extension is also ill-suited to cases where
   the capabilities of client and server are asymmetric.  Constraints on
   record size are often receiver constraints.

   In comparison, an implementation might be able to send data
   incrementally.  Encryption does not have the same atomicity
   requirement.  Some ciphers can be encrypted and sent progressively.
   Thus, an endpoint might be willing to send more than its receive
   limit.

   If these disincentives are sufficient to discourage clients from
   deploying the "max_fragment_length" extension, then constrained
   servers are unable to limit record sizes.

4.  The "record_size_limit" Extension

   The ExtensionData of the "record_size_limit" extension is
   RecordSizeLimit:

      uint16 RecordSizeLimit;

   The value of RecordSizeLimit is the maximum size of record in octets
   that the endpoint is willing to receive.  This value is used to limit
   the size of records that are created when encoding application data
   and protected handshake message into records.

   When the "record_size_limit" extension is negotiated, an endpoint
   MUST NOT generate a protected record with plaintext that is larger
   than the RecordSizeLimit value it receives from its peer.
   Unprotected messages are not subject to this limit.

   This value is the length of the plaintext of a protected record.  The
   value includes the content type and padding added in TLS 1.3 (that
   is, the complete length of TLSInnerPlaintext).  In TLS 1.2 and
   earlier, the limit covers all input to compression and encryption,
   that is the data that ultimately produces TLSCiphertext.fragment.
   Padding added as part of encryption, such as that added by a block
   cipher, is not included in this count (see Section 4.1).

   An endpoint that supports all record sizes can include any limit up
   to the protocol-defined limit for maximum record size.  For TLS 1.2
   and earlier, that limit is 2^14 octets.  TLS 1.3 uses a limit of
   2^14+1 octets.  Higher values are currently reserved for future
   versions of the protocol that may allow larger records; an endpoint
   MUST NOT send a value higher than the protocol-defined maximum record



Thomson                 Expires November 18, 2018               [Page 4]

Internet-Draft              TLS Record Limit                    May 2018


   size unless explicitly allowed by such a future version or extension.
   A server MUST NOT enforce this restriction; a client might advertise
   a higher limit that is enabled by an extension or version the server
   does not understand.  A client MAY abort the handshake with an
   illegal_parameter alert if the record_size_limit extension includes a
   value greater than the maximum record size permitted by the
   negotiated protocol version and extensions.

   Even if a larger record size limit is provided by a peer, an endpoint
   MUST NOT send records larger than the protocol-defined limit, unless
   explicitly allowed by a future TLS version or extension.

   The record size limit only applies to records sent toward the
   endpoint that advertises the limit.  An endpoint can send records
   that are larger than the limit it advertises as its own limit.  A TLS
   endpoint that receives a record larger than its advertised limit MUST
   generate a fatal "record_overflow" alert; a DTLS endpoint that
   receives a record larger than its advertised limit MAY either
   generate a fatal "record_overflow" alert or discard the record.

   Endpoints SHOULD advertise the "record_size_limit" extension, even if
   they have no need to limit the size of records.  For clients, this
   allows servers to advertise a limit at their discretion.  For
   servers, this allows clients to know that their limit will be
   respected.  If this extension is not negotiated, endpoints can send
   records of any size permitted by the protocol or other negotiated
   extensions.

   Endpoints MUST NOT send a "record_size_limit" extension with a value
   smaller than 64.  An endpoint MUST treat receipt of a smaller value
   as a fatal error and generate an "illegal_parameter" alert.

   In TLS 1.3, the server sends the "record_size_limit" extension in the
   EncryptedExtensions message.

   During renegotiation or resumption, the record size limit is
   renegotiated.  Records are subject to the limits that were set in the
   handshake that produces the keys that are used to protect those
   records.  This admits the possibility that the extension might not be
   negotiated when a connection is renegotiated or resumed.

   The path maximum transmission unit (PMTU) in DTLS also limits the
   size of records.  The record size limit does not affect PMTU
   discovery and SHOULD be set independently.  The record size limit is
   fixed during the handshake and so is best set based on constraints at
   the endpoint and not the current network environment.  In comparison,
   the PMTU is determined by the network path and can change dynamically




Thomson                 Expires November 18, 2018               [Page 5]

Internet-Draft              TLS Record Limit                    May 2018


   over time.  See [PMTU] and Section 4.1.1.1 of [DTLS] for more detail
   on PMTU discovery.

   PMTU governs the size of UDP datagrams, which limits the size of
   records, but does not prevent records from being smaller.  An
   endpoint that sends small records is still able to send multiple
   records in a single UDP datagram.

4.1.  Record Expansion Limits

   The size limit expressed in the "record_size_limit" extension doesn't
   account for expansion due to compression or record protection.  It is
   expected that a constrained device will disable compression to avoid
   unpredictable increases in record size.  Stream ciphers and existing
   AEAD ciphers don't permit variable amounts of expansion, but block
   ciphers do permit variable expansion.

