Internet DRAFT - draft-jones-oauth-dyn-reg-metadata
draft-jones-oauth-dyn-reg-metadata
OAuth Working Group J. Richer
Internet-Draft The MITRE Corporation
Intended status: Standards Track M. Jones
Expires: August 1, 2014 Microsoft
J. Bradley
Ping Identity
M. Machulak
Newcastle University
January 28, 2014
OAuth 2.0 Dynamic Client Registration Metadata
draft-jones-oauth-dyn-reg-metadata-00
Abstract
This specification defines client metadata values used to describe
attributes of dynamically registered OAuth 2.0 clients.
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on August 1, 2014.
Copyright Notice
Copyright (c) 2014 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
Richer, et al. Expires August 1, 2014 [Page 1]
Internet-Draft OAuth Dynamic Registration Metadata January 2014
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Notational Conventions . . . . . . . . . . . . . . . . . . 3
1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
2. Client Metadata . . . . . . . . . . . . . . . . . . . . . . . 3
2.1. Human Readable Client Metadata . . . . . . . . . . . . . . 5
3. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6
3.1. OAuth Registration Client Metadata Registration . . . . . 6
3.1.1. Registry Contents . . . . . . . . . . . . . . . . . . 6
4. Security Considerations . . . . . . . . . . . . . . . . . . . 8
5. Normative References . . . . . . . . . . . . . . . . . . . . . 8
Appendix A. Acknowledgments . . . . . . . . . . . . . . . . . . . 9
Appendix B. Open Issues . . . . . . . . . . . . . . . . . . . . . 9
Appendix C. Document History . . . . . . . . . . . . . . . . . . 10
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 10
Richer, et al. Expires August 1, 2014 [Page 2]
Internet-Draft OAuth Dynamic Registration Metadata January 2014
1. Introduction
In order for an OAuth 2.0 client to utilize an OAuth 2.0
authorization server, the client needs specific information to
interact with the server, including an OAuth 2.0 Client ID to use at
that server. The OAuth 2.0 Dynamic Client Registration Core Protocol
[OAuth.Registration] specification describes how an OAuth 2.0 client
can be dynamically registered with an authorization server to obtain
this information and how metadata about the client can be registered
with the server.
This specification extends the core registration specification by
defining a specific set of client metadata values that can be used to
describe additional attributes of dynamically registered OAuth 2.0
clients beyond those defined in the core registration specification.
1.1. Notational Conventions
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT',
'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'MAY', and 'OPTIONAL' in this
document are to be interpreted as described in [RFC2119].
Unless otherwise noted, all the protocol parameter names and values
are case sensitive.
1.2. Terminology
This specification uses the terms "Access Token", "Refresh Token",
"Authorization Code", "Authorization Grant", "Authorization Server",
"Authorization Endpoint", "Client", "Client Identifier", "Client
Secret", "Protected Resource", "Resource Owner", "Resource Server",
"Response Type", and "Token Endpoint" defined by OAuth 2.0 [RFC6749]
and the terms defined by the OAuth 2.0 Client Dynamic Registration
Core Protocol [OAuth.Registration].
2. Client Metadata
Registering client metadata values with an authorization server may
be necessary or useful to facilitate usage of the authorization
server by the client. This specification extends the list of client
metadata values defined in OAuth 2.0 Client Dynamic Registration Core
Protocol [OAuth.Registration] with the following fields:
Richer, et al. Expires August 1, 2014 [Page 3]
Internet-Draft OAuth Dynamic Registration Metadata January 2014
client_name Human-readable name of the client to be presented to the
user. If omitted, the authorization server MAY display the raw
"client_id" value to the user instead. It is RECOMMENDED that
clients always send this field. The value of this field MAY be
internationalized, as described in Section 2.1.
client_uri URL of the homepage of the client. If present, the
server SHOULD display this URL to the end user in a clickable
fashion. It is RECOMMENDED that clients always send this field.
