Internet DRAFT - draft-melnikov-rfc4551-bis
draft-melnikov-rfc4551-bis
Network Working Group A. Melnikov
Internet-Draft Isode Ltd.
Obsoletes: 4551 (if approved) May 14, 2013
Updates: 3501 (if approved)
Intended status: Standards Track
Expires: November 15, 2013
IMAP Extension for Conditional STORE Operation or Quick Flag Changes
Resynchronization
draft-melnikov-rfc4551-bis-00
Abstract
Often, multiple IMAP (RFC 3501) clients need to coordinate changes to
a common IMAP mailbox. Examples include different clients working on
behalf of the same user, and multiple users accessing shared
mailboxes. These clients need a mechanism to synchronize state
changes for messages within the mailbox. They must be able to
guarantee that only one client can change message state (e.g.,
message flags) at any time. An example of such an application is use
of an IMAP mailbox as a message queue with multiple dequeueing
clients.
The Conditional Store facility provides a protected update mechanism
for message state information that can detect and resolve conflicts
between multiple writing mail clients.
The Conditional Store facility also allows a client to quickly
resynchronize mailbox flag changes.
This document defines an extension to IMAP (RFC 3501).
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
Melnikov Expires November 15, 2013 [Page 1]
Internet-Draft IMAP CONDSTORE May 2013
This Internet-Draft will expire on November 15, 2013.
Copyright Notice
Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction and Overview . . . . . . . . . . . . . . . . . . 2
2. Conventions Used in This Document . . . . . . . . . . . . . . 5
3. IMAP Protocol Changes . . . . . . . . . . . . . . . . . . . . 5
3.1. New OK Untagged Responses for SELECT and EXAMINE . . . . 5
3.1.1. HIGHESTMODSEQ Response Code . . . . . . . . . . . . . 6
3.1.2. NOMODSEQ Response Code . . . . . . . . . . . . . . . 7
3.2. STORE and UID STORE Commands . . . . . . . . . . . . . . 7
3.3. FETCH and UID FETCH Commands . . . . . . . . . . . . . . 13
3.3.1. CHANGEDSINCE FETCH Modifier . . . . . . . . . . . . . 13
3.3.2. MODSEQ Message Data Item in FETCH Command . . . . . . 13
3.3.3. MODSEQ Search Criterion in SEARCH . . . . . . . . . . 16
3.3.4. Modified SEARCH Untagged Response . . . . . . . . . . 17
3.3.5. HIGHESTMODSEQ Status Data Items . . . . . . . . . . . 17
3.3.6. CONDSTORE Parameter to SELECT and EXAMINE . . . . . . 17
3.3.7. Additional Quality-of-Implementation Issues . . . . . 18
4. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . . 18
5. Server Implementation Considerations . . . . . . . . . . . . 21
6. Security Considerations . . . . . . . . . . . . . . . . . . . 22
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 22
8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 22
9. References . . . . . . . . . . . . . . . . . . . . . . . . . 23
9.1. Normative References . . . . . . . . . . . . . . . . . . 23
9.2. Informative References . . . . . . . . . . . . . . . . . 23
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 23
1. Introduction and Overview
Melnikov Expires November 15, 2013 [Page 2]
Internet-Draft IMAP CONDSTORE May 2013
The Conditional STORE extension is present in any IMAP4
implementation that returns "CONDSTORE" as one of the supported
capabilities in the CAPABILITY command response.
An IMAP server that supports this extension MUST associate a positive
unsigned 64-bit value called a modification sequence (mod-sequence)
with every IMAP message. This is an opaque value updated by the
server whenever a metadata item is modified. The server MUST
guarantee that each STORE command performed on the same mailbox
(including simultaneous stores to different metadata items from
different connections) will get a different mod-sequence value.
Also, for any two successful STORE operations performed in the same
session on the same mailbox, the mod-sequence of the second completed
operation MUST be greater than the mod-sequence of the first
completed. Note that the latter rule disallows the use of the system
clock as a mod-sequence, because if system time changes (e.g., an NTP
[RFC1305] client adjusting the time), the next generated value might
be less than the previous one.
Mod-sequences allow a client that supports the CONDSTORE extension to
determine if a message metadata has changed since some known moment.
Whenever the state of a flag changes (i.e., the flag is added where
previously it wasn't set, or the flag is removed and before it was
set) the value of the modification sequence for the message MUST be
updated. Adding the flag when it is already present or removing when
it is not present SHOULD NOT change the mod-sequence.
When a message is appended to a mailbox (via the IMAP APPEND command,
COPY to the mailbox, or using an external mechanism) the server
generates a new modification sequence that is higher than the highest
modification sequence of all messages in the mailbox and assigns it
to the appended message.
The server MAY store separate (per-message) modification sequence
values for different metadata items. If the server does so, per-
message mod-sequence is the highest mod-sequence of all metadata
items for the specified message.
The server that supports this extension is not required to be able to
store mod-sequences for every available mailbox. Section 3.1.2
describes how the server may act if a particular mailbox doesn't
support the persistent storage of mod-sequences.
This extension makes the following changes to the IMAP4 protocol:
a. adds UNCHANGEDSINCE STORE modifier.