   In TLS 1.2, block ciphers allow from 1 to 256 octets of padding.
   When a limit lower than the protocol-defined limit is advertised, a
   second limit applies to the length of records that use block ciphers.
   An endpoint MUST NOT add padding to records that would cause the
   protected record to exceed the size of a protected record that
   contains the maximum amount of plaintext and the minimum permitted
   amount of padding.

   For example, TLS_RSA_WITH_AES_128_CBC_SHA has 16 octet blocks and a
   20 octet MAC.  Given a record size limit of 256, a record of that
   length would require a minimum of 11 octets of padding (for [RFC5246]
   where the MAC is covered by encryption); or 15 octets if the
   "encrypt_then_mac" extension [RFC7366] is negotiated.  With this
   limit, a record with 250 octets of plaintext could be padded to the
   same length by including at most 17 octets of padding; or 21 octets
   with "encrypt_then_mac".

   An implementation that always adds the minimum amount of padding will
   always comply with this requirement.

5.  Deprecating "max_fragment_length"

   The "record_size_limit" extension replaces the "max_fragment_length"
   extension [RFC6066].  A server that supports the "record_size_limit"
   extension MUST ignore a "max_fragment_length" that appears in a
   ClientHello if both extensions appear.  A client MUST treat receipt
   of both "max_fragment_length" and "record_size_limit" as a fatal
   error, and SHOULD generate an "illegal_parameter" alert.

   Clients that depend on having a small record size MAY continue to
   advertise the "max_fragment_length".



Thomson                 Expires November 18, 2018               [Page 6]

Internet-Draft              TLS Record Limit                    May 2018


6.  Security Considerations

   Very small record sizes might generate additional work for senders
   and receivers, limiting throughput and increasing exposure to denial
   of service.

7.  IANA Considerations

   This document registers the "record_size_limit" extension in the TLS
   "ExtensionType Values" registry established in [RFC5246].  The
   "record_size_limit" extension has been assigned a code point of TBD.
   This entry [[will be|is]] marked as recommended ([TLS-REGISTRY] and
   marked as "Encrypted" in TLS 1.3 [TLS].

   In the same registry, the "max_fragment_length" [[has been|will be]]
   changed to a status of not recommended.

8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246,
              DOI 10.17487/RFC5246, August 2008,
              <https://www.rfc-editor.org/info/rfc5246>.

   [RFC6066]  Eastlake 3rd, D., "Transport Layer Security (TLS)
              Extensions: Extension Definitions", RFC 6066,
              DOI 10.17487/RFC6066, January 2011,
              <https://www.rfc-editor.org/info/rfc6066>.

   [RFC7366]  Gutmann, P., "Encrypt-then-MAC for Transport Layer
              Security (TLS) and Datagram Transport Layer Security
              (DTLS)", RFC 7366, DOI 10.17487/RFC7366, September 2014,
              <https://www.rfc-editor.org/info/rfc7366>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [TLS]      Rescorla, E., "The Transport Layer Security (TLS) Protocol
              Version 1.3", draft-ietf-tls-tls13-28 (work in progress),
              March 2018.



Thomson                 Expires November 18, 2018               [Page 7]

Internet-Draft              TLS Record Limit                    May 2018


8.2.  Informative References

   [DTLS]     Rescorla, E. and N. Modadugu, "Datagram Transport Layer
              Security Version 1.2", RFC 6347, DOI 10.17487/RFC6347,
              January 2012, <https://www.rfc-editor.org/info/rfc6347>.

   [PMTU]     McCann, J., Deering, S., Mogul, J., and R. Hinden, Ed.,
              "Path MTU Discovery for IP version 6", STD 87, RFC 8201,
              DOI 10.17487/RFC8201, July 2017,
              <https://www.rfc-editor.org/info/rfc8201>.

   [RFC5116]  McGrew, D., "An Interface and Algorithms for Authenticated
              Encryption", RFC 5116, DOI 10.17487/RFC5116, January 2008,
              <https://www.rfc-editor.org/info/rfc5116>.

   [RFC7925]  Tschofenig, H., Ed. and T. Fossati, "Transport Layer
              Security (TLS) / Datagram Transport Layer Security (DTLS)
              Profiles for the Internet of Things", RFC 7925,
              DOI 10.17487/RFC7925, July 2016,
              <https://www.rfc-editor.org/info/rfc7925>.

   [TLS-REGISTRY]
              Salowey, J. and S. Turner, "IANA Registry Updates for TLS
              and DTLS", draft-ietf-tls-iana-registry-updates-04 (work
              in progress), February 2018.

Appendix A.  Acknowledgments

   Thomas Pornin and Hannes Tschofenig provided significant input to
   this document.  Alan DeKok identified an issue with the interaction
   between record size limits and PMTU.

Author's Address

   Martin Thomson
   Mozilla

   Email: martin.thomson@gmail.com













Thomson                 Expires November 18, 2018               [Page 8]