Internet DRAFT - draft-looker-oauth-attestation-based-client-auth
draft-looker-oauth-attestation-based-client-auth
Network Working Group T. Looker
Internet-Draft MATTR
Intended status: Informational P. Bastian
Expires: 11 January 2024 Bundesdruckerei GmbH
10 July 2023
OAuth 2.0 Attestation-Based Client Authentication
draft-looker-oauth-attestation-based-client-auth-00
Abstract
This specification defines a new method of client authentication for
OAuth 2.0 [RFC6749] by extending the approach defined in [RFC7521].
This new method enables client deployments that are traditionally
viewed as public clients to be able to authenticate with the
authorization server through an attestation based authentication
scheme.
About This Document
This note is to be removed before publishing as an RFC.
The latest revision of this draft can be found at
https://vcstuff.github.io/draft-looker-oauth-attestation-based-
client-auth/draft-looker-oauth-attestation-based-client-auth.html.
Status information for this document may be found at
https://datatracker.ietf.org/doc/draft-looker-oauth-attestation-
based-client-auth/.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 11 January 2024.
Looker & Bastian Expires 11 January 2024 [Page 1]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
Copyright Notice
Copyright (c) 2023 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions and Definitions . . . . . . . . . . . . . . . . . 4
3. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 4
4. Client Authentication in the Token Request . . . . . . . . . 5
4.1. JWT Format and Processing Requirements . . . . . . . . . 6
4.1.1. Client Attestation JWT . . . . . . . . . . . . . . . 6
4.1.2. Client Attestation PoP JWT . . . . . . . . . . . . . 7
5. Implementation Considerations . . . . . . . . . . . . . . . . 9
5.1. Reuse of a Client Attestation JWT . . . . . . . . . . . . 9
5.2. Refresh token binding . . . . . . . . . . . . . . . . . . 9
6. Privacy Considerations . . . . . . . . . . . . . . . . . . . 9
6.1. Client Instance Tracking Across Authorization Servers . . 9
7. Security Considerations . . . . . . . . . . . . . . . . . . . 10
8. Appendix A IANA Considerations . . . . . . . . . . . . . . . 10
8.1. Sub-Namespace Registration of urn:ietf:params:oauth:client-
assertion-type:jwt-client-attestation . . . . . . . . . . 10
8.2. Registration of attest_jwt_client_auth Token Endpoint
Authentication Method . . . . . . . . . . . . . . . . . . 10
9. References . . . . . . . . . . . . . . . . . . . . . . . . . 10
9.1. Normative References . . . . . . . . . . . . . . . . . . 10
9.2. Informative References . . . . . . . . . . . . . . . . . 11
Appendix A. Additional Examples . . . . . . . . . . . . . . . . 12
A.1. Wallet Instance Attestation . . . . . . . . . . . . . . . 12
Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . 13
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 13
1. Introduction
[RFC7521] defines a way for a client to include an assertion in a
token request to an authorization server for the purposes of client
authentication. This specification uses this framework to define a
new assertion type that provides a way for a client instance to
authenticate itself with the authorization server through an
assertion that is bound to a public key (for proof of possession).
This assertion is designated with the name of Client Attestation in
Looker & Bastian Expires 11 January 2024 [Page 2]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
this draft.
The following diagram depicts the overall architecture and protocol
flow.
(3) Generate Client
Attestation
+-------+
| |
| \ /
+---------------+
| |
| |
| Client |
| Backend |
| |
| |
+---------------+
/ \ |
| |
(2) Request | | (4) Respond with
Client | | generated Client
Attestation | | Attestation
for generated | |
key | |
| |
| \ /
+---------------+ +---------------+
| | | |
+------->| |<------------------------>| |
(1) Generate | | Client | (6) Interaction | Authorization |
Attestation Key | | Instance | using Client | Server |
+--------| | Attestation + PoP | |
| | for authentication | |
+---------------+ +---------------+
/ \ |
| |
+-------+
(5) Generate
Client Attestation PoP
The flow starts with the Authorization Server communicating its
requirements for the client authentication to the client, made
available in its metadata. A Client instance that wants to request
an access token from this Authorization Server needs to obtain a
Client Attestation JWT, for example, from its client backend first.