Melnikov Expires November 15, 2013 [Page 3]
Internet-Draft IMAP CONDSTORE May 2013
b. adds the MODIFIED response code which should be used with an OK
response to the STORE command. (It can also be used in a NO
response.)
c. adds a new MODSEQ message data item for use with the FETCH
command.
d. adds CHANGEDSINCE FETCH modifier.
e. adds a new MODSEQ search criterion.
f. extends the syntax of untagged SEARCH responses to include mod-
sequence.
g. adds new OK untagged responses for the SELECT and EXAMINE
commands.
h. defines an additional parameter to SELECT/EXAMINE commands.
i. adds the HIGHESTMODSEQ status data item to the STATUS command.
A client supporting CONDSTORE extension indicates its willingness to
receive mod-sequence updates in all untagged FETCH responses by
issuing:
o a SELECT or EXAMINE command with the CONDSTORE parameter,
o a STATUS (HIGHESTMODSEQ) command,
o a FETCH or SEARCH command that includes the MODSEQ message data
item,
o a FETCH command with the CHANGEDSINCE modifier, or
o a STORE command with the UNCHANGEDSINCE modifier.
The server MUST include mod-sequence data in all subsequent untagged
FETCH responses (until the connection is closed), whether they were
caused by a regular STORE, a STORE with UNCHANGEDSINCE modifier, or
an external agent.
This document uses the term "CONDSTORE-aware client" to refer to a
client that announces its willingness to receive mod-sequence updates
as described above. The term "CONDSTORE enabling command" will refer
any of the commands listed above. A future extension to this
document may extend the list of CONDSTORE enabling commands. A first
CONDSTORE enabling command executed in the session MUST cause the
server to return HIGHESTMODSEQ (Section 3.1.1) unless the server has
Melnikov Expires November 15, 2013 [Page 4]
Internet-Draft IMAP CONDSTORE May 2013
sent NOMODSEQ (Section 3.1.2) response code when the currently
selected mailbox was selected.
The rest of this document describes the protocol changes more
rigorously.
2. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
In examples, lines beginning with "S:" are sent by the IMAP server,
and lines beginning with "C:" are sent by the client. Line breaks
may appear in example commands solely for editorial clarity; when
present in the actual message, they are represented by "CRLF".
Formal syntax is defined using ABNF [RFC5234].
The term "metadata" or "metadata item" is used throughout this
document. It refers to any system or user-defined keyword. Future
documents may extend "metadata" to include other dynamic message
data.
Some IMAP mailboxes are private, accessible only to the owning user.
Other mailboxes are not, either because the owner has set an Access
Control List [RFC4314] that permits access by other users, or because
it is a shared mailbox. Let's call a metadata item "shared" for the
mailbox if any changes to the metadata items are persistent and
visible to all other users accessing the mailbox. Otherwise, the
metadata item is called "private". Note that private metadata items
are still visible to all sessions accessing the mailbox as the same
user. Also note that different mailboxes may have different metadata
items as shared.
See Section 1 for the definition of a "CONDSTORE-aware client" and a
"CONDSTORE enabling command".
3. IMAP Protocol Changes
3.1. New OK Untagged Responses for SELECT and EXAMINE
This document adds two new response codes, HIGHESTMODSEQ and
NOMODSEQ. One of those response codes MUST be returned in the OK
untagged response for a successful SELECT/EXAMINE command.
When opening a mailbox, the server must check if the mailbox supports
the persistent storage of mod-sequences. If the mailbox supports the
Melnikov Expires November 15, 2013 [Page 5]
Internet-Draft IMAP CONDSTORE May 2013
persistent storage of mod-sequences and the mailbox open operation
succeeds, the server MUST send the OK untagged response including
HIGHESTMODSEQ response code. If the persistent storage for the
mailbox is not supported, the server MUST send the OK untagged
response including NOMODSEQ response code instead.
3.1.1. HIGHESTMODSEQ Response Code
This document adds a new response code that is returned in the OK
untagged response for the SELECT and EXAMINE commands. A server
supporting the persistent storage of mod-sequences for the mailbox
MUST send the OK untagged response including HIGHESTMODSEQ response
code with every successful SELECT or EXAMINE command:
OK [HIGHESTMODSEQ <mod-sequence-value>]
where <mod-sequence-value> is the highest mod-sequence value of
all messages in the mailbox. When the server changes UIDVALIDITY
for a mailbox, it doesn't have to keep the same HIGHESTMODSEQ for
the mailbox.
A disconnected client can use the value of HIGHESTMODSEQ to check if
it has to refetch metadata from the server. If the UIDVALIDITY value
has changed for the selected mailbox, the client MUST delete the
cached value of HIGHESTMODSEQ. If UIDVALIDITY for the mailbox is the
same, and if the HIGHESTMODSEQ value stored in the client's cache is
less than the value returned by the server, then some metadata items
on the server have changed since the last synchronization, and the
client needs to update its cache. The client MAY use SEARCH MODSEQ
(Section 3.4) to find out exactly which metadata items have changed.
Alternatively, the client MAY issue FETCH with the CHANGEDSINCE
modifier (Section 3.3.1) in order to fetch data for all messages that
have metadata items changed since some known modification sequence.
