Internet DRAFT - draft-sullivan-dnssd-label-miprofile
draft-sullivan-dnssd-label-miprofile
IETF A. Sullivan
Internet-Draft Dyn
Intended status: Informational October 18, 2013
Expires: April 21, 2014
Using Labels With DNS-Based Service Discovery, mDNS, and DNS
draft-sullivan-dnssd-label-miprofile-00
Abstract
Despite its name, DNS-Based Service Discovery can use naming systems
other than the Domain Name System when looking for services.
Different name systems use different conventions for the characters
allowed in any name. In order for DNS-SD to be used effectively in
environments where multiple different name systems are in use, it is
important to follow a common set of conventions for naming. This
memo presents a convention for maximizing such interoperability.
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on April 21, 2014.
Copyright Notice
Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
Sullivan Expires April 21, 2014 [Page 1]
Internet-Draft Labels for DNS-SD October 2013
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Conventions and terms used in this document . . . . . . . . 3
2. The MI Profile . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1. The MI Profile and DNS-SD . . . . . . . . . . . . . . . . . 4
2.1.1. The <Instance> Portion of the Service Instance Name . . 5
2.1.2. The <Service> Portion of the Service Instance Name . . 6
2.1.3. The MI Profile and the <Domain> Portion of the
Service Instance Name . . . . . . . . . . . . . . . . . 6
3. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 7
4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 7
5. Security Considerations . . . . . . . . . . . . . . . . . . . . 7
6. References . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6.1. Normative References . . . . . . . . . . . . . . . . . . . 7
6.2. Informative References . . . . . . . . . . . . . . . . . . 7
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 8
Sullivan Expires April 21, 2014 [Page 2]
Internet-Draft Labels for DNS-SD October 2013
1. Introduction
DNS-Based Service Discovery (DNS-SD, [RFC6763]) specifies a mechanism
for discovering services using queries both to the Domain Name System
(DNS, [RFC1034], [RFC1035]) and to Multicast DNS (mDNS, [RFC6762]).
Conventional use of the DNS generally follows the host name rules
[RFC0952] for labels -- the so-called LDH rule. That convention is
the reason behind the development of Internationalized Domain Names
for Applications (IDNA2008, [RFC5890], [RFC5891], [RFC5892],
[RFC5893], [RFC5894], [RFC5895]). It is worth noting that the LDH
rule is a convention, and not a strict rule of the DNS. It is
assumed to be true widely enough, however, that in many circumstances
names cannot be used unless they cleave to the LDH rule.
At the same time, mDNS requires that labels be encoded in UTF-8, and
permits a range of characters in labels that are not permitted by
IDNA2008 or the LDH rule. For example, mDNS encourages the use of
spaces and punctuation in mDNS names (see [RFC6763], section 4.1.3).
It does not restrict which Unicode code points may be used in those
labels, so long as the code points are UTF-8 in Net-Unicode [RFC5198]
format.
Users of applications are, of course, frequently unconcerned with
(not to say oblivious to) the name-resolution system(s) in service at
any given moment, and are inclined simply to use the same names in
different contexts. As a result, the same string might be tried as a
name using different name resolution technologies. If DNS-SD is to
be used in an environment where both mDNS and DNS are to be queried
for services, then the names to be queried will need to be compatible
with the rules and conventions for both DNS and mDNS. This memo
provides advice on how to do that. For the sake of brevity, in what
follows the use of labels that work reliably with both mDNS and DNS
is called the "maximally inter-operative profile", or "MI profile".
It is important to emphasize that this profile is maximally
interoperable in the sense that it encourages the most
interoperability between DNS and mDNS environments; but it does not
guarantee it. IDNA2008 does not constrain DNS operators from putting
any labels they want (including those from outside the IDNA2008-
permissible repertoire) in zones. Rather, this profile is intended
to reduce the scope for variability between systems so that a minimal
(but predictable) subset of possible behaviour is available to
everyone.
1.1. Conventions and terms used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
Sullivan Expires April 21, 2014 [Page 3]
Internet-Draft Labels for DNS-SD October 2013
document are to be interpreted as described in RFC 2119 [RFC2119].
Wherever appropriate, this memo uses the terminology defined in
Section 2 of [RFC5890]. In particular, the reader is assumed to be
familiar with the terms "U-label", "LDH label", and "A-label" from
that document. Similarly, the reader is assumed to be familiar with
the U+NNNN notation for Unicode code points used in [RFC5890] and
other documents dealing with Unicode code points. In the interests
of brevity and consistency, the definitions are not repeated here.