Looker & Bastian Expires 11 January 2024 [Page 3]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
Therefore, the client generates a key (Client Instance Key) and
(platform specific) attestations to prove its authenticity, integrity
and security to the client backend (step 1). The Client instance
sends this data to the client backend in request for a Client
Attestation JWT (step 2). If the Client Backend successfully
validates the Client Instance Key and further data, it generates a
signed Client Attestation JWT (step 3). As the Client Attestation
JWT is cryptographically bound to the Client Instance Key generated
by the client, the attestation is bound to this particular client
instance. The client backend responds to the client's request by
sending the Client Attestation JWT (step 4).
The client can proceed now and generate a Client Attestation Proof of
Possession (PoP) for the Client Instance Key (step 5). Lastly, the
client sends both the Client Attestation JWT and the Client
Attestation PoP with the Token Request to the Authorization Server.
The Authorization Server validates the client attestation and thus
authenticates the client. The Authorization Server may continue to
issue sender-constrained access tokens using [DPOP].
Note that the protocol for steps 2 and 4 and how the client instance
authenticates with the client backend is out of scope of this
specification. Note also that this specification can be utilized
without the client having a backend server at all; in this case, each
client instance will perform the functions described as being done by
the backend for itself.
This specification defines the format of the Client Attestation that
a client instance uses to authenticate in its interactions with an
authorization server, which is comprised of two key parts:
1. A Client Attestation JWT - typically produced by the client
backend.
2. A Client Attestation Proof of Possession (PoP) - produced by the
client instance.
2. Conventions and Definitions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in
BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
3. Terminology
Client Attestation JWT: A JSON Web Token (JWT) generated by the
Looker & Bastian Expires 11 January 2024 [Page 4]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
client backend which is bound to a key managed by a client
instance which can then be used by the instance for client
authentication.
Client Attestation Proof of Possession (PoP) JWT: A Proof of
Possession generated by the client instance using the key that the
Client Attestation JWT is bound to.
Client Instance Key: A cryptographic, asymmetric key generated by
the client instance and proven to the client backend. The public
key is contained in the Client Attestation JWT and is used to sign
the Client Attestation Proof of Possession.
4. Client Authentication in the Token Request
To perform client authentication using this scheme, the client
instance uses the following parameter values and encodings.
The value of the "client_assertion_type" is
"urn:ietf:params:oauth:client-assertion-type:jwt-client-attestation".
The value of the "client_assertion" parameter contains two JWTs,
separated by a '~' character. It MUST NOT contain more or less than
precisely two JWTs seperated by the '~' character. The first JWT
MUST be the client attestation JWT defined in Section 4.1.1, the
second JWT MUST the client attestation PoP defined in Section 4.1.2.
The following example demonstrates client authentication using this
scheme during the presentation of an authorization code grant in an
access token request (with extra line breaks for display purposes
only):
POST /token HTTP/1.1
Host: as.example.com
Content-Type: application/x-www-form-urlencoded
grant_type=authorization_code&
code=n0esc3NRze7LTCu7iYzS6a5acc3f0ogp4&
client_assertion_type=urn%3Aietf%3Aparams%3Aoauth%3A
client-assertion-type%3Ajwt-client-attestation&
client_assertion=eyJhbGciOiJSUzI1NiIsImtpZCI6IjIyIn0.
eyJpc3Mi[...omitted for brevity...].
cC4hiUPo[...omitted for brevity...]~eyJzI1NiIsImtphbGciOimtpZCI6IjIyIn0.
IjIyIn0[...omitted for brevity...].
iOiJSUzI1[...omitted for brevity...]
Looker & Bastian Expires 11 January 2024 [Page 5]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
4.1. JWT Format and Processing Requirements
In order to authenticate the client using this scheme, the
authorization server MUST validate BOTH the JWTs present in the
"client_assertion" parameter according to the criteria below.