C: A142 SELECT INBOX
S: * 172 EXISTS
S: * 1 RECENT
S: * OK [UNSEEN 12] Message 12 is first unseen
S: * OK [UIDVALIDITY 3857529045] UIDs valid
S: * OK [UIDNEXT 4392] Predicted next UID
S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft)
S: * OK [PERMANENTFLAGS (\Deleted \Seen \*)] Limited
S: * OK [HIGHESTMODSEQ 715194045007]
S: A142 OK [READ-WRITE] SELECT completed
Example 1
Melnikov Expires November 15, 2013 [Page 6]
Internet-Draft IMAP CONDSTORE May 2013
3.1.2. NOMODSEQ Response Code
A server that doesn't support the persistent storage of mod-sequences
for the mailbox MUST send the OK untagged response including NOMODSEQ
response code with every successful SELECT or EXAMINE command. A
server that returned NOMODSEQ response code for a mailbox, which
subsequently receives one of the following commands while the mailbox
is selected:
o a FETCH command with the CHANGEDSINCE modifier,
o a FETCH or SEARCH command that includes the MODSEQ message data
item, or
o a STORE command with the UNCHANGEDSINCE modifier
MUST reject any such command with the tagged BAD response.
C: A142 SELECT INBOX
S: * 172 EXISTS
S: * 1 RECENT
S: * OK [UNSEEN 12] Message 12 is first unseen
S: * OK [UIDVALIDITY 3857529045] UIDs valid
S: * OK [UIDNEXT 4392] Predicted next UID
S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft)
S: * OK [PERMANENTFLAGS (\Deleted \Seen \*)] Limited
S: * OK [NOMODSEQ] Sorry, this mailbox format doesn't support
modsequences
S: A142 OK [READ-WRITE] SELECT completed
Example 2
3.2. STORE and UID STORE Commands
This document defines the following STORE modifier (see Section 2.5
of [RFC4466]):
UNCHANGEDSINCE <mod-sequence> For each message specified in the
message set, the server performs the following. If the mod-
sequence of any metadata item of the message is equal or less than
the specified UNCHANGEDSINCE value, then the requested operation
(as described by the message data item) is performed. If the
operation is successful, the server MUST update the mod-sequence
attribute of the message. An untagged FETCH response MUST be
sent, even if the .SILENT suffix is specified, and the response
MUST include the MODSEQ message data item. This is required to
update the client's cache with the correct mod-sequence values.
See Section 3.3.2 for more details.
Melnikov Expires November 15, 2013 [Page 7]
Internet-Draft IMAP CONDSTORE May 2013
However, if the mod-sequence of any metadata item of the message is
greater than the specified UNCHANGEDSINCE value, then the requested
operation MUST NOT be performed. In this case, the mod-sequence
attribute of the message is not updated, and the message number (or
unique identifier in the case of the UID STORE command) is added to
the list of messages that failed the UNCHANGEDSINCE test.
When the server finished performing the operation on all the messages
in the message set, it checks for a non-empty list of messages that
failed the UNCHANGEDSINCE test. If this list is non-empty, the
server MUST return in the tagged response a MODIFIED response code.
The MODIFIED response code includes the message set (for STORE) or
set of UIDs (for UID STORE) of all messages that failed the
UNCHANGEDSINCE test.
All messages pass the UNCHANGEDSINCE test.
C: a103 UID STORE 6,4,8 (UNCHANGEDSINCE 12121230045)
+FLAGS.SILENT (\Deleted)
S: * 1 FETCH (UID 4 MODSEQ (12121231000))
S: * 2 FETCH (UID 6 MODSEQ (12121230852))
S: * 4 FETCH (UID 8 MODSEQ (12121130956))
S: a103 OK Conditional Store completed
Example 3
C: a104 STORE * (UNCHANGEDSINCE 12121230045) +FLAGS.SILENT
(\Deleted $Processed)
S: * 50 FETCH (MODSEQ (12111230047))
S: a104 OK Store (conditional) completed
Example 4
C: c101 STORE 50 (UNCHANGEDSINCE 12121230045) -FLAGS.SILENT
(\Deleted)
S: * OK [HIGHESTMODSEQ 12111230047]
S: * 50 FETCH (MODSEQ (12111230048))
S: c101 OK Store (conditional) completed
HIGHESTMODSEQ response code was sent by the server presumably because
this was the first CONDSTORE enabling command.
Example 5
In spite of the failure of the conditional STORE operation for
message 7, the server continues to process the conditional STORE in
order to find all messages that fail the test.
Melnikov Expires November 15, 2013 [Page 8]
Internet-Draft IMAP CONDSTORE May 2013
C: d105 STORE 7,5,9 (UNCHANGEDSINCE 320162338)
+FLAGS.SILENT (\Deleted)
S: * 5 FETCH (MODSEQ (320162350))
S: d105 OK [MODIFIED 7,9] Conditional STORE failed
Example 6
Same as above, but the server follows the SHOULD recommendation in
Section 6.4.6 of [RFC3501].
C: d105 STORE 7,5,9 (UNCHANGEDSINCE 320162338)
+FLAGS.SILENT (\Deleted)
S: * 7 FETCH (MODSEQ (320162342) FLAGS (\Seen \Deleted))
S: * 5 FETCH (MODSEQ (320162350))
S: * 9 FETCH (MODSEQ (320162349) FLAGS (\Answered))
S: d105 OK [MODIFIED 7,9] Conditional STORE failed
Use of UNCHANGEDSINCE with a modification sequence of 0 always fails
if the metadata item exists. A system flag MUST always be considered
existent, whether it was set or not.