The value of this field MUST point to a valid web page. The value
of this field MAY be internationalized, as described in
Section 2.1.
logo_uri URL that references a logo for the client. If present, the
server SHOULD display this image to the end user during approval.
The value of this field MUST point to a valid image file. The
value of this field MAY be internationalized, as described in
Section 2.1.
scope Space separated list of scope values (as described in OAuth
2.0 Section 3.3 [RFC6749]) that the client can use when requesting
access tokens. The semantics of values in this list is service
specific. If omitted, an authorization server MAY register a
Client with a default set of scopes.
contacts Array of email addresses for people responsible for this
client. The authorization server MAY make these addresses
available to end users for support requests for the client. An
authorization server MAY use these email addresses as identifiers
for an administrative page for this client.
tos_uri URL that points to a human-readable Terms of Service
document for the client. The Authorization Server SHOULD display
this URL to the end-user if it is given. The Terms of Service
usually describe a contractual relationship between the end-user
and the client that the end-user accepts when authorizing the
client. The value of this field MUST point to a valid web page.
The value of this field MAY be internationalized, as described in
Section 2.1.
policy_uri URL that points to a human-readable Policy document for
the client. The authorization server SHOULD display this URL to
the end-user if it is given. The policy usually describes how an
end-user's data will be used by the client. The value of this
field MUST point to a valid web page. The value of this field MAY
be internationalized, as described in Section 2.1.
Richer, et al. Expires August 1, 2014 [Page 4]
Internet-Draft OAuth Dynamic Registration Metadata January 2014
jwks_uri URL for the Client's JSON Web Key Set [JWK] document
representing the client's public keys. The value of this field
MUST point to a valid JWK Set. These keys MAY be used for higher
level protocols that require signing or encryption.
software_id Identifier for the software that comprises a client.
Unlike "client_id", which is issued by the authorization server
and generally varies between instances, the "software_id" is
asserted by the client software and is intended to be shared
between all copies of the client software. The value for this
field MAY be a UUID [RFC4122]. The identifier SHOULD NOT change
when software version changes or when a new installation instance
is detected. Authorization servers MUST treat this field as self-
asserted by the client and MUST NOT make any trusted decisions on
the value of this field alone.
software_version Version identifier for the software that comprises
a client. The value of this field is a string that is intended to
be compared using string equality matching. The value of the
"software_version" SHOULD change on any update to the client
software. Authorization servers MUST treat this field as self-
asserted by the client and MUST NOT make any trusted decisions on
the value of this field alone.
2.1. Human Readable Client Metadata
Human-readable client metadata values and client metadata values that
reference human-readable values MAY be represented in multiple
languages and scripts. For example, the values of fields such as
"client_name", "tos_uri", "policy_uri", "logo_uri", and "client_uri"
might have multiple locale-specific values in some client
registrations.
To specify the languages and scripts, BCP47 [RFC5646] language tags
are added to client metadata member names, delimited by a #
character. Since JSON member names are case sensitive, it is
RECOMMENDED that language tag values used in Claim Names be spelled
using the character case with which they are registered in the IANA
Language Subtag Registry [IANA.Language]. In particular, normally
language names are spelled with lowercase characters, region names
are spelled with uppercase characters, and languages are spelled with
mixed case characters. However, since BCP47 language tag values are
case insensitive, implementations SHOULD interpret the language tag
values supplied in a case insensitive manner. Per the
recommendations in BCP47, language tag values used in metadata member
names should only be as specific as necessary. For instance, using
"fr" might be sufficient in many contexts, rather than "fr-CA" or
"fr-FR".
Richer, et al. Expires August 1, 2014 [Page 5]
Internet-Draft OAuth Dynamic Registration Metadata January 2014
For example, a client could represent its name in English as
""client_name#en": "My Client"" and its name in Japanese as
""client_name#ja-Jpan-JP":
"\u30AF\u30E9\u30A4\u30A2\u30F3\u30C8\u540D"" within the same
registration request. The authorization server MAY display any or
all of these names to the resource owner during the authorization
step, choosing which name to display based on system configuration,
user preferences or other factors.