It is RECOMMENDED that the authorization server validate the Client
Attestation JWT prior to validating the Client Attestation PoP.
4.1.1. Client Attestation JWT
The following rules apply to validating the client attestation JWT.
Application of additional restrictions and policy are at the
discretion of the authorization server.
1. The JWT MUST contain an "iss" (issuer) claim that contains a
unique identifier for the entity that issued the JWT. In the
absence of an application profile specifying otherwise,
compliant applications MUST compare issuer values using the
Simple String Comparison method defined in Section 6.2.1 of
[RFC3986].
2. The JWT MUST contain a "sub" (subject) claim with a value
corresponding to the "client_id" of the OAuth client.
3. The JWT MUST contain an "exp" (expiration time) claim that
limits the time window during which the JWT can be used. The
authorization server MUST reject any JWT with an expiration time
that has passed, subject to allowable clock skew between
systems.
4. The JWT MUST contain an "cnf" claim conforming [RFC7800] that
conveys the key to be used for sender constraining tokens issued
by the authorization server. The key MUST be expressed using
the "jwk" representation.
5. The JWT MAY contain an "nbf" (not before) claim that identifies
the time before which the token MUST NOT be accepted for
processing.
6. The JWT MAY contain an "iat" (issued at) claim that identifies
the time at which the JWT was issued.
7. The JWT MAY contain a "jti" (JWT ID) claim that provides a
unique identifier for the token. The authorization server MAY
ensure that JWTs are not replayed by maintaining the set of used
"jti" values for the length of time for which the JWT would be
considered valid based on the applicable "exp" instant.
Looker & Bastian Expires 11 January 2024 [Page 6]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
8. The JWT MAY contain other claims.
9. The JWT MUST be digitally signed using an asymmetric
cryptographic algorithm. The authorization server MUST reject
the JWT if it is using a Message Authentication Code (MAC) based
algorithm. The authorization server MUST reject JWTs with an
invalid signature.
10. The authorization server MUST reject a JWT that is not valid in
all other respects per "JSON Web Token (JWT)" [RFC7519].
The following example is the decoded header and payload of a JWT
meeting the processing rules as defined above.
{
"alg": "ES256",
"kid": "11"
}
.
{
"iss": "https://client.example.com",
"sub": "https://client.example.com",
"nbf":1300815780,
"exp":1300819380,
"cnf": {
"jwk": {
"kty": "EC",
"use": "sig",
"crv": "P-256",
"x": "18wHLeIgW9wVN6VD1Txgpqy2LszYkMf6J8njVAibvhM",
"y": "-V4dS4UaLMgP_4fY4j8ir7cl1TXlFdAgcx55o7TkcSA"
}
}
}
4.1.2. Client Attestation PoP JWT
The following rules apply to validating the Client Attestation JWT.
Application of additional restrictions and policy are at the
discretion of the Authorization Server.
1. The JWT MUST contain an "iss" (issuer) claim with a value
corresponding to the "client_id" of the OAuth client.
2. The JWT MUST contain an "exp" (expiration time) claim that
limits the time window during which the JWT can be used. The
authorization server MUST reject any JWT with an expiration time
that has passed, subject to allowable clock skew between
Looker & Bastian Expires 11 January 2024 [Page 7]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
systems. Note that the authorization server may reject JWTs
with an "exp" claim value that is unreasonably far in the
future.
3. The JWT MUST contain a "jti" (JWT ID) claim that provides a
unique identifier for the token. The authorization server MAY
ensure that JWTs are not replayed by maintaining the set of used
"jti" values for the length of time for which the JWT would be
considered valid based on the applicable "exp" instant.
4. The JWT MUST contain an "aud" (audience) claim containing a
value that identifies the authorization server as an intended
audience. The [RFC8414] issuer identifier URL of the
authorization server MUST be used as a value for an "aud"
element to identify the authorization server as the intended
audience of the JWT.
5. The JWT MAY contain an "nbf" (not before) claim that identifies
the time before which the token MUST NOT be accepted for
processing.