Example 7
C: a102 STORE 12 (UNCHANGEDSINCE 0)
+FLAGS.SILENT ($MDNSent)
S: a102 OK [MODIFIED 12] Conditional STORE failed
The client has tested the presence of the $MDNSent user-defined
keyword.
Example 8
Note: A client trying to make an atomic change to the state of a
particular metadata item (or a set of metadata items) should be
prepared to deal with the case when the server returns the MODIFIED
response code if the state of the metadata item being watched hasn't
changed (but the state of some other metadata item has). This is
necessary, because some servers don't store separate mod-sequences
for different metadata items. However, a server implementation
SHOULD avoid generating spurious MODIFIED responses for +FLAGS/-FLAGS
STORE operations, even when the server stores a single mod-sequence
per message. Section 5 describes how this can be achieved.
Unless the server has included an unsolicited FETCH to update
client's knowledge about messages that have failed the UNCHANGEDSINCE
test, upon receipt of the MODIFIED response code, the client SHOULD
try to figure out if the required metadata items have indeed changed
by issuing FETCH or NOOP command. It is RECOMMENDED that the server
Melnikov Expires November 15, 2013 [Page 9]
Internet-Draft IMAP CONDSTORE May 2013
avoids the need for the client to do that by sending an unsolicited
FETCH response (Examples 9 and 10).
If the required metadata items haven't changed, the client SHOULD
retry the command with the new mod-sequence. The client SHOULD allow
for a configurable but reasonable number of retries (at least 2).
In the example below, the server returns the MODIFIED response code
without sending information describing why the STORE UNCHANGEDSINCE
operation has failed.
C: a106 STORE 100:150 (UNCHANGEDSINCE 212030000000)
+FLAGS.SILENT ($Processed)
S: * 100 FETCH (MODSEQ (303181230852))
S: * 102 FETCH (MODSEQ (303181230852))
...
S: * 150 FETCH (MODSEQ (303181230852))
S: a106 OK [MODIFIED 101] Conditional STORE failed
The flag $Processed was set on the message 101...
C: a107 NOOP
S: * 101 FETCH (MODSEQ (303011130956) FLAGS ($Processed))
S: a107 OK
Or the flag hasn't changed, but another has (note that this server
behaviour is discouraged. Server implementers should also see
Section 5)...
C: b107 NOOP
S: * 101 FETCH (MODSEQ (303011130956) FLAGS (\Deleted \Answered))
S: b107 OK
...and the client retries the operation for the message 101 with
the updated UNCHANGEDSINCE value
C: b108 STORE 101 (UNCHANGEDSINCE 303011130956)
+FLAGS.SILENT ($Processed)
S: * 101 FETCH (MODSEQ (303181230852))
S: b108 OK Conditional Store completed
Example 9
Same as above, but the server avoids the need for the client to poll
for changes.
Melnikov Expires November 15, 2013 [Page 10]
Internet-Draft IMAP CONDSTORE May 2013
The flag $Processed was set on the message 101 by another
client...
C: a106 STORE 100:150 (UNCHANGEDSINCE 212030000000)
+FLAGS.SILENT ($Processed)
S: * 100 FETCH (MODSEQ (303181230852))
S: * 101 FETCH (MODSEQ (303011130956) FLAGS ($Processed))
S: * 102 FETCH (MODSEQ (303181230852))
...
S: * 150 FETCH (MODSEQ (303181230852))
S: a106 OK [MODIFIED 101] Conditional STORE failed
Or the flag hasn't changed, but another has (note that this server
behaviour is discouraged. Server implementers should also see
Section 5)...
C: a106 STORE 100:150 (UNCHANGEDSINCE 212030000000)
+FLAGS.SILENT ($Processed)
S: * 100 FETCH (MODSEQ (303181230852))
S: * 101 FETCH (MODSEQ (303011130956) FLAGS (\Deleted \Answered))
S: * 102 FETCH (MODSEQ (303181230852))
...
S: * 150 FETCH (MODSEQ (303181230852))
S: a106 OK [MODIFIED 101] Conditional STORE failed
...and the client retries the operation for the message 101 with
the updated UNCHANGEDSINCE value
C: b108 STORE 101 (UNCHANGEDSINCE 303011130956)
+FLAGS.SILENT ($Processed)
S: * 101 FETCH (MODSEQ (303181230852))
S: b108 OK Conditional Store completed
Or the flag hasn't changed, but another has (nice server
behaviour. Server implementers should also see Section 5)...
C: a106 STORE 100:150 (UNCHANGEDSINCE 212030000000)
+FLAGS.SILENT ($Processed)
S: * 100 FETCH (MODSEQ (303181230852))
S: * 101 FETCH (MODSEQ (303011130956) FLAGS ($Processed \Deleted
\Answered))
S: * 102 FETCH (MODSEQ (303181230852))
...
S: * 150 FETCH (MODSEQ (303181230852))
S: a106 OK Conditional STORE completed
Example 10
Melnikov Expires November 15, 2013 [Page 11]
Internet-Draft IMAP CONDSTORE May 2013
The following example is based on the example from the Section 4.2.3
of [RFC2180] and demonstrates that the MODIFIED response code may be
also returned in the tagged NO response.