If any human-readable field is sent without a language tag, parties
using it MUST NOT make any assumptions about the language, character
set, or script of the string value, and the string value MUST be used
as-is wherever it is presented in a user interface. To facilitate
interoperability, it is RECOMMENDED that clients and servers use a
human-readable field without any language tags in addition to any
language-specific fields, and it is RECOMMENDED that any human-
readable fields sent without language tags contain values suitable
for display on a wide variety of systems.
Implementer's Note: Many JSON libraries make it possible to reference
members of a JSON object as members of an object construct in the
native programming environment of the library. However, while the
"#" character is a valid character inside of a JSON object's member
names, it is not a valid character for use in an object member name
in many programming environments. Therefore, implementations will
need to use alternative access forms for these claims. For instance,
in JavaScript, if one parses the JSON as follows, "var j =
JSON.parse(json);", then the member "client_name#en-us" can be
accessed using the JavaScript syntax "j["client_name#en-us"]".
3. IANA Considerations
3.1. OAuth Registration Client Metadata Registration
This specification registers the Client Metadata values defined in
Section 2 in the IANA OAuth Registration Client Metadata registry
defined in [OAuth.Registration].
3.1.1. Registry Contents
o Client Metadata Name: "client_name"
o Client Metadata Description: Human-readable name of the client to
be presented to the user
o Change Controller: IESG
o Specification Document(s): [[ this document ]]
Richer, et al. Expires August 1, 2014 [Page 6]
Internet-Draft OAuth Dynamic Registration Metadata January 2014
o Client Metadata Name: "client_uri"
o Client Metadata Description: URL of the homepage of the client
o Change Controller: IESG
o Specification Document(s): [[ this document ]]
o Client Metadata Name: "logo_uri"
o Client Metadata Description: URL that references a logo for the
client
o Change Controller: IESG
o Specification Document(s): [[ this document ]]
o Client Metadata Name: "scope"
o Client Metadata Description: Space separated list of scope values
o Change Controller: IESG
o Specification Document(s): [[ this document ]]
o Client Metadata Name: "contacts"
o Client Metadata Description: Array of email addresses for people
responsible for this client
o Change Controller: IESG
o Specification document(s): [[ this document ]]
o Client Metadata Name: "tos_uri"
o Client Metadata Description: URL that points to a human-readable
Terms of Service document for the client
o Change Controller: IESG
o Specification Document(s): [[ this document ]]
o Client Metadata Name: "policy_uri"
o Client Metadata Description: URL that points to a human-readable
Policy document for the client
o Change Controller: IESG
o Specification Document(s): [[ this document ]]
o Client Metadata Name: "jwks_uri"
o Client Metadata Description: URL for the Client's JSON Web Key Set
[JWK] document representing the client's public keys
o Change Controller: IESG
o Specification Document(s): [[ this document ]]
o Client Metadata Name: "software_id"
o Client Metadata Description: Identifier for the software that
comprises a client
o Change Controller: IESG
o Specification Document(s): [[ this document ]]
Richer, et al. Expires August 1, 2014 [Page 7]
Internet-Draft OAuth Dynamic Registration Metadata January 2014
o Client Metadata Name: "software_version"
o Client Metadata Description: Version identifier for the software
that comprises a client
o Change Controller: IESG
o Specification Document(s): [[ this document ]]
4. Security Considerations
The authorization server MUST treat all client metadata as self-
asserted. For instance, a rogue client might use the name and logo
for the legitimate client which it is trying to impersonate.
