Internet DRAFT - draft-perreault-behave-new-nat-mib
draft-perreault-behave-new-nat-mib
Network Working Group S. Perreault
Internet-Draft Viagenie
Intended status: Standards Track T. Tsou
Expires: October 13, 2012 Huawei Technologies (USA)
S. Sivakumar
Cisco Systems
April 11, 2012
Additional Definitions of Managed Objects for Network Address
Translators (NAT)
draft-perreault-behave-new-nat-mib-00
Abstract
This memo defines a portion of the Management Information Base (MIB)
for devices implementing Network Address Translator (NAT) function.
This MIB module may be used for monitoring of a device capable of NAT
function.
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on October 13, 2012.
Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
Perreault, et al. Expires October 13, 2012 [Page 1]
Internet-Draft NEW NAT MIB April 2012
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. Security Considerations . . . . . . . . . . . . . . . . . . . 15
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 15
6. References . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.1. Normative References . . . . . . . . . . . . . . . . . . . 16
6.2. Informative References . . . . . . . . . . . . . . . . . . 16
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 16
Perreault, et al. Expires October 13, 2012 [Page 2]
Internet-Draft NEW NAT MIB April 2012
1. Introduction
[RFC4008] defines some objects for managing network address
translators (NATs). Current operational practice often requires
additional objects, in particular for enterprise and Internet service
provider (ISP) deployments. This document defines those additional
objects.
This module is designed to be completely independent from [RFC4008].
A NAT implementation could be managed using this module, the one from
[RFC4008], or both.
Note: "CGN" features are currently left out of this MIB. Such
features include anything related to "subscribers": per-subscriber
counters, limits, etc. They will either be added to this draft or
will be specified in a separate draft. Stay tuned.
2. Overview
New features in this module are as follows:
Counters: Many new counters are introduced. Most of them are
available in two variants: global and per-transport protocol.
Limits: A few limits on the quantity of state data stored by the NAT
device. Some of them can trigger notifications.
Address+Port Pools: Pools of external addresses and ports are often
used in enterprise and ISP settings. Pools are listed in a table,
each with its range of addresses and ports. It is possible to
inspect each pool's usage, to set limits, and to receive
notifications when thresholds are crossed.
Address Mappings: NATs that have an "IP address pooling" behavior of
"Paired" [RFC4787] maintain a mapping from internal address to
external address. This module allows inspection of this mapping
table.
3. Definitions
This MIB module IMPORTs objects from [RFC2578], [RFC2579], and
[RFC4001].
NEW-NAT-MIB DEFINITIONS ::= BEGIN
IMPORTS
Perreault, et al. Expires October 13, 2012 [Page 3]
Internet-Draft NEW NAT MIB April 2012
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Counter64, Gauge32,
Integer32, Unsigned32, mib-2
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC
InetAddressType, InetAddress, InetPortNumber
FROM INET-ADDRESS-MIB;
newNatMIB MODULE-IDENTITY
LAST-UPDATED "200001010000Z"
ORGANIZATION "TBD"
CONTACT-INFO "TBD"
DESCRIPTION
"This MIB module defines generic managed objects for NAT."
REVISION "200001010000Z"
DESCRIPTION
"Dummy version. RFC Editor must replace this."
::= { mib-2 9999 }
-- table of contents
newNatNotifications OBJECT IDENTIFIER ::= { newNatMIB 0 }
newNatObjects OBJECT IDENTIFIER ::= { newNatMIB 1 }
newNatCounters OBJECT IDENTIFIER ::= { newNatObjects 1 }
newNatLimits OBJECT IDENTIFIER ::= { newNatObjects 2 }
newNatPoolObjects OBJECT IDENTIFIER ::= { newNatObjects 3 }
newNatMapObjects OBJECT IDENTIFIER ::= { newNatObjects 4 }
newNatConformance OBJECT IDENTIFIER ::= { newNatMIB 2 }
newNatGroups OBJECT IDENTIFIER ::= { newNatConformance 1 }
newNatCompliance OBJECT IDENTIFIER ::= { newNatConformance 2 }
-- TODO: We need to be able to manage multiple NATs (with possible
-- overlapping address space) with a single SNMP agent.
-- textual conventions
ProtocolNumber ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A transport protocol number, from the 'protocol-numbers' IANA
registry."
SYNTAX Unsigned32 (0..255)
Perreault, et al. Expires October 13, 2012 [Page 4]
Internet-Draft NEW NAT MIB April 2012
NatPoolIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"A unique ID that is assigned to each pool."