Client tries to conditionally STORE flags on a mixture of expunged
and non-expunged messages; one message fails the UNCHANGEDSINCE
test.
C: B001 STORE 1:7 (UNCHANGEDSINCE 320172338) +FLAGS (\SEEN)
S: * 1 FETCH (MODSEQ (320172342) FLAGS (\SEEN))
S: * 3 FETCH (MODSEQ (320172342) FLAGS (\SEEN))
S: B001 NO [MODIFIED 2] Some of the messages no longer exist.
C: B002 NOOP
S: * 4 EXPUNGE
S: * 4 EXPUNGE
S: * 4 EXPUNGE
S: * 4 EXPUNGE
S: * 2 FETCH (MODSEQ (320172340) FLAGS (\Deleted \Answered))
S: B002 OK NOOP Completed.
By receiving FETCH responses for messages 1 and 3, and EXPUNGE
responses that indicate that messages 4 through 7 have been
expunged, the client retries the operation only for the message 2.
The updated UNCHANGEDSINCE value is used.
C: b003 STORE 2 (UNCHANGEDSINCE 320172340) +FLAGS (\Seen)
S: * 2 FETCH (MODSEQ (320180050))
S: b003 OK Conditional Store completed
Example 11
Note: If a message is specified multiple times in the message set,
and the server doesn't internally eliminate duplicates from the
message set, it MUST NOT fail the conditional STORE operation for the
second (or subsequent) occurrence of the message if the operation
completed successfully for the first occurrence. For example, if the
client specifies:
e105 STORE 7,3:9 (UNCHANGEDSINCE 12121230045) +FLAGS.SILENT
(\Deleted)
the server must not fail the operation for message 7 as part of
processing "3:9" if it succeeded when message 7 was processed the
first time.
Melnikov Expires November 15, 2013 [Page 12]
Internet-Draft IMAP CONDSTORE May 2013
Once the client specified the UNCHANGEDSINCE modifier in a STORE
command, the server MUST include the MODSEQ fetch response data items
in all subsequent unsolicited FETCH responses.
This document also changes the behaviour of the server when it has
performed a STORE or UID STORE command and the UNCHANGEDSINCE
modifier is not specified. If the operation is successful for a
message, the server MUST update the mod-sequence attribute of the
message. The server is REQUIRED to include the mod-sequence value
whenever it decides to send the unsolicited FETCH response to all
CONDSTORE-aware clients that have opened the mailbox containing the
message.
Server implementers should also see Section 3.8 for additional
quality of implementation issues related to the STORE command.
3.3. FETCH and UID FETCH Commands
3.3.1. CHANGEDSINCE FETCH Modifier
This document defines the following FETCH modifier (see Section 2.4
of [RFC4466]):
CHANGEDSINCE <mod-sequence> CHANGEDSINCE FETCH modifier allows to
create a further subset of the list of messages described by
sequence set. The information described by message data items is
only returned for messages that have mod-sequence bigger than
<mod-sequence>.
When CHANGEDSINCE FETCH modifier is specified, it implicitly adds
MODSEQ FETCH message data item (Section 3.3.2).
C: s100 UID FETCH 1:* (FLAGS) (CHANGEDSINCE 12345)
S: * 1 FETCH (UID 4 MODSEQ (65402) FLAGS (\Seen))
S: * 2 FETCH (UID 6 MODSEQ (75403) FLAGS (\Deleted))
S: * 4 FETCH (UID 8 MODSEQ (29738) FLAGS ($NoJunk $AutoJunk
$MDNSent))
S: s100 OK FETCH completed
Example 12
3.3.2. MODSEQ Message Data Item in FETCH Command
This extension adds a MODSEQ message data item to the FETCH command.
The MODSEQ message data item allows clients to retrieve mod-sequence
values for a range of messages in the currently selected mailbox.
Melnikov Expires November 15, 2013 [Page 13]
Internet-Draft IMAP CONDSTORE May 2013
Once the client specified the MODSEQ message data item in a FETCH
request, the server MUST include the MODSEQ fetch response data items
in all subsequent unsolicited FETCH responses.
Syntax: MODSEQ The MODSEQ message data item causes the server to
return MODSEQ fetch response data items.
Syntax: MODSEQ ( <permsg-modsequence> ) MODSEQ response data items
contain per-message mod-sequences.
The MODSEQ response data item is returned if the client issued
FETCH with MODSEQ message data item. It also allows the server to
notify the client about mod-sequence changes caused by conditional
STOREs (Section 3.2) and/or changes caused by external sources.
C: a FETCH 1:3 (MODSEQ)
S: * 1 FETCH (MODSEQ (624140003))
S: * 2 FETCH (MODSEQ (624140007))
S: * 3 FETCH (MODSEQ (624140005))
S: a OK Fetch complete
In this example, the client requests per-message mod-sequences for a
set of messages.
Example 13
When a flag for a message is modified in a different session, the
server sends an unsolicited FETCH response containing the mod-
sequence for the message.
(Session 1, authenticated as a user "alex"). The user adds a
shared flag \Deleted:
C: A142 SELECT INBOX
...
S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft)
S: * OK [PERMANENTFLAGS (\Answered \Deleted \Seen \*)] Limited
...