The term "owner name" (common to the DNS vernacular) is used here to
apply not just to the names to be looked up in the DNS, but to any
name that might be looked up either in the DNS or using mDNS.
2. The MI Profile
In the following, we make recommendations for how to use DNS-SD where
that use needs to work seamlessly across DNS and mDNS. The
recommendations involve limitations on what labels should (and should
not) be used for names used with DNS-SD. The MI profile applies to
labels, not names.
The MI profile has three rules:
1. If the label is made entirely of LDH code points, then the label
MUST be an LDH label.
2. All LDH code points MUST be folded to lower case.
3. If the label contains any other code point, then the label MUST
be a well-formed U-label.
[[anchor3: Rule 1 is a tautology. I've wondered whether it's needed,
but it makes rule 2 clearer. --ajs@anvilwalrusden.com]]
2.1. The MI Profile and DNS-SD
DNS-SD specifies three portions of the owner name for a DNS-SD
resource record. These are the <Instance> portion, the <Service>
portion, and the <Domain>. The owner name made of these three parts
is called the Service Instance Name. It is worth observing that a
portion may be more than one label long. See [RFC6763], section 4.1.
To be effective, the MI profile is either applied to every label in a
Service Instance Name portion, or it is not applied to that portion
at all. The reason the profile might not be applied to a portion is
because different portions have different functions within the
Sullivan Expires April 21, 2014 [Page 4]
Internet-Draft Labels for DNS-SD October 2013
Service Instance Name: some of them function as control data, and
therefore have special handling applied. Those portions are not
intended for user display.
Because the MI profile is to apply to names that might need to
interoperate with names in the DNS, the profile reduces the scope for
labels to be used with DNS or mDNS. Consequently, some
recommendations from [RFC6763] cannot really be implemented using
names subject to the MI profile. In particular, [RFC6763], section
4.1.3 recommends that rich text, human-readable labels be used, and
includes punctuation and space characters in the examples. Such uses
are incompatible with the MI profile, because spaces and most
punctuation are permitted neither in U-labels nor in LDH labels. In
addition, the same section recommends that labels always be stored
and communicated as UTF-8, even in the DNS. Because IDNA2008
libraries will treat any Unicode-encoded labels as candidate U-labels
and attempt to perform resolution in A-label form, the advice to
store and transmit labels as UTF-8 in the DNS is likely to encounter
problems and is NOT RECOMMENDED. Naturally, because mDNS always uses
UTF-8, mDNS labels SHOULD be transmitted as UTF-8 unless there is
strong reason to suppose that some mDNS responder is using A-labels.
The subset of allowable characters under the MI profile remains the
same, however, so some characters that would be available in mDNS
without the MI profile are not available when the MI profile is in
use.
The reason for rule 2 is merely to reduce potential user confusion.
U-labels cannot contain upper case letters. That restriction extends
to ASCII-range upper case letters that work fine in LDH-labels. It
is confusing that the character "A" works in the DNS when none of the
characters in the label has a diacritic, but does not work when there
is such a diacritic in the label. Therefore, MI profile requires
folding to lower case even traditional DNS labels, in the interests
of maximizing interoperability.
2.1.1. The <Instance> Portion of the Service Instance Name
[RFC6763] is clear that the <Instance> portion of the Service
Instance Name is intended for presentation to users, and therefore
virtually any character is permitted in it. Because the <Instance>
portion may actually be part of the QNAME submitted for DNS
resolution, and because such names are subject to being intercepted
by a system-wide resolver that is IDNA2008-aware, use of the MI
profile on the <Instance> portion of the Service Instance Name is
RECOMMENDED. This will probably reduce some of the utility of the
<Instance> portion, but it provides the benefit that the entire name
can be looked up and used with DNS-SD when using the DNS. [[anchor4:
I am torn by this recommendation. This version is conditioned by a
Sullivan Expires April 21, 2014 [Page 5]
Internet-Draft Labels for DNS-SD October 2013
mental model where a resolution system (more than a DNS resolver, but
including IDNA for instance) looks at a label. If the label has
Unicode characters in it, then the resolver attempts an IDNA2008
transformation on the label; otherwise, it attempts to use the label
in stock DNS operation. It's possible, however, that some systems
pick out things like underscore labels first, and thereby identify
"control" labels that purport to represent particular pieces of
functionality. In that case, the resolver could treat the whole name
differently, and pull off the Instance portion prior to the Service
portion. If it could do that, it could use straight UTF-8, spaces,
punctuation, and everything else. I'm sceptical of the reliability
of this, though, so it seems to me it'd be better to apply the
profile to anything that wasn't a control label.