SYNTAX Unsigned32 (1..4294967295)
-- notifications
newNatNotifPoolWatermarkLow NOTIFICATION-TYPE
OBJECTS { newNatPoolIndex }
STATUS current
DESCRIPTION
"This notification is generated when the specified pool's number
of free addresses becomes lower than or equal to the specified
threshold. The threshold is specified by the
newNatPoolWatermarkLow object"
::= { newNatNotifications 1 }
newNatNotifPoolWatermarkHigh NOTIFICATION-TYPE
OBJECTS { newNatPoolIndex }
STATUS current
DESCRIPTION
"This notification is generated when the specified pool's number
of free addresses becomes greater than or equal to the
specified threshold. The threshold is specified by the
newNatPoolWatermarkHigh object"
::= { newNatNotifications 2 }
newNatNotifLimitMappings NOTIFICATION-TYPE
OBJECTS { newNatCntMappings }
STATUS current
DESCRIPTION
"This notification is generated when newNatCntMappings exceeds
the value of newNatLimitMappings."
::= { newNatNotifications 3 }
newNatNotifLimitAddrMappings NOTIFICATION-TYPE
OBJECTS { newNatCntAddressMappings }
STATUS current
DESCRIPTION
"This notification is generated when newNatCntAddressMappings
exceeds the value of newNatLimitAddressMappings."
::= { newNatNotifications 4 }
-- counters
Perreault, et al. Expires October 13, 2012 [Page 5]
Internet-Draft NEW NAT MIB April 2012
newNatCntTranslates OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets to which NAT has been applied."
::= { newNatCounters 1 }
newNatCntOOP OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets to which NAT could not be applied because
no external port was available."
::= { newNatCounters 2 }
newNatCntResource OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets to which NAT could not be applied because
of resource constraints (excluding out-of-ports condition)."
::= { newNatCounters 3 }
newNatCntStateMismatch OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets to which NAT could not be applied because
of mapping state mismatch. For example, a TCP packet that
matches an existing mapping but is dropped because its flags
are incompatible with the current state of the mapping would
cause this counter to be incremented."
::= { newNatCounters 4 }
newNatCntQuota OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets to which NAT could not be applied because
of exceeded quotas. Quotas include absolute limits as well as
limits on rate of allocation."
::= { newNatCounters 5 }
Perreault, et al. Expires October 13, 2012 [Page 6]
Internet-Draft NEW NAT MIB April 2012
newNatCntMappings OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active mappings.
Equal to newNatCntMapRemovals - newNatCntMapCreations."
::= { newNatCounters 6 }
newNatCntMapCreations OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of mapping creations. This includes static mappings."
::= { newNatCounters 7 }
newNatCntMapRemovals OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of mapping removals. This includes static mappings."
::= { newNatCounters 8 }
newNatCntAddressMappings OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active address mappings.
Equal to newNatCntAddrMapRemovals - newNatCntAddrMapCreations."
::= { newNatCounters 9 }
newNatCntAddrMapCreations OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of address mapping creations. This includes static
mappings."
::= { newNatCounters 10 }
newNatCntAddrMapRemovals OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
Perreault, et al. Expires October 13, 2012 [Page 7]
Internet-Draft NEW NAT MIB April 2012
STATUS current
DESCRIPTION
"Number of address mapping removals. This includes static
mappings."
::= { newNatCounters 11 }
newNatCntProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF NewNatCntProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of protocols with per-protocol counters."
::= { newNatCounters 128 }
newNatCntProtocolEntry OBJECT-TYPE
SYNTAX NewNatCntProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Per-protocol counters."
INDEX { newNatCntProtocolNumber }
::= { newNatCntProtocolTable 1 }
NewNatCntProtocolEntry ::=
SEQUENCE {
newNatCntProtocolNumber ProtocolNumber,
newNatCntProtocolTranslates Counter64,
newNatCntProtocolOOP Counter64,
newNatCntProtocolResource Counter64,
newNatCntProtocolStateMismatch Counter64,
newNatCntProtocolQuota Counter64,
newNatCntProtocolMappings Gauge32,
newNatCntProtocolMapCreations Counter64,
newNatCntProtocolMapRemovals Counter64
}
newNatCntProtocolNumber OBJECT-TYPE
SYNTAX ProtocolNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Counters in this conceptual row apply to packets using the
transport protocol identified by this object's value."