C: A160 STORE 7 +FLAGS.SILENT (\Deleted)
S: * 7 FETCH (MODSEQ (2121231000))
S: A160 OK Store completed
(Session 2, also authenticated as the user "alex"). Any changes
to flags are always reported to all sessions authenticated as the
same user as in the session 1.
C: C180 NOOP
S: * 7 FETCH (FLAGS (\Deleted \Answered) MODSEQ (12121231000))
Melnikov Expires November 15, 2013 [Page 14]
Internet-Draft IMAP CONDSTORE May 2013
S: C180 OK Noop completed
(Session 3, authenticated as a user "andrew"). As \Deleted is a
shared flag, changes in session 1 are also reported in session 3:
C: D210 NOOP
S: * 7 FETCH (FLAGS (\Deleted \Answered) MODSEQ (12121231000))
S: D210 OK Noop completed
The user modifies a private flag \Seen in session 1...
C: A240 STORE 7 +FLAGS.SILENT (\Seen)
S: * 7 FETCH (MODSEQ (12121231777))
S: A240 OK Store completed
...which is only reported in session 2...
C: C270 NOOP
S: * 7 FETCH (FLAGS (\Deleted \Answered \Seen) MODSEQ
(12121231777))
S: C270 OK Noop completed
...but not in session 3.
C: D300 NOOP
S: D300 OK Noop completed
And finally, the user removes flags \Answered (shared) and \Seen
(private) in session 1.
C: A330 STORE 7 -FLAGS.SILENT (\Answered \Seen)
S: * 7 FETCH (MODSEQ (12121245160))
S: A330 OK Store completed
Both changes are reported in the session 2...
C: C360 NOOP
S: * 7 FETCH (FLAGS (\Deleted) MODSEQ (12121245160))
S: C360 OK Noop completed
...and only changes to shared flags are reported in session 3.
C: D390 NOOP
S: * 7 FETCH (FLAGS (\Deleted) MODSEQ (12121245160))
S: D390 OK Noop completed
Example 14
Melnikov Expires November 15, 2013 [Page 15]
Internet-Draft IMAP CONDSTORE May 2013
Server implementers should also see Section 3.8 for additional
quality of implementation issues related to the FETCH command.
3.3.3. MODSEQ Search Criterion in SEARCH
The MODSEQ criterion for the SEARCH command allows a client to search
for the metadata items that were modified since a specified moment.
Syntax: MODSEQ [<entry-name> <entry-type-req>] <mod-sequence-valzer>
Messages that have modification values that are equal to or
greater than <mod-sequence-valzer>. This allows a client, for
example, to find out which messages contain metadata items that
have changed since the last time it updated its disconnected
cache. The client may also specify <entry-name> (name of metadata
item) and <entry-type-req> (type of metadata item) before <mod-
sequence-valzer>. <entry-type-req> can be one of "shared", "priv"
(private), or "all". The latter means that the server should use
the biggest value among "priv" and "shared" mod- sequences for the
metadata item. If the server doesn't store internally separate
mod-sequences for different metadata items, it MUST ignore <entry-
name> and <entry-type-req>. Otherwise, the server should use them
to narrow down the search.
For a flag <flagname>, the corresponding <entry-name> has a form "
/flags/<flagname>" as defined in [RFC4466]. Note that the leading
"\" character that denotes a system flag has to be escaped as per
Section 4.3 of [RFC3501], as the <entry-name> uses syntax for
quoted strings.
If client specifies a MODSEQ criterion in a SEARCH command and the
server returns a non-empty SEARCH result, the server MUST also append
(to the end of the untagged SEARCH response) the highest mod-sequence
for all messages being returned. See also Section 3.5.
C: a SEARCH MODSEQ "/flags/\\draft" all 620162338
S: * SEARCH 2 5 6 7 11 12 18 19 20 23 (MODSEQ 917162500)
S: a OK Search complete
In the above example, the message numbers of any messages containing
the string "IMAP4" in the "value" attribute of the "/comment" entry
and having a mod-sequence equal to or greater than 620162338 for the
"\Draft" flag are returned in the search results.
Example 15
C: t SEARCH OR NOT MODSEQ 720162338 LARGER 50000
S: * SEARCH
Melnikov Expires November 15, 2013 [Page 16]
Internet-Draft IMAP CONDSTORE May 2013
S: t OK Search complete, nothing found
Example 16
3.3.4. Modified SEARCH Untagged Response
Data: zero or more numbers
mod-sequence value (omitted if no match)
This document extends syntax of the untagged SEARCH response to
include the highest mod-sequence for all messages being returned.
If a client specifies a MODSEQ criterion in a SEARCH (or UID SEARCH)
command and the server returns a non-empty SEARCH result, the server
MUST also append (to the end of the untagged SEARCH response) the
highest mod-sequence for all messages being returned. See
Section 3.4 for examples.
3.3.5. HIGHESTMODSEQ Status Data Items
This document defines a new status data item:
HIGHESTMODSEQ The highest mod-sequence value of all messages in the
mailbox. This is the same value that is returned by the server in
the HIGHESTMODSEQ response code in an OK untagged response (see
Section 3.1.1). If the server doesn't support the persistent
storage of mod-sequences for the mailbox (see Section 3.1.2), the
server MUST return 0 as the value of HIGHESTMODSEQ status data
item.