--ajs@anvilwalrusden.com]]
2.1.2. The <Service> Portion of the Service Instance Name
DNS-SD includes a <Service> component in the Service Instance Name.
This component is not really user-facing data, but is instead control
data embedded in the Service Instance Name. This component includes
so-called "underscore labels", which are labels prepended with U+005F
(_). The underscore label convention was established by DNS SRV
([RFC2782]) for identifying metadata inside DNS names. A system-wide
resolver (or DNS middlebox) that cannot handle underscore labels will
not work with DNS-SD at all, so it is safe to suppose that such
resolvers will not attempt to do special processing on these labels.
Note that underscore labels do not meet the requirements of the MI
profile, so the MI profile MUST NOT be applied to the <Service>
portion of the Service Instance Name.
2.1.3. The MI Profile and the <Domain> Portion of the Service Instance
Name
The <Domain> portion of the service instance name forms an integral
part of the QNAME submitted for DNS resolution, and a system-wide
resolver that is IDNA2008-aware is likely to interpret labels with
UTF-8 in the QNAME as candidates for IDNA2008 processing. Therefore,
use of the MI profile on such names is RECOMMENDED, unless there is
strong evidence that no resolvers in the resolution chain will
attempt to perform a U-label to A-label transformation during lookup,
and that the actual DNS server will have U-labels rather than
A-labels stored. In practice, these restrictions will permit plain
UTF-8 lookups in special conditions (e.g. on a local network with a
DNS server and careful administration) only.
Sullivan Expires April 21, 2014 [Page 6]
Internet-Draft Labels for DNS-SD October 2013
3. Acknowledgements
The author gratefully acknowledges the insights of Kerry Lynn.
4. IANA Considerations
This memo makes no requests of IANA.
5. Security Considerations
This memo recommends a subset of available characters for use in DNS-
SD-related queries, consistent with the rules of mDNS and IDNA2008.
The security considerations of those protocols apply broadly to this
memo, but this memo introduces no additional security considerations
on its own.
6. References
6.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC6763] Cheshire, S. and M. Krochmal, "DNS-Based Service
Discovery", RFC 6763, February 2013.
6.2. Informative References
[RFC0952] Harrenstien, K., Stahl, M., and E. Feinler, "DoD Internet
host table specification", RFC 952, October 1985.
[RFC1034] Mockapetris, P., "Domain names - concepts and facilities",
STD 13, RFC 1034, November 1987.
[RFC1035] Mockapetris, P., "Domain names - implementation and
specification", STD 13, RFC 1035, November 1987.
[RFC2782] Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR for
specifying the location of services (DNS SRV)", RFC 2782,
February 2000.
[RFC5198] Klensin, J. and M. Padlipsky, "Unicode Format for Network
Interchange", RFC 5198, March 2008.
[RFC5890] Klensin, J., "Internationalized Domain Names for
Sullivan Expires April 21, 2014 [Page 7]
Internet-Draft Labels for DNS-SD October 2013
Applications (IDNA): Definitions and Document Framework",
RFC 5890, August 2010.
[RFC5891] Klensin, J., "Internationalized Domain Names in
Applications (IDNA): Protocol", RFC 5891, August 2010.
[RFC5892] Faltstrom, P., "The Unicode Code Points and
Internationalized Domain Names for Applications (IDNA)",
RFC 5892, August 2010.
[RFC5893] Alvestrand, H. and C. Karp, "Right-to-Left Scripts for
Internationalized Domain Names for Applications (IDNA)",
RFC 5893, August 2010.
[RFC5894] Klensin, J., "Internationalized Domain Names for
Applications (IDNA): Background, Explanation, and
Rationale", RFC 5894, August 2010.
[RFC5895] Resnick, P. and P. Hoffman, "Mapping Characters for
Internationalized Domain Names in Applications (IDNA)
2008", RFC 5895, September 2010.
[RFC6762] Cheshire, S. and M. Krochmal, "Multicast DNS", RFC 6762,
February 2013.
Author's Address
Andrew Sullivan
Dyn
150 Dow St.
Manchester, NH 03101
U.S.A.
Email: asullivan@dyn.com
Sullivan Expires April 21, 2014 [Page 8]