::= { newNatCntProtocolEntry 1 }
newNatCntProtocolTranslates OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
Perreault, et al. Expires October 13, 2012 [Page 8]
Internet-Draft NEW NAT MIB April 2012
STATUS current
DESCRIPTION
"The number of packets to which NAT has been applied."
::= { newNatCntProtocolEntry 2 }
newNatCntProtocolOOP OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets to which NAT could not be applied because
no external port was available."
::= { newNatCntProtocolEntry 3 }
newNatCntProtocolResource OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets to which NAT could not be applied because
of resource constraints (excluding out-of-ports condition)."
::= { newNatCntProtocolEntry 4 }
newNatCntProtocolStateMismatch OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets to which NAT could not be applied because
of state table mismatch. For example, a TCP packet that matches
an existing mapping but is dropped because its flags are
incompatible with the current state of the mapping would cause
this counter to be incremented."
::= { newNatCntProtocolEntry 5 }
newNatCntProtocolQuota OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets to which NAT could not be applied because
of exceeded quotas. Quotas include absolute limits as well as
limits on rate of allocation."
::= { newNatCntProtocolEntry 6 }
newNatCntProtocolMappings OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
Perreault, et al. Expires October 13, 2012 [Page 9]
Internet-Draft NEW NAT MIB April 2012
STATUS current
DESCRIPTION
"Number of active mappings.
Equal to newNatCntMapRemovals - newNatCntMapCreations."
::= { newNatCntProtocolEntry 7 }
newNatCntProtocolMapCreations OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of mapping creations. This includes static mappings."
::= { newNatCntProtocolEntry 8 }
newNatCntProtocolMapRemovals OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of mapping removals. This includes statis mappings."
::= { newNatCntProtocolEntry 9 }
-- limits
newNatLimitMappings OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global limit on the total number of mappings. Zero means
unlimited."
::= { newNatLimits 1 }
-- TODO: How does that work with bulk port allocation?
newNatLimitAddressMappings OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global limit on the total number of internal-to-external
address mappings. Zero means unlimited.
This limit is only applicable to NATs that have an 'IP address
pooling' behavior of 'Paired' [RFC4787]."
::= { newNatLimits 2 }
Perreault, et al. Expires October 13, 2012 [Page 10]
Internet-Draft NEW NAT MIB April 2012
newNatLimitFragments OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global limit on the total number of fragments pending
reassembly. Zero means unlimited.
This limit is only applicable to NATs having 'Receive
Fragments Out of Order' behavior [RFC4787]."
::= { newNatLimits 3 }
-- pools
newNatPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF NewNatPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of pools."
::= { newNatPoolObjects 1 }
newNatPoolEntry OBJECT-TYPE
SYNTAX NewNatPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table of pools."
INDEX { newNatPoolIndex }
::= { newNatPoolTable 1 }
NewNatPoolEntry ::=
SEQUENCE {
newNatPoolIndex NatPoolIndex,
newNatPoolUsage Integer32,
newNatPoolWatermarkLow Integer32,
newNatPoolWatermarkHigh Integer32,
newNatPoolPortMin InetPortNumber,
newNatPoolPortMax InetPortNumber
-- TODO: virtual router ID, status, ref count, etc.
}
newNatPoolIndex OBJECT-TYPE
SYNTAX NatPoolIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
Perreault, et al. Expires October 13, 2012 [Page 11]
Internet-Draft NEW NAT MIB April 2012
"Index of an address pool."
::= { newNatPoolEntry 1 }
newNatPoolUsage OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of the pool's total number of external ports
currently mapped."
::= { newNatPoolEntry 2 }
newNatPoolWatermarkLow OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Low watermark on a pool's usage, in percentage of the total
number of ports available. If set to -1, the watermark is
disabled. Otherwise when newNatPoolUsage becomes lower than or
equal to newNatPoolWatermarkLow, a notification is sent. The
NAT may also start behaving in low usage mode (this is
implementation-defined)."
::= { newNatPoolEntry 3 }
newNatPoolWatermarkHigh OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"High watermark on a pool's usage, in percentage of the total
number of ports available. If set to -1, the watermark is
disabled. Otherwise, when newNatPoolUsage becomes higher than
or equal to newNatPoolWatermarkHigh, a notification is sent.
The NAT may also start behaving in high usage mode (this is
implementation-defined)."
::= { newNatPoolEntry 4 }
newNatPoolPortMin OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimal port number to be allocated in this pool."