6. The JWT MAY contain an "iat" (issued at) claim that identifies
the time at which the JWT was issued. Note that the
authorization server may reject JWTs with an "iat" claim value
that is unreasonably far in the past.
7. The JWT MAY contain other claims.
8. The JWT MUST be digitally signed using an asymmetric
cryptographic algorithm. The authorization server MUST reject
the JWT if it is using a Message Authentication Code (MAC) based
algorithm. The authorization server MUST reject JWTs with an
invalid signature.
9. The public key used to verify the JWT MUST be the key located in
the "cnf" claim of the corresponding client attestation JWT.
10. The authorization server MUST reject a JWT that is not valid in
all other respects per "JSON Web Token (JWT)" [RFC7519].
The following example is the decoded header and payload of a JWT
meeting the processing rules as defined above.
Looker & Bastian Expires 11 January 2024 [Page 8]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
{
"alg": "ES256"
}
.
{
"iss": "https://client.example.com",
"aud": "https://as.example.com",
"nbf":1300815780,
"exp":1300819380,
}
5. Implementation Considerations
5.1. Reuse of a Client Attestation JWT
Implementers should be aware that the design of this authentication
mechanism deliberately allows for a client instance to re-use a
single Client Attestation JWT in multiple interactions/requests with
an authorization server, whilst producing a fresh Client Attestation
PoP JWT. Client deployments should consider this when determining
the validity period for issued Client Attestation JWTs as this
ultimately controls how long a client instance can re-use a single
Client Attestation JWT.
5.2. Refresh token binding
Authorization servers issuing a refresh token in response to a token
request using the "urn:ietf:params:oauth:client-assertion-type:jwt-
client-attestation" client authentication method MUST bind the
refresh token to the client instance, and NOT just the client as
specified in section 6 [RFC6749]. To prove this binding, the client
instance MUST authenticate itself to the authorization server when
refreshing an access token using the "urn:ietf:params:oauth:client-
assertion-type:jwt-client-attestation" authentication method. The
client MUST also use the same Client Attestation that was used for
authentication when the refresh token was issued.
6. Privacy Considerations
6.1. Client Instance Tracking Across Authorization Servers
Implementers should be aware that using the same client attestation
across multiple authorization servers could result in correlation of
the end user using the client instance through claim values
(including the public key in the cnf claim). Client deployments are
therefore RECOMMENDED to use different client attestations across
different authorization servers.
Looker & Bastian Expires 11 January 2024 [Page 9]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
7. Security Considerations
The guidance provided by [RFC7519] and [RFC8725] applies.
8. Appendix A IANA Considerations
8.1. Sub-Namespace Registration of urn:ietf:params:oauth:client-
assertion-type:jwt-client-attestation
This section registers the value "client-assertion-type:jwt-client-
attestation" in the IANA "OAuth URI" registry established by "An IETF
URN Sub-Namespace for OAuth" [RFC6755].
* URN: urn:ietf:params:oauth:client-assertion-type:jwt-client-
attestation
* Common Name: OAuth 2.0 Attested Key-Based Client Authentication
* Change Controller: IESG
* Specification Document: TBC
8.2. Registration of attest_jwt_client_auth Token Endpoint
Authentication Method
This section registers the value "attest_jwt_client_auth" in the IANA
"OAuth Token Endpoint Authentication Methods" registry established by
OAuth 2.0 Dynamic Client Registration Protocol [RFC7591].
* Token Endpoint Authentication Method Name:
"attest_jwt_client_auth"
* Change Controller: IESG
* Specification Document(s): TBC
9. References
9.1. Normative References
[DPOP] Fett, D., Campbell, B., Bradley, J., Lodderstedt, T.,
Jones, M., and D. Waite, "OAuth 2.0 Demonstrating Proof-
of-Possession at the Application Layer (DPoP)", n.d..
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/rfc/rfc2119>.
Looker & Bastian Expires 11 January 2024 [Page 10]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, DOI 10.17487/RFC3986, January 2005,
<https://www.rfc-editor.org/rfc/rfc3986>.