C: A042 STATUS blurdybloop (UIDNEXT MESSAGES HIGHESTMODSEQ)
S: * STATUS blurdybloop (MESSAGES 231 UIDNEXT 44292
HIGHESTMODSEQ 7011231777)
S: A042 OK STATUS completed
Example 17
3.3.6. CONDSTORE Parameter to SELECT and EXAMINE
The CONDSTORE extension defines a single optional select parameter,
"CONDSTORE", which tells the server that it MUST include the MODSEQ
fetch response data items in all subsequent unsolicited FETCH
responses.
The CONDSTORE parameter to SELECT/EXAMINE helps avoid a race
condition that might arise when one or more metadata items are
modified in another session after the server has sent the
Melnikov Expires November 15, 2013 [Page 17]
Internet-Draft IMAP CONDSTORE May 2013
HIGHESTMODSEQ response code and before the client was able to issue a
CONDSTORE enabling command.
C: A142 SELECT INBOX (CONDSTORE)
S: * 172 EXISTS
S: * 1 RECENT
S: * OK [UNSEEN 12] Message 12 is first unseen
S: * OK [UIDVALIDITY 3857529045] UIDs valid
S: * OK [UIDNEXT 4392] Predicted next UID
S: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft)
S: * OK [PERMANENTFLAGS (\Deleted \Seen \*)] Limited
S: * OK [HIGHESTMODSEQ 715194045007]
S: A142 OK [READ-WRITE] SELECT completed, CONDSTORE is now enabled
Example 18
3.3.7. Additional Quality-of-Implementation Issues
Server implementations should follow the following rule, which
applies to any successfully completed STORE/UID STORE (with and
without UNCHANGEDSINCE modifier), as well as to a FETCH command that
implicitly sets \Seen flag:
Adding the flag when it is already present or removing when it is
not present SHOULD NOT change the mod-sequence.
This will prevent spurious client synchronization requests.
However, note that client implementers MUST NOT rely on this server
behavior. A client can't distinguish between the case when a server
has violated the SHOULD mentioned above, and that when one or more
clients set and unset (or unset and set) the flag in another session.
4. Formal Syntax
The following syntax specification uses the Augmented Backus-Naur
Form (ABNF) [RFC5234] notation. Elements not defined here can be
found in the formal syntax of the ABNF [RFC5234], IMAP [RFC3501], and
IMAP ABNF extensions [RFC4466] specifications.
Except as noted otherwise, all alphabetic characters are case-
insensitive. The use of upper- or lowercase characters to define
token strings is for editorial clarity only. Implementations MUST
accept these strings in a case-insensitive fashion.
capability =/ "CONDSTORE"
status-att =/ "HIGHESTMODSEQ"
Melnikov Expires November 15, 2013 [Page 18]
Internet-Draft IMAP CONDSTORE May 2013
;; extends non-terminal defined in RFC 3501.
status-att-val =/ "HIGHESTMODSEQ" SP mod-sequence-valzer
;; extends non-terminal defined in [RFC4466].
;; Value 0 denotes that the mailbox doesn't
;; support persistent mod-sequences
;; as described in Section 3.1.2
store-modifier =/ "UNCHANGEDSINCE" SP mod-sequence-valzer
;; Only a single "UNCHANGEDSINCE" may be
;; specified in a STORE operation
fetch-modifier =/ chgsince-fetch-mod
;; conforms to the generic "fetch-modifier"
;; syntax defined in [RFC4466].
chgsince-fetch-mod = "CHANGEDSINCE" SP mod-sequence-value
;; CHANGEDSINCE FETCH modifier conforms to
;; the fetch-modifier syntax
fetch-att =/ fetch-mod-sequence
;; modifies original IMAP4 fetch-att
fetch-mod-sequence = "MODSEQ"
fetch-mod-resp = "MODSEQ" SP "(" permsg-modsequence ")"
msg-att-dynamic =/ fetch-mod-resp
search-key =/ search-modsequence
;; modifies original IMAP4 search-key
;;
;; This change applies to all commands
;; referencing this non-terminal, in
;; particular SEARCH.
search-modsequence = "MODSEQ" [search-modseq-ext] SP
mod-sequence-valzer
search-modseq-ext = SP entry-name SP entry-type-req
resp-text-code =/ "HIGHESTMODSEQ" SP mod-sequence-value /
"NOMODSEQ" /
"MODIFIED" SP sequence-set
entry-name = entry-flag-name
entry-flag-name = DQUOTE "/flags/" attr-flag DQUOTE
Melnikov Expires November 15, 2013 [Page 19]
Internet-Draft IMAP CONDSTORE May 2013
;; each system or user defined flag <flag>
;; is mapped to "/flags/<flag>".