::= { newNatPoolEntry 5 }
newNatPoolPortMax OBJECT-TYPE
SYNTAX InetPortNumber
Perreault, et al. Expires October 13, 2012 [Page 12]
Internet-Draft NEW NAT MIB April 2012
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximal port number to be allocated in this pool."
::= { newNatPoolEntry 6 }
newNatPoolRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF NewNatPoolRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains address ranges used by pool entries."
::= { newNatPoolObjects 2 }
newNatPoolRangeEntry OBJECT-TYPE
SYNTAX NewNatPoolRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NAT pool address range."
INDEX { newNatPoolRangeType,
newNatPoolRangeBegin,
newNatPoolRangeEnd }
::= { newNatPoolRangeTable 1 }
NewNatPoolRangeEntry ::=
SEQUENCE {
newNatPoolRangeType InetAddressType,
newNatPoolRangeBegin InetAddress,
newNatPoolRangeEnd InetAddress,
newNatPoolRangeAllocatedPorts Gauge32
-- TODO: the usual bookkeeping things
}
newNatPoolRangeType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type of newNatPoolRangeBegin and
newNatPoolRangeEnd."
::= { newNatPoolRangeEntry 1 }
newNatPoolRangeBegin OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
Perreault, et al. Expires October 13, 2012 [Page 13]
Internet-Draft NEW NAT MIB April 2012
DESCRIPTION
"Lowest address included in this range."
::= { newNatPoolRangeEntry 2 }
newNatPoolRangeEnd OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Highest address included in this range."
::= { newNatPoolRangeEntry 3 }
newNatPoolRangeAllocatedPorts OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ports currently allocated on the addresses in this
range."
::= { newNatPoolRangeEntry 4 }
-- address mappings
newNatMapIntAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NewNatMapIntAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of mappings from internal to external address.
This table is only applicable to NATs that have an 'IP address
pooling' behavior of 'Paired' [RFC4787]."
::= { newNatMapObjects 1 }
newNatMapIntAddrEntry OBJECT-TYPE
SYNTAX NewNatMapIntAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Mapping from internal to external address."
INDEX { newNatMapIntAddrType,
newNatMapIntAddrInt }
::= { newNatMapIntAddrTable 1 }
NewNatMapIntAddrEntry ::=
SEQUENCE {
newNatMapIntAddrType InetAddressType,
Perreault, et al. Expires October 13, 2012 [Page 14]
Internet-Draft NEW NAT MIB April 2012
newNatMapIntAddrInt InetAddress,
newNatMapIntAddrExt InetAddress
}
newNatMapIntAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Address type for newNatMapIntAddrInt and newNatMapIntAddrExt."
::= { newNatMapIntAddrEntry 1 }
newNatMapIntAddrInt OBJECT-TYPE
SYNTAX InetAddress (SIZE (4|16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internal address."
::= { newNatMapIntAddrEntry 2 }
newNatMapIntAddrExt OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"External address."
::= { newNatMapIntAddrEntry 3 }
-- conformance groups
-- TBD
END
4. Security Considerations
TBD
5. IANA Considerations
TBD
6. References
Perreault, et al. Expires October 13, 2012 [Page 15]
Internet-Draft NEW NAT MIB April 2012
6.1. Normative References
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2",
STD 58, RFC 2579, April 1999.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
[RFC4787] Audet, F. and C. Jennings, "Network Address Translation
(NAT) Behavioral Requirements for Unicast UDP", BCP 127,
RFC 4787, January 2007.
6.2. Informative References
[RFC4008] Rohit, R., Srisuresh, P., Raghunarayan, R., Pai, N., and
C. Wang, "Definitions of Managed Objects for Network
Address Translators (NAT)", RFC 4008, March 2005.
Authors' Addresses
Simon Perreault
Viagenie
246 Aberdeen
Quebec, QC G1R 2E1
Canada
Phone: +1 418 656 9254
Email: simon.perreault@viagenie.ca
URI: http://viagenie.ca
Tina Tsou
Huawei Technologies (USA)
2330 Central Expressway
Santa Clara, CA 95050
USA
Phone: +1 408 330 4424
Email: tina.tsou.zouting@huawei.com
Perreault, et al. Expires October 13, 2012 [Page 16]
Internet-Draft NEW NAT MIB April 2012
Senthil Sivakumar
Cisco Systems
7100-8 Kit Creek Road
Research Triangle Park, North Carolina 27709
USA
Phone: +1 919 392 5158
Email: ssenthil@cisco.com
Perreault, et al. Expires October 13, 2012 [Page 17]