[RFC6755] Campbell, B. and H. Tschofenig, "An IETF URN Sub-Namespace
for OAuth", RFC 6755, DOI 10.17487/RFC6755, October 2012,
<https://www.rfc-editor.org/rfc/rfc6755>.
[RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
(JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
<https://www.rfc-editor.org/rfc/rfc7519>.
[RFC7591] Richer, J., Ed., Jones, M., Bradley, J., Machulak, M., and
P. Hunt, "OAuth 2.0 Dynamic Client Registration Protocol",
RFC 7591, DOI 10.17487/RFC7591, July 2015,
<https://www.rfc-editor.org/rfc/rfc7591>.
[RFC7638] Jones, M. and N. Sakimura, "JSON Web Key (JWK)
Thumbprint", RFC 7638, DOI 10.17487/RFC7638, September
2015, <https://www.rfc-editor.org/rfc/rfc7638>.
[RFC7800] Jones, M., Bradley, J., and H. Tschofenig, "Proof-of-
Possession Key Semantics for JSON Web Tokens (JWTs)",
RFC 7800, DOI 10.17487/RFC7800, April 2016,
<https://www.rfc-editor.org/rfc/rfc7800>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/rfc/rfc8174>.
[RFC8414] Jones, M., Sakimura, N., and J. Bradley, "OAuth 2.0
Authorization Server Metadata", RFC 8414,
DOI 10.17487/RFC8414, June 2018,
<https://www.rfc-editor.org/rfc/rfc8414>.
[RFC8725] Sheffer, Y., Hardt, D., and M. Jones, "JSON Web Token Best
Current Practices", BCP 225, RFC 8725,
DOI 10.17487/RFC8725, February 2020,
<https://www.rfc-editor.org/rfc/rfc8725>.
9.2. Informative References
[ARF] "The European Digital Identity Wallet Architecture and
Reference Framework", n.d..
Looker & Bastian Expires 11 January 2024 [Page 11]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
[RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
RFC 6749, DOI 10.17487/RFC6749, October 2012,
<https://www.rfc-editor.org/rfc/rfc6749>.
[RFC7521] Campbell, B., Mortimore, C., Jones, M., and Y. Goland,
"Assertion Framework for OAuth 2.0 Client Authentication
and Authorization Grants", RFC 7521, DOI 10.17487/RFC7521,
May 2015, <https://www.rfc-editor.org/rfc/rfc7521>.
Appendix A. Additional Examples
A.1. Wallet Instance Attestation
This non-normative example shows a client attestations used as an
wallet instance attestation in the context of eIDAS 2.0 [ARF], e.g.
to secure a Type-1 configuration credential. The additional claims
describe the wallet's device binding und user binding capabilities
and the achievable level of assurance.
{
"typ": "wallet-attestation+jwt",
"alg": "ES256",
"kid": "1"
}
.
{
"iss": "https://wallet-provider.com",
"sub": "https://wallet-provider.com/solution/wallet-1.6.0",
"iat": 1541493724,
"exp": 1516247022,
"wallet_name": "human readable wallet name",
"key_type" : "STRONGBOX",
"user_authentication" : "SYSTEM_PIN",
"attested_security_context" : "https://eu-trust-list.eu/asc/high",
"cnf": {
"jwk" : {
"kty": "EC",
"crv": "P-256",
"x": "TCAER19Zvu3OHF4j4W4vfSVoHIP1ILilDls7vCeGemc",
"y": "ZxjiWWbZMQGHVWKVQ4hbSIirsVfuecCE6t4jT9F2HZQ"
}
}
}
Looker & Bastian Expires 11 January 2024 [Page 12]
Internet-Draft OAuth 2.0 Attestation-Based Client Authe July 2023
Acknowledgments
We would like to thank Michael B. Jones, Torsten Lodderstedt, and
Kristina Yasuda for their valuable contributions to this
specification.
Authors' Addresses
Tobias Looker
MATTR
Email: tobias.looker@mattr.global
Paul Bastian
Bundesdruckerei GmbH
Email: paul.bastian@bdr.de
Looker & Bastian Expires 11 January 2024 [Page 13]