;;
;; <entry-flag-name> follows the escape rules
;; used by "quoted" string as described in
;; Section 4.3 of [RFC3501], e.g., for the flag
;; \Seen the corresponding <entry-name> is
;; "/flags/\\seen", and for the flag
;; $MDNSent, the corresponding <entry-name>
;; is "/flags/$mdnsent".
entry-type-resp = "priv" / "shared"
;; metadata item type
entry-type-req = entry-type-resp / "all"
;; perform SEARCH operation on private
;; metadata item, shared metadata item or both
permsg-modsequence = mod-sequence-value
;; per message mod-sequence
mod-sequence-value = 1*DIGIT
;; Positive unsigned 64-bit integer
;; (mod-sequence)
;; (1 <= n < 18,446,744,073,709,551,615)
mod-sequence-valzer = "0" / mod-sequence-value
search-sort-mod-seq = "(" "MODSEQ" SP mod-sequence-value ")"
select-param =/ condstore-param
;; conforms to the generic "select-param"
;; non-terminal syntax defined in [RFC4466].
condstore-param = "CONDSTORE"
mailbox-data =/ "SEARCH" [1*(SP nz-number) SP
search-sort-mod-seq]
attr-flag = "\\Answered" / "\\Flagged" / "\\Deleted" /
"\\Seen" / "\\Draft" / attr-flag-keyword /
attr-flag-extension
;; Does not include "\\Recent"
attr-flag-extension = "\\" atom
;; Future expansion. Client implementations
;; MUST accept flag-extension flags. Server
;; implementations MUST NOT generate
Melnikov Expires November 15, 2013 [Page 20]
Internet-Draft IMAP CONDSTORE May 2013
;; flag-extension flags except as defined by
;; future standard or standards-track
;; revisions of [RFC3501].
attr-flag-keyword = atom
5. Server Implementation Considerations
This section describes how a server implementation that doesn't store
separate per-metadata mod-sequences for different metadata items can
avoid sending the MODIFIED response to any of the following
conditional STORE operations:
+FLAGS
-FLAGS
+FLAGS.SILENT
-FLAGS.SILENT
Note that the optimization described in this section can't be
performed in case of a conditional STORE FLAGS operation.
Let's use the following example. The client has issued
C: a106 STORE 100:150 (UNCHANGEDSINCE 212030000000)
+FLAGS.SILENT ($Processed)
When the server receives the command and parses it successfully, it
iterates through the message set and tries to execute the conditional
STORE command for each message.
Each server internally works as a client, i.e., it has to cache the
current state of all IMAP flags as it is known to the client. In
order to report flag changes to the client, the server compares the
cached values with the values in its database for IMAP flags.
Imagine that another client has changed the state of a flag \Deleted
on the message 101 and that the change updated the mod-sequence for
the message. The server knows that the mod-sequence for the mailbox
has changed; however, it also knows that:
a. the client is not interested in \Deleted flag, as it hasn't
included it in +FLAGS.SILENT operation; and
Melnikov Expires November 15, 2013 [Page 21]
Internet-Draft IMAP CONDSTORE May 2013
b. the state of the flag $Processed hasn't changed (the server can
determine this by comparing cached flag state with the state of
the flag in the database).
Therefore, the server doesn't have to report MODIFIED to the client.
Instead, the server may set $Processed flag, update the mod-sequence
for the message 101 once again and send an untagged FETCH response
with new mod-sequence and flags:
S: * 101 FETCH (MODSEQ (303011130956)
FLAGS ($Processed \Deleted \Answered))
See also Section 3.8 for additional quality-of-implementation issues.
6. Security Considerations
It is believed that the Conditional STORE extension doesn't raise any
new security concerns that are not already discussed in [RFC3501].
However, the availability of this extension may make it possible for
IMAP4 to be used in critical applications it could not be used for
previously, making correct IMAP server implementation and operation
even more important.
7. IANA Considerations
IMAP4 capabilities are registered by publishing a standards track or
IESG approved experimental RFC. The registry is currently located
at:
http://www.iana.org/assignments/imap4-capabilities
This document defines the CONDSTORE IMAP capability. IANA has added
it to the registry accordingly.
8. Acknowledgements
Some text was borrowed from "IMAP ANNOTATE Extension" [RFC5257] by
Randall Gellens and Cyrus Daboo and from "ACAP -- Application
Configuration Access Protocol" [RFC2244] by Chris Newman and John
Myers.
Many thanks to Randall Gellens for his thorough review of the
document.
Melnikov Expires November 15, 2013 [Page 22]
Internet-Draft IMAP CONDSTORE May 2013
The authors also acknowledge the feedback provided by Cyrus Daboo,
Larry Greenfield, Chris Newman, Harrie Hazewinkel, Arnt Gulbrandsen,
Timo Sirainen, Mark Crispin, Ned Freed, Ken Murchison, and Dave
Cridland.
9. References
9.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION
4rev1", RFC 3501, March 2003.
[RFC4466] Melnikov, A. and C. Daboo, "Collected Extensions to IMAP4
ABNF", RFC 4466, April 2006.
[RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234, January 2008.
9.2. Informative References
[RFC1305] Mills, D., "Network Time Protocol (Version 3)
Specification, Implementation", RFC 1305, March 1992.
[RFC2180] Gahrns, M., "IMAP4 Multi-Accessed Mailbox Practice", RFC
2180, July 1997.
[RFC2244] Newman, C. and J.G. Myers, "ACAP -- Application
Configuration Access Protocol", RFC 2244, November 1997.
[RFC4314] Melnikov, A., "IMAP4 Access Control List (ACL) Extension",
RFC 4314, December 2005.
[RFC5257] Daboo, C. and R. Gellens, "Internet Message Access
Protocol - ANNOTATE Extension", RFC 5257, June 2008.
Author's Address
Alexey Melnikov
Isode Ltd.
Melnikov Expires November 15, 2013 [Page 23]