Additionally, a rogue client might try to use the software identifier
or software version of a legitimate client to attempt to associate
itself on the authorization server instances of the legitimate
client. To counteract this, an authorization server needs to take
steps to mitigate this phishing risk by looking at the entire
registration request and client configuration. For instance, an
authorization server could warn if the domain/site of the logo
doesn't match the domain/site of redirect URIs. An authorization
server could also refuse registration from a known software
identifier that is requesting different redirect URIs or a different
client homepage uri. An authorization server can also present
warning messages to end users about dynamically registered clients in
all cases, especially if such clients have been recently registered
or have not been trusted by any users at the authorization server
before.
In a situation where the authorization server is supporting open
client registration, it must be extremely careful with any URL
provided by the client that will be displayed to the user (e.g.
"logo_uri", "tos_uri", "client_uri", and "policy_uri"). For
instance, a rogue client could specify a registration request with a
reference to a drive-by download in the "policy_uri". The
authorization server SHOULD check to see if the "logo_uri",
"tos_uri", "client_uri", and "policy_uri" have the same host and
scheme as the those defined in the array of "redirect_uris" and that
all of these resolve to valid web pages.
5. Normative References
[IANA.Language]
Internet Assigned Numbers Authority (IANA), "Language
Subtag Registry", 2005.
[JWK] Jones, M., "JSON Web Key (JWK)",
draft-ietf-jose-json-web-key (work in progress),
Richer, et al. Expires August 1, 2014 [Page 8]
Internet-Draft OAuth Dynamic Registration Metadata January 2014
January 2014.
[OAuth.Registration]
Richer, J., Jones, M., Bradley, J., and M. Machulak,
"OAuth 2.0 Dynamic Client Registration Core Protocol",
draft-ietf-oauth-dyn-reg (work in progress), January 2014.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally
Unique IDentifier (UUID) URN Namespace", RFC 4122,
July 2005.
[RFC5646] Phillips, A. and M. Davis, "Tags for Identifying
Languages", BCP 47, RFC 5646, September 2009.
[RFC6749] Hardt, D., "The OAuth 2.0 Authorization Framework",
RFC 6749, October 2012.
Appendix A. Acknowledgments
The authors thank the OAuth Working Group, the User-Managed Access
Working Group, and the OpenID Connect Working Group participants for
their input to this document. In particular, the following
individuals have been instrumental in their review and contribution
to various versions of this document: Amanda Anganes, Derek Atkins,
Tim Bray, Domenico Catalano, Donald Coffin, Vladimir Dzhuvinov,
George Fletcher, Thomas Hardjono, Phil Hunt, William Kim, Torsten
Lodderstedt, Eve Maler, Josh Mandel, Nov Matake, Tony Nadalin, Nat
Sakimura, Christian Scholz, and Hannes Tschofenig.
Appendix B. Open Issues
o Should this specification become a working group document so that
the functionality defined in this document that was previously
defined in draft-ietf-oauth-dyn-reg-14 is retained in working
group drafts?
o Should this specification become a working group document so that
the functionality that was previously defined in
draft-ietf-oauth-dyn-reg-14 is retained in working group drafts?
Richer, et al. Expires August 1, 2014 [Page 9]
Internet-Draft OAuth Dynamic Registration Metadata January 2014
Appendix C. Document History
[[ to be removed by the RFC editor before publication as an RFC ]]
-00
o Partitioned the Dynamic Client Registration specification into
core, metadata, and management specifications. This built on work
first published as draft-richer-oauth-dyn-reg-core-00 and
draft-richer-oauth-dyn-reg-management-00.
o Registered the Client Metadata values defined by this
specification in the IANA OAuth Registration Client Metadata
registry.
o Rewrote the introduction.
Authors' Addresses
Justin Richer
The MITRE Corporation
Email: jricher@mitre.org
Michael B. Jones
Microsoft
Email: mbj@microsoft.com
URI: http://self-issued.info/
John Bradley
Ping Identity
Email: ve7jtb@ve7jtb.com
Maciej Machulak
Newcastle University
Email: m.p.machulak@ncl.ac.uk
URI: http://ncl.ac.uk/
Richer, et al. Expires August 1, 2014 [Page 10]
